PARTICULARS OF FACTORIES PAYING REVENUE OF RS. ONE CRORE AND ABOVE DURING THE YEAR AS COMPARED TO COMMISSIONERATE :CHENNAI-I

Size: px
Start display at page:

Download "PARTICULARS OF FACTORIES PAYING REVENUE OF RS. ONE CRORE AND ABOVE DURING THE YEAR AS COMPARED TO COMMISSIONERATE :CHENNAI-I"

Transcription

1 SL. NO P.L.A. CENVAT P.L.A. CENVAT RS. 1 TO 5 CRORES PARTICULARS OF FACTORIES PAYING REVENUE OF RS. ONE CRORE AND ABOVE DURING THE YEAR AS COMPARED TO COMMISSIONERATE :CHENNAI-I NAME & ADDRESS OF FACTORY 1 Amalgamations Repco Ltd, 'J' Gardens, G.N.T.Road, Chennai ECC CODE WHETHER PUBLIC SECTOR/ PVT. SECTOR/ JOINT SECTOR/ COOPERATIVE SECTOR/ GOVT. UNDERTAKING NAME OF THE COMMODITY UNIT OF QUANTITY PRODUCTION QUANTITY IN '000s CLEARANCE QUANTITY IN '000s VALUE OF CLEARANCE (RS. IN CRORES) TOTAL REVENUE REALIZED (RS. IN CRORES) AADCA8200EXM002 Pvt. Sector Clutches Nos Balmer and Lawrie Co.Ltd., (G&L) 32 Settangadu Village,Manali, Chennai-68 AABCB0984EXM004 Pub. Sector Lubricating Grease MT Balmer and Lawrie Co.Ltd., (LCD) 32 Settangadu Village, Manali, Chennai Cholayil Private Ltd.,No.44&45, Jumbuli Road, Madhavaram, Chennai-60. AABCB0984EXM007 Pub. Sector Synthetic fat liqour Lubricating Oil KL Kgs Synthetic tanning Kgs substance Hydro Chloric MT Others Kgs AAACC3123BXM005 Pvt. Sector Ayurvedic Nos Medimix Soap 5 Coromandel Fertilisers Ltd. Ennore, Chennai AAACC78521CXM003 Pvt. Sector Phospho Gypsum MT Sulphuric Acid MT

2 6 Eveready Industries India Ltd., Door No.123/ 2 & 3, Ponneri High Road, Manali, New Town, Chennai AAACE5778NXM048 Pvt. Sector Zinc Ingots Kgs Futura Fibres (A Division of Futura AAACI3404KXM002 Pvt. Sector Polyester Staple Polyesters Limited), 1, Kamarajar Salai, Fibre Manali, Chennai MT Greaves Cotton Ltd, 67, TH Road, Thangal, Thiruvottiyur, Chennai IMAC Alloy Castings, 348, Madhavaram Redhills High Road, Chennai IOC Limited (Drum Plant), Tondiarpet, Chennai Kothari Petrochmicals Ltd, No.1/2B, 33/5, Sathangadu Village, Manali, Chennai AAACG2062MXM009 Pvt. Sector Concrete Mixer& Parts Nos Waste & Scrap of Kgs Ir on & Steel AABFI6075NXM001 Pvt. Sector Aluminium Ingots Kgs Zinc Ingots Kgs Lead Ingots Kgs AAAG11681GXM056 Pub. Sector Drums/Barrels Nos AAACK1347HXM002 Pvt. Sector Poly-Isoblutyene MT Vidya Snuff, No.14, III Street, Dr. Radhakrishnan Nagar, Korukkupet, Chennai Ashok Leyland Limited (Parts Warehouse), Mathur, Chennai Mac Pac Industries, DOOR NO.123/2, PONNERI HIGH ROAD, MANALI, NEW TOWN, CHENNAI-103 Light Polymer MT LPG MT AAAPV3479JXM001 Pvt. Sector Snuff Kgs AAACA4651LXM013 Pvt. Sector Parts and Accessories of MV and IC Engines Nos AABFM4547RXM001 Pvt. Sector Lubricating Oil Ltrs Nadi Airtechnics Pvt. Ltd, 34, GNT Road, Ponnimmanmedu, Madhavaram, Chennai AABCN0003EXM002 Pvt. Sector Industrial Fan& Parts Nos Waste & Scrap of Iron & Steel Kgs

3 16 Perumal Snuff & Co., N0.33, Thyappa Mudali Street, Chennai AAAFP1577DXM001 Pvt. Sector Snuff Kgs Petro Araldite Pvt. Ltd, Manali Express Highway, Manali, Chennai AAACP5685KXM001 Pvt. Sector Epoxy Resin Kgs Sivasri Engineering Pvt.Ltd, 11, Ponneri High Road, Elanthacherry, Chennai AAICS0008HXM001 Pvt. Sector Accessories for Ready Mix Concrete Nos Southern Alloy Foundries Pvt.Ltd. AAACS5060RXM001 Pvt. Sector S.G.Iron Castings Kgs No.149 GNT Road, Ponniammanmedu, Chennai SRF Polymers Ltd, Manali Industrial Area, Manali, Chennai AAFCS9521AXM002 Pvt. Sector Nylon chips Kgs Nylon yarn Kgs Nylon Yarn Kgs Waste / Nylon Twine Waste Others Kgs Tide Water Oil Co (I) Ltd., Door No.18/19, New Ennore High Road, Thangal,Tiruvottiyur, Chennai Tide Water Oil Co (I) Ltd., Royapuram, Door No.14, Kamaraj Part Street, Royapuram, Chennai-13 AABCT1122CXM005 Pub. Sector Lubricating Oil Ltrs Lubricating Grease Kgs AABCT1122CXM004 Pub. Sector Lubricating Oil Ltrs Lubricating Grease Kgs Wimco Ltd., Thiruvottiyur, Chennai AAACW3082BXM003 Pvt. Sector Matches Boxes SUB TOTAL

