Digital indicators SUMMARY OF ALL TYPES S233. S_Dial ONE S234

Transcription

1 DIGITAL indicators The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle and a sensor which replaces the gears. The analogic display is transformed into a digital display. The SYLVAC electronic indicator program covers all the range of mechanical indicators with resolutions 0.1 to and measuring range up to 150, and with much better accuracy. Sylvac inductive measuring system (patented) Data output Power supply: Lithium battery 3V, Type CR 2032 Operational temperature: +5 to +40 C /inch conversion 31

2 SUMMARY OF ALL TYPES S_Dial S233 S_Dial ONE S234 RANGE RESOLUTION MECANIC Diameter 8 h6 Dove tail M1.4 contact point M2.5 contact point Rubber boot IP65 (IEC 60529) IP67 (IEC 60529) DIAL Diameter 44 Diameter 60 Rotating Big digits Vertical display FUNCTIONS /inch Preset Dynamic preset Measuring direction Hold Min / Max / Delta Tolerances Absolute Function (ABS) Auto off Analog display Setting by PC Powered by connector

3 SUMMARY OF ALL TYPES S_Dial S229 S213 RANGE RESOLUTION MECANIC Diameter 8 h6 Dove tail M1.4 contact point M2.5 contact point Rubber boot IP65 (IEC 60529) IP67 (IEC 60529) DIAL Diameter 44 Diameter 60 Rotating Big digits Vertical display FUNCTIONS /inch Preset Dynamic preset Measuring direction Hold Min / Max / Delta Tolerances Absolute Function (ABS) Auto off Analog display Setting by PC Powered by connector

4 Digital test indicators description S_Dial S234 Digital and analogic display Water and coolant resistant Data output RS 232 combined with external power Battery life : hours continuous Automatic switch OFF Delivered with Stem Ø 8 and dovetail back Rotating display by 360 Digital display LCD, Height of digits 6 Polyamide case, rotating display by 360 Zero setting by turning the polyamide case Analogic display Measuring insert with tungsten carbide ball Ø 2, movable by 270, interchangeable, M

5 Digital test indicators S_Dial S234 DIMENSIONAL DRAWING TECHNICAL SPECIFICATIONS Measuring range Probe length Max Error fe µm Hysteresis fu µm Resolution Repeatability µm Measuring force Weight Protection rating according to IEC S_Connect : Power Zero setting min / max / delta display Analog scale range ratio Selection of resolution 1) ± 1 digit 2) see cables chapter N ) 3 1) ± 15% 0.07 ± 15% IP65 USB / RS232 / Digimatic / Wireless 2) 35

6 Digital test indicators DISPLAY S_Dial S234 Direct /inch conversion Analog display Min/max/delta mode Analogic resolution display Zero setting BASIC INSTRUMENT Instrument according to technical specifications Lithium battery CR2302 included Manual Stem Ø 8 applications Run-out measurement Checking the alignment of a vice on milling machine. 36

7 37

8 Mini digital indicators description S_Dial S233 Compact, small diameter Water and coolant resistant, protection rating IP65 according to IEC Data output RS 232 combined with external power supply. Interchangeable contact point M2.5 Clamping Stem Ø 8-h6 in hardened and ground stainless steel and dovetail back Battery life: hours continuous Automatic power shut down Standard Analogic Vertical Polyamide case, fixed display Digital display LCD, Height of digits 6 Clamping Ø 8-h6 Stainless steel measuring pin, grinded Interchangeable contact point, stainless steel with TC ball Rubber boot on protected version 38

9 Mini digital indicators DIMENSIONAL DRAWINGS S_Dial S233 Standard Analogic Vertical S = standard P = protected 39

10 Mini digital indicators TECHNICAL SPECIFICATIONS S_Dial S233 Measuring range Display 90 Analogic scale Resolution Execution 3) Max. Error fe µm Repeatability µm Measuring force N Zero setting REL and ABS measurement Resolution selection PRESET = (max. 130 ) Min / max / delta display Selection of measuring direction S_Connect : Power S S S P 10 1) ) ) ) ) USB / RS232 / Digimatic / Wireless 4) Measuring range Résolution Execution 3) S P S P Max. Error fe µm 10 1) 10 1) 5 5 Repeatability µm Resolution selection S_Connect : Power Zero setting REL and ABS measurement PRESET = (max. 130 ) Selection of measuring direction USB / RS232 / Digimatic / Wireless 4) 1) ± 1 digit 2) Values ± 20%, indicator in vertical position, outgoing measuring spindle 3) S = Standard P = Protected 4) see cables chapter 40

11 Mini digital indicators BASIC INSTRUMENT S_Dial S233 Instrument according to technical specifications Lithium battery CR2302 included Manual Calibration certificate for instruments with resolution of MEASURING FORCE FOR RANGE 12.5 Standard Low 1) High 1) S N N P N N --- The values get along to ±20%, indicator in vertical position, spindle in outgoing measurement position. 1) on request applications Checking of an internal Ø with a mechanical head Measure of the vertical displacement of an element Alignement of a machine element 41

12 description S_Dial ONE Strong construction Water and coolant resistant, protection rating IP67 according to IEC 60529, with and without connector Battery life: hours Digital display LCD, height of digits 10,5 Lifting device integrated Clamping Ø 8-h6 Stainless steel measuring pin, grinded Interchangeable contact point, stainless steel with TC ball 42

