Medium Pressure Filters. 15/40/80CN Series. MAX 600 I/min - 70 bar FEATURING. Medium pressure filters
|
|
- Arnold Warner
- 7 years ago
- Views:
Transcription
1 /4/8CN eries MX 6 I/min 7 bar FETURING 8 Medium pressure filters
2 /4/8CN eries Features & Benefits Features 6 bar fatigue rating (eight times that of a spinon) Diametral (side) seal between head and bowl Dust seal 4CN2 meets automotive HF3 standard CN meets automotive HF2 standard Cast aluminium head Reinforced Microglass III replacement elements Complete performance data disclosure, electrical or electronic indicators available Coreless Ecoglass III replacement elements dvantages bility to provide reliable service under tough cyclic operating conditions Can be utilised in applications where high pressure filters may have been only option Proven reliability in cyclic applications Reduced importance of bowl torque Prevents contamination from building up on bowl/head threads utomotive industry acceptance Low profile, lightweight and durable Multilayered design produced high capacity and efficiency Wire support reduces pleat bunching, keeps performance consistent ll pertinent information is provided in an easytocompare format Check element condition at a glance Right style for the application No metal content in element Reduced overall weight of % Easy compaction of used elements Conversion kits available: new bowl with permanent core Benefits Reduced downtime due to premature filter failures Reduced costs, better fit for the application No downtime, no leaks Performs with real world service Easier service, eliminates thread galling atisfies specifications without need for further testing and/or approval Less weight, smaller envelop and cleaner appearance Great performance value Reliable performance throughout element life Reduces downtime, maximises element life No hidden deficiencies Easy selection of proper filtration Optimise element life, prevent bypassing Matches your system electrical connections Environmentally friendly disposal by incineration Lower element replacement costs Lower disposal cost Retrofit coreless design to housings already installed Typical pplications Compressor lube oil Offline filter loops Machine tools (utomotive standard) Hydrostatic drive charge pumps Mobile equipment Pilot lines for servo controls Oil patch drilling equipment Injection moulding The Parker Filtration /4/8CN eries Medium Pressure Filters. This partial list of applications for Parker CN eries Filters has a common factor, the need for an economical, medium pressure range filter with excellent fatigue pressure ratings. Prior to the availability of the CN filter, applications such as those listed were restricted by limitations of a spinon can, or forced into the highercost range of high pressure filters. The CN eries fills this gap and is now available with environmentally friendly Ecoglass III elements. 82 Parker Hannifin Filter Division Europe FDHB2UK. ection
3 pecification Pressure ratings: Maximum allowable operating pressure: Rated fatigue pressure: 7 bar 6 bar Connections: everal threaded port options available, flange faced ports available on 8CN. Connection style Model CN 4CN 8CN BPF(G), 3 /4 /4, /2 /2, 2 E 2, 6 6, 24 24, 32 IO 649 M27 M33 M42, M48 Metric 3M 2 Filter housing: Head material aluminium. Bowl material hard anodized aluminium. eal material: or fluoroelastomer. Operating temperature range: 2 C to + C. Bypass valve & indicator settings: Table following gives bypass valve and corresponding indicator setting. Bypass Indicator.7 bar.2 bar 2. bar Filtration element: Degree of filtration: Determined by Multipasstest according to IO 6889, see Box 3 in the product configurator. Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved (IO 3724). Microglass III (available by request) upported with epoxy coated metal wire mesh, end cap material reinforced composite and metal inner core. Collapse rating 2 bar (IO 294). Ecoglass III upported with plastic net, end cap material reinforced composite. No metal parts. Collapse rating bar (IO 294). Filter element can only be used together with bowl including Ecoadaptor. Note: Ecoglass III contributes to IO 4 quality. Indicator options: visual M3. electrical T. electronic F(PNP). electronic F2(NPN). For indicator details see catalogue section 6. Weights (kg): Model CN..6 4CN CN Fluid compatibility: uitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration. CN H I N 4CN H J N 8CN H J N F G L K F G L K G L K F J I I M D M D M D C C C B P B P B P Element removal clearance 6mm (2. ) 2.4 (.) Nominal Hex E E 4 Drain plug Element removal clearance 6mm (2. ) 2.4 (.) Nominal Hex E E 4 Drain plug Element removal clearance 6mm (2. ) 2.4 (.) Nominal Hex E E 4 Drain plug Dimensions in mm (inch) Model B C D E F G H I J K L M* N P CN 4CN 8CN 6.6 (6.7) 7.8 (6.73) 28.9 (.6) 2.7 (9.87) (.33) 4.6 (.8) 46. (.83) 62. (2.44) 77.7 (3.6) 2.4 (.9) 32.6 (.28) 49. (.9) 7. (2.8) 7.2 (4.22) 24.8 (4.9) 8.9 (3.38) 27. (.) 8.7 (6.2) 73.2 (2.88). (4.37) 82.6 (3.2) 82.6 (3.2) (4.8).4 (.96) 38. (.) 62. (2.44).6 (4.) 2 (.9) 3.8 (.2) 4. (.62) 4 (.69) 8.8 (2.32) 79.4 (3.2) 36.6 (.44) 6.2 (2.37) 4.3 (.63) xM6.x7.9 deep 4xM8.2x3 deep 4xM8.2x6 deep 227 Nm 768 Nm 89 Nm Note: add 4mm for T and F indicators 83 Medium pressure filters
