0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

Size: px
Start display at page:

Download "0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors"

Transcription

1 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH1C & FH1SC Series Actuator color: Brown FH1SC FPC/FFC thickness: 0.±0.0mm Actuator color: Black Features 1. Low-profile 0.mm pitch FPC/FFC Connectors Miniaturization of portable equipment and personal mobile devices has created increased demand for a low profile, high density, and high reliability connectors. *The design of this connector has been made thinner and smaller, with a height of 0.mm and width of mm. *PCB footprint: Reduced approximately % (as compared with Hirose Electric's 0.mm pitch FH1 Series connectors) *Connector weight: Reduced approximately % (as compared with Hirose Electric's 0.mm pitch FH1 Series connectors). Conductive traces on the PCB can run under the connector All bottom surface of the connector is solid, without any exposure of the contact.. Proven Flip-Lock Actuator System assures easy and reliable operation Rotating actuator permits easy insertion and reliable connection with the FPC & FFC. Tactile sensation confirms complete mechanical locking of the actuator and the electrical connection.. Accepts 0.mm & 0.mm thick FPC/FFC No exposed contacts on the bottom of the connector. The connector will also terminate with 0.mm thick Flat Flexible Cable (FFC).. Board placement with automatic equipment Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 000 connectors.. Halogen-free * (FH1C,FH1SC(11 to 0pos.)) *As defined by IEC1--1 Br-00ppm maximum, Cl-00ppm maximum, 0.mm high 0.mm 1mm Can be mounted over conductive traces Enclosed construction (No exposed contacts) Metal fittings (Leadless) Metal Fittings (Leadless Type) No protrusions on the sides allows close side-by-side board placement. Actuator Temporary Hold Mechanism mm Actuator stays open during insertion of the FPC/FFC. 0. 1

2 FH1C & FH1SC Series 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Product Specifications Current rating 0. A (Note1) Rating Voltage rating 0 V AC Operating temperature range -ç to +ç (Note ) Operating humidity range Relative humidity 0% max. (No condensation) Storage temperature range -ç to +0ç (Note ) Storage humidity range Relative humidity 0% max. (No condensation) Recommended FPC, FFC FH1C Series FH1SC Series Thickness: = 0. ± 0.0mm Gold plated Thickness: = 0. ± 0.0mm Gold plated Item Specification Conditions 1. Insulation resistance 00 M ohms min. 0 V DC. Withstanding voltage No flashover or insulation breakdown V AC/1 minute. Contact resistance 0 m ohms max. *Including FPC/FFC conductor resistance 1 ma. Durability (insertion/ withdrawal) Contact resistance: 0 m ohms max. 0 cycles No electrical discontinuity of 1 µs or more.. Vibration Contact resistance: 0 m ohms max. No electrical discontinuity of 1 µs. min.. Shock Contact resistance: 0 m ohms max.. Humidity (Steady state). Resistance to Reflow: At the recommended temperature profile soldering heat No deformation of components affecting performance. Manual soldering: 0ç±ç for seconds Note 1: When passing the current through all of the contacts, use 0% of the current rating. Note : Includes temperature rise caused by current flow. Note : The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.information Note : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Contact resistance: 0 m ohms max. Insulation resistance: 0 M ohms min. Contact resistance: 0 m ohms max.. Temperature cycle Insulation resistance: 0 M ohms min. Ordering information FH 1 C - S - 0. SH (0) 1 Frequency: to Hz, single amplitude of 0.mm, cycles in each of the directions Acceleration of 1 m/s, ms duration, sine halfwave waveform, cycles in each of the axis. hours at temperature of 0ç and humidity of 0 to % Temperature: -ç / +1ç to +ç / +ç / +1ç to +ç Time : - / to / + / to (Minutes) cycles Part Material Finish Remarks Insulator LCP Color: Beige Actuator PPS/LCP Color: Brown (FH1C Series) ULV-0 Color: Black (FH1SC Series) Contacts Phosphor bronze Gold plated - Metal fittings Phosphor bronze Pure tin reflow plated - 1 Series name : FH Series No. : 1 C : FPC/FFC thickness : 0.mm SC : FPC/FFC thickness : 0.mm No. of contacts : to 0 Contact pitch : 0.mm Terminal type SH: SMT horizontal mounting type Material and plating specifications : Actuator material FH1C Contact: Gold plated Contact: Gold plating with nickel barrier FH1SC Contact: Gold plated to pos. Contact: Gold plating with nickel barrier FH1SC Contact: Gold plated 11 to 0 pos. Contact: Gold plating with nickel barrier PPS (0) (0) LCP (0) () (0) (0) Halogen Free YES NO YES

