Virtual Access GW6500 Series Quick Start Guide
|
|
- Clemence Kelly
- 7 years ago
- Views:
Transcription
1 Virtual Access GW6500 Series Quick Start Guide
2 Table of contents 1 Preface Safety instructions Electrical safety Wireless safety Product disposal Getting started Location variants Serial number Installing a GW6500 Series router Installing a GW6510 router on an ADSL connection Installing a GW6525 router on an ADSL and dial modem connection Inserting the SIM card Connecting the antenna Connecting the power supply Configuring a 6500 Series router Optional automatic configuration (Zero Touch) Manually configuring a 6500 Series router Configuring ADSL username and password PPP Configuring ADSL VPI/VCI and encapsulation mode Configuring the APN and PIN Configuring authentication options for 3G Save the configuration Reload the configuration Connection Monitor Firmware updates information Advanced configuration Troubleshooting Copyright 2011 Virtual Access (Irl) Ltd. This material is protected by copyright. No part of this material may be reproduced, distributed, or altered without the written consent of Virtual Access. All rights reserved. Third party trademarks are the property of the third parties. Issue: 1.0 Page 2 of 16
3 1: Preface 1 Preface 1.1 Safety instructions The router is complicated electronic equipment that may be repaired only by authorised and qualified personnel. Do not try to open or repair the router yourself. Do not place the router in a damp or humid place. Do not stack the router. The router should be used in a sheltered area, within a temperature range of 0oC to 40oC. Do not expose the router to direct sunlight. HIGH VOLTAGES Under no circumstances is the router to be operated with the cover removed. DANGEROUS SUBSTANCES Semiconductor devices contain dangerous substances, such as beryllium and arsenic. Electronic devices must not be opened. If they become damaged, they must only be handled using protective gloves. If the substances inside the electronic devices come into contact with broken skin or wounds, hospital care must be sought immediately. Electronic components must be disposed of as hazardous toxic waste and must not be incinerated. 1.2 Electrical safety The 6500 Series router is a class I/II apparatus. We recommend that an AC surge arrestor is installed in the AC outlet to which this equipment is connected. Plug in the power supply into a socket outlet that is installed near the equipment and is easily accessible. 1.3 Wireless safety Wireless routers incorporate a wireless radio module. Ensure the antenna is positioned at least one metre away from you and other people in normal operation. If in a hospital or health care facility, do not use the router in areas where guidelines to switch off mobiles phones are posted. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interference from wireless routers when placed close to the device. People with pacemakers are advised to keep the wireless router away from the pacemaker while it is on. Do not operate your wireless router in the presence of flammable gases, fumes or potentially explosive atmospheres. Wireless routers should not be used anywhere that blasting operations are taking place. Issue: 1.0 Page 3 of 16
4 1: Preface Wireless routers operate using radio signals and cellular networks cannot be guaranteed to connect in all possible conditions. Therefore, you should not rely solely on any wireless device for life-critical communications. 1.4 Product disposal The United Kingdom and Republic of Ireland are under an obligation to minimise the disposal of Waste Electrical and Electronic Equipment (WEEE) in domestic waste and encourage recycling, recovery and environmentally sound disposal. Virtual Access is committed to promoting the reuse, recycling and recovery of WEEE by contributing to the appropriate compliance schemes. Our product packaging is marked with the crossed out wheeled bin symbol to indicate that the product must not be disposed of in domestic waste but disposed of through an approved WEEE take back scheme. For details of your local collection facilities, please contact your local authority. Virtual Access WEEE registration number: WEE/CA2530XZ. Issue: 1.0 Page 4 of 16
5 2: Getting started 2 Getting started This Quick Start configuration guide enables you to configure the GW6500 series ADSL/3G router for initial Internet access over the ADSL connection, providing automatic failover to a 3G data network. 2.1 Location variants There are cable variations for the 6500 Series router depending on whether the router has been supplied for use in the UK or outside the UK. Refer to the Pack Contents table in the Quick Start pack to check you have the correct cables for your router model. 2.2 Serial number When you receive your GW6500 Series router retain the outer packaging. The label containing the model number, serial number (S/N) and part number (P/N) is located on the side of the packaging box. Each 6500 Series router is assigned a unique serial number. Record your device serial number on your warranty card or somewhere you can easily access it. You must reference your unique serial number (S/N) when you contact your supplier or Virtual Access support should you require service or support on the device. Figure 1: The GW6525 model label on the side of the packaging Issue: 1.0 Page 5 of 16
6 3: Installing a GW6500 Series router 3 Installing a GW6500 Series router 3.1 Installing a GW6510 router on an ADSL connection Figure 2: The cables required for installing a GW6510 router on an ADSL connection 1. Connect one end of the yellow RJ45 Ethernet cable to the Ethernet port marked A. Connect the other end into the LAN port of your PC or to a LAN hub or switch. 2. To connect directly to an ADSL service, connect one end of the RJ11 connector on the purple cable to the port marked ADSL. Connect the other end of the RJ11 connector to the ADSL socket on the wall or the splitter. This socket can be an RJ45 or an RJ11 port. The RJ11 will fit into both. 3. Go to section 3.3, Inserting the SIM card. 3.2 Installing a GW6525 router on an ADSL and dial modem connection Figure 3: The cables required for installing a GW6525 router on an ADSL and a V.90 connection 1. Connect one end of the yellow RJ45 Ethernet cable to the Ethernet port marked A. Connect the other end into the LAN port of your PC or to a LAN hub or switch. 2. To connect directly to an ADSL service, connect one end of the RJ11 connector on the purple cable to the port marked ADSL. Connect the other end of the RJ11 connector to the ADSL socket on the wall or the splitter. This socket can be an RJ45 or an RJ11 port. The RJ11 will fit into both. 3. To connect the dial modem, connect the RJ11 end of the black cable to the port marked DIAL MODEM. Connect the other end to a PSTN telephone socket or the splitter. 4. Go to section 3.3, Inserting the SIM card. Issue: 1.0 Page 6 of 16