4 /4/8CN eries 8CN Flange Face Details (E 2 3M) Flange face mounting holes M2.7 x 22 deep Pressure Drop Curves With.7 bar bypass the recommended initial pressure drop is max. bar. With bypass the recommended initial pressure drop is max. bar. If the medium used has a viscosity different from 3 ct, pressure drop over the filter can be estimated as follows: The total Δp = housing Δph + (element Δpe x working viscosity/3). CN Elements CN Empty Housing QE QE QE QE /4 Nominal Port ize Nominal Port ize 8 CN2 Elements QE 2.. QE QE 2QE Parker Hannifin Filter Division Europe FDHB2UK. ection
5 Pressure Drop Curves 4CN Elements 4CN Empty Housing QE QE. QE Nominal Port ize.. 2QE. /2 Nominal Port ize CN2 Elements QE 2. QE. QE. 2QE CN Elements 8CN Empty Housing QE QE QE. 2QE /2 Nominal Port ize 2 Nominal Port ize CN2 Elements QE QE. QE 2QE Medium pressure filters
6 /4/8CN eries Element ervice. top the system s power unit. B. Relieve any system pressure in the filter line. C. Drain the filter bowl if drain port option is provided. D. Loosen and remove bowl. E. Remove element by pulling downward with a slight twisting motion and discard. F. Check bowl oring and antiextrusion ring for damage and replace if necessary. G. Lubricate element oring with system fluid and place on post in filter head. H. Install bowl by rotating counter clockwise and tighten to specified torque. CN 227 Nm (2ft. lbs) 4CN 768 Nm (42ft. lbs) 8CN 89 Nm (67ft. lbs) I. Confirm there are no leaks after powering the system. 3 2 CN Filters Parts List Index Description Head 2 Indicators M3visual auto reset:.2 bar M3visual auto reset: 2. bar 3 Telectrical:.2 bar c/w DIN 436 connector Telectrical: 2. bar c/w DIN 436 connector Felectronic PNP with 4 LEDs:.2 bar Felectronic PNP with 4 LEDs: 2. bar F2electronic NPN with 4 LEDs:.2 bar F2electronic NPN with 4 LEDs: 2. bar 4 Bypass valve.7 bar assembly assembly Element (see replacement element part numbers) 6 Bowl ingle length with drain ingle length with reusable core and drain ingle length without drain Double length with drain Double length with reusable core and drain Double length without drain 7 Bowl and dust seal 8 Drain plug: E Parker Hannifin Filter Division Europe FDHB2UK. ection
7 Ordering Information tandard products table Part numbers CNQEVTKG64 CNQEVM3KG64 CN2QEVTKG64 CN2QEVM3KG64 CN2QEVTKG64 CN2QEVM3KG64 CN22QEVTKG64 CN22QEVM3KG64 4CNQEVTKG244 4CNQEVM3KG244 4CNQEVTKG244 4CNQEVM3KG244 4CN2QEVTKG244 4CN2QEVM3KG244 4CN2QEVTKG244 4CN2QEVM3KG244 4CN2QEVTKG244 4CN2QEVM3KG244 4CN22QEVTKG244 4CN22QEVM3KG244 8CNQEVTKG324 8CNQEVM3KG324 8CN2QEVTKG324 8CN2QEVM3KG324 8CN2QEVTKG324 8CN2QEVM3KG324 8CN22QEVTKG324 8CN22QEVM3KG324 upercedes F3CNRQETW3C2C29 F3CNRQEM2C2C29 F3CNR2QETW3C2C29 F3CNR2QEM2C2C29 F3CN2RQETW3C2C29 F3CN2RQEM2C2C29 F3CN2R2QETW3C2C29 F3CN2R2QEM2C2C29 F34CNRQETW3E2E29 F34CNRQEM2E2E29 F34CNRQETW3E2E29 F34CNRQEM2E2E29 F34CNR2QETW3E2E29 F34CNR2QEM2E2E29 F34CN2RQETW3E2E29 F34CN2RQEM2E2E29 F34CN2RQETW3E2E29 F34CN2RQEM2E2E29 F34CN2R2QETW3E2E29 F34CN2R2QEM2E2E29 F38CNRQETW3F2F29 F38CNRQEM2F2F29 F38CNR2QETW3F2F29 F38CNR2QEM2F2F29 F38CN2RQETW3F2F29 F38CN2RQEM2F2F29 F38CN2R2QETW3F2F29 F38CN2R2QEM2F2F29 Flow (l/min) Model number CN CN CN CN CN CN CN CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 8CN 8CN 8CN 8CN 8CN 8CN 8CN 8CN Element length Media rating (μ) Note: Filter assemblies ordered from the product configurator on next page are on extended lead times. Where possible, please make your selection from the table above eals Indicator Bypass settings Ports G" G" G" G" G" G" G" G" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G /2" G2" G2" G2" G2" G2" G2" G2" G2" Replacement elements 9367Q 9367Q 9367Q 9367Q 93674Q 93674Q 9367Q 9367Q 93677Q 93677Q 93678Q 93678Q 93679Q 93679Q 9367Q 9367Q 9366Q 9366Q 93672Q 93672Q 93662Q 93662Q 9367Q 9367Q 93678Q 93678Q 93679Q 93679Q 87 Medium pressure filters
8 /4/8CN eries Ordering Information (cont.) Product Configurator Box Box 2 4CN 2 Box 3 QE Box 4 V Box M3 Box 6 K Box 7 G24 Box 8 4 Box Model mall size MP filter, Tport Medium size MP filter, Tport Large size MP filter, Tport CN 4CN 8CN Box 2 Length Filter type 2 Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Note: tandard items are in stock, semi standard items are available within four weeks Box 3 Element media Ecoglass III element Degree of filtration Glass fibre 2μ media 2QE μ media QE μ media QE Note: When using Ecoglass III elements a bowl with reusable Ecoadaptor is required. Filter assemblies with Microglass III elements are available by request 2μ media 2QE Box 4 eal material eal type V B Box No indicator port indicator indicator with steel plug Electronic 4 LED, PNP, N.O. Electronic 4 LED, NPN, N.O. Electronic 4 LED, PNP, N.C. Electronic 4 LED, NPN, N.C. Box 8 Options Options tandard drain port on bowl Indicator 4 N M3 T P F F2 F3 F4 Box 6 Bypass valve.7 bar Bypass valve Indicator.2 bar 2. bar G K When filter includes a bypass valve but not an indicator, code denotes bypass setting. Box 7 Ports CN:Thread G 3 /4 Thread G Thread E 2 Thread E 6 Thread M27, IO649 4CN:Thread G /4 Thread G /2 Thread E 6 Thread E 24 Thread M33, IO649 8CN:Thread G /2 Thread G2 Thread E 24 Thread E 32 Thread M42, IO649 Thread M48, IO649 E flange 2" 3M Filter connection G2 G6 2 6 M27 G2 G M33 G24 G M42 M48 R32 Ecoglass III elements ( seals) Model CN CN2 4CN 4CN2 8CN 8CN2 2QE Q 93672Q 93676Q 9367Q 93673Q 93676Q QE Q 93673Q 93677Q 9367Q 93674Q 93677Q QE 9367Q 93674Q 93678Q 9366Q 93662Q 93678Q Conversion bowl assembly (to retrofit existing CN filter housings to use coreless elements) CN coreless element bowl assembly CN2 coreless element bowl assembly CN coreless element bowl assembly CN2 coreless element bowl assembly CN coreless element bowl assembly CN2 coreless element bowl assembly 2QE 9367Q 9367Q 93679Q 93672Q 9367Q 93679Q Model CN 4CN 8CN Replacement element part numbers for conventional assemblies Elements with nitrile seals Elements with seals Model CN CN2 4CN 4CN2 8CN 8CN2 2Q 92893Q 92893Q Q Q 93266Q Q eal kits Q G44Q G469Q G448Q G467Q 93267Q Q * Q Q 92892Q 92683Q Q 93268Q Q 2Q 93367Q 93368Q 9399Q 938Q Q Q Model CN CN2 4CN 4CN2 8CN 8CN2 2Q 9326Q 93266Q 92676Q 92677Q 93269Q 93266Q Q G489Q G49Q G49Q G492Q 93266Q Q Q 93262Q 93268Q Q Q 83266Q Q 2Q 93369Q 9337Q 93Q 939Q 92993Q Q ßx(c)=2.