Check/ Pilot Controlled Check Valves
|
|
- Grant Paul
- 7 years ago
- Views:
Transcription
1 heck/ Pilot ontrolled heck s Type Graphic Symbols Max. Operating Pressure U.S.GPM.3. L/min Page In-Line (IT) 3 heck s (33) Right ngle (RT/RG) 3 98 Right ngle, langed onnection (R) Pilot Operated heck s (33) Threaded onnection(p T) Mounting(P G) 3 langed onnection(p ) heck/ Pilot ontrolled heck s 97
2 In-Line heck s These valves allow free flow in one direction and prevent flow in the reverse direction. racking pressure specified is the pressure required to open the valve and allow free flow. Graphic Symbol Specifications Rated low L/min (U.S.GPM) Max. Operating Pres. racking Pres. pprox. Mass kg (lbs.) IT-- -/8/9 IT-3- -/8/9 IT-- -/8/9 IT-- -/8/9 (.3) 3 (7.93) 8 (.) 3 (.8) (33). ().3 (). (7). (.).3 (.).8 (.8).3 (.) Rated flow is the approximate flow rate, when there is a free flow pressure drop of maximum.3 ( ), the fluid has a specific gravity of.8 and a kinematic viscosity of mm /s (98 SSU), and the cracking pressure is. ( ). Model Number esignation I T Series Number I: In-Line heck Type of onnection T: Threaded onnection 3 racking Pressure :. () 3:.3 () :. (7) esign Number esign Standards None: Japanese Std. "JIS" 8: uropean esign Std. 9: N. merican esign Std. Note: or In-Line heck s, standard type (for petroleum base oils) can be used phosphate ester type fluid. IT-- -/8/9 IT-3- -/8/9 IT-- -/8/9 IT-- -/8/9 "" Thd. Places Outlet Port Inlet Port R mm (Inches) "" Thd. IT-- - IT-- -8 IT (.8) (.) 8 (.8) 9 (.7) (.87) 9 (.7) Rc / / SP. / NPT IMNSIONS IN MILLIMTRS (INHS) IT (.99) Rc 3/8 IT (3.7) 7 (.) 3/8 SP. IT (.99) 3/8 NPT IT (3.7) Rc 3/ IT-- -8 (.) (.) 3/ SP. IT (3.7) 3/ NPT IT-- - Rc -/ IT (.) (.3) -/ SP. IT / NPT 98 heck/ Pilot ontrolled heck s
3 In-Line heck s IRTIONL ONTROLS Pressure rop Hydraulic luid: Viscosity 3 mm /s ( SSU), Specific Gravity.8 IT-.7 IT IT--3 IT-- L/min 3 U.S.GPM IT IT-3-3 IT-3- IT-3-3 L/min 8 U.S.GPM IT IT-- IT--3. IT-- 7 L/min 3 U.S.GPM IT IT-- IT--3. IT-- 3 L/min 8 U.S.GPM In-Line heck s 99
4 Right ngle heck s These valves allow free flow in one direction and prevent flow in the reverse direction. racking pressure specified is the pressure required to open the valve and allow free flow. Graphic Symbol Specifications Type of onnection Threaded onnection Mounting RT-3- -/8/9 RT-- -/8/9 RT-- -/8/9 RG-3- -/9 RG-- -/9 RG-- -/9 Rated low L/min (U.S.GPM) (.) (33) () (.) (33) () Max. Operating Pres. (33) (33) Model Number esignation - R T Special Seals Series Number Type of onnection racking Pressure esign Number T: 3 :. () : Special seals Threaded 3:.3 () for phosphate R: onnection :. (7) ester type Right ngle fluids heck G: 3 :. () (Omit if not 3:.3 () required) Mounting :. (7) Model Numbers RG-3 RG- RG- Japanese Standard "JIS" uropean esign Standard N.merican esign Standard RGM-3- RGM-3X- RGM-- RGM-X- RGM-- RGM-X- Thread Rc 3/8 Rc / Rc 3/ Rc Rc -/ Rc -/ RGM-3-8 RGM-3X-8 RGM--8 RGM-X-8 RGM--8 RGM-X-8 Thread 3/8 SP. / SP. 3/ SP. SP. -/ SP. -/ SP. RGM-3-9 RGM-3X-9 RGM--9 RGM-X-9 RGM--9 RGM-X-9 racking Pres.. ().3 (). (7). ().3 (). (7) Rated flow is the approximate flow rate, when there is a free flow pressure drop of maximum.3 ( ), the fluid has a specific gravity of.8 and a kinematic viscosity of