3 FH1C & FH1SC Series 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Connector Dimension [FH1C Series] A± Polarizing mark indicator B Number of contacts (0.1) 0.1 G A Number of contacts indicator G (1) (0.).±0.1 (1 ) 0.±0.1(Including contact terminal leads) (1.) (0.1) (C: FPC insertion slot dimension) 1 0.1MAX 0.1MAX 1 D±0.1 (1.) S.1±0. Notes 1 The coplanarity of each terminal lead and metal fitting is within 0.1 The contact terminal lead position indicates the dimension from the bottom surface of the insulator body. Difference between terminal contact to be max. 0.1mm. Packaged on tape and reel only. Check packaging specification. Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. After reflow, the terminal plating may change color, however this does not represent a quality issue. Part Number CL No. Number of Contacts A B C D FH1C-0S-0.SH(**) ** 1... FH1C-0S-0.SH(**) **..0. FH1C-0S-0.SH(**) **... FH1C-0S-0.SH(**) **..0. FH1C-0S-0.SH(**) **... FH1C-0S-0.SH(**) **..0. FH1C-S-0.SH(**) **... FH1C-1S-0.SH(**) ** 1... FH1C-1S-0.SH(**) ** FH1C-1S-0.SH(**) ** FH1C-1S-0.SH(**) ** FH1C-0S-0.SH(**) ** FH1C-1S-0.SH(**) ** FH1C-S-0.SH(**) ** FH1C-S-0.SH(**) ** FH1C-S-0.SH(**) ** FH1C-S-0.SH(**) ** FH1C-0S-0.SH(**) 0-0--** FH1C-0S-0.SH(**) ** 0... Note1: Embossed tape reel packaging (,000 pieces/reel). Order by number of reels. Note: **Specification. Refer to ordering information.

4 FH1C & FH1SC Series 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors [FH1SC Series] A±0.1 B G 0. Number of contacts (0.1) 0.1 G Polarizing mark indicator Number of contacts indicator (1 ) A (1).±0.1 (0.) (1.) 0.±0.1(Including contact terminal leads) (C: FPC insertion slot dimension) D±0.1 (0.1) 1 0.1MAX 0.1MAX 1 (1.) S.1±0. Notes 1 The coplanarity of each terminal lead and metal fitting is within 0.1 The contact terminal lead position indicates the dimension from the bottom surface of the insulator body. Difference between terminal contact to be max. 0.1mm. Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. The contacts are protruding. 0.0mm max. from the housing top surface. Packaged on tape and reel only. Check packaging specification. After reflow, the terminal plating may change color, however this does not represent a quality issue. Part Number FH1SC-0S-0.SH(**) FH1SC-0S-0.SH(**) FH1SC-0S-0.SH(**) FH1SC-0S-0.SH(**) FH1SC-0S-0.SH(**) FH1SC-S-0.SH(**) FH1SC-1S-0.SH(**) FH1SC-1S-0.SH(**) FH1SC-1S-0.SH(**) FH1SC-1S-0.SH(**) FH1SC-S-0.SH(**) FH1SC-1S-0.SH(**) FH1SC-1S-0.SH(**) FH1SC-0S-0.SH(**) FH1SC-1S-0.SH(**) FH1SC-S-0.SH(**) FH1SC-S-0.SH(**) FH1SC-S-0.SH(**) FH1SC-S-0.SH(**) FH1SC-S-0.SH(**) FH1SC-S-0.SH(**) FH1SC-S-0.SH(**) FH1SC-0S-0.SH(**) FH1SC-S-0.SH(**) FH1SC-0S-0.SH(**) CL No ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** 0-0--** 0-0--** ** ** ** 0-0--** 0-0--** ** Number of Contacts A B C D Note1: Embossed tape reel packaging (,000 pieces/reel). Order by number of reels. Note: **Specification. Refer to ordering information.

