HCI SERIES 2500 PSI DOUBLE ACTING TIE ROD CYLINDER

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "HCI SERIES 2500 PSI DOUBLE ACTING TIE ROD CYLINDER"

Transcription

1 1. Pin Clip High tensile zinc-plated steel 2. Pin High tensile zinc-plated steel 3. Port Plug Plastic 4. Piston Nut Lock nut, grade 8, high tensile zinc-plated 5. Tie Rod ASTM 5140, high tensile, rolled threads for durability 6. Tube High tensile cold drawn tube, precision honed for extended seal life 7. Rod High tensile SAE C1045, ground & polished hard chrome plated rod 8. Tie rod nut Grade 8 9. Female Rod Clevis Ductile iron ASTM A Clevis Clamp Bolt Grade Clevis Clamp Nut Grade Gland Ductile iron ASTM A Piston Ductile iron ASTM A for excellent life 14. Port Plug (Sealed) Steel w/teflon tape 15. Cap Ductile iron ASTM A A. Wiper Polyurethane B. Rod seal Standard PolyPak with B lip design (Polyurethane U-cup with nitrile O-ring expander) C. Tube seal O-ring D. Piston ID Seal O-ring E. Piston OD seal Bronze impregnated PTFE piston ring w/rectangular CS nitrile expander

2 ASAE STROKE CYLINDER ASAE Cylinders meet ASAE(American Society of Agricultural Engineers) specifications. These specifications establish common mounting i.e.(pin to pin dimensions) and clearance dimensions i.e.(clevis cap/rod clevis throat width and pin diameters) for cylinders and traliling-type agricultural implements. This criteria is only applicable to 8 and 16 stroke cylinders. All 2 through 4 bore cylinders with 8 stroke are designed with the rod threaded to accommodate a stroke control collar per ASAE specifications. NON ASAE STROKE CYLINDER NON ASAE cylinders are designed per ASAE requirements, however are not classified ASAE due to their varying pin to pin dimensions /8 NPTF(SAE 6#) /8 NPTF(SAE 6#) /2 NPTF(SAE 8#) /2 NPTF(SAE 8#) /2 NPTF(SAE 8#) /2 NPTF(SAE 8#) UNF UNF UNF UNF UNF UNF A*: 12.50" for 8" stroke ASAE cylinders and 15.50" for 16" stroke ASAE cylinders; C*: (PORT): NPTF is standard and SAE port is available; R*: (Pin diameter): 1.25" for 16" stroke ASAE cylinder form 3.0" to 5" bore.

3 2.00 Bore 2500 PSI Double Acting TIE ROD Cylinder /8 NPTF(SAE 6#) UNF HCI2004T 2 X 4 1 1/8 14 1/4 18 1/4 Full PSI HCI2006T 2 X 6 1 1/8 16 1/4 22 1/4 Full PSI HCI2008T 2 X 8 1 1/8 18 1/4 26 1/4 Full PSI HCI2008T-ASAE 2 X 8 1 1/8 20 1/4 28 1/4 Full PSI HCI2010T 2 X /8 20 1/4 30 1/4 Full PSI HCI2012TR 2 X /8 22 1/4 34 1/4 Full PSI HCI2014TR 2 X /8 24 1/4 38 1/4 Full PSI HCI2016TR 2 X /8 26 1/4 42 1/4 Full PSI HCI2018TR 2 X /8 28 1/4 46 1/4 Full PSI HCI2020TR 2 X /8 30 1/4 50 1/4 Full PSI HCI2024TR 2 X /8 34 1/4 58 1/4 * HCI2030TR 2 X /8 40 1/4 70 1/4 * HCI2036TR 2 X /8 46 1/4 82 1/4 *

4 2.50 Bore 2500 PSI Double Acting TIE ROD Cylinder /8 NPTF(SAE 6#) UNF HCI2504TR 2 1/2 X 4 1 1/8 14 1/4 18 1/4 Full PSI HCI2506TR 2 1/2 X 6 1 1/8 16 1/4 22 1/4 Full PSI HCI2508TR 2 1/2 X 8 1 1/8 18 1/4 26 1/4 Full PSI HCI2508T-ASAE 2 1/2 X 8 1 1/8 20 1/4 28 1/4 Full PSI HCI2510TR 2 1/2 X /8 20 1/4 30 1/4 Full PSI HCI2512TR 2 1/2 X /8 22 1/4 34 1/4 Full PSI HCI2514TR 2 1/2 X /8 24 1/4 38 1/4 Full PSI HCI2516TR 2 1/2 X /8 26 1/4 42 1/4 Full PSI HCI2516T-ASAE 2 1/2 X /8 31 1/2 47 1/2 Full PSI HCI2518TR 2 1/2 X /8 28 1/4 46 1/4 Full PSI HCI2520TR 2 1/2 X /8 30 1/4 50 1/4 Full PSI HCI2524TR 2 1/2 X /8 34 1/4 58 1/4 * HCI2530TR 2 1/2 X /4 40 1/4 70 1/4 * HCI2536TR 2 1/2 X /4 46 1/4 82 1/4 *