7 3: Installing a GW6500 Series router 3.3 Inserting the SIM card 1. Ensure the unit is powered off. Figure 4: The SIM slot on the GW6500 series router 2. Hold the SIM card with the chip side up and the cut corner top right. 3. Gently push the SIM card into SIM slot 1 until it clicks in. 4. To remove the SIM card, gently push the SIM card. The card will click out. WARNING The SIM card MUST be inserted into the router before the unit is powered on. Do not insert or remove the SIM card after the unit has been powered on. 3.4 Connecting the antenna The 6500 Series router comes with an antenna suitable for normal 3G operation in most environments. 1. Screw the antenna into the back SMA connector. 3.5 Connecting the power supply 1. Connect the power supply connector to the power port on the back of the GW6500 Series router 2. Plug the power cable into an electrical socket suitable for a DC5V/2.0A power supply. 3. The router initialises. The POWER LED lights up green, the CONFIG LED flashes, and all the other LEDs temporarily light in sequence. Issue: 1.0 Page 7 of 16
8 4: Configuring a 6500 Series router 4 Configuring a 6500 Series router Depending on the factory configuration installed on the GW6500 Series router, the device either automatically self-configures (Zero Touch) or it requires manual configuration. 4.1 Optional automatic configuration (Zero Touch) Virtual Access GW6500 Series routers can be automatically configured from a service provider s central management service using the Zero Touch configuration process. Zero Touch is a process in which the GW6500 Series router contacts a central server and automatically pulls down its run time configuration. To verify this setting, browse to the router s Start page. You can access the router s Start page by plugging an Ethernet cable into port A on the Ethernet switch. The 6500 Series router is configured as a DHCP server. The default IP of the router is /24. From the Start page, click Advanced -> Expert View to check that your router has been configured for automatic (Zero Touch) configuration. For Zero Touch configuration process the Factconf Name: field should show GXXXXX_Zero; the Factconf Type: field should show activation. Figure 5: The GW6510 system information for zero touch configuration Contact your service provider to avail of this service. 4.2 Manually configuring a 6500 Series router To manually configure your GW6500 Series router with ADSL and 3G backup, check that the router has been pre-loaded with a manual factory configuration. The manual factory configuration for this model comprises settings for basic Internet connectivity of the ADSL and automatic failover/failback to 3G data services. To verify this setting, browse to the router s Start page. You can access the router s Start page by plugging an Ethernet cable into port A on the Ethernet switch. Issue: 1.0 Page 8 of 16
9 4: Configuring a 6500 Series router Figure 6: The start page The 6500 Series router is configured as a DHCP server. The default IP of the router is /24. When the Start page has opened, click Advanced -> Expert View to check that the router has been supplied for manual configuration. The Factconf Name: field should show GXXXXX_man; the Factconf Type: field should show manual. Figure 7: The GW6510 system information for manual configuration When you confirm that the router has a manual factory configuration installed, you can proceed to configure the following parameters: ADSL Username and password VPI/VCI and ADSL encapsulation mode APN SIM PIN (if using 3G) PPP Username and password Issue: 1.0 Page 9 of 16
10 4: Configuring a 6500 Series router 4.3 Configuring ADSL username and password PPP-1 To set the ADSL username and password, from the start page, click Advanced. In the Advanced menu click Expert View -> interfaces -> ppp-1 -> ppp -> authentication -> name and password. The Username and Password page appears. Figure 8: The Username and password page 1. Type in the username and password details. 2. Click Update and save to flash. Note which configuration you have committed the changes to. 4.4 Configuring ADSL VPI/VCI and encapsulation mode To set the ADSL VPI/VCI, from the Start page click Advanced -> Expert View -> interfaces -> aal5-1 -> aal5 configuration. The AAL5 Configuration page appears. Issue: 1.0 Page 10 of 16
11 4: Configuring a 6500 Series router Figure 9: The AAL5 configuration page 1. Type in the VPI/VCI details and select the correct encapsulation mode. 2. Note: if you are configuring PPPoE services over ADSL, use Bridged (RFC 1483) encapsulation. You will also need to enable pppoe under Expert View -> interfaces -> ppp-1 -> pppoe -> pppoe configuration 3. Click Update and save to flash. Note which configuration you have committed the changes to. 4.5 Configuring the APN and PIN To set the APN and PIN, from the start page click Advanced. In the Advanced menu, click Expert View -> interfaces -> modem-1 -> gsm. The Modem Interface on GSM page appears. Note: for GW6510 units, the interface says modem-0. For GW6525 units, the interface says modem-1. Issue: 1.0 Page 11 of 16
12 4: Configuring a 6500 Series router 1. Type in the APN and PIN details. Figure 10: The modem interface on GSM 2. Click Update and save to flash. Note which configuration you have committed the changes to. 4.6 Configuring authentication options for 3G You can restrict access to each PPP interface based on a username and password. In the Expert View menu, click interfaces -> ppp-2 (3G) -> ppp- 2 >authentication- > name and password. The Username and Password page appears. Figure 11: The username and password page 1. Enter in the relevant details, click Update and save to flash. Note: Password validation does not require a minimum length or the use of numeric characters. 4.7 Save the configuration 1. In the Configuration Update Result page, click Save to flash. The Save Configuration to Flash page appears. Issue: 1.0 Page 12 of 16
