Fastener Identification Markings: ASTM, SAE, ISO

Size: px
Start display at page:

Download "Fastener Identification Markings: ASTM, SAE, ISO"

Transcription

1 ings:, SAE, ISO Yield SAE J429Grade 1 A307Grades A&B SAE J429Grade 2 Low or Low Carbon Low or 33, /4 Over 3/4 to 55,000 33,000 57,000 36,000 60,000 60,000 SAE J429Grade 4 Carbon Cold Drawn B5 AISI 501 B5 4 B6 B6 AISI ,000 B7 B7 AISI 4140, 4142, OR /2 Over 2-1/2 thru 4 75,000 B16 B16 CrMoVa Alloy Over 4 thru 7 AISI 304 AISI 347 1/4 and larger 30,000 75,000 AISI 316 for High- AISI 321 1/4 and larger 30,000 75,000 Jeff Dutkovic Sales 1 (800) jd@americanfastener.com Page 1

2 ings:, SAE, ISO Yield for High- AISI 304Strain AISI 347Strain AISI 316Strain 3/4 Over 3/4 thru 1 Over 1 thru 1-1/4 Over 1-65,000 50,000 65,000 50, ,000 90,000 AISI 321Strain 65,000 50,000 L7 L7 AISI 4140,4142 or 4145 L7A L7A AISI /2 L7B L7B AISI 4137 L7C L43 LC7 L43 Bolts,Screws, for Low- AISI 8740 AISI AISI 304 AISI 347 1/4 and larger 30,000 75,000 AISI 321 Jeff Dutkovic Sales 1 (800) jd@americanfastener.com Page 2

3 ings:, SAE, ISO Yield A320 Grade F A320 Grade F 3/4 Over 3/4 thru 1 Over 1 thru 1-1/4 Over 1-1/4 and larger 30,000 75,000 A320 Grade F A320 Grade A320 Grade A320 Grade F Bolts,Screws, for Low- AISI 304 AISI 347 AISI 303or 303Se 3/4 Over 3/4 thru 1 Over 1 thru 1-1/4 Over 1-65,00 50,00 65,00 50,00 A320 Grade AISI 316 A320 Grade AISI 321 Grade 5 A449, 1Over 1 to 1Over 1 to Over thru 3 55,000 58,000 90,000 Grade 5.1 Sems Low or, No. 6 thru 3/8 Grade 5.2 Low Carbon Martensitic 1 Jeff Dutkovic Sales 1 (800) jd@americanfastener.com Page 3

4 ings:, SAE, ISO Yield A325 A325 Type 1, 1/2 thru 11-1/8 thru A325 A325 Type 2 High Structural Bolts Low Carbon Martensitic 1/2 thru 1 A325 A325 Type 3 Atmospheric Corrosion Resisting 1/2 thru 11-1/8 thru A354 Grade BB A354 Grade BC Bolts, Alloy 2-1/22-3/4 thru 4 75,000 83,000 78, ,000 99,000 Grade 7 Bolts, Screws Carbon Alloy 4 133,000 Grade 8 A354 Grade BD Carbon Alloy 130, ,000 Alloy 4 Grade 8.1 or SAE 1041 Modifi ed Elevated Drawn 130, ,000 A490 A490 High Structural Bolts Alloy 1/2 thru 130, ,000 min 170,000 max Class 4.6, All Sizes thru 33,000 36,000 60,000 Jeff Dutkovic Sales 1 (800) jd@americanfastener.com Page 4

5 ings:, SAE, ISO Yield Class 5.8, 55,000 57, or Class 8.8 All Sizes thru 88 Alloy 10.9 or Class , , NOTES: 1. Specifi cations: A193 Alloy- Bolding s for High- A307 Low- Externally and Internally Threaded Standard s A320 Alloy- Bolding s for Low- A325 High- Bolds for Structural Joints, Including Suitable Nuts and Plain Washers A354 Alloy Bolts and with Suitable Nuts A449 Bolts and A490 Alloy Bolts for Structural Joints 2. SAE Specifi cation: J429 Mechanical and Quality Requirements for Externally Threaded s 3. ISO Recommendations: No. R898 of s Part 1 Bolts, Screws and 4. Grade 7 bolds and screws are roll threaded after heat treatment. Jeff Dutkovic Sales 1 (800) jd@americanfastener.com Page 5