5 /2 NPTF(SAE 8#) UNF Bore 2500 PSI Double Acting TIE ROD Cylinder HCI3004TR 3 X 4 1 1/4 14 1/4 18 1/4 Full PSI HCI3006TR 3 X 6 1 1/4 16 1/4 22 1/4 Full PSI HCI3008TR 3 X 8 1 1/4 18 1/4 26 1/4 Full PSI HCI3008T-ASAE 3 X 8 1 1/4 20 1/4 28 1/4 Full PSI HCI3010TR 3 X /4 20 1/4 30 1/4 Full PSI HCI3012TR X /4 22 1/4 34 1/4 Full PSI HCI3012TR X /2 22 1/4 34 1/4 Full PSI HCI3014TR X /4 24 1/4 38 1/4 Full PSI HCI3014TR X /2 24 1/4 38 1/4 Full PSI HCI3016TR X /4 26 1/4 42 1/4 Full PSI HCI3016T-ASAE 3 X /4 31 1/2 47 1/2 Full PSI HCI3016TR X /2 26 1/4 42 1/4 Full PSI HCI3018TR 3 X /4 28 1/4 46 1/4 * HCI3020TR 3 X /4 30 1/4 50 1/4 * HCI3024TR X /4 34 1/4 58 1/4 Full PSI HCI3024TR X /2 34 1/4 58 1/4 Full PSI HCI3030TR 3 X /2 40 1/4 70 1/4 * HCI3036TR 3 X /2 46 1/4 82 1/4 *

6 3.50 Bore 2500 PSI Double Acting TIE ROD Cylinder /2 NPTF(SAE 8#) UNF HCI3504TR 3 1/2 X 4 1 1/4 14 1/4 18 1/4 Full PSI HCI3506TR 3 1/2 X 6 1 1/4 16 1/4 22 1/4 Full PSI HCI3508TR 3 1/2 X 8 1 1/4 18 1/4 26 1/4 Full PSI HCI3508T-ASAE 3 1/2 X 8 1 1/4 20 1/4 28 1/2 Full PSI HCI3510TR 3 1/2 X /4 20 1/4 30 1/4 Full PSI HCI3512TR 3 1/2 X /4 22 1/4 34 1/4 Full PSI HCI3514TR 3 1/2 X /4 24 1/4 38 1/4 Full PSI HCI3516TR 3 1/2 X /4 26 1/4 42 1/4 * HCI3516T-ASAE 3 1/2 X /2 31 1/4 47 1/2 * HCI3518TR 3 1/2 X /4 26 1/4 46 1/4 * HCI3520TR 3 1/2 X /4 30 1/4 50 1/4 * HCI3524TR 3 1/2 X /2 34 1/4 58 1/4 * HCI3530TR 3 1/2 X /2 40 1/4 70 1/4 * HCI3536TR 3 1/2 X /2 46 1/4 82 1/4 *

7 4.00 Bore 2500 PSI Double Acting TIE ROD Cylinder /2 NPTF(SAE 8#) UNF HCI4004TR 4 X 4 1 1/4 14 1/4 18 1/4 Full PSI HCI4006TR 4 X 6 1 1/4 16 1/4 22 1/4 Full PSI HCI4008TR 4 X 8 1 1/4 18 1/4 26 1/4 Full PSI HCI4008T-ASAE 4 X 8 1 1/2 20 1/4 28 1/4 Full PSI HCI4010TR 4 X /4 20 1/4 30 1/4 Full PSI HCI4012TR 4 X /4 22 1/4 34 1/4 * HCI4014TR 4 X /4 24 1/4 38 1/4 * HCI4016TR 4 X /4 26 1/4 42 1/4 * HCI4016T-ASAE 4 X /2 47 1/2 * HCI4018TR 4 X /2 28 1/4 46 1/4 Full PSI HCI4020TR 4 X /2 30 1/4 50 1/4 * HCI4024TR X /2 34 1/4 58 1/4 * HCI4024TR X /4 34 1/4 58 1/4 Full PSI HCI4024TR X /4 58 1/4 Full PSI HCI4030TR 4 X /4 70 1/4 Full PSI HCI4036TR 4 X /4 82 1/4 Full PSI HCI4048TR 4 X / /4 *

8 5.00 Bore 2500 PSI Double Acting TIE ROD Cylinder /2 NPTF(SAE 8#) UNF HCI5008TR 5 X 8 1 1/2 18 1/4 26 1/4 Full PSI HCI5010TR X /2 20 1/4 30 1/4 Full PSI HCI5010TR X /4 30 1/4 Full PSI HCI5012TR 5 X /4 34 1/4 Full PSI HCI5014TR 5 X /4 38 1/4 Full PSI HCI5016TR 5 X /4 42 1/4 Full PSI HCI5016T-ASAE 5 X /2 47 1/2 Full PSI HCI5018TR 5 X /4 46 1/4 Full PSI HCI5020TR 5 X /4 50 1/4 Full PSI HCI5024TR 5 X /4 58 1/4 Full PSI HCI5030TR 5 X /4 70 1/4 * HCI5036TR 5 X /4 82 1/4 *

