Software Activation: inform 2.2 is licensed software that must be activated for use of anything other than the viewer.

Transcription

1 inform Software Release Notes Software Version: 2.2 This file provides information about inform software, version 2.2 Please read this information carefully as it supersedes all printed material or online help. Overview: inform software allows image analysis of proprietary PerkinElmer images taken with Mantra, Vectra, TRIO, Nuance, or Maestro, along with standard image formats such as.tif,.jpg and.png images. If you are an existing user, installing version 2.2 will not require the uninstallation of previous versions. We suggest that you leave previous versions on the system to complete current studies. System Requirements: U.S. English Version of Microsoft Windows 7, 64 bit.net 4.5 Minimum monitor resolution: 1280x768 Minimum RAM: 2 GB Software Installation: To install inform on Windows 7: 1. Log in as an administrator 2. Close all open software programs 3. If you have not installed R, please download it from the PerkinElmer software downloads page and follow the installation instructions. 4. Double click on inform s Setup.exe 5. Follow the installer s instructions Software Activation: inform 2.2 is licensed software that must be activated for use of anything other than the viewer. If you are an existing inform 2.1 user, please install inform 2.2 on the same machine as your previous installations; no further action is necessary. If you have an earlier version of inform, please install inform 2.2 on the same machine as your previous installations. Start inform 2.2 and select License->Upgrade to upgrade your license. If this is a new install, please use the inform License application to activate your software, found in Start->All Programs->PerkinElmer->inForm->2.2.0->inForm License App inform Version 2.2 Factory information and synthetic library development for PerkinElmer Opal stains (ticket:1867) Ability to read slide patches from PerkinElmer whole slide.qptiff for non-quantitative processing and classifier training (tickets: ) Compact export of tissue and segmentation maps (ticket:1871) Compact export of components in PerkinElmer tiff format (ticket:1870) Composite is shown after unmix (ticket:1824) Default library colors can be changed in Prepare Images (ticket:1806) Support for non-factory filters in stain extraction (ticket:1810) Batch processing now works when using a UNC path (ticket:1845).im3 files can contain non-english characters in their path (ticket:1539)

2 Color, component, and composite toolbar shortcuts are enabled when on a table view (ticket:1823) Clearing the phenotype training will clear all results (ticket:1829) Phenotyping can handle images without cells (ticket:1832) Phenotyping can handle missing tissue segmentation (ticket:1839) Fixed rare cube timestamp reading issue (ticket:1844) Fix for error when deleting a manual tissue category (ticket:1849) Fix for compactness incorrectly reporting as N/A for very large cells (ticket:1869) Installer confirms that the correct version of R is installed (ticket:1868) Legacy projects from inform 0.4.2, 1.0, and have been deprecated; please load and.im3 files with CJK characters in the directory path may fail to load (ticket:1539) Algorithms must be developed with an image present to run in batch (ticket:1601) The Prepare Image button can be active with no image present (ticket:1605) Double-clicking on a large digital slide in the gallery view doesn t always switch to single view (ticket:1623) The Image Too Large dialog is repeatedly shown when converting projects (ticket:1624) Scale Across Layers does not work correctly if the images are not all preprocessed before export (ticket:1777) Stale score settings can cause a failure to segment cells (ticket:1778) The manual tissue segmentation fails to update correctly when deleting a category (ticket:1779) Image not removed from the training set when the last region is removed individually (ticket:1802) Canceling the spectral variability dialog during stain extraction shows a second variable stain dialog (ticket:1812) Phenotyping does not ignore images not in the processing set (ticket:1847) Long Nuance library filenames can cause the Prepare Images UI to be cropped (ticket:1885) Edit->Delete functionality is not working in editable text fields. (ticket:1886) inform Version Fix for license upgrade issue. All other features are unchanged. inform Version Spectral library development for brightfield and fluorescent samples (ticket:1691 to ticket:1708, ticket:1789) Synthetic library development for fluorescent samples (ticket:1470) Stain management (ticket:1625 to ticket:1664 and ticket:1666 to ticket:1687, ticket:1715 and 1795) Counterstain-based cell segmentation with DAB compensation (ticket:1486 to ticket:1493) Enable up to 4 membrane stains (ticket:1739) Cell Phenotyping (ticket:1720 to ticket:1738, ticket:1739 to ticket:1744, ticket:1718, 1748, 1749, and 1790) Pathology Views (ticket:1764, ticket:1765, ticket:1803) Markers can be added to spectra (ticket:1767, ticket:1792) Save spectral charts as Windows meta file Added batch logs for successful batch runs (ticket:1535) Better window resizing (ticket:1562) Make TRIO libraries viewable (ticket:1468)