6 ings:, SAE, ISO Grade ing Stress (ksi) Hardness Rockwell Min Max See Note No A563 Grade 0 A563 Grade A A563 - Grade B Over 1 thru 69 B55 90 B B69 C32 3, 4 A563 Grade C May Be B78 C38 5 A563 Grade C3 Atmospheric Corrosion Resistant May be B78 C38 5, 9 A563 Grade D Maybe C38 6 A563 Grade DH C24 C38 6 A563 Grade DH3 Atmospheric Corrosion Resistant May be C24 C38 5, 9 A194 Grade B A194 Grade , 8 A194 Grade 2H C24 C38 7 Jeff Dutkovic Sales 1 (800) jd@americanfastener.com Page 6

7 ings:, SAE, ISO Grade ing Stress (ksi) Hardness Rockwell Min Max See Note A194 Grade 2HM , 8 A194 Grade C24 C38 7 A194 Grade C24 C38 7 A194 Grade 7M NOTES: 1. In addition to the indicated grade marking, all grades, except A563 grades O, A and B, must be marked for manufacturer identification. 2. The markings shown for all grades of A194 nuts are for cold formed and hot forged nuts. When nuts are machined from bar stock the nut must be additionally marked with the letter B. 3. Nuts are not required to be marked unless specified by the purchaser. When marked, the identification marking shall be the grade letter O, A or B. 4. Properties shown are those of nonplated or noncoated coarse thread hex nuts. 5. Properties shown are those of coarse thread heavy hex nuts. 6. Properties shown are those of coarse thread heavy hex nuts. 7. Properties shown are those of coarse 8-pitch thread heavy hex nuts. 8. Hardnesses are Brinell Hardness Numbers. 9. The nut manufacturer, at his option, may add other markings to indicate the use of atmospheric corrosion resistant steel. 10. s: A563 Carbon and Alloy Nuts. A194/A194M Carbon and Alloy Nuts for Bolts for High Pressure and High. Jeff Dutkovic Sales 1 (800) jd@americanfastener.com Page 7

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev. Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical

More information

High tensile strength stainless fasteners

High tensile strength stainless fasteners High tensile strength stainless fasteners BUFAB STAINLESS HISTORY 1674 Svartå Bruk was founded 1912 Svartå Bruk was incorporated into the Hasselfors group. 1947 Production of Stainless Steel Fasteners

More information

Let s look at an example of where grade 5 and grade 8 bolts are subjected to single shear loads (winch plate reference).

Let s look at an example of where grade 5 and grade 8 bolts are subjected to single shear loads (winch plate reference). Bolt s I have been on a quite a few online email lists over the last 7 years or so, basically since they first came out. From the original Jeep-L list to the XJ-list to the Rockcrawler.com board, a common

More information

Manufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration

Manufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration Manufacturing, Supply & Quality Plan for Tower Bolts Project: SL Tower Bolt Market Penetration Document History Version Date Original Document First Submission Feb 9, 2013 Rev1 Requested Revisions Comments

More information

Metric System & Specifications

Metric System & Specifications Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial

More information

Hilti HIT-V and HAS Threaded Rod and Hilti HIT-Z Anchor Rod

Hilti HIT-V and HAS Threaded Rod and Hilti HIT-Z Anchor Rod , Monday, HAS March and HIT-Z 24, 2014 Hilti Rod Specifications and Technical Data Hilti and HAS Threaded Rod and Hilti HIT-Z Rod Specifications and Technical Data Hilti has provided threaded rod for many

