Pulp Bale Clamps and. Waste Paper Bale Clamps
|
|
- Arleen Richardson
- 7 years ago
- Views:
Transcription
1 Pulp Bale Clamps s KB-G...-1 s KS-G...- s B-PF...-4 s BC-PF...-5 s P...-6 s N...-7 Waste Paper Bale Clamps s KS-W...-8 s B-PU...-9 s BC-PW Pulp Bale Clamps, Rotating s KG-G s KG-GC Pulp Bale and Waste Paper Bale Clamps Technical Information Pulp Bale and Waste Paper Bale Clamps Accessories and Options Pulp Bale Clamps and Waste Paper Bale Clamps
2 Pulp Bale Clamps and Waste Paper Bale Clamps
3 Bale Clamps s KB-G Strong double T-profile frame. Commonly used for handling pulp bale in the paper industry, it s also used for cotton, wool, fabrics, tobacco and other similar products. Excellent visibility. Slim arms for easy knifing between bale stacks. The valve and the cylinder rods are protected in every opening position. Reduced weight, effective thickness and centre of gravity. Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D W HCG VCG LL U V P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm mm 38 KB 10 GA x400x5x A KB 10 G4A x400x30x A KB 10 G6A x400x30x A KB 14 GA x400x5x A KB 14 G4A x400x30x A KB 14 G6A x400x30x A KB 18 G4A x400x30x A KB 18 G6A x400x30x A KB 18 G8A x400x35x A KB G4A x400x30x A KB G6A x400x30x A KB G8A x400x35x A KB 5 G4B x400x30x A KB 5 G6B x400x30x A KB 5 GXB x400x35x A Side Visibility Central Visibility Ground Clearance Arm Toe-in Notes: E= arm thickness, without rib. T= arm thickness at the base, without rib. Standard fittings: One hydraulic function required. Pressure relief valve. Arms welded directly to the guides. Check valve with power regeneration hydraulic circuit (for KB 10 ). On request: Separate sideshift. Special openings. Pressure gauge. Load backrest. Independent arm control valve. Arms of various dimensions. Integral sideshift. -1
4 Pulp Bale Clamps s KS-G Strong double T-profile frame. Designed to specifically handle pulp bales. Excellent lateral visibility through the clamping arms. Slim arms for easy knifing between bale stacks. Reduced weight, effective thickness and centre of gravity. Wear bars to protect the frame and the arms. Integral sideshift to best position the load. Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D W HCG VCG LL U P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm 38 KS 18 G4A x400x30x A KS 18 G6A x400x30x A KS 18 G8A x400x35x A KS 18 G4A x400x30x A KS 18 G6A x400x30x A KS 18 G8A x400x35x A KS 3 G4B x450x40x A KS 3 G6B x450x40x A KS 3 G4B x450x40x A KS 3 G6B x450x40x A KS 3 G4B x450x40x A KS 3 G6B x450x40x A KS 3 G4B x450x40x A KS 3 G6B x450x40x A KS 3 G8B x450x45x A KS 40 G4B x450x40x A KS 40 G6B x450x40x A KS 40 G4B x450x40x A KS 40 G6B x450x40x A KS 40 G4B x450x40x A KS 40 G6B x450x40x A Side Visibility Ground Clearance Arm Toe-in -
5 Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D W HCG VCG LL U P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm 38 KS 40 G8B x450x45x A KS 40 G9B x450x45x A KS 40 G4B x450x40x A KS 40 G6B x450x40x A KS 40 G8B x450x45x A KS 40 G9B x450x45x A Side Visibility Ground Clearance Arm Toe-in Notes: E= arm thickness, without rib. T= arm thickness at the base, without rib. Standard fittings: Integral sideshift. Pressure relief valve. Arms welded directly to the guides. Check valve. Power regeneration hydraulic circuit (for models KS16) On request: Separate sideshift. Special openings. Pressure gauge. Load backrest. Independent arm control valve. Arms of various dimensions. Colorless arm finish. -3
