Metallized Polypropylene Film Capacitor AC Filtering Radial Type

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Metallized Polypropylene Film Capacitor AC Filtering Radial Type"

Transcription

1 Metallized Polypropylene Film Capacitor AC Filtering Radial Type FEATURES High peak current capabilities Long lifetime Material categorization: for definitions of compliance please see APPLICATIONS AC filtering UPS systems Renewable energy - grid interface Harmonic filter Welding equipment QUICK REFERENCE DATA Rated capacitance range 1 μf to 70 μf Capacitance tolerance ± 5 % and 10 % AC voltage range, U N 30 V AC, 50 V AC, 75 V AC, 310 V AC, 350 V AC, 0 V AC Climatic testing class 0/85/56 Maximum application temperature 105 C Maximum permissible case temperature 105 C Reference standards IEC 61071, IEC Dielectric Polypropylene film Electrodes Metallized dielectric film Construction Mono and internal serial construction Encapsulation Plastic case sealed with resin; flame retardant Terminals Tinned wire Self inductance (L S ) < 1 nh per mm of lead spacing Withstanding DC voltage between terminals (1) 1.5 U NDC for 10 s, cut off current 10 ma, rise time 1000 V/s Insulation resistance RC between leads, after 1 min > s Measuring voltage: 500 V Life time expectancy Marking Useful lifetime: > h at U N FIT: < 10 x 10-9 /h (10 per 10 9 component hours) at 0.5 x U N, 0 C C-value; tolerance; rated voltage; code for dielectric material; code for manufacturing origin; manufacturer s type designation; manufacturer location, year and week; manufacturer s logo or name Notes For more detailed data and test requirements, contact For general information like characteristics and definitions used for film capacitors follow the link: (1) See document Voltage Proof Test for Metalized Capacitors ( AC VOLTAGE RATINGS (V RMS ) U N 30 V 50 V 75 V 310 V 350 V 0 V V RMS at 85 C 30 V 50 V 75 V 310 V 350 V 0 V V RMS at 105 C 160 V 175 V 190 V 10 V 0 V 300 V Revision: -Sep-1 1 Document Number: 817

2 COMPOSITION OF CATALOG NUMBER MULTIPLIER (nf) CAPACITANCE (numerically) 10 Example nf 1. µf nf 1 µf nf 80 µf MKP P PITCH CODE 7.5 K 37.5 P 5.5 Y TYPE CONSTRUCTION METALLIZED POLYPROPYLENE VOLTAGE U N = 3 = 30 V RMS U N = 5 = 50 V RMS U N = 7 = 75 V RMS U N = 31 = 310 V RMS U N = 35 = 350 V RMS U N = 38 = 380 V RMS U N = = 0 V RMS TOLERANCE ± 5 % 5 ± 10 % SPECIAL CODE FOR TERMINAL pins pins P = 10. mm 5 pins P = 0.3 mm (1) Customized Note (1) Tabs terminals or customized terminals are available on request DIMENSIONS in millimeters w I h 6-1 Ø dt ± 0. - PCM 7.5 mm ± PCM 37.5 mm I w P P Marking h Ø dt 6 - ± 0.5 P ± 0.5 Note Ø dt ± 10 % of standard diameter specified Revision: -Sep-1 Document Number: 817

3 ELECTRICAL DATA AND ORDERING CODE U RAC (V) CAP. (1) (μf) DIMENSION () w h l P dv/dt (3) (V/μs) I PEAK I RMS () tan 1 khz (< 10 - ) (5) tan 10 khz (< 10 - ) (5) ORDERING CODE (6) U NDC = 50 V; U RMS AT 85 C= 30 V AC ; U RMS AT 105 C = 160 V AC MK875103K MK87503K MK875303K MK87503K MK875503K MK875603K MK875703K MK875803K MK875903K MK876103K MK876103P* MK87613P* MK876153P* MK87603P* MK8763P* / MK87653P* / MK876303P* MK876303Y* MK876353Y* MK87603Y* MK87653Y* MK876503Y* MK876553Y* MK876603Y* MK876653Y MK Y5 U NDC = 500 V; U RMS AT 85 C = 50 V AC ; U RMS AT 105 C = 175 V AC MK875105K MK87505K MK875305K MK87505K MK875505K MK875605K MK875705K MK875805K MK875905K MK875505P* MK875605P* MK875705P* MK875805P* MK875905P* MK876105P* MK87615P* MK876155P* Revision: -Sep-1 3 Document Number: 817