mm /s (98 SSU), and the cracking pressure is. ( ). esign Standards pprox. Mass kg (lbs.).9 (.).7 (3.7). (.3).7 (3.7).9 (.). (.) None: Japanese Std. "JIS" 8: uropean esign Std. 9: N. merican esign Std. None: Japanese Std. "JIS" & uropean esign Std. 9: N. merican esign Std. Thread 3/8 NPT / NPT 3/ NPT NPT -/ NPT -/ NPT pprox. Mass kg (lbs.). (3.). (3.). (.3) 3. (.).8 (.).7 (.) s are available. Specify the sub-plate model number from the table above. When sub-plates are not used, the mounting surface should have a good machined finish. Yuken can offer flanged connection valves described below. or details, contact us. Model No. R-- - R-- - R-- - Rated low L/min (U.S.GPM) 3 (79.3) (9) 3 (33) Max. Operating Pressure (33) Mounting olts Socket head cap screws in the table below are included. Model Numbers RG-3 RG- RG- Socket Head ap Screw Japanese Standard "JIS" uropean esign Standard N.merican esign Standard M Lg. 3/8- UN -3/ Lg. M Lg. 3/8- UN Lg. M Lg. 3/8- UN -/ Lg. Qty. Right ngle heck s
5 Right ngle heck s IRTIONL ONTROLS RT-3- -/8/9 RT-- -/8/9 RT-- -/8/9 Inlet Port Outlet Port "H" Thd. Places RT-3- - RT RT RT-- - RT-- -8 RT-- -9 RT-- - RT-- -8 RT-- -9 imensions mm (Inches) (.) 7 (.9) 7 (.) 3 (.) (.77) (.) 38 (.) ia 8. (3.7). (.3) (.) ia. 8 (3.) SQ. IMNSIONS IN MILLIMTRS (INHS) 3 (.) 33 (.3) 9 (.93) (.) (.73) (.3) 8 (3.) "H" Thd. Rc 3/8 3/8 SP. 3/8 NPT Rc 3/ 3/ SP. 3/ NPT Rc -/ -/ SP. -/ NPT RG-3- -/9 RG-- -/9 Inlet Port Outlet Port H (.) R Locating Pin (.) ia. (.3) ia. Through 7.(.9) ia. Spotface Places J Mounting Surface (s urnished) RG-3 RG- imensions mm (Inches) H J 9 (3.) (.).7 (.3) 79. (3.3).7 (.).3 (.) 7 (.83) 93 (3.).9 (.9).3 (.37) 7. (.9). (.8) 7. (.8) 8. (3.33) 3 (.8) 3 (.38) Mounting Surface ISO 78-G--- ISO 78-H-8-- RG-- -/9 Mounting surface: ISO 78-J--- Inlet Port Outlet Port 97 (3.8) (.) 3 (.8) 8. (3.3). (.) R Locating Pin (.) ia..3 (.8). (.) 9.8 (3.8) (.7) (.3) ia. Through 7.(.9) ia. Spotface Places (.7) Mounting Surface (s urnished) Right ngle heck s
6 RGM-3-/8/9 RGM-3X-/8/9 9(3.) (.39) 7(.7).7(.7).7(.3) 8.8(.3) ia. Through 33.3 (.) ia. Spotface (.3) Places.9 (.9) 3.7 (.) 3.8 (.) 7. (.8) "" Thd. Places RGM--/8/9 RGM-X-/8/9 8.8(.3) ia. Through (.) ia. Spotface Places 3(.) ia. Places "" Thd. (.79) eep Places 9. (.77) (.83) (.) 8 (3.3) (.) 7(.8) ia. (.39) eep.3 (.) (.39) (.) 79.(3.3) 39.7 (.) 9 (3.) 3(.) (.87) ia. Places "J" Thd. (.79) eep Places (.9) RGM-3- RGM-3-8 RGM-3-9 RGM-3X- RGM-3X-8 RGM-3X-9 (.9) Thread "" Thd. "" Thd. Rc 3/8 M 3/8 SP. 3/8 NPT 3/8- UN Rc / M / SP. / NPT 3/8- UN IMNSIONS IN MILLIMTRS (INHS). (.).3 (.37) 9. (.9). (.7) (.87) (.9) "H" Thd. Places 7(.8) ia. (.39) eep RGM-- RGM--8 RGM--9 RGM-X- RGM-X-8 RGM-X-9 (.88) 3 (.3) (.39) (.3) imensions mm (Inches) 77 (3.3) 8.3 (3.) 8 (3.) 8.3 (3.) 7 (.) (.87) (.9) (.87) 3 (.) (.77) (.33) 3 (.) Thread "H" Thd. "J" Thd. Rc 3/ M 3/ SP. 3/ NPT 3/8- UN Rc M SP. NPT 3/8- UN RGM--/8/9 RGM-X-/8/9 (.7) 9.(.38) (.3) ia. Through 7.(.9) ia. Spotface Places (.) (.7) 9.8 (3.8) 8. (.9) 8(.) ia. Places 7(.8) ia. (.39) eep 9 (.7) 8. (3.3) 7. (.).7 (.7). (.) (.83) (.9) RGM-- RGM--8 RGM--9 RGM-X- RGM-X-8 RGM-X-9 (.9) 77 (.97).7 (.) "H" Thd. Places (.7). (.) imensions mm (Inches) 9 (3.78) (.9). (.) (.7) 3 (.8) (.87) (.77) (.97) "J" Thd. (.79) eep Places 3 (.3) 7 (.7) Thread "H" Thd. "J" Thd. Rc -/ M -/ SP. -/ NPT 3/8- UN Rc -/ M -/ SP. -/ NPT 3/8- UN Right ngle heck s
