Plasson USA 6020 Osborn Street Houston, TX

Size: px
Start display at page:

Download "Plasson USA 6020 Osborn Street Houston, TX"

Transcription

1 Plasson USA 6020 Osborn Street Houston, TX

2 PLASSON USA HAS GROWN INTO ONE OF THE LEADING SUPPLIERS OF POLYETHYLENE PIPE AND FABRICATIONS. All fabrications are manufactured in-house by skilled technicians to the same stringent quality standards as spirally wound pipe. Spirolite manholes can be produced in a wide variety of configurations to meet your specific systems requirements. 2

3 PIPE Spirolite is the leading technology in large diameter thermoplastic pipes that offers a flexible, leak free, cost-efficient, lightweight, weather and corrosion-resistant pipes that can function under a wide temperature range and are designed for easy assembly. Spirolite is the preferred replacement for the traditional materials used for sewers (concrete), since it is more resistant to corrosion. A unique manufacturing process makes Spirolite the only high-density polyethylene system in North America that offers a cost competitive alternative to traditional piping systems for gravity, sanitary sewer, water transmission and industrial waste applications, reline, odor control, and flume lining. Lightweight Spirolite pipe offers both the ease of a bell and spigot joint design that reduces installation time and the corrosion resistance to assure long-term, trouble-free service. Spirolite pipe also meets the requirements of ASTM F-894. SIZE RANGE PROFILE WALL CONCEPT Unlike many conventionally extruded thermoplastic pipes, where inside diameter is decreased as the wall is made thicker, all Spirolite pipe is manufactured to constant internal diameters. Standard Spirolite sizes are available from 18 to 120. Additional sizes through 144 diameter are available on request. Spirolite is manufactured through an exclusive process by which a profile extrusion is continuously wound upon a mandrel. This innovative wall construction takes advantage of geometrically efficient profiles to minimize pipe weight while maximizing the stiffness to weight ratio. Each size of Spirolite pipe is available in several standard classes, allowing the engineer to choose the profile or class which is the most economical for their specific application. The Spirolite pipe profile concept has been proven by more than 35 years of successful experience in the western hemisphere. Many contractors have found they can install 25% - 35% more Spirolite pipe per day than a similar size pipe made from traditional materials. FEATURES Spirolite s Lightweight pipe offers the ease of long length, bell and spigot joint design, exceeding ASTM D-3212, that reduces installation time and the corrosion resistance of polyethylene to assure long-term trouble free service. Spirolite pipe meets the requirements of ASTM F-894. Spirolite is manufactured from a HDPE designed for engineered piping applications. The resin selected for Spirolite offers the optimum combination of strength, stiffness, toughness and long-term reliability. INDUSTRIAL MINING WATER LANDFILLS 3

4 BURIED MANHOLES, FITTINGS, STRUCTURES, AND TANKS Spirolite buried manholes, fittings, tanks, and structures can be produced in a wide variety of configurations to meet your specific system requirements. All fabrications are manufactured in-house by skilled technicians to the same stringent quality standards as Spirolite Pipe. SPIROLITE S FEATURES INCLUDE: Larger Riser and Stub Out Diameter Range High Quality Stress Rated Resin with No Filler or Post- Consumer Resins Chemical and Corrosion Resistant Impact Resistant, Tough and Durable Long Service Life Leak Tight Light Weight One-Piece Construction Easy to Install Variety of Popular Joining Methods Every Order Made to Your Specifications SPIROLITE OPTIONS Single and Dual Wall Configurations Riser Sizes Up to 120 in Diameter Stub and Lateral Sizes from 1/2 to 120 Diameter Joining Options: Gasketed Bell and Spigot Joints/Gasketed Field Closures/Plain Ends/Flange Adapters and Steel Backup Rings Base Configurations: Through Pipe with Benching at Springline or Crown that may also Include Angle Points/Flat Bottoms/Internally or Externally Gusseted Bottoms for Groundwater Conditions Anti-Flotation Anchor Connections Top Configuration Options: Open Tops/Flat Tops/Gusseted Flat Tops H-20 Loading Considerations Manways Fiberglass Ladders Internal Piping Pump Mounting Considerations Guide Rail/Dissimilar Piping/Grate Mounting Brackets for 3rd Party Appurtenances Lifting Lugs INDUSTRIAL MINING WATER LANDFILLS 4

5 SPIROLITE BURIED MANHOLES, FITTINGS, STRUCTURES, AND TANKS APPLICATIONS MUNICIPAL INDUSTRIAL LANDFILL Spirolite fabrications are not affected by hydrogen sulfide and sewer gases. Tight joints in conjunction with Spirolite piping significantly inhibit infiltration and exfiltration reducing treatment costs and the possibility of soil contamination. One-piece design with through pipe, benching and bends built-in offer smooth, uninterrupted flow characteristics and quick troublefree installation. Flat tops and stubout closure joints that allow for field adjustment make it easy to meet stationing and grade requirements. Process water and plant effluent lines can be managed with confidence using Spirolite manholes, tanks and structures. High quality, corrosion resistant materials provide superior service life. Spirolite Fabrications are manufactured to your specifications, ensuring that the structure we provide meets your needs. The industry standard for cell liners and leachate collection piping, manholes manufactured from HDPE provide seamless compatibility from leachate collection to treatment. Spirolite landfill manholes, structures and tanks for collection, transport and storage of leachate and methane gas are manufactured to meet your specific system requirements. Sanitary Sewer Manholes Monitoring Manholes Single and Dual Containment Leachate Collection Manholes Storm Drains Cleanout Manholes Gas Collection /Condensate Manholes Diversion and Junction Structures Access and Valve Structures Sumps and Pump Stations Pump Stations Gas Condensate Manholes Wetwells/Catch Basins Drop Manholes Sumps and Wetwells Single Wall Leachate Collection/ Containment Tanks Manhole Tees Dual Containment Structures Dual Containment Leachate Custom HDPE Fittings Custom HDPE Fittings Custom HDPE Fittings Liners for Rehabilitation Chemical Storage Tanks Collection/Containment Tanks BURIED HORIZONTAL TANKS Spirolite detention and storage tanks are available for storm water, leachate sewage and industrial solutions. Potentially hazardous liquids can be stored with confidence in Spirolite tanks ranging from 10,000 to 80,000 gallons and above. Custom tanks incorporating the advantages of HDPE are leak free, chemically resistant, light weight, durable and easily modified to meet future requirements. Inherent corrosion resistance ensures long service life without costly cathodic protection systems, liners or coatings. 5