5 FH1C & FH1SC Series 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Recommended PCB Land and Metal Mask Dimensions [Common to FH1C & FH1SC Series] Recommended metal mask thickness: 0. mm. 0.± B Number of contacts 0.±0.0 (Land) 0.1 H 0.±0.0 (Metal mask) H (0.1).±0.0 0.±0.0 J±0.1 K±0.1 (0.0) (0.1) (0.1) (0.) (.) (0.1) () (A) Recommended FPC, FFC Dimensions [Common to FH1C & FH1SC Series] L±0.0 0.±0.0 B±0.0 0.±0.0 0.±0.0(FPC) 0.±0.0(FFC) -R0. FH1C Series FH1SC Series 0.±0.0 0.±0.0 (X).±0. (Exposed traces). min. (Stiffener). min. (Stiffener) Note 1: Stiffener dimension should be.mm min., and X dimension should be 0.mm for improved flexibility of FPC. Number of Contacts A B J K L Number of Contacts A B J K L

6 FH1C & FH1SC Series 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH1C & FH1SC Series FPC/FFC Construction (Recommended Specifications) 1. Using Single-sided FPC. Using Double-sided FPC. Using FFC (Flexible Flat Cable). Precautions FPC : Flexible Printed Circuit Material Name Material Covering layer film Cover adhesive Surface treatment Nickel under plated 1 to µm / Gold plated 0.µm Copper foil Cu 1oz Base adhesive Thermosetting adhesive Base film Reinforcement material adhesive Thermosetting adhesive Stiffener FPC : Flexible Printed Circuit Through-hole copper Copper foil Base adhesive Base film Base adhesive Copper foil Cover adhesive Covering layer film Reinforcement material adhesive Stiffener Material Name Covering layer film Cover adhesive Surface treatment FFC : Flexible Flat Cable Thickness (µm) FH1C FH1SC () () () () Polyimide FH1C : mil FH1SC: mil 1 Total 1 Material Thickness (µm) FH1C FH1SC () () () () Nickel under plated 1 to µm / Gold plated 0.µm Cu 1 1 Cu 1/oz 1 1 Thermosetting adhesive Cu 1/oz 1 1 Thermosetting adhesive Thermosetting adhesive Polyimide FH1C : 1mil FH1SC: mil 0 0 Total 1 Thickness (µm) Material Name Material FH1C FH1SC Polyester film Adhesive Polyester thermoplastic type (1) () (1) () (Nickel under plated / Gold plated), soft copper film Adhesive Polyester Adhesive Stiffener Polyester Polyester Polyester Total 0 * Practical tolerance of thickness dimension is ±0µm (i.e., 1 to µm). 1. This specification is a recommendation for the construction of the FH1C/ Series FPC and FFC (t=0.±0.0).. For details about the construction, please contact the FPC/FFC manufacturers.

7 FH1C & FH1SC Series 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Packaging Specifications [Common to FH1C & FH1SC Series] Embossed Carrier Tape Dimensions (1.) ±0.1 ±0.1 ±0.1 (0.) 0 Ø M±0. 1.±0.1 (Q) N±0.1 Unreeling direction (.) (.) Flat surface for placement with automatic equipment (1) Reel Dimensions (Ø1) (R:INSIDE) (Ø0) (Ø0) (T:OUTSIDE) End cection Mounting cection Lead cection (00 mm min.) Embossed carrier tape Blank cection Blank cection Top cover tape ( pockets min.) ( pockets min.) Number of Contacts M N Q R T Note:,000 pieces per reel. Embossed tape mm or wider will have perforated feed holes on two sides. Number of Contacts M N Q R T

8 FH1C & FH1SC Series 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Recommended Temperature Profile [For FH1C & FH1SC Series] Temperature(ç) ç (0 sec.) ç 0 sec. to sec. 00ç (0 sec.) MAX 0ç ç HRS test condition Solder method :Reflow, IR/hot air Solder composition :Paste,.%Sn/.0%Ag/0.%Cu (Senju Metal Industry, Co., Ltd. s Part Number:M0-1CM--.) Test board :Glass epoxy mm 0mm 1.mm thick Land dimensions :0.mm 0.mm Metal mask :0.mm 0.mm 0.1mm This temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult tour solder paste and equipment manufacturer for specific recommendations. 0 Start Preheating Soldering Time (Seconds)

9 FH1C & FH1SC Series 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Operation and Precations Operation 1. FPC/FFC Termination procedure. Connector installed on the board. 1) Lift up the actuator. Use thumb or index finger. Precautions 1) Do not apply excessive force or use any type of tool to operate the actuator. ) Assure that the FPC/FFC is fully inserted parallel to mounting surface, with the exposed conductive traces facing down. ) The connector will assure reliable performance when the actuator is open to 1 maximum. Do not exceed this angle, as this may cause permanent damage to the connector. FPC conductor surface (Bottom side) ) Rotate down the actuator until firmly closed. It is critical that the inserted FPC/FFC is not moved and remains fully inserted. Should the FPC/FFC be moved, open the actuator and repeat the process, starting with Step 1 above. ) Application of excessive force to the inserted FPC/FFC may cause damage to connector and may affect the reliability of electrical connection. If specific application requires continuous or repeated pull or bend of the inserted FPC/FFC, assure that the forces are NOT transmitted directly to the connector.. FPC/FFC Removal 1) Lift up the actuator. ) Carefully remove the FPC/FFC.

