Directional Controls

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Directional Controls"

Transcription

1 Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO /10 Released 5/94 681

2 able of Contents General Information DG17S-8 asic Characteristics Installation Data Mounting Interface Shifting ction DG17S4-10 asic Characteristics Mounting Interface Shifting ction Mounting osition Service Information Code DG17S DG17S-8 Maximum Flow Rating DG17S-8 Recommended Flow Rating Oil Flow Directions DG17S-8 ressure Drop DG17S-8 Installation Dimensions DG17S-8 Subplates & olt Kits Code DG17S DG17S-8 Maximum Flow Rating DG17S4-10 ressure Drop DG17S4-10 Installation Dimensions DG17S4-10 Subplates & olt Kit pplication Data

3 Introduction General Description hese valves are generally used to control the direction of flow in a hydraulic circuit. his, in turn, would control the direction of movement of a hydraulic cylinder, or the rotation of a fluid motor. DG17S-8 Lever Operated DG17S4-10 Lever Operated Features and enefits Suitable for the most demanding industrial applications with flow capacities up to l/min (100 USgpm) and rated pressure of 210 bar (3000 psi). High pressure and flow capability for maximum cost-effectiveness. Low shock characteristics to maximize machine life. Solid cast body and core passages for maximum strength and minimal pressure drop. Designed and backed by Vickers, with over 70 years as the global leader in fluid power and motion control. 3

4 General Information DG17S-8 asic Characteristics Max. pressure: 210 bar (3000 psi) Max. flow: l/min (100 USgpm) Max. pressure port : bar (2000 psi) Weight spring centered/detented: ,5 kg (29.8 lbs.) Weight spring offset: kg (33 lbs.) Installation Data Drain connection must be piped directly to tank through a surge free line so there will be no back pressure at this port. Mounting Interface ISO NF D08 CEO 8 ort connections are made by mounting valves on a subplate or manifold having mounting dimensions which conform to NF-D08 (ISO ) pattern. DG17S4-10 asic Characteristics Max. pressure: 210 bar (3000 psi) Max. flow: 341 l/min (90 USgpm) Max. pressure port : bar (3000 psi) Weight: ,6 kg (94 lbs.) Weight (Subplate): ,2 kg (38 lbs.) he DG17, lever operated valves are ideally suited for applications requiring a manually operated, four-way directional valve. Mounting Interface ISO NF D10 ort connections are made by mounting the valves on a subplate or manifold having mounting dimensions which conform to NF-D10 (ISO ) pattern. Shifting ction Spring offset valves are spring positioned unless lever is actuated. No-spring detented valves maintain the spool position last selected. Machine vibration, heat, improper circuitry and externally induced shocks may cause no-spring detented valves to shift prematurely. Spring centered models return valve spool to center position by centering springs when lever pressure falls below minimum requirement. CUION Surges of oil in a common tank line serving these and other valves can be of sufficient magnitude to cause inadvertent shifting of these valves. his is particularly critical in the no-spring detented type valves. Separate tank lines or a vented manifold with a continuous downward path to tank is necessary. Mounting osition No-spring detented valves must be installed with the longitudinal axis horizontal for good machine reliability. he mounting position of spring-offset models is unrestricted. Drain connection must be piped directly to tank through a surge free line so there will be no back pressure at this port. NOE ny sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore, should be cycled periodically to prevent this from happening. Service Information Refer to specific Vickers parts drawing for service parts information. complete parts breakdown is contained in this drawing. Order by literature number. DG17S-8-*/C/N I-3441-S DG17S I-3564-S 4

5 Lever Operated Directional Valves Code Directional Control Manifold or subplate mounted; manual lever operated; 4-way flow direction. Rated pressure 210 bar (3000 psi). Interface NF-D08 (ISO ) 8 - Flow l/min (100 USgpm) 3 4 Spool ypes 0, 2, 3, 4, 6, 8, 33 - (See flow rating tabulations for descriptions.) Spool/Spring rrangement - Spring offset C - Spring centered N - No-spring detented 5 Design Number Subject to change. Installation dimensions remain as shown for design numbers 10 through 19 models. 6 Spring Offset LH - Offset to. (Omit for offset to models shown.) DG17S-8 Max. Flow Rating Code DG17S-8-0C-10 DG17S DG17S-8-0N-10 DG17S-8-2C-10 DG17S DG17S-8-2N-10 DG17S-8-3C-10 DG17S-8-3N-10 -C- -Nl/min 70 bar (1000 psi) 140 bar (2000 psi) 210 bar (3000 psi) -- l/min 265 (70) l/min -C- -Nl/min 303 (80) -- l/min 265 (70) l/min -C- -Nl/min 227 (60) -- l/min 265 (70) 265 (70) l/min DG17S-8-4C-10 DG17S-8-4N (80) 303 (80) 303 (80) DG17S-8-6C-10 DG17S DG17S-8-6N (50) 133 (35) 95 (25) DG17S-8-8C-10 DG17S-8-8N (80) 303 (80) 303 (80) DG17S-8-33C-10 DG17S DG17S-8-33N (50) 133 (35) 95 (25) 5

6 DG17S-8 Flow Ratings Spring Centered -C- Spring Offset -- No-Spring Detented -N- ll Spools 0, 2, 6 & 33 ll Spools Standard Spool ypes Recommended Flow Capacity at 210 bar (3000 psi) Center osition & Spool ype Description Center osition l/min DG17S-8-0C-10 DG17S DG17S-8-0N-10 0 Opens to all ports 170 (45) DG17S-8-2C-10 DG17S DG17S-8-2N-10 2 Closed to all ports 170 (45) DG17S-8-3C-10 DG17S-8-3N-10 3 Closed & open to 170 (45) DG17S-8-4C-10 DG17S-8-4N-10 4 andem to closed crossover 170 (45) DG17S-8-6C-10 DG17S DG17S-8-6N-10 6 Closed only open & to 170 (45) - C & N 95 (25) - DG17S-8-8C-10 DG17S-8-8N-10 8 andem to open crossover 170 (45) DG17S-8-33C-10 Full flow Restricted flow DG17S DG17S-8-33N Closed open & to over tapers See Direction of Flow Chart, next page. Center position applies to: 1. Spring centered models and no-spring detented models at intermediate position #2. 2. Spring offset models at center crossover. 170 (45) Direction of Oil Flow for Lever ositions Spool ype osition No.1 (Extreme Out) osition No. 3 (Extreme In) Normal for Spring Offset 0, 2, 3, 6, 33 r. Cyl. Cyl. r. Cyl. Cyl. 4 & 8 r. Cyl. Cyl. r. Cyl. Cyl. 6

