QuickSpecs. Models HP X132 10G SFP+ LC ER Transceiver. HP SFP+ Transceivers (SR, LRM and LR) Overview

Transcription

1 Overview Models HP X132 10G SR Transceiver HP X132 10G LR Transceiver HP X132 10G LRM Transceiver HP X132 10G ER Transceiver J9150A J9151A J9152A J9153A DA Worldwide Version 2 November 16, 2010 Page 1

2 HP X132 10G SR Transceiver (J9150A) in form-factor that supports the 10-Gigabit SR standard, providing m on multimode fiber GbE port (IEEE 802.3ae Type 10Gbase-SR); Duplex: full only Operating 850 nm 0.04 lb. (0.02 kg) 0.6 W 0.8 W 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC Type A1b or A1a, respectively; 2-26m with 62.5 µm multimode 160 MHz*km 2-33m with 62.5 µm multimode 200 MHz*km 2-66m with 50 µm multimode 400 MHz*km 2-82m with 50 µm multimode 500 MHz*km 2-300m with 50 µm multimode 2000 MHz*km Cable length 2-300m Multi Mode DA Worldwide Version 2 November 16, 2010 Page 2

3 HP X132 10G LR Transceiver (J9151A) in form-factor that supports the 10-Gigabit LR standard, providing km on single-mode fiber GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full only Operating 1310 nm 0.04 lb. (.02 kg) 0.9 W 1 W Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC Type B1; 2m-10km with 9/125 µm single-mode cable Cable length 2m to 10km Single Mode Conditioning patch cord cables are not supported. DA Worldwide Version 2 November 16, 2010 Page 3

4 HP X132 10G LRM Transceiver (J9152A) in form-factor that supports the 10-Gigabit LRM standard, for m on legacy multimode fiber GbE port (IEEE 802.3aq Type 10Gbase-LRM); Duplex: full only Operating 1310 nm 0.04 lb. (.02 kg) 0.7 W 1 W 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations); m with 62.5 µm multimode 160/500 MHz*km m with 62.5 µm multimode 200/500 MHz*km m with 50 µm multimode 400/400 MHz*km m with 50 µm multimode 500/500 MHz*km m with 50 µm multimode 1500/500 MHz*km Cable length 0.5m to 220m Multi Mode For OM3 cable (50 µm 1500/500 MHz*km), a modeconditioning patch cord is not required. Other multimode cables may require mode-conditioning patch cords to achieve the distances listed above. DA Worldwide Version 2 November 16, 2010 Page 4

5 HP X132 10G ER Transceiver (J9153A) The ER Transceiver will transmit 10Gbps over up to 40km using standard OM3 fiber cable. This product expands the HP Networking transceiver portfolio for connections from 0m to 40km. Use only genuine HP transceivers with your HP Networking equipment to ensure reliability and support GbE port (IEEE 802.3ae Type 10Gbase-ER); Duplex: full only Operating relative 1550 nm 2.22(d) x 0.55(w) x 0.47(h) in. (5.65 x 1.39 x.04 lb., Fully loaded 5% to 95%, noncondensing 5% to 95%, noncondensing 1.3 W 1.5 W Single-mode fiber optic, complying with ITU-T G.652; 40km Single Mode Check switch release notes for minimum version of software required to support this transceiver. Some switches have limits as to how many of this particular transceiver can be installed. See the release notes of the switch software/firmware being used for more details. To learn more, visit: Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. DA Worldwide Version 2 November 16, 2010 Page 5