GPS Active Antenna. GPS active antenna (13*13*7 mm) CAN B ANTENNA PRODUCTS. 2008, June Rev.2. SH nr. TLL. SH/ 共頁 SUPER / 原圖編號 PAGE/ 頁

Transcription

1 ANTENNA PRODUCTS GPS Active Antenna (1*1*7 mm) 2008, June Rev.2 (1*1*7 mm) CAN B 1

2 GPS ACTIVE ANTENNA FOR GLOBAL POSITIONING SYSTEMS (1.7G Hz) Product Specification Ceramic Patch Antenna Outline Dimension: Ground Plane Central Frequency Impedance Gain VSWR Polarization Axis Ratio ** mm (Ceramic Patch) **0.1 mm 17 +/- MHz 0 Ohm 0 dbi (Elevation 90 degree) 2.0 max Right Hand Circular Polarization db max. (Elevation 90 degree) LNA Central Frequency Gain Noise Figure 17 +/- MHz 17 +/- 1 db (at f c, without SAW filter) 1. db typ. (at f c, 1.8dB Max) Output VSWR 2.0 (at f c ) Supply Voltage Current Consumption Output Impedance. + /- % V 6 ma 0 Ohm Operating Temperature/midity ; < 9% Storage Temperature (1*1*7 mm) CAN B 2

3 Description: Yageo provides an ideal active GPS antenna for your embedded system applications. With 1 x 1 x 7. mm in size, it best fit into your GPS system with maximum performance. Key Features: Small form factor: 1 x 1 x 7. mm Lead-Free RoHS/WEEE compliant High gain up to 17 db Low power consumption I-Pex, Herose, MMCX connector are available. Applications: Handheld devices Automotive and Marine Navigation Automotive Navigator Tracking Emergency Locator Geographic Surveying Personal Positioning Sporting and Recreation Embedded applications: PDA, DSC, Smart phone, UMPC, PND, MP (1*1*7 mm) CAN B

4 Antenna Return Loss and Impendence (with 0 * 0 mm square Ground Plane) (1*1*7 mm) CAN B

5 2D Circular gain measurement (with 0 *0 mm square Ground Plane) Circular gain 2D x-z plane pattern Circular gain 2D y-z plane pattern (1*1*7 mm) CAN B

6 D Circular gain measurement (1*1*7 mm) CAN B 6

7 Circular gain 2D pattern for AR measurement Circular gain 2D x-z plane pattern Circular gain 2D y-z plane pattern (1*1*7 mm) CAN B 7

8 The Characteristics of LNA db SoftPlot for Microwave Office S22 S11 S S GHz db 2 S GHz db S GHz db Start: GHz Stop: GHz 2007//21 PM :02: LNA_B1_1.spt 877D NF=1. db (1*1*7 mm) CAN B 8

9 Outlines and Dimension Dimension Length Width Thickness Cable Connector Shielding Case 1.0 +/- 0. mm 1.0 +/- 0. mm 7. +/- 0. mm Diameter D = 1.1 mm; Length L = 100 mm I-pex *10*2 mm 10 (1*1*7 mm) CAN B 9

10 ORDERING INFORMATION: The active antennas may be ordered by using the Yageo ordering code. numbers can be determined by the following rules: These code CAN B F C M S T A P F. Family Code CAN = Antenna C. Packing Type Code 1 = bulk packaging M. Materials Code = Microwave Ceramic Material S. Size code = 1*1 mm T. Type 86 =, type 86 ( 1 stage LNA) A. Working Frequency 18 = 1.7 GHz, GPS application P. Packing Type Code 1B = bulk packaging (1*1*7 mm) CAN B 10

11 Packing information 1. Each unit into individual compartment. Two layers of compartment units per compartment layer. 200 units into one carton.. Cartoon dimension: 9*27*167 mm. Cover upper and lower sides of the box with a cardboard. (1*1*7 mm) CAN B 11

12 Revision Control: Revision Date Content Remark 1 March, 2007 New Issued 2 June, 2008 Modify shielding case dimension (1*1*7 mm) CAN B