7 DG17S-8 ressure Drop Spool ype & Center osition on Center Example: Find the pressure drop from for type 2 spool. Using the table above find numeral 2 in spool type column. o the right of numeral 2, find the reference curve number 3 under column. he pressure drop from for type 2 spool would be obtained on curve number ressure drop curves give approximate pressure drop ( ) when passing 21 cst (100 SUS) fluid(s) having.865 specific gravity. 2. For any other viscosity(s), the pressure drop ( ) will change as follows: 3. For any other specific gravity (G 1 )*, the pressure drop ( 1 ), will be approximately: 1 = (G 1 /G) * Specific gravity of fluid may be obtained from its producer. he value is higher for fire-resistant fluids than for oil. ressure Drop - bar ressure vs. Flow Curves 21,0 14,0 Flow - USgpm , Flow - l/min ressure Drop - psi 7

8 DG17S-8 Installation Dimensions Lever Operated Spring Centered DG17S-8-*C-10 No-Spring Detented DG17S-8-*N-10 Millimeters (inches) port 23,00 (.906) 53,2 (2.09) ressure port 23,00 (.906) 46,0 (1.81) 92,0 (3.62) Normal osition (Extreme in) 27,8 (1.09) ort osition #1 (Extreme out) 77,0 (3.03) 130,2 (5.12) 153,0 (6.02) osition #3 (Extreme in) 13,50 (.531) (6 holes for mounting) ort 314,6 (12.38) Spring Offset DG17S-8-*-10 (See table below) 234,9 (9.25) osition #2 (Intermediate) 168,6 (6.64) ort test connection UNF-2 straight thread ort test connection UNF-2 straight thread Identification late: Showing flow direction information and model code number. 83,1 (3.27) 81,0 (3.19) 111,0 (4.37) C bore 4 places 43 (1.69) 55,8 (2.20) 53,0 (2.09) 100,7 (3.96) 184,0 (7.24) 291,1 (11.46) 31,0 (1.22) 6.4 (.25) (2 rest pins) Mounting surface (seals furnished) 57,0 (2.25) 114,0 (4.50) 1,5 (.06) 6,4 (.25) Lever Shifting Force/Dimensions Spool Dimension Dimension 0 2, 3, 6, 33 4, 8 79,5 (3.13) 79,5 (3.13) 96,0 (3.78) 334,4 (13.16) 334,4 (13.16) 350,9 (13.82) * t recommended flow and maximum operating pressure. * Force (approx.) kg (lbs.) 6,8 (15) 9,1 (20) 11,3 (25) 8

9 DG17S-8 Subplates & olt Kits Valves, subplates and mounting bolts must be ordered separately. Example: (1) DG17S-8-2C-10 Valve (1) DGSM Subplate (1) KDG Inch olt Kit or (1) KDG8-655M Metric olt Kit DGSM /16 Mounting Subplates 11,0 (0.43) 19,1 (0.75) When subplate is not used, a machined pad must be provided for mounting. ad must be flat within 0,0127 mm (.0005 inch) and smooth within 1,6 µm (63 microinch). Mounting bolts, when provided by customer, should be SE grade 7 or better. X External pilot pressure conn. 12,9 (.508) thru UNF-2 thd. For.375 O.D. tubing from rear - 2 holes, X & Y 11,0 (0.43) conn. 180,9 (7.12) 29,5 (1.16) Cyl. conn. 77,1 (3.04) 94,6 (3.72) 112,8 (4.44) 112,8 (4.44) 203 (7.99) UNC-2 thd 6 holes (subplate with M12 x 1.75 metric screw holes available on request. DGSM : 17,5 Cyl. conn. 23,8 (.94) thru (0.69) SE str. thd UN-2 thd. ubing O.D..750 DGSM : Cyl. conn. 24,6 (.97) thru SE str. thd UN-2 thd. ubing O.D DGSM Mounting Subplate 120,7 (4.75) Cyl. conn. 97 (3.81) 14,3 (.56) 19,1 (.75) 12,7 (.50) 92,2 (3.63) 19,1 (.75) 73,1 (2.88) 92,2 (3.63) 167,8 116 (6.61) (4.57) 94,6 (3.72) ressure inlet conn. Y ilot valve drain conn. (For externally drained 4,87 pilot valves) and drain (0.19) conn. 126,2 (4.97) 100,8 (3.97) 73,1 (2.88) Cyl. conn. 25,4 (1.00) 74,7 (2.94) 35 (1.38) X External pilot pressure conn. 10,3 (.406) -4 holes for mounting 10,3 (.406) -4 holes for mounting 146 (5.75) 14,4 Y ilot valve drain conn. (.55) (For externally drained 29,5 pilot valves) and drain (1.16) conn. ressure inlet conn. 55,3 (2.18) 77,1 (3.04) 100,9 (3.97) 130,3 193,5 (5.13) (7.62) 17,5 (.69) 43,7 (1.72) conn. 65,9 (2.59) DGSM : SE str. thd ubing O.D