4 ELECTRICAL DATA AND ORDERING CODE U RAC (V) CAP. (1) (μf) DIMENSION () w h l P dv/dt (3) (V/μs) I PEAK I RMS () tan 1 khz (< 10 - ) (5) tan 10 khz (< 10 - ) (5) ORDERING CODE (6) U NDC = 500 V; U RMS AT 85 C = 50 V AC ; U RMS AT 105 C = 175 V AC / MK87605P* / MK8765P* / MK87655P* MK876155Y* MK87605Y* MK8765Y* MK87655Y* MK876305Y* MK876355Y* MK87605Y* MK87655Y* MK876505Y* MK876555Y MK Y5 U NDC = 600 V; U RMS AT 85 C = 75 V AC ; U RMS AT 105 C = 190 V AC MK875107K MK87507K MK875307K MK87507K MK875507K MK875607K MK875707K MK875507P* MK875607P* MK875707P* MK875807P* MK875907P* MK876107P* MK87617P* MK876157P* / MK87607P* MK876157Y* MK87607Y* MK8767Y* MK87657Y* MK876307Y* MK876357Y* MK87607Y* MK87657Y MK Y5 Revision: -Sep-1 Document Number: 817

5 ELECTRICAL DATA AND ORDERING CODE U RAC (V) CAP. (1) (μf) DIMENSION () w h l P dv/dt (3) (V/μs) I PEAK I RMS () tan 1 khz (< 10 - ) (5) tan 10 khz (< 10 - ) (5) ORDERING CODE (6) U NDC = 630 V; U RMS AT 85 C = 310 V AC ; U RMS AT 105 C = 10 V AC MK K MK875031K MK K MK875031K MK K MK P* MK P* MK P* MK P* MK P* MK P* MK876131P* / MK P* MK Y* MK876131Y* MK Y* MK876031Y* MK87631Y* MK876531Y* MK Y MK Y5 U NDC = 700 V; U RMS AT 85 C = 350 V AC ; U RMS AT 105 C = 0 V AC MK K MK875035K MK K MK875035K MK P* MK P* MK P* MK P* MK P* MK P* / MK876135P* MK Y* MK876135Y* MK Y* MK876035Y* MK87635Y* MK876535Y* MK Y5 Revision: -Sep-1 5 Document Number: 817

6 ELECTRICAL DATA AND ORDERING CODE U RAC (V) 0 CAP. (1) (μf) DIMENSION () w h l P U NDC = 1000 V; U RMS AT 85 C = 0 V AC ; U RMS AT 105 C = 300 V AC MK87510P* MK87515P* MK8750P* MK875P* / MK87530P* / MK87533P* / MK8750P* MK87550P* MK87550Y* MK87560Y* MK87570Y* MK87580Y* MK87580Y* MK87610Y* MK8761Y5 Notes (1) Intermediate capacitance values available on request () Standard dimension dv/dt (3) (V/μs) I PEAK I RMS () (3) Rated voltage pulse slope (du/dt) R at voltage U NDC () Maximum RMS current at 10 khz, +85 C, capacitance tolerance specified (5) The ESR (Equivalent Series Resistance) can be calculated as tan (f)/( x x f x C) (6) Change the * symbol with special code for the terminals tan 1 khz (< 10 - ) (5) tan 10 khz (< 10 - ) (5) ORDERING CODE (6) PACKAGING INFORMATION U RMS (V) 30 CAP. (1) (μf) Ø dt ORDERING CODE () MASS (g) SPQ (3) (pcs) MK875103K MK87503K MK875303K MK87503K MK875503K MK875603K MK875703K MK875803K MK875903K MK876103K MK876103P* MK87613P* MK876153P* MK87603P* MK8763P* MK87653P* MK876303P* MK876303Y* MK876353Y* MK87603Y* MK87653Y* MK876503Y* MK876553Y* MK876603Y* MK876653Y MK Y Revision: -Sep-1 6 Document Number: 817

7 PACKAGING INFORMATION U RMS (V) CAP. (1) (μf) Ø dt ORDERING CODE () MASS (g) SPQ (3) (pcs) MK875105K MK87505K MK875305K MK87505K MK875505K MK875605K MK875705K MK875805K MK875905K MK875505P* MK875605P* MK875705P* MK875805P* MK875905P* MK876105P* MK87615P* MK876155P* MK87605P* MK8765P* MK87655P* MK876155Y* MK87605Y* MK8765Y* MK87655Y* MK876305Y* MK876355Y* MK87605Y* MK87655Y* MK876505Y* MK876555Y MK Y MK875107K MK87507K MK875307K MK87507K MK875507K MK875607K MK875707K MK875507P* MK875607P* MK875707P* MK875807P* MK875907P* MK876107P* MK87617P* MK876157P* MK87607P* MK876157Y* MK87607Y* MK8767Y* MK87657Y* MK876307Y* MK876357Y* MK87607Y* MK87657Y MK Y Revision: -Sep-1 7 Document Number: 817