7 Right ngle heck s IRTIONL ONTROLS Pressure rop Hydraulic luid: Viscosity 3mm /s ( SSU), Specific Gravity.8 RT-3 RG RT-3-.. RT-3-3 RT L/min RG-3-. RG-3-3. RG-3-3 L/min RT- U.S.GPM... RT RT--3. RT L/min RG- U.S.GPM... RG--.8. RG--3. RG L/min RT- 3 U.S.GPM.. RT RT--3. RT L/min RG U.S.GPM RG--.8. RG--3. RG L/min List of Seals U.S.GPM RT-3-/8/9 RT--/8/9 RT--/8/9 List of Seals & Seal Kits Part Numbers Item Name of Parts Qty. RT-3 RT- RT- 7 Seal Kit 8 U.S.GPM SO-N-P SO-N-P SO-N-P3 KS-RT-3- KS-RT-- KS-RT-- When ordering the s, please specify the seal kit number from the table above. RG-3-/9 RG--/9 RG--/ List of Seals & Seal Kits Item Name of Parts Part Numbers RG-3 RG- RG- Qty. 7 8 SO-N-P SO-N-P8 SO-N-P SO-N-P8 SO-N-P3 SO-N-P3 Seal Kit KS-RG-3- KS-RG-- KS-RG-- When ordering the s, please specify the seal kit number from the table above. Right ngle heck s 3
8 Pilot Operated heck s These check valves allow flow in one direction and prevent flow in the reverse direction, until operated by pilot pressure to allow free reverse flow. The specified cracking pressure is required to open the valve to allow free flow direction. Graphic Symbols Internal rain Type xternal rain Type Specifications Type of onnection Threaded onnection Mounting PT/PT PT/PT PT/PT PG/PG PG/PG PG/PG Rated low L/min (U.S.GPM) (.) (33) () (.) (33) () Max. Operating Pres. (33) (33) racking Pres.. (). (9).3 (). (7). (). (9).3 (). (7) Rated flow is the approximate flow rate, when there is a free flow pressure drop of maximum.3 ( ), the fluid has a specific gravity of.8 and a kinematic viscosity of mm /s (98 SSU), and the cracking pressure is. ( ). pprox. Mass kg (lbs.) 3. (.). (.) 9. (.) 3.3 (7.3). (.9) 8. (8.7) Model Number esignatioin - P T Special Seals Series Number Type of onnection rain onnection racking Pres. esign Number : Special Seals for Phosphate ster Type luids (Omit if not required) P: Pilot Operated heck P: ecompression Type Pilot Operated heck T: Threaded onnection G: Mounting 3 3 None: Internal rain : xternal rain :. () :. (9) 3:.3 () :. (7) esign Standards None: Japanese Std. "JIS" 8: uropean esign Std. 9: N. merican esign Std. None: Japanese Std. "JIS" & uropean esign Std. 9: N. merican esign Std. Mounting olts Socket head cap screws in the table below are included. Model Numbers P G-3 P G- P G- Socket Head ap Screw Japanese Standard "JIS" & uropean esign Standard M Lg. M Lg. M Lg. N.merican esign Standard 3/8- UN -3/ Lg. 3/8- UN Lg. 3/8- UN -/ Lg. Qty. Yuken can offer flanged connection valves described below. or details, contact us. P P Rated low L/min (U.S.GPM) () (9) Max. Operating Pressure (33) (33) Pilot Operated heck s
9 Pilot Operated heck s IRTIONL ONTROLS Model Numbers P G-3 P G- P G- Japanese Standard "JIS" HGM-3- HGM-3X- HGM-- HGM-X- HGM-- HGM-X- Thread Rc 3/8 Rc/ Rc 3/ Rc Rc -/ Rc -/ uropean esign Standard HGM-3-8 HGM-3X-8 HGM--8 HGM-X-8 HGM--8 HGM-X-8 Thread 3/8 SP. / SP. 3/ SP. SP. -/ SP. -/ SP. N. merican esign Standard HGM-3-9 HGM-3X-9 HGM--9 HGM-X-9 HGM--9 HGM-X-9 Thread 3/8 NPT / NPT 3/ NPT NPT -/ NPT -/ NPT pprox. Mass kg (lbs.). (3.). (3.). (.3) 3. (.).8 (.).7 (.) s are available, specify the sub-plate