% 6 verage filtration beta ratio ß (IO 6889) / particle size μm [c] ßx(c)= ßx(c)=7 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% 6 Degree of filtration 98.7% % % 6 2 Please note the bolded options reflect standard options with a reduced leadtime of (4) weeks or less. Consult Parker Filtration on all other leadtime options. 99.9% Metal free Ecoglass III 2QE QE QE 2QE Nominal flow (l/min) for filter assembly at viscosity 3ct Housing, port size CN, G CN2, G 4CN, G /2 4CN2, G /2 8CN, G2 8CN2, G2 2QE QE QE QE * s are available under various registered trademarks, including Viton (a registered trademark of DuPont) and Fluorel (a registered trademark of 3M) 88 Parker Hannifin Filter Division Europe FDHB2UK. ection
9 4M/4M Eco eries MX 26 I/min 4 bar FETURING 89 Medium pressure filters
10 4M/4M Eco eries Features & Benefits Features Cast iron head, steel bowl Reinforced Microglass III replacement elements, electrical or electronic indicators available Test points in the filter head Coreless Ecoglass III replacement elements dvantages Can be used in applications where aluminium is not allowed Rugged construction Multilayered design produced high capacity and efficiency Wire support reduces pleat bunching, keeps performance consistent Check element condition at glance Right style for the application Pressure measurement and Δp possible No metal content in element Reduced overall weight of % Easy compaction of used elements Eco adaptors available Benefits pproved for engine rooms and mines Reliable filtration in all conditions Great performance value Reliable performance throughout element life Reduces downtime, maximises element life Optimise element life, prevent bypassing Matches your system electrical connections Quick testing and maintenance Environmentally friendly disposal by incineration Lower element replacement costs Lower disposal costs Retrofit coreless design to housings already installed Typical pplications Industrial power units Mobile construction equipment Forestry equipment The Parker Filtration 4M/4 Eco eries Medium Pressure Filters. The 4M/4 Eco eries of medium pressure filters offer an ideal solution to the problem of protecting system components at lower pressures. These filters are a realistic, high quality alternative to low specification spinon filters. The 4M/4 Eco eries offers high dirt holding capacity, 4 bar capability and rapid element replacement. 9 Parker Hannifin Filter Division Europe FDHB2UK. ection
11 pecification Pressure ratings: Maximum allowable operating pressure 4 bar. Filter housing pressure pulse fatigue tested: 6 pulses 4 bar. Connections: Threads G, G /4 (IO 228/) or flange E /2 3M. Filter housing: Head material cast iron (GI). Bowl material steel. eal material: or. Operating temperature range: 2 to + C Bypass valve: Opening pressure. Filtration element: Degree of filtration: Determined by Multipasstest according to IO 6889, see Box 3 in the product configurator. Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved (IO 3724). Microglass III: upported with epoxy coated metal wire mesh, end cap material reinforced composite and metal inner core. Collapse rating 2 bar (IO 294). Ecoglass III: upported with plastic net, end cap material reinforced composite. No metal parts. Collapse rating bar (IO 294). Filter element can only be used together with reusable FE Ecoadapter. Note: Ecoglass III contributes to IO 4 quality. Indicator options: Indicating differential pressure: 2. ±.2 bar. visual M3. electrical T. electronic F(PNP). electronic F2(NPN). For indicator details see catalogue section 6. Fluid compatibility: uitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration. Installation Details Plug M2x. Type B C Weight (kg) D 6 (4.7) 237 (9.33) 92 (7.6).9 28 (8.2) 33 (3.) 28 (.22) 329 (3.) 4 (7.72) 4 (.94) G, G /4, G /2, Flange E /2 3M D D Length (6.8) (2.6) (9.9) 7. 4 pcs M2 depth 8 only model E 69.8 (2.7) 38 (.) 3.7 (.4) min (2.) B C mm (inches) M depth 2 32 (.2) 7 (2.7) 66 ( ) min (2.) 39 ( ) 8 (2.28) 9 Medium pressure filters
12 4M/4M Eco eries Pressure Drop Curves The recommended level of the initial pressure drop is max. bar. If the medium used has a viscosity different from 3 ct, pressure drop over the filter can be estimated as follows: The total Δp = housing Δph + (element Δpe x working viscosity/3). 4M eries Empty Housing G6 G2 G24 R M Element with Microglass III 4M2 Element with Microglass III Q.2 Q Q 2Q Q Q Q 2Q M3 Element with Microglass III 4M4 Element with Microglass III Q Q 2Q Q Q Q Q 2Q Parker Hannifin Filter Division Europe FDHB2UK. ection