TABLE OF CONTENTS. HTR Tie-Rod Cylinder 2500 PSI HTH Tie-Rod Cylinder 3000 PSI HCL Welded Cylinder 3000 PSI... 11

TABLE OF CONTENTS. HTR Tie-Rod Cylinder 2500 PSI HTH Tie-Rod Cylinder 3000 PSI HCL Welded Cylinder 3000 PSI... 11 TABLE OF CONTENTS HTR Tie-Rod Cylinder 2500 PSI... 3 HTH Tie-Rod Cylinder 3000 PSI... 7 HCL Welded Cylinder 3000 PSI... 11 HBU Welded Cylinder 3000 PSI... 14 HTG Welded Cylinder 3000 PSI... 18 HSP Snow

More information

2 and 2-1/2 have 3/8 NPT Ports

2 and 2-1/2 have 3/8 NPT Ports LION HYDRAULIC TIE-ROD CYLINDERS M1 Double Ported NPFT Inline Ports 2 and 2-1/2 have 3/8 NPT Ports These top 10 cylinders listed are all ASAE Rest have 1/2 NPT ports The remainder of the cylinders are

More information

500 Hydraulic H-09 -DBZ H-09 -DUZ H-09 -DZ 1-1/16" Bore 500 Hydraulic Push Force =.886 x psi Pull Force =.776 x psi Front Block Mount Base Weight:.57

500 Hydraulic H-09 -DBZ H-09 -DUZ H-09 -DZ 1-1/16 Bore 500 Hydraulic Push Force =.886 x psi Pull Force =.776 x psi Front Block Mount Base Weight:.57 HEX-STUD made from heat treated alloy steel. In case of failure due to overload, the hexagon portion will remain in rod and can be easily removed Buna N rod wiper seal assures dry drip free piston rod

More information

CAVITATION PLATE HARDWARE

CAVITATION PLATE HARDWARE CAVITATION PLATE HARDWARE DELUXE ADJUSTABLE CAVITATION PLATE HARDWARE The deluxe kit is furnished with Item #580 bronze chrome pillow transom blocks with 7/8 bronze bushings. The deluxe kit uses the stainless

More information

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic CL SERIES Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders Pressure Rating: CLA-50 PSI Pneumatic CLH-250 PSI Pneumatic CLH-,500 PSI Hydraulic Construction CLA /4" AND /8" BORES & CLH /8" BORE ONLY CLA

More information

BULLETIN 74.00-2 DECEMBER 2011. DeZURIK POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS

BULLETIN 74.00-2 DECEMBER 2011. DeZURIK POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS BULLETIN 74.00-2 DECEMBER 2011 DeZURIK POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22

More information

AA SERIES. Light-Duty Aluminum Pneumatic Cylinders Pressure Rating 200 PSI

AA SERIES. Light-Duty Aluminum Pneumatic Cylinders Pressure Rating 200 PSI AA SERIES Light-Duty Aluminum Pneumatic Cylinders Pressure Rating 200 PSI Parts List 1 1 /2", 2" AND 2 1 /2" BORE SIZE 3 27 13 21 24 25 1 71 33 16B 30 1,2 Head and Cap Accurately machined from aluminum

More information

Using Pneumatic Cylinders in Rivet, Hole Punch & Broaching applications

Using Pneumatic Cylinders in Rivet, Hole Punch & Broaching applications How to control pneumatic cylinder forces Using Pneumatic Cylinders in Rivet, Hole Punch & Broaching applications Begin with force-multiplying Pneumatic Cylinders Multi-Power Air Cylinders from Fabco-Air

More information

How to Order 3MA Series Cylinders for 1 1 / 2 " to 5" Bore 3MA cylinders can be specified by model number by using the table below.

How to Order 3MA Series Cylinders for 1 1 / 2  to 5 Bore 3MA cylinders can be specified by model number by using the table below. Tie Style Pneumatic s MA Series /" to 5".00 How to Order MA Series s for / " to 5" MA cylinders can be specified by model number by using the table below. C J MA U 4 A C 6.000.50.00.50.5 4.00 5.00 Cushion

More information

FEATURES Rods are threaded and bonded to piston The original miniature pneumatic cylinder Buna-N U -cup rod seals for smooth leakproof operation Buna-

FEATURES Rods are threaded and bonded to piston The original miniature pneumatic cylinder Buna-N U -cup rod seals for smooth leakproof operation Buna- MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.