6 ABOVE GRADE TANKS, FITTINGS AND STRUCTURES Spirolite above grade tanks, fittings and structures can be produced in a wide variety of configurations to meet your specific system requirements. All fabrications are manufactured in-house by skilled technicians to the same stringent quality standards as Spirolite Pipe. SPIROLITE S FEATURES INCLUDE: Larger Riser and Stub Out Diameter Range High Quality Stress Rated Resin with No Filler or Post-Consumer Resins Chemical and Corrosion Resistant Impact Resistant, Tough and Durable Long Service Life Leak Tight Light Weight One-Piece Construction Easy to Install Variety of Popular Joining Methods Every Order Made to Your Specifications SPIROLITE OPTIONS Single and Dual Wall Configurations Riser Sizes Up to 120 in Diameter Stub and Lateral Sizes from 1/2 to 120 Diameter Stub Out Joining Options: Plain Ends or Flange Adapters with Backup Rings Top Configuration Options: Open Tops/Flat Tops/Gusseted Flat Tops Manways Fiberglass Ladders Internal Piping Guide Rail/Dissimilar Piping/Grate Mounting Brackets for 3rd Party Appurtenances Lifting Lugs AGRICULTURE BEVERAGE CHEMICAL COSMETIC DRUG INDUSTRIAL MEAT PACKING METALLURGICAL MINING MUNICIPAL PETROLEUM PHARMACEUTICALS PICKLING PLATING PULP AND PAPER TEXTILE TRANSPORTATION WASTE TREATMENT 6

7 SPIROLITE ABOVE GRADE TANKS, FITTINGS AND STRUCTURES BENEFITS Manufactured using the unique Spirolite production process using bimodal high density PE4710/PE100 resin, Spirolite tanks offer the perfect combination of extra high strength and affordability. Corrosion Resistance - Spirolite HDPE is resistant to most industrial chemicals at ambient temperatures Durable containing 2% carbon black, Spirolite HDPE tanks are fully-resistant to ultraviolet (UV) degradation. The never need painting, and are resistant to abrasion and exterior corrosion. Lightweight Spirolite HDPE requires less material-handling capacity than metals and concrete structures of equal size. Flat bottoms and strong, weight-carrying tops are fully welded to heavy wall shells. Manways and nozzles are installed per customer requirements. Spirolite HDPE tanks are available either vertical or horizontal up to 120 inside diameter Spirolite HDPE is hydrophobic with excellent non-stick properties making tanks and structures easy to clean Applications include storage of finished products, water treatment chemicals, water, fertilizer, corrosive industrial chemicals, and waste fluids. Hydrocarbon content should not exceed 2% concentration. CHEMICAL AND CORROSION RESISTANT Most chemicals which attack other products will not harm Spirolite tanks. They resist over 700 chemicals in various combinations and concentrations, and under different temperature conditions. Only certain solvents, aromatic hydrocarbons, phenolics, chlorinated hydrocarbons, fats, and some oils have any effect on these tanks. Spirolite tanks will not rust or decay and they are not subject to electrolytic or galvanic corrosion. LONG LASTING AND MAINTENANCE FREE Harsh environmental conditions and the degrading effects of ultraviolet rays will not affect Spirolite tanks. They are built to last. They will not rot or discolor and require no painting. TOUGH AND STRONG Rugged Spirolite tanks are made from high-density, high-molecular weight polyethylene (HDPE) using a resin tailored to produce tanks that are tough, strong, and reliable. Spirolite tanks are manufactured using an exclusive process by which a specially designed extrusion is continuously wound upon a mandrel. Heat fusion techniques create homogeneous bonds that are permanent, reliable, and completely leak proof. Spirolite tanks are practically shatterproof. VARIETY OF FITTINGS AND ACCESSORIES A wide variety of fittings and accessories including flanged inlets and outlets, vents, valves, sight glasses, and float gauges are available with Spirolite tanks. Custom equipped interiors may also be provided on special order. RANGE OF SIZES Standard Spirolite tanks are offered in a range of capacities from 315 to 10,000 gallons. Non-standard sizes are available on special order. EASILY CLEANED Smooth, non-wetting surfaces minimize the possibility of substances adhering to the interior of Spirolite tanks. It s easy to clean them and easy to change contents. And because they can be refilled quickly, fewer storage tanks are needed. Fewer tanks and efficient utilization saves you money. NON-TOXIC AND NON-ABSORBENT These tanks will not contaminate their contents nor will the contents react with the tank. They are practically free from taste or odor and will not promote algae or bacterial growth. They also have good flavor retention and barrier properties. ABRASION RESISTANT In many applications, Spirolite tanks are 4 to 6 times more abrasion resistant than steel. This product is suited for handling slurry solutions that require agitation. LIGHT WEIGHT Spirolite tanks are significantly lighter than tanks made of traditional materials. Their light makes them easier to install. Spirolite tanks require no expensive structural alterations or special handling equipment. Light weight also means reduced shipping and transportation costs. 7

8 6020 Osborn Street Houston, TX

Native InDesign 2890 SaniTite Brochure 1/8" 100 300 CMYK April 17, 07

Native InDesign 2890 SaniTite Brochure 1/8 100 300 CMYK April 17, 07 Sanitary Sewer Pipe Tough pipe for a tough environment SaniTite Sanitary Sewer Pipe delivers the features that engineers, contractors and municipalities demand durability, performance, handling, toughness

More information

The Most Advanced Name in Drainage Systems. Sanitary Sewer Pipe

The Most Advanced Name in Drainage Systems. Sanitary Sewer Pipe The Most Advanced Name in Drainage Systems Sanitary Sewer Pipe SaniTite Sanitary Sewer Pipe delivers the features that engineers, contractors and municipalities demand durability, performance, handling,

More information

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials

More information

HDPE Structures. Your Single Source... > Manholes > KO Pots > Sumps > Tanks > Valve Boxes > Pump Stations. Coming through. Version 2.