13 4: Configuring a 6500 Series router 2. In the drop-down menu select the configuration you want to save changes to and click Save. There are 3 options to save to: Config 1 Config 2 Alternate Config 3. Select config Reload the configuration In the Expert View menu, select set boot configuration. 1. In the drop-down menu, select the configuration option you have chosen to save to. 2. Click Select, then select reload from sidebar. 4.9 Connection Monitor To check the status of each of the connections, in the Advanced menu, click Connection Monitor. The Connection Monitor page appears. Figure 12: The Connection Monitor interface Issue: 1.0 Page 13 of 16
14 5: Firmware updates information 5 Firmware updates information To obtain firmware updates for your 6500 Series router, contact your reseller. Issue: 1.0 Page 14 of 16
15 6: Advanced configuration 6 Advanced configuration For more detailed 6500 Series router configurations refer to the how-to guides on the Virtual Access website. Issue: 1.0 Page 15 of 16
16 7: Troubleshooting 7 Troubleshooting Problem Possible causes Solution I cannot access the GW6500 I cannot access the 3G WAN network after manual configuration The router performance is slow. The configured IP address or subnet, or both on your PC is incorrect. The GW6500 is not running its factory configuration. The SIM is not inserted. The APN is incorrect. SIM username or password, or both are incorrect. There is a connection failure. There is poor 3G signal strength. Change the IP on your PC to contact the GW6500 on /24 Check the config LED status. Flashing indicates its running its factory configuration. If it is solid, hold in the reset button for between 3 and 15 seconds and then release. Power off the GW6500, insert the SIM card and then power on the GW6500. Check the correct APN has been configured. Check the correct SIM username and password settings. Check the status of Connection Monitor by browsing to Expert View >Advanced > Connection monitor. Check the signal strength by browsing to Expert View >Status > 3G Info. Move the GW2000 to a better location and recheck signal strength ADSL not connected No Internet/network access over ADSL Line not provisioned Local wiring incorrect ADSL WAN Sync is solid but username and password entered incorrectly Contact ISP Check that the router s ADSL port is correctly connected to the ADSL wall socket/filter Check section 4.1 Issue: 1.0 Page 16 of 16
Quick Installation Guide DSL-2750U/NRU. 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch
DSL-2750U/NRU 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch BEFORE YOU BEGIN Delivery Package Router DSL-2750U/NRU Power adapter RJ-11 telephone cable Straight-through Ethernet cable (CAT 5E)
More informationQuick Installation Guide DSL-2750U. 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch
DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch BEFORE YOU BEGIN Delivery Package Router DSL-2750U Power adapter DC 12V/1A RJ-11 telephone cable Ethernet cable (CAT 5E) Splitter (brochure).
More informationQuick Reference Guide
Welcome to BT Business Total Broadband Quick Reference Guide Follow the steps in this Quick Reference Guide to set up and start using your new BT Business Total Broadband service. The CD will help you
More informationChapter 1 Connecting the Router to the Internet
Chapter 1 Connecting the Router to the Internet This chapter describes how to set up the router on your Local Area Network (LAN) and connect to the Internet. It describes how to set up your wireless ADSL
More informationRouteFinder SOHO. Quick Start Guide. SOHO Security Appliance. EDGE Models RF825-E, RF825-E-AP CDMA Models RF825-C-Nx, RF825-C-Nx-AP
RouteFinder SOHO SOHO Security Appliance EDGE Models RF825-E, RF825-E-AP CDMA Models RF825-C-Nx, RF825-C-Nx-AP Quick Start Guide RouteFinder RF825 Series Quick Start Guide RouteFinder SOHO Security Appliance
More informationUK Quick Install Guide
BiPAC 7800 and 7800N ADSL2/2+ Modem/Routers QoS Firewall Wired/Wireless Multi-GigaPort Switching Hub UK Quick Install Guide i This guide covers only the initial Internet set-up. Please refer to the full
More informationBiPAC 7800NL. Wireless-N ADSL2+ Firewall Router. Quick Start Guide
BiPAC 7800NL Wireless-N ADSL2+ Firewall Router Quick Start Guide BiPAC 7800NL Wireless-N ADSL2+ Firewall Router Billion BiPAC 7800NL Wireless-N ADSL2+ Firewall Router PLEASE READ THE QUICK START GUIDE
More informationRouter Setup Manual. NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10060-01 2006-03-17
NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10060-01 2006-03-17 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows,
More informationBiPAC 7404V series. VoIP/(802.11g) ADSL2+ (VPN) Firewall Router. Quick Start Guide
BiPAC 7404V series VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Quick Start Guide VoIP/(802.11g) ADSL2+ (VPN) Firewall Router For more detailed instructions on configuring and using the Billion VoIP/(802.11g)
More informationwww.digi.com/support June 2013 v. 0.2
Application Note Verizon LTE Provisioning on Digi TransPort www.digi.com/support June 2013 v. 0.2 Page 1 of 7 Contents 1 Introduction... 2 1.1 Purpose... 2 1.2 Necessary Documents / Tools... 2 1.3 Assumptions
More informationBEC 6200WZL. 4G/LTE Cellular Broadband Router. Quick Start Guide
BEC 6200WZL 4G/LTE Cellular Broadband Router Quick Start Guide 1 BEC 6200WZL 4G/LTE Cellular Broadband Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL
More informationWireless Router Setup Manual
Wireless Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10082-02 2006-04 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear,
More informationAolynk DR814Q ADSL2+ Broadband Router Quick Start
Aolynk DR814Q ADSL2+ Broadband Router 1 Packing List Quick Start Unpack the shipping carton carefully and check the following items listed below: One Aolynk DR814Q ADSL2+ Broadband Router One power adapter
More informationInstallation. The product model shown in this QIG is TD-W8961ND, as an example.