3 Composite view editor would show the previous components (ticket:1745) Out of bounds exception on export (ticket:1719) Membrane segmentation had holes (ticket:1713) Leaking cytoplasm in cell segmentation (ticket:1710) Changed maroon to brown in the color dropdown list (ticket:1665) Fixed conversion problems for colocalization algorithms (ticket:1551) Fixed extraneous data export after conversion (ticket:1560) Draw error with differing images sizes (ticket:1590) Update stale editor icon (ticket:1598) Provide more space to view editor widgets (ticket:1599) Editing the export directory directly failed (ticket:1462) Legacy projects from inform 0.4.2, 1.0, and have been deprecated; please load and.im3 files with CJK characters in the directory path may fail to load (ticket:1539) Algorithms must be developed with an image present to run in batch (ticket:1601) The Prepare Image button can be active with no image present (ticket:1605) Double-clicking on a large digital slide in the gallery view doesn t always switch to single view (ticket:1623) The Image Too Large dialog is repeatedly shown when converting projects (ticket:1624) Scale Across Layers does not work correctly if the images are not all preprocessed before export (ticket:1777) Stale score settings can cause a failure to segment cells (ticket:1778) The manual tissue segmentation fails to update correctly when deleting a category (ticket:1779) Image not removed from the training set when the last region is removed individually (ticket:1802) Canceling the spectral variability dialog during stain extraction shows a second variable stain dialog (ticket:1812) inform Version Spectral Library viewing (ticket:1384 to ticket:1397) New units for brightfield and fluorescence unmixing (ticket:1522 to ticket:1524) Composite/Component view scaling based on selected images (ticket:1502 to ticket:1509, ticket:1526) The batch tab supports opening of projects along with algorithms (ticket:1513) View editor stays on top of the inform application Cell number is now displayed in the information tooltip (ticket:1511) What s new menu item that displays new features for the release (ticket:1525) Updated about box with PerkinElmer support phone number and link (ticket:1439) Read full spectral segment basis information if present in.im3 image file (ticket:1448) Tables are now sortable by column (ticket:1451) Remember the file type for right clicking on an image and saving (ticket:1512) Only allow scoring in categories where cell segmentation has happened (ticket:1530) Save algorithm dialog shows full path after cancelling overwrite (ticket:1366) Update error message for the training failed dialog (ticket:1386) Show the component data info tooltip even when there are no components (ticket:1369)

4 Aligned the group boxes on the view editor (ticket:1370) Disconnected mapped drive no longer causes a long delay in the slide browser dialog (ticket:1371) Image name not updated when data table is displayed (ticket:1375) Improved application performance in manual segmentation with many images (ticket:1377) Fixed the Discard If Touching an Edge check box to reflect state accurately (ticket:1378) Exporting RGB with score map now works (ticket:1379) Double clicking on an inform project now launches inform without errors (ticket:1441) Sample format was locked for im4 images (ticket:1442) Can now convert to optical density with brightfield RGB image (ticket:1443) Converting a project caused a null reference exception (ticket:1450) Batch table choices were not exporting (ticket:1457) Restrict use of deficient spectra with.im3 images (ticket:1482) Always open a project with the color image view (ticket:1510) Improved performance of the cell segmentation table (ticket:1514) Cell segmentation table was throwing a null reference exception (ticket:1532) Inconsistent colors in component view fixed (ticket:1533) Problem unmixing RGB image using Raw reported units (ticket:1536) The Discard If Touching an Edge check box now has a consistent location (ticket:1446) Toolbar no longer disabled after loading a project (ticket:1544) Legacy projects from inform 0.4.2, 1.0, and have been deprecated; please load and More than 65,536 objects will fail to write a cell or object map (ticket:1237) 32 bit systems will throw an out of memory exception when loading projects created on a 64 bit system that contain more than 20 images. (ticket:1274) Training regions sporadically do not fill in and vanish (ticket:1244).im3 files with CJK characters in the directory path may fail to load (ticket:1539) A strange series of actions can cause conversion problems for colocalization algorithms (ticket:1551) Under certain conditions after converting a project, the export step exports items from the original project before the conversion (ticket:1560) inform Version Updated table headings and axes precision (ticket:639, ticket:1108) Update the gallery right-click menu (ticket:1275) Use N/A values in table output for improved import into Spotfire and R (ticket:1339) Use different region IDs for each tissue category (ticket:1340) New ability to read in 3DH compressed images (ticket:1358) Allow simple threshold with process regions (ticket:1153) Provide the Equal RGB checkbox only when appropriate (ticket:1160) Update active buttons, highlighting, and tab order (ticket:1205, ticket:1307, ticket:1318) Report when the maximum generated regions has been reached (ticket:1238) Fix the creation/erasing of threshold regions with MCP (ticket:1284) Remove an extraneous dialog (ticket:1289) Update the scores when changing from single to double pos (ticket:1297) Close the popup editor when a new project is created (ticket:1298) Correct the white picker cursor in 120 DPI (ticket:1312) Update error message, tool tips (ticket:1316, ticket:1323, ticket:1367)