10 Lever Operated Directional Valve Code Directional Control 2 Mounting ype G - Manifold or Subplate 3 Valve Operator 17 - Manual lever operated 4 Sliding Spool 5 Flow Direction 4 - Four-way - spring offset model only 6 Valve Size 10 - ISO , NF-D10 interface 7 Spool ype 0, 2, 4, 6, 8, 33 8 Spool/Spring rrangement - Spring offset C - Spring centered N - No-spring, detented 9 Design Number Subject to change. Installation dimensions remain as shown for design numbers 50 through Design has top located nameplate. -53 Design has 1 / 4 N test ports. 10 Left Hand lank - Omit if not required. Flow Direction & Rating No Spring Detented N Numbers Spring Centered C DG17S4-100N DG17S4-100C DG17S-102N DG17S4-102C DG17S4-104C DG17S4-106N DG17S4-106C Spring Offset DG17S4-100 DG17S4-102 DG17S4-106 Spool ype 0 - Open center all ports 2 - Closed center all ports 4 - andem Closed crossover 6 - Closed center only Flows 210 bar (3000 psi) 284 (75) 341 (90) 189 (50) 341 (90) Direction of oil flow for valve spool position #2 Intermediate ress. ort & ort ress. ort & ort locked ress. ress. ort & ort blocked ort ress. locked ort & ort #3 Extreme in #1 Extreme out ress. ort ress. ort ort ress. ort ort ress. ort ort ress. ort ort ort ort DG17S4-108C 8 - andem Open crossover 189 (50) ress. ress. ort & ort blocked ort ort ress. ort ort DG17S4-1033C 33 - Closed center leed & 341 (90) ress. locked ort & ort ress. ort ort ress. ort ort 10

11 DG17S4-10 Series Functional Symbols Spring offset - No-spring - Detented N Spring centered - C osition # ressure Drop Spool ype to to to to ,2 bar (47 psi) 2,5 bar (36 psi) 4,1 bar (60 psi) 2,3 bar (34 psi) 3,5 bar (51 psi) 2,5 bar (36 psi) 4,2 bar (61 psi) 3,8 bar (55 psi) 8,3 bar (120 psi) 2,2 bar (32 psi) 8,1 bar (118 psi) 3,7 bar (53 psi) 3,0 bar (44 psi) 2,7 bar (38 psi) 5,5 bar (80 psi) 2,6 bar (37 psi) 3,9 bar (57 psi) 2,7 bar (38 psi) 4,6 bar (67 psi) 3,7 bar (53 psi) 9,2 bar (134 psi) 2,1 bar (30 psi) 8,9 bar (129 psi) 3,5 bar (51 psi) to Centered 3,5 bar (51 psi) 3,7 bar (54 psi) 3,6 bar (52 psi) 1. Figures in the pressure drop chart give approximate pressure drops ( ) when passing 379 l/min (100 USgpm) flow (Q) of 100 SUS fluid(s) having.865 specific gravity. 2. For any other flow rate (Q 1 ), the pressure drop ( 1 ) will be approximately: 1 = (Q 1 /Q 2 ) 2 3. For any other viscosity(s), the pressure drop ( ) will change as follows: 4. For any other specific gravity (G 1 )*, the pressure drop ( 1 ), will be approximately: 1 = (G 1 /G) * Specific gravity of fluid may be obtained from its producer. he value is higher for fire-resistant fluids than for oil. 11

12 DG17S4-10 Installation Dimensions Lever Operated Directional Valves Spring Offset, Spring Centered & Detented Four-way Spring Centered - DG17S4-10*C-5* Four-way No Spring w/detent - DG17S4-10*N-5* Four-way Spring Offset - DG17S-10*-5* Millimeters (inches) port 76,2 (3.00) 190,5 (7.50) ressure port 19,8 (.781) 6 holes for mounting. Maximum torque 285 Nm (210 ft.lbs.) 158,8 (6.25) 57,2 (2.25) 79,2 (3.12) 19,1 (.75) R. ort osition #1 extreme out 114,3 (4.50) ort osition #3 extreme in (normal spring offset position) Handle shifting force kg (31 lbs.) for no flow (50 lbs.) for rated flow and pressure condition. 46,7 (1.84) Spool ype Dimension (3.94) 100 (3.94) 120,7 (4.75) ,7 (4.75) 100 (3.94) 100 (3.94) 301,8 (11.88) osition #2 intermediate -50 design nameplate est connections UNF-2 thd. 1 / 4 N -50 design Spring offset only 52,1 (2.05) 120,7 (4.75) -53 design nameplate 165,1 (6.50) 7,1 (.28) 137,4 (5.41) 86,6 (3.41) 82,6 (3.25) 438,2 (17.25) 65 (2.56) 288,6 (9.00) 22,4 (.88) 35,1 (1.38) 6,4 (.25) 98,6 (3.88) 196,9 (7.75) Gasket surface for mounting. Sealing rings furnished. Offset models have an internal spring which returns the spool when the lever is released. 12

13 DG17S4-10 Subplates & olt Kit Valves, subplates and mounting bolts must be ordered separately. Example: One (1) DG17S4-102C-5* Valve One (1) KDG olt Kit When subplate is not used, a machined pad (as indicated by subplate shaded area, below, must be provided for mounting. ad must be flat within 0,0127 mm (.0005 inch) and smooth within 1,6 µm (63 microinch). Mounting bolts, when provided by customer, should be SE grade 7 or better. Mounting Subplate DGSM-10(*) -11 connection 28,6 (1.125) (4 holes) - system ports UN-2 thd. (from rear) (4 holes) - system connections. DG3M / 4 N thd. DGSM-10X / 2 N thd. DGSM-10Y-11 2 N thd. 16,7 (.656) (4 holes for mounting) 158,8 (6.25) 130 (5.12) 124 (4.88) 114 (4.47) 304,8 (12.0) 266,7 190,5 (10.5) (7.5) 26,9 (1.06) 147,6 (5.81) 82,6 (3.25) 35,1 (1.38) ressure inlet connection UNC-2 thd (6 holes) 44,5 (1.75) 9,5 (.375) drill 26,2 (1.03) deep 39,6 (1.56) 22,9 (.90) 25,4 (1.00) 196,9 (7.75) 7,1 (.281) - 7,9 (.31) deep (2 holes for rest pins) ort connection 130 (5.12) 160,3 (6.31) 41,1 (1.62) 114,3 (4.50) ort connection 22,4 (.88) 28,6 (1.125) drill 22,4 (.88) deep (4 holes) 19,1 (.75) R. Manifolds or other mounting interface can be drilled to 33,3 (1.312) dia. Fitting size and fitting spacing limit the subplate port size to 28,6 (1.125) dia. 13