6 Pulp Bale Clamps s B-PF Bale clamp for handling pulp bales. Aluminium profile frame, strong T-profile arm carriers. Bolted pulp bale arms. Colourless arm finish. Left arm pivoted. Slim and strong arm design ensures easy knifing and tight stacking. Built-in integral sideshift improves positioning. Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 B-400PF 1RH x A/4A B-400PF 14RH x A/4A B-400PF 16RH x A/4A B-400PF 1RJ x A/4A B-400PF 14RJ x A/4A B-400PF 16RJ x A/4A B-400PF 1TH x A/4A B-400PF 14TH x A/4A B-400PF 16TH x A/4A B-400PF 1TJ x A/4A B-400PF 14TJ x A/4A B-400PF 16TJ x A/4A B-400PF 1UH x A/4A B-400PF 14UH x A/4A B-400PF 16UH x A/4A B-400PF 1UJ x A/4A B-400PF 14UJ x A/4A B-400PF 16UJ x A/4A B-400PF 1VH x A/4A B-400PF 14VH x A/4A B-400PF 16VH x A/4A B-400PF 1VJ x A/4A B-400PF 14VJ x A/4A B-400PF 16VJ x A/4A Two hydraulic functions. Special opening ranges, arm lengths and arm finishes on request. External sideshift available. Independent arm movement extra. Please see page
7 Pulp Bale Clamps s BC-PF Bale clamp for handling pulp bales Colourless arms welded directly to the arm carriers Extremely thin and light design with optimal visibility Steel profile frame, strong T-profile arm carriers Left arm pivoted Slim arm design Built-in integral sideshift Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 BC-50PF 1TH A BC-50PF 14TH A BC-50PF 16TH A BC-50PF 1TJ A BC-50PF 14TJ A BC-50PF 16TJ A BC-50PF 1VH A BC-50PF 14VH A BC-50PF 16VH A BC-50PF 1VJ A BC-50PF 14VJ A BC-50PF 16VJ A BC-65PF 1H A BC-65PF 14H A BC-65PF 16H A BC-65PF 1J A BC-65PF 14J A BC-65PF 16J A BC-65PF 14H A BC-65PF 144H A BC-65PF 164H A BC-65PF 14J A BC-65PF 144J A BC-65PF 164J A Two hydraulic functions. Special opening ranges, arm lengths and arm finishes on request. External sideshift available. Independent arm movement extra. Please see page
8 Pulp Bale Clamps s P Heavy-duty pulp-bale clamp. Bolted pulp-bale arms. Left arm pivoted. Colourless arm finish. Slim and strong arm design ensures easy knifing and tight stacking. Built-in integral sideshift improves positioning. Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 P-800-S P P-800-L P-800-LS P-800-LT P-800-LU P P-1000-L P-1000-LS P-1000-LT P-100-LE x[ ] Price Two hydraulic functions. Special opening ranges, arm lengths and arm finishes on request. External sideshift available. Independent arm movement extra. Please see page -15. Arm lengths 100 mm or greater, left arm is pivoted. Consult Bolzoni Auramo regarding factory specifications. See page -16 for special mountings. These clamps (P-100LE) have a center arm. Internal sideshift is not available. -6
9 Pulp Bale Clamps s N Heavy-duty, pivoted arm, pulp-bale clamp designed to handle to 8 pulp-bale units. Open-frame design gives excellent visibility. Articulated arm design reduces overall clamp weight. Special pulp-bale arms. Colourless arm finish. Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 N-1000-S *[ ] 1400/ / N-1000-S *[ ] 1600/ / N *[ ] 1400/ / N *[ ] 1600/ / N-1000-L *[ ] 1400/ / N-1000-L *[ ] 1600/ / N-1300-S *[ ] 1400/ / N-1300-S *[ ] 1600/ / N *[ ] 1400/ / N *[ ] 1600/ / N *[ ] 1600/ / Special opening ranges, arm lengths and arm finishes on request. Consult Bolzoni Auramo regarding factory specifications. Special mounting required, see page
10 Waste Paper Bale Clamps s KS-W Strong double T-profile frame. Designed to specifically handle waste paper bales, it is also used to handle plastic and recicling materials. Excellent lateral visibility through the clamping arms. Slim arms for easy knifing between bale stacks. Reduced weight, effective thickness and centre of gravity. Wear bars to protect the frame and the arms. Integral sideshift to best position the load. Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D W HCG VCG LL U P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm 38 KS 18 W4A x400x30x A KS 18 W6A x400x30x A KS 18 W8A x400x35x A KS 3 W4B x450x40x A KS 3 W6B x450x40x A KS 3 W4B x450x40x A KS 3 W6B x450x40x A KS 3 W4B x450x40x A KS 3 W6B x450x40x A KS 3 W4B x450x40x A KS 3 W6B x450x40x A KS 3 W8B x450x45x A KS 40 W4B x450x40x A KS 40 W6B x450x40x A KS 40 W4B x450x40x A KS 40 W6B x450x40x A KS 40 W4B x450x40x A KS 40 W6B x450x40x A KS 40 W8B x450x45x A KS 40 W9B x450x45x A KS 40 W4B x450x40x A KS 40 W6B x450x40x A KS 40 W8B x450x45x A KS 40 W9B x450x45x A Side Visibility Ground Clearance Arm Toe-in Notes: E= arm thickness, without rib. T= arm thickness at the base, without rib. Standard fittings: Integral sideshift. Pressure relief valve. Arms welded directly to the guides. Check valve. On request: Separate sideshift. Special openings. Pressure gauge. Load backrest. Independent arm control valve. Arms of various dimensions. -8