model number from the table above. When sub-plates are not used, the mounting surface should have a good machined finish. s are shared with those for H Type Pressure ontrol s. Refer to pages to for dimensions. Instructions Operation of internal and external drain types When the outlet side P is directly connected to the tank in reversed free flow (ig. a), the internal drain type is normally used. When the back pressure is applied to the outlet side P (ig. b), be sure to use the external drain type. Minimum pilot pressure characteristics That depends on the pressure of the inlet side P in the reversed free flow. This value can be determined from the characteristics chart. autions on replacementof design low cracking pressure type valves with design valves. In design valve with cracking pressure of.3 ( ) (ode ""), for closing the valve completely and certainly, it was necessar y to introduc e the pressurize d oil into the drain port to push down the piston compulsory. While in design valve with cracking pressure of. ( ) (ode ""), it has such structure that the valve can be closed completely and certainly without introducing the pressurized oil into the drain port. On the contrary, what is worse is that if the pressurized oil is introduced into the drain port, the oil acts towards the direction o f opening the valve, which i s very dangerous and has to be absolutely avoided. Therefore, please do not supply any pressurized oil into the drain port in case of using design valve. P P (ig.a) R P P (ig.b) WRNING The machinery, if misused due to failure to observe the "autions" on the left, may perform unforeseeable movements, resulting in a disastrous accident. Pilot Operated heck s
10 PT/PT /8/9 PT/PT-- - -/8/9 PT/PT-- - -/8/9 H J R ree low Inlet or Reversed ontrolled low Outlet Port "N" Thd. L K ree low Outlet or Reversed ontrolled low Inlet Port "N" Thd. rain Port "P" Thd. Pilot Port "P" Thd. PT/PT PT/PT PT/PT PT/PT PT/PT PT/PT PT/PT PT/PT PT/PT imensions mm (Inches) Thread H J K L "N" Thd. "P" Thd. 8 (3.) 9 (3.78) (.) (.7) 8 (.89) 7 (.7) 39 (.) 7 (.8) (.). (.93) 7. (.7) 3. (8.) 8. (3.33) 9. (3.) 3 (.) 38 (.) ia. (.) SQ. 8 (3.) SQ. (.3) 7 (.83) 8 (3.3) 9 (.) 3 (.38) (.7) 7. (.) 7. (.97) 9 (3.78). (.) 3 (.) 3 (.9) Rc 3/8 3/8 SP. 3/8 NPT Rc 3/ 3/ SP. 3/ NPT Rc -/ -/ SP. -/ NPT Rc / / SP. / NPT Rc / / SP. / NPT Rc / / SP. /NPT Pilot Operated heck s
11 Pilot Operated heck s IRTIONL ONTROLS PG/PG /9 PG/PG-- - -/9 ree low Outlet or Reversed ontrolled low Inlet Port H J (.) R Locating Pin (.) ia. rain Port Pilot Port Mounting Surface (s urnished) (.3) ia. Through 7.(.9) ia. Spotface Places ree low Inlet or Reversed ontrolled low Outlet Port imensions mm (Inches) H J Mounting Surface PG/PG /9 9 (3.).7 (.3).7 (.). (.93).9 (.9) (.) (.) 3 (.8) ISO 78-G--- PG/PG-- - -/9 (.) 79. (3.3).3 (.) 7. (.7).3 (.37) 7. (.) 7 (.9) 3 (.38) ISO 78-H-8-- PG/PG-- - -/9 Mounting surface: ISO 78-J--- IMNSIONS IN MILLIMTRS (INHS) ree low Outlet or Reversed ontrolled low Inlet Port rain Port. (.) 9 (.9) 9.8 (3.8) 89 (3.) (.7) (.) 3. (8.) 8. (3.3). (.) R Locating Pin (.) ia. Mounting Surface (s urnished) 7 (.7) Pilot Port (.3) ia. Through 7.(.9) ia. Spotface Places ree low Inlet or Reversed ontrolled low Outlet Port Pilot Operated heck s 7
