For further information about the position, please contact Development Director Allan Skouboe on

Transcription

1 Auto req ID 494BR Title R&D Mechanics Engineer Job Area Research & Development Country / Countries Denmark Location Vejle Would you like to unfold your engineering talent and deliver innovative state-of-the-art solutions? And are you motivated by working closely with a team of dedicated technical colleagues? Joining Danfoss IXA A/S, you become an active participant in developing our future products and solutions. In Danfoss IXA A/S we are developing exhaust gas sensors for the maritime industry and we are striving to deliver high value propositions to our customers while continuously launching innovative products. You will be working in our office in Vejle and must expect 20 travelling days a year. Customer focused development of ground breaking products Your overall mission will be to ensure development of mechanical parts for exhaust gas sensors, which meet customer expectations with respect to cost, performance and low maintenance rate. In this respect, you will be one of our product development key players, defining optimum relationship between price, performance, reliability and quality. Through knowledge transfer in the daily interaction with colleagues both within and outside your own professional field, you will participate in innovation processes that allow our products to perform in harsh environments, and we rely on you to ensure timely delivery according to product development plans. Other key tasks will be: Analysis of product and system requirements Selection of optimum materials and design Analysis and documentation of design Model design in 3D CAD, preferably AutoDesk Inventor Professional Preparation of production documentation Definition of and follow-up on sub-suppliers Test in the workshop/laboratory ad well as in the field Exhaustive mechanical product development experience and innovative mind-set You hold a BSc or MSc in mechanical engineering, exhaustive mechanical product development experience and preferably experience from a supplier to the maritime industry or from the maritime industry and/or experience with gas sensor products. Furthermore, you are a skilled user of 3D CAD, have experience with gas flow dynamics (CFD) and experience with finite element analysis (FEM). You thrive in a small and informal organisation with high ambitions, and you have a positive attitude, an innovative mind-set and you possess an entrepreneurial spirit. You are fluent in spoken and written English and last but not least, you are prepared to assist colleagues when required even though the task is outside your professional field. We are a small company, which very much rely on the flexibility and entrepreneurship of all employees. For further information about the position, please contact Development Director Allan Skouboe on

2 Auto req ID 61BR Title Development Engineer Mechanical Design of New Sensors Job Area Research & Development Country / Countries Denmark Location Nordborg Do you have the energy and talent to deliver innovative mechanical designs and be a major contributor to our new product platform? Then you could be our next Development Engineer at Danfoss Industrial Automation. Our business is characterised by a high growth rate driven by innovative solutions. As such you will join the Sensors R&D department in a dynamic, fastgrowing organisation. Your responsibility covers development of pressure and temperature sensors for Danfoss Industrial Automation and you play an active role in contributing to increase our overall innovation KPIs. Drive and deliver innovative mechanical design Your primary focus is to drive and deliver innovative mechanical designs contributing to our new product platform for industrial sensors in harsh environments. Delivering solid results according to plan, in due time and in a high quality, is another of your success parameters. Aside from working closely with the other members of your team, you will benefit from a large surface of contacts internally within R&D as well as externally with suppliers and customers. Your key tasks include: Design for manufacturing using Six Sigma and TS16949 tools and processes Specification and validation of design tasks for Indian outsourcing colleagues Development of required documentation, e.g. product specification, FMEAs, test plans and validation documentation Innovative mind-set and a will to win in cooperation with others You hold minimum a B.Sc. in Mechanical Engineering and have the tools to drive innovation from idea to launch. Strong knowledge of and some years practical experience with industrial product development is a must and due to your strong drive you know exactly how to focus your efforts. You work persistently to achieve your goals, and you possess the cooperation skills to develop solid relations also with external partners. You are customer-oriented and have a global mind-set, and it motivates you to make a difference through innovation. Finally, you are characterised by drive and positive energy that rub off on your surroundings. For further information, please contact Director R&D, Jørgen Holm on

3 Auto req ID 58BR Title HW Development Engineer Job Area Research & Development Country / Countries Denmark Location Nordborg Are you an electronics engineer, and are you motivated by working in a highly professional environment? And does groundbreaking product development in close cooperation with other professionals appeal to you? Then you may be the HW Development Engineer we are looking for in Danfoss Residential Heating in Nordborg. We offer you the opportunity to put all your competencies into play and a chance of professional development in cooperation with the department s engineers. We focus on an entirely new line of products, and the first products will be the first step towards a complete product programme. Test, troubleshooting, verification and design In close cooperation with the R&D department s other HW Development Engineers you will design and develop analogue and digital circuits for the new product line. In addition to focusing on circuit design, you will have a unique opportunity to put your competences in play in all other phases of product development, and in time with your professional development you will also get the chance to take on new and interesting areas of responsibility. Your core functions will be: Circuit and layout design Test/verification of components and complete product design to meet product performance requirements and EMC Problem solving and troubleshooting Documentation for internal as well as external use Assistance in relation to product approval/certification Talented and passionate electronics engineer with solid cooperation skills You hold either a bachelor s or a master s degree in electronics engineering and ideally you have some years experience working with product design in an R&D department. We are, however, looking for the right candidate for the position, so if you have recently graduated but have the talent and a holistic approach to the product development phase, please send us your application. What is most important is that you are passionate about design of communication units, power supplies and I/O circuits, would like to develop your competencies further and possess solid cooperation skills both towards engineers and other technical professionals. For further information about the position please contact R&D Director Søren Nielsen on