More information

BUMAX. REYHER your partner for the BUMAX range

BUMAX. REYHER your partner for the BUMAX range BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX

More information

DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4

DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4 DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD

More information

Standard Specification for Stainless Steel Bars and Shapes 1

Standard Specification for Stainless Steel Bars and Shapes 1 Designation: A 276 06 Standard Specification for Stainless Steel Bars and Shapes 1 This standard is issued under the fixed designation A 276; the number immediately following the designation indicates

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon

More information

Stainless steel grade chart

Stainless steel grade chart Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0

More information

Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1

Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1 Designation: A 2/A 2M 04a e1 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1 This standard is issued

More information

Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:

Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts: Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen

More information

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.

More information

Caps STANDARD WEIGHT Inches / Pounds

Caps STANDARD WEIGHT Inches / Pounds Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe

More information

Specification for Rotary Drill Stem Elements

Specification for Rotary Drill Stem Elements Addendum 1 March 2007 Effective Date: September 1, 2007 Specification for Rotary Drill Stem Elements ANSI/API SPECIFICATION 7-1 FIRST EDITION, MARCH 2006 EFFECTIVE DATE: SEPTEMBER 2006 ISO 10424-1:2004

More information

North American Stainless

North American Stainless Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,

More information

North American Stainless

North American Stainless North American Stainless Long Products Stainless Steel Grade Sheet AISI 316 UNS S31600 EN 1.4401 AISI 316L UNS S31630 EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic

More information

Hilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com

Hilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,

More information

HOSE, TUBE, AND PIPE CLAMPS

HOSE, TUBE, AND PIPE CLAMPS hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions

More information

Fasteners and screw threads

Fasteners and screw threads ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws

More information

Connection Solutions

Connection Solutions Connection Solutions DESIGN BUILD SYSTEM Connection Solutions for Cold formed Steel Construction Complies with; AS/NZS 4600:2005 AISI S100:2007 AS/NZ 1397 ASTM A653 DESIGN & BUILD SYSTEM FRAMECAD Construction

More information

Valve Steel. Valve Steel

Valve Steel. Valve Steel Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique

More information

North American Stainless Long Products

North American Stainless Long Products North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development

More information

North American Stainless

North American Stainless North American Stainless Flat Product Stainless Steel Grade Sheet 316 (S31600)/EN 1.4401 316L (S31603)/ EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic stainless

More information

Technical Data BLUE SHEET. Martensitic. stainless steels. Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES APPLICATIONS PRODUCT FORM

Technical Data BLUE SHEET. Martensitic. stainless steels. Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES APPLICATIONS PRODUCT FORM Technical Data BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA Martensitic Stainless Steels Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES Allegheny Ludlum Types 410, 420, 425 Modified, and

More information

Section 4: NiResist Iron

Section 4: NiResist Iron Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar

More information

Screw Thread Design. Rev. 3-4-09

Screw Thread Design. Rev. 3-4-09 Screw Thread Design Screw Thread Fundamentals A screw thread is defined as a ridge of uniform section in the form of a helix on either the external or internal surface of a cylinder. Internal threads refer

More information

X15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE.

X15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE. TM A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS METALLURGICAL SPECIAL STEELS INNOVATION RESEARCH SERVICE DEVELOPMENT Enhancing your performance THE INDUSTRIAL ENVIRONMENT

More information

Guide rail bracket (for adjustable heads)

Guide rail bracket (for adjustable heads) (for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,

More information

Solenoid valves 2/2-way direct-operated Type EV210A

Solenoid valves 2/2-way direct-operated Type EV210A Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral

More information

Hose Clamps & Fittings

Hose Clamps & Fittings All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw

More information

Appendice Caratteristiche Dettagliate dei Materiali Utilizzati

Appendice Caratteristiche Dettagliate dei Materiali Utilizzati Appendice Caratteristiche Dettagliate dei Materiali Utilizzati A.1 Materiale AISI 9840 UNI 38NiCrMo4 AISI 9840 Steel, 650 C (1200 F) temper, 25 mm (1 in.) round Material Notes: Quenched, 540 C temper,