12 Hydraulic luid: Viscosity 3 mm /s ( SSU), Specific Gravity.8 Pressure rop PT-3, PT-3 PG-3, PG P T-3- - P G-3- - P T P T-3- - P G P G-3- - P T P G-3- - Reversed ontrolled low Reversed ontrolled low 3 L/min 3 L/min U.S.GPM PT-, PT Reversed ontrolled low 7 7 L/min 3 U.S.GPM PT-, PT P T-- - P T-- -3 P T-- - P T-- -3 P T-- - P T-- - P T-- - P T Reversed ontrolled low 3 3 L/min 8 U.S.GPM Min. Pilot Pressure hart 7 U.S.GPM PG-, PG Reversed ontrolled low 7 7 L/min 3 U.S.GPM PG-, PG- 3. P G-- - P G P G-- -. P G P G-- - P G-- - P G-- - P G-- -. Reversed ontrolled low 3 3 L/min 8 U.S.GPM Minimum Pilot Pressure (PP) 8 8 P P P PP P PP racking Pressure. (7 ). ( ) racking Pressure. (7 ). ( ) P P PP : Min. Pilot Pressure to open the ecompression 3 3 Supply Pressure (P) Pressure rop for Reversed ontrolled low Only when ecompression is Opened PT-3, PG-3 PT-, PG- PT-, PG- 3 3 L/min 3 U.S.GPM L/min 8 U.S.GPM 3 3 L/min 3 U.S.GPM 8 Pilot Operated heck s
13 IRTIONL ONTROLS List of Seals PT/PT /8/9 PT/PT-- - -/8/9 PT/PT-- - -/8/ List of Seals 9 7 Item Name of Parts Part Numbers PT/PT-3 PT/PT- PT/PT- SO-N-P7 SO-N-P9 SO-N-P9 SO-N-P SO-N-P9 SO-N-P3 3 SO-N-G SO-N-P3 SO-N-P Note: When ordering the seals, please specify the seal kit number from the table below. PG/PG /9 PG/PG-- - -/9 PG/PG-- - -/9 List of Seals Item 3 Name of Parts 8 PG/PG-3 SO-N-P7 SO-N-P9 SO-N-P8 SO-N-P SO-N-G PT/PT /8/9 PT/PT-- - -/8/9 PT/PT-- - -/8/9 PG/PG /9 PG/PG-- - -/9 PG/PG-- - -/9 Part Numbers PG/PG- SO-N-P9 SO-N-P9 SO-N-P8 SO-N-P9 SO-N-P3 Note: When ordering the s, please specify the seal kit number from the table below. List of Seal Kits 3 Seal Kit Numbers KS-PT-3- KS-PT-- KS-PT-- KS-PG-3- KS-PG-- KS-PG PT-3// PG-3// PG/PG- SO-N-P9 SO-N-P9 SO-N-P3 SO-N-P3 SO-N-P Qty. Qty. Pilot Operated heck s Pilot Operated heck s 9
Flow Control (and Check) Valves FG FCG -01/02/03/06/10. Specifications / Model Number Designation / Others. Min. Metred Flow Capacity
low Control (and Check) Valves -//3/6/ Mounting Specifications / Model Number esignation / Others Specifications Max. Metred low Capacity () Min. Metred low Capacity () Max. Operating Pressure () Approx.
More informationPressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations
VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................
More information005 SERIES MODULAR VALVES. Pub. EC-1401. General Information Up to 25 MPa (3630 PSI), 10 L /m in (2.6 U.S.GPM) Modular Valve Type
5 SERIES General Information Up to 5 Ma (3 SI), 1 L /m in (6 USGM) ub EC-11 MODULR VLVES hese modular valves have the same mounting surface as those for the DSG-5 solenoid operated directional valves and
More informationVickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
More informationCheck Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits
Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot
More informationPressure Relief. Pressure Relief Valves. Vickers
Vickers Pressure Relief Pressure Relief Valves Remote Controls, Relief and Sequence Valves, and Single and Multiple Pressure Solenoid and Air Operated Relief Valves 511./EN/1297/A Introduction Remote Controls
More informationE4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
More informationPressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits.
