KONE MaxiSpace Planning Guide

Transcription

1 KONE MaxiSpace Planning Guide

2 KONE MaxiSpace planning information KONE MaxiSpace Roping 6:1 Roping 10:1 Speed 1.0 m/s 0.63 m/s Load kg kg DD/WD min. (Slim doors, Recess=0) 800/1070 mm 1000/1250 mm DD/WD min. (Slim doors, Recess=60) 800/1010 mm 1000/1190 mm DD/WD min. (Folding/Swing doors) 800/1020 mm 1000/1200 mm BB/WW min. 750/1000 mm 750/1000 mm Floors max., A side Entrances max Travel max m 25 m Pit min. 800 mm 800 mm Headroom min mm 3100 mm Default delivery for loads between 320kg and 480kg is roping 6:1 (both speeds available). Door types and minimum shaft dimensions BB = car width DD = car depth WW = shaft width WD = shaft depth KONE ReNova Slim L3/C3 4-panel center opening door 1000 WW KONE KES 201 L1/C1 2-panel center opening door 1420 WW Recess = 0 Recess = WD 1070 WD KONE ReNova Slim L4/C4 3-panel side opening door 1000 WW KONE KES 201 L2/C2 2-panel side opening door 1200 WW Swing door with 4-panel folding car door 1000 WW 1140 WD Recess = 0 Recess = WD 1020 WD Modern KONE ReNova Slim and KONE KES 201 doors are developed for passenger elevators handling medium-intensity traffic. KONE KES 600 doors are meant for commercial and midrise residential buildings where customer expectations are high. In cases where there are swing doors on landings, the car door can be either the KONE ReNova Slim or a folding door type. An important consideration when selecting the door type is the available space in the existing elevator shaft versus the desired new car dimensions. Shaft requirements for different door types Shaft depth Shaft width WD (minimum) WW (minimum) KONE ReNova Slim L3/C KONE ReNova Slim L4/C KONE KES 201 L1/C KONE KES 201 L2/C KONE KES600 L1/C KONE KES600 L2/C Swing door with folding car door

3 Car Interiors Basic Spring M3110A Signalisation: KSS 420 Walls: Castellance Aluminium AL2 Floor: Detroit Grey RC5 Skirting: None Basic Summer M3120A Signalisation: KSS 420 Walls: Savannah Ivory AL1 Floor: Detroit Grey RC5 Skirting: None Basic Autumn M3131 Signalisation: KSS 420 Walls: Savannah Ivory AL1 Floor: Dallas Black RC6 Skirting: None Basic Winter M3141 Signalisation: KSS 420 Walls: Torino Satin AL3 Floor: Dallas Black RC6 Skirting: None Mid Spring M5110A Signalisation: KSS 470 Walls: Belize Latte L33 Mid Summer M5120A Signalisation: KSS 470 Walls: Siena Terracotta L15A Mid Autumn M5231 Signalisation: KSS 470 Walls: Washington Cherry L13 Mid Winter M5241A Signalisation: KSS 470 Walls: Siena Terracotta L15A These interiors are designed by KONE architects. You can also freely mix and match all available materials and components to create your own unique elevator interior. 3

4 Car Interiors High Spring M7111A Walls: Washington Cherry L13 High Summer M7121A Walls: Langkawi Grey L34 High Autumn M7231 Walls: Malibu Bronze L32 High Winter M7241 Walls: Toronto Red L35 Deco Spring D8111A Walls: Salava (T21) and Asturias Satin F Deco Summer D8121A Walls: Taiga (T22) and Castellance Aluminium AL2 Deco Autumn D8131 Walls: Taiga (T23) and Asturias Satin F Deco Winter D8141 Mirror: Full height, rear-wall Walls: Salava (T24) and Castellance Aluminium AL2 These interiors are designed by KONE architects. You can also freely mix and match all available materials and components to create your own unique elevator interior. 4

5 Signalization KSC 420 (with 7-segment KSC 470 (with 7-segment KSC 140 (scrolling dot matrix KSI 470 KSC 421 (with dot matrix KSC 471 (with dot matrix KSI 471 KSH 470 KSL 420 KSL 470 KSI 143 KSH 140 KSH 140 KSL 140 KSC D20 (with scrolling dot matrix Snow White Horizon Blue Almond Green Amber Red Ivory Black Cherry Blossom Silver Grey Saphire Blue Evergreen Anthracite Black Mist Green Sand Beige Custom faceplate Create your own tenant directory with stylish faceplate designs or an original faceplate with your own original graphics. The COP faceplate can be designed in three simple steps in a few minutes using the tool in the salesperson s laptop. KSL D40 KSI D42 KSL D20 KSH D20 Ivory Black Snow White Amber Red Horizon Blue Almond Green Selection of 5 solid colors is available for landing devices. 5

6 Car Interior Ceilings Finishing of the ceilings is Asturias Satin F stainless steel. LF 94S Surface mounted lamp with fluorescent tube LF86 LED spot lights All ceilings can be used also with a trap door. Handrails Handrail is available on rear wall and side walls. Handrail can be used with all mirror types. HR50 made of aluminium, with straight ends HR51 made of stainless steel, with straight ends HR53 made of stainless steel, with rounded ends (EN 81-70) HR54 made of wood, with straight ends Mirrors Clear type and smoked type mirrors are available. The mirrors are available in two formats: partial height and full height. Mirror position can be on rearwall or/and opposite to COP. Mirror is not available on COP wall and can be provided without handrail. Car Interior materials KONE Deco Design walls T21 Salava T22 Taiga T23 Taiga T24 Salava Pattern design by Marimekko 6

7 Car Interior materials Walls Composite aluminium Stainless Steel Wood veneer AL1 Savannah Ivory Laminate AL2 Castellance aluminium AL3 Torino Satin F Asturias Satin K Scottish Quad M Flemish Linen L13 Washington Cherry L15A Siena Terracotta L32 Malibu Bronze L33 Belize Latte L34 Langkawi Grey L35 Toronto Red L36 Northern Oakwook Floor Rubber Composite stone Wood laminate RC4 Alexandria Blue RC5 Detroit Grey RC6 Dallas Black SF2 Diorite Black SF5 Bianco Perla RW1 America Ciliegio Vinyl VF5 Philadelphia Zinc VF6 Philadelphia Copper 7

8 KONE provides innovative and eco-efficient solutions for elevators, escalators and automatic building doors. We support our customers every step of the way; from design, manufacturing and installation to maintenance and modernization. KONE is a global leader in helping our customers manage the smooth flow of people and goods throughout their buildings. Our commitment to customers is present in all KONE solutions. This makes us a reliable partner throughout the life-cycle of the building. We challenge the conventional wisdom of the industry. We are fast, flexible, and we have a well-deserved reputation as a technology leader, with such innovations as KONE MonoSpace, KONE MaxiSpace, and KONE InnoTrack. You can experience these innovations in architectural landmarks such as the Trump Tower in Chicago, the 30 St Mary Axe building in London, the Schiphol Airport in Amsterdam and the Beijing National Grand Theatre in China. KONE employs over 32,000 dedicated experts to serve you globally and locally in over 50 countries. KONE Corporation This publication is for general informational purposes only and we reserve the right at any time to alter the product design and specifications. No statement contained in this publication shall be construed as a warranty or condition, express or implied, as to any product, its fitness for any particular purpose, merchantability, quality or shall be interpreted as a term or condition of any purchase agreement for the products or services contained in this publication. Minor differences between printed and actual colors may exist. KONE MaxiSpace and KONE ReNova are trademarks or registered trademarks of KONE Corporation. Copyright 2011 KONE Corporation. 7336