Installation The product model shown in this QIG is TD-W8961ND, as an example. Please use only wired network connections to configure the router. Power down all your network devices, including your computer(s)
More informationEricsson W25. Mobile Networks. Quick Installation Guide
Ericsson W25 Fixed Wireless Terminal for WCDMA/HSDPA Mobile Networks Quick Installation Guide Table of Contents INTRODUCTION... 3 Package Contents... 3 Requirements... 3 INSTALLATION... 4 Unit Preparation...
More informationBroadband ADSL2+ Modem Model DM111Pv2 Setup Manual
Broadband ADSL2+ Modem Model DM111Pv2 Setup Manual NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA October 2014 208-10256-02 v1.0 Support Thank you for selecting NETGEAR products. After installing
More informationPlease use only wired network connections to configure the Router.
Note Please use only wired network connections to configure the Router. Power down all of your network devices, including your computer(s) and the Modem Router. If you currently use a modem, disconnect
More informationWIRELESS INTERNET TROUBLESHOOTING GUIDE. 320.834.5151 888.236.3574 www.gctel.com. Help Desk 320.834.5155
WIRELESS INTERNET TROUBLESHOOTING GUIDE 320.834.5151 888.236.3574 www.gctel.com Help Desk 320.834.5155 Table of Contents Check Physical Connection Connection Diagram - Page 1 Power Inserter - Page 2 Identify
More informationCheck Your Package Contents. CD-ROM containing Manual and Warranty
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DVA-G3340S Wireless VoIP Router Before You Begin If you purchased this Router to share your
More informationChapter 1 Installing the Gateway
Chapter 1 Installing the Gateway This chapter describes how to set up the wireless voice gateway on your Local Area Network (LAN), connect to the Internet, and perform basic configuration. For information
More informationLinksys Gateway SPA2100-SU Manual
Linksys Gateway SPA2100-SU Manual Manuel de l'utilisateur Table of Contents Looking for Basic Setup Instructions?... 3 Most Recent Version of this Manual... 3 Advanced Setup Instructions... 4 Wiring Your
More informationP-660HNU-Tx. Wireless N ADSL2+ 4-port Gateway DEFAULT LOGIN DETAILS. Firmware v1.02 Edition 1, 11/2011. IP Address: http://192.168.1.1.
P-660HNU-Tx Wireless N ADSL2+ 4-port Gateway with USB Firmware v1.02 Edition 1, 11/2011 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 User: admin Password: 1234 www.zyxel.com Copyright 2011 ZyXEL
More informationComtrend 1 Port Router Installation Guide CT-5072T
Comtrend 1 Port Router Installation Guide CT-5072T 1 Installing Access Point s DSL Service with a Comtrend Router Thank you for selecting Access Point, Inc. to be your Internet service provider. This guide
More informationComtrend 4 Port Router Installation Guide CT-5361T
Comtrend 4 Port Router Installation Guide CT-5361T 1 Installing Access Point s DSL Service with a Comtrend Router Thank you for selecting Access Point, Inc. to be your Internet service provider. This guide
More informationModel:BL-WDR3750 750Mbps Wireless Dual Band 11AC Router
Quick Installation Guide Model:BL-WDR3750 750Mbps Wireless Dual Band 11AC Router 1.Connecting the device Note: Please use wired network connections only to configure the Router. 1 Connect the WAN port
More informationDVG-2101SP VoIP Telephone Adapter
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DVG-2101SP VoIP Telephone Adapter Before You Begin 1. If you purchased this VoIP Telephone
More informationUTStarcom UT-300R2U. ADSL Modem. UTStarcom, Inc. USER GUIDE. Release: 1.0. Doc. Code:
UTStarcom UT-300R2U ADSL Modem USER GUIDE Release: 1.0 Doc. Code: UTStarcom, Inc. Copyright 2005 UTStarcom, Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any
More informationQuick Reference Guide
Welcome to BT Business Total Broadband Quick Reference Guide Read the information in this Quick Reference Guide to help you start using your new BT Business Total Broadband service powered by fibre. The
More informationQuick Installation Guide DIR-620. Multifunction Wireless Router Supporting GSM, CDMA, WiMAX with Built-in 4-port Switch
DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX with Built-in 4-port Switch BEFORE YOU BEGIN Delivery Package Multifunction wireless router DIR-620 Power adapter DC 5V/2.5A Ethernet cable
More informationHUAWEI HG533 Home Gateway. User Guide HUAWEI TECHNOLOGIES CO., LTD.