14 pplication Data Fluid Cleanliness roper fluid condition is essential for long and satisfactory life of hydraulic components and systems. Hydraulic fluid must have the correct balance of cleanliness, materials, and additives for protection against wear of components, elevated viscosity, and inclusion of air. Essential information on the correct methods for treating hydraulic fluid is included in Vickers publication 561 Vickers Guide to Systemic Contamination Control available from your local Vickers distributor or by contacting Vickers, Incorporated. Recommendations on filtration and the selection of products to control fluid condition are included in 561. Recommended cleanliness levels, using petroleum oil under common conditions, are based on the highest fluid pressure levels in the system and are coded in the chart below. Fluids other than petroleum, severe service cycles, or temperature extremes are cause for adjustment of these cleanliness codes. See Vickers publication 561 for exact details. System ressure Level bar (psi) Vickers products, as any components, will operate with apparent satisfaction in fluids with higher cleanliness codes than those described. Other manufacturers will often recommend levels above those specified. Experience has shown, however, that life of any hydraulic component is shortened in fluids with higher cleanliness codes than those listed below. hese codes have been proven to provide a long, trouble-free service life for the products shown, regardless of the manufacturer. roduct <70 (<1000) ( ) 210+ (3000+) Vane umps FIxed 20/18/15 19/17/14 18/16/13 Vane umps Variable 18/16/14 17/15/13 iston umps Fixed 19/17/15 18/16/14 17/15/13 iston umps Variable 18/16/14 17/15/13 16/14/12 Directional Valves 20/18/15 20/18/15 19/17/14 ressure/flow Control Valves 19/17/14 19/17/14 19/17/14 CMX Valves 18/16/14 18/16/14 17/15/13 Servo Valves 16/14/11 16/14/11 15/13/10 roportional Valves 17/15/12 17/15/12 15/13/11 Cylinders 20/18/15 20/18/15 20/18/15 Vane Motors 20/18/15 19/17/14 18/16/13 xial iston Motors 19/17/14 18/16/13 17/15/12 Radial iston Motors 20/18/14 19/17/13 18/16/13 Fluids and Seals Flourocarbon seals are standard and are suitable for use with phosphate ester type fluids or their blends, water glycol, water-in-oil emulsion fluids and petroleum oil. 14

Directional Controls

Directional Controls Vickers Directional Controls DG5S-8 and DG5S-H8 wo-stage, Solenoid Controlled, ilot Operated, Four-Way Directional Valves Revised 11/94 591 Introduction General Description he DG5S-8 and DG5S-H8 are two-stage

More information

KDG3V-5/7/8, 10 Series

KDG3V-5/7/8, 10 Series Vickers roportional Valves KDG3V-5/7/8, 1 Series Single-Stage with Hydraulic ilot Operation High Flow roportional Directional Control Valves asic Characteristics Max. pressure.......... up to 35 bar (5

More information

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93 Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct

More information

Check Valves. Pilot Operated Check Valves 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Vickers. Basic Characteristics.

Check Valves. Pilot Operated Check Valves 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Vickers. Basic Characteristics. Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum

More information

Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations

Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................

More information

Pilot Operated Check Valves Model SV/SL (Series 4X)

Pilot Operated Check Valves Model SV/SL (Series 4X) R 68/06.98 Size 0 to 0 Pilot Operated Check Valves Model SV/SL (Series ) 600 PSI (5 bar)... 5 GPM (550 L/min) R 68/06.98 Replaces: 05.9 Pilot operated check valve, with leak-free closure in checked direction

More information

Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits

Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot

More information

Piston Pumps. PVE Piston Pumps. Vickers

Piston Pumps. PVE Piston Pumps. Vickers Vickers Piston Pumps PVE Piston Pumps PVE12 Variable Displacement Single Pump PVE19 / PVE21 Variable Displacement Single & Thru-Drive Pumps PVE4* 25V Integrated Models GB C 223 A.1 Table of Contents Introduction.................................................................................................

More information

THROTTLE MODULES TC1G-01 / 03 (1 / 8, 3 / 8) THROTTLE AND CHECK MODULES TC2G-01 / 03 (1 / 8, 3 / 8)

THROTTLE MODULES TC1G-01 / 03 (1 / 8, 3 / 8) THROTTLE AND CHECK MODULES TC2G-01 / 03 (1 / 8, 3 / 8) THROTTLE MOULES - / 3 ( / 8, 3 / 8) THROTTLE AN CHECK MOULES TCG- / 3 ( / 8, 3 / 8) Gasket Specifications / Model Number esignation Up to MPa (363 PSI), 8 L/min (. U.S.GPM) Pub. EC-3 Used as pilot choke

More information

SystemStak. SystemStak Valves. Vickers

SystemStak. SystemStak Valves. Vickers Vickers SystemStak SystemStak Valves ISO 4401-05 size, 315 bar (40 psi) and 120 l/min (32 USgpm) maximum ratings ressure relief and reducing, sequence, counterbalance, and flow control functions Revised

More information

Pressure Relief Valve, Direct Operated Model DBD (Series 1X)

Pressure Relief Valve, Direct Operated Model DBD (Series 1X) ressure Relief Valve, Direct Operated Model DBD (Series 1X) Sizes 6 to 30... 9150 SI (630 bar) 87 GM (330 L/min) RA 25 402/06.98 Replaces: 05.94 Direct operated, fast response pressure relief valve hree

