Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive.

Transcription

1 Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Floor Covering Trims Carpet Metal Trims / Tile Trims / Vinyl Trims COVENTRY GOLD HAMMERED BRIGHT DIPPED BRASS HAMMERED MILL FINISH HAMMERED NICKEL HAMMERED BRONZE HAMMERED BRASS OAK CHERRY GUNSTOCK ITEMS NEW LVT PROFILES NEW WOOD FINISHES Futura Industries / / / ISO 900 Registered / march 20 NEW

2 RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. Futura Has A Better Way To Cap Off Great Products Futura Floor Covering Trims Save You Time Introducing the newest innovation to make opening tubes safe and easy - reusable tube caps. No more hammers and hacksaws required to access the trims inside of the tube. This simple, easy to use cap can be opened by simply squeezing one of the tabs and popping the cap out of the tube. Once opened, you can recap it by sliding the notches back into the notch access holes on the tube. The tube caps are color coded so you can easily identify what flooring trims are inside the tube (Gold caps represent gold and coventry gold material, Silver caps represent silver and nickel material). Futura Floor Covering Trims Eliminate Hassles The new patent pending end cap, coupled with Futura s industry leading 48 hour shipping guarantee and superior product features make Futura Flooring Trims the choice of the top distributors in the Floor Covering Industry. To find out how you can benefit from the Futura advantage, call us today. Futura Floor Covering Trim Product Features: Sharper Teeth The fabricated teeth on the Clampdown trims provide a stronger, long lasting grip for carpets. Clean, Countersunk Nail Holes All Binder Bars, Carpet Bars, Stair Nosings and Seam Binders incorporate a countersunk hole for a nail to be hammered into. The countersunk design allows the nail head to sit flush with the top of the trims and eliminates snagging. Fully Fabricated Flooring Trims Once all Futura trims have been fabricated (hammered, anodized, painted or buffed) they are trimmed down. This means that we take the time to eliminate any unusable part of the material that should not be used in an installation. Thus, saving time for the installer and ensuring that the customer gets the best Floor Covering Trim available. PO Box 600 Bldg H- Freeport Center Clearfield, UT toll free toll free fax

3 Table of Contents CATALOG INFORMATION Product Information... New Items...4 Futura Tile Trims... CLAMPDOWNS, JOINERS & VINYL INSERT TRIMS ½" Standard Pin Clampdown (CM 04, CM 70, CM 70 FLEX) /6" Standard Pin Clampdown (CM 9, CM 2-24, CM 2-27) /6" Standard Pin Clampdown (CM 2-24 FLEX, CM 2-27 FLEX)...6 ½" Premium Pin Clampdown (CM 02, CM 06 FLEX) /6" Premium Pin Clampdown (CM 0, CM 0 FLEX, CM 70, CM 70 FLEX)..7 /8" Premium Pin Clampdown (CM 00, CM 09 FLEX)...7 /6" Premium Pin Clampdown (CM 704)...7 ¾" Premium Pin Clampdown (CM 99A, CM 07A FLEX)...7 ¾" Deluxe Pin Clampdown (CM 99, CM 07 FLEX, CM 64, CM 64 FLEX)...8 " Commercial Pin Clampdown (CM 0)...8 ½" Premium Pinless Clampdown (CM 20, CM 20 FLEX) /6" Deluxe Pinless Clampdown (CM 2, CM 2 FLEX)...9 /6" Blank Clampdown for Tack Strips (CM 2)...9 Carpet Tile Joiner (CM 08)...9 ½" Joiner with Pins (CM 08)...9 /2" Pinless Joiner (CM 208) /6" Joiner with Pins (CM 2)...0 ½" Pinless Joiner (CM 22)...0 /8" Vinyl Insert Carpet Metal with Pins (CM 0, CM 0 FLEX)...0 /8" Vinyl Insert Carpet Metal with Pins / Extender (CM )...0 /8" Vinyl Insert Carpet Metal with Pins (Canadian) (CM 0, CM 0 FLEX). 0 ¼" Vinyl Insert Pinless Carpet Metal (CM 20, CM 20 FLEX)... ¼" Vinyl Insert Pinless / Extender (CM 2)... ¼" Vinyl Insert Pinless Trim (Canadian) (CM 40, CM 40 FLEX)... 9 /6" Vinyl Insert Carpet Metal with Pins (CM 70)... Z-BAR, BINDER BARS & CARPET BAR Z-Bar... " Standard Binder Bar (CM )...2 " Deluxe Binder Bar (CM 0)...2 ½" Standard Binder Bar (CM 2)...2 ½" Premium Binder Bar (CM 02)...2 2" Deluxe Binder Bar (CM 04) ½" Deluxe Binder Bar (CM, CM 0)... ¾" Binder Bar - Overlap Edging (CM 70)... ¾" Seam Binder (CM 702) ¼" Seam Binder (CM 70)... 2 ½" Seam Binder (CM 704)... STAIR NOSINGS, STRAIGHT EDGES & SEAM BINDERS /6" Standard Stair Nosing (CM 6)...4 /6" Deluxe Stair Nosing (CM 60)...4 /6" Scribe-To Stair Nosing (CM 602)...4 /8" Standard Wide Tread Stair Nosing (CM 6)...4 /8" Deluxe Stair Nosing (CM 60)... /2" (4mm) LVT Stair Nosing (CM 606)... /6" (mm) LVT Stair Nosing (CM 608)... /6" (mm) LVT Stair Nosing (CM 60)... 7 /8" Deluxe Stair Nosing (CM 627)... 2" Standard Wide Tread Stair Nosing (CM 67)...6 2" Deluxe Stair Nosing (CM 607, CM 648, CM 67) ½" Commercial Stair Nosing (CM 60)...6 ¼" Commercial Stair Nosing (CM 609) ½" Straight Edges (CM 6, CM 7)...7 COVING CAPS, TEE MOULDING & UNDERLAYMENT EDGING /2" Coving Cap (CM 90)...8 /8" Coving Cap (CM 90)...8 /2" (4mm) Square Cap (CM 904)...8 /6" (mm) Square Cap (CM 90)...8 /8" (mm) Bevel Cap (CM 406)...9 /2" (4mm) Bevel Cap (CM 404)...9 /6" (mm) Bevel Cap (CM 40)...9 ¼" Coving Cap (CM 40) ¼" Round Coving Cap (CM 400)...9 Tee Mouldings...20 Carpet Metal Screw Nails...20 TILE TRIMS ¼" Tile Trim (TT 4)...2 /6" Tile Trim (TT 6)...2 /8" Tile Trim (TT 8)...2 ½" Tile Trim (TT 2)...2 /8" Tile Trim (TT 8)...2 TILE REDUCERS /6" Tile Reducer (TR 6)...22 /8" Tile Reducer (TR 8, TR 8S)...22 ½" Tile Reducer (TR 2)...22 CARPET TUCKS /6" Carpet Tuck (CT 6)...22 /8" Carpet Tuck (CT 8)...2 TILE CAPS /6" Tile Cap (TC 6)...2 /8" Tile Cap (TC 8)...2 TILE STAIR NOSINGS /6" Tile Stair Nosing (TS 6)...2 /8" Tile Stair Nosing (TS 8)...2 /8" Tile Stair Nosing (SE 8)...24 ½" Tile Stair Nosing (SE 2)...24 TILE QUARTER ROUND /6" Tile Quarter Round (TQ 6)...24 /8" Tile Quarter Round (TQ 8)...24 ½" Tile Quarter Round (TQ 2)...24 VINYL TRIMS ¼" Cove Stick (VT 0)...2 ½" Cove Stick (VT 02)...2 Carpet Reducer For Glue Down Carpet (VT 20)...2 Carpet Reducer For Glue Down (VT, VT 2, VT )...2, 26 Tile Reducer For Resilient Floors (VT 24, VT 2)...26 Over The Top Resilient Reducer (VT 26)...26 Tile And Carpet Joiner (VT 74, VT 76)...26, 27 Stair Nosings (VT 640, VT 64, VT 642, VT 644)...27 Snap-In Dividers And Edges (VT 70, VT 706, VT 704, VT 70)...28 Carpet Coving Caps (VT 40, VT 46)...28, 29 Single Flange Track (VT 2)

