2 and 2-1/2 have 3/8 NPT Ports

Size: px
Start display at page:

Download "2 and 2-1/2 have 3/8 NPT Ports"

Transcription

1 LION HYDRAULIC TIE-ROD CYLINDERS M1 Double Ported NPFT Inline Ports 2 and 2-1/2 have 3/8 NPT Ports These top 10 cylinders listed are all ASAE Rest have 1/2 NPT ports The remainder of the cylinders are all NON-ASAE LH SERIES 3000 PSI WX SERIES 3000 PSI Size Size Inches Pin to Pin Our Inches Pin to Pin Our Bore & Rod Center Cylinder Sequence Per Bore & Rod Center Cylinder Sequence Per Stroke Wt. Diam. Retracted Number Number Each Stroke Diam. Retracted Number Number Each 2 x /4 20LH $ /2 x WX $ /2 x /4 25LH /2 x WX x /4 30LH /2 x WX /2 x /4 35LH /2 x WX x /4 40LH x WX x /4 50LH x WX x /2 30LH x WX /2 x /2 35LH x WX x /2 40LH x WX x /2 50LH x WX /2 x WX x /4 20LH /2 x WX x /4 20LH /2 x WX x /4 20LH /2 x WX x /4 20LH /2 x WX x /4 20LH x WX x /4 20LH x WX x /4 20LH x WX x /4 20LH x WX x /4 20LH x WX /2 x /4 25LH /2 x /4 25LH /2 x /4 25LH /2 x /4 25LH /2 x /4 25LH /2 x /4 25LH /2 x /4 25LH x /4 30LH x /4 30LH x /4 30LH x /4 30LH x /4 30LH x /4 30LH x /4 30LH x /4 30LH x /4 30LH /2 x /4 35LH /2 x /4 35LH /2 x /4 35LH /2 x /4 35LH /2 x /4 35LH /2 x /4 35LH /2 x /4 35LH /2 x /4 35LH /2 x /4 35LH /4 x /4 47TP $No Match! 4 x /4 40LH x /4 40LH piece minimum order on all other size of rephasing cylinders. 4 x /4 40LH x /4 40LH x /4 40LH x /4 40LH x /4 40LH x /4 40LH Bore Rod Kit No. Seq. No. Each 4 x /4 40LH $ x /4 40LH / x /4 50LH / x /4 50LH x /4 50LH x /4 50LH / x /4 50LH / x /4 50LH x /4 50LH x /4 50LH x /4 50LH Our Kit Bore Rod Sequence Per Rod Piston Rod Number Size Diam. Number Each Wiper Seal Seal TL G08400 $13.27 MC OR2B USL TL G MC OR2B USL TL G MC OR2B USL SEAL KITS FOR TIE ROD CYLINDERS Model Number Example 20 LH Bore (inches) x.1 LH 3000 PSI Stroke (inches) Rod Diameter (inches) x.01 REPHASING TYPE (WITHOUT STROKE CONTROL) Size Inches Pin to Pin Our Bore & Rod Center Cylinder Sequence Per Stroke Diam. Retracted Number Number Each SEAL KITS for LH SERIES CYLINDERS To calculate extended pin to pin center add stroke to retracted dimension All cylinders have 1 pin diam. except ASAE LH16 s which are 1-1/4 Our Kit Bore Rod Sequence Per Rod Piston Rod Number Size Diam. Number Each Wiper Seal Seal TL G08412 $15.56 MC OR2B USL TL G MC OR2B USL

2 M2 PRINCE HYDRAULIC CYLINDERS PRINCE 16, except 33616, 10716, 10816, 5416, 8316, 5516, and 5616 are 31-1/2 centers ASAE standard length. PRINCE 33616, 10716, and cylinders are 26-1/4 centers short length. Recommended Implement Minimum Bore 2 bottom plow bottom plow bottom plow...3-1/2 5 bottom plow disk disk disk...3-1/2 10 chisel chisel...3-1/2 16 chisel one-way one-way...3-1/2 PRINCE - Tie Rod Type 15 one-way...4 3/4 O-Ring Ports & Chromed piston rod will operate at full pressure through 16 stroke. For longer than 16 stroke, check with Prince engineering department. 1 Clevis Pins; except, 9708, 9716, 9724 have 1-1/4 Clevis Pins & 5 have 7/8 O-Ring Ports & 1-1/4 Clevis Pins Max. Pressure PSI TIE ROD TYPE Distance Inches Size Center to Inches Center Prince Bore Clevis Pins Tie-Rod Shaft Our x Cylinder Wt.. Cylinder Diam. Sequence Per Stroke Retracted Lbs. Number Inches Number Each 2 x /2 18 B200040ABAAA07B $ x /4 19 B200060ABAAA07B x /4 20 A200080ABAAA07B 1-1/ x /4 21 B200100ABAAA07B 1-1/ x /4 25 B200120ABAAA07B 1-1/ x /4 26 B200140ABAAA07B 1-1/ x /2 28 A200160ABAAA07B 1-1/ x /4 29 B200180ABAAA07B 1-1/ x /4 31 B200200ABAAA07B 1-1/ x /4 35 B200240ABAAA07B 1-1/ x /4 39 B200300ABAAA07B 1-1/ /2 x /4 22 B250060ABAAA07B 1-1/ /2 x /4 25 A250080ABAAA07B 1-1/ /2x /4 26 B250100ABAAA07B 1-1/ /2x /4 27 B250120ABAAA07B 1-1/ /2x /4 29 B250140ABAAA07B 1-1/ /2x /2 33 A250160ABAAA07B 1-1/ /2x /4 34 B250180ABAAA07B 1-1/ /2x /4 36 B250200ABAAA07B 1-1/ /2x /4 39 B250240ABAAA07B 1-1/ /2x /4 44 B250300ABAAA07B 1-1/ x /4 24 B300060ABAAA07B 1-3/ x /4 29 A300080ABAAA07B 1-3/ x /4 32 B300100ABAAA07B 1-3/ x /4 33 B300120ABAAA07B 1-3/ x /4 35 B300140ABAAA07B 1-3/ x /2 39 A300160ABAAA07B 1-3/ x /4 29 B300160ABAAA07B 1-3/ x /4 42 B300180ABAAA07B 1-3/ x /4 45 B300200ABAAA07B 1-3/ x /4 47 B300240ABAAA07B 1-3/ x /4 63 B300300ABAAA07B 1-3/ x /2 61 B300360ABAAA07B 1-3/ x /4 66 B300480ABAAA07B 1-3/ /2x8 20-1/4 31 A350080ABAAA07B 1-3/ /2x /4 36 B350100ABAAA07B 1-3/ /2x /4 38 B350120ABAAA07B 1-3/