More information

FASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) IRISH STANDARD I.S. EN ISO 3269:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

FASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) IRISH STANDARD I.S. EN ISO 3269:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN ISO 3269:2000 ICS 21.060.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 FASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) NSAI

More information

Alternative Steel Materials to BS 5950

Alternative Steel Materials to BS 5950 BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation

More information

AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels

AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043

More information

SAND CAST CHILL CAST LM4 - TF

SAND CAST CHILL CAST LM4 - TF 1 This alloy conforms with British Standards 1490 and is similar to the obsolete specifications BS.L79 and D.T.D 424A. Castings may be in the cast (M) of fully heat treated (TF) conditions. CHEMICAL COMPOSITION

More information

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from

More information

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

SECTION III, DIVISIONS 1 AND 2

SECTION III, DIVISIONS 1 AND 2 SECTION III, DIVISIONS 1 AND 2 Subject Interpretation File No. Division 1, Appendix I, Fig. I-9.1, Design Fatigue Curve for Martensitic Stainless Steel... III-1-13-48 12-1021 Division 1, NB-2223.3, Coupons

More information

How To Write A Recipe Card

How To Write A Recipe Card Forging stock standards guideline Issue n 10 FORGING STOCK 30 Microstructure 34 Grain size Air melted (except if δ ferrite or problem 1 per batch) 50 Cleanness/ Inclusion See EN 2157-2. 51 Macrostructure

More information

ALLOY 2205 DATA SHEET

ALLOY 2205 DATA SHEET ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,

More information

Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049

Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049 Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal

More information

FASTENER TECHNICAL DATA AND CHARTS SECTION

FASTENER TECHNICAL DATA AND CHARTS SECTION FASENERS FASENER ECHNICAL DAA AND CHARS SECION IMPORAN DISCLAIMER All of the information provided in this section has been assembled with concern for accuracy. It is intended for advisory purposes only

More information

SITRANS F flowmeters SITRANS F M

SITRANS F flowmeters SITRANS F M Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update

More information

James M. Pleasants Company

James M. Pleasants Company James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:

More information

LEGACY REPORT ER-5110. www.icc-es.org. ICC Evaluation Service, Inc. Reissued November 1, 2003. Legacy report on the 1997 Uniform Building Code

LEGACY REPORT ER-5110. www.icc-es.org. ICC Evaluation Service, Inc. Reissued November 1, 2003. Legacy report on the 1997 Uniform Building Code LEGACY REPORT Reissued November 1, 2003 ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California 90601 # (562) 699-0543 Regional Office # 900

More information

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :- Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and

More information

ADDENDUM TO 2011 TAN SHEETS. Tempers For Aluminum And Aluminum Alloy Products Metric July 16, 2013. New and Revised Registrations

ADDENDUM TO 2011 TAN SHEETS. Tempers For Aluminum And Aluminum Alloy Products Metric July 16, 2013. New and Revised Registrations s For Aluminum And Aluminum s Metric July 1, 201 By Date Over Thru Basis 1 Ult. Yield 0 mm 201T11 Sumitomo 0/01/2012 Drawn Tube D or. A.00.00 2 1 20 * Tentative 201T11 Sumitomo 12/1/2011 Drawn Tube 22T1

More information

SPECIFICATIONS FOR STEEL PIPE

SPECIFICATIONS FOR STEEL PIPE SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical

More information

RING JOINT SYSTEMS 207

RING JOINT SYSTEMS 207 RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI

More information

ADDENDUM TO 2011 TAN SHEETS Tempers For Aluminum And Aluminum Alloy Products Metric Edition June, 2014. New and Revised Registrations