HDPE Structures. Your Single Source... > Manholes > KO Pots > Sumps > Tanks > Valve Boxes > Pump Stations. Coming through. Version 2. Your Single Source... HDPE Structures > Manholes > KO Pots > Sumps > Tanks > Valve Boxes > Pump Stations Coming through. Version 2.0 2 INTRODUCTION Table of Contents Applications Sanitary Systems.....................3

More information

Use of Corrugated HDPE Products

Use of Corrugated HDPE Products Chapter 3 Use of Corrugated HDPE Products Orin Bennett USE OF CORRUGATED HDPE PRODUCTS Corrugated HDPE Pipe Characteristics High-density polyethylene (HDPE) is a versatile material and has some ideal characteristics

More information

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel

More information

HYDROMATIC COMPLETE SOLUTIONS. for Wastewater Management

HYDROMATIC COMPLETE SOLUTIONS. for Wastewater Management HYDROMATIC COMPLETE SOLUTIONS for Wastewater Management WWW.HYDROMATIC.COM HYDROMATIC We Offer Complete Wastewater Solutions Hydromatic has been a leader in the wastewater industry since 1959. By applying

More information

MODEL TO OPTIMIZE THE DESIGN OF FIBERGLASS REINFORCED PLASTIC IN CHLORINE DIOXIDE SERVICE

MODEL TO OPTIMIZE THE DESIGN OF FIBERGLASS REINFORCED PLASTIC IN CHLORINE DIOXIDE SERVICE MODEL TO OPTIMIZE THE DESIGN OF FIBERGLASS REINFORCED PLASTIC IN CHLORINE DIOXIDE SERVICE Geoffrey E. Clarkson, P.Eng.,, FEC UTComp Inc. Cambridge, Ontario, Canada g.clarkson@utcomp.ca ABSTRACT Fiberglass

More information

PLASTIC PIPE SELECTION GUIDE

PLASTIC PIPE SELECTION GUIDE PLASTIC PIPE SELECTION GUIDE Bulletin No. PA-1 May, 2016 In order to recommend the proper type of Cresline Plastic Pipe, you need to know three things: 1. What fluid? 2. At what pressure? 3. At what temperature?

More information

Complete Solutions for Wastewater Management

Complete Solutions for Wastewater Management Complete Solutions for Wastewater Management We Offer Complete Wastewater Solutions Hydromatic has been a leader in the wastewater industry since 1959. By applying our strong ingenuity and work ethic we

More information

Gasketed Sewer Pipe. Storm and Sanitary pipe for use with STI Gasketed Sewer Fittings.

Gasketed Sewer Pipe. Storm and Sanitary pipe for use with STI Gasketed Sewer Fittings. Gasketed Sewer Pipe Storm and Sanitary pipe for use with STI Gasketed Sewer Fittings. Gasketed Sewer Pipe Installation Royal Municipal Solutions Gasketed Sewer Pipe weighs a fraction of the weight of traditional

More information

DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT. Jim Riley, Texas A&M University February 10, 2015

DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT. Jim Riley, Texas A&M University February 10, 2015 DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT Jim Riley, Texas A&M University February 10, 2015 Piping at Texas A&M 2 History of Distribution Piping at Texas A&M Concrete reinforced

More information

Commercial Tanks and Reservoirs. Overview 7.1. Summary This chapter contains procedures for the valuation of commercial tanks and reservoirs.

Commercial Tanks and Reservoirs. Overview 7.1. Summary This chapter contains procedures for the valuation of commercial tanks and reservoirs. Overview 7.1 Summary This chapter contains procedures for the valuation of commercial tanks and reservoirs. SAMA s 2015 Cost Guide provides directions for the valuation of property by the cost approach;

More information

Introduction CHAPTER 1

Introduction CHAPTER 1 Introduction 5 CHAPTER 1 Introduction Since its discovery in 1933, PE has grown to become one of the world s most widely used and recognized thermoplastic materials.(1) The versatility of this unique plastic

More information

HDPE PIPE. HDPE Pipe Toronto, Edmonton, Saskatoon, Vancouver, Montreal

HDPE PIPE. HDPE Pipe Toronto, Edmonton, Saskatoon, Vancouver, Montreal HDPE PIPE HDPE Pipe Fabco Plastics is the leading Canadian supplier of industrial plastic pipe including HDPE. Our dedicated and knowledgeable sales staff can provide high quality technical information

More information

Water distribution system requirements from local municipalities can be unattainable or prohibitive due to extensive land development.