13 4M Element with Ecoglass III 4M2 Element with Ecoglass III QE QE 2QE QE QE QE QE QE M3 Element with Ecoglass III 4M4 Elements with Ecoglass III QE QE QE QE QE QE QE QE Ordering Information tandard products table Product numbers 4MQBPKG6 4M2QBPKG6 4MQEBPKG6 4M2QEBPKG6 4M2QBPKG2 4M22QBPKG2 4M2QEBPKG2 4M22QEBPKG2 4M3QBPKG24 4M32QBPKG24 4M3QEBPKG24 4M32QEBPKG24 upercedes FF4.Q.B3.GT6 FF4.Q2.B3.GT6 FF4.QE.B3.GT6 FF4.QE2.B3.GT6 FF46.Q.B3.GT2 FF46.Q2.B3.GT2 FF46.QE.B3.GT2 FF46.QE2.B3.GT2 FF47.Q.B3.GT24 FF47.Q2.B3.GT24 FF47.QE.B3.GT24 FF47.QE2.B3.GT24 Flow (l/min) Model number 4M 4M 4M 4M 4M 4M 4M 4M 4M 4M 4M 4M Element length Media rating (μ) Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above. Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: lternate displayed part number selection will require you to contact Parker Filtration for availability eals Indicator Bypass settings Ports G" G" G" G" G /4" G /4" G /4" G /4" G /2" G /2" G /2" G /2" Replacement elements Q Q Q Q Q Q Q Q 93897Q 93897Q Q Q upercedes FC7.Q.BK FC7.Q2.BK FC7.QE.BK FC7.QE2.BK FC76.Q.BK FC76.Q2.BK FC76.QE.BK FC76.QE2.BK FC77.Q.BK FC77.Q2.BK FC77.QE.BK FC77.QE2.BK 93 Medium pressure filters
14 4M/4M Eco eries Ordering Information (cont.) Product configurator Box Box 2 4M 2 Box 3 Q Box 4 B Box M3 Box 6 K Box 7 G2 Box 8 Box Box 2 Length Length 4 Model Medium pressure filter, Tport Filter type Box 3 4M Element media Microglass III element Ecoglass III element Degree of filtration Glass fibre 2μ media 2Q 2QE Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Note: tandard items are in stock, semi standard items are available within four weeks μ media Q QE μ media Q QE Note: When using Ecoglass III elements a bowl with reusable Ecoadaptor is required. Filter assemblies with Microglass III elements are available by request 2μ media 2Q 2QE Box 4 eal material eal type B V Box with steel plug indicator indicator Electronic 4 LED, PNP, N.O. Electronic 4 LED, NPN, N.O. Electronic 4 LED, PNP, N.C. Electronic 4 LED, NPN, N.C. Indicator P M3 T F F2 F3 F4 Box 6 Bypass valve No bypass* No bypass* Bypass valve Indicator 2. bar 7. bar No indicator (P) K N X * High collapse element must be used if MOP is higher than element collapse pressure. When filter includes a bypass valve but not an indicator, code denotes bypass setting. + Box 8: code 2 + Box 8: code 2 Box 7 Connections Thread G Thread G /4 Thread G /2 E flange /2" 3M G6 G2 G24 R24 vailability: = standard product x = nonstandard, ask for availability Filter connection x x x x Length 4 x x Box 8 Options tandard No bypass Options 2 Media 2Q Q Q 2Q 2QE QE QE 2QE Replacement elements with nitrile seals 93896Q 93896Q Q Q Q Q Q Q Q 93896Q Q Q 93898Q 93898Q Q Q Q Q 93897Q 93897Q Q 93898Q Q Q Length Q Q Q 93897Q Q Q 93899Q 93899Q Nominal flow (I/min) at viscosity 3 ct connection size Filter length Length 4 Media 2Q/2QE Q/QE Q/QE 2Q/2QE 2Q/2QE Q/QE Q/QE 2Q/2QE 2Q/2QE Q/QE Q/QE 2Q/2QE 2Q/2QE Q/QE Q/QE 2Q/2QE G G G24 & R ßx(c)=2.% 6 Degree of filtration verage filtration beta ratio ß (IO 6889) / particle size μm [c] ßx(c)= ßx(c)=7 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% % % % % Disposable Microglass III 2Q Q Q 2Q Metal free Ecoglass III 2QE QE QE 2QE Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: lternate displayed part number selection will require you to contact Parker Filtration for availability. 94 Parker Hannifin Filter Division Europe FDHB2UK. ection
15 3 Eco eries MX I/min 3 bar FETURING 9 Medium pressure filters
16 3 Eco eries Features & Benefits Features Modular filter system Duplex type systems with selecting valve Bypass assembly in the filter cover Large filtration area ir bleed valve Two indicator locations, visual indicator as standard Coreless Ecoglass III replacement elements dvantages izing and performance can be optimised Element change during operation ediment and other particles at the bottom are away from the flow entering the system High dirt holding capacity Easy air removal after element change Easy to detect when element replacement needed No metal content in element Reduced overall weight of % Easy compaction of used elements Conversion kits available: new bowl with permanent core Benefits Best filter for every lube application Continuous filtration No contamination passing into the system if filter in bypass Long element life Protects bearings and other sensitive components Reliable filtration Environmentally friendly disposal by incineration Lower element replacement costs Lower disposal costs Retrofit coreless design to housings already installed Typical pplications Paper production plants teel mills luminium mills Industrial power packs Lubrication systems Power generation The Parker Filtration 3 Eco eries Medium Pressure Filters. These high flow return filters are ideal for industrial applications on hydraulic or lubrication systems with pressures up to 3 bar and flows up to l/min in single units. Multiple filter systems with pressures up to 6 bar and flows up to 4 l/min. The ability to bank multiple filters together in a duplex format enables continuous filtration during element changes. 96 Parker Hannifin Filter Division Europe FDHB2UK. ection 2