4 RS. 5 TO 10 CRORES 1 AmalgamationValeo Cluth Pvt. Ltd, AACA9038PXM001 Pvt. Sector Motor Vehicle Nos , 'J" Gardens, G.N.T.Road, Chennai Parts 2 BPCL 35, Vaidyanathan Mudali Street AAACB2902MXM015 Pub. Sector Lubricating Oil Ltrs (Lube Plant), Tondiarpet, Chennai Castrol India Ltd., No.10 Elaiya Mudali Street, Tondiarpet, Chennai-81 AAACC4481EXM001 Pvt. Sector Lubricating Oil Ltrs Eveready Industries India Ltd, No.1075, Thiruvottiyur High Road, Thiruvottiyur, Chennai Lubricating Ltrs Preparations Hydraulic Brake Fluids Ltrs AAACE5778NXM001 Pvt. Sector Batteries Nos Polysleeve Nos Batteries Tools/Machinery Nos Others Kgs Futura Preforms( A Division of Futura Polyesters Limited), 1, Kamarajar Salai, Manali, Chennai AAACI3404KXM004 Pvt. Sector Pet Preforms Nos ITC Ltd, PB No.2277, Tiruvottriyur, Chennai Manali Petrochemicals Ltd Plant II, Ponneri High Road, Manali, Chennai - 68 AAAC15950LXM002 Pvt. Sector Printed. HLCS Nos unfolded captive Printed carton boxes and cases Nos Printed carton Boxes OC Corrugated Nos AAACM3404DXM002 Pvt. Sector Propylene Glycol MT Polyols MT

5 8 Manali Petrochemicals Ltd., Plant I AAACM3404DXM001 Pvt. Sector Propylene glycol MT Ponneri High Road, Manali, Chennai - 68 Polyol MT others MT The KCP Ltd, Engineering Unit, Post Box No.2278, Thiruvottiyur, Chennai AAACT8046JXM001 Pvt. Sector Parts of machines for cement and sugar machinery Nos Valve Body Castings Nos Waste and Scrap Kgs of Iron & Steel SUB TOTAL RS. 10 TO 25 CRORES 1 HPCL, Chennai Terminal, 98/99, Ellaya Mudali Street, Chennai Ennore Foundries Limited, 1, Kathivakkam High Road, Ennore, Chennai MRF Ltd, Thiruvottiyur, Chennai Carborandum Universal, Post Box No.2272, TH Road, Tiruvottiyur, Chennai IOC (LBP), No.2, Ennore High Road, Tondiarpet, Chennai AAACH1118BXM 026 Pub. Sector Lubricanting oils KL AAACE1078KXM001 Pub. Sector Iron Castings Nos Alu. Castings Nos Motor Vehicle Par Nos AAACM4154GXM007 Pvt. Sector Tyres, Tubes & Nos Flaps AAACC2474PXM014 Pvt. Sector Bonded Nos Abrasives Coated Nos Abrasives Cimcool Ltrs AAACI1681GXM057 Pub. Sector Lubricants Kgs Lubricants Ltrs Lubricants Kgs Others Ltrs Kgs

6 6 Royal Enfield, (A Uni of Eicher Motors Limited), No.19, Thiruvottiyur High Road, Chennai AAACE3883DXM004 Pvt. Sector Motor Cycles Nos SUB TOTAL RS. 25 TO 50 CRORES 1 Tamilnadu Petroproducts Ltd., Manali Exs Highway, Manali, Chennai AAACT1295MXM001 Pub. Sector Linear Alkyl Benzene MT Epichlorohydrine MT Caustic Soda Lye MT Others MT SUB TOTAL RS. 50 TO 100 CRORES NIL RS. 100 CRORES AND ABOVE 1 Ashok Leyland Ltd, Ennrore, Chennai Chennai Petroleum Corporation Limited, Manali, Chennai AAACA4651LXM008 Pub. Sector Motor Vehicle Chasis Numbers AAACM4392CXM002 Pub. Sector High Speed DieseKilolitres Motor Sprit Kilolitres Furnace Oil Metric Tonne Others Kilolitres Metric Tonne SUB TOTAL

RISK INSPECTION REPORT BALMER LAWRIE & CO. LTD. T.D.Prasad, B.E (Hons), M.B.A, M.I.E (India) Risk Engineer. ALEgION INSURANCE BROKING PRIVATE LIMITED

RISK INSPECTION REPORT BALMER LAWRIE & CO. LTD. T.D.Prasad, B.E (Hons), M.B.A, M.I.E (India) Risk Engineer. ALEgION INSURANCE BROKING PRIVATE LIMITED RISK INSPECTION REPORT ON BALMER LAWRIE & CO. LTD MANALI CHENNAI 600 068 TAMILNADU INDIA Prepared by T.D.Prasad, B.E (Hons), M.B.A, M.I.E (India) Risk Engineer On Behalf Of ALEgION INSURANCE BROKING PRIVATE

More information

INDIAN LUBRICANT INDUSTRY - SHRINKING MARGINS

INDIAN LUBRICANT INDUSTRY - SHRINKING MARGINS INDIAN LUBRICANT INDUSTRY - SHRINKING MARGINS Declining demand growth of automotive lubricants, increasing competition on account of the presence of a large number of players, and increasing raw material

More information

Tax Rate under the U.P. Tax on Entry of Goods into Local Areas Act, 2007 Under Sections 4 and 17 thereof

Tax Rate under the U.P. Tax on Entry of Goods into Local Areas Act, 2007 Under Sections 4 and 17 thereof 2009 ENTRY TAX ALPHABETICAL RATE OF TAX 1 Tax Rate under the U.P. Tax on Entry of Goods into Local Areas Act, 2007 Under Sections 4 and 17 thereof Sl. No. 1. Air Conditioner 1% of the Value of the goods

More information

PROJECT PROFILE AUTO PISTONS

PROJECT PROFILE AUTO PISTONS MSME-DI KANPUR PROJECT PROFILE ON AUTO PISTONS PART-I NAME OF THE PRODUCT : AUTO PISTONS. PRODUCT CODE : 374743002. QUALITY & STANDARD : IS: 7793:1975. PRODUCTION CAPACITY : The production capacity of