13 S_Dial ONE dimensional drawings technical specifications Measuring range Resolution Max. Error fe µm Repeatability µm S_Connect : Power Prograable by PC Zero setting Preset Selection of measuring direction 1) ± 1 digit ) ) USB / RS232 / Digimatic / Wireless basic instrument Instrument according to technical specifications Lithium battery CR2302 included Manual Calibration certificate for instruments with resolution of

14 description S_Dial S229 Data output Opto-RS232 or Opto-USB Battery life: hours continuous Measuring range from 12.5 to 150 Simplified functions Strong construction Digital display LCD, Height of digits 8.5 Aluminium case, rotating display over 270 Clamping : Stem Ø 8-h6 in hardened and ground stainless steel Interchangeable contact point M2.5 with ball probe in hard metal Measuring spindle hardened and grounded in stainless steel 44

15 description S_Dial S213 Construction identical to the S229 version Data output Opto-RS232 or Opto-USB Battery life: hours continuous Min / max / delta values Selection and display of tolerances Prograable by PC Dynamic PRESET on type int /Ext (recall of the preset on value min/max memorized) Type Int /Ext Digital display LCD, height of digits 8.5 LED Tolerances display 45

16 S_Dial S229 + S213 DIMENSIONAL DRAWINGS S = standard P = protected TECHNICAL SPECIFICATIONS Zero setting Memory Set HOLD 2 references PRESET Selection of measuring direction Min / max / delta values Selection and display of tolerances. PRESET recall on min, max memorized value Prograable by PC S_Connect : Opto 1) see cables chapter S229 S RS232 / USB / Digimatic / Wireless 1) Int / Ext on min/max

17 S_Dial S229 + S213 TECHNICAL SPECIFICATIONS Measur. range Version Execution 2) Resolution Max. Error fe µm Repetability µm A B C S229 S229 S229 S229 S229 S213 S213 S213 S P S S P S S P ) 10 1) Measur. range Version Execution 2) Resolution Max. Error fe Repetability µm A B C S229 S229 S229 S229 S213 S213 Int / Ext S P S P S P S ) 10 1) Measur. range Version Execution 2) Resolution Max. Error fe µm Repeatability µm A B C 1) ± 1 digit 2) S = Standard P = Protected S229 S229 S229 S229 S229 S229 S S S S S S ) ) )

18 MEASURING FORCE S_Dial S229 + S213 Standard Low 1) High 1) N N N S 12.5 P 12.5 S 25 P 25 S 50 S 100 S The values get along to ± 20%, spindle in outgoing measurement position. 1) on request BASIC INSTRUMENT Instrument according to technical specifications Lithium battery CR2302 included Manual Calibration certificate for instruments with a resolution of applications Measure of a groove with a S213 and measuring ball probe Indicator S229, range 150 on stand Use of S213 with a small measuring bench Sylvac PS15 48

19 LIFTING DEVICES S_Dial S229 + S213 Lower lifting lever, type Upper lifting lever type, Pneumatic lifting device type Lifting lever type Vacuum lifting device type Lifting device with photo-cable type Upper lifting lever type

20 ACCESSORIES S_Dial Contact points M2.5 S233 S234 S229 12,5-25 S S213 12,5-25 S_Dial ONE R M2.5 M Ø7.7 Ø Short probe, TC ball Short standard probe, TC ball Short probe, TC ball Long probe, TC ball Long standard probe, TC ball Long probe, TC ball 50

21 ACCESSORIES S_Dial S233 S234 S229 12,5-25 S S213 12,5-25 S_Dial ONE Clamping stem Clamping stem Spanner for probe Lifting device range Lifting device range Lug back Centre lug back 51

22 ACCESSORIES S_Dial S233 S234 S229 12,5-25 S S213 12,5-25 S_Dial ONE Lifting device Upper lifting device Lifting device with photo-cable Pneumatic lifting device with foot pedal Lifter only for Pneumatic foot pedal for Vacuum lifting device with foot pedal Ø4/2 L=2m Pressure controller for Ø6/4 L=2m Vacuum foot pedal for

23 ACCESSORIES S_Dial S233 S234 S229 12,5-25 S S213 12,5-25 S_Dial ONE Dust protection for indicator, range Dust protection for indicator, range Depth measuring base See also page Protection for front face Snap connector for pneumatic lifter x Snap connector for pneumatic lifter x Centre lug back 53

24 ACCESSORIES S_Dial Ø S233 S234 S229 12,5-25 S S213 12,5-25 S_Dial ONE External power supply Lower lifting device, range ) 1) 1) Upper lifting device for S (Standard) execution, except vertical type 1) used on range 20 max 54

25 ACCESSORIES S_Dial S233 S234 S229 12,5-25 S S213 12,5-25 S_Dial ONE Pneumatic lifting device for standard type Flat back 55

26 Measuring stands description A selection of universal measuring stands for fixing all probes, test indicators and dial gauges Clamping on Ø 8 or dovetail on magnetic stand Threaded column for height positioning accuracy Articulated arm Fine adjustment Magnetic base Granite base Ceramic base 56

27 Measuring stands TECHNICAL SPECIFICATIONS Base magnetic 1) granite grade 00 cast iron, ceramic table granite grade 00 granite grade 00 Base dimensions 70x46x65 100x150x40 85x85x25 240x140x50 300x210x60 Central locking 1 handle Column --- Steel Ø 20 Chr.st. Ø 25 Hard Chr. Ø 35 Hard Chr. Ø 35 Clamping dimension Ø 8 Ø 8 Ø 8 Ø 8 Ø 8 Dist. Column.-meas. point Measuring range Total height Weight 2.2 kg 2.6 kg 4.3 kg 8 kg 16 kg Fine adjustment 1) Gripping coefficient : 600N

28 58