4 Table of Contents WALLBOARD & TRIM MOULDINGS /8" Cove (TM 87)...0 /2" Cove (TM 8)...0 /6" Cove (TM 90)...0 /6" Cove (TM 9)...0 /6" Cove (TM 92)...0 /6" Cove (TM 98)... /6" Cove (TM 72)... /6" Cove (78 BBDA)... /2" Cap (724 BA)... /6" Outside Corner (TM 9)... /6" Division (TM 94)...2 /2" Division (WB 0)...2 /4" Division (WB 0)...2 /6" Cap (TM 80)...2 /6" Flat Back Cap (TM 8)...2 /6" Deep Slot Cap (TM 84)... /2" Wide Face Cap (TM 82)... /2" Cap (TM 8)... /8" Cap (WB 04)... 2 /2" Offset Drill Cove (TM 2)... 2

5 Product Information ORDERING INFORMATION For customer convenience, Futura finishes are coded to reflect the normal process applied to the individual product which appears as a suffix to the stock number of numerous items. A general description of these finishes appears below. ORDERING Finishes and/or lengths other than those shown as stock are available on special order. Please consult your local Futura Industries Distributor for additional information. FINISH CODES BA BB* BDB* BRZ CVG EA EB* EBLK EN* HB* HBRZ HBDB* HEA HMF HN* MF MFA MFB* ORB Buffed and Anodized Bright Brass Bright Dip Brass Bronze Coventry Gold Etched Aluminum Etched Brass Etched Black Etched Nickel Hammered Brass Hammered Bronze Hammered Bright Dip Brass Hammered Etched Anodized Hammered Mill Finish Hammered Nickel Mill Finish Mill Finish Anodized Mill Finished Brass Oil Rubbed Bronze * Brass and Nickel finishes are not recommended for outside use. Illustrations do not represent actual size, only important dimensions are shown. 48 HOUR GUARANTEE Items that have the 48 Hour Guarantee icon next to it are guaranteed to ship in 48 hours or less. If we don t ship the item within 48 hours, it s free! *48-Hour Guarantee does not apply if ordering more than your average number of pieces within the last 6-month period.

6 NEW Items NEW LVT Trims /8 (mm) 7/6 CM 406 /8" (mm) Bevel Cap Finish: EA, EN, BRZ See page 9 /4 -/2 CM 2 /2" Binder Bar Finish: Oak, Cherry, Gunstock See page 2 /2 (4mm) 7/6 CM 404 /2" (4mm) Bevel Cap Finish: EA, EN, BRZ See page 9 -/8 /2 (4mm) -7/6 CM 606 /2" (4mm) LVT Stair Nosing Finish: EA, EN, BRZ See page /6 (mm) /2 7/6 9/2 (4mm) 7/8 CM 40 /6" (mm) Bevel Cap Finish: EA, EN, BRZ See page 9 CM 904 /2" (4mm) Square Cap Finish: EA, EN, BRZ See page 8 -/8 /6 (mm) -7/6 CM 608 /6" (mm) LVT Stair Nosing Finish: EA, EB, EN, BRZ See page 9/2 /6 (mm) 7/8 CM 90 /6" (mm) Square Cap Finish: EA, EN, BRZ See page 8 /6 (mm) -7/6 CM 60 /6" (mm) LVT Stair Nosing Finish: EA, EB, EN, BRZ See page 2 NEW Vinyl Snap-in & Edge 2 " /6 " VT 706 2" Snap-in Divider Finish: BLK, BRN, GRY, BEIGE See page 28 NEW Bronze Finish Available CM 04 /2" Pin Clampdown (See page 6) CM 608 /6" (mm) LVT Stair Nosing (See page ) CM 99A /4" Pin Clampdown (See page 7) CM 60 /6" (mm) LVT Stair Nosing (See page ) CM 406 /8" (mm) Bevel Cap (See page 9) CM 20 /2" Pinless Clampdown (See page 8) CM 404 /2" (4mm) Bevel Cap (See page 9) CM " Binder Bar (See page 2) CM 40 /6" (mm) Bevel Cap (See page 9) CM 2 /2" Binder Bar (See page 2) CM 904 /2" (4mm) Square Cap (See page 8) CM 6 /6" Stair Nosing (See page 4) CM 90 /6" (mm) Square Cap (See page 8) CM 606 /2 (4mm) LVT Stair Nosing (See page ) 4

