DIP型ロータリ コードスイッチ S-１０００A/２０００A ROTARY CODED SWITCHES INTERNAL STRUCTURE S-1000A / 2000A

Transcription

1 OPAL ELETRONIS ROTARY ODED SWITHES INTERNAL STRUTURE S-A / A series FEATURES Lead-free soldering Protection against dust and whole cleaning after soldering is possible Pin compatible with conventional DIP switches Translucent knob with flange type (S-A/A series) Distinguished visibility with trans lucent flange Settable with fingers or screwdriver Part name Housing ontact Terminal pin Base O ring Insert rotor Translucent knob with flange Material PBT Polybutyleneterephthalate opper alloy, Gold-plated PBT Polybutyleneterephthalate Silicone rubber Rotor : Polyoxymethylene Pattern : opper alloy, Gold-plated Polyarylate S-A/A only Flammability UL-HB UL-HB UL-V- Fs (PBBOs, PBBs) Fs, Halon, arbon tetrachloride and designated bromic flame retardant PBBOs and PBBs are not used in our products. PART NUMBER DESIGNATION No. of positions positions positions S - A W Form of packaging WTray packaging BlankBulk in vinyl bag Shape of rotor Without knob With knob (with extended shaft) Translucent knob with flange (Black housing) ode format Setting position Real code omplementary code Please refer to the LIST OF PART NUMBERS when placing orders.

2 OPAL ELETRONIS S-A/A ROTARY ODED SWITHES LIST OF PART NUMBERS Top setting Side setting Shape Without knob With knob Translucent knob with flange Without knob With knob Translucent knob with flange Form of packging Tray packaging Vinyl pack Tray packaging Vinyl pack Tray packaging Vinyl pack Tray packaging Vinyl pack Tray packaging Vinyl pack Tray packaging Vinyl pack Binary coded decimal Binary coded hexadecimal Real code omplementary code Real code omplementary code S-AW S-AW S-AW S-AW S-A S-A S-A S-A S-AW S-AW S-AW S-AW S-A S-A S-A S-A S-AW S-AW S-AW S-AW S-A S-A S-A S-A S-AW S-AW S-AW S-AW S-A S-A S-A S-A S-AW S-AW S-AW S-AW S-A S-A S-A S-A S-AW S-AW S-AW S-AW S-A S-A S-A S-A Pieces in package pcs./pack pcs./pack pcs./pack pcs./pack pcs./pack pcs./pack Verify the above part numbers when placing orders. Tray version can be supplied only in tray units. TERMINAL ONNETION / P..B. THROUGH HOLE DIMENSIONS Terminal pin layout (Bottom view) Real code omplementary code Operating face of real code Operating face of complementary code (Unit: mm) P..B. dimensions (Bottom view) ±. ±.. hole.±. ±. ±. Operating face. hole.±. S A/A case S A/A case ODE FORMAT ode S-A series ( positions) No. of positions S-A series ( positions) Position A B D E F Real code omplementary code ontact closed

3 OPAL ELETRONIS S-A/A ROTARY ODED SWITHES STANDARD SPEIFIATIONS ircuit type Operating temperature range Storage temperature range Sealing Net weight No. of positions Adjustment torque Stepping angle Terminal strength Solderability BD (Real code, complementary code) BH (Real code, complementary code) ~ Washable by O ring Approx.. g (S-A, S-A, S-A, S-A) Approx.. g (S-A, S-A, S-A, S-A) Approx.. g (S-A, S-A, S-A, S-A) Approx.. g (S-A, S-A, S-A, S-A) Approx.. g (S-A, S-A, S-A, S-A) Approx.. g (S-A, S-A, S-A, S-A) MEHANIAL HARATERISTIS Soldering heat (S-A), (S-A) mn m { gf cm} minimum. (S-A), (S-A) N {. kgf} minimum ±, ~ s ± Flow : ± as the temperature in a pot of molten solder, immersion from head of terminal to backside of board, ~ s, twice. Manual soldering ±, ~ s { } : Reference only ELETRIAL HARATERISTIS ontact rating Non-switching Switching Minimum ontact resistance Insulation resistance Dielectric strength Shock Durability Humidity (Steady state) High temperature exposure Low temperature exposure Thermal shock D V ma D V ma D mv µa mω maximum MΩ (D V) minimum A V, Hz, s ENVIRONMENTAL HARATERISTIS Vibration (Amplitude). mmor (Acceleration) m/s, -- Hz, directions for h each m/s, ms directions for times each steps D V, ma, Relative humidity ~ %, h, h, h (. h) ~ (. h ), cycles

4 ABDEF ABDEF ABDEF OPAL ELETRONIS S-A/A ROTARY ODED SWITHES OUTLINE DIMENSIONS (S-A series) S-A S-A ±.. W. L. D Unless otherwise specified, tolerance: ±. (Unit: mm).±.. ±. ABDEF.±. t =. S-A S-A ±.. W. L. D. ±..±..±. t =.. S-A S-A ±.. W D...±.. ±..±. t =. S-A S-A ±.. W D.. ±..±..±. t =..

5 OPAL ELETRONIS S-A/A ROTARY ODED SWITHES OUTLINE DIMENSIONS (S-A series) S-A S-A ±. ±.. W. L. D.±..±. t =. Unless otherwise specified, tolerance: ±. (Unit: mm). S-A S-A ±..±. ±.. W. L. D..±. t =.. S-A S-A ±. ±.. W D... M =. Straight knurl.±. t =..±.. S-A S-A ±.. W D... ±...±..±. t =... M =. Straight knurl

6 DEF OPAL ELETRONIS S-A/A ROTARY ODED SWITHES OUTLINE DIMENSIONS (S-A/A series) S-A S-A ±.. W D ±..±.. DEF AB.±. t =. Unless otherwise specified, tolerance: ±. (Unit: mm) S-A S-A ±.. ±. AB S-A S-A.±. ±.. W D.±. t =.. W D. ±..±...±. t =. S-A S-A ±.. ±..±.. W D.±. t =..

7 OPAL ELETRONIS S-A/A ROTARY ODED SWITHES OUTLINE DIMENSIONS Snap-in terminal pin with translucent knob with flange (Made to order basis) S-AK and S-AK Unless otherwise specified, tolerance: ±. (Unit: mm) PAKAGING SPEIFIATIONS <Tray packaging specifications> Tray version is packaged in pcs. per tyay. Orders will be accepted for units of pcs., i. e.,,, pcs. etc. Tray version is boxed with trays. <Vinyl pack specifications> The smallest unit of bulk in vinyl bag packaging is pcs. per pack. Orders will be accepted for unit of minimum pcs., i.e.,,, pcs., etc. Boxing of bulk in vinyl bags is performed with pcs. (standard pcs.) per box. LARGE KNOB K (Unit: mm)... The large knob is common to S-A, S-A, SA- and SS- series. Note : The switch with a large knob for manual adjustment is available as a semi standard item.