More information

AADHAR CENTRE DETAILS

AADHAR CENTRE DETAILS 1 Zonal Office, Zone 1 TH Road, Thiruvottiyur, Chennai 19 Asst. Exe. Engineer. Junior Engineer. Unit- 3 9445190103 2 Zone 1 Tiruvottiyur Division Office, Zone 1, Ward 2 Ennore, Chennai 57 Asst. Exe. Engineer.,

More information

INTERNATIONAL STANDARD INDUSTRIAL CLASSIFICATION OF ALL ECONOMIC ACTIVITIES (ISIC): 3- and 4-digit levels of Revision 3

INTERNATIONAL STANDARD INDUSTRIAL CLASSIFICATION OF ALL ECONOMIC ACTIVITIES (ISIC): 3- and 4-digit levels of Revision 3 INTERNATIONAL STANDARD INDUSTRIAL CLASSIFICATION OF ALL ECONOMIC ACTIVITIES (ISIC): CODE INDUSTRY 3- and 4-digit levels of Revision 3 151 Processed meat, fish, fruit, vegetables, fats 1511 Processing/preserving

More information

ODISHA PCPIR: DEVELOPMENT OF EAST COAST MARKETS

ODISHA PCPIR: DEVELOPMENT OF EAST COAST MARKETS ODISHA PCPIR: DEVELOPMENT OF EAST COAST MARKETS Vishal K Dev, IAS Chairman & Managing Director Odisha Industrial Infrastructure Development Corporation (IDCO) 12.02.2015 ODISHA INDUSTRIAL OVERVIEW OF ODISHA

More information

Auto Pistons INTRODUCTION MARKET POTENTIAL

Auto Pistons INTRODUCTION MARKET POTENTIAL 7 Auto Pistons PRODUCT CODE : 374743002 QUALITY AND STANDARDS : IS 7793 : 1975 PRODUCTION CAPACITY : Qty. : 60,000 Nos. (per annum) Value : Rs. 36 Lakh MONTH AND YEAR : October, 2002 OF PREPARATION PREPARED

More information

42.1 Average Gaseous Composition of Dry Air in the Troposphere 627. 42.2 National Ambient Air Quality Standards (NAAQS) 628

42.1 Average Gaseous Composition of Dry Air in the Troposphere 627. 42.2 National Ambient Air Quality Standards (NAAQS) 628 Table No. Contents Page 42. ENVIRONMENT 42.1 Average Gaseous Composition of Dry Air in the Troposphere 627 42.2 National Ambient Air Quality Standards (NAAQS) 628 42.3 State of Ambient Air Quality in Major

More information

PROJECT REPORT FOR FLY ASH BRICKS MANUFACTURING UNIT. Qty Price for 10000 bricks/day. No s

PROJECT REPORT FOR FLY ASH BRICKS MANUFACTURING UNIT. Qty Price for 10000 bricks/day. No s PROJECT REPORT FOR FLY ASH BRICKS MANUFACTURING UNIT DATE: 15/3/13 Number of Working Days Number of Shift / Day/Shift Item of Production : Land : shed size: 30x60 feet min Power; Water: Labour : Annual

More information

a. Recycling Drop Off Centers Reservoir Library at Spillway Road- 24 hours a day, 7 days a week Brandon-Marquette Road- Weekdays 7:00-4:00

a. Recycling Drop Off Centers Reservoir Library at Spillway Road- 24 hours a day, 7 days a week Brandon-Marquette Road- Weekdays 7:00-4:00 1 List of County Programs a. Recycling Drop Off Centers Reservoir Library at Spillway Road- 24 hours a day, 7 days a week Brandon-Marquette Road- Weekdays 7:00-4:00 b. White Goods Drop-Off Centers Brandon-Marquette

More information

A Brief Perspective on the Indian Metals Recycling Industry. Arnab Kumar Hazra Director, FICCI

A Brief Perspective on the Indian Metals Recycling Industry. Arnab Kumar Hazra Director, FICCI A Brief Perspective on the Indian Metals Recycling Industry Arnab Kumar Hazra Director, FICCI Background The Metals Recycling Industry will increasingly play a larger role. India imported 4.9 million tonnes

More information

1 Description and assessment of the Materials used in the Product. 3 Description and assessment of the Surface Treatment Methods

1 Description and assessment of the Materials used in the Product. 3 Description and assessment of the Surface Treatment Methods Kimmo Sundström page 1 of 6 James mesh back Environmental impact assessment 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description

More information

ImpEE. Recycling of Plastics THE PROJECT IMPROVING ENGINEERING EDUCATION

ImpEE. Recycling of Plastics THE PROJECT IMPROVING ENGINEERING EDUCATION THE IMPROVING ENGINEERING EDUCATION ImpEE PROJECT Recycling of Plastics Plastic waste in the UK 3 million tonnes of waste plastic are produced a year in the UK. 1 tonne = 20,000 plastic bottles 7% of this

More information

PREPARED BY : MSME-Development Institute IV Floor, Harsiddh Chambers Ashram Road Ahmedabad

PREPARED BY : MSME-Development Institute IV Floor, Harsiddh Chambers Ashram Road Ahmedabad PRODUCT : GALVANISED STEEL WIRE PRODUCT CODE : QUALITY STANDARD : IS: 4826 : 1979 IS: 278 : 1978 IS: 279 : 1981 PRODUCTION CAPACITY : Qty. : 6140 M.T. ( PER ANNUM) Value : 2312.17 Lakhs MONTH & YEAR :

More information

SoftX Environmental impact assessment MHI/ Page 1(6) 2 Description and assessment of the Production process

SoftX Environmental impact assessment MHI/ Page 1(6) 2 Description and assessment of the Production process Page 1(6) SoftX CHAIR 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

Implementation of Excise for Dealers in Tally.ERP 9

Implementation of Excise for Dealers in Tally.ERP 9 Implementation of Excise for Dealers in Tally.ERP 9 The information contained in this document is current as of the date of publication and subject to change. Because Tally must respond to changing market

More information

GlobalGear Series. Process Pumps. Pump Your Heart Into It

GlobalGear Series. Process Pumps. Pump Your Heart Into It GlobalGear Series Process Pumps Pump Your Heart Into It BUILT ON A TIME-TESTED DESIGN & MORE THAN 90 YEARS OF GEAR PUMP ENGINEERING EXPERIENCE Capable of tackling the toughest high-viscosity applications,

