Product family data sheet

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Product family data sheet"

Transcription

1 Cree XLamp XT-E LEDs Product family data sheet CLD-DS41 Rev 1A Product Description XLamp XT-E is Cree s highest performing silicon carbide-based LED technology, delivered in Cree s industry-standard XP/XT packaging. XT-E White sets the new standard for high performance and dramatically lowers system cost. XT-E Royal Blue is Cree s highest performing source of royal blue light for remote-phosphor applications. Cree XLamp LEDs bring high performance and quality of light to a wide range of lighting applications, including remotephosphor, color-changing, portable and personal, outdoor, indoordirectional, transportation, stage and studio, commercial and emergency-vehicle lighting. FEATURES Available in white, 80-CRI min white, 70-min CRI white and royal blue Binned at 85 C Cool white efficacy of up to 148 lm/w 85 C, 350 ma) Royal Blue wall plug efficiency of up to 53% 85 C, 350 ma) Wide viewing angle: Thermal resistance: 5 C/W Maximum drive current: 1.5 A Electrically neutral thermal path Vf binning supported for XT-E White and Royal Blue XT-E Royal Blue sorted into 2.5-nm-wavelength bins Unlimited floor life at 30 ºC/85% RH TABLE OF CONTENTS Product Characteristics... 2 Flux Characteristics... 2 Relative Spectral Power Distribution... 4 Relative Flux vs. Junction Temperature... 5 Electrical Characteristics... 6 Relative Flux vs. Current... 6 Relative Chromaticity vs. Temperature and Current... 8 Typical Spatial Distribution... 9 Thermal Design...10 Reflow-Soldering Characteristics..10 Notes...11 Mechanical Dimensions...12 Tape and Reel...13 Packaging Reflow solderable - JEDEC J-STD-020C Compatible RoHS- and REACH-compliant NOTE: For remote phosphor applications, a separate license to certain Cree patents is required. Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Cree, the Cree logo and XLamp are registered trademarks Cree, Inc Silicon Cree, Drive Inc. Durham, 4600 Silicon NC Drive USA Tel: Durham, NC USA Tel:

2 Product Characteristics Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point C/W 5 Viewing angle (FWHM) - white degrees 115 Viewing angle (FWHM) - royal blue degrees 140 Temperature coefficient of voltage mv/ C -2.5 ESD classification (HBM per Mil-Std-883D) Class 2 DC forward current ma 1500 Reverse voltage V 5 Forward voltage 350 ma, 85 C) V LED junction temperature C 150 Flux Characteristics - White (T J = 85 C) The following table provides several base order codes for XLamp XT-E White LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XT-E Binning and Labeling document. Color CCT Range Base Order Codes Minimum Luminous 350 ma (lm) Calculated Minimum Luminous Flux (lm)* Order Code Min. Max. Group Flux (lm) 700 ma 1500 ma R XTEAWT H51 Cool White 5,000 K 8,300 K R XTEAWT G51 R XTEAWT F51 R XTEAWT HE3 Outdoor White 4,000 K 6,200 K R XTEAWT GE3 R XTEAWT FE3 R XTEAWT LFE4 Neutral White 3,700 K 5,000 K R XTEAWT LEE4 70 CRI Minimum Neutral White 3,700 K 5,000 K Q XTEAWT LDE4 R XTEAWT BFF5 R XTEAWT BEF5 Q XTEAWT BDF5 Notes: Cree maintains a tolerance of ±7% on flux and power measurements and ±2 on CRI measurements. Typical CRI for Neutral White, 3700 K K CCT is 75. Typical CRI for Warm White, 2600 K K CCT is 80. Calculated flux values are for reference only 2

3 Color CCT Range Base Order Codes Minimum Luminous 350 ma (lm) Calculated Minimum Luminous Flux (lm)* Order Code Min. Max. Group Flux (lm) 700 ma 1500 ma 80 CRI Minimum White 2,600 K 4,300 K Q XTEAWT HDE7 Q XTEAWT HCE7 Q XTEAWT HBE7 Q XTEAWT LDE7 Warm White 2,600 K 3,700 K Q XTEAWT LCE7 70 CRI Minimum Warm White 2,600 K 3,700 K Q XTEAWT LBE7 R XTEAWT BEE7 Q XTEAWT BDE7 Q XTEAWT BCE7 Notes: Cree maintains a tolerance of ±7% on flux and power measurements and ±2 on CRI measurements. Typical CRI for Neutral White, 3700 K K CCT is 75. Typical CRI for Warm White, 2600 K K CCT is 80. Calculated flux values are for reference only flux characteristics - Royal Blue (T J = 85 C) The following table provides order codes for XLamp XT-E Royal Blue LEDs. Additional information on the performance grouping and codes for XT-E Royal Blue LEDs can be found in the XT-E Binning and Labeling document. DWL Kit Codes Dominant Wavelength Range Min. Max. DWL (nm) DWL (nm) Order Codes, Minimum Radiant 350 ma, T j =85 C 475 mw 500 mw 525 mw 550 mw 01 D D XTEARY K01 XTEARY L01 XTEARY M01 XTEARY N01 02 D D XTEARY K02 XTEARY L02 XTEARY M02 XTEARY N02 03 D D XTEARY K03 XTEARY L03 XTEARY M03 XTEARY N03 04 D D XTEARY K04 XTEARY L04 XTEARY M04 XTEARY N04 05 D D XTEARY K05 XTEARY L05 XTEARY M05 XTEARY N05 06 D D XTEARY K06 XTEARY L06 XTEARY M06 XTEARY N06 07 D D XTEARY K07 XTEARY L07 XTEARY M07 XTEARY N07 08 D D XTEARY K08 XTEARY L08 XTEARY M08 XTEARY N08 09 D D XTEARY K09 XTEARY L09 XTEARY M09 XTEARY N09 Note: Cree maintains a tolerance of ±7% on flux and power measurements 3