Water distribution system requirements from local municipalities can be unattainable or prohibitive due to extensive land development. HT-1129 Fire Protection Tanks Durable Reliable Affordable Highland Tank HighDRO Fire Protection Tanks (HD-FPT) are atmospheric water storage tanks specifically designed for use in a residential, commercial,

More information

1-800-654-3872 1-405-273-6302

1-800-654-3872 1-405-273-6302 Anodeless Risers Transition Risers Compression Risers Riser Accessories Transition Risers and Transitions The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com Risers and Transitions:

More information

Fibreglass Underground Water Tanks

Fibreglass Underground Water Tanks GREENTANK Fibreglass Underground Water Tanks GREENTANK Fibreglass Water Tanks Fibreglass Tanks for Long-Term Storage of Water As communities, businesses and industries become increasingly accountable to

More information

Polyethylene Pressure Pipe

Polyethylene Pressure Pipe -25 Pipe Systems dvantages Pipe made from polyethylene is a cost-effective solution to a broad range of piping problems in municipal, industrial, marine, mining, and agricultural applications. It has proven

More information

Town House 11265 Center Highway North Huntingdon, PA 15642

Town House 11265 Center Highway North Huntingdon, PA 15642 APPENDIX C SPECIFICATIONS FOR THE CONSTRUCTION OF BUILDING LATERAL SANITARY SEWERS DECEMBER 2004, INCLUDING AMENDMENTS ADOPTED ON FEBRUARY 6, 2008 AND APRIL 2, 2008; EFFECTIVE ON MAY 1, 2008 Town House

More information

SECTION 710 GUARDRAIL MATERIALS

SECTION 710 GUARDRAIL MATERIALS 710.08 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 SECTION 710 GUARDRAIL MATERIALS 710.01 General. Metal beam

More information

TECHNICAL NOTE Culvert Sliplining and Lining of Casings with HPPipe

TECHNICAL NOTE Culvert Sliplining and Lining of Casings with HPPipe TECHNICAL NOTE Culvert Sliplining and Lining of Casings with HPPipe TN 5.14 February 2010 Introduction It may be at times necessary, in an aging infrastructure, to rehabilitate drainage and sanitary lines

More information

Royal Seal Gasketed Sewer Pipe

Royal Seal Gasketed Sewer Pipe Royal Seal Gasketed Sewer Pipe Royal Seal Gasketed Sewer Pipe Royal Seal gasketed sewer pipe with our specially designed Double Seal Locked-In (DSLI ) gasket is an extremely durable pipe with a leak proof

More information

Module 3 : Sewer Material. Lecture 3 : Sewer Material

Module 3 : Sewer Material. Lecture 3 : Sewer Material 1 P age Module 3 : Sewer Material Lecture 3 : Sewer Material 2 P age 3.1 Important Factors Considered for Selecting Material for Sewer Following factors should be considered before selecting material for

More information

SECTION PRECAST CONCRETE UTILITY STRUCTURES. 1. Trench excavation, backfill, and compaction; Section

SECTION PRECAST CONCRETE UTILITY STRUCTURES. 1. Trench excavation, backfill, and compaction; Section 03400-1 of 8 SECTION 03400 PRECAST CONCRETE UTILITY STRUCTURES 03400.01 GENERAL A. Description Precast concrete utility structures shall include, but not necessarily be limited to, furnishing and installing

More information

MUNICIPALITY OF ANCHORAGE

MUNICIPALITY OF ANCHORAGE MUNICIPALITY OF ANCHORAGE Mayor Dan Sullivan COMMUNITY DEVELOPMENT DEPARTMENT ON-SITE WATER & WASTEWATER PROGRAM 4700 Elmore Road P.O. Box 196650 Anchorage, AK 99519-6650 (907) 343-7904 fax (907) 343-7997

More information

Fabricated Drainage Products

Fabricated Drainage Products Fabricated Drainage Products Complete Drainage System Inline Drains are used At the beginning of a drain line Add a new water inlet to an existing drain line using a riser pipe and tee HARCO Surface Drainage

More information

Wastewater Collection System Supplemental Design Standards for Capital Improvement Program Projects

Wastewater Collection System Supplemental Design Standards for Capital Improvement Program Projects Wastewater Collection System Supplemental Design Standards for Capital Improvement Program Projects March 2013 i Metropolitan Sewer District of Greater Cincinnati Wastewater Collection System Supplemental

More information

SPR PE Steel Reinforced Liner

SPR PE Steel Reinforced Liner ENGINEERED SOLUTIONS SPR PE Steel Reinforced Liner Reline Done Right Contech is your single source for rehabilitation of sanitary & storm sewers, culverts and bridges. Contech Engineered Solutions has

More information

1.02 MATERIAL: A. Metal: Prime furniture steel, free of scales, buckles, or other defects; ASTM A366.

1.02 MATERIAL: A. Metal: Prime furniture steel, free of scales, buckles, or other defects; ASTM A366. 1.01 GENERAL: A. Fume hoods shall be of a "picture frame" airfoil design and construction. Each fume hood superstructure shall provide for safe efficient removal of all fumes, both heavy and light, with

More information

Austin San Antonio Beaumont

Austin San Antonio Beaumont Houston Dallas/Fort Worth Austin San Antonio Beaumont Products Pipe Many companies offer polyethylene pipe, but for over 25 years, this has been Gajeske s core business. Gajeske stocks a full line of polyethylene

More information

Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer

Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer The user may choose to adopt part or all of this Model Specification; however, the user should ensure that all parts

More information

ASME Packaged Indirect Fired Water Heater

ASME Packaged Indirect Fired Water Heater Utilizes Or HTHW To Heat Domestic Water, Semi-Instantaneous or Storage Type Model BW Features Reliable Only high grade materials used in construction to ensure long operating life Hydrastone cement lining

More information

SECTION 300 STORM SEWER AND SUMP PUMP DRAIN SYSTEMS

SECTION 300 STORM SEWER AND SUMP PUMP DRAIN SYSTEMS SECTION 300 STORM SEWER AND SUMP PUMP DRAIN SYSTEMS Section Title Page 301 General................................... 18 302 Materials.................................. 18 303 Design Requirements........................