7 Futura Tile Trims Futura Tile Trim Profiles Protecting your flooring has never been so beautiful. Futura designer Tile Trim Profiles offer durable protection from everyday living. Each profile provides a handsome barrier against tile chipping, cracking and breaking as well as premature grout-wear. And, with a wide selection, Futura Tile Trim Profiles will enhance any décor. Beautify and protect your investment with Futura Tile Trim Profiles. TILE TRIMS Protect and beautify the edges of tiled surfaces with Tile Trim. Tile Trims are an ideal solution for tileto-carpet, tile-to-laminate and tile-to-hardwood surfaces. TILE REDUCER Transitioning from tile down to a lower surface is easy with a Tile Reducer. It s sloped design creates a seamless transition ideal for tile-to-carpet, tile-to-laminate and tile-to-hardwood surfaces. CARPET TUCK Carpet or lower surfaces are literally tucked under the Carpet Tuck trim, eliminating carpet peal and deterioration while complementing and protecting the adjacent tile. Available in a variety of finishes and sizes, Carpet Tuck is also a complement to your home décor and design. TILE CAP Tile Cap is the perfect answer to finishing outside wall tile corners. Its profile is designed to smoothly fill the corner, joining the ends of the tile. Tile Cap is a durable and protective transition adding distinctive style to your tile. It is also ideal for backsplashes, countertops, shelving and floor transitions. TILE STAIRNOSE Tiled stair edges take a serious beating. Protect your tile or stone and minimize damage by utilizing a Tile Stairnose in your design. It finishes the edge of the surface and then drops down creating an effective protection zone against chipping and cracking. TILE INSERT The Tile Insert allows you to implement vinyl transitions into your flooring design. If you have uneven transition heights, a channel extender simply snaps into the Tile Insert track. The Tile Insert is an applied after application and is designed to be used with glue down carpet.

8 Carpet Metal Trims /2" Standard PIN CLAMPDOWN /2 -/ CM 04 HMF 2' 40 PC 4026 CM 04 HEA 2' 40 pc 407 CM 04 HN 2' 24 2 PC 9062 CM 04 HBRZ NEW 2' 24 2 PC 4028 CM 04 HB 2' 40 PC Punched for nails on 6" centers - DIE 494 /2" Standard PIN CLAMPDOWN /2 -/8 068 CM 70 HMF 2' 40 4 PC 06 CM 70 HEA 2' 40 4 pc 064 CM 70 HN 2' 24 pc 0646 CM 70 HB 2' 40 4 PC 074 CM 70 HMF FLEX 2' 2 7 pc 4062 CM 70 HN FLEX 2' 2 7 pc 072 CM 70 HB FLEX 2' 2 7 pc Punched for nails on 6" centers - DIE 92 9/6" Standard PIN CLAMPDOWN 9/ CM 9 HMF 2' 40 9 PC 4006 CM 9 HB 2' 40 9 PC Punched for nails on 6" centers - DIE 628 -/2 9/6" Standard PIN CLAMPDOWN 9/6-7/ CM 2-24 HMF 2' PC 0227 CM 2-24 HMF-CTN 2' pc 4048 CM 2-27 HB 2' PC 0222 CM 2-27 HB-CTN 2' PC 4049 CM 2-24 HMF FLEX 2' 2 4 pc 40 CM 2-27 HB FLEX 2' 2 4 pc Punched for nails on 6" centers - DIE 962 /2" Premium PIN CLAMPDOWN /2 -/ CM 02 HMF 2' 40 6 PC 0700 CM 02 HN 2' PC 4009 CM 02 HB 2' 40 6 PC 404 CM 06 HMF FLEX 2' 2 2 PC 4068 CM 06 HN FLEX 2' 2 2 PC 4046 CM 06 HB FLEX 2' 2 2 PC Punched for nails on 6" centers - DIE 27 6 *Illustrations do not represent actual size.

9 Carpet Metal Trims 9/6" Premium PIN CLAMPDOWN 9/6 -/2 400 CM 0 HMF 2' 40 7 PC 404 CM 0 HN 2' 24 0 PC 4006 CM 0 HB 2' 40 7 PC 402 CM 0 HMF FLEX 2' 2 2 pc 40 CM 0 HB FLEX 2' 2 2 pc Punched for nails on 6" centers - DIE 270 C A R P E T M E T A L T R I M S 9/6" Premium PIN CLAMPDOWN 9/ CM 70 HMF 2' PC 0202 CM 70 HB 2' PC 0207 CM 70 HMF FLEX 2' 2 9 pc -/8 Punched for nails on 6" centers - DIE 927 /8" Premium PIN CLAMPDOWN / CM 00 HMF 2' PC CM 00 HB 2' PC CM 09 HMF FLEX 2' 2 2 pc 4008 CM 09 HB FLEX 2' 2 2 pc -7/6 Punched for nails on 6" centers - DIE 244 /6" Premium PIN CLAMPDOWN /6-9/6 004 CM 704 HMF 2' PC 062 CM 704 HN 2' PC 06 CM 704 HB 2' PC 079 CM 704 HBDB 2' PC Punched for nails on 6" centers - DIE 928 /4" Premium PIN CLAMPDOWN /4 -/ CM 99A HMF 2' PC CM 99A HN 2' pc 9066 CM 99A HBRZ NEW 2' PC 4007 CM 99A HB 2' PC CM 99A HBDB 2' pc CM 99A CVG 2' pc 4007 CM 99A OAK NEW 2' pc 406 CM 99A CHERRY NEW 2' PC 407 CM 99A GUNSTOCK NEW 2' PC 4002 CM 07A HMF FLEX 2' 2 2 pc 4007 CM 07A HN FLEX 2' 2 2 pc 400 CM 07A HB FLEX 2' 2 2 pc 7

10 Carpet Metal Trims /4" Deluxe Pin Clampdown /4 -/ CM 99 HMF 2' PC 4007 CM 99 HB 2' PC 4009 CM 99 HBDB 2' 2 28 pc CM 07 HMF FLEX 2' 2 28 pc CM 07 HB FLEX 2' 2 28 pc CM 07 HBDB FLEX 2' 2 28 pc Punched for nails on 6" centers - DIE 249 /4" Deluxe Pin Clampdown /4 -/8 " Commercial PIN CLAMPDOWN -/ CM 64 HMF 2' PC CM 64 HMF NEW 2' PC CM 64 HN 2' PC CM 64 HB 2' PC CM 64 HB NEW 2' PC CM 64 HBDB 2' pc CM 64 HBDB NEW 2' PC CM 64 HMF FLEX 2' 2 2 pc CM 64 HN FLEX 2' 2 2 pc Punched for nails on 6" centers -DIE CM 0 HMF 2' 2 9 pc 409 CM 0 HB 2' 2 9 pc Punched for nails on 6 centers - DIE 29 2-/8 /2" Premium PINless CLAMPDOWN /2 -/ CM 20 HMF 2' 40 2 PC CM 20 HEA 2' 40 2 pc 402 CM 20 HN 2' 24 6 PC 9067 CM 20 HBRZ NEW PC CM 20 HB 2' 40 2 PC 402 CM 20 HB NEW 2' 24 6 PC 4026 CM 20 HBDB NEW 2' 24 6 PC 4020 CM 20 CVG 2' 24 6 pc 402 CM 20 HMF FLEX 2' 2 8 pc 4004 CM 20 HEA FLEX 2' 2 6 pc CM 20 HN FLEX 2' 2 8 pc 4026 CM 20 HB FLEX 2' 2 8 pc 8 *Illustrations do not represent actual size.