4 Relative spectral power distribution - White 100 Relative Radiant Power (%) K K CCT 2600K K CCT Wavelength (nm) Relative spectral power distribution - Royal Blue 100% Relative Radiant Power (%) 80% 60% 40% 20% Royal Blue 0% Wavelength (nm) 4

5 Relative Luminous Flux vs. Junction Temperature (I F = 350 ma) - White 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% Junction Temperature (ºC) Relative Radiant Flux vs. Junction Temperature (I F = 350 ma) - Royal Blue 120% Relative Radiant Flux 100% 80% 60% 40% 20% 0% Junction Temperature (ºC) 5

6 Electrical Characteristics (T J = 85 C) Forward Current (ma) Forward Voltage (V) Relative Luminous Flux vs. Current (T J = 85 C) - White 350% Relative Luminous Flux (%) 300% 250% 200% 150% 100% 50% 0% Forward Current (ma) 6

7 Relative Radiant Flux vs. Current (T J = 85 C) - Royal Blue 350% Relative Radiant Flux (%) 300% 250% 200% 150% 100% 50% 0% Forward Current (ma) 7

8 RELATIVE CHROMATICITY VS. CURRENT AND TEMPERATURE (WARM White) T J = 85 C ΔCCx ΔCCy Current (ma) I F = 350 ma ΔCCx ΔCCy Tsp ( C) 8

9 Typical Spatial Distribution - White 120 Relative Luminous Intensity (%) Angle (º) Typical Spatial Distribution - Royal Blue 120 Relative Luminous Intensity (%) Angle (º) 9

10 Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics Maximum Current (ma) Rj-a = 10 C/W Rj-a = 15 C/W Rj-a = 20 C/W Rj-a = 25 C/W Ambient Temperature (ºC) Reflow Soldering Characteristics In testing, Cree has found XLamp XT-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. T P Ramp-up t P Critical Zone T L to T P Temperature T L Ts max Ts min ts Preheat t S Ramp-down 25 t 25 C to Peak Time 10

11 Profile Feature Lead-Based Solder Lead-Free Solder Average Ramp-Up Rate (Ts max to Tp) 3 C/second max. 3 C/second max. Preheat: Temperature Min (Ts min ) 100 C 150 C Preheat: Temperature Max (Ts max ) 150 C 200 C Preheat: Time (ts min to ts max ) seconds seconds Time Maintained Above: Temperature (T L ) 183 C 217 C Time Maintained Above: Time (t L ) seconds seconds Peak/Classification Temperature (Tp) 215 C 260 C Time Within 5 C of Actual Peak Temperature (tp) seconds seconds Ramp-Down Rate 6 C/second max. 6 C/second max Time 25 C to Peak Temperature 6 minutes max. 8 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Notes Lumen Maintenance Projections Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity In testing, Cree has found XLamp XT-E LEDs to have unlimited floor life in conditions 30 ºC/85% relative humidity (RH). Moisture testing included a 168-hour soak at 85 ºC/85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree also recommends returning any unused LEDS to the resealable moisture-barrier bag and closing the bag immediately fter use. RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, Vision Advisory Claim WARNING: Do not look at exposed lamp in operation. Eye injury can result. See LED Eye Safety at products/pdf/xlamp_eyesafety.pdf. 11

12 Mechanical Dimensions All measurements are ±.13 mm unless otherwise indicated R Top View Side View Bottom View Recommended PCB Solder Pad Recommended Stencil Pattern (Shaded Area Is Open) 12