More information

Typical applications for liquid ring vacuum pumps

Typical applications for liquid ring vacuum pumps Typical applications for liquid ring vacuum pumps Type of Industry Abrasives Manufacture: Aircraft Industry: Automobile Industry: Battery Manufacture: Beverage Industry: Bleach and Detergent Industry:

More information

MEMBERSHIP APPLICATION FORM

MEMBERSHIP APPLICATION FORM MEMBERSHIP APPLICATION FORM The Executive Director EEPC INDIA (formerly Engineering Export Promotion Council ) Vanijya Bhavan (1 st Floor) International Trade Facilitation Centre 1/1, Wood Street Kolkata

More information

RELIANCE INDUSTRIES LIMITED

RELIANCE INDUSTRIES LIMITED RELIANCE INDUSTRIES LIMITED Date: 13/06/2011 CMP Rs. 926 ACCUMULATE Potential Upside: 15-20% CMP 926 Sensex 18,266 Nifty 5,482 Industry/Sector Oil & Gas 52 Week Range (BSE) 1187 / 885 Free Float (%) 54.9%

More information

Incorporated in 1975, in Chennai, India Annual Turn over of $2.3 million USD for year 2013-14 Equipped to manufacture STEEL FORGINGs for:

Incorporated in 1975, in Chennai, India Annual Turn over of $2.3 million USD for year 2013-14 Equipped to manufacture STEEL FORGINGs for: Chennai, India Profile Incorporated in 1975, in Chennai, India Annual Turn over of $2.3 million USD for year 2013-14 Equipped to manufacture STEEL FORGINGs for: Automobile Sector Earth Moving Equipments

More information

PRJ PUBLICATION PRJ Publication, CUSTOMER PREFERENCE AND CONSUMPTION OF VARIOUS GRADES OF CEMENT IN CHENNAI

PRJ PUBLICATION PRJ Publication,  CUSTOMER PREFERENCE AND CONSUMPTION OF VARIOUS GRADES OF CEMENT IN CHENNAI JMRD Journal of Management Research and and Development (JMRD), (JMRD), ISSN 2248 937X (Print) ISSN 2248 9390(Online), ISSN 2248 Volume 937X (Print) 1, Number 1, January - April (2011) ISSN 2248 9390(Online),

More information

Famous Mechanical Companies HR E-Mail.id s:

Famous Mechanical Companies HR E-Mail.id s: Famous Mechanical Companies HR E-Mail.id s: Ashok Leyland: hrd_careers@ashokleyland.com MRF : careers@mrfmail.com Kcp Limited: jobs@kcp.co.in Tubes India: response@tubesindia.co.in TI India: jobs@tii.murugappa.com

More information

RECYCLING OF WASTE TYRES INTO RECLAIM RUBBER

RECYCLING OF WASTE TYRES INTO RECLAIM RUBBER RECYCLING OF WASTE TYRES INTO RECLAIM RUBBER Re-generated or Reclaimed rubber is produced by partial de-vulcanization of rubber granulate obtained from end-of-life tyres and other rubber products. The

More information

A ) Agriculture, Forestry and Fishing*

A ) Agriculture, Forestry and Fishing* The Australian and New Zealand Standard Industrial Classification (ANZSIC) is a standard classification developed by the Australian Bureau of Statistics for use in Australia and New Zealand for the analysis

More information

Rate of Tax under The Rajasthan Tax on Entry of Goods into Local Areas Act, 1999 (Act No. 13 of 1999) with effect from 08.03.

Rate of Tax under The Rajasthan Tax on Entry of Goods into Local Areas Act, 1999 (Act No. 13 of 1999) with effect from 08.03. Rate of Tax under The Rajasthan Tax on Entry of Goods into Local Areas Act, 1999 (Act No. 13 of 1999) with effect from 08.03., namely:- S.No Description of Goods Rate of Tax (%) 1 Sugar 0.2 2 Stainless

More information

(Member of Multi Commodity Exchange of India Ltd)

(Member of Multi Commodity Exchange of India Ltd) (Member of Multi Commodity Exchange of India Ltd) New No.9, Old No.4/1, 2nd Floor, Masha Allah Building, Bheema Sena Garden Street, Mylapore, Chennai - 600 004, Tamilnadu, INDIA

More information

PRODUCT AND TECHNICAL DATA

PRODUCT AND TECHNICAL DATA PRODUCT AND TECHNICAL DATA Castrol Brayco Micronic SV/3 Synthetic subsea production control fluid 2007 OSPAR compliant with no substitutable components Description Castrol Brayco Micronic SV/3 is a synthetic

More information

CLASSIFICATION SYSTEM BY FIELD AND SUB-FIELD OF EXPERTISE SUPPLIERS REGISTRY OF GOODS AND SERVICES ENAP GROUP OF COMPANIES I. Suppliers are classified in three groups: Classification Equipments, materials

More information

Sealed Air Corporation. Intermediate Bulk Containers For Aseptic and Non Aseptic Products

Sealed Air Corporation. Intermediate Bulk Containers For Aseptic and Non Aseptic Products Sealed Air Corporation Intermediate Bulk Containers For Aseptic and Non Aseptic Products Melbourne, Australia Primary Manufacturing Pouch Making Injection molding for fitments Film extrusion Clean Room

More information

MARINE SUPPLY SOLUTIONS

MARINE SUPPLY SOLUTIONS MARINE SUPPLY SOLUTIONS spill containment GUIDE SPILL CONTAINMENT GUIDE Spill Pads Spill Rolls Spill Booms Spill Pillows Spill Drum Mats & Socks Spill & Fleet Kits SPILL CONTAINMENT Spill Containment

More information

Depreciation Regulations Revisions to Depreciation Periods Part 3

Depreciation Regulations Revisions to Depreciation Periods Part 3 DAIWA DAIWA INSTITUTE OF RESEARCH LTD. 1 April 200 (No. of pages: ) Depreciation Regulations Revisions to Depreciation Periods Part Comparison of new depreciation schedule (Categories -16) and former schedule

More information

LUBRICATION & HAND TOOLS C-02. EQUIPMENT

LUBRICATION & HAND TOOLS C-02.  EQUIPMENT LUBRICATION EQUIPMENT & HAND TOOLS C-0 ISO/TS949 Certified By QUALITY STATEMENT Quality Products and Services to our customers that meet and exceed their Expectations. We are Dedicated to Enhance our Customer

More information

Public Utilities Commission of Sri Lanka

Public Utilities Commission of Sri Lanka Lubricant Market Report 2013 Public Utilities Commission of Sri Lanka 02 nd September 2014 As the shadow regulator of the lubricant market, Public Utilities Commission of Sri Lanka, Collects and records

More information

Public Utilities Commission of Sri Lanka

Public Utilities Commission of Sri Lanka Public Utilities Commission of Sri Lanka 29 th May 2015 As the shadow regulator of the lubricant market, Public Utilities Commission of Sri Lanka, Collects and records operational information of the market.