11 Carpet Metal Trims 9/6" Deluxe PINless CLAMPDOWN 9/6 -/ CM 2 HMF 2' 40 7 pc 402 CM 2 HMF 2' 2 24 pc 402 CM 2 HB 2' 40 7 pc 402 CM 2 HB 2' 2 24 pc 4022 CM 2 HBDB 2' 2 24 pc CM 2 HMF FLEX 2' 2 24 pc No fabrication, nail starter lines - DIE 29 C A R P E T M E T A L T R I M S /6" Blank CLAMPDOWN for Tack Strips / CM 2 HMF 2' 40 6 PC 4024 CM 2 HN 2' 24 4 pc 402 CM 2 HB 2' 40 6 PC -7/6 No fabrication - DIE 494 Carpet Tile Joiner /8 407 CM 08 MFA 2' 2 24 pc CM 08 EN 2' 2 24 pc 408 CM 08 MFB 2' 2 24 pc No fabrication - DIE 672 -/4 /2" Joiner with Pins /4 7/6 -/2 400 CM 08 HMF 2' 2 2 pc 404 CM 08 HEA 2' 2 2 pc 4069 CM 08 HN 2' 2 2 pc 40 CM 08 HB 2' 2 2 pc Punched for nails on 6 centers - DIE 2940 /2" Pinless Joiner /4 /8 -/2 402 CM 208 HMF 2' 2 2 pc 4027 CM 208 HEA 2' 2 2 pc 4070 CM 208 HN 2' 2 2 pc 4026 CM 208 HB 2' 2 2 pc No fabrication -DIE

12 Carpet Metal Trims 9/6" Joiner with Pins /4 7/6-9/6 408 CM 2 HMF 2' 2 28 pc 4064 CM 2 HEA 2' 2 28 pc 4086 CM 2 HN 2' 2 28 pc 4084 CM 2 HB 2' 2 28 pc Punched for nails on 6 centers - DIE 96 /2" Pinless Joiner 7/6 /4 -/ CM 22 HMF 2' 2 24 pc 406 CM 22 HEA 2' 2 24 pc 4089 CM 22 HN 2' 2 24 pc No fabrication -DIE 962 /8" Vinyl Insert Carpet Metal with Pins /6 /2 409 CM 0 MF 2' 40 6 PC 406 CM 0 MF 2' 20 PC 4060 CM 0 MF FLEX 2' 2 9 PC -/8 Punched for nails on 6" centers - DIE 4674 /8" Vinyl Insert Carpet Metal with Pins / Extender /2 49 CM MF 2' 2 22 pc /8 Punched for nails on 6" centers - DIE 96 -/8 /8" Vinyl Insert Carpet Metal with Pins /6 /2 -/ CM 0 MF 2' 40 6 PC 4029 CM 0 MF FLEX 2' 2 9 pc Canadian Vinyl Insert Metal. Punched for nails, 6" centers - DIE 68 0 *Illustrations do not represent actual size.

13 Carpet Metal Trims /4" Vinyl Insert PInless Carpet Metal /6 /2 -/4 408 CM 20 MF 2' 40 PC 4066 CM 20 MF 2' PC 407 CM 20 MF FLEX 2' 2 6 PC No fabrication - DIE 467 C A R P E T M E T A L T R I M S /4" VinYL Insert Pinless / Extender /8 /2 460 CM 2 MF 2' 2 20 pc DIE 964 -/4 /4" VinYL Insert Pinless Carpet Metal /6 /2 -/ CM 40 MF 2' 40 PC 4026 CM 40 MF FLEX 2' 2 6 pc Canadian Vinyl Insert Metal. No fabrication - DIE 682 CANADIAN 9/6" Vinyl Insert Carpet Metal with Pins /2 022 CM 70 MF 2' 20 4 PC /8 Punched for nails on 6" centers - DIE 929-9/6 Z-Bar 4040 CM 0 MF Z-BAR 4' 2 PC

14 Carpet Metal Trims " Standard Binder Bar /4 " Deluxe Binder Bar /4 /2" Standard Binder Bar 4070 CM HMF 2' 40 PC 408 CM HMF W/FAST 2' 40 PC 4029 CM HMF W/FAST 2' 2 PC CM HMF W/FAST NEW 2' PC 4069 CM HEA 2' 40 pc 4022 CM HN W/FAST 2' PC CM HN W/FAST 2 2 pc 906 CM HBRZ W/FAST NEW PC 407 CM HB 2' 40 PC 4080 CM HB W/FAST 2' 40 PC 402 CM HB W/FAST 2' 2 PC 4029 CM HB W/FAST NEW 2' PC 404 CM HBDB W/FAST 2 40 pc 4022 CM HBDB W/FAST 2' 2 pc 4022 CM HBDB W/FAST NEW 2' PC 9047 CM CVG W/FAST 2' pc Drilled and countersunk, 6" centers for # fastener - DIE CM 0 HMF 2' PC 070 CM 0 HN W/FAST 2' PC 4022 CM 0 HB 2' PC Drilled and countersunk, 6" centers for # fastener - DIE 26 /4 -/ CM 2 HMF 2' 40 6 PC 9042 CM 2 HMF W/FAST 2' 40 6 PC 9046 CM 2 HMF W/FAST NEW 2' 24 4 PC 409 CM 2 HEA 2' 40 6 pc CM 2 HN W/FAST 2' 24 4 PC 906 CM 2 HBRZ W/FAST NEW 2' 24 4 PC 406 CM 2 HB 2' 40 6 PC 904 CM 2 HB W/FAST 2' 40 6 PC 904 CM 2 HB W/FAST NEW 2' 24 4 PC 904 CM 2 HBDB W/FAST 2' 40 6 PC CM 2 HBDB W/FAST NEW 2' 24 4 PC 9046 CM 2 CVG W/FAST 2' 24 4 PC 4027 CM 2 OAK W/FAST NEW 2' 24 4 PC 4028 CM 2 CHERRY W/FAST NEW 2' 24 4 PC 4029 CM 2 GUNSTOCK W/FAST NEW 2' 24 4 PC Drilled and countersunk, 6" centers for # fastener - DIE 247 /2" Premium Binder Bar /4 2" Deluxe Binder Bar -/2 40 CM 02 HMF 2' PC 407 CM 02 HMF W/FAST 2' pc 0702 CM 02 HN W/FAST 2' 24 7 PC 402 CM 02 HB 2' PC 406 CM 02 HB W/FAST 2' pc 408 CM 02 HBDB W/FAST 2' pc Drilled and countersunk, 6" centers for # fastener - DIE 28 / CM 04 HMF 2' 2 4 PC 4082 CM 04 HMF W/FAST 2' 2 4 PC 4002 CM 04 HEA 2' 2 4 pc 402 CM 04 HN W/FAST 2' 2 4 pc 404 CM 04 HB 2' 2 4 PC 408 CM 04 HB W/FAST 2' 2 4 PC 4042 CM 04 HBDB W/FAST 2' 2 4 pc Drilled and countersunk, 6" centers for # fastener - DIE 2 *Illustrations do not represent actual size.