0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.

0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. 0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts

More information

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors 0.mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors FH26 Series Space saving(51 pos. shown) 1.0mm.2mm.8mm Metal fittings do no protrude outside of the connector body Features

More information

0.3 mm Pitch, 1.0 mm Height FPC Connector

0.3 mm Pitch, 1.0 mm Height FPC Connector 0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm Apr.1.20 Copyright 20 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low-profile 0.3 mm pitch FPC

More information

0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors

0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors 0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small

More information

0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors

0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors .3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors FH39 Series 3.45mm Depth 1.1mm Features 1. Low-profile.3mm pitch connector with top and bottom contact

More information

0.5 mm Pitch, 1.5 mm Above-the-Board, High-Speed Transmission FPC Connector

0.5 mm Pitch, 1.5 mm Above-the-Board, High-Speed Transmission FPC Connector 0.5 mm Pitch, 1.5 mm Above-the-Board, High-Speed Transmission FPC Connector FH55 Series FH55 Differential Impedance 70ps rise time(20-80%) 100+15%[ø] 100[ø] 100-15%[ø] Dimensional Diagram: 40 pins Characteristics

More information

0.6mm Pitch Board-to-Fine-Coaxial Cable Connectors

0.6mm Pitch Board-to-Fine-Coaxial Cable Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

SD Memory Card Connectors

SD Memory Card Connectors SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion

More information

0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC

0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC FH41 Series THine Electronics, Inc. Next-generation chipset (V-by-One HS*) Compatible connector Features 1. Compatibility

More information

Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height

Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height N.FL Series Mated height comparison (With U.FL-LP(V) ) Features 1. Low profile Nominal mated height is 1.4 mm (Max. 1.5 mm) 2. Small size:

More information

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

1.25mm Pitch Super Low profile Crimping Connector

1.25mm Pitch Super Low profile Crimping Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector

0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector .4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 3 contacts: 5 locations

More information

Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%

Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80% All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors NEW mm Pitch Double Rows Low Profile Board-to-Cable Connectors DF series Cable.4 Socket DF- **DS-C.8 DFF(G)- **DP-V Pin Header DF- **DS-C Socket Cable 6. PCB DFF **DP-H. Pin Header PCB Features. Contact

More information

0.5mm Pitch SMT Board to Board Connector

0.5mm Pitch SMT Board to Board Connector 0.5mm Pitch SMT Board to Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of

More information

Interface RF Connector with Switch

Interface RF Connector with Switch NEW Interface RF onnector with Switch Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight

More information

Interface Connectors for CDMA Type Cellular Phones

Interface Connectors for CDMA Type Cellular Phones Interface Connectors for CDM Type Cellular Phones MQ/SF178 Series Two interface configurations 1X Key 1X EV-DO Key Signal contacts Coaxial connector Features 1. Complies with the requirements of NC-R1-18

More information

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

Micro-USB connectors meeting requirements of USB 2.0 Standard

Micro-USB connectors meeting requirements of USB 2.0 Standard NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high

More information

Subminiature, LAN Modular Jack Connectors

Subminiature, LAN Modular Jack Connectors Subminiature, LAN Modular Jack Connectors TMR-5M Series Features.Fast Ethernet Support Conforms to the TIA/EIA-568-A data wiring standard and meets requirements of CAT5 transmission performance for,-3,6

More information

Micro-USB connectors meeting requirements of USB 2.0 Standard

Micro-USB connectors meeting requirements of USB 2.0 Standard All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Modular Plug Connectors Compliant to Enhanced Category 5 Standards

Modular Plug Connectors Compliant to Enhanced Category 5 Standards Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B

More information

Modular Plug Connectors compliant to Cat.6 A Standard

Modular Plug Connectors compliant to Cat.6 A Standard Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of