11 Waste Paper Bale Clamps s B-PU Bale clamp for handling waste paper bales. Aluminium profile frame, strong T-profile arm carriers. Bale arms bolted to the arm carriers. Slim and strong arm design ensures easy knifing and tight stacking. Built-in integral sideshift improves positioning. Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 B-400PU 1RH x A/4A B-400PU 14RH x A/4A B-400PU 16RH x A/4A B-400PU 1RJ x A/4A B-400PU 14RJ x A/4A B-400PU 16RJ x A/4A B-400PU 1TH x A/4A B-400PU 14TH x A/4A B-400PU 16TH x A/4A B-400PU 1TJ x A/4A B-400PU 14TJ x A/4A B-400PU 16TJ x A/4A B-400PU 1VH x A/4A B-400PU 14VH x A/4A B-400PU 16VH x A/4A B-400PU 1VJ x A/4A B-400PU 14VJ x A/4A B-400PU 16VJ x A/4A Two hydraulic functions. Special opening ranges, arm lengths and arm finishes on request. Please see page
12 Waste Paper Bale Clamps s BC-PW Bale clamp for handling waste paper bales Colourless arms welded directly to the arm carriers Extremely thin and light design with optimal visibility Steel profile frame, strong T-profile arm carriers Both arms fixed Slim arm design Wear strips placed in the lower part of the frame and the arms Built-in integral sideshift Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 BC-50PW 1TH A BC-50PW 14TH A BC-50PW 16TH A BC-50PW 1TJ A BC-50PW 14TJ A BC-50PW 16TJ A BC-50PW 1VH A BC-50PW 14VH A BC-50PW 16VH A BC-50PW 1VJ A BC-50PW 14VJ A BC-50PW 16VJ A BC-65PW 1H A BC-65PW 14H A BC-65PW 16H A BC-65PW 1J A BC-65PW 14J A BC-65PW 16J A BC-65PW 14H A BC-65PW 144H A BC-65PW 164H A BC-65PW 14J A BC-65PW 144J A BC-65PW 164J A Two hydraulic functions. Special opening ranges, arm lengths and arm finishes on request. External sideshift available. Independent arm movement extra. Please see page -16. Consult Bolzoni Auramo -10
13 360 Rotating Bale Clamps s KG-G Strong double T-profile frame. 360 continuous rotation in both directions. Slim arms for easy knifing between bale stacks. Reduced weight, effective thickness and centre of gravity. Excellent visibility. Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D1 W HCG VCG LL U V P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm mm 38 KG 10 GA x400x5x A KG 10 G4A x400x30x A KG 10 G6A x400x30x A KG 14 GA x400x5x A KG 14 G4A x400x30x A KG 14 G6A x400x30x A KG 18 G4A x400x30x A KG 18 G6A x400x30x A KG 18 G8A x400x35x A KG G4A x400x30x A KG G6A x400x30x A KG G8A x400x35x A KG 5 G4B x400x30x A KG 5 G6B x400x30x A KG 5 GXB x400x35x A KG 3 G4B x450x40x /3 A KG 3 G6B x450x40x /3 A KG 3 G4B x450x40x /3 A KG 3 G6B x450x40x /3 A KG 3 G4B x450x40x /3 A KG 3 G6B x450x40x /3 A KG 3 G4B x450x40x /3 A KG 3 G6B x450x40x /3 A KG 3 G8B x450x40x /3 A Side Visibility Central Visibility Ground Clearance Arm Toe-in -11
14 360 Rotating Bale Clamps s KG-G Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D1 W HCG VCG LL U V P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm mm 38 EUR KG 40 G4B x450x40x A KG 40 G6B x450x40x A KG 40 G4B x450x40x A KG 40 G6B x450x40x A KG 40 G4B x450x40x A KG 40 G6B x450x40x A KG 40 G8B x450x40x A KG 40 G4B x450x40x A KG 40 G6B x450x40x A KG 40 G8B x450x40x A Side Visibility Central Visibility Ground Clearance Arm Toe-in Notes: 750 mm for ISO 38/A hooking; 850 mm for ISO 38/A hooking. during rotation depends on the clamping pressure and on the load. Standard fittings: Two hydraulic functions required. Double check valve. Arms welded directly to the guides. Pressure relief valve. Rotating centre. On request: Different openings. Load backrest. Pressure gauge. Arms of various dimensions. Separate sideshift. -1
