CURRENT TRANSFORMERS RANGE NANO SERIES - STANDARD CLASSES

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "CURRENT TRANSFORMERS RANGE NANO SERIES - STANDARD CLASSES"

Transcription

1 CURRENT TRNSFORMERS RNGE NNO SERIES - STNDRD CLSSES SINGLE PHSE THREE PHSE TCSNT TCSNT TCSNPD E TCSNPD TCSNPDE TCSNPD TCSND TCSND TCSND TCSND TCSND TCSN TCSN TCSN TCSN TCSN TCSN TCSN TCSN TCSN TCSN TYPE EXECUTION 0x0 0x0 0x0 0x 0x x x 0x 0x x x 0x 0x x 0x 0x x (<00) x (0/00) x included x (x) HORIZ. BR 0 mm mm mm mm mm mm mm x (0 mm) x ( mm) CBLE x x (x0) CENTRL SECTION VERTICL BR Primary (),,,,,,, 0,,,,,,, 0,,,, ,, , 7 9, 7, , 0, Height Width Depth interaxis min. Dimensions

2 SINGLE PHSE Dimensions TYPE EXECUTION CENTRL SECTION HORIZ. BR VERTICL BR CBLE Primary () Height Width Depth interaxis min , , 0 7, 7 7, TCSN TCSN TCSNV TCSNV TCSNV TCSNV x(0x) x0 0x0 0x0 0x0 x0 0x0 x TCSN0 0 mm TCSN 0x 0x

3 PPLICTION The CT makes it possible to measure high values, and indicate, these using instruments of much lower ratings. Owing to the high costs of the cable, we recommend the use of a CT for measurement above (unless otherwise specified. ) THERMIC CURRENT (Ith) Is the highest (effective value) that the CT can support for second, without damage, owing to excessive overloads, with secondary short circuited. DYNMIC CURRENT (Idyn) Is the highest (peak value) that the CT can support for second, without damage, owing to electromagnetic efforts, with secondary short circuited. HIGHEST VOLTGE LIMIT RNGE Is the highest voltage (effective value) that the CT can support. GENERL DESCRIPTION TEST VOLTGE Is the voltage that the CT can support (at industrial frequency, for the insulation reference) for minute between and secondary. STURTION FCTOR(Fs) - SFETY FCTOR(n) Is the ratio between the value that causes the magnetic core saturation and the nominal value. The lower is the "n" value, better the instrument is protected. RTED BURDEN OF COPPER WIRES BETWEEN INSTRUMENT ND CT Secondary of Secondary of Section of cable mm (two poles) V Section of cable mm (two poles) V Distance m m m m m m,,,,,77 0, 0,7,,,,7 0, 0, 0,9,,79, 0, 0,0 0,0 0,9,9,9 0,09 0, 0, 0,7 0,9 Distance m m m 0 m 0 m 0 m 0, 0,7,,,,7 0, 0, 0,9,9,, 0, 0,9 7 0,,, 0,09 0, 0, 0,7 0,9 0,0 0, 0, 0, 0, 0,0 0,0 0,07 0, 0, 0,9 0,,,,, LOD ON COPPER BRS according DIN and 7 standards Bar dimension Nominal (In) mm bar bars bars x 0 x x x x 90 x x 0x x 790 0x ERRORS CURVE CCURCY CLSS - ccuracy class for kwh-meters - ccuracy class for measurement and non tariff kwh-meters - ccuracy class for relays and protection The and the angle errors according IEC, VDE-0 and UNE- standards, are as follows: Ratio error limits in % 0,0 In 0, In In, In ± ± 0,7 ± ± ± ±, ± ± from In to, In = ± ngle error limits in % 0,0 In 0, In In, In ±, ±, ± 0,9 ± 0,9 ±, ±,7 ±, ±, no prescription 7