17 pecification Pressure ratings: Maximum allowable operating pressure: ingle filters 3 bar. Filter systems 6 bar. Filter housing pressure pulse fatigue tested: 6 pulses 2 bar. Construction: Ecoelement does not include any metal parts and is supported by Ecoadaptor. Conventional elements can be used without removing the Ecoadaptor. Connections: ingle unit connections: Flanges E 2 3M, E 2 /2 3M or with adaptor threads G /2 or G2. Dual unit connections: Flanges E 3 3M or with adaptor threads G /2 or G2. Parallel unit and filter system assembly connections: DN8/PN6 or DN/PN6. ssembly of two, four six or eight filters to the same system by using Lbore valve assembly (only one side in use). Filter housing: Material aluminium. eal material: or. Operating temperature range: 2 C to + C. Bypass valve: Opening pressure. Filter element: Degree of filtration: Determined by Multipasstest according to IO 6889, see Box 3 in the product configurator. Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved (IO 3724). Ecoglass III: upported with plastic net, end cap material reinforced composite. No metal parts. Collapse rating bar (IO 294). Filter element can only be used together with reusable FE Ecoadapter. Note: Ecoglass III contributes to IO 4 quality. lso available with Microglass III elements. Contact Parker Filtration for details. indicator: Includes M3, full part number FMUM3KVMU2H as standard. Optional Indicators (mounted to lower indicator port): electrical T. electronic F(PNP). electronic F2(NPN). For indicator details see catalogue section 6. Fluid compatibility: uitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration. Installation Details ingle ssemblies 3M Body flange daptor flange Connection options E 2 3M E 2 /2 3M G /2 G2 E 3 3M (9 elbow) M2 8pcs G /2x2pcs G /8 Venting valve M2 4pcs Direction Torque Nm Ø96 Indicator FPC V Weights (kg) ingle Dual D2 Parallel P2 ystem 2 ystem 9 ystem 6 ystem =6 =2 Dimensions in mm G /2 42 Indicator port 63 daptor flange 27 In M2 4pcs Torque Nm daptor flange 28 Torque Nm OUT Option. can be rotated in 9 steps. 97 Medium pressure filters
18 3 Eco eries Dual ystem 3D G /2 x 2pcs G /8 Venting valve 97. Out In Out 9 27 In E 3 flange E 3 flange 9 Thread flange 3 Thread flange 3 Parallel ystem 3N Ø upported from base Connection options Body flange daptor flange thread E 3 3M G /2 G2 G /2x2pcs G /8 Venting valve Type Dimensions in mm Out 63 In In Out 9 29 Port izes DN8/PN6 or DN/PN Ø upported from base 98 Parker Hannifin Filter Division Europe FDHB2UK. ection 2
19 3 ystem + units 3 ystem 2+2 units Indicator FPC V Indicator FPC V Drain valve G /2x2pcs 4 4 Drain valve G /2x2pcs ystem 3+3 units 3 ystem 4+4 units Indicator FPC V Indicator FPC V Drain valve G /2x2pcs Medium pressure filters
20 3 Eco eries Valve ssembly Connection TModel G /2x2pcs G /8 Venting valve Type Dimensions in mm Out low fill valve Out In Indicator port 9 Ø4 393/ /3 In Valve supported from base Port sizes DN8/PN6 or DN/PN6 LModel CModel G /2x2pcs G /8 Venting valve G /2x2pcs G /8 Venting valve Handle turns counter clockwise In Out 366/376 In 9 9 Ø4 Out 24 Indicator port 4 78 Ø4 393/ /3 4 49/ 293/33 Valve supported from base Valve supported from base Parker Hannifin Filter Division Europe FDHB2UK. ection 2
21 Pressure Drop Curves The recommended level of the initial pressure drop is max.8 bar. If the medium used has a viscosity different from 3 ct, pressure drop over the filter can be estimated as follows: The total Δp = housing Δph + (element Δpe x working viscosity/3). 3M Eco ingle Empty Housing 3 Eco ystem Empty Housing G G32 R Elements 2QE Elements QE Elements QE 3 Elements 2QE Δp (psid) Ordering Information tandard products table Part numbers 3M2QEBM3KR4 3M22QEBM3KR4 3M3QEBM3KR4 3M32QEBM3KR4 upercedes FF32.QE.B3.L4 FF32.QE2.B3.L4 FF33.QE.B3.L4 FF33.QE2.B3.L4 Flow (l/min) Model number 3M 3M 3M 3M Element length Media rating (μ) Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: lternate displayed part number selection will require you to contact Parker Filtration for availability. 2 2 eals Indicator Bypass settings Ports E flange 2 /2" 3M E flange 2 /2" 3M E flange 2 /2" 3M E flange 2 /2" 3M Replacement elements Q Q Q Q upercedes FC32.QE.BK FC32.QE2.BK FC33.QE.BK FC33.QE2.BK Medium pressure filters
22 3 Eco eries Ordering Information (cont.) Product configurator Configurator example, single unit: Box Box 2 Box 3 3M 3 QE Box 4 B Box M3 Box 6 K Box 7 R4 Box 8 Configurator example, 2+2 system: Box 3 Box 2 3 Box 3 QE Box 4 B Box M3 Box 6 K Box 7 D Box 8 4 Box Model ingle unit Dual unit Parallel unit ystem 3M 3D 3N 3 Box 2 Length Filter type 2* 3 * = This option is semi standard on single units (3M) only Box 3 Element media Ecoglass III element Degree of filtration Glass fibre 2μ media 2QE* μ media QE * = This option is semi standard on single units (3M) only Filter assemblies with Microglass III elements are available by request μ media QE 2μ media 2QE Box 4 eal material Box 7 eal type Connections Thread G /2 Thread G2 E flange 2" 3M E flange 2 /2" 3M E flange 3" 3M DN8 flange DN flange B V G24 G32 R32 R4 R48 D8 D vailability: = standard product x = nonstandard, ask for availability = not available Box indicator indicator Electronic 4 LED, PNP, N.O. Electronic 4 LED, NPN, N.O. Filter connection 3M x 3D x x Indicator 3N 3 M3 T F F2 M3 indicator always as standard Other indicator options are additional and the indicator must be mounted to lower indicator port. Box 8 Box 6 Bypass valve Options 3M: standard 3D: 2 units 3 units 3N: + units: Lport 2+2 units: Lport 3: + units: Tport 2+2 units: Tport 3+3 units: Tport 4+4 units: Tport + units: Lport 2+2 units: Lport 3+3 units: Lport 4+4 units: Lport Bypass valve Indicator 2. bar Options K Replacement elements with nitrile seals Media 2QE QE QE 2QE Media 2Q Q Q 2Q 93872Q Q Q Q 93872Q Q Q Q Replacement Microglass III elements with nitrile seals Q Q 93873Q Q Q Q Q 93874Q Filter length Nominal flow (I/min) at viscosity 3 ct ingle unit 3M Media 2QE QE QE 2QE 2QE QE QE 2QE G Connection size G R Highlights Key (Denotes part number availability) Item is standard Item is standard with green options Item is semi standard Item is non standard Note: tandard items are in stock, semi standard items are available within four weeks ßx(c)=2.% 6 Degree of filtration verage filtration beta ratio ß (IO 6889) / particle size μm [c] ßx(c)= ßx(c)=7 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% % % % % Metal free Ecoglass III 2QE* QE QE 2QE Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: lternate displayed part number selection will require you to contact Parker Filtration for availability. 2 Parker Hannifin Filter Division Europe FDHB2UK. ection 2