15 360 Rotating Pulp Bale Clamps s KG-GC I B E LL HCG BP W Q L A The Bolzoni Auramo rotating pulp bale clamp model KG-GC class IV can safely transport various bales of cellulose pulp, cotton, wool and paper, etc. between the thin profile load arms (tight stacking possible) 360 continuous rotation in both directions. Slim arms for easy knifing between bale stacks. Reduced weight, effective thickness and center of gravity. Excellent visibility. Load Center Q BP B LxAxE I W HCG LL kg mm mm mm mm kg mm mm ISO-38 EUR KG 40 6G6C x400x /4 A KG 40 6G8C x400x /4 A Arm Dimensions Frame Center of Gravity Standard fittings: Two hydraulic functions required. Pressure relief valve. Wear-plates under the arms included. Reinforced wide gripping rods on inner arm facing. On request: Other arm dimensions and opening ranges. Various facings of inner arms. Separate sideshift. Solenoid valve. Solenoid valve control kit. Motor and brake protection. Special openings. Pressure gauge. Quick disconnect lower hooks. Bolt-on forks and different forks lengths. -13
16 Pulp Bale Clamps Waste Paper Bale Clamps Technical Information Oil flow rate recommendations Oil Flow Rate, Clamp Oil Flow Rate, Rotator Minimum Recommended Maximum Minimum Recommended Maximum l/min l/min l/min l/min l/min l/min Non-rotating clamps KB KB KB KB B BC P P P 100 X X X N X X X Rotating clamps KG KG KG KG KG 40 GC Hydraulic functions and hydraulic pressure recommendations Clamping Distributor Rotation Distributor Hydraulic Pressure Pressure Pressure Pressure Functions Minimum Maximum Maximum Minimum Maximum Maximum MPa MPa MPa MPa MPa MPa Non-rotating clamps KB ,0 16,0 3, KB ,5 16,0 3, KB 5 5,0 16,0 3, KB ,0 16,0 3, B 400 X 16,0 16, BC X 16,0 16, P 800 X 14,0 16, P 1000 X 14,0 16, P 100 X X X N X X X Rotating clamps KG ,0 16,0 3,0 10,0 1,0 5,0 KG 18-4,5 16,0 3,0 10,0 1,0 5,0 KG 5 5,0 16,0 3,0 10,0 1,0 5,0 KG ,0 16,0 3,0 10,0 1,0 5,0 KG 40 GC 10,0 15,0 3,0 13,0 17,0 5,0 X Consult Bolzoni Auramo for specifications -14
17 Pulp Bale Clamps Waste Paper Bale Clamps Accessories and Options Sideshift Options Integral Sideshift (Series KB Clamps only) Integral sideshift is actuated by hydraulically moving the clamping arms to the same direction. A special sideshift valve is required as well as one additional hydraulic function from the lift truck hydraulic system. Other technical properties of the clamp remain unchanged. Due to the operation principle, integral sideshift is not possible when the clamping arms are in a totally open Separate Sideshift (Series KB Clamps only) Separate sideshift requires a sideshift device to be mounted to the clamp body. A separate sideshifter provides a fixed amount of sideshift stroke regardless of the clamp opening. This enables faster and safer handling in confined spaces. A Bolzoni Auramo Series AS separate sideshifting mounting replaces the standard clamp mounting hooks and can be directly bolted onto the standard series KB clamps. Series AS sideshifters are light and have a minimized effective thickness. Therefore they ensure maximum lifting capacity for the lift truck. Sideshift stroke mm. Notes: One hydraulic function is required. Available with lower quick disconnect hooks. or closed position. Under certain conditions a sideshift exceeding ± 100 mm may be possible. Clamp models KB (all models) B (all models) BA (all models) P (all models) Minimum Carriage Width Q BP I D HCG FL W LL P F G X Y Z ISO kg mm mm mm mm mm kg mm mm mm mm mm mm mm 38 For Parallel Clamps AS KXA A AS KNA A AS 8 KXB A AS 40 KXB A Ground Clearance Upper Hook Width Ext. Lower Hook Width Lower Hook Width Rear Body Protrusion Cylinder Body Oil flow L/min Oil pressure MPa Hydraulic Functions Min Recom- Max Min Max Max to mended distributor AS AS Separate Sideshift (series KG clamps only) Consult Bolzoni Auramo regarding technical specifications. ISO 38 1 ISO 38 ISO