More information

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner

More information

DOUBLE ACTING CYLINDERS, Ø 25 to 200 mm

DOUBLE ACTING CYLINDERS, Ø 25 to 200 mm DOUBLE ACTING CYLINDERS, 25 to 200 mm CONFORMING WITH CNOMO / AFNOR STANDARDS TRINORM CNOMO / AFNOR - SERIES 437 - TYPE: PCN 2 P245-GB-R3a Series 437 Type: PCN CONSTRUCTION Barrel : stainless ( 25), drawn

More information

Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies

Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

Standard & Metric Fasteners

Standard & Metric Fasteners Standard & Metric Fasteners 04PK 9417PK 1/4-0 x /16 3/4 O.D. Loose Washer 7/16 Indented Hex Head Dog Point Body Bolts Ford # 57030-S Pcs. 9867PK 1/4-0 x 1 5/8 O.D. Loose Washer 7/16 Indented Hex Head Dog

More information

ON-OFF FLOAT CONTROL VALVE

ON-OFF FLOAT CONTROL VALVE ON-OFF FLOAT CONTROL VALVE (4 and Smaller) /08 Schematics Opens when float reaches low level stop Closes when float reaches high level stop Low and High Level stop collars are adjustable P/L X Standard

More information

ACT-112. Series N Actuators 1-1/8" to 4" bore sizes. Actuators. Options selector

ACT-112. Series N Actuators 1-1/8 to 4 bore sizes. Actuators. Options selector ctuators Series ctuators Precision machined 00 Series stainless steel components. Cylinders rated to 50 PSI air, 400 PSI hydraulic (non-shock). Designed for non-lube service. Switches available on all

More information

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431) Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,

More information

GRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A.

GRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A. GRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A. FORM NO. 79023737A JULY, 2005 1 FORWARD ALPHABETICAL INDEX The complete alphabetical index appears at the

More information

Mueller B-101 and A-3 Drilling and Tapping Machines

Mueller B-101 and A-3 Drilling and Tapping Machines TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology

More information

4050A. Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies

4050A. Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies 4050A Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies Parts Identification READ these instructions before placing unit in service KEEP these and other materials

More information

Lehigh High Pressure Hydraulic Cylinders Nominal Pressure 3000 PSI* (5000 PSI Non-Shock) Manufacturing Engineering At It s Best

Lehigh High Pressure Hydraulic Cylinders Nominal Pressure 3000 PSI* (5000 PSI Non-Shock) Manufacturing Engineering At It s Best Lehigh High Pressure Hydraulic Cylinders Nominal Pressure 3000 PSI* (5000 PSI Non-Shock) Manufacturing Engineering At It s Best To meet today s wide range of advanced technology for pressure and force

More information

Velocity and Feed Controllers

Velocity and Feed Controllers VC with Fine Adjustment 78 ACE VC s are sealed hydraulic units fitted with a high precision metering element. When the piston rod is depressed the hydraulic oil is forced through the adjustable precision

More information

4 HEAD WEAR RING 9 PIN SEAL 6 PISTON SEAL

4 HEAD WEAR RING 9 PIN SEAL 6 PISTON SEAL Seal Identification What is a Seal? A seal is a device which prevents the escape or passage of a fluid (liquid or gas). A hydraulic cylinder seal is used to seal two surfaces under fluctuating pressure

More information

1-3/4" Bore Air Cylinders

1-3/4 Bore Air Cylinders 1-3/4" Bore Air Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Available as an Option Bronze Rod Guide Bushing Standard Force Exerted Approximately 2.4 of Air

More information

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines 40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3

More information

MAXICUT FLEX WING MOWERS

MAXICUT FLEX WING MOWERS MAXICUT 600 FLEX WING MOWERS PARTS MANUAL 5301-04 - 12 Twose of Tiverton Limited 6 Chinon Court, Lower Moor Way, Tiverton Business Park, Tiverton, Devon. EX16 6SS. Telephone: (01884) 253691 Fax: (01884)

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

High Pressure Equipment Pressure Vessels and Reactors Index

High Pressure Equipment Pressure Vessels and Reactors Index Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard

More information

Index. Metric Hex Head Fasteners. Metric Socket Head Fasteners. Metric Threaded Rod. Metric Nuts :Metric Hex Nuts :Metric Weld Nuts :Metric Shaft Nuts

Index. Metric Hex Head Fasteners. Metric Socket Head Fasteners. Metric Threaded Rod. Metric Nuts :Metric Hex Nuts :Metric Weld Nuts :Metric Shaft Nuts Index Section A Metric Hex Head Fasteners Section B Metric Socket Head Fasteners Section C Metric Threaded Rod Section D Section E Section F Metric Nuts :Metric Hex Nuts :Metric Weld Nuts :Metric Shaft

More information

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25 TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140

More information

PVM Piston Pumps Service Manual

PVM Piston Pumps Service Manual PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...