13 DRAWN BY CHECK APPROVED MATERIAL FINAL PROTECTIVE FINISH TITLE SIZE SCALE DRAWING NO. SHEET DRAWN BY CHECK APPROVED MATERIAL FINAL PROTECTIVE FINISH OF REV. TITLE SIZE SCALE DRAWING NO. SHEET OF REV. DRAWN BY CHECK APPROVED MATERIAL FINAL PROTECTIVE FINISH T SI SC xlamp XT-E LEDs Tape and Reel All Cree carrier tapes conform 2.00 [.079] 1.50 to EIA-481D, Automated Component [ ]Do Handling P2 Systems Standard. All dimensions 6 in mm. 5 D NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. D 2.00 [.079] P [.157] C Po 6 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. P [.157] Po [ ]Do 1.75 [.069] E1 3 4 D NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION REVISONS CONTAINED WITHIN ARE THE PROPRIETARY AND REV DESCRIPTION BY APP'D CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 2 REVISONS REV DESCRIPTION BY APP'D 5.50 [.217]F C 1.75 [.069] E [.404] E [.079] 4.00 [.157] Po [.472] NOMINAL [.484] MAX W 1 D 4.39 [.173] [ ]Do 3.78 [.149] Bo 5.50 [.217]F D C 1.75 [.069] E [.404] E2 REV [.472] NOMINAL [.484] MAX W 2 DESCRIPT 4.39 [.173] C B END 4.39 [.173] B A 1.5± [.149] Ao 4.39 [.173] 8.00 [.315] P Ko User Feed -.00[ Direction-.0000] 4±.1 UNLESS OTHERWISE SPECIFIED 7.3 DIMENSIONS ARE IN 8±.1 MILLIMETERS AND AFTER FINISH ±.1 TOLERANCE UNLESS SPECIFIED: CATHODE SIDE START.XX ±.25 ±.10.XXX ±.125 ANODE SIDE 8.00 [.315] P 5.50 [.217]F 1.50 [.059] 3.78 [.149] D1 Ao [.404] E [.059] D [.472] NOMINAL [.484] MAX W B 7.3 A 4.39 [.173] Ao mm [.149"] Bo mm [.149"] Ko mm [.094"] 3.78 [.149] Bo [.173] Ko -.00[ ] 3.78 [.149].30 [.012] Ao T [.315] P C.30 [.012] T POCKET SIZE Ao mm [.149"] Bo mm [.149"] Ko mm [.094"] UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN D. CRONIN MILLIMETERS AND AFTER FINISH. B TOLERANCE UNLESS SPECIFIED: D. CRONIN 05/02/ Silicon Drive.XX ±.25 Durham, N.C XXX ±.125 Phone (919) X ±.5 THIRD ANGLE PROJECTION Fax (919) FOR SHEET METAL PARTS ONLY A.X ± 1.5 POCKET SIZE X ±.5.XX ±.75 THIRD ANGLE PROJECTION CARRIER TAPE XP HEW.XXX ±.25 FOR SHEET METAL PARTS ONLY X ±.5.X ± 1.5.XX ±.75 SURFACE FINISH: XXX ±.25 5 C X ±.5 A SURFACE FINISH: 1.6 DRAWING SCALE 1 / [.059] D Ko -.00[ ] B POCK Ao m Bo m Ko m 05/02/11 D A Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) Loaded Pockets (1000 Lamps) THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS Leader ARE IN MILLIMETERS AND AFTER FINISH. 400mm TOLERANCE UNLESS (min.) SPECIFIED: of.xx ±.25 empty pockets.xxx ±.125 with X ±.5 FOR at SHEET least METAL 100mm PARTS ONLY.X ± 1.5 sealed.xx ± by.75tape.xxx ±.25 (50 empty X pockets ±.5 min.) D. CRONIN 05/02/11 C Silicon Drive Durham, N.C Phone (919) Fax (919) CARRIER TAPE XP HEW SURFACE FINISH: 1.6 DRAWING SCALE 1 / 1 A A MEASURED AT HUB MEASURED AT HUB 1.9±.4 21± ± MEASURED AT EDGE

14 Packaging Vacuum-Sealed Moisture Vacuum-Sealed Barrier Bag Moisture Barrier Bag CREE Label Bin with CodeCree Bin & Code, Barcode Qty, Label Lot # Label with with Customer Cree Bin Code, P/N, Qty, Qty, Lot #, Lot PO ## Patent Label Label with Customer Order Code, Qty, Reel ID, PO# Label with Cree Bin Code, Qty, Lot # 14

Cree XLamp XP-G LEDs Data Sheet

Cree XLamp XP-G LEDs Data Sheet Cree XLamp XP-G LEDs Data Sheet The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Cree s history of innovation in LEDs for

More information

Cree XLamp XR-E LED. Table of Contents. CLD-DS05 Rev 16B. Product family data sheet

Cree XLamp XR-E LED. Table of Contents. CLD-DS05 Rev 16B. Product family data sheet Cree XLamp XR-E LED Product family data sheet CLD-DS05 Rev 16B Product Description The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented lighting-class brightness, efficacy,

More information

Cree XLamp MT-G EasyWhite LEDs

Cree XLamp MT-G EasyWhite LEDs ree XLamp MT-G EasyWhite LEDs PRODUT FAMILY DATA SHEET/ BINNING AND LABELING DOUMENT LD-DS36 REV 0 WWW.REE.OM/XLAMP PRODUT DESRIPTION The XLamp MT-G EasyWhite LED maximizes lumen density, eliminates chromaticity

More information

N35L-U High Power LED

N35L-U High Power LED N35L-U High Power LED Introduction The N35L-U LED from SemiLEDs brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, N35L-U

More information

Cree XLamp XT-E High-Voltage White LEDs

Cree XLamp XT-E High-Voltage White LEDs Cree XLamp XT-E High-Voltage White LEDs Product family data sheet CLD-DS43 REV 11A Product Description The Cree XLamp XT-E High Voltage White (HVW) LED provides the lighting class performance and reliability

More information

Cree XLamp XP-G2 LEDs

Cree XLamp XP-G2 LEDs Product family data sheet L-S51 Rev 11 ree XLamp XP-G2 LEs Product escription The XLamp XP-G2 LE builds on the unprecedented performance of the original XP-G by increasing lumen output up to 20% while

More information

Edixeon S White Series Datasheet

Edixeon S White Series Datasheet Edixeon S White Series Datasheet Edixeon Series Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright

More information

Edixeon S5 White Series Datasheet

Edixeon S5 White Series Datasheet Edixeon S5 White Series Datasheet Edixeon Series Features : Various colors for choice Low voltage operation Instant light Long operating life Reflow process compatible Copyright 2013 Edison Opto Corporation.