15/40/80CN Series Medium Pressure Filters Max. 600 I/min - 70 bar
1/4/8CN Series Max. 6 I/min - 7 bar Premium performance for medium pressure applications FEATURING An economical multipurpose filter solution The CN Series utilizes a cast aluminium head and spin-on bowl
More information15/40/80CN Series Medium Pressure Filters
1/4/8CN Series Medium Pressure Filters Max 32 l/min - 7 bar Global Filtration Technology 1/4/8CN Series TYPICAL APPLICATIONS Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard)
More information12CS Series Coreless Spin-on Filter Max. 75 l/min - 35 bar
2CS Series Coreless Spin-on Filter Max. 7 l/min - 3 bar Environmentally friendly alternative for spin-on filtration Lightweight, non-metallic element that can be incinerated The 2CS Series features a Parker,
More information15/40/80CN Series Coreless Medium Pressure Filters
//8CN Series Coreless Medium Pressure Filters //8CN Series Applications Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile Equipment Pilot
More informationHigh Pressure Filters. 70/70 Eco Series. MAX 450 I/min -420 bar FEATURING. High pressure filters
7/7 Eco eries MAX 5 I/min - bar FEATURING 5 High pressure filters 7/7 Eco eries Features &enefits Features Fatigue tested to full pressure rating everal head options and connection sizes everal bowl lengths
More informationEco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
More informationEco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
More informationHFS and HFD Series. High Flow Single and Duplex Filters Max. 11200 l/min. 10 bar. Heavy Duty Reliability. Applications: Contact Information:
High Flow Single and Duplex Filters Max. 11200 l/min. 10 bar Heavy Duty Reliability New High Flow Single and Duplex Filters ensure reliability in industrial, marine, and power generation applications up
More informationBGAH Series. Medium Pressure Filters Max. 500 l/min. 25 bar. In-line solution for a straight pipeline. Applications: Contact Information:
BGAH Series Medium Pressure Filters Max. 500 l/min. 25 bar In-line solution for a straight pipeline Pre-filtration by magnet column and a full-flow bypass with low hysteresis. Contamination-proof in-out
More informationIn-Tank Mounted Return Line Filters. IN-AGB Series. MAX 2400 I/min LEIF LEIF FILTER FEATURING AN INNOVATIVE GREEN. Low pressure filters
MAX I/min AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF Low pressure filters Features & Benefits Features Filter integrated in tank LEIF elements Magnetic pre-filtration In-to-Out filtration igh level
More informationMHT. Pressure Filters HIGH PRESSURE INLINE FILTER
MHT Pressure Filters HIGH PEUE INLINE FILTE Pressure Filters MHT MHT 4 MPa ( bar) Port sizes: / / Flow rates: 0 l/min TEHNIAL DATA Max. working pressure: 4 MPa ( bar) Max. testing pressure: 6 MPa (60 bar)
More informationNORMAN FILTER COMPANY PRODUCT OVERVIEW
NORMAN FILTER COMPANY PRODUCT OVERVIEW LEADING THE WAY IN QUALITY FILTRATION WWW.NORMANFILTERS.COM FILTER ELEMENT INTERCHANGE Tee-Type Filter 4500, 14500, 34500, and 54500 Series Mini Tee-Type Filter 4100
More informationReturn line filters. Return line filters
Return line filters Return line filters Index Technical data - 5 Filters series 6 Filters series --3 8 ccessories Spare parts Uni-ardan Italia S.p.. reserves the right to make technical changes to the
More informationHOW THE CONTAMINATION IS MEASURED CONTAMINATION CLASSES ACCORDING TO ISO 4406:1999
CONTAMINATION CONTROL in hydraulic systems in the hydraulic system is a very wide and complex matter; the following is just a short summary. Our Customer Service is at your disposal for any further information.
More informationOUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
More informationCoreless Spin-On Filters. 12AS/50AS Series
Coreless Spin-On Filters 12AS/5AS Series Coreless Spin-on Filters 12AS/5AS Series The Smart Alternative to Spin-on Cans! Features: Parker engineers have developed an innovative alternative to the age old
More informationSafety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
More informationTanktop Mounted Return Line Filters. BGT Series. MAX 2400 I/min - 10 bar LEIF LEIF FILTER FEATURING AN INNOVATIVE GREEN. Low pressure filters
GT Series X 2 I/min - bar N INNOVTIV GRN FITR FTURING IF IF 2 ow pressure filters GT Series Features & enefits Features bar rated filter ast aluminium head IF elements agnetic pre-filtration In-to-Out
More informationDuplex Filters 40/160 LD 0003-0045 40/160 LDN 0040-0400. Industrial Filters Accumulators. Filters for inline installation for continuous operation
Industrial Filters Accumulators Duplex Filters 40/160 LD 0003-0045 40/160 LDN 0040-0400 Filters for inline installation for continuous operation With integrated pressure equalisation valve Optimised flow
More informationThe SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron.