More information

MANUFACTURERS OF STUD BOLTS, THREADED RODS, ANCHOR BOLTS, HEX BOLTS, SOCKET SCREWS, HEX NUTS & WASHERS

MANUFACTURERS OF STUD BOLTS, THREADED RODS, ANCHOR BOLTS, HEX BOLTS, SOCKET SCREWS, HEX NUTS & WASHERS MANUFACTURERS OF STUD BOLTS, THREADED RODS, ANCHOR BOLTS, HEX BOLTS, SOCKET SCREWS, HEX NUTS & WASHERS PRODUCT DESCRIPTION STANDARD / SIZE MATERIAL/ THREAD TYPE RANGE GRADE/FINISH Full Threaded Hexagon

More information

Cylinders DIN ISO 6431 and VDMA 24 562

Cylinders DIN ISO 6431 and VDMA 24 562 Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets

More information

Hydraulic Cylinders Heavy-Duty Large Bore Tie Rod Type

Hydraulic Cylinders Heavy-Duty Large Bore Tie Rod Type Hydraulic Cylinders Heavy-Duty Large Bore Tie Rod Type Catalog Series VG Table of Contents Design Features...3 Model Code...4 How to Order...6 Mounting Style & Installation...7 Mounting Application Guide...7

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

Hardware

Hardware Hardware www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620) 442-7583

More information

High Lift Transmission Jack

High Lift Transmission Jack SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales:

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated

More information

Boiler Access and Observation Doors Fabricated for safety, security and reliability

Boiler Access and Observation Doors Fabricated for safety, security and reliability Boiler Access and Observation Doors Fabricated for safety, security and reliability With Alstom behind me... I m in control Boiler Access and Observation Doors WITH ALSTOM I M IN CONTROL Alstom is a leader

More information

TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves

TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

LCG Series. Specifications. Stroke length. Linear slide cylinder Double acting single rod type. Bore size: 6, 8, 12, 16, 20, 25.

LCG Series. Specifications. Stroke length. Linear slide cylinder Double acting single rod type. Bore size: 6, 8, 12, 16, 20, 25. Linear slide cylinder Double acting single rod type Bore size: 6, 8, 2, 6, 20, 25 JIS symbol Specifications Descriptions LCG Bore size mm 6 8 2 6 20 25 Actuation Working fluid Double acting Compressed

More information

PNEUMATIC CONTROL VALVES SERVICE AND MAINTENANCE PROCEDURES

PNEUMATIC CONTROL VALVES SERVICE AND MAINTENANCE PROCEDURES PNEUMATIC CONTROL VALVES SERVICE AND MAINTENANCE PROCEDURES CONFIDENTIALITY NOTICE This document contains subject matter in which KMT Waterjet Systems has proprietary rights. Recipients of this document

More information

Our most popular press model. features. specifications model number capacity H-FRAME PRESSES. Hand operation for economical performance.

Our most popular press model. features. specifications model number capacity H-FRAME PRESSES. Hand operation for economical performance. H-FRAME PRESSES Our most popular press model. features Hand operation for economical performance. Rapid ram return starts as soon as release valve is opened and may be stopped at any point by closing the

More information

Experience In Motion. Valtek Spring Cylinder Linear Actuators

Experience In Motion. Valtek Spring Cylinder Linear Actuators Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

Compact Cylinder Single Acting, Single Rod. How to Order /2" Cylinder stroke (in)

Compact Cylinder Single Acting, Single Rod. How to Order /2 Cylinder stroke (in) ompact ylinder Single cting, Single Rod Series N8 size: 056 (9/16 ), 075 (/ ), 106 (1-1/16 ), 150 (1-1/ ), 00 ( ), 50 (-1/ ) ithout auto switch ith auto switch B M N Built-in magnet pplicable uto Switches

More information

Heavy Duty Bolted Cylinders

Heavy Duty Bolted Cylinders Heavy Duty Bolted Cylinders COUNT ON THE HYDRAULICS EXPERT In any hydraulics system, a combination of critical components convert power into productive, efficient motion. If you re looking for superior

More information

Flat Cylinders Flat-I Square Flat-I 2.3-2.11 2.12-2.18 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories EF1 Cylinders EF2 Cylinders EFP and

More information

COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN

COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN SERIES MECHANICAL SWEEPERS pn GS328985 REV B MAY 2012 COPYRIGHT 2012 GLOBAL ENVIRONMENTAL PRODUCTS, INC. ALL RIGHTS RESERVED REV B MAY 2012 Page 2 Common

More information

Original Line Cylinders

Original Line Cylinders Original Line Original Line How to Order Introduction to Bimba Standard Air Three-Position Air with Adjustable Cushions MRS Non-Rotating Air PC Steel Non- Original Line Steel (Bell Ring Style) Original

More information

Bore size: 056 (9/16 ), 075 (3/4 ), 106 (1-1/16 ), 150 (1-1/2 ), 200 (2 ), 250 (2-1/2 ) Rod end male thread. With rubber bumper