More information

Cree 5-mm Round LED C503C-WAS/WAN

Cree 5-mm Round LED C503C-WAS/WAN Cree 5-mm Round LED PRODUCT FAMILY DATA SHEET CLD-CT1098.008 PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely

More information

LUXEON S. High Flux Density

LUXEON S. High Flux Density LUXEON S Optimized solution for applications requiring high flux and tight beam control Technical Datasheet DS80 LUXEON S High Flux Density Introduction The LUXEON S emitters deliver uniform beam intensity

More information

1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA

1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA 1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat

More information

5W HI-POWER LED SPECIFICATION

5W HI-POWER LED SPECIFICATION 5W HI-POWER LED SPECIFICATION HPG8b-495xWHCx Drawn by Checked by Approved by RoHS Conformity DATE:2013/4/9 REV:A HUEY JANN High Power 5W LED is made of GaInN chips with precise package technique which

More information

Product family data sheet

Product family data sheet ree XLamp XM-L LEs Product family data sheet L-S Rev 8 Product escription FETURES Table of ontents WWW.REE.OM/XLMP The XLamp XM-L LE is the Maximum drive current: industry s highest performance, 000 m

More information

Maximum drive current: 3000 ma. Low thermal resistance: 2.5 C/W. Maximum junction temperature: 150 C. Viewing angle: 125

Maximum drive current: 3000 ma. Low thermal resistance: 2.5 C/W. Maximum junction temperature: 150 C. Viewing angle: 125 ree XLamp XM-L LEs PROUT FMILY T SHEET L-S REV WWW.REE.OM/XLMP PROUT ESRIPTION The XLamp XM-L LE is the industry s highest performance, singledie white lighting-class LE. XLamp XM-L is 0% more efficient

More information

Discontinued. LUXEON V Portable. power light source. Introduction

Discontinued. LUXEON V Portable. power light source. Introduction Preliminary Technical Datasheet DS40 power light source LUXEON V Portable Introduction LUXEON is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability

More information

MP-1919 XNOVA Cube TM SMD LED

MP-1919 XNOVA Cube TM SMD LED MP-1919 XNOVA Cube TM SMD LED Features: Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Binning.... 5 Chromaticity Diagram.... 6 Characteristic

More information

Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18

Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18 Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG

More information

C1919 15W COB Series

C1919 15W COB Series High Performance LED Module SemiLEDs C1919 15W COB is a high performance LED module with high thermal conductivity and reliability for demanding lighting applications. It is an easy to assemble light source

More information

C4246 120W COB Series

C4246 120W COB Series High Performance LED Module SemiLEDs C4246 120W COB is a high performance LED module with high thermal conductivity and reliability for demanding lighting applications. It is an easy to assemble light

More information

SPECIFICATIONS FOR APPROVAL

SPECIFICATIONS FOR APPROVAL CUSTOMER :. DATE : 2010. 12. 16. SPECIFICATIONS FOR APPROVAL PRODUCT NAME : Top View Type White SMD LED MODEL NAME : LEMWS59T80LZ00 APPROVAL REMARK APPENDIX Designed Checked Approved LG Innotek Co., Ltd.

More information

Cree XLamp Long-Term Lumen Maintenance

Cree XLamp Long-Term Lumen Maintenance Cree XLamp Long-Term Lumen Maintenance July 29 This application note outlines Cree s long-term testing methodology and provides Cree s guidance on mean L 7 lifetimes for XLamp XR-E LED lamps in a wide

More information

3mm Photodiode,T-1 PD204-6C/L3

3mm Photodiode,T-1 PD204-6C/L3 3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high

More information

HL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions

HL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions RoHS Specification Client Name: Client P/N: Factory P/N: HL-A-3528H308W-S1-13 OF-SMD3528WN Sending Date: Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation 殷 小 平 王

More information

EVERLIGHT ELECTRONICS CO.,LTD.

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED with Bi-Color (Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow

More information

50W EdiStar. Approved By Customer. Designer Checker Approval. Ultra High Power LED

50W EdiStar. Approved By Customer. Designer Checker Approval. Ultra High Power LED Ultra High Power LED 50W EdiStar EdiStar Emitter Approved By Customer Designer Checker Approval Date:2006/12/04 Version:Preliminary V0.1 4F, No. 800, Chung-Cheng Rd, Chung-Ho, Taipei 235, Taiwan Tel: 886-2-8227-6996

More information

Antenna Part Number: FR05-S1-R-0-105

Antenna Part Number: FR05-S1-R-0-105 Fractus EZConnect Zigbee, RFID, ISM868/9 Chip Antenna Antenna Part Number: FR5-S1-R--15 This product is protected by at least the following patents PAT. US 7,148,85, US 7,22,822 and other domestic and

More information

Technical Data Sheet 2.0*5.0mm Rectangle Type LED Lamps

Technical Data Sheet 2.0*5.0mm Rectangle Type LED Lamps Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Descriptions : The series is specially

More information

SLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant

SLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....