HUAWEI HG533 Home Gateway User Guide HUAWEI TECHNOLOGIES CO., LTD. HUAWEI HG533 Home Gateway V100R001 User Guide 202466_02 Huawei Technologies Co., Ltd. provides customers with comprehensive technical
More informationP-660HWP-Dx. Quick Start Guide. 802.11g HomePlug AV ADSL2+ Gateway. Version 3.40 7/2007 Edition 1. Copyright 2007. All rights reserved.
P-660HWP-Dx 802.11g HomePlug AV ADSL2+ Gateway Quick Start Guide Version 3.40 7/2007 Edition 1 Copyright 2007. All rights reserved. Overview The P-660HWP-Dx is a gateway which combines high-speed ADSL
More informationHow To Set Up An Andsl Modem Router For Internet Access
ADSL Modem Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10026-01 2006-2 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear,
More informationADSL MODEM. User Manual V1.0
ADSL MODEM User Manual V1.0 CONTENTS 1.OVERVIEW... 3 1.1 ABOUT ADSL... 3 1.2 ABOUT ADSL2/2+... 3 1.3 FEATURES... 3 2 SPECIFICATION... 4 2.1 INTERFACE INTRODUCTION... 4 2.1.1 INDICATOR AND INTERFACE...
More informationQuick Installation Guide DSL-2640U. Wireless N 150 ADSL2+ Modem Router
DSL-2640U Wireless N 150 ADSL2+ Modem Router BEFORE YOU BEGIN Delivery Package Wireless router DSL-2640U Power adapter DC 12V/0.5A RJ-11 telephone cable Straight-through Ethernet cable (CAT 5E) Splitter
More informationBODi rs BD004 Series Bandwidth-on-Demand Internet with Reliability and Survivability. Quick Start Guide NOTES
NOTES BODi rs BD004 Series Bandwidth-on-Demand Internet with Reliability and Survivability Quick Start Guide This is a Class A device and is not intended for use in a residential environment. Important
More informationChapter 3 Connecting the Router to the Internet
Chapter 3 Connecting the Router to the Internet This chapter describes how to set up the router on your Local Area Network (LAN) and connect to the Internet. It describes how to configure your DG834GT
More informationInternet Telephony PBX system IPX-1980
Internet Telephony PBX system IPX-1980 Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Hardware Installation... 4 2.1 Safety Instruction... 4 2.2 Front panel... 4 2.3 LED & Button
More informationChapter1. Interface Introduction
Robustel GoRugged R3000 Quick Guide Chapter1. Interface Introduction 1.1 LED Indicators After inserting the SIM card into the router and power on, the LED indicators status should be as follow when work
More informationInstalling Your Vonage Device in Front of an Existing Router for customers with DSL INTERNET SERVICE
Installing Your Vonage Device in Front of an Existing Router for customers with DSL INTERNET SERVICE Figure 1. Sample Installation Setup - Vonage phone adapter in front of router 1. Determine Internet
More informationIf no telephone is needed, please connect the LINE port of the Modem Router to the wall jack using the telephone line directly.
Note Please use only wired network connections to configure the Router. Power down all of your network devices, including your computer(s) and the Modem Router. If you currently use a modem, disconnect
More informationDSL-2600U. User Manual V 1.0
DSL-2600U User Manual V 1.0 CONTENTS 1. OVERVIEW...3 1.1 ABOUT ADSL...3 1.2 ABOUT ADSL2/2+...3 1.3 FEATURES...3 2 SPECIFICATION...4 2.1 INDICATOR AND INTERFACE...4 2.2 HARDWARE CONNECTION...4 2.3 LED STATUS
More informationDSL-G604T Wireless ADSL Router
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DSL-G604T Wireless ADSL Router Before You Begin 1. If you purchased this Router to share
More informationInstallation. Note Please use only wired network connections to configure the router.
Installation Note Please use only wired network connections to configure the router. Power down all your network devices, including your computer(s) and the Modem Router. If you currently use a modem,
More informationHow To Set Up A Computer With A Network Connection On A Cdrom 2.5 (For A Pc) Or Ipad (For Mac) On A Pc Or Mac Or Ipa (For Pc) On An Ipad Or Ipro (
Connect the supplied power-adapter to the power inlet port and connect it to a wall outlet. Then, the router automatically enters the self-test phase. During self-test phase, RNX-EasyN400 s Power LED will
More informationDIR-100. Before You Begin. Check Your Package Contents. Triple Play Router
This product can be set up using a current web browser. DIR-100 Triple Play Router Before You Begin Make sure you have all the necessary information and equipment on hand before beginning the installation.