Bore size: 056 (9/16 ), 075 (3/4 ), 106 (1-1/16 ), 150 (1-1/2 ), 200 (2 ), 250 (2-1/2 ) Rod end male thread. With rubber bumper AT.IBD0- A New ompact ylinder Series N8 size: 06 (9/6 ), (/ ), 06 (-/6 ), (-/ ), ( ), 0 (-/ ) Standard type Actuation Style Built-in magnet Rod end male thread With rubber bumper size Standard stroke (inch)

More information

1010 GRAIN HEADER (P.I.N. JJC TO JJC ) ( -10/04) PICTORIAL INDEX, REEL DRIVE HYDRAULIC SYSTEM

1010 GRAIN HEADER (P.I.N. JJC TO JJC ) ( -10/04) PICTORIAL INDEX, REEL DRIVE HYDRAULIC SYSTEM 01-01 PICTORIAL INDEX, REEL DRIVE HYDRAULIC SYSTEM 01-01 PICTORIAL INDEX, REEL DRIVE HYDRAULIC SYSTEM 2 REF INSTRUCTION, Tube, See Figure 08-01 3 REF INSTRUCTION, Hose to combine, See Figure 08-01 4 REF

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

Iron Small Block - Technical Notes

Iron Small Block - Technical Notes DART Iron Small Block - Technical Notes Deck Height... 9.025" Bore... 4.00" or 4.125" unfinished Main Bearing Size... 350 (2.45") 400 (2.65") Weight... 205 lbs Largest Recommended Bore...... 4.185" Camshaft

More information

Pneu-Turn Rotary Actuators

Pneu-Turn Rotary Actuators Rotary Actuators Actuators Three-Position Engineering Specifications/ 4.3-4.15 4.16-4.18 4.19-4.22 Rotary Actuators TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE QUALITY FEATURES AT A LOWER COST:

More information

O-Ring Set Article category 9400 OR SET M. Other O-ring sizes available.

O-Ring Set Article category 9400 OR SET M. Other O-ring sizes available. OR SET O-Ring Set Article category 9400 Designation packing unit OR SET M OR SET M 90 SH 404 Stück 404 Stück Other O-ring sizes available. OR SET Z O-ring set, BSP between 2,3 mm and 28,17 mm 70 shore

More information

CONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9

CONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9 DIE ACCESSORIES CONTENTS page number Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

ITT Custom Products for Industrial Applications

ITT Custom Products for Industrial Applications CAP_Customs_Brochure:Layout 1 2/16/15 1:29 PM Page 1 ITT Custom Products for Industrial Applications Conoflow CAP_Customs_Brochure:Layout 1 2/16/15 1:29 PM Page 2 Custom Application Solutions are Our Specialty

More information

Maximum Pressure. High Pressure Technology Testing Equipment Hydraulics Pneumatics.» Valves Fittings Tubing Pressures to 217,000 psi (15,000 bar)

Maximum Pressure. High Pressure Technology Testing Equipment Hydraulics Pneumatics.» Valves Fittings Tubing Pressures to 217,000 psi (15,000 bar) Maximum Pressure. High Pressure Technology Testing Equipment Hydraulics Pneumatics» Valves Fittings Tubing Pressures to 217,000 psi (15,000 bar) 15,000 bar Valves, Fittings and Tubing MAXIMATOR has been

More information

Fixtures - Parts - Accessories to shampoo bowls

Fixtures - Parts - Accessories to shampoo bowls Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example,

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

Bi-Fold Closet Door Pin Assemblies. In Order by Pin Diameter & Height. Assembly # Pin w/cap Cap Tinnerman Clip

Bi-Fold Closet Door Pin Assemblies. In Order by Pin Diameter & Height. Assembly # Pin w/cap Cap Tinnerman Clip Bi-Fold Closet Door Pin Assemblies In Order by Pin Diameter & Height Closet Door Hardware 1/4" DIAMETER Assembly # 900-9421 Assembly # 1-250 Pin w/cap 1-243 Cap 4-119 Spring 5-51 Push Nut 6-122 Assembly

More information

Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19

Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19 Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR

More information

Technical Note PP 811-TN PE Flange Connections

Technical Note PP 811-TN PE Flange Connections Technical Note PP 811-TN PE Flange Connections Flange Connection Flanged joints are made using a DriscoPlex Flange Adapter that is fused to the pipe then joined to a mating flange adapter or a mating appurtenance

More information

Pump Mounting Hardware

Pump Mounting Hardware Pump Mounting Hardware provides a complete line of pump mounting hardware from clamps, wall brackets, covers, elevators and rams to a variety of stands and carts. So whether you need to mount your pump

More information

KTM Pneumatic Actuators AW, AWN series (for large sized valves)

KTM Pneumatic Actuators AW, AWN series (for large sized valves) Pneumatic actuator for large-sized valves, ideally suited for control valves and remotely controlling process lines Features Scotch yoke construction ideal for large sized valves Two pistons in double