D e s c r i p t i o n 500 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron. A major feature of these
More informationHydraulic Filtration & Contamination Control Products. Catalogue: FDHB200UK January 2007
Hydraulic Filtration & Contamination Control Products Catalogue: FDHB2UK January 27 Consistent quality Technical innovation Premier customer service Hydraulic, Lubrication & Coolant Filtration High-performance
More informationRMF TANDEM 900 OFF-LINE FILTER SYSTEMS
RMF TANDEM 900 OFF-LINE FILTER SYSTEMS RMF Tandem 900 Off-line filter Systems can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated
More informationSafety for Hydraulics Leak free check valve, pilot operated, series ERV Cartridge type, two stage
Safety for Hydraulics Leak free check valve, pilot operated, series Cartridge type, two stage prevents a load from falling if a burst occurs in feed pipe hardened seat and poppet prevents creep of hydraulically
More informationE4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
More informationDuplex Filters 40 FLDK 0008(C)-0120(C)
Industrial Filters Accumulators Duplex Filters 40 FLDK 0008(C)-0120(C) Filters for inline installation for continuous operating Ball valve change over Optimised flow characteristics by 3D computer aided
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationSCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More informationSeries TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationA10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711
A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationCheck Valves Valve locator
Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()
More informationNew. absolute filter elements independently tested in the following Institutes: MPH-MPI 02050/7.99/USA 2 COVER INSERT
e s c r i p t i o n MPH and MPI series filters are designed for returnline applications and provide various installation applications. The filters are installed semiimmersed or totally immersed into a
More informationLEIF LEIF. BGT Series. Tanktop Mounted Return Line Filters Max. 2400 I/min - 10 bar. Patented LEIF elements safeguard filtration quality
GT Series Tanktop ounted Return ine Filters ax. 24 I/min - bar atented IF elements safeguard filtration quality When high flow performance is needed N INNOVTIV GRN FITR FTURING IF IF The GT Series features
More informationQPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
More informationFluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
More informationPVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
More informationHIGH PERFORMANCE FILTERS AND ELEMENTS
HIGH PERFORMANCE FILTERS AND ELEMENTS FILTRATION Fil*tra*tion (fil-tra-shen) n. The act or process of filtering. What exactly is filtration and why is it an integral part of today s industries? Simply
More informationBackflush filter R8-30W
Backflush filter R8-30W With internal pressure segment cleaning, rated pressure to 40 bar (580 psi) Connection sizes: DN 200 to DN 500, welded design 1. Features Powerful, fully automatic filtration _
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationFILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
More informationMVX-Series Diesel Engine Shut Down Valves (Cable Operated Closure/Integral Reset Lever Types)
MVX-Series Diesel Engine Shut Down Valves (Cable Operated Closure/Integral Reset Lever Types) Selection, pplication and Maintenance Valve Numbers MVX-301 MVX-302 MVX-303 MVX-501 MVX-502 MVX-503 MVX-801
More informationSERIES FRI. Maximum working pressure 20 bar Flow rate to 1200 l/min. s.p.a
SRIS FRI Maximum working pressure bar Flow rate to 1 l/min s.p.a R FRI series filter has been disigned and developed to satisfy the demands pf applications, on return or low preessure line in Hydraulic
More informationDIESEL FUEL CONDITIONING
COD FILTRATION DIESEL FUEL CONDITIONING REMOVE WATER & PARTICLES TO EXTEND FUEL INJECTOR LIFE & INCREASE COMBUSTION ENGINE FUEL EFFICIENCY Remove free water to saturation point with high single pass efficiency
More informationPVS 185, 600, 1200, 1800, 2700 Series Portable Purification Systems
185, 600, 1200, 1800, 2700 Series Portable Purification Systems FEATURING Global Filtration Technology PRINCIPLES OF OPERATION Contaminated oil is drawn into the Parker Portable Purification System by
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationFilter Elements E 7.200.9/05.06
HYDAC Filter Elements safeguard the performance and service life of essential and expensive hydraulic components due to their high standard of quality Filter Elements Technical details: Absolute filtration
More informationRPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
More informationPiston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
More informationCSD WATER REMOVAL FILTERS FOR DIESEL
CSD CSD WATER REMOVAL FILTERS FOR DIESEL Remove water to extend fuel injector life & increase combustion fuel efficiency Remove free water to saturation point with high single pass efficienc (achieve
More informationEurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...
More informationSOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationIF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
More informationBelow Grade Spill Containment Manholes 705-5 Gallon 715-15 Gallon 725-25 Gallon. Installation Instructions
Below Grade Spill Containment Manholes 705-5 Gallon 715-15 Gallon 725-25 Gallon Installation Instructions Warning Application and use of this product should be in compliance with local, state, and federal
More informationVickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
More informationReusable contamination basket prevents loss of retained contaminants into the reservoir during element replacement.