4 TECHNICL SPECIFICTIONS Case in BS -V0 resin Secondary : standard (other secondary rating on request) Maximum service voltage for insulation:, kv (0,7 kv for mini series and TCS ) Testing voltage. kv at 0 Hz for minute ( kv for mini series and TCS ) Nominal thermic short circuit : (I th ): 0 IpN for second ( IpN for types TRPD / TRPDE) Nominal dynamic short circuit : (I din ):, I th for second Permanent overloading % Icth Safety factor(fs): from to following the types and the range Normal functioning frequency 0/0 Hz Construction according to the CEI EN 00- (-) Insulation in air, E (IEC ) for models TR Terminals: P - P (K - L) secondary s - s (k - l) For double ratio on secondary: s - s = low value P (K) winding input P (L) winding output s - s = high value s (k) secondary winding input s (l) secondary winding output Material: Brass (CuZn7). The screws Mx have: torsion value=,9 Nm, traction value = N/mm and elasticity limit = N/mm Degree of protection: IP0 Conditions when used: mbient temperature - C + C, for types TRPD and TCS; - C +0 C for all other types Maximum temperature on the bars C, Storage temperature - C +0 C, Relative humidity 0% - During the installation make sure of the exact input dirction (P - K) and output (P - L) of the cable. - In the case of the types with and secondary cables on terminals, do not invert the connection of the cable with the secondary one. - If is necessary to disconnect the measuring instruments from the CT while operating it is necessary to make a short circuit between the two terminals of the secondary on the CT. - It is recommended to ground the CTs LTERNTIVE OPTIONS Secondary Other ratios and/or performances Tropicalisation Transformers with class 0, - 0,S - S Internal or calibration certifications HOW THE DIMETER OF CBLE IS CLCULTED In order to calculate the diameter of a 9 mm, it is necessary to refer to the following formule: Section = r x r x, that is r x, from which r = section /, r = 9 /, = 0, =, mm and therefore the radius is, mm Diameter = r + r and therefore Diameter, +, mm = mm (diameter of the only leg to which is added the diameter of the insulating material, Ø total diameter of about mm) By looping the cable through the tranformers, the is halved, without effecting the performance or class. EXMPLE : TR D 0/ normal becomes 0/ with loops becomes 0/ with loops FIXING SYSTEMS ON DIN RIL NNO SERIES BSE MOUNTED TO CBLE OR BUS BR ON DIN RIL MINI SERIES BSE MOUNTED TO CBLE OR BUS BR ON DIN RIL SMLL SERIES BSE MOUNTED TO CBLE OR BUS BR ON DIN RIL STNDRD SERIES BSE MOUNTED TO CBLE OR BUS BR

5 WIRES CONNECTION NNO SERIES WITH METL POINT CBLE TERMINL MINI SERIES WITH FST-ON (, mm) METL POINT CBLE TERMINL SMLL SERIES METL FORK CBLE TERMINL FIXING OF TERMINLS COVER ND LED SEL WITH FST-ON (, mm) direction STNDRD SERIES METL FORK CBLE TERMINL WITH FST-ON (, mm) FIXING OF TERMINLS COVER ND LED SEL direction direction CCESSORIES FOR LL MODELS SCT (SCT FOR NNO SERIES) For measuring CT secondary this protection is available for burdens up to V maximum For measuring CT secondary this protection is available for burdens up to 0V maximum For protection CT ask in factory before ordering Electronic circuit for automatic protection against dangers caused by the deconnections of secondary terminals of transformers (open circuit). It automatically makes a short circuit on the secondary winding in case of accidental loss of load. Residual voltage on terminals remains lower than V RMS (safety limit valid on all uses - PELV SELV FELV). In standard use, if nominal voltage is not higher than V in C and 0V in DC, the system grants the double protection against direct and indirect contacts. The intervention is instantaneous and the voltage on the secondary terminals of transformers in limited up to V RMS; when the normal working conditions will be restored the electronic circuit stops its action and its influence to the transformers stops also. Completely static it is composed by few essential components assuring long time duration. Standards: IEC0; IEC7..; IEC. / CEI--; CEI...; CEI.. - CEI. - CEI7.. - CEI7.. Characteristics: reduced installation costs; possibility to take out the connected device without precautions or safety risks; the electronic circuit is self supplied by the secondary terminals in case of load loss only; in standard and nominal working conditions the device doesn t influence the correct function of transformers pplications: where it is necessary to increase the safety coefficient; places with fire risk, explosion risk, high humidity level, hospitals; mines and quarries; naval use; military use; electrical situation on which not qualified people is present; modular boards with high safety level; low or extremely low voltage applications Intervention on positive and negative semi waves. ELECTRONIC PROTECTION (PTENTED) SCT NEW S.C.T. SECURITY CURRENT TRNSFORMER SCT 9

6 NNO SERIES - CURRENT TRNSFORMERS Fixing system: to wall or to DIN rail by an accessory; directly to cable by screws Secondary on request Sealable terminal covers on request (not for three phase models) In case of boxes resistant to high temperatures (0 C) add suffix...rt to the standard code (materiall used is VMPMID 0 VO P0) THREE PHSE TCSNT The double terminal entry allows short circuit links to be fitted when it is necessary to disconnect the measuring instrument from the transformer without damage to the CT, or for easier termination to ground of the CT Different characteristics on request Primary passing transformer, wires mm each ø,,, 0 class class class class class class secondary secondary secondary code V code V code V secondary secondary secondary code V code V code V , TCSNT 0 TCSNT 7 TCSNT 0 TCSNT 0, TCSNT, , TCSNT 0 TCSNT 0 TCSNT 0 TCSNT, TCSNT Primary passing transformer, wires 0mm each or bars x mm 0, 0 class class class class class class 00 0 secondary secondary secondary code V code V code V TCSNT 00 TCSNT SINGLE PHSE TCSNPDE secondary secondary secondary code V code V code V TCSNT 00 TCSNT 00 Transformer with wound cable, and secondary s on the terminals 7 P S P S 0 class class class class class class secondary secondary secondary code V code V code V TCSNPDE TCSNPDE TCSNPDE TCSNPDE 0 secondary secondary secondary code V code V code V TCSNPDE TCSNPDE TCSNPDE 0 TCSNPDE

LOW VOLTAGE TRANSFORMERS SHUNTS

LOW VOLTAGE TRANSFORMERS SHUNTS LOW VOLTGE TRNSFORMERS SUMMRIZING TBLES........................................................................ 4 GENERL DESCRIPTION........................................................................