ADDENDUM TO 2011 TAN SHEETS Tempers For Aluminum And Aluminum Alloy Products Metric Edition June, 2014. New and Revised Registrations s For Aluminum And Aluminum s Metric Edition June, 201 By Date Over Thru Basis 1 Ult. Yield 201T11 Sumitomo 0/01/2012 Drawn Tube 0 D or. A.00.00 2 1 20 * Tentative 201T11 Sumitomo 12/1/2011 Drawn Tube.00.00

More information

Metal Pressfitting Pipe Systems

Metal Pressfitting Pipe Systems VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing

More information

Standard Specification for Tool Steels Alloy 1

Standard Specification for Tool Steels Alloy 1 Designation: A 68 8 Standard Specification for Tool Steels Alloy This standard is issued under the fixed designation A 68; the number immediately following the designation indicates the year of original

More information

Specifications for Programs: 737, 747, 757, 767, 777, 787

Specifications for Programs: 737, 747, 757, 767, 777, 787 = Performed by GKN BAC 5000 AN General Sealing 6-262, 6-265, 6-267, 6-270 PSD for 787 Only: 6-242, 6-269, 6-271 PSD for 777 Only: 6-261,6-264, 6-266, 6-269, 6-271 BAC 5004 L Installation of Permanent Fasteners

More information

σ y ( ε f, σ f ) ( ε f

σ y ( ε f, σ f ) ( ε f Typical stress-strain curves for mild steel and aluminum alloy from tensile tests L L( 1 + ε) A = --- A u u 0 1 E l mild steel fracture u ( ε f, f ) ( ε f, f ) ε 0 ε 0.2 = 0.002 aluminum alloy fracture

More information

EMP Part # Categor Description

EMP Part # Categor Description EMP Part # Categor y Description Qty Available as of 01/03/13 Cost/C 001014 SHC 1/4-20x1/2 J429 GR 5 Hex Hd Cap Screw Zinc Yellow 3,300 $1.41 001079 SHC 1/4-20x1 1/4 J429 GR 8 Hex Hd Cap Screw Black Oxide

More information

Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1

Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1 Designation: A 213/A 213M 03b Used in USDOE-NE standards Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1 This standard is issued

More information

List of approvals of SWG GmbH and GVG mbh

List of approvals of SWG GmbH and GVG mbh Qualitätsprüfung Produkte Technical Document QP-TQ-TD-01EN Titel: Title: List of approvals of SWG GmbH and GVG mbh Ersetzt: Dokument-Nr.: QP-TQ-TD-01EN Rev.: C vom: 26.01.2015 Replaces: Document-No.: (engl.version)

More information

MDrive Linear Actuators

MDrive Linear Actuators MDrive Linear Actuators All-in-one linear motion systems Delivering long life, high accuracy and unsurpassed repeatability, all in a package that is extremely compact and affordable. MDrive Linear Actuators

More information

RIGGING HARDWARE ASME B30.26. Addresses detachable lifting hardware for lifting purposes

RIGGING HARDWARE ASME B30.26. Addresses detachable lifting hardware for lifting purposes RIGGING HARDWARE ASME B30.26 Addresses detachable lifting hardware for lifting purposes Adjustable Hardware (Turnbuckles, Eye nuts, Swivel Hoist Rings and Eyebolts Compression Hardware (Wire Rope Clips

More information

NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE

NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE Pipe Products NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE http://www.nssmc.com/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_01_201211f

More information

BIS Metal Pipe Clamps with Lining

BIS Metal Pipe Clamps with Lining A BIS Metal Pipe Clamps with Lining BIS Clamps BISMAT Flash BISMAT 2000 Ø ¼ - 2" BISMAT 2000 Ø 2½ - 4" 2 3 4 BIS Industrial Clamps BIS Heavy Duty Clamps HD1501 (1/2") (BUP1000) 5 BIS Clamps for Plastic

More information

Chapter 17: Springs. Fundamentals of Machine Elements, 3 rd ed. Schmid, Hamrock and Jacobson. 2014 CRC Press

Chapter 17: Springs. Fundamentals of Machine Elements, 3 rd ed. Schmid, Hamrock and Jacobson. 2014 CRC Press Chapter 17: Springs It must be confessed that the inventors of the mechanical arts have been much more useful to men than the inventors of syllogisms. Voltaire A collection of helical compression springs.