8 PACKAGING INFORMATION U RMS (V) CAP. (1) (μf) MK K MK875031K MK K MK875031K MK K MK P* MK P* MK P* MK P* MK P* MK P* MK876131P* MK P* MK Y* MK876131Y* MK Y* MK876031Y* MK87631Y* MK876531Y* MK Y MK Y MK K MK875035K MK K MK875035K MK P* MK P* MK P* MK P* MK P* MK P* MK876135P* MK Y* MK876135Y* MK Y* MK876035Y* MK87635Y* MK876535Y* MK Y MK87510P* MK87515P* MK8750P* MK875P* MK87530P* MK87533P* MK8750P* MK87550P* MK87550Y* MK87560Y* MK87570Y* MK87580Y* MK87590Y* MK876105Y* MK87615Y Notes (1) Intermediate capacitance values available on request () Change the * symbols with special code for terminals (3) SPQ = Standard Packing Quantity Ø dt ORDERING CODE () MASS (g) SPQ (3) (pcs) Revision: -Sep-1 8 Document Number: 817

9 CONSTRUCTION Low inductive wound cell elements of metallized polypropylene film, potted with resin in a flame retardant case. Specific Method of Mounting to Withstand Vibration and Shock The capacitor unit is designed for mounting on a printed circuit board. In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit board. The capacitors shall be mechanically fixed by the leads and the body clamped. Space Requirements on Printed-Circuit Board The maximum length and width of film capacitors is shown in the figure. Product height with seating plane as given by IEC as reference: W max. P x P ± 0.5 mm 3 x P ± 0.5 mm x P ± 0.5 mm 5 x P ± 0.5 mm L max. Ø D L max. W max. Ø D h 7.5 l + w l + 3 w l + w SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the document: Characteristics and Definitions used for Film Capacitors : Storage Temperature T stg = -5 C to +35 C with RH maximum 75 % without condensation. Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 3 C ± 1 C, an atmospheric pressure of 86 kpa to 106 kpa and a relative humidity of 50 % ± %. For reference testing, a conditioning period shall be applied over 96 h ± h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 0 %. Revision: -Sep-1 9 Document Number: 817

10 CHARACTERISTICS ΔC/C (%) RC (s) T amb ( C) Capacitance as a function of ambient temperature (typical curve) T amb ( C) Insulation resistance as a function of ambient temperature (typical curve) Factor Pitch 7.5 mm µf Z (Ω) µf T amb ( C) RMS voltage in function of temperature f (Hz) Impedance vs.frequency (typical curve) 10.0 Pitch 37.5 mm 10.0 Pitch 5.5 mm Z (Ω) µf Z (Ω) µf 30 µf 70 µf f (Hz) 10 7 Impedance vs. frequency (typical curve) f (Hz) 10 7 Impedance vs. frequency (typical curve) Revision: -Sep-1 10 Document Number: 817

11 HEAT CONDUCTIVITY DIMENSIONS HEAT CONDUCTIVITY (mw/ C) w h l PITCH 7.5 mm PITCH 37.5 mm PITCH 5.5 mm Power Dissipation and Maximum Component Temperature Rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (T) can be measured or calculated by T = P/G: T = component temperature rise ( C) with a maximum of 15 C P = power dissipation of the component (mw) G = heat conductivity of the component (mw/ C) MEASURING THE COMPONENT TEMPERATURE Thermocouple The case temperature is measured in unloaded (T amb ) and maximum loaded condition (T C ). The temperature rise is given by T = T C - T amb. To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation. APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: The peak voltage (U P+ ) shall not be greater than x U RMS The peak-to-peak ripple voltage (U PP ) shall not be greater than x x U RMS The voltage pulse slope (du/dt) shall not exceed the rated pulse slope at the DC voltage rating. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by U NDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T du x dt x dt U x du NDC dt rated 0 T is the pulse duration The maximum component surface temperature must be lower than 105 C and maximum temperature rise between case and free air ambient shall be lower than 15 C. Revision: -Sep-1 11 Document Number: 817

12 INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the Sectional Specification, Publication IEC SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS ROUTINE TEST-FINAL INSPECTION External inspection, visual examination Legible marking as specified Dimensions See specification drawing Capacitance 1 khz at room temperature See specific reference data 5.3. tan 1 khz at room temperature 10 khz at room temperature See specific reference data Voltage test between terminal 1.5 x U NDC at T amb Duration 10 s 5.7 Insulation resistance Measuring voltage 100 V at room temperature No visible damage or puncture No flashover See specific reference data Duration 1 min TYPE TESTS 5.1. External inspection Check for finish, marking and overall dimensions Legible marking and finish as specified Dimensions: see specific drawing Initial measurements Capacitance at 1 khz tan at 10 khz Robustness of terminations IEC Resistance to soldering heat IEC Tensile Ua1 Wire diameter Section Load 0.8 mm 0.5 mm 10 N 1.5 mm 1. mm 0 N Duration 10 s ± 1 s Bending Ub method 1 Wire diameter Section Load 0.8 mm 0.05 mm 3 10 N 1.5 mm mm 3 0 N x 90, Duration s to 3 s/bend No predrying, method 1A Solder bath: 80 C Duration 10 s ± 1 s 5.1. Final measurements Capacitance tan Initial measurements Capacitance at 1 khz tan at 10 khz C/C 0.5 % Increase of tan Compared to values measured in Vibration IEC Hz to 55 Hz: Amplitude ± 0.35 mm or acceleration 98 m/s Test duration: 10 frequency cycles, 3 axes offset from each other by 90 1 octave/min Visual examination No visible damage Revision: -Sep-1 1 Document Number: 817