More information

Plastics Engineering SYSTEM BEKAPLAST. Mechanically anchored thermoplastic lining for extreme conditions

Plastics Engineering SYSTEM BEKAPLAST. Mechanically anchored thermoplastic lining for extreme conditions Plastics Engineering SYSTEM BEKAPLAST Mechanically anchored thermoplastic lining for extreme conditions Beka_Gesamt_en 2014.indd 1 System BEKAPLAST Mechanically anchored lining systems to meet the highest

More information

STRONG FLEXIBLE. HyperPure PURE

STRONG FLEXIBLE. HyperPure PURE STRONG FLEXIBLE PURE TM HyperPure TM HyperPure 1954 HDPE (HIGH DENSITY POLYETHYLENE) TUBE FIRST TESTED 1965 ENGEL PATENT, PEXa 1967 PEXa PRODUCTION FOR POTABLE WATER SYSTEMS BIMODAL POLYETHYLENE RAISED

More information

Oil and Gas Pipeline Design, Maintenance and Repair

Oil and Gas Pipeline Design, Maintenance and Repair Oil and Gas Pipeline Design, Maintenance and Repair Dr. Abdel-Alim Hashem Professor of Petroleum Engineering Mining, Petroleum & Metallurgical Eng. Dept. Faculty of Engineering Cairo University aelsayed@mail.eng.cu.edu.eg

More information

About Smith Tank. Gonzales, LA. 26-Acre facility with rail spur capabilities. 10,000-sq-ft appurtenance fabrication shop

About Smith Tank. Gonzales, LA. 26-Acre facility with rail spur capabilities. 10,000-sq-ft appurtenance fabrication shop List of Services New Tank Construction API 650 & 620 Tank Repair API 653 ASME Pressure Vessel Construction & Repair Shop Built Tanks API 650 & 620 Civil/Mechanical Services About Smith Tank Smith Tank

More information

HDPE. High-Density Polyethylene Pipe Systems. Meeting the challenges of the 21 st century

HDPE. High-Density Polyethylene Pipe Systems. Meeting the challenges of the 21 st century HDPE High-Density Polyethylene Pipe Systems Meeting the challenges of the 21 st century 1 Smooth-wall High-Density Polyethylene pipe systems Meeting the challenges of the 21 st century Piping made from

More information

SECTION 6 SANITARY SEWER MAIN 6.01 SCOPE

SECTION 6 SANITARY SEWER MAIN 6.01 SCOPE 6.01 SCOPE The work covered by this section of the specifications consists of the furnishing of all plant, labor, materials, equipment and supervision and performing all operations involved in the construction

More information

STI Gasketed Sewer Fittings SDR 35 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36

STI Gasketed Sewer Fittings SDR 35 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36 STI Gasketed Sewer Fittings SDR 35 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36 G STI fittings feature a one-piece integral bell and an extended prealignment entrance that aids in proper alignment

More information

DuroMaxx. Steel Reinforced Polyethylene Technology. Sanitary & Storm Sewer Reline Irrigation Detention Wastewater ENGINEERED SOLUTIONS

DuroMaxx. Steel Reinforced Polyethylene Technology. Sanitary & Storm Sewer Reline Irrigation Detention Wastewater ENGINEERED SOLUTIONS ENGINEERED SOLUTIONS Steel Reinforced Polyethylene Technology STEEL REINFORCED PE TECHNOLOGY Sanitary & Storm Sewer Reline Irrigation Detention Wastewater LEED with Contech Key Performance Advantages»

More information

SANITARY SEWER SPECIFICATIONS

SANITARY SEWER SPECIFICATIONS SANITARY SEWER SPECIFICATIONS OCTOBER 2003 HARVEST-MONROVIA WATER, SEWER, AND FIRE PROTECTION AUTHORITY SECTION 1.00 1.10 Purpose The purpose of this document is to assemble the sewer specifications, policies,

More information

Budget Basins Modular Spill Platform Spill Containment Pallets Spill Containment Platforms

Budget Basins Modular Spill Platform Spill Containment Pallets Spill Containment Platforms Budget Basins Modular Spill Spill Containment Pallets Spill Containment s IBC Containment Units Spill Containment Sumps Outdoor Drum Storage Workstations SPILL CONTAINMENT For nearly 30 years, Eagle Manufacturing

More information

SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE

SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE PART 1: GENERAL 1.01 SECTION INCLUDES PVC pressure pipe and fabricated fittings in nominal sizes 4-inches through 12-inches with cast iron pipe equivalent

More information

SECTION 15062 POLYVINYL CHLORIDE GRAVITY SEWER PIPE AND FITTINGS

SECTION 15062 POLYVINYL CHLORIDE GRAVITY SEWER PIPE AND FITTINGS SECTION 15062 POLYVINYL CHLORIDE (PVC) GRAVITY SEWER PIPE AND FITTINGS PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for the manufacture and installation of polyvinyl chloride,

More information

series 6100 type ct severe duty cup type recessed impeller pumps

series 6100 type ct severe duty cup type recessed impeller pumps series 6100 type ct severe duty cup type recessed impeller pumps Morris 6100_3108.indd 1 14-09-2009 14:43:44 6100 series / cup type severe duty recessed impeller pumps designed to handle large, abrasive

More information

DIVISION 2 - SEWERAGE AND DRAINAGE SECTION 02720 - STORM DRAIN SYSTEMS PART 1 - GENERAL

DIVISION 2 - SEWERAGE AND DRAINAGE SECTION 02720 - STORM DRAIN SYSTEMS PART 1 - GENERAL DIVISION 2 - SEWERAGE AND DRAINAGE SECTION 02720 - STORM DRAIN SYSTEMS PART 1 - GENERAL 1.01 DESCRIPTION A. Furnish and install all storm drains, including manholes, inlets, service lines and other appurtenant

More information

SMOOTHWALL BINS WESTERN

SMOOTHWALL BINS WESTERN SMOOTHWALL BINS WESTERN SMOOTHWALL BINS WESTERN Since launching our first product 65 years ago, Meridian has set the standard in excellence for the storage and handling industry. Meridian has continuously

More information

CHAPTER 8. PIPING EQUIPMENT AND SYSTEMS. 8.1 Piping System and Components 8.2 Piping 8.3 Pumps 8.4 Valves 8.5 Pipe Fittings and Accessories