More information

Measurement devices Accessories for analogue and digital instruments

Measurement devices Accessories for analogue and digital instruments Accessories for analogue and digital instruments 1 2CSC96F0001 Current transformers Used to transform primary currents (max. 6000 A) into.../5 A and.../1 A low secondary currents indirectly supplying power

More information

Redefine Innovative Metering. Current. Transformers

Redefine Innovative Metering. Current. Transformers Current Transformers ZIEGLER CURRENT TRANSFORMER SERIES Ziegler Instruments, leader in measuring instruments unveils its world class plastic cased Square and Round Current Transformers. Ziegler Current

More information

Current Transformer Voltage Transformer. Content

Current Transformer Voltage Transformer. Content Current Transformer Voltage Transformer Content Common technical description 1 Summary with rated output 2-4 Tube current transformer 5 Plug-In current transformer 5-8 Wound current transformer 9 Summation

More information

New Current Transformers Narrow profile

New Current Transformers Narrow profile ew ew is pleased to introduce its new line of of narrow profile, for primary nominal currents from 30 A up to 4000 A, classes 0., and 3. Adapted to the needs of customers, these new have multiple advantages.

More information

CT Current transformers Ideal for measuring. Designed to create efficiency.

CT Current transformers Ideal for measuring. Designed to create efficiency. CT Current transformers Ideal for measuring. Designed to create efficiency. CT Current transformers Optimize consumptions. Improve the efficiency. Energy efficiency, minimized costs and high system availability

More information

Current transformers (CT) & Shunts

Current transformers (CT) & Shunts Current transformers (CT) & Shunts Genreal overview LV CURRENT TRANSFORMERS Product selection guide Standard industrial transformers?????? TCR - TCRO range NEW 9 9 9 Current summation JVM 0 9 TCR usbar

More information

RE7TL11BU on-delay timing relay s - 24 V AC DC - 1OC

RE7TL11BU on-delay timing relay s - 24 V AC DC - 1OC Characteristics on-delay timing relay - 0.05..1 s - 24 V AC DC - 1OC Main Commercial Status Range of product Product or component type Component name Time delay type Time delay range [Us] rated supply

More information

LOW-VOLTAGE CURRENT TRANSFORMERS

LOW-VOLTAGE CURRENT TRANSFORMERS LOWVOLTAGE CURRENT TRANSFORMERS 5 A Power network meters ND0 and ND type. N4Z and N5Z Tel: (+48 68) 45 75 39; 45 75 305; 45 75 3; 45 75 368; email: export@lumel.com.pl ul. Słubicka 657 Zielona Góra CONTENTS

More information

RM4TG20 three-phase network control relay RM4-T - range 200..500 V

RM4TG20 three-phase network control relay RM4-T - range 200..500 V Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking

More information

LOW-VOLTAGE CURRENT TRANSFORMERS

LOW-VOLTAGE CURRENT TRANSFORMERS LOW-VOLTAGE CURRENT TRANSFORMERS Power network www.lumel.com.pl CONTENTS General specifica on of low-voltage current transformers...3 LCTM - wound primary series...5 LCTR - round conductor series...6 LCTB

More information

Miniature circuit breakers

Miniature circuit breakers Miniature circuit breakers Din-T series ka MCB Standard AS/NZS 898 ) Approval No. N78 Short circuit breaking capacity - 000 Amps Current range 0.5 - Amps,, and pole Sealable and lockable handle Modular

More information

Tape Wound, Split Core and Ebony Current Transformers

Tape Wound, Split Core and Ebony Current Transformers Tape Wound, Split Core and Ebony Current Transformers Current Transformers Contents Page Tape Wound Measuring and Protection Current Transformers 2 6 Split Core Current Transformers 7 9 3-in-1 Current

More information

Tape Wound, Split Core and Ebony Current Transformers

Tape Wound, Split Core and Ebony Current Transformers Tape Wound, Split Core and Ebony Current Transformers Table of contents Tape Wound Measuring and Protection Current Transformers 2 MR Series Measuring Range 3 PR Series Protection Range 4 Class PX Current

More information

RM4TR32 three-phase network control relay RM4-T - range V

RM4TR32 three-phase network control relay RM4-T - range V Characteristics three-phase network control relay RM4-T - range 300..430 V Complementary [Us] rated supply voltage Control threshold undervoltage Control threshold overvoltage Output contacts Main Range