3 PRINCE HYDRAULIC CYLINDERS - Continued M3 Chromed piston rod will operate at full pressure through 16 stroke. For longer than 16 stroke, check with Prince engineering department. Max. Pressure PSI Max. Pressure PSI TIE ROD TYPE TIE ROD TYPE Distance Inches Size Center to Inches Center Prince Bore Clevis Pins Tie-Rod Shaft Our x Cylinder Wt. Cylinder Diam. Sequence Per Stroke Retracted Lbs. Number Inches Number Each 3-1/2x /4 41 B350140ABAAA07B 1-3/ $ /2x /2 46 A350160ABAAA07B 1-3/ /2x /4 33 B350160ABAAA07B 1-3/ /2x /4 47 B350180ABAAA07B 1-3/ /2x /4 49 B350200ABAAA07B 1-3/ /2x /4 54 B350240ABAAA07B 1-3/ /2x /4 64 B350300ABAAA07B 1-3/ /2x /4 66 B350360ABAAA07B 1-3/ /2x /4 73 B350480ABAAA07B 1-3/ x /4 45 A400080ABAAA07B 1-3/ x /4 48 C400080ABDDA03B x /4 48 B400100ABAAA07B 1-3/ x /4 49 B400120ABAAA07B 1-3/ x /4 51 B400140ABAAA07B 1-3/ x /2 61 A400160ABACA07B 1-3/ x /4 48 B400160ABACA07B 1-3/ x /2 64 C400160ABDDA07B x /4 62 B400180ABACA07B 1-3/ x /4 72 B400200ABACA07B 1-3/ x /4 74 B400240ABACA07B 1-3/ x /4 77 C400240ABDDA03B x /4 77 B400300ABACA07B 1-3/ x /4 83 B400360ABACA07B 1-3/ x /4 109 B400480ABACA07B 1-3/ x /4 67 B500080ACDDA07B x /4 75 B500120ACDDA07B x /4 80 B500140ACDDA07B x /2 84 A500160ACDDA07B x /4 90 B500180ACDDA07B x /4 95 B500200ACDDA07B x /4 104 B500240ACDDA07B x /4 108 B500300ACDDA07B x /4 118 B500360ACDDA07B x /4 161 B500480ACDDA07B PRINCE Welded Type Crosstube & Pinhole Max. Pressure 2500 PSI 2-1/2-3/8 Ports & 3/4 Pinholes 3 & 3-1/2-1/2 Ports & 1 Pinholes 4-1/2 Ports & 1-1/4 Pinholes CROSS TUBE SAME LENGTH AS ROD O.D. Max. Pressure PSI Max. Pressure PSI WELDED TYPE WELDED TYPE Prince Retracted Prince Retracted Size Welded Pinhole Size Welded Pinhole Inches Cross- to Inches Cross- to Bore tube Pinhole Shaft Our Bore tube Pinhole Shaft Our x Wt. Cylinder Dist. Diam. Sequence Per x Wt. Cylinder Dist. Diam. Sequence Per Stroke Lbs. Number Inches Inches Number Each Stroke Lbs. Number Inches Inches Number Each 2-1/2 x / $ /2x / $ /2x / /2x / /2x / /2x / /2x / /2x / /2x / /2x / /2x / /2x / /2x / /2x / /2x / /2x / /2x / /2x / x / x x / x x / x x / x x / x x / x x / x x / x x / x x / x x / x /2x / x /2x /

4 M4 MAKE A CYLINDER 3000 PSI FEATURES: Honed tubing Chromed, ground and polished rod Ductile iron piston and gland Optional end fittings available Urethane u-cup and wiper on shaft Crown seal standard on piston Mylar wear ring on piston Gland is threaded Gloss black color 3000 PSI threaded gland Make your own Cylinder with weld-on accessories shown on this page BASE and ROD END FEMALE CLEVIS - WELD-ON D=.760 Pinhole G = 1-3/4 Model Part Our Sequence Per Number K L M N Number Number Each F150, F /8 1-1/2 7/8 3/ $29.07 SEAL KITS FOR MAKE A CYLINDERS Cylinder Seal Kit Our Sequence Per Bore Inches Number Number Each 1-1/2 PMCK-F150C $ /4 PMCK-F175C PMCK-F200C /4 PMCK-F225C /2 PMCK-F250C /4 PMCK-F275C FITTINGS & ADAPTERS Anchor Our Sequence Per Description Part Number Number Each SAFJFP 9/16 JIC F x 1/4 F Pipe 4F-6JUFS $5.71 9/16 JIC F x 3/8 F Pipe 6F-6JUFS /16 JIC F x 1/2 F Pipe 8F-6JUFS Yankee SYFJFP 9/16 JIC F x 3/8 F Pipe Baum 90 Swivel SEMJFJP 9/16JICM x 9/16JICF MAKE A CYLINDER 3000 PSI Cylinder has 9/16 JIC 37º flare male Straight ports on both ends Size Inches Bore & Closed Rod Angle Crosstube Cylinder Our Sequence Per Stroke Wt. B Diam. C E F Number Number Each 1-1/2x /2 3/ /4 F150160CSSTNN $ /2x /2 3/ /4 F150200CSSTNN /4x /2 1-1/ /4 F275100CSSTNN /4x /2 1-1/ /4 F275300CSSTNN SEAL KITS FOR GLAND END CYLINDERS - Listed on Page M7 Cylinder Seal Kit Our Sequence Per Cylinder Seal Kit Our Sequence Per Bore Inches Part Number Number Each Bore Inches Part Number Number Each 2 SK EE2260 $ /2 SK EE $6.32 2* SK-1D EE /2* SK-1D EE Hvy SK EE * SK-1D EE /2* SK-1D EE SK EE /2 SK EE * SK-1D EE /2 SK EE SK EE SK EE SK EE * SK-1D EE SK-1D EE SK EE SK EE * SK-1D EE SK-1D EE /2 SK EE SK EE /2* SK-1D EE * Fits Cross Cylinders