CHAPTER 8. PIPING EQUIPMENT AND SYSTEMS. 8.1 Piping System and Components 8.2 Piping 8.3 Pumps 8.4 Valves 8.5 Pipe Fittings and Accessories CHAPTER 8. PIPING EQUIPMENT AND SYSTEMS 8.1 Piping System and Components 8.2 Piping 8.3 Pumps 8.4 Valves 8.5 Pipe Fittings and Accessories 8.1 Piping Systems and Components Piping systems are classified

More information

SPECIFICATIONS FOR SEWER PIPE AND LINING INSERTION - TRENCHLESS; GENERAL GUIDELINES (As Provided by NASSCO)

SPECIFICATIONS FOR SEWER PIPE AND LINING INSERTION - TRENCHLESS; GENERAL GUIDELINES (As Provided by NASSCO) SPECIFICATIONS FOR SEWER PIPE AND LINING INSERTION - TRENCHLESS; GENERAL GUIDELINES (As Provided by NASSCO) 1 Intent: The intent of trenchless sewer pipe Insertion is to rehabilitate the existing sewer

More information

SUBDRAINS AND FOOTING DRAIN COLLECTORS. A. Construct subdrains, subdrain cleanouts and outlets, and footing drain collectors.

SUBDRAINS AND FOOTING DRAIN COLLECTORS. A. Construct subdrains, subdrain cleanouts and outlets, and footing drain collectors. SUBDRAINS AND FOOTING DRAIN COLLECTORS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Subdrains B. Subdrain Cleanouts and Outlets C. Footing Drain Collectors D. Storm Sewer Service and Connections 1.02 DESCRIPTION

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

IBC Tote Containment Sumps

IBC Tote Containment Sumps IBC Tote Containment Sumps DENIOS Provides More Models- and More Variety of IBC Totes Sumps than any other Manufacturer Painted, Galvanized, Stainless Steel, and Poly models available Models provide storage

More information

DEPARTMENT OF ENVIRONMENTAL PROTECTION Bureau of Environmental Cleanup and Brownfields. Storage Tank Modification and Maintenance Issues

DEPARTMENT OF ENVIRONMENTAL PROTECTION Bureau of Environmental Cleanup and Brownfields. Storage Tank Modification and Maintenance Issues DEPARTMENT OF ENVIRONMENTAL PROTECTION Bureau of Environmental Cleanup and Brownfields DOCUMENT NUMBER: 263-0900-011 TITLE: Storage Tank Modification and Maintenance Issues EFFECTIVE DATE: March 29, 2014

More information

AMIPOX GRE Pipe systems. Glass Reinforced Epoxy Pipe Solutions for various Applications

AMIPOX GRE Pipe systems. Glass Reinforced Epoxy Pipe Solutions for various Applications AMIPOX GRE Pipe systems Glass Reinforced Epoxy Pipe Solutions for various Applications Amiantit Group of Companies Amipox Dammam The first address for pipe systems and technical solutions The Amiantit

More information

ph is a measure of the hydrogen ion, (H+), concentration in a liquid and classifies liquids as either acidic or caustic.

ph is a measure of the hydrogen ion, (H+), concentration in a liquid and classifies liquids as either acidic or caustic. The Importance of ph- Corrosion/Environmental Impact ph is a measure of the hydrogen ion, (H+), concentration in a liquid and classifies liquids as either acidic or caustic. Liquid discharges that are

More information

Module 3: Sewer Material Lecture 3: Sewer Material

Module 3: Sewer Material Lecture 3: Sewer Material Module 3: Sewer Material Lecture 3: Sewer Material [NPTEL, IIT Kharagpur, Prof. M.M.Ghangrekar, Department of Civil Engineering Page 1 3.0 SEWER MATERIAL 3.1 Important Factors Considered for Selecting

More information

SECTION 02630 STORM DRAINAGE SYSTEM

SECTION 02630 STORM DRAINAGE SYSTEM SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE

More information

DIVISION 4300 STORM DRAINAGE

DIVISION 4300 STORM DRAINAGE DIVISION 4300 STORM DRAINAGE SECTION 4305 STORM SEWER PART 1 - GENERAL 1.01 SCOPE This section covers the construction of storm sewers for the collection and transport of stormwater runoff. 1.02 REFERENCES

More information

LINING SYSTEMS GEOMEMBRANES MADE FROM PE, FPP UND TPO

LINING SYSTEMS GEOMEMBRANES MADE FROM PE, FPP UND TPO LINING SYSTEMS GEOMEMBRANES MADE FROM PE, FPP UND TPO EN Lining Systems Competence in Plastics AGRU Kunststofftechnik GmbH is a high-performance Austrian company, operating in more than 80 countries. AGRU

More information

Section 02702 SEWER PIPE INSTALLATION AND TESTING

Section 02702 SEWER PIPE INSTALLATION AND TESTING PART 1 - GENERAL Section 02702 SEWER PIPE INSTALLATION AND TESTING 1-1. SCOPE. This section covers the installation and testing of all sewer pipe furnished under the following specification sections: Concrete

More information

Water & Wastewater Coatings & Linings Environmentally Friendly Coatings Protection From Collection to Storage

Water & Wastewater Coatings & Linings Environmentally Friendly Coatings Protection From Collection to Storage Water & Wastewater Coatings & Linings Environmentally Friendly Coatings Protection From Collection to Storage Coatings - Linings - Fireproofing Collections & Transportation Manholes, Fittings, Penstocks,

More information

Technical Note PP 811-TN PE Flange Connections

Technical Note PP 811-TN PE Flange Connections Technical Note PP 811-TN PE Flange Connections Flange Connection Flanged joints are made using a DriscoPlex Flange Adapter that is fused to the pipe then joined to a mating flange adapter or a mating appurtenance

More information

Corrosion protection linings. Issue 1

Corrosion protection linings. Issue 1 Corrosion protection linings Issue 1 Introduction While Humes sewerage pipes and products are designed to serve over 100 years in accordance with AS/NZS 4058, we offer corrosion protection linings to increase