More information

Standard Specification for Tool Steel High Speed 1

Standard Specification for Tool Steel High Speed 1 Designation: A 600 92a (Reapproved 2004) Standard Specification for Tool Steel High Speed This standard is issued under the fixed designation A 600; the number immediately following the designation indicates

More information

University of Portland School of Engineering LABORATORY OUTLINE: TENSILE TESTING OF STEEL & ALUMINUM ALLOYS (ASTM E8)

University of Portland School of Engineering LABORATORY OUTLINE: TENSILE TESTING OF STEEL & ALUMINUM ALLOYS (ASTM E8) TENSILE TESTING OF STEEL & ALUMINUM ALLOYS (ASTM E8) To carry out a standard tensile test on specimens of a hot rolled steel (AISI 1045), Type 2024- T351 aluminum, polymers (UHMW-PE, acrylic) and, from

More information

Bolting Galvanized Steel

Bolting Galvanized Steel Bolting Galvanized Steel This chapter gives information on the characteristics, advantages and economics of bolted galvanized structures and zinc coated fasteners, and offers comment on bolting procedures

More information

North American Stainless

North American Stainless North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 304 (S30400)/ EN 1.4301 304L (S30403) / EN 1.4307 304H (S30409) Introduction: Types 304, 304L and 304H are the most versatile and widely

More information

TBG-25 OPTIONS X AXIS TRAVEL (MM) Z AXIS TRAVEL (MM) OPTIONS FOR: SPECIFICATIONS. Specifications. Configuration. Belt Type 25.

TBG-25 OPTIONS X AXIS TRAVEL (MM) Z AXIS TRAVEL (MM) OPTIONS FOR: SPECIFICATIONS. Specifications. Configuration. Belt Type 25. LINEAR ROBOTICS > T-BOT GANTRY ROBOTS T-BOT GANTRY ROBOTS TBG-25 OPTIONS X AXIS TRAVEL (MM) 500 1000 2000 Custom Z AXIS TRAVEL (MM) 250 500 Custom Controls Motor Gearbox HOW TO BUILD YOUR TBG-25: Features

More information

STANDARDS FOR THE MATERIALS

STANDARDS FOR THE MATERIALS STANDARDILUETTELO 1(15) Kpl Standardin numero STANDARDS FOR THE MATERIALS 1 EN 10204 2004-10 Metallic products.types of inspection documents 2 EN 10079 1992-10 Definition of steel products 3 EN 10027-1

More information

Why Chicago Faucets Cartridges?

Why Chicago Faucets Cartridges? CO UNCIL Why Chicago Faucets Cartridges? ING U.S. G EN BU I LD M RE E M B E R We are a member of the U.S. Green Building Council and support the Leadership in Energy and Environmental Design (LEED) Green

More information

API Upstream Standard Development Update - Supply Chain Management. Rick Faircloth

API Upstream Standard Development Update - Supply Chain Management. Rick Faircloth API Upstream Standard Development Update - Supply Chain Management Rick Faircloth o Overview of API 20 Series Supply Chain Management Overview of API 20 Series Supply Chain API formed in 1919 as a national

More information

Vrtné trubky Drill Pipe

Vrtné trubky Drill Pipe Vrtné trubky Drill Pipe VRTNÉ ROURY - zušlechtěné závity - vysoká kvalita těla roury - svařeno třením - vysoká přímost vrtných tyčí - závity dle STN, API, DIN a GOST - délky dle přání zákazníka Průměr

More information

North American Stainless

North American Stainless North American Stainless Long Products Stainless Steel Grade Sheet AISI 304 UNS S30400 EN 1.4301 AISI 304L UNS S30430 EN 1.4307 INTRODUCTION: Types 304 and 304L are the most versatile and widely used of