5 PRINCE MASTER - SLAVE CYLINDERS M5 REPHASING TYPE CYLINDERS (WITHOUT STROKE CONTROL) 1 CLEVIS PINS ARE INCLUDED WITH EACH CYLINDER. 8 STROKE 12 STROKE 16 STROKE RETRACTED LENGTH RETRACTED LENGTH RETRACTED LENGTH 20-1/4 PIN-TO-PIN 24-1/4 PIN-TO-PIN 28-1/4 PIN-TO-PIN Cylinder Rod Part Our Sequence Per Part Our Sequence Per Part Our Sequence Per Bore Diameter Number Number Each Number Number Each Number Number Each 5 1-1/2 AM $ AM $ AM $ /4 1-1/2 AM AM AM /2 2 AM AM AM /8 AM-2550A AM-2552A AM-2554A /4 1-3/8 AM-2556A AM-2558A AM-2560A /2 1-1/4 AM AM AM /4 1-1/4 AM AM AM /4 AM AM AM Lion Rephasing cylinders on page M1 PRINCE STROKE CONTROL ASSEMBLIES PRINCE STROKE CONTROL VALVE THREE-SLEEVE STROKE CONTROL ASSEMBLY Practical, efficient and easily adapted to Prince Standard Series Cylinders. Positive stroke control adjustment. Open 5-5/8 Closed 2-1/2 PMSC-1 Adapting Sleeve Thread size 1-14 and will accept shaft size thru 1-1/8 diameter. Will fit model: PMSC-8 Adapting Sleeve Thread size 1-1/8-12 and will accept shaft size thru 1-3/8 diameter. Will fit models: 9108, 9208, 9308A, 7008, 7108, 7208A, 9208, 9008, 32008, 32508, 33008, 33508, 42008, 42508, & TWO-SLEEVE STROKE CONTROL ASSEMBLY Open 3-1/2 Closed 2-5/16 PMSC-3 Adapting Sleeve Thread size 1-1/2-12 and will accept 1-1/2 shaft size. Will fit models: 8608 and Part Thread Wt. Our Sequence Per Number Size Lbs. Number Each PMSC $98.98 PMSC-3 1-1/ PMSC-8 1-1/ PMSC / CONCERNING CYLINDER WARRANTY If you have a cylinder warranty question or a possible defective part, please call us first! Depending on which part is defective and which manufacturer, each situation is handled differently. Generally the complete cylinder will have to be inspected by factory engineers. Again, please call first. NOTE: Misalignment or binding causes most cylinder shafts to bend or break, therefore cylinder manufacturers do not warranty their shafts. Number For Our Sequence # Per Each PM-SC-10 3/4 O-Ring $93.88 NEW WHOA ALUMINUM STROKE CONTROL SEGMENTS 98 & 99 have 7/8, 1, 1-1/4, & 1-1/2 inch Segments 96 & 97 have 1, 1-1/2, 2, & 4-1/4 inch Segments Number Shaft Size Wt. Lbs. Our Sequence # Per Each 98/99 1-1/8 thru 1-1/2 1-1/ $ /97 1-3/4 thru PRINCE WELDED CYLINDER Max. Pressure PSI 3/4 Work Ports All with 1-1/2 Pinholes Size Prince Overall Inches Weld-A- Shaft Length Our Bore x Wt. Cylinder Diam. Retracted Sequence Per Stroke Lbs. Number Inches Inches Number Each 5 x / $ x / x / x / x / x / x x x x x x

6 M6 REPAIR PARTS FOR CROSS and PRINCE BASE END OR BUTT END FOR TIE-ROD CYLINDERS Over Tie-Rod E PIPE THREAD ORING THREAD Cylinder Square All C W Hole Clevis Bolt Pin Base End Our Base End Our Bore Size Lgth. Throat Throat *** Ear Center Hole Part Pipe Sequence Per Part O-Ring Sequence Per Inches Inches Inches Depth Width Diam. Inches Inches Inches Number Port Number Each Number Port Number Each 2* /8D D / $ SF 3/ $ Hvy 3-3/ /2T / / /2 3-3/ /2T / SF 3/ * 3-7/ /2D D / / /2T / SF 3/ * 3-7/ /2T D / /2* 4-3/ /16D D / /2 4-1/ /2T / SF 3/ /2* 4-3/ /16D D / * /8D D / /16 5/8T / SF 3/ * /8D D / * 5-3/ /2D / / * 5-3/ /4D D / * 5-3/ *** D= Drilled T= Tapped /4D D / ** Prince has 2 same thread ports 90 o offset from each other ** Cross has 1 port 90 o offset from pinhole TIE-ROD GLAND OR HEAD END FOR TIE-ROD CYLINDERS Oring Thread TIE-ROD CYLINDERS also available in 3000 PSI Cylinder Rod Square Bolt PIPE THREAD Our ORING THREAD Our Bore Diam. Size Width Tube Port Center Part Pipe Sequence Per Base End Sequence Per Inches Inches Inches Inches Locate Locate Inches Number Port Number Each Part Number O-Ring Port Number Each /8 2-1/4 1/ / $ / $ * 1-1/ /8 1/ D / Hvy 1-1/8 3-3/8 2-3/8 1/ / / /2* 1-1/16 3-3/ D / /2 1-1/8 3-3/8 2-3/8 1/ / / /2 1-1/4 3-3/8 2-3/ / / /8 3-7/8 1-15/16 1/ / / * 1-1/4 3-7/ D / /8 3-7/8 1-15/16 1/ / / * 1-1/2 3-7/ D / /2 1-1/8 4-1/4 1-13/16 1/ / / /2* 1-1/4 4-3/ D / /2 1-3/8 4-1/4 1-13/16 1/ / / /2* 1-1/2 4-3/ D / * 1-1/ D / / /16 5/ / / * 1-1/ /16 5/ D / / / /16 5/ / / * 1-1/ D / /4 5-3/ / * / D / /4 2-1/2 9/16 1-5/ / / Seal kits listed on page M4 PISTONS FOR CYLINDERS Cylinder Piston Our Piston Bore Inner Width Inset Part Sequence Piston Seal Kit Our Sequence Seal Kit Inches Diam.Ins. Inches Inches Number Number Each Part Number Number Each 2* 3/4 1 3/8 1D $22.54 SK-1D EE2120 $ / SK EE /2* 3/4 1 3/8 1D SK-1D EE /2 3/ SK EE * 3/4 1 3/8 1D SK-1D EE / SK EE /2 3/ SK EE /2 7/ SK EE /2* 1 1 3/8 1D SK-1D EE * 1 1 3/8 1D SK-1D EE / SK EE * 1-1/4 1-3/4 3/4 1D SK- 1D EE /4 1-1/ SK EE * Fits Cross Tie-Rod Cylinders PROMPT WAREHOUSE SERVICE PRICES SUBJECT TO CHANGE WITHOUT NOTICE BAUM SNOW PLOW CYLINDERS Single-Acting Displacement Cylinders with Pinhole in Shaft & Butt End E = 1/4 Female Pipe B Pin D H-J A Center to Butt F Fit G Cylinder Bore C Our Port Shaft Center End Outside Pin Collar Uses Our Part Size Stroke Sequence Per Size Size Collapsed Diam. Diam. Size Size Seal Kit Sequence Per Number Inches Inches Number Each Inches Inches Inches Inches Inches Inches Inches Number Number Each CS /2 x $ /4 1-1/ /4 2 3/4 2-3/ G08555 $11.04 CS /2 x /4 1-1/ / / G CS x / /4 2-1/ / CS x / /4 2-1/4 2-1/ / CS /2 x /8 2-1/ / / CS x / /4 3-1/ CS x / /4 3-1/ All plows but Meyer take 1 Pin. Use 5/8 x 1 Bronze Bushing to reduce bore for Meyer.