Vickers Pressure Relief Pressure Relief and Sequence Valves CG2V-6/8, 1 Series; CG5V-6/8, 2 Series Typical Section CG2V-6*W-1 relief valve Basic Characteristics Maximum pressure.......... 35 bar (5 psi)
More informationKDG3V-5/7/8, 10 Series
Vickers roportional Valves KDG3V-5/7/8, 1 Series Single-Stage with Hydraulic ilot Operation High Flow roportional Directional Control Valves asic Characteristics Max. pressure.......... up to 35 bar (5
More informationSCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More information"A" Series Variable Displacement Piston Pumps Single Pump, "OBE" Type Electro-Hydraulic Proportional Pressure & Flow Control Type
Single Pump, "OBE" Type Electro-Hydraulic Proportional & Flow Type Input Signal for Safety valve Input Signal for Flow Amplifier Proportional Solenoid Sensor Valve Piston (S Input Voltage L) Performance
More informationPressure Relief Valves SPV, SPVF
Pressure Relief Valves SPV, SPVF Construction of the Pressure Relief Valves SPV, SPVF Symbol Description The direct spring, sliding piston Pressure Relief Valve SPV/SPVF is intended for inline mounting
More informationCheck Valves Valve locator
Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationPressure relief valves Size 6
Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationDXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
More information2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
More informationRPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
More informationPILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and wk Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
More information03 SERIES MODULAR VALVES
3 SERIES General Information Mounting Surface : ISO 44-C--4-, CETO-, N-DO Up to Ma (363 SI), 7 L /min (8. U.S.GM) ub. EC-43 MODULR VLVES The modular valves are functional elements with which a hydraulic
More information2-way flow control valve Type 2FRM 6
RE /0.0 Replaces:.0 -way flow control valve Type FRM Nominal size Series X Maximum operating pressure bar ) Maximum flow L/min ) When used in conjunction with a rectifier plate up to 0 bar H//D /97 + H//D
More informationPressure reducing valve, direct operated, Type ZDR 6 D
RE 26 57/2.3 Replaces:.2 Pressure reducing valve, direct operated, ype ZDR 6 D Nominal size 6 Series 4X aximum operating pressure 2 bar aximum flow 5 L/min K 4279/ ype ZDR 6 DP2 4X/ Y Overview of contents
More informationProportional Pressure Reducing Valves
Proportional Pressure Reducing Valves Technical Catalog KBX(C)G-6-1* KBX(C)G-8-1* Contents General Description Page 3 Typical Section Page 3 Functional Symbols Page 4 Model Codes Page 5 Operating Data
More informationCartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
More informationManapak Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM
Introduction Manapak valves provide a variety of check, flow control, pressure relief and pressure reducing functions in a compact NFPA D03, D05 and D08 sandwich style valve. The NFPA D03 valve body conforms
More informationWater Separator. Main Line Filter. Mist Separator. Micro Mist Separator 150C 250C 350C 450C AMG 550C 2C 4C 8C 11C AFF 22C 37B 75B 150C 250C 350C 450C
Water droplet removal Water Separator Water droplet separation rate: % Model Flow capacity l/min (ANR) Max. flow capacity at 0.7 MPa inlet pressure 300 750 1,500 AMG 2,0 AMG to AMG/ Large dust particle
More informationVariable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
More informationSpecifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
More informationThe SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron.
D e s c r i p t i o n 500 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron. A major feature of these
More informationVickers PVM Piston Pumps
Vickers PVM Piston Pumps 18-141cc 3 (1.1-8.6in 3 ) M-Series Industrial Variable Displacement M-Series Mobile Variable Displacement Table of Contents M Series Variable Displacement Piston Pumps Principles
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...
More information2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference
More informationReusable contamination basket prevents loss of retained contaminants into the reservoir during element replacement.
APPLICATION RETURN LINE FILTERS Series RF & RFD Pressures to 36 PSI Flows to 3 GPM HYDAC RF and RFD In-Tank Return Line Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
More informationPUMP AND MOTOR DIVISION
INSTALLATION MANUAL SERIES P2 and P3 MOBILE PISTON PUMP 1 Check model code / compare with your paper work Nameplate of the pump Ordering / Sales Acknowledgement 2 Check rotation of the pump Clockwise rotation
More informationPOWER PULSE VALVES remote pilot threaded or Quick Mount connection 3/4 to 1 1/2
POWR PULS VLVS pilot threaded or Quick Mount 3/4 to 1 1/2 N 2/2 Series 353 TURS The piston cartridge pulse valves are especially designed for dust collector service applications, combining high flow, long
More informationFittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
More informationSystemStak. SystemStak Valves. Vickers
Vickers SystemStak SystemStak Valves ISO 4401-05 size, 315 bar (40 psi) and 120 l/min (32 USgpm) maximum ratings ressure relief and reducing, sequence, counterbalance, and flow control functions Revised
More informationCOUNTERBALANCE VALVES
COUNTERBALANCE VALVES Introduction They are modulating valves which allow free flow into the actuator and then block the reverse flow until they feel a pilot pressure inversely proportional to the load
More informationSafety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...