More information

Cree XLamp XM-L LED 10,000-Lumen High-Bay Reference Design

Cree XLamp XM-L LED 10,000-Lumen High-Bay Reference Design application note Cree XLamp XM-L LED 10,000-Lumen High-Bay Reference Design CLD-AP96 rev 0A Table of Contents Introduction... 1 Design approach/objectives... 2 The 6-step methodology... 2 1. Define lighting

More information

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic

More information

Technical Data Sheet 3.0mm Round Type LED Lamps

Technical Data Sheet 3.0mm Round Type LED Lamps Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free Descriptions : The series is specially designed for applications requiring higher brightness The led

More information

Description YD/T 950. YD/T 993 YD/T 1082 GR 1089 Inter-building GR 1089 Intra-building IEC 61000-4-2 V V DRM. @250V/µs I H

Description YD/T 950. YD/T 993 YD/T 1082 GR 1089 Inter-building GR 1089 Intra-building IEC 61000-4-2 V V DRM. @250V/µs I H SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.

More information

Harvatek Surface Mount CHIP LED Data Sheet HT-380FCH-ZZZZ

Harvatek Surface Mount CHIP LED Data Sheet HT-380FCH-ZZZZ Harvatek Surface Mount CHIP LED Data Sheet Official Product HT Part No. Customer Part No. Data Sheet No. Tentative Product **************** **************** May. 14, 2007 Version of 1.1 Page 1/15 DISCLAIMER...

More information

Harvatek Surface Mount LED Data Sheet. HT-F195 Series

Harvatek Surface Mount LED Data Sheet. HT-F195 Series Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Jul. 15, 2005 Version of 1.4 Page 1/20 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:

More information

Handling, soldering & mounting instructions

Handling, soldering & mounting instructions Tri-axial acceleration sensor SMB380 SMB380 Order code 0 273 141 006 Package type QFN Release version 1.0 Release date 2007-07-23 Notes Rev. 1.0 Specifications are Page subject 1 to change without notice

More information

GaAs/GaAlAs IR Emitting Diodes in ø 5 mm Package

GaAs/GaAlAs IR Emitting Diodes in ø 5 mm Package GaAs/GaAlAs IR Emitting Diodes in ø 5 mm Package Description TSIL64 is a high efficiency infrared emitting diode in GaAlAs on GaAs technology, molded in clear, bluegrey tinted plastic packages. In comparison

More information

Harvatek Surface Mount LED Data Sheet HT-T167 Ultra-bright Reverse Gullwing Series

Harvatek Surface Mount LED Data Sheet HT-T167 Ultra-bright Reverse Gullwing Series Harvatek Surface Mount LED Data Sheet HT-T167 Ultra-bright Reverse Gullwing Series Jul. 21, 2005 Version of 1.1 Page 1/22 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 LABEL SPECIFICATIONS...5 PRODUCT CHARACTERISTICS...10

More information

Fortimo LED SLM Gen4

Fortimo LED SLM Gen4 Fortimo LED SLM Gen4 Fortimo LED SLM Food L19 The Fortimo LED SLM Gen4 is a next generation solution for spotlight and mini-downlight applications. It is a product in line with the Fortimo brand promise

More information

30W Epistar 45mil Chip High Power LED

30W Epistar 45mil Chip High Power LED 30W Epistar 45mil Chip High Power LED White:LEDE-P30-DH-White Warm White:LEDE-P30-DWH Features Long operating life Highest Luminous flux Wide range of colours:2500k-25000k Chip size: Epistar 45*45mil More

More information

and cathode, allowing them to be driven individually, this increasing flexibility in electrical layout.

and cathode, allowing them to be driven individually, this increasing flexibility in electrical layout. ACULED VHL Standard White, Monochromatic and Multi-Colored Four-Chip LED Products DESIGN YOUR OWN! Custom DYO product line also available B R O C H U R E Scale 1:1 = 13 mm The ACULED VHL (Very High Lumen)

More information

PART NO.: L-C150SRCT REV: A / 4

PART NO.: L-C150SRCT REV: A / 4 PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: para@para.com.tw http://www.para.com.tw DATA SHEET

More information

SPECIFICATION. Topview 5550 SMD LED IWS 505-RB. Product : Topview 5550 SMD LED Part No : IWS-505-RB Customer : Date : 2007. 11. 10 Ver.1.0.

SPECIFICATION. Topview 5550 SMD LED IWS 505-RB. Product : Topview 5550 SMD LED Part No : IWS-505-RB Customer : Date : 2007. 11. 10 Ver.1.0. SPECIFICATION Product : Topview 555 SMD LED Part No : Customer : Date : 27.. Ver.. Customer : Approval Manufacturer : ITSWELL Co., LTD Proposed By Approval Comment Suwon Company : 442-9, 82 Uman Industrial

More information

Figure 1. Figure 1: XM-L high-bay prototypes (left: no optic design, right: Carclo Bubble optic)

Figure 1. Figure 1: XM-L high-bay prototypes (left: no optic design, right: Carclo Bubble optic) Cree XLamp XM-L LED High-Bay Reference Design Figure 1 Application Note CLD-AP69 rev 0E Figure 1: XM-L high-bay prototypes (left: no optic design, right: Carclo Bubble optic) Table of Contents Introduction...1

More information

B Recommended land pattern: [mm] SSt. SSt 2014-07-15 2014-05-12. SSt. SSt. SSt 2014-01-07. SSt 2013-11-19. SSt. SBa. SSt 2013-04-24.