More information

ZIF Connector & Flat Flexible Cable

ZIF Connector & Flat Flexible Cable ZIF Connector & Flat Flexible Cable 09/08-1 ZIF Connector & Flat Flexible Cable As the demand for higher density in electronic equipment increases, the use of Flexible Flat Cable (FFC) or Flexible Printed

More information

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Series New FEATURES 1. 1.7 mm wide slim two-piece type connector Mated height 0.6 mm Smaller compared to A4F series Width: Approx. 44% down

More information

Coaxial Line Stretchers

Coaxial Line Stretchers All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

HMCC SERIES. With SMT PCB Mating Jacks. Electronics LLC. Features: Applications: Low Profile Mated Height: (2.4mm) High Frequency Performance to 6 GHz

HMCC SERIES. With SMT PCB Mating Jacks. Electronics LLC. Features: Applications: Low Profile Mated Height: (2.4mm) High Frequency Performance to 6 GHz HMCC SERIES Features: Low Profile Mated Height: (2.4mm) Ultra small PCB profile and surface area High Frequency Performance to 6 GHz Highly Shielded, Ultra-fine Coaxial Cable Three different sizes available

More information

Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts

Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according

More information

SOCKETS FOR SD MEMORY CARD (R TYPE)

SOCKETS FOR SD MEMORY CARD (R TYPE) Enhanced robustness and EMI resistance achieved by the laser-welded double-sided metal shell (SDHC card compatible, with card jump-out and wrong insertion prevention functions) AXA2R SOCKETS FOR SD MEMORY

More information

1 mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors

1 mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

08. SEK IDC CONNECTORS

08. SEK IDC CONNECTORS . IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these

More information

RJ45 Modular Jack Connectors with Pulse Transformers

RJ45 Modular Jack Connectors with Pulse Transformers All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

White Paper. Recommendations for Installing Flash LEDs on Flex Circuits. By Shereen Lim. Abstract. What is a Flex Circuit?

White Paper. Recommendations for Installing Flash LEDs on Flex Circuits. By Shereen Lim. Abstract. What is a Flex Circuit? Recommendations for Installing Flash LEDs on Circuits By Shereen Lim White Paper Abstract For the mobile market some PCB assemblies have been converted to flex circuit assemblies, in part because flex

More information

SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant

SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications

More information

SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )

SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 ) SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7

More information

USB3.0 Micro-B Connector

USB3.0 Micro-B Connector USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As

More information

ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant

ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing

More information

Amphenol Taiwan Branch

Amphenol Taiwan Branch for Board to Board and wire to Board use. Other cable lengths and customer design available. RoHS compliance. USB 3.0 Type A, Right Angle, Plug, SMT, Standard Type Co-planarity: 0.08mm max. Voltage: 30.0

More information

Flexible Circuit Simple Design Guide

Flexible Circuit Simple Design Guide Flexible Circuit Simple Design Guide INDEX Flexible Circuit Board Types and Definitions Design Guides and Rules Process Flow Raw Material Single Side Flexible PCB Single Side Flexible PCB (Cover layer

More information

0.5mm Pitch, Vertical Connection Board-to-Micro Coaxial Cable Connectors

0.5mm Pitch, Vertical Connection Board-to-Micro Coaxial Cable Connectors .5mm Pitch, Vertical Connection Board-to-Micro Coaxial Cable Connectors DF8 Series Excellent mating workability ±1mm ±1mm Z Y X Figure 1 Features 1. High speed signal connector With its excellent signal

More information

AC and Pulse Film Foil Capacitors KP Radial Potted Type

AC and Pulse Film Foil Capacitors KP Radial Potted Type AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions

More information

I-PEX MHF4 Micro Coaxial Connector

I-PEX MHF4 Micro Coaxial Connector PRODUCT SPECIFICATION I-PEX MHF4 Micro Coaxial Connector Plug P/N 20448-001R-81 Receptacle P/N 20449-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376

More information

STANDARD MICRO-D CONNECTORS

STANDARD MICRO-D CONNECTORS STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector

More information

SIMPLE WIRE-PRESS CONNECTORS (AXF1, 2)

SIMPLE WIRE-PRESS CONNECTORS (AXF1, 2) SIMPLE WIRE-PRESS CONNECTORS SIMPLE WIRE-PRESS CONNECTORS (Compliant with e-con) New Wire connection plug 2. The structure is designed to temporarily hold inserted wires before crimping, allowing for high

More information

Connection Systems. High Density Printed Circuit (HDPC) Connectors

Connection Systems. High Density Printed Circuit (HDPC) Connectors Connection Systems High Density Printed Circuit (HDPC) Connectors Connection Systems High Density HDPC Connectors Get connected with our expanding family of high quality connectors Delphi Connection Systems