More information

Pipe Product Catalog Table of Contents

Pipe Product Catalog Table of Contents Pipe Product Catalog Table of Contents Section A: Drawing #: Page Description A1 Reinforced Concrete Pipe A3 Storm Manhole Sizing Chart (48" - 96") A3.1 Storm Manhole Sizing Chart (108" - 144") A4 48"

More information

Quality is Central. Gas Water & Waste Water Energy Industrial. Leaders in Transition

Quality is Central. Gas Water & Waste Water Energy Industrial. Leaders in Transition Quality is Central. Quality at Georg Fischer Central Plastics is backed by the most extensive research and development, quality assurance and in-house testing programs in the industry. Leaders in Transition

More information

TRICON STEEL-CON. System Specifications

TRICON STEEL-CON. System Specifications TRICON STEEL-CON System Specifications Pipe Size Insulation Thickness Steel Conduit O.D. 1 1½ 6.63 2 1½ 8.63 3 2 10.75 4 2 10.75 6 2 14.00 8 2½ 16.00 10 2½ 18.00 12 2½ 20.00 Based on a minimum 3-6 burial

More information

Commercial Swimming Pool Equipment

Commercial Swimming Pool Equipment Commercial Swimming Pool Equipment Filters Pumps Water Treatment Berlin Filter 64 KIVU Pumps 88 Water Treatment 96 Delta Filters 65-67 Maxim Pump 89 Commercial Filters 68 BX Pumps 90 Pool Return Inlets

More information

SaniTite HP Sewer Pipe 750 mm 1500 mm

SaniTite HP Sewer Pipe 750 mm 1500 mm SaniTite HP Sewer Pipe 750 mm 1500 mm sanitite HP SEWER Pipe 750mm 1500mm Extended bell and spigot Certified to CSA B182.13 A new addition to our proven line of pipe products, SaniTite HP (High Performance)

More information

BLADDER SURGE CONTROL SYSTEM

BLADDER SURGE CONTROL SYSTEM PART I GENERAL 1.01 Description BLADDER SURGE CONTROL SYSTEM This specification describes the requirements for a Bladder Surge Control System. The purpose of the system is to minimize transient pressures

More information

ABOUT US ABOUT PE THE DEFINITION OF POLYETHYLENE

ABOUT US ABOUT PE THE DEFINITION OF POLYETHYLENE ABOUT US ABOUT PE We have been manufacturing polyethylene (HDPE- High Density Polyethylene) pipes, fittings and Butt Welding Machines in addition to design and montage Infrastructure-Waterworks since 1994.

More information

Specifically designed for concrete basins and porous substrates

Specifically designed for concrete basins and porous substrates Specifically designed for concrete basins and porous substrates Team@thermalspraysolutions.com POLYX LINER is a modified thermoplastic copolymer sheet specifically for the use on concrete or other porous

More information

Guidelines for Precast Concrete Grease Interceptors

Guidelines for Precast Concrete Grease Interceptors Guidelines for Precast Concrete Grease Interceptors Purpose Provide an overview of the basic design principals that govern why gravity grease interceptors work Provide a forum for discussion of common

More information

High Density Polyethylene Liners for Rehabilitation of Corroded Pipelines

High Density Polyethylene Liners for Rehabilitation of Corroded Pipelines High Density Polyethylene Liners for Rehabilitation of Corroded Pipelines Jeff Schell General Manager United Pipeline Middle East, Inc. Introduction HDPE Liners A cost effective and environmentally beneficial

More information

B. Provide low pressure steam via a two-parallel full capacity pressure reducing stations with 33/67% pressure reducing valves (PRV s).

B. Provide low pressure steam via a two-parallel full capacity pressure reducing stations with 33/67% pressure reducing valves (PRV s). SECTION 23 22 00 STEAM AND CONDENSATE PIPING AND PUMPS PART 1 - GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish

More information

Steel Spill Containment Pallets

Steel Spill Containment Pallets Steel Spill Containment Pallets O DENIOS steel pallets and sumps are the icons in the industry for compliant containment and long-term service. Heavy gauge steel provides the durability and security demanded

More information

HIGH DENSITY POLYETHYLENE

HIGH DENSITY POLYETHYLENE HIGH DENSITY POLYETHYLENE Sclairpipe Versatile high density polyethylene pipe Sclairpipe Flexible lightweight pipe for your most demanding applications Sclairpipe high density polyethylene (HDPE) pipe

More information

Gas Risers and Transition Fittings

Gas Risers and Transition Fittings 0 Elster Perfection Elster Perfection service line risers and transition fittings In 97, we developed the natural gas industry s first combination plastic/ steel anodeless service line riser. The first

More information

Goulds AF. Axial Flow Pump

Goulds AF. Axial Flow Pump Goulds AF Axial Flow Pump Goulds AF The Industry Leader in Circulating Pump Technologies Fabricated design 42-66 (1050-1600 mm) (shown with optional spring mounted base) Cast design 6-36 (150-900 mm) Goulds

More information

Flowmaster. Cost Effective, Versatile and Durable The industry s best dry handling value SOLUTIONS IN DRY HANDLING

Flowmaster. Cost Effective, Versatile and Durable The industry s best dry handling value SOLUTIONS IN DRY HANDLING Flowmaster B I N A N D S I L O S Y S T E M S Cost Effective, Versatile and Durable The industry s best dry handling value SOLUTIONS IN DRY HANDLING FLOWMASTER PORTABLE HOPPER BINS Multiple Top-Opening

More information

Pro-Lift Steel Pile Foundation Repair

Pro-Lift Steel Pile Foundation Repair Pro-Lift Steel Pile Foundation Repair Pro-Lift Steel Pile Foundation Repair System Pro-lift steel piles are designed for the stresses of Texas soils. They can have multiple steel walls, depending on the

More information

Fats, Oil and Grease. Best Management Practices Manual. Information, Pollution Prevention, and Compliance Information For Food Service Facilities