18 General Options Special opening ranges Special frame widths Special arm lengths Special arm heights Bolt-on arms Load backrest Special Ribs Dimples (Westwood-Version) Special wear bars Quick-Change Arms Quick-change arms enable fast and easy arm change. The clamp body can be used with several sets of different arms. The arm carriers and arms are fitted with special patented dove tail slides, which enable a simple arm change by simply slipping the arms off from the clamp body. Consult Bolzoni Auramo for technical specifications. Clamp body KB KB KB 3-40 Options Non-standard or special mountings are not included in the attachment price. All mounting prices are add-on prices. For non-standard mounting, detailed information is required from customer. ISO 38, B On request Quick-Change ISO 38 Lower Hooks Series KB / KG ISO 38 /3 Series B / BA / BP ISO 38 3/4 Non-standard mounting class ISO 38 -> 3 ISO > 4 ISO 38 -> 3 (QC) ISO > 4 (QC) Pin-Type mounting On request On request Lift truck capacity up to 7500 kg over 7500 kg Pulp Bale Clamps Waste Paper Bale Clamps Accessories and Options Terminal West mounting On request Integral mounting On request Wheel loader mountings adapters for wheel loader use. On request Hydraulic Options Hydraulic Couplings On request Installation Kit (Connection Hoses) On request Pressure relief valve Pressure relief valve for one hydraulic function. Choose this option if the lift truck hydraulic pressure exceeds the maximum connection pressure of the attachment. Number B, BA, P Independent arm control valve In some cases the arms must be capable of moving independently; this can be made possible by a special valve. KB B, BA, P Flow divider valve for synchronized arm movement Equal arm movement during clamping or opening. Provides equal oil flow to the clamping cylinders. On request Pressure gauge KB -16
ENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More informationCat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series
Cat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series Features Improved Machine Performance Unsurpassed Durability Increased Visibility Wide Range of Job Site Solutions Benefits
More informationENGINE POWERED 5-10t. ~ r"." - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100
HELl ENGINE POWERED 5-10t I; ~ r"." d- - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 STANDARD SPECIFICATION Manufacturer HUI HELl ca., LTD. Model CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 Load Capacity
More informationJCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationVOLVO WHEEL LOADERS BLOCK HANDLING
VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially
More informationUSE AND MAINTENANCE MANUAL
FORKS POSITIONER Mod. FR-FP-FFP ORIGINAL INSTRUCTIONS INTRODUCTION This manual includes instructions for assembly, maintenance (regular and extraordinary), and for possible faults with remedies. The instructions
More informationPanel Carts refer Page 112. 136 Intex Price Guide All prices are exclusive of GST
Panel Carts refer Page 112 136 Intex Price Guide All prices are exclusive of GST Cradle outriggers easily adjust Fast action single stage winch with silent cam lock brake Unique tilting cradle for easy
More informationPART 2 FORKLIFT HYDRAULIC SYSTEM
PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity
More informationAPPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More information*TTVF : 4&3*&4 $&/563 NCL2
2010 Public Use NCL2 NCL2 Features fully automatic NHTSA compliant lift, operated by an attendant loading position - either direction interfaces with OEM interlocks lift mounted lights - platform illuminated
More informationHyster Tire Handling Solutions. Complete Line of Fork Truck Mounted Tire Handlers
Hyster Tire Handling Solutions Complete Line of Fork Truck Mounted Tire Handlers A Model to Fit Any Application: Why Hyster/Greenfield Tire Handlers Designed specifically for lift trucks and OPTIMIZED
More informationRX 60 Technical data.