5 Select radio buttons by default in the new project editor (ticket:1317) Update too-strict image loading rules (ticket:1319) Fix the off-by-1 region number in the interrogator controller (ticket:1321) Corrected image edges when zoomed in (ticket:1324) Fixed 120 DPI GUI issues (ticket:1325) Link the view editor help to the correct section (ticket:1326, ticket:1329) Remove the configure button in the viewer (ticket:1328) Correct the batch log time (Local, not UTC) (ticket:1330) Loaded coloc projects should only have sliders for the user components (ticket:1331) Correctly load the false color setting for composite (ticket:1332) Make the project dirty when deleting a process region (ticket:1336) Do not show tissue columns when there is no tissue seg (ticket:1337) Make the export directory does not exist dialog dismissable (ticket:1338) Update the tables after project configuration (ticket:1342) Export all columns from the coloc quantitation table (ticket:1346) Gracefully shut down when access to a project is terminated (ticket:1347) Correctly calculate process region membership and count data values when processing regions or tissue regions are used (ticket:1349, ticket:1350) Clip cell compartments correctly (ticket:1351) Fail gracefully when images cannot be found (ticket:1352) Fix 1:2 upsampling thumbnails (ticket:1356) Correct right click delete region in single view (ticket:1357) Show the data export table in batch (ticket:1360) Legacy projects from inform 0.4.2, 1.0, and have been deprecated; please load and More than 65,536 objects will fail to write a cell or object map (ticket:1237) 32 bit systems will throw an out of memory exception when loading projects created on a 64 bit system that contain more than 20 images. (ticket:1274) Training regions sporadically do not fill in and vanish (ticket:1244) inform Version New Custom Project Configuration New levels of functionality: inform Viewer, inform Basic Analysis, inform Cell Analysis, and inform Tissue Finder with upgrading capability New Processing Steps: Threshold, Colocalization, Manual Tissue Segmentation New Cube and Component Visualization Tools New Composite View and Visualization Tools New H-Score and Visualization within Scoring New Table Export Format and Additional Statistics Improved Cell Rendering Improved Component Rendering Improved mandatory field notification Improved thumbnail rendering Improved Gallery selection and ability to save images Improved size requirements allow inform to run on smaller monitors Improved tooltips within the application New Region Numbers for Processing Regions Updated Graphic design Enabled loading of Vectra slides for batch processing Enabled zoom to full functionality

6 Corrected the mouse offset when zooming in/out at long distances (#649) Corrected drawing errors at the edge of zoomed in images (#527) Changed Brightfield signal scaling default to autoscale (#675) Corrected default values for scoring (#676) Corrected the white picker selection region Corrected filenames and training image folder issues when names had. in them (#725) Corrected view editor GUI problems (#569, #717) Editor selection no longer causes projects to need saving (#620) Minimized calculation differences between 32 and 64 bit (#720) Merge now handles drive letter changes gracefully (#727) Improved error messages to pinpoint processing failure (#737) Corrected the Prepare Images editor s locking of the TRIO dropdown (#774) Corrected text overrun in the licensing dialog (#881) Corrected default browse location when inform was launched from a project or algorithm, using an RGB library (#888, 889) Corrected the inform RGB export to use the view settings (#944) Corrected Data reading error with a multi-filter acquisition with only one filter segment (#1259) Legacy projects from inform 0.4.2, 1.0, and have been deprecated; please load and When changing from one scoring type to another, the scoring image will be stale until processed again (#1297) 32 bit systems will throw an out of memory exception when loading projects created on a 64 bit system that contain more than 20 images. (#1274) Training regions sporadically do not fill in and vanish (#1244) The region ID in the pixel value controller is off by 1 (#1321) Commandline help starts the application (#1322) Support: Contact PerkinElmer Technical Support by phone or online. Phone: option 3 Global.TechSupport@perkinelmer.com Support Website: