USE AND CARE GUIDE ACORN SOLAR POST CAP LIGHT 2 PACK

Transcription

1 Item # USE ND CRE GUIDE CORN SOLR POST CP LIGHT PCK Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m.-5 p.m., Central, Monday-Friday HD-HMPTON HMPTONBY.COM THNK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this solar post light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

2 Table of Contents Table of Contents Safety Information Warranty What is Covered Pre-Installation Package Contents ssembly Operation Troubleshooting FQ Safety Information Do not dispose of lithium phosphate batteries in municipal waste stream or by fire as batteries may explode. Do not open, short circuit, or mutilate batteries. Dispose of batteries in accordance with Local, State, and Federal regulations. Contains no toxic metals. Do not mix old and new batteries. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium or Nickel Metal Hydride) batteries with Lithium Iron Phosphate (lithium phosphate) batteries. Warranty WHT IS COVERED The manufacturer warrants this fixture to be free from defects in materials and workmanship when installed and used under normal operating conditions for a period of 1 year from the date of purchase. This warranty covers all component parts and extends only to the replacement of a defective fixture or components; it does not cover failure due to improper installation, misuse, mishandling, or damage incurred in transit. Contact the Customer Service Team at HD-HMPTON or visit Pre-Installation TOOLS REQUIRED Phillips screwdriver HRDWRE INCLUDED BB CC Part Description Short Screws Quantity 4 BB Long Screws 4 CC Plastic nchors 4

3 Pre-Installation (continued) PCKGE CONTENTS B C D E Part B C Description Light Head Lens Shade Quantity D Post Mount E Rail Mount dapter 3 HMPTONBY.COM Please contact HD-HMPTON for further assistance.

4 ssembly 1 ssembling the light lign the tabs on the lens (B) with the ledges on the light head () and turn the light head () clockwise until tabs are secure under ledges. lign the tabs on the shade (C) with the ledges on the light head () and turn the light head () clockwise until tabs are secure under ledges. Mounting on a post Firmly slide the light assembly (, B and C) on top of the post mount (D) until it is flush. ttach the light and post mount assembly (, B, C and D) to the selected post by aligning the post with the opening in the bottom of the post mount (D). Set the light onto the post. NOTE: Some parts may come pre-assembled. NOTE: Light head should fit on a common 4 x 4 inch post. ctual post measurement: 3-5/8 x 3-5/8 in. Use a pen or pencil to trace the two holes located on the sides of the post mount (D) onto the post. Remove the light assembly. Pre-drill pilot holes onto the post where your pen/pencil marks were made. Slide the light and post mount assembly (, B, C and D) onto the post. Insert the screws (). Tighten until secure. C D 4

5 ssembly (continued) 3 Mounting to a rail lign the rail mount adapter (E) onto the selected rail. Use a pen or pencil to trace the two holes onto the rail and remove the rail mount adapter (E). Pre-drill pilot holes onto the rail where your pen/pencil marks were made. Insert plastic anchors (CC). Insert screws (BB) through the rail mount adapter (E) and the pilot holes in the rail. Tighten until secure. Firmly slide the light and post mount assembly (, B, C and D) on top of the rail mount adapter (E) until it is flush. Insert screws () through the holes on the sides of the post mount (D) and rail mount adapter (E). Tighten until secure. D BB CC E NOTE: If post is wooden, you will not need to insert plastic anchors. Operation 1 First time use Replacing the battery Remove the light head () from the shade (C). Remove the pull tab (1) in between the battery and its connector. The solar light needs to charge in full sunlight for 8-1 hours to allow the rechargeable battery to reach maximum capacity. For optimum performance, allow the battery to charge in full sunlight. Remove the light head () from the shade (C). Remove the lens (B) from the light head (). Press the release tab. Pull up and remove the battery cover (F). Remove the old battery and replace with a new lithium phosphate 3.V, 600 (14500) mh rechargeable battery. Return the battery cover (F). Return the lens (B) to the light head (). Return the light head () to the shade (C). 1 B F 5 HMPTONBY.COM Please contact HD-HMPTON for further assistance.

6 Troubleshooting Problem The light does not come on. Possible Cause There is plastic over the solar cell. The pull tab was not removed. The batteries are dirty. The batteries are dead. Solution Make sure there is no plastic over the solar cell. Make sure that the pull tab is removed. Remove batteries, wipe both ends with a clean dry cloth, and replace batteries. Test batteries by replacing with alkaline batteries and placing the light in a dark room. DO NOT leave the alkaline batteries in the light. Replace with new batteries if needed. FQ What type of maintenance should I perform on the lights? lthough it is not mandatory, some people choose to periodically clean their lights. This can be done with a nonabrasive soap, sponge and water. You may also need to replace the batteries. Will I need to / can I replace the LED in my solar light? The solar lights have LEDs (Light Emitting Diodes) because of their long lifetime and low power consumption. The LED is not replaceable. How long will my batteries / lights last? Lithium batteries should last for 1500 daily cycles and the LED bulbs should last 0 years. 6

7 Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m.-5 p.m., Central, Monday-Friday HD-HMPTON HMPTONBY.COM Retain this manual for future use.