More information

AUTOMOBILE GASKETS A. INTRODUCTION B. PRODUCT USES AND SPECIFICATIONS

AUTOMOBILE GASKETS A. INTRODUCTION B. PRODUCT USES AND SPECIFICATIONS AUTOMOBLE GASKETS A. NTRODUCTON The function of a gasket is to seal the two faces of components to avoid leakage of fluid and air in the system in automobiles and other pneumatic and hydraulic systems

More information

neis co.,ltd Policy neis challenges new capabilities of joining technology through intensive research and development for new ways.

neis co.,ltd Policy neis challenges new capabilities of joining technology through intensive research and development for new ways. Policy neis challenges new capabilities of joining technology through intensive research and development for new ways. neis co.,ltd 1.Specialty Welding / Brazing Consumables Outline: Company name neis

More information

Economies of Scale and Minimum Efficient Scale

Economies of Scale and Minimum Efficient Scale Economies of Scale and Minimum Efficient Scale ManEc 387 Economics of Strategy MARRIOTT SCHOOL BYU 1 Economies of scale Economies of scale exist when average total cost declines as output in a period rises.

More information

This processing information is meant for a general guide only. Depending on quantity and amount of time to process certain items, pricing can vary.

This processing information is meant for a general guide only. Depending on quantity and amount of time to process certain items, pricing can vary. This processing information is meant for a general guide only. Depending on quantity and amount of time to process certain items, pricing can vary. - Bare Bright Copper #1 Copper wire and cable that is

More information

KIRLOSKAR FIRE FIGHTING PUMPS AND PACKAGES

KIRLOSKAR FIRE FIGHTING PUMPS AND PACKAGES KIRLOSKAR FIRE FIGHTING PUMPS AND PACKAGES PUMPS CONFORMING TO U L R NFPA R TAC KIRLOSKAR BROTHERS LIMITED Kirloskar Brothers Limited, (KBL) the largest manufacturer and exporter of pumps in India is one

More information

The Challenge of Recycling Metals. Ken Mackenzie British Metals Recycling Association

The Challenge of Recycling Metals. Ken Mackenzie British Metals Recycling Association The Challenge of Recycling Metals Ken Mackenzie British Metals Recycling Association ken@recyclemetals.org The biggest challenge: IMAGE Steptoe and Son? Can banks Lower quality materials Deteriorating

More information

A c h i e v i n g O p t i m u m B a l a n c e f o r M a x i m u m V a l u e. Tough Pumps with Field Proven Reliability

A c h i e v i n g O p t i m u m B a l a n c e f o r M a x i m u m V a l u e. Tough Pumps with Field Proven Reliability A c h i e v i n g O p t i m u m B a l a n c e f o r M a x i m u m V a l u e Tough Pumps with Field Proven Reliability G L O B A L G E A R P R O C E S S P U M P GlobalGear was introduced in 2001, and since

More information

PROJECT PROFILE ON DECORATION OF CERAMIC TILES

PROJECT PROFILE ON DECORATION OF CERAMIC TILES PROJECT PROFILE ON DECORATION OF CERAMIC TILES PRODUCT : Decoration of Ceramic Tiles NIC CODE : Not Available (based on NIC 2004) PRODUCT CODE : Not Available (based on ASICC 2000) PRODUCTION CAPACITY

More information

Main Product. Silicones. Polyvinyl chloride Silicone oil Cellulose derivatives powder. Net Sales. (Billions of yen) Up 13.4% Operating Income

Main Product. Silicones. Polyvinyl chloride Silicone oil Cellulose derivatives powder. Net Sales. (Billions of yen) Up 13.4% Operating Income Review of Operations ANNUAL REPORT 2015 PVC Chlor-Alkali Silicones Specialty Chemicals Main Products Polyvinyl chloride Caustic soda Chloromethane Main Product Silicones Main Products Cellulose derivatives

More information

MANAGING AND MINIMISING WASTE Waste not, want not

MANAGING AND MINIMISING WASTE Waste not, want not MANAGING AND MINIMISING WASTE Waste not, want not 05 Straightforward advice to help vehicle repairers get ahead in today s business environment Good waste storage and disposal is an essential pollution

More information

ALUMINUM IMPACT EXTRUSION CAN MAKING. Fred Spohr

ALUMINUM IMPACT EXTRUSION CAN MAKING. Fred Spohr ALUMINUM IMPACT EXTRUSION CAN MAKING Fred Spohr September 11, 2012 Slug Blanking Blanking Press To-Melt Furnace Recycle Perforated Strip Vibratory Tumbler Slugs Annealing Oven Slugs Impact Extrusion Slug

More information

WHOLESALE/RETAIL PETROLEUM SIC CODES TO NAICS CODES For more detail information go to: http://www.census.gov/epcd/www/naicstab.htm

WHOLESALE/RETAIL PETROLEUM SIC CODES TO NAICS CODES For more detail information go to: http://www.census.gov/epcd/www/naicstab.htm WHOLESALE/RETAIL PETROLEUM SIC CODES TO NAICS CODES For more detail information go to: http://www.census.gov/epcd/www/naicstab.htm North American Industry Classification System (NAICS) The North American

More information

Project Profile. 1. Product : Disinfectant Fluids ( Phenolic Type ) 4. Production Capacity : 300 K.L. per Annum. (Valued Rs.