More information

keep your measure under control

keep your measure under control INSTRUMENTACIÓN INDUSTRIAL ZURC, S.A. keep your measure under control CURRENT For measuring instruments. Mounted in selfexinguishing, plastic, strengthened cases. Isolation voltage V Made as per UNEEN

More information

Technical documentation. Summation current transformers, type KSU/SUSK. Document no.: A

Technical documentation. Summation current transformers, type KSU/SUSK. Document no.: A Technical documentation Summation current transformers, type KSU/SUSK Document no.: 4921210113A Low voltage current transformers for industrial applications Summation current transformers KSU page 6 Summation

More information

QUINT-PS AC/24DC/40

QUINT-PS AC/24DC/40 Extract from the online catalog QUINT-PS-100-240AC/24DC/40 Order No.: 2938879 DIN rail power supply unit 24 V DC/40 A, primary switched-mode, 1- phase. Commercial data EAN 4017918987091 Pack 1 pcs. Customs

More information

CROMPTON INSTRUMENTS CURRENT TRANSFORMERS ENERGY /// CROMPTON-INSTRUMENTS.COM/CT.HTML

CROMPTON INSTRUMENTS CURRENT TRANSFORMERS ENERGY /// CROMPTON-INSTRUMENTS.COM/CT.HTML CROMPTON INSTRUMENTS CURRENT TRANSFORMERS CONTENTS Tape Wound Measuring and Protection Current Transformers... 2 MR Series Measuring Range... 3 PR Series Protection Range... 4 Class PX Current Transformers...

More information

H/L = Power supply. FN = Nominal Frequency. RN = Rated value of output burden. UN = Nominal input voltage. IN = Nominal input current.

H/L = Power supply. FN = Nominal Frequency. RN = Rated value of output burden. UN = Nominal input voltage. IN = Nominal input current. Application : The transducer RISH CON - CA/CV (Fig.1) converts a sinusoidal AC Current or AC Voltage into a load independent DC Current or a load independent DC Voltage proportional to the measured value.

More information

MINI-PS AC/24DC/1.3

MINI-PS AC/24DC/1.3 Power supply unit INTERFACE Data sheet 102894_en_02 1 Description PHOENIX CONTACT 2010-12-27 Features MINI POWER is the extremely slim power supply unit with constructional widths of 22.5 mm, 45 mm and

More information

Low Voltage Capacitor LVCP. The new choice for Power Factor Correction

Low Voltage Capacitor LVCP. The new choice for Power Factor Correction Low Voltage Capacitor LVCP The new choice for Power Factor Correction LVCP : the new choice for Power Factor Correction The LVCP is a compact and powerful capacitor. It offers high modularity, unmatched

More information

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage

More information

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.

More information

Measurement and Instrumentation

Measurement and Instrumentation POWER QUALITY ENERGY PERFORMANCE Measurement and Instrumentation Transformers and shunts Transformers Overview of ranges Selection guide Info & advice Standard industrial transformers TCR TCRO ranges Adaptable

More information

Medium-voltage transformers

Medium-voltage transformers Medium-voltage transformers We make energy measurable and take care of your future www.mbs-ag.com Page 2 E-Mail: info@mbs-ag.com Web: www.mbs-ag.com Contents Current transformers Technical characteristics

More information

TRANSFORMER TSA TYPE

TRANSFORMER TSA TYPE PRODUCT LEAFLET TRANSFORMER TSA TYPE Transformers for 950 V network (from 3 to 16 kva) 1 60 20752-01/06/2012 Transformers for supplying equipments away Type TSA transformers are used to power the receivers

More information

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff

More information

RM17UAS. Main. Product or component type. Product specific application. Relay monitored parameters

RM17UAS. Main. Product or component type. Product specific application. Relay monitored parameters Characteristics voltage control relay RM17-U - range 65..260 V AC Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main Range of

More information

Fiber Optics Current Sensor Free Standing Enabling smart grids and digital substations

Fiber Optics Current Sensor Free Standing Enabling smart grids and digital substations Fiber Optics Current Sensor Free Standing Enabling smart grids and digital substations Content ABB Global Technology Leader ABB HV Products Portfolio Instrument Transformers ABB HV Products Portfolio Current

More information

n Choice of equipment SP 58 Index of protection: IP 2X - IP 2XC - under front plate

n Choice of equipment SP 58 Index of protection: IP 2X - IP 2XC - under front plate SP fuse carriers with protected terminals SP fuse carriers with protected terminals www.klinkmann.com n Choice of equipment Maximum cartridge rating Type Rated current 400 V± 0 V± 690 V± gg am gg am gg

More information

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order

More information

A 1. Miniature circuit breakers. Series E E3000 NE3000 E4500 E6000 Extensions. Series C C3000 / C4500 / C6000. Series G. Series Hti Hti10000 (MD125)