B Recommended land pattern: [mm] SSt. SSt 2014-07-15 2014-05-12. SSt. SSt. SSt 2014-01-07. SSt 2013-11-19. SSt. SBa. SSt 2013-04-24. A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 1 khz/ 100 mv L 2x 51 µh ±30% Impedance Z max 5500 Ω typ. Rated current

More information

NBB-402. RoHS Compliant & Pb-Free Product. Typical Applications

NBB-402. RoHS Compliant & Pb-Free Product. Typical Applications Typical Applications Narrow and Broadband Commercial and Military Radio Designs Linear and Saturated Amplifiers 0 RoHS Compliant & Pb-Free Product NBB-402 CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO

More information

Pulse Proof Thick Film Chip Resistors

Pulse Proof Thick Film Chip Resistors Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

DSC1001. Low-Power Precision CMOS Oscillator 1.8~3.3V. Features. General Description. Benefits. Block Diagram

DSC1001. Low-Power Precision CMOS Oscillator 1.8~3.3V. Features. General Description. Benefits. Block Diagram DSC.8~.V LowPower Precision CMOS Oscillator General Description The DSC is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages

More information

DATA SHEET PART NO. : L-314YD REV : A / 4

DATA SHEET PART NO. : L-314YD REV : A / 4 PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: para@para.com.tw http://www.para.com.tw DATA SHEET

More information

High Performance Schottky Rectifier, 1 A

High Performance Schottky Rectifier, 1 A High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die

More information

Application Note AN-0994 Maximizing the Effectiveness of your SMD Assemblies

Application Note AN-0994 Maximizing the Effectiveness of your SMD Assemblies Application Note AN-0994 Maximizing the Effectiveness of your SMD Assemblies Table of Contents Page Method...2 Thermal characteristics of SMDs...2 Adhesives...4 Solder pastes...4 Reflow profiles...4 Rework...6

More information

High / Low Bay Datasheet

High / Low Bay Datasheet Solid-State Lighting Series High / Low Bay Datasheet High / Low Bay lighting is typically used in industrial applications. They have the same features as high bay lighting but with a different sized enclosed

More information

120W High Bay II Datasheet

120W High Bay II Datasheet 120W High Bay II Datasheet Solid-State Lighting Series Features : Solid State Lighting Technology Superior Light Quality Reduce CO₂ Emission Energy Saving(120W) Ecologically Friendly Long Life-Time IP65

More information

Surface Mount Schottky Barrier

Surface Mount Schottky Barrier FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive

More information

L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description

L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition

More information

Photolink- Fiber Optic Receiver PLR135/T1

Photolink- Fiber Optic Receiver PLR135/T1 Features High PD sensitivity optimized for red light Data : NRZ signal Low power consumption for extended battery life Built-in threshold control for improved noise Margin The product itself will remain

More information

Pulsed Over Current Driving of Cree XLamp LEDs: Information and Cautions

Pulsed Over Current Driving of Cree XLamp LEDs: Information and Cautions Pulsed Over Current Driving of Cree XLamp LEDs: Information and Cautions Application Note CLD-AP6 rev 1B Table of contents Introduction...1 Single pulse over current events...2 Repetitive pulsing...3 Ripple

More information

Reflective Optical Sensor with Transistor Output

Reflective Optical Sensor with Transistor Output Reflective Optical Sensor with Transistor Output CNY7 Description The CNY7 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package which blocks visible light. E

More information

Wurth Electronics Midcom Policy Statement on RoHS Compliance And Lead-Free Products

Wurth Electronics Midcom Policy Statement on RoHS Compliance And Lead-Free Products Wurth Electronics Midcom Policy Statement on RoHS Compliance And Lead-Free Products General Environmental Policy Wurth Electronics Midcom is committed to the manufacture of environmentally-friendly products

More information

RoHS-Compliant Through-Hole VI Chip Soldering Recommendations

RoHS-Compliant Through-Hole VI Chip Soldering Recommendations APPLICATION NOTE AN:017 RoHS-Compliant Through-Hole VI Chip Soldering Recommendations Ankur Patel Associate Product Line Engineer Contents Page Introduction 1 Wave Soldering 1 Hand Soldering 4 Pin/Lead

More information

High / Low Bay Datasheet

High / Low Bay Datasheet Solid-State Lighting Series High / Low Bay Datasheet High / Low Bay lighting is typically used in industrial applications. They have the same features as high LED4 solution of light in low/high ceiling

More information

No. STSE-CW2163B <Cat.No.031110> SPECIFICATIONS FOR NICHIA WHITE LED MODEL : NSPW315BS NICHIA CORPORATION -0-

No. STSE-CW2163B <Cat.No.031110> SPECIFICATIONS FOR NICHIA WHITE LED MODEL : NSPW315BS NICHIA CORPORATION -0- No. STSE-CW2163B SPECIFICATIONS FOR NICHIA WHITE LED MODEL : NSPW315BS -0- 1.SPECIFICATIONS (1) Absolute Maximum Ratings (Ta=25 C) Item Symbol Absolute Maximum Rating Unit Forward Current IF 30 ma Pulse

More information

High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC

High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC Rev. 8 18 November 2010 Product data sheet 1. Product profile 1.1 General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table 1. Product overview Type number Package

More information

Solder Reflow Guide for Surface Mount Devices

Solder Reflow Guide for Surface Mount Devices June 2015 Introduction Technical Note TN1076 This technical note provides general guidelines for a solder reflow and rework process for Lattice surface mount products. The data used in this document is