13 SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS Shock or impact IEC Pulse shape: half sine Acceleration: 90 m/s Duration of pulse: 11 ms Visual examination No visible damage 5.1. Final measurements Capacitance tan Initial measurements Capacitance at 1 khz tan at 10 khz R insulation C/C 0.5 % Increase of tan Compared to values measured in DC voltage test between terminal 1.5 x U NDC at T amb Duration 60 s Final measurements Capacitance tan R insulation Initial measurements Capacitance at 1 khz tan at 10 khz C/C 0.5 % Increase of tan R insulation 50 % of specified values 5.9. Surge discharge test 1.1 x U NDC Number of discharges: 5 Time lapse: every min (10 min total) DC voltage test between terminal Within 5 min after the surge discharge test Duration 10 s 1.5 x U NDC at T amb Final measurements Capacitance tan at 10 khz Initial measurements Capacitance at 1 khz tan at 10 khz Self healing test 1.5 x U NDC Duration 10 s Number of clearings 5 Clearing = voltage drop of 5 % Increase the voltage at 100 V/s till 5 clearings occur with a max. of.5 x U NDC for a duration of 10 s Final measurements Capacitance tan Initial measurements Capacitance at 1 khz tan at 10 khz C/C 1.0 % tan 1. initial tan Compared to values measured in C/C 0.5 % tan 1. x initial tan Compared to values measured in Change of temperature acc. to IEC Damp heat steady state acc. to IEC Test Nb T max. = 85 C T min. = -0 C Transition time: 1 h, equivalent to 1 C/min 5 cycles Test Ca T = 0 C ± C RH = 93 % ± 3 % Duration 56 days DC voltage test between terminal 1.5 x U NDC at ambient temperature Duration 10 s Revision: -Sep-1 13 Document Number: 817

14 SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS Final measurements Visual examination No puncturing or flashover Self healing punctures are permitted Capacitance tan at 10 khz Initial measurements Capacitance at 1 khz tan at 10 khz C/C.0 % Increase of tan Compared to values measured in Thermal stability test under overload conditions Natural cooling T amb ± 5 C 1.1 x P max. = (U /) x W x C x tan = 11 x (I max. /W x C) x tan with W = x x f for I max. (see specific reference data) f = 10 khz Duration 8 h Final measurements Measure the temperature every 1.5 h during the last 6 h Capacitance tan at 10 khz 5.1 Resonance frequency Impedance analyser at T amb measurement Initial measurements Capacitance at 1 khz tan at 10 khz Temperature rise < 1 C C/C % Increase of tan 1. x initial < 0.9 times the value as specified in typical curve Resonant frequency of this specification Endurance test between terminals Sequence 1.5 x U N at T max. = 85 C 1.0 x U N at T max. = 105 C Duration 500 h 1000 x discharge at 1. x î (maximum repetitive peak current in continuous operation) 1.5 x U N at T max. = 85 C 1.0 x U N at T max. = 105 C Final measurements Duration 500 h Capacitance tan Initial measurements Capacitance at 1 khz C/C 3 % Increase of tan Compared to values measured in Destruction test sequence High DC voltage test High DC voltage test (limited to 00 ma) The capacitors must be put in an oven at T max. = 105 C/ h and cooled down Product enveloped with cheese cloth 3 x U NDC with minimum 000 V DC Duration 1 min Discharge the capacitor Duration 1 min AC RMS voltage = U NDC / x Duration = 15 s High AC voltage test The above sequence shall be repeated until the test sample capacitance loss 5 % of its initial measurement in Final measurements Visual examination No burning of the cheese cloth. The dielectric must withstand the test sequence conducted. Revision: -Sep-1 1 Document Number: 817

15 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000

Metallized Polypropylene Film Capacitors DC-Link Capacitor

Metallized Polypropylene Film Capacitors DC-Link Capacitor Metallized Polypropylene Film Capacitors DC-Link Capacitor FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability, low ESR,

More information

AC and Pulse Film Foil Capacitors KP Radial Potted Type

AC and Pulse Film Foil Capacitors KP Radial Potted Type AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

DC Film Capacitors MKT Axial Type

DC Film Capacitors MKT Axial Type MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS

More information

Metallized Polyester Film Capacitors MKT Radial Epoxy Partly Lacquered Type

Metallized Polyester Film Capacitors MKT Radial Epoxy Partly Lacquered Type Metallized Polyester Film Capacitors MKT Radial Epoxy Partly Lacquered Type FEATURES Partly lacquered product Pitch 10 mm to 22.5 mm available loose in box Material categorization: For definitions of compliance