A 1. Miniature circuit breakers. Series E E3000 NE3000 E4500 E6000 Extensions. Series C C3000 / C4500 / C6000. Series G. Series Hti Hti10000 (MD125) Miniature circuit breakers.6.2 Series E E3000 NE3000 E4500 E6000 Extensions dd-on RCD s Display contacts Shunt trips Tele L Undervoltage release mu Busbar systems ccessories Series C C3000 / C4500 / C6000

More information

FEATURES FR Grade GF Polycarbonate UL 94VO : Swivel Captive Fasteners Slim Line Bezel : Vertical Mounting Standard Glass Window : IP 52 Enclosure

FEATURES FR Grade GF Polycarbonate UL 94VO : Swivel Captive Fasteners Slim Line Bezel : Vertical Mounting Standard Glass Window : IP 52 Enclosure ANALOG PANEL METERS The movements are strongly constructed incorporating Synthetic Sapphire Jewel Bearings, Hard Chrome Plated, Highly Polished Pivot and Phosphor Bronze Cadmium Copper Hair Springs. Moving

More information

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main

More information

T Transformer test set

T Transformer test set Transformer test set Multi function system for testing substation equipment such as: current, voltage and power transformers, over-current protection relays, energy meters and transducers Primary injection

More information

Digital Energy ITI. Instrument Transformer Basic Technical Information and Application

Digital Energy ITI. Instrument Transformer Basic Technical Information and Application g Digital Energy ITI Instrument Transformer Basic Technical Information and Application Table of Contents DEFINITIONS AND FUNCTIONS CONSTRUCTION FEATURES MAGNETIC CIRCUITS RATING AND RATIO CURRENT TRANSFORMER

More information

2. VOLTAGE TRANSFORMERS Support type Support type with fuse Touch-proof type

2. VOLTAGE TRANSFORMERS Support type Support type with fuse Touch-proof type 2. VOLTGE TRSFORMERS Support type Support type with fuse Touch-proof type 16 Instrument trnsformers Medium voltge indoor 2. VOLTGE TRSFORMERS ITRODUCTIO Voltge trnsformers reduce the voltge in the medium

More information

Z-TRAUQ INC. Tel.: (450)226-6997 Fax: (450)226-5837 z-trauq@qc.aira.com

Z-TRAUQ INC. Tel.: (450)226-6997 Fax: (450)226-5837 z-trauq@qc.aira.com CURRENT TRANSFORMER MODEL J " x 7" PAGE No 2-2 REV 8DEC00 TERMINAL OPTION LEAD WIRE OPTION 8-2 BRASS SCREW TERMINALS (2 PLACES) SEE NOTE 9 6 9 8 6 Ø 2 9 (4 PLACES) UL 05 #6 AWG LEAD WIRE, STANDARD LENGTH

More information

E-STOP relays, safety gate monitors

E-STOP relays, safety gate monitors Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 1 semiconductor output Connection

More information

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Current transducer LF 21-S I PN = 2 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated

More information

Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1

Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1 Power Supply Unit, Primary Switched, Narrow Design MINI POWER provides: Extra narrow design with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide-range input

More information

Plug on Type MCBs & Distribution Boards. Intelligent Choice for Prestigious Buildings

Plug on Type MCBs & Distribution Boards. Intelligent Choice for Prestigious Buildings Plug on Type MCBs & Distribution Boards Intelligent Choice for Prestigious Buildings Table of Contents QO Series Miniature Circuit Breakers Specifications QOvsRCBO Residual Current Circuit Breakers with

More information

Technical data UNIBLOCK UBSF 180 625

Technical data UNIBLOCK UBSF 180 625 Data TECHNICL DT Technical data UNIBLOCK UBSF 80 6 Output data Type UBSF 80 UBSF 0 UBSF 00 UBSF 6 Output power 80 kv 0 kv 00 kv 6 kv Output voltage 80/77 V 0/ V 0/ V 0/ V Output current 7 8 66 80 Power

More information

Dry type transformers with air insulated MV windings

Dry type transformers with air insulated MV windings E N G L I S H Dry type transformers with air insulated MV windings TTR TTO OTN, OTR, OTF reactors TTH Technology Magnetic Core The core is made of grain oriented magnetic sheets characterized by high permeability

More information

LED Driver Linear / area fixed output

LED Driver Linear / area fixed output Driver LC W /3/3/7/mA fixc lp SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current, 3, 3, 7 or 1, ma Max. output power W For luminaires of

More information

Zucchini MS - LOW TO MEDiuM POWER busbar

Zucchini MS - LOW TO MEDiuM POWER busbar Zucchini MS - LOW TO MEDiuM POWER busbar The lexibility of the Zucchini MS range during planning and installation makes it ideal for frequently changing requirements in small to medium sized commercial