Project Profile. 1. Product : Disinfectant Fluids ( Phenolic Type ) 4. Production Capacity : 300 K.L. per Annum. (Valued Rs. Project Profile 1. Product : Disinfectant Fluids ( Phenolic Type ) 2. NIC Code (1998) : 311408001 (Based on NIC-1998) 3. Product Code : 32416 (Based on ASICC-2000) 4. Production Capacity : 300 K.L. per

More information

PVC PIPE MANUFACTURING UNIT

PVC PIPE MANUFACTURING UNIT PVC PIPE MANUFACTURING UNIT Introduction: Polyvinyl-Chloride (PVC) is a plastic product which has matchless versatility. It effectively replaces wood, paper and metal in several applications. As such plastic

More information

Prepared and Submitted by

Prepared and Submitted by Technical Feasibility Study Report of Proposed Sulfuric Acid and Phosphoric Acid Unloading Facilities, Acid Storage Tanks at the existing Wharf and Acid Transfer Pipeline Falling within the CRZ area &

More information

July Union Budget Impact on the Energy sector

July Union Budget Impact on the Energy sector July 2014 Union Budget 2014-15 Impact on the Energy sector Union Budget 2014-15 Impact on the Energy sector Contents 03 Overview 04 Key policy initiatives 05 Direct tax proposals 07 Indirect tax proposals

More information

Specifications for 250kVA DG Set

Specifications for 250kVA DG Set DETAILED SPECIFICATION FOR DIESEL ENGINE AND GENERATOR SET Sl. No Specifications for 250kVA DG Set 1 Diesel Engine (Suitable capacity to drive 250KVA alternator) The diesel engine should be vertical cylinder

More information

Pinta EQ Environmental impact assessment MRK/ 4-5-2010 Page 1(6) 2 Description and assessment of the Production process

Pinta EQ Environmental impact assessment MRK/ 4-5-2010 Page 1(6) 2 Description and assessment of the Production process Page 1(6) Pinta EQ 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods

More information

INDUSTRY SALES REVIEW. September Industry Performance Review Report of PPAC: September, 2016

INDUSTRY SALES REVIEW. September Industry Performance Review Report of PPAC: September, 2016 INDUSTRY SALES REVIEW September 2016 1 P a g e This report analyses the trend of consumption of petroleum products in the country during the month of September, 2016. Data on product-wise monthly consumption

More information

RUBBER SLEEVE KNIFE GATE VALVE. DIR 98/37/CE (MACHINES) DIR 97/23/CE (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A) DIR 94/9/CE (ATEX)

RUBBER SLEEVE KNIFE GATE VALVE. DIR 98/37/CE (MACHINES) DIR 97/23/CE (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A) DIR 94/9/CE (ATEX) RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries

More information

Environmental data in Annual Survey of Industries

Environmental data in Annual Survey of Industries Environmental data in Annual Survey of Industries Dr. Bivas Chaudhuri, CSO, India Manufacturing in Indian Economy India has emerged as one of the fastest growing economies over last two decades. Manufacturing

More information

REMI Industries for v9 Models

REMI Industries for v9 Models 1 Forestry, fishing, related activities, and other 113-115 1 Forestry and logging; Fishing, hunting, and trapping 113, 114 1 Forestry; Fishing, hunting, and trapping 1131, 1132, 114 2 Logging 1133 2 Agriculture

More information

Extraction Oil and Gas, LLC. Diamond Valley Central Oil Terminal Waste Management Plan

Extraction Oil and Gas, LLC. Diamond Valley Central Oil Terminal Waste Management Plan Extraction Oil and Gas, LLC. Diamond Valley Central Oil Terminal Waste Management Plan Scope: This Extraction Oil and Gas Waste Management Plan has been prepared to provide operations personnel at the

More information

UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING

UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING Introduction to Automobile Engineering Structure 1.1 Introduction Objectives 1.2 Definition 1.3 Classification of Vehicles 1.4 Layout of an Automobile Chassis

More information

ANNEXURE- I (TPSI) Annexure I SH 1/3

ANNEXURE- I (TPSI) Annexure I SH 1/3 ANNEXURE- I (TPSI) Annexure I SH 1/3 Actual annual performance/operational data for the lignite based thermal generating stations of NLC for the 5-year period from 2002-03 to 2006-07 1 Name of Company

More information

A guide to recycling non-nutrient agricultural waste in Ontario

A guide to recycling non-nutrient agricultural waste in Ontario I nd ustr y pr o duc t A guide to recycling non-nutrient agricultural waste in Ontario s t ew a r d sh i p TABLE OF CONTENTS Introduction 1 What is product stewardship? 1 Agricultural waste products collected

More information

PRODUCT AND TECHNICAL DATA

PRODUCT AND TECHNICAL DATA PRODUCT AND TECHNICAL DATA Castrol Transaqua HT2 Water-based subsea production control fluid 2007 OSPAR compliant with no substitutable components Description Castrol Transaqua HT2 is a water-based hydraulic

More information

7. Chemical Waste Disposal Procedures

7. Chemical Waste Disposal Procedures 7. Chemical Waste Disposal Procedures Substances that Can and Cannot be Disposed of via Sink Drains or in Regular Solid Refuse Containers 1. It is prohibited to pour down a sink or floor drain, or place

More information

Hilger u. Kern / Dopag Group

Hilger u. Kern / Dopag Group Metering Technology Hilger u. Kern / Dopag Group The eldomix 10x is a solvent free gear metering and mixing system, used to handle low to medium viscosity multi component media such as epoxy resins, polyurethanes

More information

MaxCell Technical Manual Design Parameters

MaxCell Technical Manual Design Parameters MaxCell Technical Manual Design Parameters Breaking Strength by Product Style, lbs Product Style Standard MaxCell Fire Resistant MaxCell Test Method 4 Cell 2,750 2,200 ASTM D 5 Bellcore 5 5.. Cell 2,50

More information

Molybdenum Fact Sheet

Molybdenum Fact Sheet (Moly), chemical symbol Mo, element number 42 of the periodic table, has one of the highest melting temperatures of all the elements, a lower density than most other highmelting point metals, the lowest

More information

PORT OF LONG POND WHARFAGE AND TRANSFER CHARGES TARIFF NOTICE EFFECTIVE NOVEMBER 1, Short Title

PORT OF LONG POND WHARFAGE AND TRANSFER CHARGES TARIFF NOTICE EFFECTIVE NOVEMBER 1, Short Title PORT OF LONG POND WHARFAGE AND TRANSFER CHARGES TARIFF NOTICE EFFECTIVE NOVEMBER 1, 2016 Short Title 1. This Notice may be cited as the Port of Long Pond Wharfage and Transfer Charges Tariff Notice. 2.