More information

WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors

WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011

More information

MAXIMUM SOLUTIONS. Mill-Max Offers New SuperSpeed USB 3.0 Connectors

MAXIMUM SOLUTIONS. Mill-Max Offers New SuperSpeed USB 3.0 Connectors MAXIMUM SOLUTIONS Mill-Max Offers New SuperSpeed USB 3.0 Connectors Mill-Max has expanded its USB family to include four new USB 3.0 connectors. USB 3.0, SuperSpeed USB, provides a 10 X faster data transfer

More information

SSL - Cable Plug. Series 9159 APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER XXX

SSL - Cable Plug. Series 9159 APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER XXX The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring

More information

edac Magnetic and Modular RJ45 Jacks Connect with Us... Experience Makes the Difference EJ/1115/V2

edac Magnetic and Modular RJ45 Jacks Connect with Us... Experience Makes the Difference EJ/1115/V2 edac EJ/1115/V2 Magnetic and Modular RJ45 Jacks Connect with Us... Experience Makes the Difference edac Our Capabilities We have been designing and manufacturing interconnect products for over 50 years.

More information

Metallized polyester film capacitors MKT 370/371/372/373

Metallized polyester film capacitors MKT 370/371/372/373 Metallized polyester film capacitors MKT 370/37/372/373 MKT RADIAL POTTED CAPACITORS PITCH /7.///22./27. mm 2222 370 2222 37 2222 372 2222 373 CBA Fig. Simplified outlines. FEATURES Low-inductive wound

More information

Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of

Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes

More information

XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement

XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can

More information

PTS645 Series 6 mm Tact Switches

PTS645 Series 6 mm Tact Switches PTS5 Series mm Tact Switches Features/enefits Compact size x mm Variety of actuator lengths Choice of actuation force RoHS compliant and compatible Typical Applications Consumer products Instrumentation

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

Product Specification

Product Specification Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should

More information

WELCOME TO VIASION. www.viasion.com

WELCOME TO VIASION. www.viasion.com WELCOME TO VIASION www.viasion.com BRIEF INTRODUCTION Viasion Technology Co., Ltd is a professional Printed Circuit Board (PCB) manufacturer in China. With around 1500 employees totally in 2 different

More information

Product shall be of the design, construction and physical dimensions specified on the applicable product drawing.

Product shall be of the design, construction and physical dimensions specified on the applicable product drawing. Product Specification 108-1403 07Nov08 Rev A All Paragraphs Revised AMPOWER* Wave Crimp System Self-Aligning Header and Receptacle Assemblies 1. SCOPE 1.1. Content This specification covers performance,

More information

68 Position PC Card Receptacles

68 Position PC Card Receptacles 68 Position PC Card Receptacles Methode s 68 position receptacles are PCMCIA and JEIDA compatible and are available in straddle mount and single sided surface mount configurations. The independent dual

More information

Lead (Pb)-free Commodity Thick Film Chip Resistors

Lead (Pb)-free Commodity Thick Film Chip Resistors Lead (Pb)-free Commodity Thick Film Chip Resistors FEATURES High volume product suitable for commercial applications Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free

More information

DATA SHEET. SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R. Product Specification February 27, 2013 V.

DATA SHEET. SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R. Product Specification February 27, 2013 V. Product Specification February 27, 13 V.9 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free

More information

APPROVAL SHEET MANUFACTURE SIGNATURE CUSTOMER SIGNATURE DATE: 09/03/09 DATE: 09/03/09 DATE: 09/03/09 DATE:

APPROVAL SHEET MANUFACTURE SIGNATURE CUSTOMER SIGNATURE DATE: 09/03/09 DATE: 09/03/09 DATE: 09/03/09 DATE: APPROVAL SHEET CUSTOMER: PART NAME: Mini PCI Express Connector PART NO.: CUSTOMER P/N: MANUFACTURE SIGNATURE SALES REP. R&D DEPT. QA DEPT. CUSTOMER SIGNATURE Jeff 万军 Sally liu DATE: 09/0/09 DATE: 09/0/09

More information

AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR

AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )

More information

Flexible Solutions. Hubert Haidinger Director PE/CAM BU Industrial & Automotive 5.June 2013. www.ats.net