15 9/2 Carpet Metal Trims 2 /2" Deluxe Binder Bar 2-/2 400 CM HMF W/FAST 2' 2 pc 4006 CM HB W/FAST 2' 2 pc Drilled and countersunk, 6" centers for # fastener - DIE 9902 C A R P E T M E T A L T R I M S 2 /2" Deluxe Binder Bar 9/64 2-/2 902 CM 0 HMF 2' 2 9 pc 9022 CM 0 HB 2' 2 9 pc Drilled and countersunk, 6" centers for #8 fastener - DIE 22 /4" Binder Bar-Overlapping Edging /4 / CM 70 HMF 2' 40 pc 4020 CM 70 HMF W/FAST 2' 40 pc 4026 CM 70 HMF W/FAST 2' 2 2 pc 406 CM 70 HEA 2' 2 2 pc CM 70 HB 2' 40 pc CM 70 HB W/FAST 2' 40 pc 40 CM 70 HB W/FAST 2' 2 2 pc Drilled and countersunk, 6" centers for # fastener - DIE 086 /4" Seam Binder /4 407 CM 702 HMF 2' 40 9 pc 4020 CM 702 HMF W/FAST 2' 40 9 pc 4072 CM 702 HEA 2' 40 9 pc 4079 CM 702 HN W/FAST 2' 24 2 pc CM 702 HB 2' 40 9 pc CM 702 HB W/FAST 2' 40 9 pc Drilled and countersunk, 6 centers for # fastener - DIE 0 /4" Seam Binder -/4 407 CM 70 HMF 2' 40 6 pc 4020 CM 70 HMF W/FAST 2' 40 6 pc 400 CM 70 HEA 2' 40 6 pc 4076 CM 70 HN W/FAST 2' 24 8 pc CM 70 HB 2' 40 6 pc CM 70 HB W/FAST 2' 40 6 pc Drilled and countersunk, 6 centers for # fastener - DIE 0 2 /2" Seam Binder 2-/ CM 704 MFA 2' 2 60 pc 008 CM 704 HMF 2' 2 60 pc 0042 CM 704 HB 2' 2 60 pc Drilled and countersunk, offset holes for #8 fastener - DIE 487

16 Carpet Metal Trims /6" Standard Stair Nosing -/6 -/6 406 CM 6 HMF 2' 40 6 PC CM 6 HMF W/FAST 2' 40 6 PC 4028 CM 6 HMF W/FAST 2' 2 24 PC CM 6 HMF W/FAST NEW 2' PC 4020 CM 6 HEA W/FAST 2' 40 6 pc 4068 CM 6 HN W/FAST 2' PC 9064 CM 6 HBRZ W/FAST NEW PC 4066 CM 6 HB 2' 40 6 PC 4087 CM 6 HB W/FAST 2' 40 6 PC 4024 CM 6 HB W/FAST 2' 2 24 PC CM 6 HB W/FAST NEW 2' PC 402 CM 6 HBDB W/FAST 2' 2 24 PC 4022 CM 6 HBDB W/FAST NEW 2' PC 9048 CM 6 CVG W/FAST 2' PC 4067 CM 6 ORB 2' 2 24 pc Drilled and countersunk, 6" centers for # fastener - DIE 4 /6" Deluxe Stair Nosing -/6 -/ CM 60 HMF 2' PC 4060 CM 60 HMF W/FAST 2' PC 0704 CM 60 HN W/FAST 2' PC 4060 CM 60 HB 2' PC 406 CM 60 HB W/FAST 2' PC CM 60 HBDB W/FAST 2' 2 22 pc 89 CM 60 CVG W/FAST 2' 2 22 pc 4022 CM 60 OAK W/FAST NEW 2' PC 402 CM 60 CHERRY W/FAST NEW 2' PC 4024 CM 60 GUNSTOCK W/FAST NEW 2' PC Drilled and countersunk, 6 centers for # fastener - DIE 007 /6" Scribe-to Stair Nosing -/6 /2 -/ CM 602 HMF 2' 40 8 pc CM 602 HB 2' 40 8 pc Drilled and countersunk, 6" centers for # fastener - DIE 047 /8" Standard Wide Tread Stair Nosing -/8-7/ CM 6 HMF W/ FAST 2' 2 2 PC 4022 CM 6 HN W/FAST 2' 2 2 pc CM 6 HB W/FAST 2' 2 2 PC Drilled and countersunk, 6" centers for #0 fastener - DIE *Illustrations do not represent actual size.