More information

Vickers. Piston Pumps

Vickers. Piston Pumps Vickers Piston Pumps xial Piston Pumps Fixed and Variable Displacement PF, PF, PF PV /6, PV /, PV /9, PV and PV 9 to SE PV /6, PV /, PV /9 to DIN/ISO 39, Part G-379 Contents asic characteristicts..........................................................................................3

More information

Open center control block in monoblock design MO-40

Open center control block in monoblock design MO-40 Open center control block in monoblock design MO-40 RE 64370 Edition: 02.2015 Replaces: 02.1985 Size 40 Series 1X Maximum working pressure on pump side 350 bar on consumer side 420 bar Maximum flow 680

More information

Ref.nr.: www.hydroflex.nl. Oud-Beijerland Willem Beukelszstraat 1 3261 LV Oud-Beijerland Nederland Telefoon: +31(0)186 620 777

Ref.nr.: www.hydroflex.nl. Oud-Beijerland Willem Beukelszstraat 1 3261 LV Oud-Beijerland Nederland Telefoon: +31(0)186 620 777 Ref.nr.: Oud-eijerland Willem eukelszstraat 1 3261 LV Oud-eijerland elefoon: +31(0)186 620 777 russel 1853 Strombeek - ever elgië elefoon: +32(0)2 267 41 14 elefoon: +31(0)10 283 90 00 Ordering s ypical

More information

Check Valves. Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)

Check Valves. Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) Check Valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 7 L/min (60 USgpm) EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E4 September, 007 - Check

More information

Manapak Sandwich Valves. General Description. Operation. Specifications. Features

Manapak Sandwich Valves. General Description. Operation. Specifications. Features Catalog HY14-252/US Technical Information Series PRDM General Description Series PRDM are direct operated pressure reducing valves that are used to regulate pressure in one area of a hydraulic circuit

More information

Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits.

Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits. Vickers Pressure Relief Pressure Relief and Sequence Valves CG2V-6/8, 1 Series; CG5V-6/8, 2 Series Typical Section CG2V-6*W-1 relief valve Basic Characteristics Maximum pressure.......... 35 bar (5 psi)

More information

Vickers Vane Pumps Single and Double Vane Pumps. Model Series V10, V20, V2010, and V2020 for Industrial Equipment

Vickers Vane Pumps Single and Double Vane Pumps. Model Series V10, V20, V2010, and V2020 for Industrial Equipment Vickers Vane Pumps Single and Double Vane Pumps Model Series V10, V20, V2010, and V2020 for Industrial Equipment The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power

More information

Pressure Relief. Pressure Relief Valves. Vickers

Pressure Relief. Pressure Relief Valves. Vickers Vickers Pressure Relief Pressure Relief Valves Remote Controls, Relief and Sequence Valves, and Single and Multiple Pressure Solenoid and Air Operated Relief Valves 511./EN/1297/A Introduction Remote Controls

More information

Proportional Directional Control Valves

Proportional Directional Control Valves Vickers roportional Valves roportional Directional Control Valves K()DG5V-5/7/8 & KDG5V-10, 1* Series, wo-stage Models without Electrical Feedback ISO 4401 Sizes 05, 07,08 and 10 NSI/93.7M-D07/08/09 his

More information

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 3525VQSV10* ***** ******* 20* Released M 2494 S

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 3525VQSV10* ***** ******* 20* Released M 2494 S Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 3525VQSV10* ***** ******* 20* Released 08 01 95 M 2494 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt

More information

Pilot Operated Check Valves

Pilot Operated Check Valves Pilot Operated Check Valves These check valves allow flow in one direction and prevent flow in the reverse direction, until operated by pilot pressure to allow free reverse flow. The specified cracking

More information

RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007

RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007 Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid

More information

RPE3-04. Functional Description HA 4014 09/2013. Directional Control Valves Solenoid Operated. Replaces HA 4014 10/2010

RPE3-04. Functional Description HA 4014 09/2013. Directional Control Valves Solenoid Operated. Replaces HA 4014 10/2010 Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) HA 4014 09/2013 Replaces HA 4014 10/2010 4/3-, 4/2- way directional control valves with solenoid

More information

HPV SERIES AXIAL PISTON PUMPS

HPV SERIES AXIAL PISTON PUMPS INDEX COMPENSATED VOLUMETRIC THEORETICAL FLOW@ MODEL MAXIMUM CONTINUOUS FLANGE PAGES DISPLACEMENT 17 RPM SERIES MOUNTING.88 CU. IN./REV. 6.67 GPM HPV-6B35 30 PSI SAE A 2-BOLT* 9-15 1.26 CU. IN./REV. 9.55

More information

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51 83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE

More information

Manapak Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM

Manapak Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM Introduction Manapak valves provide a variety of check, flow control, pressure relief and pressure reducing functions in a compact NFPA D03, D05 and D08 sandwich style valve. The NFPA D03 valve body conforms

More information

RJV1-05 2(4) 1. Functional Description HA /2012. Pilot Operated Cartridge Check Valves. Replaces HA /2011

RJV1-05 2(4) 1. Functional Description HA /2012. Pilot Operated Cartridge Check Valves. Replaces HA /2011 Pilot Operated Cartridge Check Valves RJV-05 HA 5 8/0 Size 05 50 bar (600 PSI) 0 L/min (5. GPM) Replaces HA 5 0/0 Cartridge valve for manifold mounting and with subplate with subplate - enables direct

More information

Pressure Relief Valves for Pipe Mounting

Pressure Relief Valves for Pipe Mounting Vickers ressure Relief ressure Relief Valves for ipe Mounting EC-6/1, 1 Series; EC5-6/1, 3 Series ypical Section EC5-1 example asic Characteristics Max. pressure...... 25 bar (3625 psi) Max. flow rates:

More information

DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC

DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC Publ. 1 - EN0709 - A 01 / 2000 / 2500 / FB Replaces : 1 - EN 084 - B L25-10709 - 1 CONTENTS GENERAL CHARACTERISTICS T67GB T6GC - T6ZC T67GB

More information

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES CONTINENTAL HYDRAULICS PR*SP - PR*SPU PILOT OPERATED PRESSURE RELIEF VALVE SERIES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM POWERFUL PR*SP - PR*SPU

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

PowrFlow HPV Series Axial Piston Pumps

PowrFlow HPV Series Axial Piston Pumps PowrFlow HPV Series Axial Piston Pumps HPV SERIES AXIAL PISTON PUMPS RELIABLE POWER FOR ANY HYDRAULIC SYSTEM Product Description What Makes PowrFlow HPV Series Axial Piston Pumps Your Best Buy? Variable

More information

Hydraulic Pressure Control Valves

Hydraulic Pressure Control Valves Webtec Products Limited Hydraulic Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. RV 020 Direct In-Line Relief Valve 1 RV 025 Relief Valve 3 RV 050 Relief

More information

Pressure relief valve, pilot operated

Pressure relief valve, pilot operated ressure relief valve, pilot operated RE 80/10.0 Replaces: 0.0 1/0 ypes D and DW Sizes 10 to Component series Maximum operating pressure 0 bar Maximum flow 0 L/min H988 + H089 able of contents Contents

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

Vickers. Valves. CM2, CM11, RM3 & FM3 Control Valves. For Mobile Equipment. Revised 4/96

Vickers. Valves. CM2, CM11, RM3 & FM3 Control Valves. For Mobile Equipment. Revised 4/96 Vickers Valves CM2, CM11, RM3 & FM3 Control Valves For Mobile Equipment Revised 4/96 33 Introduction The directional valves described in this booklet are more than just directional valves -- they are hydraulic

More information

Variable Displacement Pump AA10VSO

Variable Displacement Pump AA10VSO Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi

More information

Vickers Vane Pumps V Series - Low Noise Vane Pumps. High Performance Intravane Pumps For Industrial Applications

Vickers Vane Pumps V Series - Low Noise Vane Pumps. High Performance Intravane Pumps For Industrial Applications Vickers Vane Pumps V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power

More information

Check Valves Valve locator

Check Valves Valve locator Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()

More information

Pilot Operated Pressure Relief Valves Series R4V / R6V

Pilot Operated Pressure Relief Valves Series R4V / R6V Characteristics Series RV / R6V Pilot operated pressure relief valves series RV (DIN 230 Form D) and R6V (DIN 230 Form E) consist of a manually adjusted pilot stage and a seated type main stage. A vent

More information

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released M 2497 S

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released M 2497 S Service Data Vickers Vane Pumps Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released 08 01 95 M 2497 S 10 SAE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin Bolt

More information

COMPACT CATALOGUE MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOGUE MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOGUE MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open centre and closed centre hydraulic systems. H Fittedwithamainpressurereliefvalve.

More information

Republic/Manatrol Hydraulic and Pneumatic Control Valves. Catalog HY /US FOR POSITION ONLY

Republic/Manatrol Hydraulic and Pneumatic Control Valves. Catalog HY /US FOR POSITION ONLY Republic/Manatrol Hydraulic and Pneumatic Control Valves Catalog HY14-3000/US FOR POSITION ONLY Republic/Manatrol Valves Hydraulic and Pneumatic Controls WARNING FAILUR OR IMPROPR SLCTION OR IMPROPR US

More information

005 SERIES MODULAR VALVES. Pub. EC-1401. General Information Up to 25 MPa (3630 PSI), 10 L /m in (2.6 U.S.GPM) Modular Valve Type

005 SERIES MODULAR VALVES. Pub. EC-1401. General Information Up to 25 MPa (3630 PSI), 10 L /m in (2.6 U.S.GPM) Modular Valve Type 5 SERIES General Information Up to 5 Ma (3 SI), 1 L /m in (6 USGM) ub EC-11 MODULR VLVES hese modular valves have the same mounting surface as those for the DSG-5 solenoid operated directional valves and

More information

General Size Mounting 2-port in-line flange SAE 61 Mounting Position Ambient Temprature Hydraulic Maximum Operating Pressure

General Size Mounting 2-port in-line flange SAE 61 Mounting Position Ambient Temprature Hydraulic Maximum Operating Pressure Technical Information Pilot Operated Check Valve Series C5P General Description Series C5P pilot operated check valves have a similar design to the subplate mounted SVL series. The SAE flanges allow to

More information

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE NFPA D03 MOUNTING INTERFACE ISO 4401-03-02-0-94 (CETOP 4.2-4-03-250) SUBPLATE MOUNTING NFPA D03 ISO 4401-03 (CETOP 03) NG6 Pressure max 4060

More information

Series PVP Variable Volume Piston Pumps

Series PVP Variable Volume Piston Pumps Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference

More information

Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage

Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, 02 T A Replaces: MVP 01 T A Modification from former edition Variable displacement axial piston pumps, DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) for open circuit

More information

PVH131/141 Variable Displacement Piston Pump - 11 Design

PVH131/141 Variable Displacement Piston Pump - 11 Design Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque

More information

COMPACT CATALOGUE MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOGUE MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOGUE MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open centre and closed centre hydraulic systems. H Fitted with a main pressure relief

More information

Pressure reducing valve, direct operated, Type ZDR 6 D

Pressure reducing valve, direct operated, Type ZDR 6 D RE 26 57/2.3 Replaces:.2 Pressure reducing valve, direct operated, ype ZDR 6 D Nominal size 6 Series 4X aximum operating pressure 2 bar aximum flow 5 L/min K 4279/ ype ZDR 6 DP2 4X/ Y Overview of contents

More information

Vane Pump & Motor Design Guide

Vane Pump & Motor Design Guide Vickers Service Guide Vane Pump & Motor Design Guide For Mobile Equipment Revised 8/98 353 Introduction Over the past twenty years, the application of hydraulics in agricultural, construction and materials