More information

http://www.cieplowniasiemianowice.pl/filtry.html

http://www.cieplowniasiemianowice.pl/filtry.html Oil skimmer is a device which helps remove surface oil. Skimmer is mounted in the selection location. An oil is absorbed by the teflon tape and is removed for example from bath to another external container

More information

WELL COME TO Vishal Manufacturers Pvt. Ltd.

WELL COME TO Vishal Manufacturers Pvt. Ltd. WELL COME TO Vishal Manufacturers Pvt. Ltd. We are one of the prominent manufacturer and exporters of cast iron castings, pump castings, industrial iron casting www.vishalmanufacturer.com VISHAL Manufacturer

More information

COMMERCIAL ENERGY BALANCE TABLES AND CONVERSION FACTORS

COMMERCIAL ENERGY BALANCE TABLES AND CONVERSION FACTORS COMMERCIAL ENERGY BALANCE TABLES AND CONVERSION FACTORS 3 The energy balance tables prepared by TERI provide an account of the different kinds of commercial energy sources. Columns represent various energy

More information

LIGHT, SAFE & RECYCLABLE

LIGHT, SAFE & RECYCLABLE LIGHT, SAFE & RECYCLABLE Your PET plastic egg carton is environmentally friendly. Not only is it recyclable but it contains recycled PET plastic, the same plastic used to manufacture plastic bottles and

More information

NO-CWC/CC-CNI/ AMC-DG -SETS /2016-17/ Date: 08.04.2016 SHORT NOTICE INVITATION QUOTATION

NO-CWC/CC-CNI/ AMC-DG -SETS /2016-17/ Date: 08.04.2016 SHORT NOTICE INVITATION QUOTATION CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking) Construction Cell, No-4, North avenue, Srinagar Colony, Saidapet, Chennai 600015. Ph: 22301372 : Fax: 22354140 NO-CWC/CC-CNI/ AMC-DG -SETS

More information

Sulphur in Nigerian Diesel

Sulphur in Nigerian Diesel Sulphur in Nigerian Diesel Aminu Jalal National Automotive Council, Abuja, Nigeria, At Sub-Regional Workshop on Sulphur Reduction in Vehicle Fuels, Cotonou, Benin, 9-10 March 2009 Outline Introduction

More information

UNIT 5: LUBRICATION AND COOLING SYSTEMS DIAGNOSIS AND REPAIR. A. Coolant Fluid that carries excessive heat from the engine.

UNIT 5: LUBRICATION AND COOLING SYSTEMS DIAGNOSIS AND REPAIR. A. Coolant Fluid that carries excessive heat from the engine. ENGINE REPAIR UNIT 5: LUBRICATION AND COOLING SYSTEMS DIAGNOSIS AND REPAIR LESSON 3: COOLING SYSTEM FUNCTION AND COMPONENTS I. Terms and definitions A. Coolant Fluid that carries excessive heat from the

More information

FlyMe Environmental impact assessment MHI/ 24-1-2007 Page 1(6) 2 Description and assessment of the Production process

FlyMe Environmental impact assessment MHI/ 24-1-2007 Page 1(6) 2 Description and assessment of the Production process Page 1(6) Fly Me CHAIR 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods

More information

Form 0.5 chair, 2805 and 2806

Form 0.5 chair, 2805 and 2806 Page 1(8) Form 0.5 chair, 2805 and 2806 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface

More information

5TH CATEGORY - HISTORIC RACING. GROUP Nb APPROVED VEHICLE SPECIFICATION

5TH CATEGORY - HISTORIC RACING. GROUP Nb APPROVED VEHICLE SPECIFICATION 5TH CATEGORY - HISTORIC RACING GROUP Nb APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with

More information

PROJECT PROFILE ON CEMENT CONCRETE HOLLOW BLOCKS

PROJECT PROFILE ON CEMENT CONCRETE HOLLOW BLOCKS PROJECT PROFILE ON CEMENT CONCRETE HOLLOW BLOCKS PRODUCT : Cement Concrete Hollow Blocks NIC CODE : 26959 (based on NIC 2004) PRODUCT CODE : 94459 (based on ASICC 2000) PRODUCTION CAPACITY : Quantity :

More information

AUTOMOBILE SERVICING STATION

AUTOMOBILE SERVICING STATION AUTOMOBILE SERVICING STATION A. INTRODUCTION: For the past one and a half decade the passenger car population has been steadily increasing. This is mainly because the Indian economy is now considerably

More information

(7) The Average Maturity Period of the Portfolio has been 65.70 months. HSBC FLOATING RATE FUND - LONG TERM PLAN (An Open-ended Income Scheme)

(7) The Average Maturity Period of the Portfolio has been 65.70 months. HSBC FLOATING RATE FUND - LONG TERM PLAN (An Open-ended Income Scheme) HSBC CAPITAL PROTECTION ORIENTED FUND - Series I - Plan I (A close-ended Capital Protection Oriented Scheme) N.A Power Finance Corporation Ltd.** CRISIL AAA 170 1,700.57 17.82 National Bank for Agriculture

More information

124: 2009 CEB SPECIFICATION

124: 2009 CEB SPECIFICATION 124: 2009 CEB SPECIFICATION SPECIFICATIONS FOR CREW CAB LONG WHEEL BASE CEYLON ELECTRICITY BOARD SRI LANKA Specification for CREW CAB LONG WHEEL BASE CEB Specification 124 : 2009 CEYLON ELECTRICITY BOARD