Flexible Solutions. Hubert Haidinger Director PE/CAM BU Industrial & Automotive 5.June 2013. www.ats.net Flexible Solutions Hubert Haidinger Director PE/CAM BU Industrial & Automotive 5.June 2013 www.ats.net Austria Technologie & Systemtechnik Aktiengesellschaft Fabriksgasse13 A-8700 Leoben Tel +43 (0) 3842

More information

Thick Film High Power Chip Resistors. Size W, W, /2W

Thick Film High Power Chip Resistors. Size W, W, /2W WF25P, WF20P, WF12P ±1%, ±5% 1Ω ~ 1MΩ Thick Film High Power Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF25-20-12P_V10

More information

Choosing the right Passives Device FIXED RESISTORS SENSING SMD / LEADED METAL FILM METAL FILM METAL FILM NTC / PTC HUMIDITY

Choosing the right Passives Device FIXED RESISTORS SENSING SMD / LEADED METAL FILM METAL FILM METAL FILM NTC / PTC HUMIDITY Sensing Resistors Selection Guide Choosing the right Passives Device FIXED RESISTORS SENSING SMD / LEADED SMD LEADED ELEMENT ELEMENT METAL FILM METAL FILM METAL FILM NTC / PTC MOISTURE / HUMIDITY NTC PTC

More information

Quality assurance of flex circuits in the SCT barrel hybrid production

Quality assurance of flex circuits in the SCT barrel hybrid production Quality assurance of flex circuits in the SCT barrel hybrid production ATLAS Project Document No. Institute Document No. Created: dd/mm/yy Modified: dd/mm/yy Page: 1 of 11 DRAFT Quality assurance of flex

More information

Universal MATE-N-LOK Connectors

Universal MATE-N-LOK Connectors Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00

More information

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors .4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,

More information

Mini USB Header USCAR 30

Mini USB Header USCAR 30 Product Specification 108-94402 03 SEP 13 Rev A Mini USB Header 180 - USCAR 30 1. SCOPE This specification covers the performance, tests and quality requirements on a Mini-USB 180 Vertical PCB header,

More information

CAPABILITIES Specifications Vary By Manufacturing Locations

CAPABILITIES Specifications Vary By Manufacturing Locations Revised June 2011 Toll Free: 1-800-979-4PCB (4722) www.4pcb.com sales@4pcb.com Material FR4 RoHS RF Materials CAPABILITIES Specifications Vary By Manufacturing Locations Number of Conductive Layers Standard

More information

3. ELECTRICAL PERFORMANCE PROPERTY TEST CONDITION PERFORMANCE 3. 1 Contact Resistance 1) Center Push 100mΩ Max

3. ELECTRICAL PERFORMANCE PROPERTY TEST CONDITION PERFORMANCE 3. 1 Contact Resistance 1) Center Push 100mΩ Max 1. GENERAL 1. 1 Application : This specification is applied to MULTI WAY SWITCH for electronic equipment. 1. 2 Operating Temperature Range :-25 ~ 70 1. 3 Storage Temperature Range :-0 ~ 85. However, 96

More information

General Specifications

General Specifications Series ND mm Process Sealed SMT DIP Rotaries eneral Specifications Electrical apacity (Resistive Load) Switching Rating: ma @ 5V D Nonswitching Rating: ma @ 5V D Other Ratings ontact Resistance: Insulation

More information

TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603

TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603 WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without

More information

CCM05 SD, MMC & minisd

CCM05 SD, MMC & minisd For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.

More information

KSC Series Sealed Tact Switch for SMT

KSC Series Sealed Tact Switch for SMT KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator

More information

AC SERIES DUAL 1/4 (6.35mm) / XLR

AC SERIES DUAL 1/4 (6.35mm) / XLR AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack

More information

The SMT/QuickGrip VSWR

The SMT/QuickGrip VSWR Connectors Product Facts Solderless Cable Termination [.118] Mated Height Excellent Cable Retention Usable With Flexible and Semi-Rigid Micro-Coaxial Cables Tape and Reel Packaging system. The design provides

More information

Product Technical Bulletin #67 SMT Soldering Guidelines

Product Technical Bulletin #67 SMT Soldering Guidelines Product Technical Bulletin #67 SMT Soldering Guidelines Purpose: The purpose of this technical bulletin is to provide information regarding the proper procedure for processing AirBorn s microsi surface

More information

Mini PCI Express & msata Connector

Mini PCI Express & msata Connector Mini PCI Express & msata Connector Qualification Test Report 501-99107 1 Jun 2016 Rev C 1. INTRODUCTION 1.1. Purpose Testing was performed on the 0.80mm pitch Mini PCI Express & msata Connector to determine