17 Carpet Metal Trims /8" Deluxe Stair Nosing -/8 -/ CM 60 HMF 2' 2 28 PC 409 CM 60 HMF W/FAST 2' 2 28 PC 4066 CM 60 HEA 2' 2 28 pc 4069 CM 60 HN W/FAST 2' 2 28 PC 404 CM 60 HBRZ W/FAST 2' 2 28 pc 4066 CM 60 HB 2' 2 28 PC 4092 CM 60 HB W/FAST 2' 2 28 PC 409 CM 60 HBDB W/FAST 2' 2 28 pc CM 60 CVG W/FAST 2' 2 28 pc 408 CM 60 ORB 2' 2 28 pc C A R P E T M E T A L T R I M S Drilled and countersunk, 6" centers for # fastener - DIE 292 /2" (4mm) LVT Stair Nosing /2 (4mm) -7/6 -/ CM 606 EA NEW 2' 2 4 PC 4077 CM 606 EN NEW 2' 2 4 PC 407 CM 606 BRZ NEW 2' 2 4 PC DIE 0780 /6" (mm) LVT Stair Nosing -/8 /6 (mm) -7/6 894 CM 608 EA NEW 2' 2 4 PC 894 CM 608 EN NEW 2' 2 4 PC 9068 CM 608 BRZ NEW 2' 2 4 PC 8942 CM 608 EB NEW 2' 2 4 PC DIE 0646 /6" (mm) LVT Stair Nosing /6 (mm) -7/ CM 60 EA NEW 2' 2 7 PC 4079 CM 60 EN NEW 2' 2 7 PC 4080 CM 60 BRZ NEW 2' 2 7 PC 2 DIE 087 7/8" Deluxe Stair Nosing -7/8 -/ CM 627 HMF 2' 2 pc 4068 CM 627 HN 2' 2 pc CM 627 HB 2' 2 pc Drilled and countersunk, 6" centers for # fastener - DIE

18 Carpet Metal Trims 2" Standard WIde Tread Stair Nosing -/ CM 67 HMF 2' 2 4 pc 4067 CM 67 HB 2' 2 4 pc Drilled and countersunk, 6" centers for # fastener - DIE " Deluxe Stair Nosing -/ CM 607 HMF 2' 2 2 pc CM 607 HN W/FAST 2' 2 2 pc 4067 CM 607 HB 2' 2 2 pc 2 Drilled and countersunk, 6" centers for # fastener - DIE 446 2" Deluxe Stair Nosing 2 -/ CM 648 HMF W/FAST 2' 2 2 pc CM 648 HN W/FAST 2' 2 2 pc CM 648 HB W/FAST 2' 2 2 pc 4062 CM 648 HBDB W/FAST 2' 2 2 pc Drilled and countersunk, 6" centers for # fastener - DIE " Deluxe Stair Nosing 2 -/ CM 67 HMF 2' 2 pc CM 67 HEA NEW 2' 2 PC CM 67 HN 2' 2 pc CM 67 HB 2' 2 pc CM 67 HBDB 2' 2 pc Drilled and countersunk, 6" centers for # fastener - DIE /2" Commericial Stair Nosing -/2 2-/ CM 60 EA W/FAST 2' 2 pc CM 60 EN W/FAST 2' 2 pc 4089 CM 60 EB W/FAST 2' 2 pc CM 60 BA W/FAST 2' 2 pc Drilled and countersunk, 6 centers for # fastener - DIE 2 6 *Illustrations do not represent actual size.

19 Carpet Metal Trims /4" Commericial Stair Nosing -/8 -/ CM 609 BA 2' 2 60 pc 4068 CM 609 EB 2' 2 60 pc Drilled and countersunk on " alternating for # fastener - DIE 47 C A R P E T M E T A L T R I M S 2 /2" Straight Edge * 6 ", 7 " 2 / 2 " * CM 6 EA 6" 6 EA 4097 CM 7 EA 7" 6 2 EA 4 angle, one end only - DIE CM 44 EA 44" 6 40 EA 90 angle, both ends - DIE 2 7

20 Carpet Metal Trims /2" Coving Cap /2 /4 /6 409 CM 90 MFA 2' 40 0 PC 4087 CM 90 EN 2' 24 8 pc 4096 CM 90 EB 2' 40 0 pc Punched and slotted on 2" centers - DIE 024 /8" Coving Cap /8 /4 / CM 90 HMF 8' pc 409 CM 90 HMF 2' PC 4090 CM 90 MFA 2' PC 4090 CM 90 MFA 8' PC CM 90 EN NEW 2' PC 4092 CM 90 HB 2' pc 409 CM 90 MFB 8' PC CM 90 MFB 2' 2 9 pc Punched and slotted on 2" centers - DIE 744 /2" (4mm) Square Cap 9/2 /2 (4mm) 7/ CM 904 EA NEW 2' 24 2 PC CM 904 EN NEW 2' 24 2 PC 4026 CM 904 BRZ NEW 2' 24 2 PC DIE 08 /6" (mm) Square Cap 9/2 /6 (mm) 7/ CM 90 EA NEW 2' 24 2 PC 4026 CM 90 EN NEW 2' 24 2 PC CM 90 BRZ NEW 2' 24 2 PC DIE *Illustrations do not represent actual size.

21 Carpet Metal Trims /8" (mm) Bevel Cap /8 (mm) 7/6 906 CM 406 EA NEW 2' 24 2 PC 907 CM 406 EN NEW 2' 24 2 PC 908 CM 406 BRZ NEW 2' 24 2 PC DIE 0728 C A R P E T M E T A L T R I M S /2" (4mm) Bevel Cap /2 (4mm) 7/6 90 CM 404 EA NEW 2' 24 2 PC 904 CM 404 EN NEW 2' 24 2 PC 90 CM 404 BRZ NEW 2' 24 2 PC DIE 9920 /6" (mm) Bevel Cap /6 (mm) 7/6 909 CM 40 EA NEW 2' 24 2 PC 9060 CM 40 EN NEW 2' 24 2 PC 906 CM 40 BRZ NEW 2' 24 2 PC DIE 0729 /4" Coving Cap /4 /6 7/ CM 40 HMF 2' 40 9 pc 4099 CM 40 HB 2' 40 9 pc CM 40 MFA 2' 40 9 PC CM 40 MFB 2' 40 9 pc 4040 CM 40 BA 2' 40 9 pc CM 40 EN NEW 2' 40 9 PC Punched and slotted on 2" centers - DIE 7442 /4" Round Coving Cap /4 /8 7/ CM 400 HMF 2' 40 6 pc CM 400 HB 2' 40 6 pc No fabrication. Nail starter lines - DIE

22 Carpet Metal Trims Tee Mouldings / BA 2' 2 6 pc BB 2' 2 6 pc /6 No fabrication - DIE 06 Tee Mouldings EA 2' 2 20 pc BA 2' 2 20 pc BB 2' 2 20 pc /6 No fabrication - DIE 09 Countersunk Oval Head Screw Nails STOCK NUMBER DESCRIPTION FINISH LENGTH X WIDTH PACK drive Nail Silver /4" x.00" 0 lbs bulk 4820 drive Nail Silver /4" x.00" 40 packets of 2/ea drive Nail Silver /4" x.00" 2 packets of 2/ea drive Nail Brass /4" x.00" 0 lbs bulk drive Nail Brass /4" x.00" 40 packets of 2/ea drive Nail Brass /4" x.00" 2 packets of 2/ea drive Nail Nickel /4" x.00" 2 packets of 2/ea drive Nail Nickel /4" x.00" 24 packets of 2/ea drive Nail Nickel /4" x.00" 0 lbs bulk drive Nail Black /4" x.00" 24 packets of 2/ea drive Nail Oak /4" x.00" 24 packets of 2/ea drive Nail Cherry /4" x.00" 24 packets of 2/ea drive Nail Gunstock /4" x.00" 24 packets of 2/ea drive Nail Bronze /4" x.00" 24 packets of 2/ea 20 *Illustrations do not represent actual size.