More information

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY

More information

Material data sheet. EOS CobaltChrome MP1. Description

Material data sheet. EOS CobaltChrome MP1. Description EOS CobaltChrome MP1 EOS CobaltChrome MP1 is a cobalt-chrome-molybdenum-based superalloy powder which has been optimized especially for processing on EOSINT M systems. This document provides information

More information

AN EXPLANATION OF JOINT DIAGRAMS

AN EXPLANATION OF JOINT DIAGRAMS AN EXPLANATION OF JOINT DIAGRAMS When bolted joints are subjected to external tensile loads, what forces and elastic deformation really exist? The majority of engineers in both the fastener manufacturing

More information

Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za

Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore

More information

8. Spring design. Introduction. Helical Compression springs. Fig 8.1 Common Types of Springs. Fig 8.1 Common Types of Springs

8. Spring design. Introduction. Helical Compression springs. Fig 8.1 Common Types of Springs. Fig 8.1 Common Types of Springs Objectives 8. Spring design Identify, describe, and understand principles of several types of springs including helical copression springs, helical extension springs,, torsion tubes, and leaf spring systes.

More information

FLANGED END BALL VALVE

FLANGED END BALL VALVE Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material

More information

HEAT TREATMENT OF STEEL

HEAT TREATMENT OF STEEL HEAT TREATMENT OF STEEL Heat Treatment of Steel Most heat treating operations begin with heating the alloy into the austenitic phase field to dissolve the carbide in the iron. Steel heat treating practice

More information

AISI O1 Cold work tool steel

AISI O1 Cold work tool steel T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their

More information

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING

More information

Ductile Iron Pipe Couplings

Ductile Iron Pipe Couplings J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your

More information

Volkswagen B3 Passat General-Engine 4 CYL. 19 Engine - Cooling System (Page GR-19)

Volkswagen B3 Passat General-Engine 4 CYL. 19 Engine - Cooling System (Page GR-19) 19 Engine - Cooling System (Page GR-19) Cooling system draining and filling general information Body components, layout Engine components, layout Radiator fan run-on checking Recommended mixture ratios

More information

PVM Piston Pumps Service Manual

PVM Piston Pumps Service Manual PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...

More information

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved

More information

KF Needle & Gauge Valves

KF Needle & Gauge Valves KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low

More information

GENERAL PROPERTIES //////////////////////////////////////////////////////

GENERAL PROPERTIES ////////////////////////////////////////////////////// ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,

More information

Working Load Limit (lbs.) Wt./Ea. (lbs.) Working Load Limit (lbs.) Wt./Ea. (lbs.) Working Load Limit (lbs.)

Working Load Limit (lbs.) Wt./Ea. (lbs.) Working Load Limit (lbs.) Wt./Ea. (lbs.) Working Load Limit (lbs.) STAINLESS STEEL Swivels Eye & Eye Swivels T316 Size Overall Length Limit SWVLEESS1/4 1/4 2.60 660.13 SWVLEESS5/16 5/16 3.54 1,045.24 SWVLEESS3/8 3/8 4.53 1,925.42 SWVLEESS1/2 1/2 5.75 2,750 1.28 SWVLEESS5/8

More information

CR25 Cable Roller Guide

CR25 Cable Roller Guide INSTRUCTION MANUAL CR25 Cable Roller Guide Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 52022071 2005 Greenlee Textron Inc.

More information

ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES. 5. Clean properly with appropriate products the part of the tube to be flared.

ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES. 5. Clean properly with appropriate products the part of the tube to be flared. ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES 1. Before to start to flare the tube check for the correct parameters of all the tools to be used and substitute 2. Cut the tube at a 90 angle

More information

Version. BBI products and services offered exclusively through distribution

Version. BBI products and services offered exclusively through distribution 2013 Version BBI products and services offered exclusively through distribution Terms and Conditions of Sale GUARANTEE: All Brighton-Best International, Inc. products are manufactured to rigid quality

More information