RX 60 Technical data. Electric forklift trucks RX 60-40 RX 60-45 RX 60-50 Achieve more. RX 60 Technical Data. This specification sheet to VDI Guidelines 2198 only gives the technical figures for the standard
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationDT 3000 SERIES. Specifications Double Stacker
DT 3000 SERIES Specifications Specifications Motors Performance Dimensions Tyres Weights General Information 1.1 Manufacturer Crown Equipment Corporation DT 3040-2.0 1.2 Model platform type without platform
More informationSKID STEER LOADER CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @
More informationHydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
More informationSkid Steer Loader CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm
More informationSPACIOUS CABIN TEMPERATURE TELESCOPIC
THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce
More informationElectric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60
Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60 Safety To adapt to different operating conditions and customer requirements, all performance parameters are adjustable.
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationSTATE OF NORTH CAROLINA 3950-3 DEPARTMENT OF ADMINISTRATION MARCH 10, 2010 PURCHASE AND CONTRACT DIVISION NEW ISSUE
STATE OF NORTH CAROLINA 3950-3 DEPARTMENT OF ADMINISTRATION MARCH 10, 2010 PURCHASE AND CONTRACT DIVISION SUPERSEDING NEW ISSUE SPECIFICATION FOR TRUCKS, FORKLIFT, ELECTRIC (This specification is released
More informationElectric Powered Forklift 1.5-2.0 ton
Electric Powered Forklift 1.5-2.0 ton E4 C4E150 C4E160-180 C4E160L-180L C4E200 www.bt-forklifts.com Electric Powered Forklift 1.5 ton Truck specifications C4E150 1.1 Manufacturer BT 1.2 Model C4E150 1.3
More informationS KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationIndustrial Cutting Equipment. includes new Concrete Crusher
Industrial Cutting Equipment includes new Concrete Crusher LUKAS Industrial Cutting Equipment The demand for environmentally-friendly disposal and recycling of used or discarded products within highly
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationCompetition 4 & 6 suspension Lift Toyota Landcruiser & nissan patrol
Competition 4 & 6 suspension Lift Toyota Landcruiser & nissan patrol Competition suspension Product Guidelines Guidelines for sale and recommendation of 4 (100mm) and 6 (150mm) Lifts for Toyota Landcruiser
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationEXPORT w w w. k r a n m a n. c o m
EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load
More informationCOIL PAC. Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se
COIL PAC Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se Description of the machine Coil Pac 240 und Coil Pac 400 are two types of
More informationToyota Hand Pallet Trucks
www.toyota-forklifts.eu Toyota Hand Pallet Trucks The BT Lifter Range BT Lifter the complete range of hand pallet trucks from Toyota Material Handling BT Lifter L-series Long-life hand pallet trucks BT
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationRX 50 Technical Data.
@ RX 50 Technical Data. Electric Forklift Truck RX 50-10 C RX 50-10 RX 50-13 RX 50-15 RX 50-16 2 RX 50 ELECTRIC FORKLIFT TRUCK. In accordance with VDI guidelines 2198, this specification applies to the
More informationThe right truck... the right fit.
4700 Series Lift Trucks The right truck... the right fit. Give your operators more comfort and confidence with the new 4700 Series four-wheel electric lift trucks from Raymond. The 4700 Series is easy
More informationexactly what is needed
JUNIOR For many years of low-maintenance drainpipe cleaning Of course you are familiar with the benefits of drainage in the field or in the greenhouse. Crops grow better and working conditions for preparing
More informationBringing good things ahead
Bringing good things ahead Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from
More informationVOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910
More informationDRUM ROLLER. FAR-1, Article No. B69-6300-A DRUM CART FOR 200 LITER STEEL DRUMS. Model FK 1029-1 FK 1029-3 FK 1029-2 FK 1029-4
DRUM ROLLER Suitable for drums up to 200 liter capacity Made from fire-galvanized sheet steel ø 610 mm, with 4 polyamide swiveling castors ø 75 mm Model FAR-1: closed version with welded leak-proof base,
More information5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model
More informationOwner s Manual Read and keep this manual. Patents World Wide
Owner s Manual Read and keep this manual. Patents World Wide S & S Industries, Inc., Sarasota, FL, USA www.trail-gator.com Copyright 2008 All Rights Reserved The following manual is provided to assist
More informationZAXIS series HYDRAULIC EXCAVATOR
ZAXIS series HYDRAULIC EXCAVATOR Model Code: ZX30 / ZX35 / ZX40 / ZX50 Engine Rated Power: 19.9 kw (26.7 HP) / 19.9 kw (26.7 HP) / 26.5 kw (35.5HP) / 26.5 kw (35.5HP) Operating Weight: 2 880-3 030 kg /
More informationRIGHT. www.wright-attachments.com
RIGHT www.wright-attachments.com RIGHT Wright Attachments is a family run Engineering Company that specialises in Material Handling Solutions, along side our popular range of attachments we have the knowledge
More informationSPILL CONTAINMENT PALLETS
SPI CONTAINMENT PAETS According to the regulations the storage of lubricant or fuel drums in industrial or workshop environments requires suitable containers which can collect the fluids in case of eventual
More informationLOADING DOCK EQUIPMENT. A. Section 03100 - Concrete Forms and Accessories: Placement of anchors into concrete.
LOADING DOCK EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Loading dock equipment of the following types: 1. Dock lifts. 2. Control stations. 1.2 RELATED SECTIONS A. Section 03100 - Concrete Forms and
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More informationE08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationDOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
More informationWorldwide network in over 40 countries.
Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers
More information1-800-295-5510 uline.com SPECIFICATIONS
H-1394, H-1395, H-1396 H-1397, H-3859, H-3860 π GRAVITY CONVEYOR 1-800-295-5510 uline.com SPECIFICATIONS Conveyor Bed Width In (mm) 18, 24, 30 (457, 610, 762) Load Capacity Per Linear Foot (305mm) Lbs
More information18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationHYDRAULIC EXCAVATOR. ZAXIS-2 series
ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable
More information2011-14 F250 6 RADIUS ARM KIT
92154000 Thank you for choosing Rough Country for your suspension needs. 2011-14 F250 6 RADIUS ARM KIT Rough Country recommends a certified technician installs this system. In addition to these instructions,
More informationMX R10 MX R16 MX R20 MX R28
FRONT LINKAGE MX R10 MX R16 MX R20 MX R28 User manual Please read carefully before using MX front linkage UK 361905 AC -1011 Original instructions Dear users, Thanks you for confidence in our product.
More informationDavcron Concrete Agitator - Operations Manual
Davcron Concrete Agitator - Operations Manual THE DAVCRON AGITATOR MUST BE OPERATED BY TRAINED AND AUTHORISED PERSONNEL ONLY DAVCRON ENGINEERING PTY LTD General Engineering & Maintenance Contractors -
More informationFDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
More informationThe CLIPPER Solutions
The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
More informationPC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
More informationTaps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Max Control TM Servo-Drive In-Die Tapping Units Taps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with
More informationUNITOR VACUUM cleaners
UNITOR VACUUM cleaners Unitor VCD15 a compact, heavy-duty dry vacuum cleaner for accommodation areas The smallest unit in the Unitor range, the VCD15 is purpose-made for use on cruise and passenger vessels.
More informationINTERLIFT ILR OWNERS MANUAL. INTERLIFT, INC. a member of MBB. 15939 Piuma Ave., Cerritos, CA 90703 Tel (888)-774-5844 Fax (562) 924-8318
INTERLIFT ILR OWNERS MANUAL INTERLIFT, INC. a member of MBB 15939 Piuma Ave., Cerritos, CA 90703 Tel (888)-774-5844 Fax (562) 924-8318 1 TABLE OF CONTENT PAGE TECHNICAL DESCRIPTION 3 GENERAL INFORMATION
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationFor the management of young forests, integrated harvesting, and removal of problem trees
EN Felling heads Energy wood heads Stroke harvesters uprooters For the management of young forests, integrated harvesting, and removal of problem trees Suitable for all base machines 1 Naarva offers a
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More informationCPS-3 Pallet Jack Scale
CPS-3 Pallet Jack Scale Operator Manual Thank you for purchasing the CAS CPS-3 Pallet Jack Scale. For your safety and correct operation of the scale, please read these instructions carefully before using
More information367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More informationHow To Use A Balancing Arm
Accessories for ergonomic workplaces Reliability Productivity Ergonomics Ecology Be demanding Don t be satisfied with the maximum Perfection is in your hands Naturally innovative Fiam accessories. A valuable
More information18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
More informationMODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
More informationFredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
More informationTechnical News Bulletin
Technical News Bulletin January 2003 Two-way air operated Funnel Mechanism 200-2100 Up-Stroke Cushion Control Valve Top-mounted Check Valve Increased Stroke Rigid Cam Cam Roller Fixation Page 1/5 1. Description
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
More information160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ)
160 ATJ 180 ATJ 160 ATJ 180 ATJ MANITOU, the world leader in materials handling, has the ability to accompany you on all types of terrain. The 160 and 180ATJ models have been developed to respond to all
More informationT53 SLAB BUNDLE EXTRACTOR ATTACHMENT
T53 SLAB BUNDLE EXTRACTOR ATTACHMENT APPLICATION AND OPERATING GUIDE Distributed By: UNIT LOAD HANDLING SYSTEMS, INC. 2301 SO. MISSION CIRCLE, FRIENDSWOOD, TX 77546 PH: 281-992-2006 FX: 281-992-2040 EM:
More informationVariety of Control Options Control is possible via wall switches, remote control systems or integration into building management systems.
