Release: 1. UEE43211 Certificate IV in Industrial Automation and Control

Transcription

1 Release: 1 UEE43211 Certificate IV in Industrial Automation and Control

2 UEE43211 Certificate IV in Industrial Automation and Control Date this document was generated: 27 May 12 UEE43211 Certificate IV in Industrial Automation and Control Modification History Description Scope This qualification provides competencies to assemble, set up and program, fault find, repair and maintain automated equipment, apparatus, associated circuits and systems. It s includes the supervision of plant maintenance programs and providing technical advice to process staff. Pathways Information Licensing/Regulatory Information Entry Requirements Employability Skills Summary Approved Page 2 of 8 Commonwealth of Australia, 12 EE-Oz Training Standards

3 UEE43211 Certificate IV in Industrial Automation and Control Date this document was generated: 27 May 12 Packaging Rules Completion requirements The requirements for granting this qualification will be met when competency is demonstrated and achieved for: All the Core competency standard units, defined in the Core Competency Standard Units table below and A combination of Elective competency standard units to achieve a total weighting of 7 points in accordance with the Elective Competency Standard Units table below. Core Competency Standard Units All Core competency standard units to be achieved UEENEED104A Use software for engineering applications UEENEEE038B UEENEEE101A Participate in development and follow a personal competency development plan Apply Occupational Health Safety regulations, codes and practices in the workplace UEENEEE102A Fabricate, dismantle, assemble utilities components UEENEEE104A Solve problems in d.c. circuits 80 UEENEEE107A UEENEEE117A Use drawings, diagrams, schedules, standards, codes and specifications Implement and monitor energy sector OHS policies and procedures UEENEEE119A Solve problems in multiple path a.c. circuits UEENEEE124A Compile and produce an energy sector detailed report UEENEEE137A UEENEEI138A UEENEEK145A Document and apply measures to control OHS risks associated with electrotechnology work Provide solutions to ELV electro-pneumatic control systems and drives Implement and monitor energy sector policies and procedures for environmental and sustainable work practices UEPOPS2A Apply Quality Systems To Work Approved Page 3 of 8 Commonwealth of Australia, 12 EE-Oz Training Standards

4 UEE43211 Certificate IV in Industrial Automation and Control Date this document was generated: 27 May 12 Core Competency Standard Units All Core competency standard units to be achieved UEPOPS337A Maintain Quality Systems within the Team UEPOPS416A Monitor the Implementation of the Enterprise s Production / Maintenance Quality Control procedures Total points in core 5 Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 7 points from the following groups: Group Minimum points Maximum points A Imported and Common Elective Units Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. 0 2 B Qualification Elective Units 0 5 C Qualification Elective Units You may select all your elective units from this Group 2 7 Group A Imported and Common Elective Units. You may complete units to a maximum weighting of 2 UEENEEC001B Maintain documentation UEENEEC002B Source and purchase material/parts for installation or service jobs UEENEEC003B Provide quotations for installation or service jobs UEENEEC010B Deliver a service to customers UEENEED101A Use basic computer applications relevant to a energy sector workplace Approved Page 4 of 8 Commonwealth of Australia, 12 EE-Oz Training Standards

5 UEE43211 Certificate IV in Industrial Automation and Control Date this document was generated: 27 May 12 UEENEEE009B UEENEEE0B Comply with scheduled and preventative maintenance program processes Provide basic instruction in the use of electrotechnology apparatus BSBINN301A Promote Innovation in a team Environment BSBCUS1B Coordinate implementation of customer service strategies BSBINM1A Implement workplace information system BSBLED1A Develop teams and individuals BSBMGT2A Implement operational plan BSBMGT3A Implement continuous improvement BSBWOR1A Establish effective workplace relationships 50 BSBWOR2A Promote team effectiveness 50 BSBWOR4B Develop Work Priorities TLILIC108A Licence to operate a forklift truck HLTCPR1B Perform CPR 10 Group B Qualification Elective Units. You may complete units to a maximum weighting of 5 UEENEED102A Assemble, set-up and test personal computer hardware 80 UEENEED146A Set up and configure basic local area network (LAN) UEENEEF108A Select and arrange equipment for wireless communication networks UEENEEG111A Carry out repairs to electrical apparatus UEENEEG101A Solve problems in electromagnetic devices and related circuits UEENEEG102A Solve problems in low voltage a.c. circuits 80 UEENEEG106A Terminate cables, cords and accessories for low voltage circuits Approved Page 5 of 8 Commonwealth of Australia, 12 EE-Oz Training Standards

6 UEE43211 Certificate IV in Industrial Automation and Control Date this document was generated: 27 May 12 UEENEEG164A Repair mechanical components of electrical machines UEENEEH111A Troubleshoot d.c. power supplies with single phase input UEENEEH114A Troubleshoot frequency dependent circuits 80 UEENEEI101A UEENEEI102A UEENEEI103A Use instrumentation drawings, specifications, standards and equipment manuals Solve problems in pressure measurement circuits and systems Solve problems in density/level measurement circuits and systems UEENEEI104A Solve problems in flow measurement circuits and systems UEENEEI105A Solve problems in temperature measurement circuits and systems UEENEEI106A Set up and adjust PID process control loops UEENEEI107A Install process instrumentation and tubing and control cabling UEENEEI108A Install process control apparatus and associated equipment UEENEEI110A Set up and adjust advanced process control loops UEENEEI111A Find and rectify faults in process final control elements UEENEEI112A UEENEEI113A UEENEEI116A UEENEEI150A Verify compliance and functionality of instrumentation and control installations Setup and configure human-machine interface (HMI) and industrial networks Enter and verify operating instructions in microprocessor equipped devices Develop, enter and verify discrete control programs for programmable controllers UEENEEM080A Report on the integrity of explosion-protected equipment in a hazardous area UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply Approved Page 6 of 8 Commonwealth of Australia, 12 EE-Oz Training Standards

7 UEE43211 Certificate IV in Industrial Automation and Control Date this document was generated: 27 May 12 UEENEEP025A UEENEEP026A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply Conduct in-service safety testing of electrical cord assemblies and cord connected appliances/equipment Group C Qualification Elective Units. You must complete units to a minimum weighting of 2 You may select all your elective units from this Group UEENEED117A Install and configure Internetworking systems 1 UEENEEI119A Set up industrial field control devices UEENEEI1A Provide solutions to problems in industrial control systems UEENEEI121A Find and repair faults in measuring and analysis systems UEENEEI122A Assist in commissioning process control systems UEENEEI125A Provide solutions to fluid circuit operations UEENEEI126A Provide solutions to pneumatic/hydraulic system operations 80 UEENEEI139A Diagnose and rectify faults in digital controls systems UEENEEI148A UEENEEI149A UEENEEI151A UEENEEI152A Provide solutions to single phase electronic power control problems Provide solutions to polyphase electronic power control problems Develop, enter and verify programs for industrial control systems using high level instructions Develop, enter and verify programs in Supervisory Control and Data Acquisition systems UEENEEI155A Develop structured programs to control external devices Note: 1. Prerequisite pathways shall be identified and met for all elective units selected. 2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level. Approved Page 7 of 8 Commonwealth of Australia, 12 EE-Oz Training Standards

8 UEE43211 Certificate IV in Industrial Automation and Control Date this document was generated: 27 May Registered training organisations shall also provide information related to the relevant pathway(s) that may be taken to achieve paraprofessional status ("associate membership") with a professional engineering membership organisation. END OF QUALIFICATION Custom Content Section Approved Page 8 of 8 Commonwealth of Australia, 12 EE-Oz Training Standards