7 SHAFTS FOR CROSS AND RUGBY TIE-ROD CYLINDERS M7 Cross For P i s t o n Clevis Part Shaft Cylinder End End Length Our Sequence Per Number Diam. Diameter Diam., Thd. Diam., Thd. Inches Number Each 1D /16 2 & 2-1/2 x 8 DB 3/ / / $ D /4 3 x 8 DB 3/ / / D /4 4 x 8 DB / / D /2 5 x 8 DB 1-1/ / / D / with & without stop / / D /4 308 with & without stop 3/ / / D /4 408 with & without stop / / SHAFT CLEVIS FOR CROSS CYLINDERS CYLINDER CLEVIS PINS Choose your clevis by the thread size and pinhole diameter. All clevis here are the split type and made of ductile iron. Clearance Overall Throat Clevis Our Thread Pinhole Between Width Clearance Part Sequence Per Clevis Pin Size-Diam. & Fits Cylinder Our Sequence Per Size Diameter Ears Inches Inches Number Number Each Part Number Useable Lgth. Size Number Each 1-1/ D $ C w/o hole 1 x 2-1/8 2 thru 3-1/ $ / D C w/o hole 1 x 2-3/4 2 thru 3-1/ / / D X Replacement Clip for Above Clevis Pins SEAL KITS FOR CROSS & LANTEX TIE-ROD CYLINDERS Specify Bore, Diameter, Stroke, Shaft Size & whether depth control, or standard double-acting. Each seal kit consists of: 3 piston and static seals, 2 shaft seals, 1 piston gasket and 1 wiper. DA/DB = Double Acting Tie Rod DC = Hyd. Depth Control DR = Rephasing Cylinder DE = Mechanical Deplth Control DCR = Hyd. Depth Control for Rephasing Cylinder Part Shaft Cylinder Our Sequence Per Number Diam. Diameter Number Each 1C4642 3/4 1-1/2 DB EE1815 $ C /16 2 DA EE C /8 2 DB EE C /16 2-1/2 DA EE C /8 2-1/2 DB EE C /4 2-1/2 DB EE C /16 3 DB EE C /8 3 DB EE C /2 3 DB EE C /4 3 DB & DE EE C /4 3 DR & DCR EE C /4 3 DC EE C /4 3-1/4 DR EE C /4 3-1/2 DR & DCR EE C /4 3-1/2 DB & DE EE C /2 3-1/2 DA EE C /4 3-1/2 DC EE C /2 3-1/2 DC EE C /4 3-1/2 DC EE C /8 3-3/4 DR EE C /4 4 DB & DE EE C /2 4 DB & DE EE C /2 4 DC EE C DB EE C /4 4 DC EE C /4 4 DC EE C /8 4 DR & DCR EE C DC EE C /8 4-1/4 DR EE C /2 4-1/2 DR & DCR EE C /2 4-1/2 DC EE C /4 4-1/2 DC EE C /2 DC EE C /2 4-3/4 DR EE C /2 5 DB EE C /2 5 DC EE C /4 5 DC EE C /2 5 DR & DCR EE C DB EE C DC EE C7810 DC POPPET ASSEMBLY EE TOP LINK CYLINDER Catagory II only 1 Swivel Pinhole 1/2 NPT Ports Size Prince Overall Inches Weld-A- Shaft Length Our Bore x Cylinder Diam. Retracted Sequence Per Stroke PSI Number Inches Inches Number Each 3 x BD /8 20-7/ $ Part Shaft Cylinder Our Sequence Per Number Diam. Diameter Number Each ROD WIPER ONLY FOR CROSS AR0913-E0 3/ $4.63 AR1491-E0 1-1/ AR1598-E0 1-1/ AR1818-F0 1-1/ AR2269-F0 1-1/ AR6868-E0 1-3/ AR2912-F SEAL KITS FOR LANTEX TIE-ROD CYLINDERS Part Shaft Cylinder Our Sequence Per Number Diam. Diameter Number Each /8 2 EE2130 $ /8 2-1/2 EE /4 2-1/2 EE /4 3 EE /2 3 EE /4 3-1/2 EE /2 3-1/2 EE /2 4 EE /4 4 EE /4 5 EE SEAL KITS FOR MONARCH RED LION TIE-ROD CYLINDERS MADE IN CANADA Kit Bore Rod Our Sequence Per Rod Piston Rod Number Size Diam. Number Each Wiper Seal Seal G08300 $10.86 MC OR2B OR1B G MC OR2B OR1B G MC OR2B OR1B G MC OR2B OR1B G MC OR2B OR1B G MC OR2B OR1B G MC OR2B OR1B G MC OR2B OR1B G MC OR2B OR1B G MC OR2B OR1B G MC OR2B OR1B SAME DAY SHIPMENT PHONE, FAX, OR MAIL YOUR ORDER TODAY Call our hydraulic technicians for all your hydraulic needs. Our toll free numbers are listed on the front of the catalog.