More informationIP Address and Pre-configuration Information
IP Address and Pre-configuration Information Ethernet Connectivity: Connect your workstation or device to the Digi Cellular Device via one of these methods: Direct from workstation to Digi Cellular Device
More informationQuick Start Guide. Cisco SPA232D Mobility Enhanced ATA
Quick Start Guide Cisco SPA232D Mobility Enhanced ATA Package Contents Analog Telephone Adapter Ethernet Cable Phone Cable Power Adapter Quick Start Guide Product CD-ROM Welcome Thank you for choosing
More informationP-2024. Quick Start Guide. VoIP Analog Telephone Adaptor DEFAULT LOGIN. IP Address http://192.168.5.1 Password 1234. Version 3.60 7/2007 Edition 1
P-2024 VoIP Analog Telephone Adaptor Quick Start Guide Version 3.60 7/2007 Edition 1 DEFAULT LOGIN IP Address http://192.168.5.1 Password 1234 Copyright 2007. All rights reserved. Overview Use your P-2024
More informationConnecting the DG-102S VoIP Gateway to your network
Contents of Package: DG-102S VoIP Station Gateway Power adapter CD-ROM, including User s Manual Quick Install Guide Requirements: RS-232 Console Cable Two RJ-45 CAT-5 Straight-Through Cables For more information
More informationTD-8610/TD-8610B External ADSL2+ MODEM
TD-8610/TD-8610B External ADSL2+ MODEM Rev: 1.0.2 1910010011 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other
More informationInstallation. Note The product model shown in this QIG is TD-W8951ND, as an example.
Installation The product model shown in this QIG is TD-W8951ND, as an example. Please use only wired network connections to configure the router. Power down all your network devices, including your computer(s)
More informationInstallation. The product model shown in this QIG is TD-W8951ND, as an example.
Installation Note The product model shown in this QIG is TD-W8951ND, as an example. Note Please use only wired network connections to configure the Router. Before cable connection, keep your hands dry.
More informationInstallation. If you currently use a modem, disconnect it now - the Modem Router will replace your current modem.
Installation Note Please use only wired network connections to configure the Modem Router. If you currently use a modem, disconnect it now - the Modem Router will replace your current modem. Connect your
More informationClick Main on the left hand side then click on Password at the top of the page.
Q: How do I change the password on my router? A: Step 1. Log into the router by entering its IP address into a browser. The default IP address is http://192.168.1.1. The default username is admin with
More informationDRO-210i LOAD BALANCING ROUTER. Review Package Contents
DRO-210i LOAD BALANCING ROUTER Review Package Contents Make sure that the package contains the following items. DRO-210i Load Balancing Router 2 Straight Ethernet Cables 1 Cross Over Ethernet Cable 1 Power
More informationQuick Installation Guide of WLAN Broadband Router
To avoid users without access right through your WLAN Broadband Router, suggest that use security mechanism like WEP, WPA or set ID/password for web configuration login IP address 192.168.1.254. Preparation
More informationFront LEDs... 2 Rear Ports... 3 BASIC INSTALLATION... 4 Connecting Your Router... 5 Network Configuration... 6
0 P a g e Table of contents Front LEDs... 2 Rear Ports... 3 BASIC INSTALLATION... 4 Connecting Your Router... 5 Network Configuration... 6 Gateway Configuration... 11 Accessing your gateway... 11 Displaying
More informationHG659 Home Gateway. User Guide HUAWEI TECHNOLOGIES CO., LTD.
HG659 Home Gateway User Guide HUAWEI TECHNOLOGIES CO., LTD. Product Overview...................................... 1 Ports and Buttons.................................................. Indicators.........................................................
More informationP-791R v2. Quick Start Guide. G.SHDSL.bis Router DEFAULT LOGIN. Administrator Password 1234. User Password. Version 1.00 4/2007 Edition 1
P-791R v2 G.SHDSL.bis Router Quick Start Guide Version 1.00 4/2007 Edition 1 DEFAULT LOGIN IP Address http://192.168.1.1 Administrator Password 1234 User Password user Copyright 2007. All rights reserved.
More informationRedRapid X WIRELESS MODEM ROUTER. Quick Installation Guide (DN-7060)
RedRapid X WIRELESS MODEM ROUTER Quick Installation Guide (DN-7060) 1. Product Introduction Congratulations on purchasing this Wireless N ADSL2/2+ Router. This router is a cost-effective ADSL2+ router,
More informationQuick Start Guide. RV 120W Wireless-N VPN Firewall. Cisco Small Business
Quick Start Guide Cisco Small Business RV 120W Wireless-N VPN Firewall Package Contents Wireless-N VPN Firewall Ethernet Cable Power Adapter Quick Start Guide Documentation and Software on CD-ROM Welcome
More informationQuick Installation Guide
Quick Installation Guide TEW-432BRP H/W: v.d1.0r Table of Contents... 1 1. Before You Start... 1 2. Install Router... 2 3. Replacing an existing router... 5 4. Adding the router behind an existing router...
More informationQuick & Easy Set-Up of Packet8 Internet Phone Service
For the Way You Live & Work Quick & Easy Set-Up of Packet8 Internet Phone Service Welcome to Packet8 Internet Phone Service. Soon, you ll be able to make all your calls over the Internet and save a bundle
More informationDisclaimers. Important Notice
Disclaimers Disclaimers Important Notice Copyright SolarEdge Inc. All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
More informationSetup Manual for the DG834GV Integrated ADSL Modem and Wireless Router with Voice. NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA
Setup Manual for the DG834GV Integrated ADSL Modem and Wireless Router with Voice NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10042-02 April 2007 2007 by NETGEAR, Inc. All rights
More informationUK Quick Install Guide
BiPAC 8800NL ADSL2/2+ Modem VDSL2 Modem (FFTC Fibre) Wireless N Router 3 x10/100 switch plus 1 x GigaPort UK Quick Install Guide This guide covers only the initial Internet set-up and other basic configuration.