More information

Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division

Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12

More information

13CD609G HP Lawn Tractor (2002) Page 1 of Inch Deck

13CD609G HP Lawn Tractor (2002) Page 1 of Inch Deck 13CD609G063 17.5HP Lawn Tractor (2002) Page 1 of 20 42 Inch Deck 13CD609G063 17.5HP Lawn Tractor (2002) Page 2 of 20 42 Inch Deck 1 16606 1 S Bracket: Retainer Hook 2 618-0565 1 S Spindle Assembly: Pulley

More information

Rectangular (RPS) Square (SPS) Step Cut (SCP) Material SCP - Step Cut CI - Cast Iron

Rectangular (RPS) Square (SPS) Step Cut (SCP) Material SCP - Step Cut CI - Cast Iron Ring Materials: Temp. Range 15% Glass filled PTFE -268 to 288 40% ronze filled PTFE -268 to 288 40% Glass Reinforced Nylon -240 to 149 15% Graphite Filled PTFE -72 to 232 15% Glass, 5% Moly Filled PTFE

More information

Air Tools. Production. Air Toggle Clamps. Accessories. Dimensions & Specifications. Collet Fixtures. Dimensions & Specifications.

Air Tools. Production. Air Toggle Clamps. Accessories. Dimensions & Specifications. Collet Fixtures. Dimensions & Specifications. Air Tools Air Toggle Clamps Accessories Air toggle clamps provide quick, automated clamping of work pieces in operations such as drilling, punching and forming. Air toggle clamps may also be plumbed for

More information

BULLETIN 43.00-2 FEBRUARY 2012. DeZURIK AWWA BUTTERFLY VALVES TECHNICAL SPECIFICATIONS

BULLETIN 43.00-2 FEBRUARY 2012. DeZURIK AWWA BUTTERFLY VALVES TECHNICAL SPECIFICATIONS BUETIN 43.00-2 FEBRUARY 2012 DeZURI AWWA BUTTERFY VAVES TECHNICA SPECIFICATIONS Materials of Construction 3 16" (80 400mm) 18 & 20" (450 & 500mm) A8 A6 A8 A7 A6 A1 A7 A1 A5 A4 A10 A2 A2 A5 A11 A3 A3 A12

More information

SPARE PARTS FOR CONSTRUCTION MACHINERY CONCRETE PUMPS, TRUCK MIXERS & BATCHING PLANTS

SPARE PARTS FOR CONSTRUCTION MACHINERY CONCRETE PUMPS, TRUCK MIXERS & BATCHING PLANTS components, accessories, spare parts for construction machineries SPARE PARTS FOR CONSTRUCTION MACHINERY CONCRETE PUMPS, TRUCK MIXERS & BATCHING PLANTS INTRODUCTION We are pleased to introduce our product

More information

CHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.

CHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A. CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle

More information

Screw Joints for HPLC

Screw Joints for HPLC Screw Joints for HPL 197 16 Easy handling, sturdy design and pressure resistance up to 30 bar: also in HPL applications OL Screw Joints are your first choice. PRODUT TIPS Page 198: 178 Distributors for

More information

Instruction Manual. L20 Agitators Air Motor Pressure Tank Motor Mix Tank Agitator Mix tank Agitator

Instruction Manual. L20 Agitators Air Motor Pressure Tank Motor Mix Tank Agitator Mix tank Agitator L20 Agitators 105450 Air Motor 105451 Pressure Tank Motor 105447 Mix Tank Agitator 105452 Mix tank Agitator Index Section 1.1 General Description 1.2 Operating Principle 1.3 Specification 2.1 Parts Lists

More information

PCC TechTorq. Rack and Pinion Actuators. A PCC Flow Technologies Company. Double Acting & Spring Return

PCC TechTorq. Rack and Pinion Actuators. A PCC Flow Technologies Company. Double Acting & Spring Return PCC TechTorq A PCC Flow Technologies Company Rack and Pinion Actuators Double Acting & Spring Return FEATURES precision engineered pistons with 4 wear pads blowout proof, onepiece drive shaft standard

More information

This 10-piece kit contains the front end parts pictured below. Sold only as a kit. Please call for more information or to place order.

This 10-piece kit contains the front end parts pictured below. Sold only as a kit. Please call for more information or to place order. 4-Shock Front Beam A 4-shock front beam made from 2-1/8 x.156 wall chromoly tubing with shock towers to accept 8 or 10 travel shocks. You can use stock trailing arms, sleeved trailing arms, or extra-long

More information

Hydraulic Jack Units. Contact Us! 888-577-EECO (3326) Delivery & Lead Times

Hydraulic Jack Units. Contact Us! 888-577-EECO (3326) Delivery & Lead Times Hydraulic Jack Units Elevator Equipment Corporation (EECO) has been manufacturing hydraulic elevator equipment since 1946, and is one of the leading suppliers in the industry for hydraulic jack units and

More information

Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT)

Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Price (excl VAT) Michelin Inner Tube, 3.00/3.25 x 17" 11.00 9.17 Michelin Inner Tube, 3.25/3.50/4.10 x 18" 13.00 10.83 Michelin Inner

More information

*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.