More information

Interference Suppression Film Capacitors MKP Radial Potted Type

Interference Suppression Film Capacitors MKP Radial Potted Type Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 7.5 mm to 27.5 mm lead pitch Supplied loose in box, taped on reel Material categorization: For definitions of compliance please

More information

Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability

Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type FEATURES 5.08 mm lead pitch Supplied loose in box, taped on ammopack or reel AEC-Q200 qualified (rev. D) Material categorization: for definitions of compliance

More information

Aluminum Electrolytic Capacitors Axial Miniature, Long-Life

Aluminum Electrolytic Capacitors Axial Miniature, Long-Life Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38

More information

Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring

Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to

More information

Aluminum Electrolytic Capacitors Power Economic Printed Wiring

Aluminum Electrolytic Capacitors Power Economic Printed Wiring Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated

More information

Metallized polyester film capacitors MKT 370/371/372/373

Metallized polyester film capacitors MKT 370/371/372/373 Metallized polyester film capacitors MKT 370/37/372/373 MKT RADIAL POTTED CAPACITORS PITCH /7.///22./27. mm 2222 370 2222 37 2222 372 2222 373 CBA Fig. Simplified outlines. FEATURES Low-inductive wound

More information

Aluminum Capacitors Solid Axial

Aluminum Capacitors Solid Axial SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range

More information

DC Film Capacitor MKT Radial Potted Type

DC Film Capacitor MKT Radial Potted Type MKT 370 l w FEATURES Available taped and loose in box RoHS compliant h ENCAPSULATION Flame retardant plastic case and epoxy resin (UL-class 94 V-0) P ± 0.3 Dimensions in mm l t Ø d t CLIMATIC TESTING CLASS

More information

Lead (Pb)-free Commodity Thick Film Chip Resistors

Lead (Pb)-free Commodity Thick Film Chip Resistors Lead (Pb)-free Commodity Thick Film Chip Resistors FEATURES High volume product suitable for commercial applications Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free

More information

Green Thick Film Chip Resistors

Green Thick Film Chip Resistors Green Thick Film Chip Resistors FEATURES Green resistor - does not use RoHS exemptions Stability R/R = 1 % for 1000 h at 70 C 2 mm pitch packaging option for 0603 size Material categorization: for definitions

More information

Interference Suppression Film Capacitors MKP Radial Potted Type

Interference Suppression Film Capacitors MKP Radial Potted Type MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors 168x12(halfpage) l P Dimensions in mm Note (1) F - F < 0.3 mm F = 7.5 mm + 0.6 mm/- 0.1 mm APPLICATIONS For standard line bypass

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760

More information

SMD Aluminum Solid Capacitors with Conductive Polymer

SMD Aluminum Solid Capacitors with Conductive Polymer SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package

More information

Standard Metal Film Leaded Resistors

Standard Metal Film Leaded Resistors Standard Metal Film Leaded Resistors FEATURES Small size (SFR16S: 0204, SFR25 / SFR25H: 0207) Low noise (max. 1.5 μv/v for R > 1 M ) Compatible to both lead (Pb)-free and lead containing soldering processes

More information

50 W Power Resistor, Thick Film Technology, TO-220

50 W Power Resistor, Thick Film Technology, TO-220 50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material

More information

Electrical Double Layer Energy Storage Capacitors Power and Energy Versions

Electrical Double Layer Energy Storage Capacitors Power and Energy Versions Electrical Double Layer Energy Storage Capacitors Power and Energy Versions FEATURES Polarized energy storage capacitor with high capacity and energy density Energy version with high stability available

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 400 V AC / Class Y4, 125 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 400 V AC / Class Y4, 125 V AC AC Line Rated Ceramic Disc Capacitors Class X1, V AC / Class Y4, 125 V AC FEATURES Complying with IEC 6384-14 3 rd edition High reliability Complete range of capacitance values Radial leads Singlelayer

More information

Pulse Proof Thick Film Chip Resistors

Pulse Proof Thick Film Chip Resistors Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal

SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode

More information

Standard Thick Film Chip Resistors

Standard Thick Film Chip Resistors Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free

More information

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC 4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)

Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at

More information

Surface Mount Multilayer Ceramic Chip Capacitors for High Temperature Applications

Surface Mount Multilayer Ceramic Chip Capacitors for High Temperature Applications Surface Mount Multilayer Ceramic Chip Capacitors for High Temperature Applications ELECTRICAL SPECIFICATIONS Electrical characteristics at +25 C unless otherwise specified. FEATURES Specialty: high temperature

More information

High Ohmic/High Voltage Metal Film Leaded Resistors

High Ohmic/High Voltage Metal Film Leaded Resistors , High Ohmic/High Voltage FEATURES Metal film technology High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Compliant

More information

Power Resistor Thick Film Technology

Power Resistor Thick Film Technology Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES

More information

Fusible, Non-Flammable Metal Film Leaded Resistors

Fusible, Non-Flammable Metal Film Leaded Resistors Fusible, Non-Flammable Metal Film Leaded Resistors DESCRIPTION A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned

More information

Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors

Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors FEATURES Stability ΔR/R = 1 % for 00 h at 70 C Lead (Pb)-bearing termination plating on Ni barrier layer Metal glaze on high quality ceramic Halogen-free according to IEC 61249-2-21 definiton AEC-Q200

More information

Pulse Proof, High Power Thick Film Chip Resistors

Pulse Proof, High Power Thick Film Chip Resistors Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent

More information

High Voltage Surge Resistor

High Voltage Surge Resistor High Voltage Surge Resistor A metal glazed film is deposited on a high grade ceramic body. After that caps are applied to the rods and tinned electrolytic copper wires are welded to these end caps. The

More information

Metallized Polyester PCMT 365/366/367 film capacitors

Metallized Polyester PCMT 365/366/367 film capacitors Metallized Polyester PCMT 365/366/367 MKT RADIAL LACQUERED CAPACITORS (Dipped Type) - Orange Pitch 5.0/7.5mm 365 366 367 QUICK REFERENCE DATA acitance range (E12 series) 0.001 to 1.0μF acitance tolerance,

More information

Precision Surface Mount Resistors Wirewound or Metal Film Technologies

Precision Surface Mount Resistors Wirewound or Metal Film Technologies Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)

More information

Hybrid Energy Storage Capacitors

Hybrid Energy Storage Capacitors Hybrid Energy Storage Capacitors 96 HVC ENYCAP Image is not to scale EATURES Polarized energy storage capacitor with high capacity and energy density Voltage flexibility:. V (single cell) to.8 V /. V /.6

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 440 V AC, Class Y2, 300 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 440 V AC, Class Y2, 300 V AC AC Line Rated Ceramic Disc Capacitors Class X1, 440 V AC, Class Y2, 300 V AC EATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC

More information

Small Signal Fast Switching Diode

Small Signal Fast Switching Diode Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial

More information

High Surge Axial Cemented Wirewound Resistors

High Surge Axial Cemented Wirewound Resistors High Surge Axial Cemented Wirewound Resistors FEATURES High voltage surge (up to 12 kv) withstanding capability Non flammable silicon cement coating High grade ceramic core Material categorization: for

More information

Schottky Rectifier, 3.0 A

Schottky Rectifier, 3.0 A VS-30BQ060-M3 Schottky Rectifier, 3.0 A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3.0 A V R 60 V V F at I F 0.52 V I RM 20 ma at 125 C T J max. 150 C Diode variation Single die E AS 5.0 mj

More information

Knob Potentiometer with Switch

Knob Potentiometer with Switch Knob Potentiometer with Switch The is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting

More information

Knob Potentiometer FEATURES. P16NP P16NM Panel Cutout. Thickness nut 2 mm washer 1.5 mm. Panel sealing ring 12 wrench Thread M10 x 0.75 10.2 9.

Knob Potentiometer FEATURES. P16NP P16NM Panel Cutout. Thickness nut 2 mm washer 1.5 mm. Panel sealing ring 12 wrench Thread M10 x 0.75 10.2 9. Knob Potentiometer P6, PA6 FEATURES Test according to CECC 4000 or IEC 60393- P6 - Version for professional and industrial applications (cermet) W at 40 C PA6 - Version for professional audio applications

More information

High Voltage Surge Metal Glaze Leaded Resistor

High Voltage Surge Metal Glaze Leaded Resistor High Voltage Surge Metal Glaze A metal glazed film is deposited on a high grade ceramic body. After that caps are applied to the rods and tinned electrolytic copper wires are welded to these end caps.

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy

More information

Thick Film Resistor Networks, Dual-In-Line, Molded DIP

Thick Film Resistor Networks, Dual-In-Line, Molded DIP Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick

More information

Schottky Rectifier, 1.0 A

Schottky Rectifier, 1.0 A Schottky Rectifier, 1.0 A VS-BQ040-M3 Cathode Anode PRODUCT SUMMARY Package SMB I F(AV) 1.0 A V R 40 V V F at I F 0.38 V I RM 9 ma at 125 C T J max. 150 C Diode variation Single die E AS 3.0 mj FEATURES

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive

More information

High Performance Schottky Rectifier, 3.0 A

High Performance Schottky Rectifier, 3.0 A High Performance Schottky Rectifier, 3. A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3. A V R 4 V V F at I F.46 V I RM 3 ma at 25 C T J max. 5 C Diode variation Single die E AS 6. mj FEATURES

More information

Interference Suppression film capacitors (85 )

Interference Suppression film capacitors (85 ) MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5 mm QUICK REFERENCE DATA Capacitance range (E6 series) * Capacitance tolerance Rated (AC) voltage 50 to 60 Hz Climatic category Rated temperature Maximum

More information

High Pulse, Fusible, Flameproof, Metal Film Resistor

High Pulse, Fusible, Flameproof, Metal Film Resistor High Pulse, Fusible, Flameproof, Metal Film Resistor FEATURES Designed to meet UL1412 safety requirements Defined fusing characteristics Superior surge handling capability > 600 V (1.2 / 50 μs pulse) Meets

More information

QUICK REFERENCE DATA. Pilkor components FEATURES APPLICATIONS

QUICK REFERENCE DATA. Pilkor components FEATURES APPLICATIONS MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5 mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01μF to 3.3μF Capacitance tolerance ±10 %, ±20 % Rated (AC) voltage 50 to 60 Hz 275 V ~

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded

More information

Silicon PIN Photodiode

Silicon PIN Photodiode Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.

More information

Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS

Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box

More information

Silicon NPN Phototransistor

Silicon NPN Phototransistor Silicon NPN Phototransistor DESCRIPTION 94 8391 BPW96 is a silicon NPN phototransistor with high radiant sensitivity in clear, T-1¾ plastic package. It is sensitive to visible and near infrared radiation.

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications

Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination

More information

NTC Thermistors, Mini Epoxy PVC Insulated Leads

NTC Thermistors, Mini Epoxy PVC Insulated Leads NTC Thermistors, Mini Epoxy PVC Insulated Leads FEATURES High adhesive strength between the PVC wire and the encapsulating lacquer Accurate down to ± 0.3 C Small body of max. 3 mm for easy installation

More information

High Performance Schottky Rectifier, 1.0 A

High Performance Schottky Rectifier, 1.0 A High Performance Schottky Rectifier, 1. A VS-BQ3-M3 Cathode Anode SMB PRODUCT SUMMARY Package SMB I F(AV) 1. A V R 3 V V F at I F.42 V I RM max. 15 ma at 125 C T J max. 15 C Diode variation Single die

More information

Zener Diodes FEATURES APPLICATIONS. MINIMUM ORDER QUANTITY BZX85-series BZX85-series-TR 5000 (52 mm tape on 13" reel) /box

Zener Diodes FEATURES APPLICATIONS. MINIMUM ORDER QUANTITY BZX85-series BZX85-series-TR 5000 (52 mm tape on 13 reel) /box BZX8-Series Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom.. to V Test current I ZT. to 8 ma V Z specification Pulse current Int. construction Single FEATURES Silicon planar power

More information

UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier

UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007  Ultrafast Plastic Rectifier UF400, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier FEATURES Glass passivated chip junction Ultrafast reverse recovery time Low forward voltage drop Low switching losses,

More information

High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 1000 h) Thick Film Technology

High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 1000 h) Thick Film Technology High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 0 h) Thick Film Technology thick film resistor chips are specially designed to meet very stringent specifications in terms of reliability, stability

More information

Small Signal Zener Diodes

Small Signal Zener Diodes Small Signal Zener Diodes FEATURES Zener voltage specified at 5 μa Maximum delta V Z given from μa to μa Very high stability Low noise AEC-Q qualified Material categorization: For definitions of compliance

More information

Thick Film Resistor Networks, Military, MIL-PRF Qualified, Type RZ040 to RZ090, Single-In-Line, Molded SIP

Thick Film Resistor Networks, Military, MIL-PRF Qualified, Type RZ040 to RZ090, Single-In-Line, Molded SIP Thick Film Resistor Networks, Military, -PRF-83401 Qualified, Type RZ040 to RZ090, Single-In-Line, Molded SIP FEATURES Isolated, bussed and dual terminator schematics available -PRF-83401 qualified 0.195"

More information

Wet Tantalum Capacitors, Extended Capacitance, Tantalum Case with Glass-to-Tantalum Hermetic Seal for -55 C to +125 C, DLA Approved

Wet Tantalum Capacitors, Extended Capacitance, Tantalum Case with Glass-to-Tantalum Hermetic Seal for -55 C to +125 C, DLA Approved Wet Tantalum Capacitors, xtended Capacitance, Tantalum Case with Glass-to-Tantalum Hermetic Seal for -55 C to +125 C, DLA Approved Refer to: Typical Performance Characteristics Operating Temperature: -55

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to

More information

Optocoupler, Phototransistor Output, AC Input

Optocoupler, Phototransistor Output, AC Input Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have

More information

film capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm

film capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * Capacitance tolerance Rated (AC) voltage 50 to 60 Hz Climatic

More information

High Intensity Red Low Current 7-Segment Display

High Intensity Red Low Current 7-Segment Display High Intensity Red Low Current 7-Segment Display DESCRIPTION 19237 This series defines a new standard for low current displays. It is a single digit 7-segment LED display utilizing AllnGaP technology in

More information

Aluminum Capacitors Miniature, Axial Lead, High Reliability

Aluminum Capacitors Miniature, Axial Lead, High Reliability Aluminum Capacitors Miniature, Axial Lead, High Reliability FEATURES Life test 2000 h at +125 C Wide temperature range Available Foil tantalum replacement Unique Teflon end seal for long life High vibration