APPLICATION RETURN LINE FILTERS Series RF & RFD Pressures to 36 PSI Flows to 3 GPM HYDAC RF and RFD In-Tank Return Line Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
More informationMPX-Series Diesel Engine Shut Down Valves (Manual Reset / Air Pressure and Manual Closure Options)
MPX-Series Diesel Engine Shut Down Valves (Manual Reset / ir Pressure and Manual Closure Options) Selection, pplication and Maintenance Valve Numbers MPX-300 MPX-301 MPX-302 MPX-303 MPX-310 MPX-500 MPX-501
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
More informationFlow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
More informationSMR Series Submicronic Removal Fluid Purifi cation Systems
SMR Series Submicronic Removal Fluid Purifi cation Systems 193 SMR Series Applications The SMR Series is the smart purification solution for fluid flow in the 2-10 GPM (8-38 LPM) range. The SMR contains
More informationVariable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More informationPVS Series - Models 185, 600, 1200, 1800 and 2700
PVS Series - Models 185, 600, 1200, 1800 and 2700 Reduce the catastrophic results of water contamination Eliminate water from the hydraulic system The PVS Series Portable Purification Systems, available
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationCOUNTERBALANCE VALVES
COUNTERBALANCE VALVES Introduction They are modulating valves which allow free flow into the actuator and then block the reverse flow until they feel a pilot pressure inversely proportional to the load
More informationTrunnion-Design Ball Valves
Trunnion-Design Ball Valves 12" 20" (DN 300 500) Series 7150 12" (DN 300) Series 730S 12" 20" (DN 300 500) Series 7300 14" 24" (DN 350 600) Series 9150 14" 24" (DN 350 600) Series 9300 Installation, Maintenance
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationHow To Make A Fuel Manager Filter/Separator
The Versatile Diesel Fuel Filtration/Water Separator System From America s Foremost Diesel Technology Innovator STANADYNE The Versatile Fuel Filtration System FOR EVERY DIESEL ENGINE, EVERY DIESEL APPLICATION
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationProportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F040-1/E Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 AGMZO are two stage poppet type proportional
More informationOpen center control block in monoblock design MO-40
Open center control block in monoblock design MO-40 RE 64370 Edition: 02.2015 Replaces: 02.1985 Size 40 Series 1X Maximum working pressure on pump side 350 bar on consumer side 420 bar Maximum flow 680
More informationPUMP AND MOTOR DIVISION
INSTALLATION MANUAL SERIES P2 and P3 MOBILE PISTON PUMP 1 Check model code / compare with your paper work Nameplate of the pump Ordering / Sales Acknowledgement 2 Check rotation of the pump Clockwise rotation
More informationDXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
More informationRexroth Hydraulic Pump A10VO Series User Manual
Rexroth Hydraulic Pump A10VO Series User Manual Rexroth Hydraulic pump A10VO Series User Manual Revised 5/1/2009 Page 1 of 12 Functional Purpose This pump is preferred over a fixed displacement (gear)
More informationMINEX -S. Magnetic coupling. You will find continuously updated data in our online catalogue at www.ktr.com
MINEX - 171 Table of contents NEW MINEX - 171 Coupling description 173 Technical description 174 s A 22/4 to B 60/8 with containment shroud made of stainless steel 175 s A 75/10 to F 250/38 with containment
More informationInternal gear pump PGF Series 2X and 3X
Internal gear pump GF eries 2X and 3X RE 23 Edition: 4.24 Replaces: 5.2 Fixed displacement Frame sizes, 2 and 3 izes.7 to 4 Maximum pressure 25 bar Displacement.7 to 4 cm 3 H758 Features ow operating noise
More informationIndicators Series FPC
Indicators Series FP Max 40 bar Global Filtration Technology FP TYPIAL APPLIATIONS Industrial Equipment Mobile Equipment Marine/Offshore Applications ompetitor Housing The FP range of filter condition
More informationP7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc Installation Timing Pin Location CAUTION: Before installing the injection pump, be sure that number 1 cylinder is at the Top Dead Center
More informationOIL-X EVOLUTION Compressed Air Filters ENGINEERING YOUR SUCCESS. TECNI-AR Ltda - Tel: 31 3362-2400 w.tecni-ar.com.br
OIL-X EVOLUTION ENGINEERING YOUR SUCCESS. OIL-X EVOLUTION High Efficiency Compressed Air Filtration OIL-X EVOLUTION is a range of high efficiency compressed air filters consisting of coalescing filter
More informationSteering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
More informationPRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 1 E0.14.0503.02.01 TM GEAR PUMPS AND MOTORS GROUP 1 INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions
More informationMVX-Series Diesel Engine Air Shut Down Valves
MVX-Series Diesel Engine Air Shut Down Valves (Cable operated closure/integral reset lever types) Selection, Application and Maintenance SPECIAL VALVE MVX-304 This is a special version of valve type MVX-303
More informationSERIES FRI. Maximum working pressure 20 bar F l o w r a t e t o 1 2 0 0 l / m i n. s. p. a
New Headquarters : MP FILTRI S.p.. Italy Via 1 Maggio, n. Pessano con ornago (Milano) Italy Tel. +9./97.1 Fax +9./9741497-974188 email: sales@mpfiltri.com http://www.mpfiltri.com GRT RITIN MP FILTRI U.K.
More information4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
More informationEasy Tool Retracting System CMC-SR2159ER36
Easy Tool Retracting System CMC-SR2159ER36 Pepperl+Fuchs, Inc. 1600 Enterprise Parkway Twinsburg, Ohio 44087 Phone: +1 330 486 0002 e-mail: pa-info@us.pepperl-fuchs.com Mounting the Easy Tool Refer to
More informationBall valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
More informationLubricant Transfer, Storage & Dispensing
Lubricant Transfer, Storage & Dispensing WHY USE OIL SAFE TRANSFER CONTAINERS? OIL SAFE - TRANSFER CONTAINERS For more than a decade, OIL SAFE has been the oil transfer manage- The color-coded range of
More information08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
More information6 Crankcase Ventilation
6 Crankcase Ventilation Introduction... 6-3 Crankcase Ventilation Manager (CVM)... 6-5 Introduction... 6-6 CVM280B..................................... 6-7 CVM280T... 6-10 CVM424B....................................
More informationProfile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationHydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference
More informationWater Separator. Main Line Filter. Mist Separator. Micro Mist Separator 150C 250C 350C 450C AMG 550C 2C 4C 8C 11C AFF 22C 37B 75B 150C 250C 350C 450C
Water droplet removal Water Separator Water droplet separation rate: % Model Flow capacity l/min (ANR) Max. flow capacity at 0.7 MPa inlet pressure 300 750 1,500 AMG 2,0 AMG to AMG/ Large dust particle
More information