23 Tile Trims /4" Tile Trim /4 /6 400 TT 4 EA 8' 2 2 pc 4097 TT 4 EN 8' 2 2 pc 4096 TT 4 EB 8' 2 2 pc DIE 8 C A R P E T M E T A L T R I M S /6" Tile Trim /6 / TT 6 EA 8' 2 8 pc 402 TT 6 EN 8' 2 8 pc 40 TT 6 EB 8' 2 8 pc 402 TT 6 BDB 8' 2 8 pc DIE 80 /8" Tile Trim /8 /6 400 TT 8 EA 8' 2 8 pc 408 TT 8 EN 8' 2 8 pc 409 TT 8 EB 8' 2 8 pc 40 TT 8 BDB 8' 2 8 pc 444 TT 8 EBLK 8' 2 8 pc 4062 TT 8 ORB 8' 2 8 pc DIE 8 /2" Tile Trim /2 " /6 " 4040 TT 2 EA 8' 2 8 pc 4099 TT 2 EN 8' 2 8 pc 4098 TT 2 EB 8' 2 8 pc 404 TT 2 BDB 8' 2 8 pc 47 TT 2 EBLK 8' 2 8 pc DIE 82 /8" Tile Trim /8 /6 404 TT 8 EA 8' 2 9 pc DIE

24 Tile Trims /6" Tile Reducer /8 /6 -/6 408 TR 6 EA 8' 2 0 pc 4076 TR 6 EN 8' 2 0 pc 4077 TR 6 EB 8' 2 0 pc 407 TR 6 BDB 8' 2 0 pc DIE 784 /8" Tile Reducer /8 -/6 / TR 8 EA 8' 2 7 pc 4078 TR 8 EN 8' 2 7 pc 4079 TR 8 EB 8' 2 7 pc 4009 TR 8 BDB 8' 2 7 pc DIE 787 /8" Tile Reducer /8 /8 -/2 48 TR 8S EA 8' 2 2 pc 48 TR 8S EN 8' 2 2 pc 480 TR 8S BDB 8' 2 2 pc DIE 9786 /2" Tile Reducer /8 -/6 /2 40 TR 2 EA 8' 2 9 pc 402 TR 2 EN 8' 2 9 pc DIE 786 /6" Carpet Tuck /8 /6 -/ CT 6 EA 8' 2 pc 4080 CT 6 EN 8' 2 pc 408 CT 6 EB 8' 2 pc DIE *Illustrations do not represent actual size.

25 Tile Trims /8" Carpet Tuck /8 /4 -/6 402 CT 8 EA 8' 2 pc 4082 CT 8 EN 8' 2 pc 408 CT 8 EB 8' 2 pc 4022 CT 8 BDB 8' 2 pc 44 CT 8 ORB 8' 2 pc 4 CT 8 EBLK 8' 2 pc DIE 9669 T I L E T R I M S /6" Tile Cap /6 " /6 " 400 TC 6 EA 8' 2 pc DIE 780 /8" Tile Cap /8 " 400 TC 8 EA 8' 2 4 pc 409 TC 8 EB 8' 2 4 pc /6 " DIE 782 /6" Tile Stair Nosing /6 -/6 409 TS 6 EA 8' 2 22 pc 4092 TS 6 EN 8' 2 22 pc 409 TS 6 EB 8' 2 22 pc -7/8 DIE 740 /8" Tile Stair Nosing -7/8 /8 -/6 406 TS 8 EA 8' 2 24 pc 4094 TS 8 EN 8' 2 24 pc 409 TS 8 EB 8' 2 24 pc DIE

26 Tile Trims /8" Tile Stair Nosing /4 /8-9/ SE 8 EA 8' 2 4 pc 4202 SE 8 EN 8' 2 4 pc DIE 9649 /2" Tile Stair Nosing 420 SE 2 EA 8' 2 pc 7/8 /2 DIE 960-9/2 /6" Tile Quarter Round /6 -/2 466 TQ 6 EA 8' 2 0 pc 468 TQ 6 EN 8' 2 0 pc DIE 966 /8" Tile Quarter Round /8 -/2 470 TQ 8 EA 8' 2 pc 472 TQ 8 EN 8' 2 pc 47 TQ 8 EB 8' 2 pc DIE 967 /2" Tile Quarter Round /2 477 TQ 2 EN 8' 2 pc DIE 968-9/2 24 *Illustrations do not represent actual size.

27 Vinyl Trims /4" Cove Stick /4 " VT 0 ' pc Cove stick - DIE 0 T I L E T R I M S /2" Cove Stick /2 " 4607 VT 02 ' pc Cove stick - DIE 02 Carpet Reducers For Glue-Down Carpet /4 " /4 " VT 20 BLK 2' pc VT 20 BRN 2' pc VT 20 GRY 2' pc VT 20 BEIGE 2' pc For glue-down carpets Carpet Reducers For Glue-Down /2 " /6 " 2 /4 " 4600 VT BLK 2' pc 460 VT BRN 2' pc 4602 VT GRY 2' pc 460 VT BEIGE 2' pc For /6" carpet Carpet Reducers For Glue-Down /4 " /4 " 2 " VT 2 BLK 2' 20 pc 4602 VT 2 BRN 2' 20 pc VT 2 GRY 2' 20 pc 4602 VT 2 BEIGE 2' 20 pc For /4" carpet 2

28 Vinyl Trims Carpet Reducers For Glue-Down /6 " /6 " 4600 VT BLK 2' pc 460 VT BRN 2' pc For /6" carpet /4 " Tile Reducers For Resilient Floors /2 " " VT 24 BLK ' 0 8 pc VT 24 BRN ' 0 8 pc VT 24 GRY ' 0 8 pc VT 24 BEIGE ' 0 8 pc With beveled edge for resilient floors Tile Reducers For Resilient Floors /8 " " VT 2 BLK ' 0 7 pc 4602 VT 2 BRN ' 0 7 pc VT 2 GRY ' 0 7 pc 4602 VT 2 BEIGE ' 0 7 pc With beveled edge for resilient floors Over the Top Resilient Reducer /8 " /8 " VT 26 BLK 2' pc VT 26 BRN 2' pc VT 26 GRY 2' pc VT 26 BEIGE 2' pc /8" resilient reducer Tile and Carpet Joiner /8 " " /4 " VT 74 BLK 2' pc 4604 VT 74 BRN 2' pc VT 74 GRY 2' pc 4604 VT 74 BEIGE 2' pc For /4" carpet 26 *Illustrations do not represent actual size.