More information

Olefin and Polyolefin Markets in India Amit Chaturvedi

Olefin and Polyolefin Markets in India Amit Chaturvedi Olefin and Polyolefin Markets in India Amit Chaturvedi Senior Vice President & Head of Cracker Reliance Industries Ltd Forward Looking Statements This presentation contains forward-looking statements which

More information

PCM Moineau. Progressive Cavity Pumps I and ID Range. Fields of application. Benefits. I Serie. ID Serie. Performances

PCM Moineau. Progressive Cavity Pumps I and ID Range. Fields of application. Benefits. I Serie. ID Serie. Performances 7 rue Ernest Laval - BP 3-9273 Vanves Cedex France Tel (33) - Telex 3 F - Fax (33) nternet: pcmpompes.com Email: pcm@pcmpompes.com PCM Moineau Progressive Cavity Pumps and D Range Fields of application

More information

Rates of depreciation as per Companies Act, 1956

Rates of depreciation as per Companies Act, 1956 Rates of depreciation as per Companies Act, 1956 Nature of assets Single Shift Double Shift Triple Shift WDV SLM WDV SLM WDV SLM 1 2 3 4 5 6 7 I. (a) BUILDINGS (other than factory buildings) 5% 1.63% (b)

More information

Introduction of Die Casting Process

Introduction of Die Casting Process Introduction of Die Casting Process Editor: Sanjian What is Die Casting Die casting is a metal casting process that is characterized by forcing molten metal under high pressure into a mould cavity, which

More information

Industrial Equipment WASH DOWN AND CLEANING

Industrial Equipment WASH DOWN AND CLEANING Industrial Equipment WASH DOWN AND CLEANING PRODUCT INDEX The Pirtek range of Washdown Guns and Accessories provide a comprehensive selection of high performance water cleaning equipment for mobile and

More information

CHENNAI & TAMBARAM JURISDICTION W.E.F

CHENNAI & TAMBARAM JURISDICTION W.E.F CHENNAI & TAMBARAM JURISDICTION W.E.F. 15.11.014 ALPHABETS / CASES FALLING IN THE CATEGORIES JURISDICTION / PINCODES LOCATION (A) C ERSTWHILE COMPANY CASES A TO D COR.RG. 1 WB 6F 1 (A) - 1 C 1 I E TO J

More information

AUTO COMPONENTS AND Automobile Industry

AUTO COMPONENTS AND Automobile Industry 1 AUTO COMPONENTS AND Automobile Industry Auto Component Manufacturers Association of India estimates global auto component industry at US $ 1.2 Trillion in value, estimated to touch US $ 1.7 trillion

More information

INDUSTRY SALES REVIEW. July 2016

INDUSTRY SALES REVIEW. July 2016 INDUSTRY SALES REVIEW July 2016 1 P a g e This report analyses the trend of consumption of petroleum products in the country during the month of July, 2016. Data on product-wise monthly consumption of

More information

Winterizing Your Trailer and Storage Ideas

Winterizing Your Trailer and Storage Ideas Winterizing Your Trailer and Storage Ideas Basically winterizing is getting the water out of the pipes and tanks so that when it gets cold enough to freeze water, your unit won't be damaged from the expanding

More information

AUTOMOBILE WIRES 1. INTRODUCTION 2. MARKET POTENTIAL PRODUCT CODE QUALITY AND STANDARDS : IS: MONTH AND YEAR : May, 2014 OF PREPARATION

AUTOMOBILE WIRES 1. INTRODUCTION 2. MARKET POTENTIAL PRODUCT CODE QUALITY AND STANDARDS : IS: MONTH AND YEAR : May, 2014 OF PREPARATION AUTOMOBILE WIRES PRODUCT CODE : NA QUALITY AND STANDARDS : IS: 5836-1977 PRODUCTION CAPACITY : 6,000 Gross per annum MONTH AND YEAR : May, 2014 OF PREPARATION PREPARED BY : Sh. Mohd. Shahid Assistant Director

More information

Manufacturing of S.G. Iron Castings

Manufacturing of S.G. Iron Castings Manufacturing of S.G. Iron Castings PRODUCT CODE : 33115000 QUALITY AND STANDARDS : 1. BIS 1865:1974 2. BIS 5789:1970 S.G. Iron Castings for low temperature applications 3. BIS 5788:1970 S.G. Iron Castings

More information

Guideline for the Management of Waste Paint

Guideline for the Management of Waste Paint Guideline for the Management of Waste Paint 1 Introduction 1.1 Definitions 1.2 Characteristics 1.3 Potential Effects 2 Roles and Responsibilities 2.1 Environmental Protection Service 2.2 Generators 3 Waste

More information

MRK/ 1-12-2011 Page 1(9) 2 Description and assessment of the Production process. 3 Description and assessment of the Surface Treatment Methods

MRK/ 1-12-2011 Page 1(9) 2 Description and assessment of the Production process. 3 Description and assessment of the Surface Treatment Methods Page 1(9) Plus+ 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods 4

More information

WHATS IN - WHATS OUT? MUTUAL FUND UPDATE

WHATS IN - WHATS OUT? MUTUAL FUND UPDATE ARIHANT capital markets ltd. WHATS IN - WHATS OUT? MUTUAL FUND UPDATE Contents What s in - WHAT S OUT TOP PICKS OF THE MONTH MAJOR REDUCTIONS POPULAR STOCKS ACCROSS FUNDS CASH RICH FUNDS Visit us at: www.arihantcapital.com

More information

Internal trade: Wholesale trade sales of petroleum products P6151

Internal trade: Wholesale trade sales of petroleum products P6151 Internal trade: Wholesale trade sales of petroleum products P6151 April 1997 Embargo: 09:30 Date: 25 June 1997 Read the following notice with regard to the eleven official languages Copyright, 1997 Users

More information

Welcome. to the Delegates. from German Federal Environmental Agency (UBA)

Welcome. to the Delegates. from German Federal Environmental Agency (UBA) Welcome to the Delegates from German Federal Environmental Agency (UBA) Trushit Desai Executive Director Enpro Enviro Tech and Engineers Pvt. Ltd., Surat Overview of the textile industry in Gujarat Structure

More information