More information

Silicon NPN Phototransistor

Silicon NPN Phototransistor Silicon NPN Phototransistor DESCRIPTION 7 is a silicon NPN phototransistor with high radiant sensitivity in black, T-1¾ plastic package with base terminal and daylight blocking filter. Filter bandwidth

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive

More information

4-Line BUS-Port ESD Protection Array - Flow Through Design

4-Line BUS-Port ESD Protection Array - Flow Through Design VBUS5FD-SD1 -Line BUS-Port ESD Protection Array - Flow Through Design 22736 5 MARKING Pin 1 5F = type code = date code Month YY = date code Year 1 YY 5F YY 22738 Type FEATURES Compact Chip Level Page CLP17-5L

More information

Small Signal Zener Diodes

Small Signal Zener Diodes Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V Test current I ZT.7 to 2 ma V Z specification Thermal equilibrium Int. construction Single FEATURES Silicon

More information

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional

More information

Ultrafast Soft Recovery Diode, 150 A FRED Pt

Ultrafast Soft Recovery Diode, 150 A FRED Pt Ultrafast Soft Recovery Diode, 50 A FRED Pt PowerTab Cathode Anode FEATURES Ultrafast recovery time 75 C max. operating junction temperature Screw mounting only AEC-Q0 qualified PowerTab package Material

More information

Silicon PIN Photodiode

Silicon PIN Photodiode BPVNF Silicon PIN Photodiode DESCRIPTION 640- BPVNF is a PIN photodiode with high speed and high radiant sensitivity in black, T-¾ plastic package with daylight blocking filter. Filter bandwidth is matched

More information

Silicon PIN Photodiode

Silicon PIN Photodiode Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near

More information

High Performance Schottky Rectifier, 1 A

High Performance Schottky Rectifier, 1 A High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die

More information

General Purpose Plastic Rectifier

General Purpose Plastic Rectifier General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 275 C max. s, per JESD 22-B6 Compliant to

More information

High Intensity Red Low Current 7-Segment Display

High Intensity Red Low Current 7-Segment Display TDSR5, TDSR6 High Intensity Red Low Current 7-Segment Display 9236 DESCRIPTION This series defines a new standard for low current displays. It is a single digit 7-segment LED display utilizing AllnGaP

More information

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single

More information

Metal Film Resistors, Non-Magnetic, Industrial, Precision

Metal Film Resistors, Non-Magnetic, Industrial, Precision Metal Film Resistors, Non-Magnetic, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics

More information

Infrared Emitting Diode, 950 nm, GaAs

Infrared Emitting Diode, 950 nm, GaAs TSUS54, TSUS541, TSUS542 Infrared Emitting Diode, 95 nm, GaAs DESCRIPTION 94 839 TSUS54 is an infrared, 95 nm emitting diode in GaAs technology molded in a blue-gray tinted plastic package. FEATURES Package

More information

High Intensity Red Low Current 7-Segment Display

High Intensity Red Low Current 7-Segment Display High Intensity Red Low Current 7-Segment Display DESCRIPTION 19235 This series defines a new standard for low current displays. It is a single digit 7-segment LED display utilizing AllnGaP technology in

More information

Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package

Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T

More information

High Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW

High Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW High Power Infrared Emitting Diode, 94 nm, GaAlAs, MQW DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed molded

More information

High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW

High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,

More information

High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors

High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.

More information

Ambient Light Sensor

Ambient Light Sensor Ambient Light Sensor DESCRIPTION 2118 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a T-1¾ package. It is sensitive to visible light much like the human eye and has peak sensitivity

More information

Metal Film Resistors, Industrial, Precision

Metal Film Resistors, Industrial, Precision Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally

More information

Resin-Coated, Radial-Lead Solid Tantalum Capacitors

Resin-Coated, Radial-Lead Solid Tantalum Capacitors Resin-Coated, Radial-Lead Solid Tantalum Capacitors ELECTRICAL CHARACTERISTICS Operating Temperature:- 55 C to + 85 C: Type 489D - 55 C to + 125 C (above 85 C, voltage derating is required): Type 499D

More information

Phototriac, Zero Crossing, 1.5 kv/μs dv/dt, 600 V

Phototriac, Zero Crossing, 1.5 kv/μs dv/dt, 600 V Phototriac, Zero Crossing,.5 kv/μs dv/dt, 600 V SMD FEATURES 500 V/μs dv/dt minimum 600 V blocking voltage A 6 MT2 00 ma on-state current DIP i79030_4 C 2 NC 3 ZCC* 4 MT *Zero crossing circuit 5 V D E

More information

Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP

Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE

More information

SMD PTC - Nickel Thin Film Linear Thermistors

SMD PTC - Nickel Thin Film Linear Thermistors SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage

More information

Insulated Precision Wirewound Resistors Axial Leads

Insulated Precision Wirewound Resistors Axial Leads Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value

More information

Metal Film Resistors, Industrial, Flameproof

Metal Film Resistors, Industrial, Flameproof End of Life - August 13 Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS FEATURES Small physical size Low cost resistors have the ability to withstand overloads up to times

More information