More information

Chapter 5: Flow Valves

Chapter 5: Flow Valves Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free

More information

Directional Controls. Solenoid Operated Directional Valve DG4V-3S, EN 490 For Mobile Equipment

Directional Controls. Solenoid Operated Directional Valve DG4V-3S, EN 490 For Mobile Equipment Vickers Directional Controls Solenoid Operated Directional Valve DGV-3S, EN 90 For Mobile Equipment Flows to 0 l/min (10.5 USgpm), * Design P, A & B Pressures to 350 bar (5000 psi), T Pressures to 10 bar

More information

Displacements cm 3 /r [in 3 /r] Design code -002 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Char-Lynn HP30 Motor

Displacements cm 3 /r [in 3 /r] Design code -002 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Char-Lynn HP30 Motor Char-Lynn HP30 Motor Design code -002 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for Performance For the past 55 years, Char-Lynn has been recognized

More information

Check/ Pilot Controlled Check Valves

Check/ Pilot Controlled Check Valves heck/ Pilot ontrolled heck s Type Graphic Symbols Max. Operating Pressure U.S.GPM.3. L/min Page In-Line (IT) 3 heck s (33) Right ngle (RT/RG) 3 98 Right ngle, langed onnection (R) Pilot Operated heck s

More information

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm) Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers

More information

VER03MG CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE VER03MG - PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE

VER03MG CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE VER03MG - PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE CONTINENTAL HYDRAULICS VER03MG PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM PRECISE VER03MG PROPORTIONAL

More information

DENISON HYDRAULICS high performance hydraulic new vane motor series M5B - M5BS - M5BF

DENISON HYDRAULICS high performance hydraulic new vane motor series M5B - M5BS - M5BF Back to Content DENISON HYDRAULICS high performance hydraulic new vane motor series M5B - M5BS - M5BF Publ. 2 - EN1702 - A 01 / 99 / 2500 / FB Replaces : CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12

More information

Pressure relief valves Size 6

Pressure relief valves Size 6 Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are

More information

High Speed Hydraulic Motors. Catalog HY /NA

High Speed Hydraulic Motors. Catalog HY /NA High Speed Hydraulic Motors Catalog HY13-20-0-001/NA 341 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed range of

More information

RA 23 178/08.99. Functional description 1/10. 4/3-, 4/2- and 3/2 Directional Control Valves Model WE 6.. /E, Series 6X with wet pin AC or DC solenoids

RA 23 178/08.99. Functional description 1/10. 4/3-, 4/2- and 3/2 Directional Control Valves Model WE 6.. /E, Series 6X with wet pin AC or DC solenoids 4/3-, 4/- and 3/ Directional Control Valves Model WE 6.. /E, Series 6X with wet pin C or DC solenoids Size 6 (D 03) up to 5100 SI (350 ar) up to 1 GM (80 L/min) R 3 178/06.98 R 3 178/08.99 Replaces: 06.98

More information

Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19

Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19 Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR

More information

Steering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min

Steering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device

More information

H/HC Type Pressure Control Valves

H/HC Type Pressure Control Valves PRSSUR ONTROLS H/H Type Pressure ontrol Valves These valves are hydraulically damped, direct operated, pressure control valves which can be actuated by internal or external pilot pressure. H Type Pressure

More information

Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications

Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Technical Catalog PVQ10 PVQ13 PVQ20 PVQ25 PVQ32 PVQ40 PVQ45 Table of Contents Introduction......................................................................................................

More information

Rexroth Hydraulics. Pressure relief valve, direct operated, Type DBD RE /03.98

Rexroth Hydraulics. Pressure relief valve, direct operated, Type DBD RE /03.98 RE 25 402/03.98 Replaces: 08.97 ressure relief valve, direct operated, ype DBD Nominal sizes 6 to 30 Series 1X Maximum operating pressure 630 bar Maximum flow 330 L/min H/A 5585/96 ype DBD 1X/ Contents

More information

CHM /112 ED PILOT OPERATED CHECK VALVE SERIES 10. Q max 30 l/min MODULAR VERSION ISO (CETOP R02) p max 320 bar MOUNTING SURFACE

CHM /112 ED PILOT OPERATED CHECK VALVE SERIES 10. Q max 30 l/min MODULAR VERSION ISO (CETOP R02) p max 320 bar MOUNTING SURFACE 65 00/2 ED CHM2 ILO OERED CHECK VLVE SERIES 0 MODULR VERSION ISO 440-02 (CEO R02) p max 320 bar Q max 30 l/min MOUNING SURFCE OERING RINCILE ISO 440-02-0-0-05 (CEO 4.2-4-R02-320) he CHM2 valve is a hydraulically

More information

IFP SINGLE VANE PUMPS V10/V20 - V210/V230

IFP SINGLE VANE PUMPS V10/V20 - V210/V230 IFP SINGLE VANE PUMPS V10/V20 - V210/V230 * High Performance * Low Cost * Extended Life * Versatile * Compact * Quiet Operation * Balanced Cartridge Design C:\Program Files\ACAD2000\CATELOG\NDcatalogue\pictures\V10&V20.bmp

More information

Vickers Control Valve

Vickers Control Valve Vickers Control Valve General Information escription The HST-3 is a high performance electro-hydraulic proportional relief valve with integral electronics. The valves extremely linear performance is attributed

More information

Max. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting

Max. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting Remote ontrol Relief s This valve is used as a remote control valve for pilot operated type pressure control valves. RESSURE ONTROLS EI--01-0 Graphic Symbol Specifications Threaded onnection Model ation

More information

2-way flow control valve Type 2FRM 6

2-way flow control valve Type 2FRM 6 RE /0.0 Replaces:.0 -way flow control valve Type FRM Nominal size Series X Maximum operating pressure bar ) Maximum flow L/min ) When used in conjunction with a rectifier plate up to 0 bar H//D /97 + H//D