Fats, Oil and Grease. Best Management Practices Manual. Information, Pollution Prevention, and Compliance Information For Food Service Facilities Fats, Oil and Grease Best Management Practices Manual Information, Pollution Prevention, and Compliance Information For Food Service Facilities Pinellas County Utilities Water Quality Management Division

More information

Green Thread Product Data

Green Thread Product Data Green Thread Product Data Applications Dilute Acids Caustics Produced Water Industrial Waste Hot Water Condensate Return Materials and Construction All pipe manufactured by filament winding process using

More information

SECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION

SECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION SECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION PART 1 GENERAL.01 SECTION INCLUDES Furnishing and installing 4 inch through 16 inch high density

More information

Installation of Large Diameter Buried Pipes

Installation of Large Diameter Buried Pipes Installation of Large Diameter Buried Pipes Sullivan (Sully) Curran P. E., Executive Director I. Introduction and Scope There is an ongoing need to provide designers, specifiers, engineers, consultants

More information

Recommended Fuel Piping Specification For UPP Piping, UL-971

Recommended Fuel Piping Specification For UPP Piping, UL-971 Recommended Fuel Piping Specification For UPP Piping, UL-971 1.0 General The primary delivery piping system shall be for suction or pressure applications and have semi-rigid coaxial type double wall construction,

More information

CCU Engineering Specifications. Section 003300 PRECAST CONCRETE PRODUCTS

CCU Engineering Specifications. Section 003300 PRECAST CONCRETE PRODUCTS CCU Engineering Specifications Section 003300 Effective Date: Nov. 1st, 2011 Page 1 of 5 PRECAST CONCRETE PRODUCTS PART 1 - GENERAL The following specification is intended for use for the design, selection

More information

Drum Dispensing Stations

Drum Dispensing Stations Drum Dispensing Stations O Safely Dispense from 55 Gallon Drums over a Spill Compliant Sump. 1-2-and 4 drum models available Drums are securely held on racks by galvanized positioners Sump and frame constructed

More information

Mainline Pipe Rehabilitation Using Cured-in-Place Pipe (CIPP) & Folded Pipe Technology

Mainline Pipe Rehabilitation Using Cured-in-Place Pipe (CIPP) & Folded Pipe Technology 2007 Pumper & Cleaner Environmental Expo International Wednesday February 7, 2007 Mainline Pipe Rehabilitation Using Cured-in-Place Pipe (CIPP) & Folded Pipe Technology What is Cured-In-Place Pipe (CIPP)

More information

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING 60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed

More information

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved

More information

Cubetainer. The competition can t stack up to Snyder! Stackable Tanks, Stands and Containments

Cubetainer. The competition can t stack up to Snyder! Stackable Tanks, Stands and Containments Cubetainer The competition can t stack up to Snyder! Stackable Tanks, Stands and Containments Providing Bulk Storage Solutions for Motor Oil, Lubricants, Hydraulic Fluids, ATF, Antifreeze & DEF www.snydercubetainer.com

More information

Specification for Pipe Bursting Gravity Sewer Mains with HDPE Pipe

Specification for Pipe Bursting Gravity Sewer Mains with HDPE Pipe Specification for Pipe Bursting Gravity Sewer Mains with HDPE Pipe 1. GENERAL The following supplemental sewer main specifications are intended to address the installation of high-density polyethylene

More information

CONCRETE PROTECTIVE LINERS

CONCRETE PROTECTIVE LINERS CONCRETE PROTECTIVE LINERS E COMPETENCE IN PLASTICS AGRU Kunststofftechnik GmbH is a successful, Austrian family business with worldwide activities in production and distribution of high-grade thermoplastic

More information

Flowtite Jacking Pipe

Flowtite Jacking Pipe U.S. COMPOSITE PIPE SOUTH, LLC. MEMBER OF KTI PIPE GROUP OF COMPANIES Flowtite Jacking Pipe 18585 Samuels Rd. Zachary, La. 70791 PH. 225-658-6166 Fax 225-658-0947 www.flowtitepipe.com Flowtite GRP Pipe

More information

PACKAGE TERTIARY FILTER SYSTEM SPECIFICATIONS MODELS TF-2-6-C THROUGH TF-2-35-C

PACKAGE TERTIARY FILTER SYSTEM SPECIFICATIONS MODELS TF-2-6-C THROUGH TF-2-35-C PACKAGE TERTIARY FILTER SYSTEM SPECIFICATIONS MODELS TF-2-6-C THROUGH TF-2-35-C Pollution Control Systems Inc. (PCS) is pleased to provide the following equipment specifications for your consideration.

More information

San Antonio Water System Standard Specifications for Construction ITEM NO. 1100 SLIP-LINING SANITARY SEWERS

San Antonio Water System Standard Specifications for Construction ITEM NO. 1100 SLIP-LINING SANITARY SEWERS ITEM NO. 1100 SLIP-LINING SANITARY SEWERS 1100.1 DESCRIPTION: This item shall consist of slip-lining sanitary sewer pipe, which is accomplished by pulling or pushing liner pipe into existing sewers by

More information

HDPE PRODUCTS QUALITY, PERFORMANCE AND ECONOMY COMBINED

HDPE PRODUCTS QUALITY, PERFORMANCE AND ECONOMY COMBINED QUALITY, PERFORMANCE AND ECONOMY COMBINED LANE S HDPE DRAINAGE PIPE Scan for more information on Lane s HDPE product line. Lane provides the complete product line to meet all your HDPE drainage needs -

More information

SECTION 02400 - STORM DRAIN SYSTEM

SECTION 02400 - STORM DRAIN SYSTEM SECTION 02400 - STORM DRAIN SYSTEM CONTENTS: Part 1 - General... 1 1.01 Work Included... 1 1.02 Related Requirements... 1 1.03 Reference Standards... 1 1.04 Quality Assurance... 1 1.05 Measurement And

More information