More informationHydraulic Flow Control Valves
Webtec Products Limited Hydraulic Flow Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. ILFC Series Fixed Flow Pressure Compensated Control Valve 1 VFC Series
More informationFlow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
More informationAIR OPERATED OIL PUMPS AND KITS
PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationDT Series. Features FLOW. DT-MFMO Male Flare 37 JIC Inlet to Male O-Ring Boss Outlet. DT-MSMO Male Seal-Lok Inlet to Male O-Ring Boss Outlet
Check s Parker Check s Offer the eatures of a Compact, and up to 5 psi Maximum Operating Pressure. The check valves utilize the de pend able, internal design features found in Parker check valves, but
More informationNew. absolute filter elements independently tested in the following Institutes: MPH-MPI 02050/7.99/USA 2 COVER INSERT
e s c r i p t i o n MPH and MPI series filters are designed for returnline applications and provide various installation applications. The filters are installed semiimmersed or totally immersed into a
More informationReturn line filters. Return line filters
Return line filters Return line filters Index Technical data - 5 Filters series 6 Filters series --3 8 ccessories Spare parts Uni-ardan Italia S.p.. reserves the right to make technical changes to the
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More informationTable of Contents. M Series Variable Displacement Piston Pumps
Table of Contents M Series Variable Displacement Piston Pumps Introduction.... 3 Hydraulic System Design Calculations.... 4 Model Code Selection.... 5 Model Code Options.... 6 Specifications and Performance...
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
More informationFRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
More informationProportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F040-1/E Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 AGMZO are two stage poppet type proportional
More informationSolenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working
More informationSafety for Hydraulics Leak free check valve, pilot operated, series ERV Cartridge type, two stage
Safety for Hydraulics Leak free check valve, pilot operated, series Cartridge type, two stage prevents a load from falling if a burst occurs in feed pipe hardened seat and poppet prevents creep of hydraulically
More informationOUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
More informationP2/P3 Series Piston Pumps Variable Displacement zp09. Catalog HY28-2662-CD/US
P2/P3 Series Piston Pumps Variable Displacement zp9 Catalog HY28-2662-CD/US A3 Series P2/P3 A4 General Information General Information Series P2/P3 P2 Series The newly developed variable displacement piston
More information15/40/80CN Series Medium Pressure Filters
1/4/8CN Series Medium Pressure Filters Max 32 l/min - 7 bar Global Filtration Technology 1/4/8CN Series TYPICAL APPLICATIONS Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard)
More informationUM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
More informationFree Floating Lever Drain Traps For Loads to 50,000 lb/hr (22,679 kg/hr)...pressures to 1,000 psig (69 bar)
Free Floating ever rain Traps For oads to 50,000 lb/hr (22,679 kg/hr)...pressures to 1,000 psig (69 bar) iquid rainers Table -14. Maximum Operating Pressures for Handling ifferent Specific Gravity iquids
More informationFluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationVickers Vane Pumps Single and Double Vane Pumps. Model Series V10, V20, V2010, and V2020 for Industrial Equipment
Vickers Vane Pumps Single and Double Vane Pumps Model Series V10, V20, V2010, and V2020 for Industrial Equipment The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power
More informationElectro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure
More informationDirectional Controls
Vickers Directional Controls DG5S-8 and DG5S-H8 wo-stage, Solenoid Controlled, ilot Operated, Four-Way Directional Valves Revised 11/94 591 Introduction General Description he DG5S-8 and DG5S-H8 are two-stage
More informationVHO/VQ Single, Double & Triple Vane Pumps
VHO/VQ Single, Double & Triple Vane Pumps Series Available: 20, 25, 30, 35, 45, 50 For Mobile and Industrial Use Cartridge Kits Available for All Sizes Same Day Shipments www.fluidynefp.com Our People
More information3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
More informationPRE3G 81 250/212 ED PILOT OPERATED PRESSURE CONTROL VALVE WITH PROPORTIONAL CONTROL AND INTEGRATED ELECTRONICS. Q max 40 l/min SERIES 12
81 250/212 ED PRE3G PILOT OPERATED PRESSURE CONTROL VALVE WITH PROPORTIONAL CONTROL AND INTEGRATED ELECTRONICS SUBPLATE MOUNTING ISO 4401-03 (CETOP 03) p max 350 bar Q max 40 l/min MOUNTING SURFACE OPERATING
More informationPrecision Regulator. Series IR1000/2000/3000 ARJ AMR ARM ARP IR IRV VEX1 SRH SRP SRF ARX20 VCHR ITV IC PVQ VER VEA VY2 AP100.
Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.
More informationProportional Pressure Relief Valves
Proportional Pressure Relief Valves echnical Catalog KBCG-6-1* KBCG-8-1* Contents General Description Page 3 ypical Section Page 3 Functional Symbol Page 4 Model Codes Page 5 Operating Data Page 6 Performance
More informationVickers. Piston Pumps
Vickers Piston Pumps xial Piston Pumps Fixed and Variable Displacement PF, PF, PF PV /6, PV /, PV /9, PV and PV 9 to SE PV /6, PV /, PV /9 to DIN/ISO 39, Part G-379 Contents asic characteristicts..........................................................................................3
More informationLine rupture protection valves type LB
Line rupture protection valves type LB Pressure p max Flow rate Q A max = 500 bar = 4... 160 lpm Screw-in versions Type LB...C In-line versions Type LB...G Type LB...F 1. General Line rupture protection
More informationShut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
More informationSolenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SF-2C-115A-35 S-1AY-12D-35 SD-2C-12D-35 Features High Flow/ High Pressure: Up to 40 gpm / 5000 psi working pressure*.
More informationUM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
More information2 & 5-Wire Overfill Sensors
2 & 5-Wire Overfill Sensors Optic overfill sensors detect the presence of liquid at a preset level. The new Civacon Universal 2 & 5-Wire Sensor is fully compatible with all our current Sensors and Monitors,
More information4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
More informationEco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
More informationSeries PAVC Variable Displacement Piston Pumps zp01. Catalog HY28-2662-CD/US
Series PAVC Variable Displacement Piston Pumps zp1 Catalog HY28-2662-CD/US 1 Introduction Series PAVC Quick Reference Data Chart Pump Model Displacement CM 3 /REV (IN 3 /REV) Pump Delivery *Approx. Noise
More informationStandard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
More informationQ Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications
Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Technical Catalog PVQ10 PVQ13 PVQ20 PVQ25 PVQ32 PVQ40 PVQ45 Table of Contents Introduction......................................................................................................
More informationMHT. Pressure Filters HIGH PRESSURE INLINE FILTER
MHT Pressure Filters HIGH PEUE INLINE FILTE Pressure Filters MHT MHT 4 MPa ( bar) Port sizes: / / Flow rates: 0 l/min TEHNIAL DATA Max. working pressure: 4 MPa ( bar) Max. testing pressure: 6 MPa (60 bar)
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More informationhttp://www.daikinpmc.com/en/ For latest information, PDF catalogs and operation manuals Features MPa {kgf/cm 2 } 100 17.5 {175}
Solenoid Valve Features 2 For DC power supply 3 For C power supply These models realize high-pressure large-flow-rate control at 35 MPa {35 kgf/cm 2 } and 1 L/min (2) or 16 L/min (3). They are best suited
More informationVickers. Valves. CM2, CM11, RM3 & FM3 Control Valves. For Mobile Equipment. Revised 4/96
Vickers Valves CM2, CM11, RM3 & FM3 Control Valves For Mobile Equipment Revised 4/96 33 Introduction The directional valves described in this booklet are more than just directional valves -- they are hydraulic
More informationValve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
More informationTHE SIMPLEX HAND PUMP
INTRODUTION HND PUMPS THE SIMPLEX HND PUMP Pivoting linkage reduces wear for longer pump life. djustable pivot for the absolute lowest handle effort. Large bronze piston for more speed and durability.
More informationRated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1
200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More information3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
More informationSOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
More informationCatalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI KSWA3... SW-3... Ball sert Type...9./2.... 42/6... 3 K2A... 3Z... Poppet sert Type...38/1... 3/... 4 CS41B... C4-3...
More informationHow To Order A Direct Flow Air Cleaner
Reduced Volume - Improved Performance - Flexible Packaging The patented Direct Flow technology provides the flexibility to optimize the air system performance to size ratio, meeting the demands of today
More informationSteering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
More information