8 M8 SHAFTS FOR PRINCE TIE-ROD CYLINDERS Prince For Piston Clevis Part Shaft Cylinder End End Length Our Sequence Per Number Diam. Diameter Diam., Thd. Diam., Thd. Inches Number Each x 8 3/ / $ /8 2-1/2 x 8, 3 x 8, 3-1/2 x 8 3/ / / A 3 x A 1-3/8 3 x 24 3/ / / /2 4 x / / SHAFT CLEVIS FOR PRINCE CYLINDERS Choose your clevis by the thread size and pinhole diameter. All clevis here are the split type and made of ductile iron. C W T Clearance Overall Throat Clevis Thread Pinhole Between Width Clearance Part Our Sequence Per Size Diameter Ears Inches Inches Number Number Each 7/ $ / / / / CYLINDER CLEVIS PINS Less Clips Clevis Pin Size Diam. & Fits Cylinder Our Sequence Per Use Our Sequence Per Part Number Useable Length Size Number Each Clip Number Number Each x 3-3/16 4, 5 bushed $ X $ /4 x 3-3/16 5 cylinder SEAL KITS FOR PRINCE TIE-ROD & WELDED CYLINDERS Specify Bore, Diameter, Stroke, Shaft Size & whether standard double-acting (DA) or single-acting (SA). Each seal kit contains a complete set of back-up washers, O-Rings and wiper. Part Shaft Cylinder Cylinder Our Sequence Per Number Diam. Diam. Style Number Each PMCK Welded EE22464 $24.08 PMCK /8 2-1/2 Welded EE PMCK /8 3 Welded EE PMCK /2 3-1/2 Welded EE PMCK /2 3 Welded EE PMCK Welded EE PMCK /8 2-1/2 Tie-Rod EE PMCK /8 3 Tie-Rod EE PMCK /8 3-1/2 Tie-Rod EE PMCK Tie-Rod EE PMCK /2 4 Tie-Rod EE PMCK /8 2 Tie-Rod EE PMCK /4 2-1/2 Tie-Rod EE PMCK /8 3 Tie-Rod EE PMCK /8 3-1/2 Tie-Rod EE PMCK /4 4 Tie-Rod EE PMCK /4 5 Tie-Rod EE PMCK Tie-Rod EE PMCK Tie-Rod EE PMCK /2 5 Tie-Rod EE PMCK /8 4 Tie-Rod EE PMCK /2 4 Hyd-Stop EE PMCK /4 4 Hyd-Stop EE PMCK /4 3 Hyd-Stop EE PMCK /8 3 Hyd-Stop EE PMCK /4 3-1/2 Hyd-Stop EE PMCK /2 3-1/2 Hyd-Stop EE PMCK /4 1-1/2 Welded EE PMCK /8 2 Welded EE PMCK /4 2-1/2 Welded EE PMCK /8 3 Welded EE PMCK /2 3-1/2 Welded EE PMCK /4 4 Welded EE PMCK /2 5 Hvy Weld EE PMCK Hvy Weld EE PMCK /8 2 Welded PMCK /4 2-1/2 Welded PMCK /8 3 Welded PMCK /2 3-1/2 Welded PMCK /4 4 Welded SEAL KITS FOR PRINCE 3000 PSI SAE TIE-ROD CYLINDERS PMCK /8 2 Tie-Rod EE PMCK /4 2-1/2 Tie-Rod EE PMCK /8 3 Tie-Rod EE PMCK /8 3-1/2 Tie-Rod EE PMCK /4 4 Tie-Rod EE PMCK Tie-Rod EE PRINCE HYDRAULIC STOP POPPET VALVE ASSEMBLY Hydraulic Stop Cylinder $81.18 CLIPS FOR CLEVIS PINS Part Shaft Cylinder Cylinder Our Sequence Per Number Diam. Diam. Style Number Each SEAL KITS FOR PRINCE TIE-ROD SLAVE CYLINDERS PMCK-AM /2 5 Tie-Rod $ PMCK-AM /2 5 Tie-Rod PMCK-AM /2 5 Tie-Rod PMCK-AM /2 4-3/4 Tie-Rod PMCK-AM /2 4-3/4 Tie-Rod PMCK-AM /2 4-3/4 Tie-Rod PMCK-AM /2 Tie-Rod PMCK-AM /2 Tie-Rod PMCK-AM /2 Tie-Rod PMCK-AM /8 4 Tie-Rod PMCK-AM /8 4 Tie-Rod PMCK-AM /8 4 Tie-Rod PMCK-AM /8 3-3/4 Tie-Rod PMCK-AM /8 3-3/4 Tie-Rod PMCK-AM /8 3-3/4 Tie-Rod PMCK-AM /4 3-1/2 Tie-Rod PMCK-AM /4 3-1/2 Tie-Rod PMCK-AM /4 3-1/2 Tie-Rod PMCK-AM /4 3-1/4 Tie-Rod PMCK-AM /4 3-1/4 Tie-Rod PMCK-AM /4 3-1/4 Tie-Rod PMCK-AM /4 3 Tie-Rod PMCK-AM /4 3 Tie-Rod PMCK-AM /4 3 Tie-Rod SEAL KITS FOR PRINCE TIE-ROD MASTER CYLINDERS with STROKE CONTROL PMCK-AM /2 5 Tie-Rod PMCK-AM /2 5 Tie-Rod PMCK-AM /2 5 Tie-Rod PMCK-AM /2 4-1/4 Tie-Rod PMCK-AM /2 4-1/4 Tie-Rod PMCK-AM /2 4-1/4 Tie-Rod PMCK-AM /8 4 Tie-Rod PMCK-AM /8 4 Tie-Rod PMCK-AM /8 4 Tie-Rod PMCK-AM /4 3-1/2 Tie-Rod PMCK-AM /4 3-1/2 Tie-Rod PMCK-AM /4 3-1/2 Tie-Rod SEAL KITS FOR NEW PRINCE 3,000 PSI TIE-ROD CYLINDERS PMCK-B /8 2 3,000 Tie-Rod PMCK-B /4 2-1/2 3,000 Tie-Rod PMCK-B /8 3 3,000 Tie-Rod PMCK-B /8 3-1/2 3,000 Tie-Rod PMCK-B /4 4 3,000 Tie-Rod PMCK-B ,000 Tie-Rod

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies

Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date

More information

HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455

HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455 HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1

More information

HT3 series Peck Feed Drills, with Equal Drill Time

HT3 series Peck Feed Drills, with Equal Drill Time Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female

More information

CHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.

CHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A. CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle

More information

Hose Clamps & Fittings

Hose Clamps & Fittings All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw

More information

PVH131/141 Variable Displacement Piston Pump - 11 Design

PVH131/141 Variable Displacement Piston Pump - 11 Design Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque

More information

COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN

COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN SERIES MECHANICAL SWEEPERS pn GS328985 REV B MAY 2012 COPYRIGHT 2012 GLOBAL ENVIRONMENTAL PRODUCTS, INC. ALL RIGHTS RESERVED REV B MAY 2012 Page 2 Common

More information

These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:

These features have made Lo Torc valves the choice of high pressure plug value users, worldwide: LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have

More information

Copper Meter Resetters

Copper Meter Resetters Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710

More information

PVM Piston Pumps Service Manual

PVM Piston Pumps Service Manual PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...

More information

IF IT FLOWS THE BOWIE PUMP CAN PUMP IT

IF IT FLOWS THE BOWIE PUMP CAN PUMP IT IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series

More information

POWERS Controls No. 4 Pneumatic Damper Actuator

POWERS Controls No. 4 Pneumatic Damper Actuator POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000

More information

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner

More information

Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8

Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8 * U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned

More information

SELF-STEERING AXLE TABLE OF CONTENTS

SELF-STEERING AXLE TABLE OF CONTENTS SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -

More information

TAMPERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.

TAMPERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A. TAMPERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1064 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Check the tamping butt lock screw, it must be tightened

More information

Slide the new steering column shaft through the steering column from the driver compartment.

Slide the new steering column shaft through the steering column from the driver compartment. Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.

More information

GRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A.

GRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A. GRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A. FORM NO. 79023737A JULY, 2005 1 FORWARD ALPHABETICAL INDEX The complete alphabetical index appears at the

More information

Mueller B-101 and A-3 Drilling and Tapping Machines

Mueller B-101 and A-3 Drilling and Tapping Machines TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology

More information

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines 40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3

More information

FDH Series Compact Finger Slides

FDH Series Compact Finger Slides FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for

More information

Hydraulic & Mechanical Power. SC106 Product Catalog. A Century of Product Integrity

Hydraulic & Mechanical Power. SC106 Product Catalog. A Century of Product Integrity SC106 Product Catalog A Century of Product Integrity Hydraulic & Mechanical Power cylinders hand pumps mechanical accessories power pumps lifting jacks hydraulic tools bolting presses TABLE OF CONTENTS

More information

TC 170 & TC 170 PD TRANSFER CASE

TC 170 & TC 170 PD TRANSFER CASE Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS

More information

Fisher 1061 Pneumatic Piston Rotary Actuator with Style F & G Mounting Adaptations

Fisher 1061 Pneumatic Piston Rotary Actuator with Style F & G Mounting Adaptations Instruction Manual 1061 F & G Actuator Fisher 1061 Pneumatic Piston Rotary Actuator with Style F & G Mounting Adaptations Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

Chief EZ Liner S21 PARTS MANUAL. 1999 Chief Automotive Systems, Inc.

Chief EZ Liner S21 PARTS MANUAL. 1999 Chief Automotive Systems, Inc. Chief EZ Liner S21 R 1999 Chief Automotive Systems, Inc. CHIEF EZ LINER CHIEF S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Systems, Inc. warrants for one year from date of installation and/or

More information

Rexroth. Spare parts list. Bosch Group. Part No.: R909401762 Designation: VERSTELLPUMPE A4V-125 HD

Rexroth. Spare parts list. Bosch Group. Part No.: R909401762 Designation: VERSTELLPUMPE A4V-125 HD : R909401762 : VERSTELLPUMPE A4V-125 HD *G* 1 R909400454 ROTARY GROUP L 2 R909414470 HYDRAULIC CONTROL L 3 R909080279 PORT PLATE WITH VALVES L 4 R909400395 INTERNAL GEAR PUMP L 6 R909401736 CONTROL MODULE

More information

Railgates By THIEMAN IMPORTANT! KEEP IN VEHICLE! PLEASE READ AND UNDERSTAND THE CONTENTS OF THIS MANUAL BEFORE OPERATING THE EQUIPMENT.

Railgates By THIEMAN IMPORTANT! KEEP IN VEHICLE! PLEASE READ AND UNDERSTAND THE CONTENTS OF THIS MANUAL BEFORE OPERATING THE EQUIPMENT. TVL SERIES Railgates By THIEMAN TVL 20, TVL 30, TVL 20A, TVL 30A OWNERS MANUAL/PARTS LIST! IMPORTANT! KEEP IN VEHICLE! PLEASE READ AND UNDERSTAND THE CONTENTS OF THIS MANUAL BEFORE OPERATING THE EQUIPMENT.

More information

DYNA RIDER FOOTBOARD KIT

DYNA RIDER FOOTBOARD KIT -J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English

More information

880 HYDRAULIC BENDER

880 HYDRAULIC BENDER OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 880 HYDRAULIC BENDER Read and understand this material before operating or servicing this tool. Failure to understand how to safely operate this tool could

More information

Many Products...One Source

Many Products...One Source PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K

More information

8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267

8D.1 BALL ANGLE METER VALVES - 3/4 & 1 P-24258 B-24258 E-24259 B-24259 B-24266 B-24267 BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.

More information

with installation dynafact boost GAUGE this manual is for use with systems 64050-64054

with installation dynafact boost GAUGE this manual is for use with systems 64050-64054 owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 GENERAL INSTALLATION PRACTICES This manual is an installation guide for all 1. Banks DynaFact

More information

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge! Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm

More information

TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves

TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today

More information

INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS

INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles

More information

HYDRAULIC TABLE CART 500-LB.

HYDRAULIC TABLE CART 500-LB. HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic

More information

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br

More information

HAND PALLET TRUCK Lift-Rite

HAND PALLET TRUCK Lift-Rite HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).