*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...

More information

Rear brake - drum brake, servicing

Rear brake - drum brake, servicing Page 1 / 9 46-2 Rear brake - drum brake, servicing Rear brake, removing and installing Grease cap Removing and installing 42-3, Pressing off grease cap Pin Replace Castle nut Hex nut Page 2 / 9 Adjusting

More information

Hydraulic Pressure Control Valves

Hydraulic Pressure Control Valves Webtec Products Limited Hydraulic Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. RV 020 Direct In-Line Relief Valve 1 RV 025 Relief Valve 3 RV 050 Relief

More information

Complete Dorman Assortment Summary Chart by Product

Complete Dorman Assortment Summary Chart by Product Complete Dorman Assortment Summary Chart by Product What & how to best stock each product line based on your hardware coverage goal Parts Store Stock Installer/Dealer-Pak Drawers Tech Tray/Value Pack YOUR

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

POPPET BLOCK CONTROL

POPPET BLOCK CONTROL POPPET BLOCK CONTROL MAINTENANCE AND SERVICE MANUAL USASI SCHEMATIC Normally closed, double three-way poppet valve, with open exhaust, manual and pilot actuated. POPPET BLOCK GAS OR OIL FLOW INTRODUCTION

More information

TIMKEN BEARING CONVERSION TOOL

TIMKEN BEARING CONVERSION TOOL -J067 REV. 008-07- TIMKEN BEARING CONVERSION TOOL GENERAL Kit Number 8-08 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com

More information

Hydraulic & Mechanical Power. SC106 Product Catalog. A Century of Product Integrity

Hydraulic & Mechanical Power. SC106 Product Catalog. A Century of Product Integrity SC106 Product Catalog A Century of Product Integrity Hydraulic & Mechanical Power cylinders hand pumps mechanical accessories power pumps lifting jacks hydraulic tools bolting presses TABLE OF CONTENTS

More information

Seals. Use Genuine Dexter replacement parts.

Seals. Use Genuine Dexter replacement parts. Seals K71302Seal K71-301-00 Seal Fits Dexter 10 x 1-1/2" hub. 1.75 ID x 2.33 OD. Fits Dexter 7" hub. 1.50 ID x 1.987 OD. K71-303-00 Seal K71-304-00 Seal Fits Dexter 10 x 2-1/4" hub. 1.72 ID x 2.565 OD.

More information

I-Line. Accessories. Essential cable installation products for corrugated, smooth wall, and braided cables

I-Line. Accessories. Essential cable installation products for corrugated, smooth wall, and braided cables I-Line TM Essential cable installation products for corrugated, smooth wall, and braided cables Installation Coaxial cable installation components for corrugated, smooth wall and braided cables Proven

More information

RING JOINT SYSTEMS 207

RING JOINT SYSTEMS 207 RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

MUELLER A-20806/A ADJUSTABLE VERTICAL INDICATOR POST

MUELLER A-20806/A ADJUSTABLE VERTICAL INDICATOR POST INSTALLATION INSTRUCTIONS MUELLER A-20806/A-20807 STARTING YEAR DATE 2011 GENERAL DESCRIPTION Vertical Indicator Posts (Ref. Figure A) are designed to operate non-rising stem (inside screw) gate valves,

More information

TC 170 & TC 170 PD TRANSFER CASE

TC 170 & TC 170 PD TRANSFER CASE Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS

More information

*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US

*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...

More information

DOUBLE GATE KNIFE GATE VALVE

DOUBLE GATE KNIFE GATE VALVE DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or

More information

Piston Rings. Product Description: Part Numbers: Piston Rings. Imperial Seals. Rectangular (RPS) Square (SPS) Step Cut (SCP)

Piston Rings. Product Description: Part Numbers: Piston Rings. Imperial Seals. Rectangular (RPS) Square (SPS) Step Cut (SCP) Ring Materials: Temp. Range 15% Glass filled PTFE -268 to 288 40% ronze filled PTFE -268 to 288 15% Graphite filled PTFE -268 to 121 15% Glass, 5% Moly filled PTFE -268 to 288 25% arbon Graphite filled

More information

HT3 series Peck Feed Drills, with Equal Drill Time

HT3 series Peck Feed Drills, with Equal Drill Time Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female

More information

SAE J429 GRADE IDENTIFICATION

SAE J429 GRADE IDENTIFICATION NUCOR FASTENER CAP SCREWS TECHNICAL DATA SHEET Nucor Fastener is one of the largest manufacturers of Hex Head Cap Screws in the U.S.A. Cap Screws have been a serious business to us since we made our first

More information