More informationPhone Adapter. with 2 Ports for Voice-over-IP. Installation and Troubleshooting Guide. Model No. PAP2 Ver. 2. Voice
Phone Adapter with 2 Ports for Voice-over-IP Voice Installation and Troubleshooting Guide Model No. PAP2 Ver. 2 Copyright and Trademarks Specifications are subject to change without notice. Linksys is
More informationTP-LINK TD-W8901G. Wireless Modem Router. Advanced Troubleshooting Guide
TP-LINK TD-W8901G Wireless Modem Router Advanced Troubleshooting Guide Released on 2009.09.25 Version 1.0 Content Summary... 3 Troubleshooting Flow Chart and Resolutions... 3 Check 1... 3 Check 2... 4
More informationPePWave Surf Series PePWave Surf Indoor Series: Surf 200, AP 200, AP 400
PePWave Surf Series PePWave Surf Indoor Series: Surf 200, AP 200, AP 400 PePWave Surf Outdoor Series: Surf AP 200/400-X, PolePoint 400-X, Surf 400-DX User Manual Document Rev. 1.2 July 07 COPYRIGHT & TRADEMARKS
More informationWelcome. Unleash Your Phone
User Manual Welcome Unleash Your Phone For assistance with installation or troubleshooting common problems, please refer to this User Manual or Quick Installation Guide. Please visit www.vonage.com/vta
More informationEnglish version. LW320/LW321 Sweex Wireless 300N Router. Package Contents. Terminology list
LW320/LW321 Sweex Wireless 300N Router Do not expose the Sweex Wireless 300N Router to extreme temperatures. Do not place the device in direct sunlight or in the direct vicinity of heating elements. Do
More informationNeoGate TA Series Installation Guide
NeoGate TA Series Installation Guide Version 1.2 Date: April 1, 2015 Yeastar Information Technology Co. Ltd Contents 1. Preparation before Installation... 3 2. Hardware Specifications... 5 2.1 Overview...
More information801.11n Wireless Broadband Router
801.11n Wireless Broadband Router WNRT-626 Quick Installation Guide Table of Contents Hardware Installation... 4 Web Configuration... 6 Further Configuration... 8 Thank you for purchasing PLANET 801.11n
More informationMyPBX U100 & U200 Installation Guide
MyPBX U100 & U200 Installation Guide Version: V1.0 Yeastar Technology Co., Ltd Date: 25 th February, 2013 http://www.yeastar.com 1/14 Contents MyPBX U100 & U200 Installation Guide 1. PREPARATION BEFORE
More informationConfiguring PPP And SIP
Copyright Copyright 2005. All rights reserved. The content of this manual is subject to change without notice. The information and messages contained herein are proprietary to. No part of this manual may
More informationUSER GUIDE AC2400. DUAL BAND GIGABIT Wi Fi ROUTER. Model# E8350
USER GUIDE AC2400 DUAL BAND GIGABIT Wi Fi ROUTER Model# E8350 Table of Contents Product overview E8350..................................... 1 Setting Up Your E-Series Router Where to find more help.........................
More informationNETCOMM LIBERTY SERIES. 3G WiFi Router. Quick Start Guide
NETCOMM LIBERTY SERIES 3G WiFi Router Quick Start Guide Connecting to the Router using 1an Ethernet cable SIM Card Computer 1. Insert an active 3G SIM card into the USIM slot on the back of the device.
More informationBroadband Router ESG-103. User s Guide
Broadband Router ESG-103 User s Guide FCC Warning This equipment has been tested and found to comply with the limits for Class A & Class B digital device, pursuant to Part 15 of the FCC rules. These limits
More informationSOHO 6 Wireless Installation Procedure Windows 95/98/ME with Internet Explorer 5.x & 6.0
SOHO 6 Wireless Installation Procedure Windows 95/98/ME with Internet Explorer 5.x & 6.0 Before You Begin Before you install the SOHO 6 Wireless, you must have: A computer with a 10/100BaseT Ethernet card
More informationP-870HN-51b. 802.11n VDSL2 4-port Gateway DEFAULT LOGIN DETAILS. Firmware v1.00 Edition 1, 9/2009. IP Address: http://192.168.1.1.