More information

NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features

NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices

More information

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single

More information

Photo Modules for PCM Remote Control Systems

Photo Modules for PCM Remote Control Systems Photo Modules for PCM Remote Control Systems Available types for different carrier frequencies Type fo Type fo TSOP183 3 khz TSOP1833 33 khz TSOP1836 36 khz TSOP1837 36.7 khz TSOP1838 38 khz TSOP184 4

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,

More information

High / Low Bay Datasheet

High / Low Bay Datasheet Solid-State Lighting Series High / Low Bay Datasheet High / Low Bay lighting is typically used in industrial applications. They have the same features as high Opteon solution of light in low/high ceiling

More information

Low / High Bay Datasheet

Low / High Bay Datasheet Solid-State Lighting Series Low / High Bay Datasheet Low/high bay lighting is typically used in industrial applications. They have the same features as high bay lighting but with a different sized enclosed

More information

Reel pack, SMD, 7" Q1/T1-Q2/T3 standard product orientation Orderable part number ending,115 or X Ordering code (12NC) ending 115.

Reel pack, SMD, 7 Q1/T1-Q2/T3 standard product orientation Orderable part number ending,115 or X Ordering code (12NC) ending 115. Rev. 1 18 February 2015 Packing information 1. Packing method Printed plano box Barcode label Reel Tape QA Seal Preprinted ESD warning Circular sprocket holes opposite the label side of reel PQ-label (permanent)

More information

LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description

LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal

More information

1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES

1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal

More information

IRLR8729PbF IRLU8729PbF

IRLR8729PbF IRLU8729PbF Applications l High Frequency Synchronous Buck Converters for Computer Processor Power l High Frequency Isolated DC-DC Converters with Synchronous Rectification for Telecom and Industrial Use Benefits

More information

AAT4280 Slew Rate Controlled Load Switch

AAT4280 Slew Rate Controlled Load Switch General Description Features SmartSwitch The AAT4280 SmartSwitch is a P-channel MOSFET power switch designed for high-side load switching applications. The P-channel MOSFET device has a typical R DS(ON)

More information

Reflective Optical Sensor with Transistor Output

Reflective Optical Sensor with Transistor Output Reflective Optical Sensor with Transistor Output Description The CNY7 has a compact construction where the emitting light source and the detector are arranged in the same direction to sense the presence

More information

EVERSPIN s New 2mm Exposed Pad DFN Package Meets Both SOIC-8 and DFN8 PCB Layouts

EVERSPIN s New 2mm Exposed Pad DFN Package Meets Both SOIC-8 and DFN8 PCB Layouts EVERSPIN s New 2mm Exposed Pad DFN Package Meets Both SOIC-8 and DFN8 PCB Layouts This Application Note is to inform Everspin customers that a new, DFN8 package with a 2mm bottom exposed pad has been added

More information

Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX

Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX Ultra Linear Low Noise Monolithic Amplifier 50Ω The Big Deal 0.05 to 4 GHz Ultra High IP3 Broadband High Dynamic Range without external Matching Components May be used as a replacement for RFMD SPF-5189Z

More information

The Latest in LED Lighting Test Methods and Standards. Jianzhong Jiao, Ph.D. OSRAM Opto Semiconductors Inc.

The Latest in LED Lighting Test Methods and Standards. Jianzhong Jiao, Ph.D. OSRAM Opto Semiconductors Inc. The Latest in LED Lighting Test Methods and Standards Jianzhong Jiao, Ph.D. OSRAM Opto Semiconductors Inc. EPA Energy Star Products Partner Meeting Oct. 22, 2012 2 Outline Introduction Updates for LED

More information

NBB-300 Cascadable Broadband GaAs MMIC Amplifier DC to 12GHz

NBB-300 Cascadable Broadband GaAs MMIC Amplifier DC to 12GHz Cascadable Broadband GaAs MMIC Amplifier DC to 12GHz NBB-300 The NBB-300 cascadable broadband InGaP/GaAs MMIC amplifier is a low-cost, high-performance solution for general purpose RF and microwave amplification

More information

WCAP-CSGP Ceramic Capacitors

WCAP-CSGP Ceramic Capacitors A Dimensions: [mm] B Recommended land pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1±0.2 Vrms, 1 khz ±10% C 15000 pf ± 10% Rated voltage Dissipation factor

More information

Product Specification

Product Specification Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should

More information

1 POLE - 5A SLIM POWER RELAY

1 POLE - 5A SLIM POWER RELAY POWER RELAY POLE - A SLIM POWER RELAY FTR-MY Series RoHS compliant FEATURES Width mm, height mm,(% smaller than NY series) area mm, super slim, low power, compact and light weight.gr. Nominal power: mw

More information

WE-FAMI THT Power Inductor

WE-FAMI THT Power Inductor A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 100 khz/ 1 V L 22 µh ±20% Rated current T = 40 K I R 4.1 A max. Saturation

More information

Spezifikation für Freigabe / specification for release

Spezifikation für Freigabe / specification for release Artikelnummer / part number : 82550350 Datum / Date : 31.07.06 description : 0805 SMD VARISTOR Lead Free SMD size: 0805 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SIZE W L T a 0402 0.5

More information

A Guide to the Specification of LED Lighting Products 2012

A Guide to the Specification of LED Lighting Products 2012 October 2012 A Guide to the Specification of LED Lighting Products 2012 This Guide has been produced under the umbrella of the Lighting Industry Liaison Group and is endorsed by its member organisations:

More information

SPECIFICATION FOR APPROVAL. Approved by

SPECIFICATION FOR APPROVAL. Approved by C O N F I D E N T I A L D O C U M E N T SPECIFICATION FOR APPROVAL CONRAD Description : Royalohm Part no.: 0402WGxxxxxTCE (RMC 1/16W (0402) +/- 1%, 5% & Jumper) 0603SAxxxxxT5E (RMC 1/10W-S (0603) +/- 1%,

More information

Y.LIN ELECTRONICS CO.,LTD.