Breezway Altair Powerlouvre Window 35 Breezway Altair Powerlouvre Window The Powerlourve Window motor is neatly concealed within the Easyscreen TM Frame or the Component Powerlouvre Head Section. Automated
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
More informationNew criteria of forklift trucks
Dimension Specification Identification 1.1 Manufacturer 1.2 Manufacturer s type designation 35D7E 40D7E 45D7E 50D7AE 1.3 Drive: electric (battery or mains),diesel,petrol,fuel gas,manual 1.4 Type of operation:hand,pedestrian,standing,,orderpicker
More informationTHE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS. New Model Presentation - VR85
THE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS New Model Presentation In this presentation, we will outline the innovations and technical advances integrated into the new 90 tonne metre crane of the Amco
More informationSSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
More informationINSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb
INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb NOTE: Progress Technology products should only be installed by a qualified licensed mechanic experienced in the installation
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationturning instead of measuring
PARAT -way-indexing-quickchange turret-toolpost turning instead of measuring Indexing accuracy 0,005 mm (0,0002 ) Internal and external operations in one setting Quick-clamping System with 0 Positions
More informationLifting bags. Trelleborg Ridderkerk BV
Lifting bags Trelleborg Ridderkerk BV Trelleborg The Company Introduction Trelleborg Ridderkerk is your partner in the design and production of engineered rubber products. Our focus is on the markets of
More information288 Range 24-28 tm. Technical data. www.hiab.com. Min. 4685 Max. 20970
HIAB 288 Range 24-28 tm Min. 4685 Max. 20970 2842 Technical data www.hiab.com HIAB XS 288 Contents Introduction...3 Safety Regulations...4 Disclaimer...4 Explanation of Symbols...4 Explanation of Diagrams...4
More informationProduct catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
More informationSELF-STEERING AXLE TABLE OF CONTENTS
SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -
More information7-SERIES PNEUMATIC 8,000 17,500 LBS
8,000 17,500 Truck Dimensions 11,000 17,500 Specifications 7FGAU/7FDAU50 L M N J I FS A H B C out 0.5 9.5 Capacity Center Capacity Center out 153.7 174. 100 100 2.4 15. 18.5 100 100 1.2 173.4 19 100 100
More informationREPAIR INSTRUCTIONS UNDER BODY CYLINDER (UM, UL)
Table of contents 1. Introduction... 3 1.1. Scope of use... 3 1.2. General remarks... 3 1.3. Contact Hyva... 3 1.4. Precautions... 4 1.5. Spare parts... 4 1.5.1. Prior to use... 4 1.6. Recycling and Reuse
More informationOCTOPUS SELECTION & INSTALLATION GUIDE
OCTOPUS SELECTION & INSTALLATION GUIDE 38mm BORE LINEAR ACTUATOR STYLES LAM & LAR A. GENERAL DESCRIPTION: The Octopus hydraulic linear actuator is a simple, efficient and reliable way of driving the rudder
More informationCESAB P200 1.4-2.5 tonne
CESAB P200 1.4-2.5 tonne Powered Pallet Trucks Effortless pallet handling another way CESAB ergonomics Tiller arm designed for optimum manoeuvrability, visibility and safety. Ambidextrous handle puts all
More informationSUPERYACHT SPARES. Nozzles and portable monitors. www.superyachtspares.com / info@superyachtspares.com / +31 183 639193
Nozzles and portable monitors Rosenbauer - Nozzles and portable monitors EN Maximum extinguishing effect. Minimal water consumption. The Rosenbauer nozzle enables the manual adjustment of the water flow
More informationStock List: >>Offset- Printing Machines
>>Offset- Printing Machines Heidelberg GTO-52+ - Single- colour sheet offset printing machine, - Printing format 36 cm x 52 cm, - Manufacturing year 1985, - Plus- Version, - 14 Mio. prints, - Conventional
More information