More information

p max 350 bar Q max 80 l/min

p max 350 bar Q max 80 l/min 83 230/215 ED DSE3J DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL FEEDBACK AND INTEGRATED ELECTRONICS SUBPLATE MOUNTING ISO 4401-03 (CETOP 03) p max 350 bar Q max 80 l/min MOUNTING INTERFACE OPERATING PRINCIPLE

More information

Axial Piston Pumps for Open Circuits in Mobile, Industrial and Marine Applications

Axial Piston Pumps for Open Circuits in Mobile, Industrial and Marine Applications xial Piston Pumps for Open Circuits in Mobile, Industrial and Marine pplications Contents 1. General Description...IFC 2. Specifications...1 3. Model Coding...2 4. Functional Description of Regulators...4

More information

Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division

Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12

More information

VARIABLE VANE PUMPS V3

VARIABLE VANE PUMPS V3 VARIABLE VANE PUMPS V3 (series 30 and 40) Nominal sizes 12; 25; 40; 63 up to p n 100 bar V g 8.5; 19; 32; 47 cm 3 /rev KE 1015 11/02 replaces 07/97 easy commissioning due to automatic bleed facility low

More information

Precision Machinery Company. Swash-plate Axial Piston Pump K3VL

Precision Machinery Company. Swash-plate Axial Piston Pump K3VL Precision Machinery Company Swash-plate xial Piston Pump K3VL CONTENTS Specifications and Features 2 1. Ordering Code 1-1. Pump Options 3 1-2. Regulator Options 4 2. Technical Information 2-1. Technical

More information

Axial Piston Fixed Motor AA2FM (A2FM)

Axial Piston Fixed Motor AA2FM (A2FM) Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Motor 2FM (2FM) R 91001/03.08 1/36 Replaces: 07.05 Technical data sheet Series 6 Sizes

More information

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow 1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control

More information

Pilot operated check valves, Types SV and SL...30B/ Huade América 1

Pilot operated check valves, Types SV and SL...30B/ Huade América 1 Pilot operated check valves, s SV and SL...30B/ Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pilot operated check valves, s SV and SL...30B/ size 10 to 30 up to 31.5 Pa up to 400L/min

More information

ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m

ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4

More information

Pressure relief valves

Pressure relief valves ressure relief valves RE 25 860/10.08 Replaces: RE 25 860/03.05 ressure relief valves 1/12 0 532... Valves for line connections Valves for block installation p max. = 350 bar Q max. = 120 l/min Contents

More information

Safety for Hydraulics Leak free check valve, pilot operated, series ERV Cartridge type, two stage

Safety for Hydraulics Leak free check valve, pilot operated, series ERV Cartridge type, two stage Safety for Hydraulics Leak free check valve, pilot operated, series Cartridge type, two stage prevents a load from falling if a burst occurs in feed pipe hardened seat and poppet prevents creep of hydraulically

More information

Proportional Valves. Proportional Directional and Throttle Valves Solenoid Operated

Proportional Valves. Proportional Directional and Throttle Valves Solenoid Operated Vickers roportional Valves roportional Directional and hrottle Valves Solenoid Operated KDG4V-3S and KG4V-3S standard performance series K()DG4V-3 and K()G4V-3 high performance series ISO 4401-03 (NF D03)

More information

Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US

Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle

More information

Check & Load Control Valves

Check & Load Control Valves Overview The HYDAC range of direct and pilot operated check valves provide a broad selection of cartridge and inline products with operating pressure rating of up to 6 psi (4 bar). All valves have a one

More information

2/2 and 3/2 Way Size 6 Seat Valves

2/2 and 3/2 Way Size 6 Seat Valves 2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE rueninghaus Hydromatik Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar RE 9008/03.97 RE 9008/03.97

More information

Series PAVC Variable Displacement Piston Pumps zp01. Catalog HY28-2662-CD/US

Series PAVC Variable Displacement Piston Pumps zp01. Catalog HY28-2662-CD/US Series PAVC Variable Displacement Piston Pumps zp1 Catalog HY28-2662-CD/US 1 Introduction Series PAVC Quick Reference Data Chart Pump Model Displacement CM 3 /REV (IN 3 /REV) Pump Delivery *Approx. Noise

More information

Pressure relief valve, type DB/DBW...50B/ (New Series) Huade América 1

Pressure relief valve, type DB/DBW...50B/ (New Series) Huade América 1 Pressure relief valve, type DB/DBW...50B/ (New Series) Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure relief valve, type DB/DBW...50B/ (New Series) Size 10 to 32 up to 35 MPa

More information

*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.

*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...

More information

DXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30

DXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30 85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08

More information

15/40/80CN Series Medium Pressure Filters

15/40/80CN Series Medium Pressure Filters 1/4/8CN Series Medium Pressure Filters Max 32 l/min - 7 bar Global Filtration Technology 1/4/8CN Series TYPICAL APPLICATIONS Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard)

More information

Service Data Vickers. Piston Pumps. PVH74/81 Variable Displacement Piston Pump - 11 Design. Revised 11/01/97

Service Data Vickers. Piston Pumps. PVH74/81 Variable Displacement Piston Pump - 11 Design. Revised 11/01/97 Service Data Vickers Piston Pumps PVH74/81 Variable Displacement Piston Pump - 11 Design Revised 11/01/97 Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque Limiter

More information

Solenoid Operated Directional Valves

Solenoid Operated Directional Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SF-2C-115A-35 S-1AY-12D-35 SD-2C-12D-35 Features High Flow/ High Pressure: Up to 40 gpm / 5000 psi working pressure*.

More information

Pump-Transfer Cooler Filtration Unit UKF

Pump-Transfer Cooler Filtration Unit UKF Pump-Transfer Cooler Filtration Unit UKF Symbol General The UKF unit is a compact, easy-to-install system for offline filtration cooling circuits. It consists of a low-noise feed pump, a filter and a plate

More information

Solenoid Operated Directional Valves

Solenoid Operated Directional Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working

More information