More information

INSULATION MONITORING DEVICES

INSULATION MONITORING DEVICES 1 / 8 INDEX: Technical specifications VA40...2 Technical specifications TI1...3 Technical specifications CR5...4 Installation, configuration and use...5 2 / 8 1- INSULATION MONITORING RELAY VA40 1.1- Functions:

More information

55 SERIES. General purpose relays 7 to 10 A General purpose relays For printed circuit mounting. Type Type Type 55.

55 SERIES. General purpose relays 7 to 10 A General purpose relays For printed circuit mounting. Type Type Type 55. 55 General purpose relays 7 to 10 55 General purpose relays For printed circuit mounting 55.12 55.13 55.14 Type 55.12 -- 2 CO 10 Type 55.13 -- 3 CO 10 Type 55.14 -- 4 CO 7 C & DC coils Cadmium Free contacts

More information

MODULE DC/DC CONVERTERS

MODULE DC/DC CONVERTERS MODULE DC/DC CONVERTERS DC/DC AC & DC POWER SOLUTIONS APPLICATION DC/DC converters are designed to convert the voltage from a power source to the voltage required by load devices. They enable regulation

More information

UCI224F - Winding 17. Technical Data Sheet

UCI224F - Winding 17. Technical Data Sheet - Winding 17 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 34 and the relevant section of other international standards such as BS5000,

More information

The complete range of consumer switchboards and switchgear

The complete range of consumer switchboards and switchgear Power Distribution The complete range of consumer switchboards and switchgear www.nhp.com.au/mod6 The MOD6 range of consumer switchboards and switchgear is specifically designed for domestic and commercial

More information

LOW VOLTAGE RING TYPE MEASURING CURRENT TRANSFORMERS

LOW VOLTAGE RING TYPE MEASURING CURRENT TRANSFORMERS Specification for LOW VOLTAGE RING TYPE MEASURING CURRENT TRANSFORMERS CEYLON ELECTRICITY BOARD SRI LANKA Specification for LOW VOLTAGE RING TYPE MEASURING CURRENT TRANSFORMERS CEB Standard 027: 1998 CEYLON

More information

WDG 12 - Technical Data Sheet

WDG 12 - Technical Data Sheet LV 804 S WDG 12 - Technical Data Sheet FRAME LV 804 S SPECIFICATIONS & OPTIONS STANDARDS Cummins Generator Technologies industrial generators meet the requirements of BS EN 60034 and the relevant sections

More information

PHOENIX CONTACT

PHOENIX CONTACT Thermomagnetic circuit breakers CLIPLINE Data sheet 103943_en_04 PHOENIX CONTACT 2010-08-18 1 Description The UT 6-TMC M circuit breaker is a single-position overload circuit breaker with thermomagnetic

More information

UCI274E - Technical Data Sheet

UCI274E - Technical Data Sheet - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,

More information

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Class 525/580 CONTENTS Description Page General characteristics............................................... 1 Circuit breaker......................................................

More information

C60H-DC C curve. Catalogue numbers. Operating voltage V DC V DC

C60H-DC C curve. Catalogue numbers. Operating voltage V DC V DC distriution systems PB104013-34 The supplementary protectors are used in direct current circuits (Industrial control and automations, transport, renewale energy...). They comine the following functions

More information

DSD 25 Three Channels & Four Channels Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155

DSD 25 Three Channels & Four Channels Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 DSD 25 Three Channels & Four Channels Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 Technical information Version: 08.12.15 General Function Technical data Supply voltage V1

More information

Data sheet: Safety isolating transformers type APT

Data sheet: Safety isolating transformers type APT Data sheet: Safety isolating transformers type APT -------------------------- Description...: safety isolating transformer constructed and tested according to VDE 0570/EN 61 558 ; UL506 ; CSA 22.2 Test

More information

R.C.C.B. s two-pole LEXIC

R.C.C.B. s two-pole LEXIC 87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...

More information

IFC 100. Quick Start. Signal converter for electromagnetic flowmeters

IFC 100. Quick Start. Signal converter for electromagnetic flowmeters Quick Start Signal converter for electromagnetic flowmeters General safety notes You can find the newest and/or additional information on the CD-ROM provided, in the handbook, the datasheet, special manuals,

More information

K1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm

K1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm Characteristics cam ammeter switch - 3 circuits - 90-12 A - for Ø 22 mm Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product

More information

K1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm

K1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm Characteristics cam ammeter switch - 3 circuits - 90-12 A - for Ø 22 mm Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product

More information

Single direction synchronous geared motors

Single direction synchronous geared motors Single direction synchronous geared motors 0.5 Nm 3.5 Watts Mechanical strength : 0.5 Nm Constant speed, dependent on supply frequency Wide range of speeds available Direction of rotation controlled by

More information

RISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features:

RISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features: Application : RISH Master 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network & replaces the multiple analog

More information

Vario-Series Accessories

Vario-Series Accessories Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates

More information

Low voltage products. Low voltage current transformers type: IMW, IMP, IMS, ISW, INSOA, IMR