Y.LIN ELECTRONICS CO.,LTD. Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact

More information

PHOTOTRANSISTOR OPTOCOUPLERS

PHOTOTRANSISTOR OPTOCOUPLERS MCT2 MCT2E MCT20 MCT27 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor

More information

LM78XX Series Voltage Regulators

LM78XX Series Voltage Regulators LM78XX Series Voltage Regulators General Description Connection Diagrams The LM78XX series of three terminal regulators is available with several fixed output voltages making them useful in a wide range

More information

iw1697 Product Brief Low-Power Off-Line Digital Green-Mode PWM Controller Description Applications

iw1697 Product Brief Low-Power Off-Line Digital Green-Mode PWM Controller Description Applications .0 Features Primary-side feedback eliminates opto-isolators and simplifi es design No-load power consumption < 0 mw at 0 V with ac typical application circuit ( star rating) Active start-up scheme enables

More information

1999 Invented the power LED 2002 First 100+ lumen LED 2003 First high CRI, low CCT LED 2009 First power LED specified at 100 lumens per watt (LUXEON

1999 Invented the power LED 2002 First 100+ lumen LED 2003 First high CRI, low CCT LED 2009 First power LED specified at 100 lumens per watt (LUXEON 1999 Invented the power LED 2002 First 100+ lumen LED 2003 First high CRI, low CCT LED 2009 First power LED specified at 100 lumens per watt (LUXEON Rebel ES) 2010 (4 aug) 1000 000 000 LUXEON LED ( Light

More information

DDSL01. Secondary protection for DSL lines. Features. Description

DDSL01. Secondary protection for DSL lines. Features. Description Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description

More information

DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards

DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards -xxxsc5 Secondary protection for DSL lines Features Low capacitance devices: -xxxsc5: Delta C typ = 3.5 pf High surge capability: 30 A - 8/20 µs Voltage: 8 V, 10.5 V, 16 V, and 24 V RoHS package Benefits

More information

STPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features

STPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features Bulletin PD-20622 rev. B 0/06 STPS40L5CW SCHOTTKY RECTIFIER 2 x 20 Amps I F(AV) = 40Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 40 A waveform V RRM 5

More information

17 IMPLEMENTATION OF LEAD-FREE SOLDERING TECHNOLOGY. Eva Kotrčová České Vysoké Učení Technické Fakulta Elektrotechnická Katedra Elektrotechnologie

17 IMPLEMENTATION OF LEAD-FREE SOLDERING TECHNOLOGY. Eva Kotrčová České Vysoké Učení Technické Fakulta Elektrotechnická Katedra Elektrotechnologie 17 IMPLEMENTATION OF LEAD-FREE SOLDERING TECHNOLOGY Eva Kotrčová České Vysoké Učení Technické Fakulta Elektrotechnická Katedra Elektrotechnologie 1. Introduction Lead is the toxic heavy metal which is

More information

TYPICAL APPLICATION CIRCUIT. ORDER INFORMATION SOP-EP 8 pin A703EFT (Lead Free) A703EGT (Green)

TYPICAL APPLICATION CIRCUIT. ORDER INFORMATION SOP-EP 8 pin A703EFT (Lead Free) A703EGT (Green) www.addmtek.com 2 CHANNELS 150mA HIGH VOLTAGE ADJUSTABLE CURRENT REGULATOR DESCRIPTION A703 is a high voltage, adjustable constant current driver for LED applications. Two regulated current ports are designed

More information

www.aokledlight.com AOK i Series LED High Bay / Flood / Tunnel Light

www.aokledlight.com AOK i Series LED High Bay / Flood / Tunnel Light www.aokledlight.com AOK i Series LED High Bay / Flood / Tunnel Light Overview Simplistic and charming design, less is more Can be used as high bay light, flood light or tunnel light Suitable for indoor

More information

Series AMLDL-Z Up to 1000mA LED Driver

Series AMLDL-Z Up to 1000mA LED Driver FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC

More information

Outside Plant Precision Cooling Site Monitoring and Services

Outside Plant Precision Cooling Site Monitoring and Services Emerson Network Power Connectivity Solutions Johnson 299 Johnson Avenue Waseca, MN 56093 USA Tel: 800.247.8256 Fax: 507.833.6287 www.emersonnetworkpower.com/connectivity About Emerson Network Power Connectivity

More information

Last Time Buy. Deadline for receipt of LAST TIME BUY orders: April 30, 2011

Last Time Buy. Deadline for receipt of LAST TIME BUY orders: April 30, 2011 Last Time Buy This part is in production but has been determined to be LAST TIME BUY. This classification indicates that the product is obsolete and notice has been given. Sale of this device is currently

More information