4 Advanced Mechanical Engineer, Structural Dynamics Rekvisitions-id Publiceret 10/02/ Danmark - Nordborg - Industry Sector - Research & Development - Mellemstor erfaring (>3 år) - Permanent - Kun fuldtid Job ID: Location: Nordborg Organization: Siemens Flow Instruments Mode of employment: Full time For our R&D team we are looking for an Advanced Engineer, Structural Dynamics. We develop and manufacture high end electronic flow meters based on the Coriolis principle. Coriolis flow meters measure directly true mass and density. The range of applications is increasing rapidly in almost all industry areas where flow is a key process parameter. To support this growth we need to strengthen our R&D team with an expert in structural dynamics mainly for Coriolis technologies. What are my responsibilities? You will be a key player in the innovation and technological development of flow meters by conceptual design and by experimental verification of flow meter performance Be the link between science & theoretical structural dynamic knowledge and practical implementation in the sensor design Communicate and present your knowledge internally as well as externally Participate in international seminars and workshops to extend your knowledge and represent Siemens Be the link to Universities and other scientific institutions in areas relevant for advancing flow meter technologies What do I need to qualify for this job? Master of Science in Mechanical Engineering preferably extended with a Ph.D. in relevant areas like final state analysis, modal analysis, mathematical modelling etc. Profound knowledge in solid mechanics, structural dynamics and material science Solid theoretical basis and applied experience with FEMcalculations (ANSYS) and Modal analysis on complex mechanical systems Familiar with mathematical modelling, applied science and experimental verification techniques Preferably knowledge in fluid dynamics, acoustics, electromagnetism and fluid structure interactions Fluent in English both orally and written You have strong analytical skills You are a proactive selfdriven teamplayer In case you have acquired your skills in alternative ways your application is just as well appreciated. What else do I need to know?

5 Siemens A/S, Flow Instruments is the centre of competence for flow measurement within the Siemens group and supports Siemens role as the leading supplier of automation solutions for industry. We develop and manufacture high-tech flow meters, which are used world-wide in process control, process optimization and billing applications. Siemens A/S Flow Instruments is headquartered in Nordborg, Denmark. Apply online in Danish or English for the job on Please note that we will reply by . We are looking forward to receiving your online application. Please ensure you complete all areas of the application form to the best of you ability as we will use the data to review your suitability for the role. For further information, please contact Head of System Architecture, Technology and Innovation Joergen Krusborg, by phone Deadline for Applications: as soon as possible.

6 Auto req ID 73BR Title Software Testengineer Job Area Production & Quality Country / Countries Denmark Location Nordborg Would you like to put your engineering skills to the test ensuring and improving excellent software quality in product releases? Then you could be our new Software Test Engineer within Danfoss Refrigeration and Air Conditioning Controls. We are a leading supplier of compressors and automated solutions for the refrigeration and air conditioning industry. You will become part of the Quality Assurance & Test Centre and join a team of dedicated software developers and testers finding great technical challenges in a global, agile SCRUM development environment. Develop, improve and maintain test suites Your primary focus will be to develop test cases/scripts in NI LabView/TestStand. You will be working closely together with developers in order to ensure the right quality and improve procedures and processes. You will work actively ensuring excellent software quality working with state of the art testing tools. As a natural extension of this, you will need to familiarise yourself with all corners of the software components and keep this information up to date so that you are able to continuously identify any potential issue. Your success in this job will be measured by your ability to deliver quality and speed in execution and ensuring the right time to market. This is a unique opportunity to have a major impact on how our finished products are developed. Strong technical insight and focus on quality and results You have a degree in engineering, computer science or a similar field combined with experience with NI LabView working in a global environment. If you hold an ISTQB Foundation Certificate it will be an advantage. It is vital that you have hands-on experience with qualification activities and possess a solid understanding of software test definitions and approaches. Your professional experience from previous positions has given you advanced understanding of automated software testing and basic hardware knowledge. You are passionate about achieving results, and you have the perseverance necessary to see tasks through to completion. You have the ability to create good relationships which help ensure success in your tasks and the implementation of improvement initiatives. As part of an international organisation, you are able to communicate in English. For further information about the position, please contact Team Leader Martin Iversen on tel