29 Vinyl Trims Tile and Carpet Joiner /8 " /4 " /4 " 2 /4 " 4600 VT 76 BLK 2' pc 460 VT 76 BRN 2' pc 4602 VT 76 GRY 2' pc 460 VT 76 BEIGE 2' pc For /4" tile or carpet T I L E T R I M S Stair Nosings /4 " /6 " /4 " VT 640 BLK 2' 6 4 pc VT 640 BRN 2' 6 4 pc VT 640 GRY 2' 6 4 pc Heavy duty stair nosing Stair Nosings /4 " /8 " /4 " /8 " VT 642 BLK 2' 2 2 pc VT 642 BRN 2' 2 2 pc VT 642 GRY 2' 2 2 pc VT 642 BEIGE 2' 2 2 pc Square top nosing Stair Nosings 2 " VT 64 BLK 2' 2 42 pc /8 " 4604 VT 64 BRN 2' 2 42 pc VT 64 GRY 2' 2 42 pc /2 " /8 " Commercial stair nosing Stair Nosings 7 /8 " /6 " " /8 " VT 644 BLK 2' 2 78 pc VT 644 BRN 2' 2 78 pc VT 644 GRY 2' 2 78 pc VT 644 BEIGE 2' 2 78 pc Overlap nosing for tile and resilient 27

30 Vinyl Trims Snap-in Dividers and Edges /4 " /8 " VT 704 BLK 2' 20 2 pc VT 704 BRN 2' 20 2 pc VT 704 GRY 2' 20 2 pc VT 704 BEIGE 2' 20 2 pc Standard edge tee Snap-in Dividers and Edges /2 " /6 " VT 70 BLK 2' pc 4600 VT 70 BRN 2' pc VT 70 GRY 2' pc VT 70 BEIGE 2' pc Insert tee Snap-in Dividers and Edges 2 " /6 " VT 706 BLK NEW 2' PC VT 706 BRN NEW 2' PC VT 706 GRY NEW 2' PC VT 706 BEIGE NEW 2' PC Insert tee Snap-in Dividers and Edges /4 " VT 70 BLK 2' pc 4600 VT 70 BRN 2' pc VT 70 GRY 2' pc VT 70 BEIGE 2' pc Standard edge tee Carpet Coving Cap /6 " /6 " /8 " VT 40 BLK 2' pc 4600 VT 40 BRN 2' pc VT 40 GRY 2' pc 4600 VT 40 BEIGE 2' pc Flexible carpet cove cap 28 *Illustrations do not represent actual size.

31 Vinyl Trims Carpet Coving Cap /8 " /4 " /4 " VT 46 BLK 2' 0 2 pc VT 46 GRY 2' 0 2 pc 4606 VT 46 BEIGE 2' 0 2 pc Square cove cap V I N Y L T R I M S Single Flange Track /4 " 4600 VT 2 WHITE 2' pc Flange track 29

32 Wallboard & Trim Moldings /8" Cove /6 " 4090 TM 87 EN 2' pc /8 " DIE 047 9/6 " /2" Cove /4 " /4 " /2 " 408 TM 8 MFA 2' 40 4 pc 4088 TM 8 BDB 2' 40 4 pc DIE 6 /6" Cove /6 " /6 " TM 90 MFA 2' pc DIE 026 /4 " /6" Cove 7 /2 " /6 " /6 " 4090 TM 9 MFA 2' 40 0 pc TM 9 MFB 2' 40 0 pc DIE 026 /6" Cove /6 " /6 " 4090 TM 92 MFA 2' pc 409 TM 92 MFB 2' pc DIE 0426 /8 " 0 *Illustrations do not represent actual size.

33 /6" Cove Wallboard & Trim Moldings /4 " 409 TM 98 MFA 2' 40 pc V I N Y L T R I M S /6 " DIE 7 /6 " /6" Cap /8 " 27 /2 " /6 " TM 72 EN 2' 24 7 pc TM 72 BA 8' pc DIE 0044 /6" Cap /6 " /6 " BBDA 2' 2 8 pc DIE 78 " /2" Cap /8 " /2 " BA 2' 2 8 pc DIE /8 " /6" Outside Corner /6 " 409 TM 9 BA 2' 40 4 pc /6 " /6 " 7/8 " DIE 002

34 Wallboard & Trim Moldings /6" Division /6 " /6 " " TM 94 BA 2' 40 6 pc DIE 002 /2" Division /8 " /2 " /4 " WB 0 EA 8' 0 44 pc DIE 044 /4" Division /4 " /4 " 4400 WB 0 BA 8' 00 8 pc DIE 26 /8 " /6" Cap /6 " /6" 2 /2 " TM 80 MFA 2' pc DIE 24 /6" Flat Back Cap /6 " /6" 2 /2 " 4080 TM 8 MFA 2' pc DIE *Illustrations do not represent actual size.

35 Wallboard & Trim Moldings /6" Deep Slot Cap /2" Wide Face Cap /6 " /4 " /2 " /4 " /6 " TM 84 MFA 2' pc DIE TM 82 MFA 2' pc 408 TM 82 MFB 2' pc W A L L B O A R D & T R I M M O L D I N G S /6 " DIE 024 /2" Cap /6 " 408 TM 8 MFA 2' pc /2 " DIE 24 /6 " /8" Cap /8 " /8 " WB 04 EA 8' 0 84 pc WB 04 BA 8' 0 84 pc /4 " DIE 244 2/2" Offset Drill Cove 9/6 " 2/2 " 9/6 " 4020 TM 2 BA 2' 40 7 pc DIE 026

36 Futura Industries Building H- Freeport Center Post Office Box 600 Clearfield, UT /0/