More information

Hydraulic Compressor Module

Hydraulic Compressor Module Down Force Circuit 3/8 PTC Ports Hydraulic Compressor Module (Top 2 Shown With Plugs) Lift Force Circuit Tank Drain (Pull Cord) 10 Gallon Air Tank Down Pressure Gauge Lift Pressure Gauge 3/8 Quick-Connect

More information

Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors

Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,

More information

Rear Disc Kit. Front Caliper

Rear Disc Kit. Front Caliper Caliper and Wheel Kit 52-0600 1973-85 FX-FLH Chrome Rear Wheel/Brake Assembly includes chrome 16 x 3.0 Wheel Assembly, chrome caliper, chrome 51T sprocket with bolts, 10 or 11 1 /2 rear drill brake disc,

More information

Throttle Controls for Diesel Engines

Throttle Controls for Diesel Engines Throttle Controls for Diesel Engines Electronic Products WM526 Electronic Foot Pedal Assembly WM528 Electronic Foot Pedal Assembly WM540 Electronic Foot Pedal Assembly WM531 Remote Sensor Assembly WM534

More information

Repair of Hyd-ro-ac Actuators

Repair of Hyd-ro-ac Actuators Repair of Hyd-ro-ac Actuators OVERHAUL INSTRUCTIONS SS-.2A-1V SS-.5A-1V SS-.5A-2V Read the entire contents of these instructions before installing the actuator and before making any connections to the

More information

THE SIMPLEX HAND PUMP

THE SIMPLEX HAND PUMP INTRODUTION HND PUMPS THE SIMPLEX HND PUMP Pivoting linkage reduces wear for longer pump life. djustable pivot for the absolute lowest handle effort. Large bronze piston for more speed and durability.

More information

Complete Systems & Parts Automatic Oiler & Grease Bank

Complete Systems & Parts Automatic Oiler & Grease Bank MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of

More information

OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80

OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80 OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80 Read the Operator s Manual entirely. When you see this symbol, be aware that the subsequent instructions and warnings are serious - follow without

More information

Original Line Cylinders

Original Line Cylinders Original Line Original Line How to Order Introduction to Bimba Standard Air Three-Position Air with Adjustable Cushions MRS Non-Rotating Air PC Steel Non- Original Line Steel (Bell Ring Style) Original

More information

OCTOPUS SELECTION & INSTALLATION GUIDE

OCTOPUS SELECTION & INSTALLATION GUIDE OCTOPUS SELECTION & INSTALLATION GUIDE 38mm BORE LINEAR ACTUATOR STYLES LAM & LAR A. GENERAL DESCRIPTION: The Octopus hydraulic linear actuator is a simple, efficient and reliable way of driving the rudder

More information

Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19

Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19 Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR

More information

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F

More information

RIVET BUSTERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.

RIVET BUSTERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A. S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1038 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill and attach an in-line oiler to the air tool. Use air

More information

Series 30000 Hose Reels

Series 30000 Hose Reels Operating Instructions and Parts List for Series 30000 Hose Reels - MANUAL DRIVEN - - POWER DRIVEN - SAFETY PRECAUTIONS Personal injury and/or equipment damage may result if proper safety precautions are

More information

UNIT CONVERSIONS & FORMULAS

UNIT CONVERSIONS & FORMULAS 4, PSI UNIT CONVERSIONS & FORMULAS MEASUREMENT CONVERSION EXAMPLE 1 in. = 25.4 mm 12 in. x 25.4 = 34.8 mm 1 in. =.254 m 12 in. x.254 = 3.5 m LENGTH 1 ft. =.348 m 12 ft. x.348 = 3.68 m 1 mm =.394 in. 1

More information

ENGLISH FORK GUIDE 2013

ENGLISH FORK GUIDE 2013 FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,

More information

Working Pressure - Hose Ends

Working Pressure - Hose Ends Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES

More information

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431) Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,

More information

2016 Price Sheet. Custom Built Replacement Chassis

2016 Price Sheet. Custom Built Replacement Chassis 2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro

More information

550658 D. PARAMETER SPECIFICATION Measured Variable: Displacement

550658 D. PARAMETER SPECIFICATION Measured Variable: Displacement T E M P O S O N I C S L S E R I E S LH 550658 D P r o d u c t S p e c i f i c a t i o n s Temposonics L Series position sensors are available with analog outputs (voltage or current) or digital outputs

More information

Power Cube Open Source Ecology Page 1. Power Cube. Version 4

Power Cube Open Source Ecology Page 1. Power Cube. Version 4 Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete

More information

BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00

BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00 Rocker Boxes 65-1137 Exhaust Lifter Cable 15.00 65-1163 Exhaust Lifter Cable Holder S/S 9.00 2-443 Exhaust Lifter Cable Holder Nut S/S 0.50 65-401 Exhaust Lifter Spindle Felt 2.00 65-387 Exhaust Lifter

More information

1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55

1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951

More information

INSTALLATION MANUAL MODEL RP-100

INSTALLATION MANUAL MODEL RP-100 INSTALLATION MANUAL FOR 24 VALVE 5.9L CUMMINS POWERED DODGE TRUCKS 2003 THROUGH 2004.5 MODEL RP-100 READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION 5400 BUSINESS 50 WEST SUITE 8 573 635-0555

More information

multi-axis system ROBOTRAX cable 3D cable carrier system carrier

multi-axis system ROBOTRAX cable 3D cable carrier system carrier 3D cable multi-ais 3D cable carrier system carrier system Key Features: Perfect for 3D multi-ais movement applications. Maintains a pre-determined minimum bend radius Open-style design allows for easy

More information

Stainless Steel Single and Dual Circulation Kits

Stainless Steel Single and Dual Circulation Kits Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating

More information

Mercedes 722.3 722.4

Mercedes 722.3 722.4 96 Mercedes 7. 7. 5 6 7 8 - Clutch K - Brake Band B - Disc Brake B - Wide Planet Pinion 5 - One-Way Clutch F 6 - Clutch K 7 - Brake Band B 8 - Narrow Planet Pinion Int. Band Fwd. Band Rev. Clutch Direct

More information

Where to order engine kits The displacer cylinder CONTINUED

Where to order engine kits The displacer cylinder CONTINUED By Harry Walton OCUS sunlight on this model engine, and it runs at full speed, fueled by Fthe biggest nuclear reactor in the solar system the sun. Power is ample to drive a midget water pump or spin a