P-870HN-51b 802.11n VDSL2 4-port Gateway Firmware v1.00 Edition 1, 9/2009 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 Username: admin Password: 1234 www.zyxel.com Copyright 2009 ZyXEL Communications
More informationB890 4G LTE Smart Hub Getting Started Guide
B890 4G LTE Smart Hub Getting Started Guide HUAWEI TECHNOLOGIES CO., LTD. Thank You for Purchasing the B890 4G LTE Smart Hub! Before You Begin What s in the Box : 1. B890 4G LTE Smart Hub 2. Power adapter
More informationWireless-N Router Setup Manual
Wireless-N Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA May 2008 208-10259-01 v1.0 2008 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR and the NETGEAR
More informationAXIS 205 Network Camera Quick Installation Guide
AXIS 205 Quick Installation Guide Page 1 of 6 AXIS 205 Network Camera Quick Installation Guide Focus Ring Status Indicator (surrounding the focus ring) Serial number Network Indicator Control Button Power
More information802.11n Wireless Broadband Router WNRT-625
802.11n Wireless Broadband Router WNRT-625 Quick Installation Guide Table of Contents Introduction... 3 Package Content... 4 Hardware Installation... 5 Web Configuration... 8 Further Configuration...11
More informationN600 Wireless Dual Band Router WNDR3400 Setup Manual
N600 Wireless Dual Band Router WNDR3400 Setup Manual NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134 USA March 2010 208-10532-03 v1.0 Trademarks NETGEAR and the NETGEAR logo are registered trademarks,
More informationBroadband ADSL2+ Modem DM111PSPv2
Broadband ADSL2+ Modem DM111PSPv2 User Manual 350 East Plumeria Drive San Jose, CA 95134 USA August 2011 202-10913-01 v1.0 2011 NETGEAR, Inc. All rights reserved No part of this publication may be reproduced,
More informationWLAN600 Wireless IP Phone Administrator s Guide
WLAN600 Wireless IP Phone Administrator s Guide Trademark Acknowledgement All brand names are trademarks or registered trademarks of their respective companies. Disclaimer This document is supplied by
More informationHUAWEI HG655a. Home Gateway Quick Start
HUAWEI HG655a Home Gateway Quick Start 1 Introduction 1.1 Contents in the package HG655a Splitter Power Adapter Telephone Cables Ethernet Cable User CD-ROM General Public License Warranty Card 1 1.2 The
More informationP-660HN-51. 802.11n Wireless ADSL2+ 4-port Gateway DEFAULT LOGIN DETAILS. Firmware Version 1.10 Edition 1, 9/2010. IP Address: http://192.168.1.
P-660HN-51 802.11n Wireless ADSL2+ 4-port Gateway Firmware Version 1.10 Edition 1, 9/2010 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 User Name: admin Password: 1234 www.zyxel.com Copyright 2010
More informationQuick Start Guide. WRV210 Wireless-G VPN Router with RangeBooster. Cisco Small Business
Quick Start Guide Cisco Small Business WRV210 Wireless-G VPN Router with RangeBooster Package Contents WRV210 Router Ethernet Cable Power Adapter Product CD-ROM Quick Start Guide Welcome Thank you for
More informationP-660HW-Tx v3. 802.11g Wireless ADSL2+ 4-port Gateway DEFAULT LOGIN DETAILS. Firmware v3.70 Edition 1, 2/2009
P-660HW-Tx v3 802.11g Wireless ADSL2+ 4-port Gateway Firmware v3.70 Edition 1, 2/2009 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 Admin Password: 1234 User Password: user www.zyxel.com Copyright
More informationQuick Installation Guide DAP-1360. Wireless N 300 Access Point & Router
DAP-1360 Wireless N 300 Access Point & Router BEFORE YOU BEGIN Delivery Package Access point DAP-1360 Power adapter DC 12V Ethernet cable (CAT 5E) (brochure). If any of the items are missing, please contact
More informationLET S GO. Get your Ultra Broadband ready Business gateway up and running
LET S GO Get your Ultra Broadband ready Business gateway up and running CONTENTS BUSINESS GATEWAY ULTRA BROADBAND READY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Equipment Check 2 Getting Started 3 Setting Up
More informationN150 Wireless Router WNR1000 Setup Manual
N150 Wireless Router WNR1000 Setup Manual NETGEAR, Inc. 350 E. Plumeria Drive Santa Jose, CA 95134 USA January 2009 208-10430-01 v1.0 2009 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR and the
More informationN300 Wireless Gigabit Router Setup Manual
N300 Wireless Gigabit Router Setup Manual NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134 USA June 2010 208-10443-03 v1.0 2010 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR and the NETGEAR
More informationUser Manual. EtherUSB
User Manual EtherUSB USB Ethernet Access Point for PDA V 2.0 Clarinet Systems, Inc. Clarinet Systems, Inc. http://www.clarinetsys.com Page 1 Publication Revision No. Control Table Rev. No. Date Contents
More informationN600 Wireless Dual Band Gigabit Router WNDR3700v3 Setup Manual
N600 Wireless Dual Band Gigabit Router WNDR3700v3 Setup Manual NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134 USA May 2011 208-10774-02 v1.0 2011 by NETGEAR, Inc. All rights reserved. Trademarks
More informationHello Look inside to see how to set up your new Wireless Connector
Hello Look inside to see how to set up your new Wireless Connector Set Up Guide Contents Get connected Check what s in the box 5 your internet connection 6 Plug in your Wireless Connector 7 Connect your
More informationV660. Quick Start Guide. Dual-Mode Phone. Version 1.00 04/2007 Edition 1. Copyright 2007. All rights reserved
V660 Dual-Mode Phone Quick Start Guide Version 1.00 04/2007 Edition 1 Copyright 2007. All rights reserved 1 Overview Your V660 provides standard cellphone functions, and adds WiFi connectivity. In the
More informationADSL Router Quick Installation Guide Revised, edited and illustrated by Neo
ADSL Router Quick Installation Guide Revised, edited and illustrated by Neo A typical set up for a router PCs can be connected to the router via USB or Ethernet. If you wish to use a telephone with the
More information