Low voltage products. Low voltage current transformers type: IMW, IMP, IMS, ISW, INSOA, IMR Low voltage products Low voltage current transformers type: IMW, IMP, IMS, ISW, INSOA, IMR Low voltage current transformers type: IMW, IMP, IMS, ISW, INSOA, IMR INDEX General information Application...3

More information

VALVES N.C. FOR REFRIGERATING SYSTEMS

VALVES N.C. FOR REFRIGERATING SYSTEMS SOLENOID VALVES 11 VALVES N.C. FOR REFRIGERATING SYSTEMS APPLICATIONS The valves illustrated herein are designed for use with refrigerant fluids CFC, HCFC and HFC. OPERATION All valves are normally closed

More information

60120 Circuit Breaker

60120 Circuit Breaker 6020 Circuit Breaker United States MINIATURE CIRCUIT BREAKER, 20/240VAC, 2A, CIRCUIT BREAKER TYPE: STANDARD Image not available Product Information Ordering and Shipping Information Features and Specifications

More information

Current transformer selection guide

Current transformer selection guide The selection of a current transformer is a simple task. There are four phases in the selection procedure. Current transformer selection guide KEEP IN MIND efine customer requirements based on the primary

More information

MCCB Distribution Panel

MCCB Distribution Panel The Power of Technology MCCB Distribution Panel Range : 4, 6, 8, 10 & 12 ways. Incoming 160A / 250A / 400A / 630A. Outgoing 160A / 250A No. of poles of MCCB 3 / 4. Fully shrouded bus bar with high short

More information

Instrument Transformers By: Kiran Kelapure

Instrument Transformers By: Kiran Kelapure Yadav Measurements Pvt. Ltd. Instrument Transformers By: Kiran Kelapure A specifically designed programme for Da Afghanistan Breshna Sherkat (DABS) Afghanistan 1 Electricity Metering technologies and systems

More information

2 pole, 10 A power contacts 8 pin plug-in

2 pole, 10 A power contacts 8 pin plug-in 60 General purpose relays 6-10 60 Plug-in mount 10 General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils UL Listing (certain relay/socket combinations)

More information

Measurement devices from 5 to 5000 A

Measurement devices from 5 to 5000 A The solution for Current transformers > ndustry > Office buildings trafo_108_a_1_cat Three-phase CT trafo_012_a_1_cat Strong points Bar-through CT > An adapted accuracy class > A wide range of ratings

More information

energy management systems Current Transformers

energy management systems Current Transformers energy management systems 05 Current Transformers CURRENT TRANSFORMERS Current transformers with analogue output page 5/1 Busbars page 5/5 Current transformers - ic Line page 5/6 Protective current transformers

More information

Thyristor-controlled power supplies and battery chargers

Thyristor-controlled power supplies and battery chargers Thyristor-controlled power supplies and battery chargers Input voltage: 115 / 230 VAC, single phase, 50 / 60 Hz or 208 / 400 / 480 VAC, three phases, 50 / 60 Hz Output voltage: 12 / 24 / 48 / 60 / 72 /

More information

K1H014MLH cam ammeter switch - 4 circuits A - screw mounting

K1H014MLH cam ammeter switch - 4 circuits A - screw mounting Characteristics cam ammeter switch - 4 circuits - 90-12 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting Fixing

More information

Series C H y d r a u l i c - M agnetic Circuit Breakers

Series C H y d r a u l i c - M agnetic Circuit Breakers Series C H y d r a u l i c - M agnetic Circuit Breakers Compact E-Frame circuit breaker Single and multipole VDE/UL/CSA recognized UL 489 listed to 10000 A International Approvals Ratings: 0.1 A to 100

More information

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of

More information

/ Maximum flexibility for the applications of tomorrow. / Open data communication. / Smart Grid Ready

/ Maximum flexibility for the applications of tomorrow. / Open data communication. / Smart Grid Ready / Perfect Welding / Solar Energy / Perfect Charging Fronius Symo / Maximum flexibility for the applications of tomorrow. / PC board replacement process / Mounting system / WLAN interface / Open data communication

More information

Energy Management Energy Meter Type EM23 DIN

Energy Management Energy Meter Type EM23 DIN Energy Management Energy Meter Type EM23 DIN Class 1 (kwh) according to EN62053-21 Class B (kwh) according to EN50470-3 Class 2 (kvarh) according to EN62053-23 Accuracy ±0.5 RDG (current/voltage) Energy

More information

E-STOP relays, safety gate monitors

E-STOP relays, safety gate monitors Unit features Safety features Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided

More information

41 Series - Low profile PCB relays A. Features Plug-in / PCB Relays

41 Series - Low profile PCB relays A. Features Plug-in / PCB Relays Series - Low profile PCB relays 8-12 - 16 A 41 Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16

More information

PANEL METER N15Z TYPE

PANEL METER N15Z TYPE PANEL METER N15Z TYPE INSTRUCTION MANUAL CONTENTS 1. APPLICATION... 5 2. METER SET... 5 3. BASIC REQUIREMENTS, OPERATIONAL SAFETY... 6 4. INSTALLATION... 8 5. HANDLING... 10 6. SPECIFICATIONS...11 7.