More information

Monster Mini Stock Assn rules for 2015

Monster Mini Stock Assn rules for 2015 Monster Mini Stock Assn rules for 2015 *note 2 engine combinations* BODY - stock auto only may have complete aluminum body inner panel may be removed rear of car must be closed - no holes or flaps to meet

More information

PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C**

PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C** Service Data Vickers Piston Pumps Low Noise Industrial Piston Pump PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 C, CM Compensator

More information

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93 Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct

More information

Technical Information

Technical Information Technical Information This section of the catalogue provides technical information that will help specify, install and maintain Surelock McGill devices and components. The topics are listed below: Blast

More information

WATER & SEWER CORROSIVE RESISTANT PRODUCTS

WATER & SEWER CORROSIVE RESISTANT PRODUCTS WATER & SEWER CORROSIVE RESISTANT PRODUCTS The Standard of Excellence in the Industry CASING SPACERS COUPLINGS & FLANGE COUPLING ADAPTERS REPAIR CLAMPS DUCTILE IRON SADDLES STAINLESS STEEL SADDLES TAPPING

More information

Heavy Duty Bolted Cylinders

Heavy Duty Bolted Cylinders Heavy Duty Bolted Cylinders COUNT ON THE HYDRAULICS EXPERT In any hydraulics system, a combination of critical components convert power into productive, efficient motion. If you re looking for superior

More information

Copper and Copper Alloy Tube, Pipe and Fittings

Copper and Copper Alloy Tube, Pipe and Fittings Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification

More information

800-348-8467 www.fittingsunlimited.com

800-348-8467 www.fittingsunlimited.com Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections

More information

Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division

Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12

More information

Experience In Motion. Valtek Spring Cylinder Linear Actuators

Experience In Motion. Valtek Spring Cylinder Linear Actuators Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators

More information

MODEL T200-F18 MODEL T125-F18 Finish Nailers

MODEL T200-F18 MODEL T125-F18 Finish Nailers P MODEL T200-F18 MODEL T125-F18 Finish Nailers IMPORTANT! DO NOT DESTROY It is the customer s responsibility to have all operators and service personnel read and understand this manual. OPERATING MANUAL

More information

Spray Height Control System

Spray Height Control System Spray Height Control System Hagie 2100/2101/284/dts Installation Manual Improving the competitiveness of Industry and Agriculture through Precision Measurement Printed in Canada Copyright 2005-08 by NORAC

More information

DeZURIK 3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT

DeZURIK 3-20 BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT 3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT Instruction D10386 August 2013 Instructions These instructions provide installation, operation and maintenance information for BAW Butterfly Valves.

More information

!Hydraulic Jacks & Tools

!Hydraulic Jacks & Tools !Hydraulic Jacks & Tools Why hydraulics? Hydraulics is the kind of power transmission which allows the greatest density of forces. There is no other kind of power transmission that will transmit comparable

More information

MACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC

MACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC RECOVERY SUPEREVAC 29 RECOVERY 1/4" 4-IN-1 BALL VALVE TOOL For vacuum, charge, cores and recovery 18997 18975 18971 18978 18979 Remove and replace Schrader cores without losing charge. Extra 1/4" side

More information

Service Manual Rol-Lift

Service Manual Rol-Lift R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing

More information

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997 Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47

More information

2:1 RATIO TRANSFER PUMP

2:1 RATIO TRANSFER PUMP OP232-INST 2:1 RATIO TRANSFER PUMP OPERATING MANUAL WITH PARTS IDENTIFICATION IPM INC. Manufactured by International Pump Manufacturing, Inc. Covers models: OP232C, OP242CD and OP242A. Manual Number: MOP232062008

More information

INSTALLATION MANUAL MODEL RP-150

INSTALLATION MANUAL MODEL RP-150 INSTALLATION MANUAL FOR 24 VALVE 5.9L CUMMINS POWERED DODGE TRUCKS 2003 THROUGH 2004.5 MODEL RP-150 READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION 5400 BUSINESS 50 WEST SUITE 8 573 635-0555

More information

Stainless Steel Valves For the Sanitary Industries

Stainless Steel Valves For the Sanitary Industries www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves

More information

KELGATE BRAKES - price list for 2014 Page 1

KELGATE BRAKES - price list for 2014 Page 1 KELGATE BRAKES - price list for 2014 Page 1 Description GBP (Kgms) Disc's:- FV = Fully Vented RV = Radially Vented New systems are supplied dry. 02-9028 Charge for bleeding per caliper 18.00 00-8080 GTK'

More information

Auxiliary Rams USERS MANUAL

Auxiliary Rams USERS MANUAL Auxiliary Rams 2007 Chief Automotive Technologies, Inc. Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one

More information

*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.

*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...

More information

Transport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.

Transport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com. Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index

More information

Hydraulic Transmission Jacks Operating Instructions & Parts Manual

Hydraulic Transmission Jacks Operating Instructions & Parts Manual Blackhawk Automotive is a Licensed Trade Mark Made by SFA Companies, Kansas City, MO Hydraulic Transmission Jacks Operating Instructions & Parts Manual Model BH7011 BH7210 Capacity 1/2 Ton 1 Ton SFA Companies

More information

PARTS SECTION. Section MF4

PARTS SECTION. Section MF4 PARTS SECTION Section MF4 Wheels, Steering, Axle; hubs, rims, steering pumps, ALLIS CHALMERS RADIATOR HOSE ALLIS CHALMERS RADIATOR HOSE 70243014 180, 185, 190, 190XT 70248233 180, 185, 190, 190XT Radiator

More information

Fixtures - Parts - Accessories to shampoo bowls

Fixtures - Parts - Accessories to shampoo bowls Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example,

More information

Index 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9

Index 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9 Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.

More information

PART 2 FORKLIFT HYDRAULIC SYSTEM

PART 2 FORKLIFT HYDRAULIC SYSTEM PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity

More information

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431

More information

92-00 Civic/ 94-01 Integra/ 93-97 Del Sol/ 92-95 CRX Rear Kit Part No. 75540

92-00 Civic/ 94-01 Integra/ 93-97 Del Sol/ 92-95 CRX Rear Kit Part No. 75540 92-00 Civic/ 94-01 Integra/ 93-97 Del Sol/ 92-95 CRX Rear Kit Part No. 75540 www.airliftperformance.com MN-514 (06409) NPR 4762 Please read these instructions completely before proceeding with installation

More information