More information

DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free

DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/005/1206/2512 RoHS compliant & Halogen free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE

More information

Vectron International Filter specification TFS 1220N 1/5

Vectron International Filter specification TFS 1220N 1/5 Vectron International Filter specification TFS 1220N 1/5 Measurement condition Ambient temperature: 22 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Coaxial Line Stretchers

Coaxial Line Stretchers Coaxial Line Stretchers These coaxial line stretchers maintain an impedance of 50ø while changing the length of the coaxial tube and adjusting the phase. One type is locked after the adjustment and another

More information

N type Coaxial Connectors

N type Coaxial Connectors N type Coaxial Connectors N Series Features 1. 50 ohms wide varieties standard connectors 2. Screw on locking 3. High durability 4. Applicable standard: MI-C-39012/MI STD 348-304 Products guide s Straight

More information

Figure 1 (end) Application Specification 114 13088 provides application requirements for MICTOR Right Angle Connectors for SMT PC Board Applications

Figure 1 (end) Application Specification 114 13088 provides application requirements for MICTOR Right Angle Connectors for SMT PC Board Applications This specification covers requirements for application of MICTOR Vertical Board to Board Plugs and Receptacles designed for pc boards. The connectors have an in row contact spacing on 0.64 [.025] centerlines.

More information

Flex Circuit Design and Manufacture.

Flex Circuit Design and Manufacture. Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit

More information

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions

More information

High Density Low Profile Connectors

High Density Low Profile Connectors High Density Low Profile Connectors High density contact arrangement Light weight Low profile mated height Surface mount termination technology Miniature hyperboloid socket contacts Interfacial seal Polarized

More information

General Specifications

General Specifications General Specifications Electrical Capacity (Resistive Load) ower Level (silver): 0.A @ 0V DC Logic Level (gold): 0.VA maximum @ 8V AC/DC maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional

More information

Wireless Applications. Host Interfaces. te.com/products/ngff. TE Connectivity. M.2 (NGFF) Connector. Ultrabook/ Notebook. Smart TV. Server.

Wireless Applications. Host Interfaces. te.com/products/ngff. TE Connectivity. M.2 (NGFF) Connector. Ultrabook/ Notebook. Smart TV. Server. M2 NGFF Applications ULTRABOOK TABLET SSD SMART TV The list goes on and on... Miniature in size. Big in possibilities. 0.5MM PITCH WITH 67 POSITIONS & AVAILABLE IN VARIOUS HEIGHTS SAVES MORE THAN 20% PCB

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60

More information

4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES

4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES 4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS FEATURES 28. 1.12 12..472 1.4.49 The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High

More information

ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.

ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0. ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)

More information

DC Film Capacitors MKT Axial Type

DC Film Capacitors MKT Axial Type MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS

More information

Standard Thick Film Chip Resistors

Standard Thick Film Chip Resistors Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free

More information

Bending, Forming and Flexing Printed Circuits

Bending, Forming and Flexing Printed Circuits Bending, Forming and Flexing Printed Circuits John Coonrod Rogers Corporation Introduction: In the printed circuit board industry there are generally two main types of circuit boards; there are rigid printed

More information

3. Terminal Shape P : PCB terminals FS: Surface-mounting terminals, short FL : Surface-mounting terminals, long

3. Terminal Shape P : PCB terminals FS: Surface-mounting terminals, short FL : Surface-mounting terminals, long Surfacemounting Relay Ultracompact and Slim DPDT Relay Suitable for highdensity mounting.(.7 mm (W). mm (L) 9 mm (H)). Dielectric strength of, VAC and an impulse withstand voltage of 2, V for 2 μs (conforms

More information

TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS

TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS LOW-PROFILE SURFACE-MOUNT RELAY RELAYS.55 5.6. FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6.5 mm.56 inch) Tape and reel package is available as standard packing style Surge withstand between

More information

01005 Assembly Process, Materials and Tooling. Denis Barbini, Ph.D. Universal Instruments Corporation Advanced Process Lab

01005 Assembly Process, Materials and Tooling. Denis Barbini, Ph.D. Universal Instruments Corporation Advanced Process Lab 01005 Assembly Process, Materials and Tooling Denis Barbini, Ph.D. Universal Instruments Corporation Advanced Process Lab Introduction Introduction to the 01005 History and market information Availability

More information