More information

UCI274C - Technical Data Sheet

UCI274C - Technical Data Sheet - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,

More information

UCI274H - Technical Data Sheet

UCI274H - Technical Data Sheet - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,

More information

Enhanced Quality with a Touch of Style

Enhanced Quality with a Touch of Style Rudolf Current Transformer Enhanced Quality with a Touch of Style Current Transformer Enhanced Quality with a Touch of Style New Products Rudolf launched our new encapsulated current transformer. Portraying

More information

46 SERIES. Miniature industrial relays 8 to16 A

46 SERIES. Miniature industrial relays 8 to16 A Miniature industrial relays 8 to16 1 & 2 CO industrial style power relays For socket mount or direct connection via Faston connectors Type.52 -- 2 CO 8 Type.61 -- 1 CO 16 C coils & DC coils vailable with:

More information

PCB transformers. Short circuit proof PCB transformer VB. General Data. Advantages. Applications. Circuit diagram. Standards & 1 Certifications W v

PCB transformers. Short circuit proof PCB transformer VB. General Data. Advantages. Applications. Circuit diagram. Standards & 1 Certifications W v Short circuit PCB transformer General Data Rated input 230 Vac Rated output 6-2 x 24 Vac Rated power 0.35-3.2 VA Insulation class B Maximum ambient temperature 70 C Efficiency up to 58 % Degree of protection

More information

Rotary actuator for 2 and 3-way (control) ball valves Torque 5 Nm Nominal voltage AC 100... 240 V Control: Open/close or 3-point Auxiliary switch

Rotary actuator for 2 and 3-way (control) ball valves Torque 5 Nm Nominal voltage AC 100... 240 V Control: Open/close or 3-point Auxiliary switch echnical data sheet Rotary actuator LR-S Rotary actuator for and -way (control) ball valves orque 5 Nm Nominal voltage C... 4 V Control: Open/close or -point uxiliary switch echnical data Electrical data

More information

158 PHOENIX CONTACT Courtesy of Steven Engineering, Inc. - (800)

158 PHOENIX CONTACT Courtesy of Steven Engineering, Inc. - (800) 158 POENIX CONTACT For maximum system availability Power supply units Thanks to highquality products featuring leading technology, our QUINT, TRIO, MINI, UNO, and STEP POER product ranges optimally equip

More information

PHOENIX CONTACT - 05/2008. DANGER OF EXPLOSION! Remove an item only when it is not connected to power or if it is located in the non-explosive area.

PHOENIX CONTACT - 05/2008. DANGER OF EXPLOSION! Remove an item only when it is not connected to power or if it is located in the non-explosive area. Primary-switched power supply with SFB technology, 1 AC, output current 10 A INTERFACE Data Sheet 103128_en_01 PHOENIX CONTACT - 05/2008 1 Description QUINT POWER power supply units highest system availability

More information

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51 34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in

More information

PM734F - Technical Data Sheet Winding 28

PM734F - Technical Data Sheet Winding 28 - Technical Data Sheet Winding 28 SPECIFICATIONS & OPTIONS STANDARDS STAMFORD AC generators are designed to meet the performance requirements of IEC EN 60034-1. Other international standards, including

More information

DLA starters General information

DLA starters General information General information The construction of is based on ABB A Line contactors. The mounting plate, including a built-in A contactor, is designed to integrate an ABB manual motor starter type MS325. Starters

More information

38 Series - Relay interface modules A

38 Series - Relay interface modules A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays

More information

1 CO 10 A (5 mm pin pitch) 1 CO 10 A 3.5 mm pin pitch PCB or 95 Series socket mount. Copper side view. Pin length 5.3 mm for PCB or sockets

1 CO 10 A (5 mm pin pitch) 1 CO 10 A 3.5 mm pin pitch PCB or 95 Series socket mount. Copper side view. Pin length 5.3 mm for PCB or sockets 40 PCB/Plug-in relays from 8 to 16 40 Power relays 1 and 2 pole for direct PCB or socket mount Type 40.31 -- 1 CO 10 (3.5 mm pin pitch) Type 40.51 -- 1 CO 10 (5 mm pin pitch) Type 40.52 -- 2 CO 8 (5 mm

More information

ELFA E90S MINI BREAKERS

ELFA E90S MINI BREAKERS ELFA E90S MINI BREAKERS - ELFA E90S SERIES UL Approved (UL1077) 10KA INTERUPTION CAPACITY OPTIONS FIELD KITS Auxiliary Contacts Alarm Contact Shunt Trip UV Trip Current Limiting Design (Class 3) 3 Different

More information