ENGINE FUNDAMENTALS. Name Date Score _. Write the letter of the answer in each blank provided.
|
|
|
- Preston Lucas
- 7 years ago
- Views:
Transcription
1 WRITTEN TEST UNDERSTANDING 1 ENGINE FUNDAMENTALS Name Date Score _ INSTRUCTIONS Write the letter of the answer in each blank provided. OBJECTIVE 1 List safety hazards associated with engine performance work. 1. Which of the following lists of injuries are associated with engine performance work? A. allergic reactions, electrical shock, exposure to toxic materials B. electrical shock, exposure to toxic materials, muscle strains, hearing loss C. cuts, electrical shock, exposure to toxic materials, muscle strains D. cuts, electrical shock, repetitive motion injuries, exposure to toxic materials OBJECTIVE 2 List chemicals related to automotive engine service that contain hazardous materials. 2. Which of the following is NOTa chemical related to automotive engine service that contains hazardous materials? A. battery acid B. carburetor cleaners C. gasoline additives D. injector solutions 3. Which of the following is NOTa chemical related to automotive engine service that contains hazardous materials? A. antifreeze gases C. compounds used to free valve lifters D. salt TEACHER MATERIALS - Engine Periormance Specialist WRIDEN TEST - CIMC
2 OBJECTIVE 3 List the names of the major engine systems. 4. Which of the following is a TRUE list of the major engine systems? A. ignition system, lubrication system, cooling system. charging system B. starting system. heating system. charging system. exhaust system C. fuel system. lubrication system, fluid system, sound system D. ignition system, charging system, fluid system, exhaust system OBJECTIVE 4 Describe the functions of the major engine systems. 5. Which of the following systems provides the spark to burn the fuel? A. charging system B. fuel system C. ignition system D. starting system 6. True or False: The exhaust system reduces friction and cleans the engine. 7. True or False: The starting system also charges the battery. OBJECTIVE 5 List the three elements that must be present in order for combustion to occur. 8. Which of the following elements is NOT necessary in order for combustion to occur? A air B. hydrocarbons C. fuel D. heat May De photocopied for student USB. WRITTEN TEST - CIMC
3 OBJECTIVE 6 List the four strokes of an internal combustion engine in the order of their occurrence. 9. Which of the following lists in order of occurrence the four strokes of an internal combustion engine?, intake, power, exhaust B. intake, power, compression, exhaust, compression, power, exhaust, compression, intake, exhaust OBJECTIVE 7 Using illustrations of cylinders, sketch the spark in the correct engine stroke. 10. During which of the following engine strokes is spark delivered to create combustion? OBJECTIVE 8 Using illustrations of cylinders, sketch the piston in the correct position for each of the four engine strokes. 11. For the figure below, identify the engine stroke indicated by the number WRITTEN TEST - CIMC
4 ".-:- 12. For the figure below, identify the engine stroke indicated by the number OBJECTIVE 9 Using illustrations of cylinders, draw an arrow to indicate the direction of piston movement for each of the four engine strokes. 13. True or False: Duling the intake stroke. the piston moves down away from the valves. ":i 14. True or False: Duling the power strokj' the piston moves up toward the valves.. OBJECTIVE 10 Using illustrations of cylinders, sketch the intake valve in. the correct position for each of the four engine strokes. 15. Trtre or False: Duling the exhaust stroke. the intake WRITTEN TEST - CIMC
5 16. True or False: During the intake stroke, the intake OBJECTIVE 11 Using illustrations of cylinders. sketch the exhaust valve in the correct position for each of the four engine strokes. 17. True or False: During the exhaust stroke, the exhaust OBJECTIVE 12 List the names of emission control systems. 18. Which of the followingis the name of an emission A. air conditioning system system C. fuel injection system D. positive crankcase ventilation system 19. Which of the followingis the name of an emission A. carburetor heat control system B. heated air induction system C. negative crankcase ventilation system D. oxygen injection system 20. Which of the followingis the name of an emission A. oxygen exhaust system B. catalytic control system C. carburetor control system D. air conditioning control system WRITTEN TEST - CIMC
EXPERIMENT NO. 3. Aim: To study the construction and working of 4- stroke petrol / diesel engine.
EXPERIMENT NO. 3 Aim: To study the construction and working of 4- stroke petrol / diesel engine. Theory: A machine or device which derives heat from the combustion of fuel and converts part of this energy
Pollution by 2-Stroke Engines
Pollution by 2-Stroke Engines By Engr. Aminu Jalal National Automotive Council At The Nigerian Conference on Clean Air, Clean Fuels and Vehicles, Abuja, 2-3 May 2006 Introduction to the 2-Stroke Engine
KNOWLEDGE AND EMPLOYABILITY AUTO MECHANICS GRADES 8 AND 9
KNOWLEDGE AND EMPLOYABILITY AUTO MECHANICS GRADES 8 AND 9 Knowledge and Employability junior high school occupational programs of study focus on the exploration stage of student understanding and progress.
AUTOMOTIVE GAS OIL. Robert Shisoka Hydrocarbon Management Consultancy
AUTOMOTIVE GAS OIL Robert Shisoka Hydrocarbon Management Consultancy AUTOMOTIVE GAS OIL AUTOMOTIVE GAS OIL COMMON TERMS Fossil Fuels From Organic Matter Over Millions of Years (Natural Gas, Crude Oil,
SV710-SV740. SV810-SV840 Owner's Manual
SV710-SV740 SV810-SV840 Owner's Manual IMPORTANT: Read all safety precautions and instructions carefully before operating equipment. Refer to operating instruction of equipment that this engine powers.
1The Automobile. Introduction to Automotive Technology. Section 1
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. Section 1 Introduction to Automotive Technology 1. The Automobile 2. Automotive Careers and
SLP 1.85 Ratio Offset Rocker Arms with Valve Springs, LS3
PART #50190 SLP 1.85 Ratio Offset Rocker Arms with Valve Springs, LS3 PACKING LIST Before installation, use this check list to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER
Job Hazard/Safety Analysis For the Plumber
Job Hazard/Safety Analysis For the Plumber 1 INTRODUCTION Job Hazard/Safety Analysis for the Plumber is a partial list of known task performed by the professional plumber. We have placed the tasks in alphabetical
EL DORADO UNION HIGH SCHOOL DISTRICT Educational Services ADVANCED AUTOMOTIVE TECHNOLOGY (541) Trades & Industrial Education
Educational Services ADVANCED AUTOMOTIVE TECHNOLOGY (541) DEPARTMENT: DISTRICT SITES: LENGTH OF COURSE: CREDIT: Trades & Industrial Education EHS, ORHS, PHS Year 5 units each semester GRADE LEVEL: Advanced
Principles of Engine Operation
Internal Combustion Engines ME 422 Yeditepe Üniversitesi Principles of Engine Operation Prof.Dr. Cem Soruşbay Information Prof.Dr. Cem Soruşbay İstanbul Teknik Üniversitesi Makina Fakültesi Otomotiv Laboratuvarı
As you learned in the previous activity, energy is either potential energy or kinetic energy. Each can take many forms.
Topic 6: Forms of Potential Energy As you learned in the previous activity, energy is either potential energy or kinetic energy. Each can take many forms. Forms of potential energy include Stored Mechanical
AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District
AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District Repairs and overhauls automobiles, buses, trucks, and other automotive vehicles: Examines vehicle and discusses with customer or
Marine Piston Damage By Tom Benton, Marine Surveyor
Marine Piston Damage By Tom Benton, Marine Surveyor In the last several years I have noticed an increase in the number of outboard motors which have sustained piston damage, and several cases in V-8 inboard
EFFECT. DATE: 01/13/1991 SERIES PURPOSE: The purpose of the automotive mechanic occupation is to repair & maintain cars, trucks & equipment.
STATE OF OHIO (DAS) CLASSIFICATION SPECIFICATION CLASSIFICATION SERIES: Automotive Mechanic MAJOR AGENCIES: Attorney General only SERIES NO.: 5213AG EFFECT. DATE: SERIES PURPOSE: The purpose of the automotive
Occupational Health Program Safety Training Series. Lockout/Tagout Safety Awareness Training
Occupational Health Program Safety Training Series Lockout/Tagout Safety Awareness Training 1 Lock out/tag out Lock out: the placement of a lockout device (lock) on an energy isolating device in accordance
The Use of Exhaust Gas Recirculation (EGR) Systems in Stationary Natural Gas Engines. The Engine Manufacturers Association August 2004
www.enginemanufacturers.org Two North LaSalle Street Suite 2200 Chicago, Illinois 60602 Tel: 312/827-8700 Fax: 312/827-8737 The Use of Exhaust Gas Recirculation (EGR) Systems in Stationary Natural Gas
Lockout - Tagout. Control of Hazardous Energy OSHA Standard 1910.147
Lockout - Tagout Control of Hazardous Energy OSHA Standard 1910.147 You will learn Purpose of Lockout-Tagout Requirements for LOTO Types of Hazardous Energy Procedures for LOTO Types of Energy Electrical
SAN DIEGO COMMUNITY COLLEGE DISTRICT MIRAMAR COLLEGE ASSOCIATE DEGREE COURSE OUTLINE
AUTO 085 CIC Approval: 05/26/2005 BOT APPROVAL: 07/14/2005 STATE APPROVAL: EFFECTIVE TERM: Fall 2005 SECTION I SAN DIEGO COMMUNITY COLLEGE DISTRICT MIRAMAR COLLEGE ASSOCIATE DEGREE COURSE OUTLINE SUBJECT
OD1619 PRINCIPLES OF INTERNAL COMBUSTION ENGINES
SUBCOURSE OD1619 EDITION 8 PRINCIPLES OF INTERNAL COMBUSTION ENGINES US ARMY BRADLEY FIGHTING VEHICLE SYSTEMS MECHANIC CORRESPONDENCE COURSE MOS/SKILL LEVEL: 63T30 PRINCIPLES OF INTERNAL COMBUSTION ENGINES
CLASSIFICATION OF INTERNAL COMBUSTION ENGINES VARIOUS TYPES OF ENGINES
CLASSIFICATION OF INTERNAL COMBUSTION ENGINES VARIOUS TYPES OF ENGINES CLASSIFICATION OF INTERNAL COMBUSTION ENGINES 1. Application 2. Basic Engine Design 3. Operating Cycle 4. Working Cycle 5. Valve/Port
Intake Manifold: Service and Repair
2000 Chevy Truck S10/T10 P/U 2WD L4-2.2L VIN 4 Copyright 2008, ALLDATA 9.90 Page 1 Intake Manifold: Service and Repair Removal Procedure 1. Disconnect the battery negative cable. Refer to Battery Replacement.
The Relation Between Gasoline Quality, Octane Number and the Environment
MH1 The Relation Between Gasoline Quality, Octane Number and the Environment Rafat Assi National Project Manager Jordan s Second National Communications on Climate Change (www.snc.gov.jo) Presented at
Exhaust emissions of a single cylinder diesel. engine with addition of ethanol
www.ijaser.com 2014 by the authors Licensee IJASER- Under Creative Commons License 3.0 editorial@ijaser.com Research article ISSN 2277 9442 Exhaust emissions of a single cylinder diesel engine with addition
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE AUTO 220 INTERNAL COMBUSTION ENGINES
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE AUTO 220 INTERNAL COMBUSTION ENGINES Prepared By: BRANDON BALDWIN CANINO SCHOOL OF ENGINEERING TECHNOLOGY AUTOMOTIVE TECHNOLOGY
Diesel: Troubleshooting
Diesel: Troubleshooting Probable Cause Engine not starting Hard to start engine Runs rough at lower RPM Lack of power Diesel knock / pinking Black White Blue Low compression X X X Low fuel pressure X X
Heavy Duty Equipment Mechanic (Class Code 3743) Task List. Inspection and Diagnosis
Heavy Duty Equipment Mechanic (Class Code 3743) Task List Inspection and Diagnosis In order to verify complaints and determine malfunctions a Heavy Duty Mechanic: 1. Reads operators written trouble reports,
Fleet Technician I Fleet Technician II Fleet Technician III
Fleet Technician I Fleet Technician II Fleet Technician III DEFINITION Under general supervision (Fleet Technician I) or direction (Fleet Technician II and III), perform skilled repairs and preventive
MAINTENANCE OF WHEELMOVE IRRIGATION SYSTEMS
MAINTENANCE OF WHEELMOVE IRRIGATION SYSTEMS F. Richard Beard, Agricultural Equipment, Structures and Electricity Robert W. Hill, Biological & Irrigation Engineering Boyd Kitchen, Uintah County Extension
EXPERIMENTAL VALIDATION AND COMBUSTION CHAMBER GEOMETRY OPTIMIZATION OF DIESEL ENGINE BY USING DIESEL RK
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 6340(Print), ISSN 0976 6340 (Print) ISSN 0976 6359
Emission report Honda accord/cu1
Emission report Honda accord/cu1 Comparing emissions petrol/lpg Tested vehicle Brand: Honda Type: Accord/CU1 Model year: 2008 Motor code: R20A3 Cylinder capacity: 2000cc Fuel system: Matsushita Supplier
Cylinder Leak- Down Tester
Cylinder Leak- Down Tester Item 94190 INSTRUCTIONS AND PRECAUTIONS Visit our website at: http://www.harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are
Engineering, Bharathiyar College of Engineering and Technology, Karaikal, Pondicherry 609 609, India
74 The Open Fuels & Energy Science Journal, 2008, 1, 74-78 Open Access Some Comparative Performance and Emission Studies on DI Diesel Engine Fumigated with Methanol and Methyl Ethyl Ketone Using Microprocessor
Turbocharger system components, servicing
21-1 Turbocharger system components, servicing Engine codes: AAZ, 1Z, AHU Observe rules of cleanliness Page 21-10 Turbocharger hoses and lines, connecting Page 21-11 WARNING! Do not re-use any fasteners
Guardian Fire Safety Solutions FIRE RISK CONTROL IN WELDING FUME EXTRACTION SYSTEMS
Guardian Fire Safety Solutions FIRE RISK CONTROL IN WELDING FUME EXTRACTION SYSTEMS Guardian Fire Safety Solutions FIRE RISK CONTROL IN WELDING FUME EXTRACTION SYSTEMS DO YOU CONTROL THE RISK OF FIRE AT
INTERNAL COMBUSTION (IC) ENGINES
INTERNAL COMBUSTION (IC) ENGINES An IC engine is one in which the heat transfer to the working fluid occurs within the engine itself, usually by the combustion of fuel with the oxygen of air. In external
MECHANICAL ENGINEERING EXPERIMENTATION AND LABORATORY II EXPERIMENT 490.07 ENGINE PERFORMANCE TEST
MECHANICAL ENGINEERING EXPERIMENTATION AND LABORATORY II EXPERIMENT 490.07 ENGINE PERFORMANCE TEST 1. Objectives To determine the variation of the brake torque, brake mean effective pressure, brake power,
Handling and Application Information
Document Library TS Data Sheet 08956 Public Rev:1 Effective: 11/03/2000 Status: Active Universal Fuel Injector Cleaner Data Sheet 3M Part No.(s) 3M Part Descriptor(s) 08956 Professional Formula Universal
Job Hazard/Safety Analysis For the Housekeeper
Job Hazard/Safety Analysis For the Housekeeper 1 INTRODUCTION Job Hazard/Safety Analysis for the Housekeeper is a partial list of known task performed by the professional housekeeper. We have placed task
Job Hazard/Safety Analysis For the Building Maintenance Worker
Job Hazard/Safety Analysis For the Building Maintenance Worker 1 INTRODUCTION Job Hazard/Safety Analysis for the Building Maintenance Worker is a partial list of known task performed by the professional
Questions and Answers
Emissions Warranties for 1995 and Newer Light-duty Cars and Trucks under 8,500 Pounds Gross Vehicle Weight Rating (GVWR) Federally required emission control warranties protect you, the vehicle owner, from
Implications. removing sulphur in. Diesel & Gasoline. Under. Euro IV fuel regime
Implications Of removing sulphur in Diesel & Gasoline Under Euro IV fuel regime Role of fuels Diesel & Gasoline Fuel serves three major functions in a diesel engine. 1. Energy source to drive the engine
MCI 35.80a AUTOMOTIVE ENGINE MAINTENANCE AND REPAIR MARINE BARRACKS WASHINGTON, D.C.
MCI 35.80a MARINE CORPS INSTITUTE AUTOMOTIVE ENGINE MAINTENANCE AND REPAIR MARINE BARRACKS WASHINGTON, D.C. UNITED STATES MARINE CORPS MARINE CORPS INSTITUTE 912 POOR STREET SE WASHINGTON, DC 20391-5680
Air Induction Systems
Air Induction Systems Air Supply Requirements of Diesels All internal combustion engines need an adequate supply of air that is clean, dry, filtered, fresh, and relatively cool. Adequate Supply Diesel
The Ogunmuyiwa Engine Cycle
The Ogunmuyiwa Engine Cycle Dapo Ogunmuyiwa M.Sc VDI Chairman / CEO Tel: (+49) 162 961 04 50 E-mail: Dapo.Ogunmuyiwa@omttec.eu Ogunmuyiwa Motorentechnik GmbH Technologie- und Gruenderzentrum (TGZ) Am Roemerturm
Oxy-Fuel Gas Welding. Given a functional oxy-fuel gas unit, instruction and demonstration of use, each student will be able to:
I. Competencies Oxy-Fuel Gas Welding Given a functional oxy-fuel gas unit, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the oxy-fuel gas unit. B. Pass
INTERNAL COMBUSTION RECIPROCATING PISTON ENGINES
INTERNAL COMBUSTION RECIPROCATING PISTON ENGINES TYPES OF RECIPROCATING INTERNAL COMBUSTION PISTON ENGINES Depending on the ignition pattern: Otto cycle (spark-ignition - SI engines), Diesel cycle (auto-ignition
Jing Sun Department of Naval Architecture and Marine Engineering University of Michigan Ann Arbor, MI USA
Automotive Powertrain Controls: Fundamentals and Frontiers Jing Sun Department of Naval Architecture and Marine Engineering University of Michigan Ann Arbor, MI USA Julie Buckland Research & Advanced Engineering
1/ Prevention of Valve-Seat Recession in European Markets, McArragher, Clark & Paesler, CEC/93/EF19, May 1993.
1. Using Lead Free Fuel in Older Vehicles - Mechanical Implications While lead is added to gasoline for the purpose of raising octane number and therefore allowing higher compression and more efficient
Hydrogen as a fuel for internal combustion engines
Hydrogen as a fuel for internal combustion engines Contents: Introduction External mixture formation for hydrogen operated engines Experimental engine for hydrogen in Stralsund Internal mixture formation
Consumers consider the purchase of a vehicle to be their second largest expenditure, and therefore they demand
BUYING A NEW CAR? Consumers consider the purchase of a vehicle to be their second largest expenditure, and therefore they demand value for their money. Some are prepared to pay whatever the market demands
Forename: Surname: School / College/ Institution. Course date: / / RDTHSC:
Specialist Extension Level S5HS Forename: Surname: School / College/ Institution Course date: / / RDTHSC: These Training and Accreditation Guidelines are based on the following essential publications:
Installation Instructions for Alarm Module Kit A043F059
Instruction Sheet 07-2013 Installation Instructions for Alarm Module Kit A043F059 1 Introduction The information contained within is based on information available at the time of going to print. In line
Austin High School Automotive Service Technology Engine Repair 9 th grade Course Syllabus
Austin High School Automotive Service Technology Engine Repair 9 th grade Course Syllabus 1 Prerequisites: Students entering the Automotive Technology Program for engine repair must be of the ninth grade
Air filter: A paper or synthetic fabric baffle that captures dust, dirt and debris from the airstream entering the engine.
Air filter: A paper or synthetic fabric baffle that captures dust, dirt and debris from the airstream entering the engine. Aftermarket part: Any service replacement part not obtained from the vehicle manufacturer
Apprenticeship Training Standard. Automotive Service Technician. Trade Code: 310S
Apprenticeship Training Standard Automotive Service Technician Trade Code: 310S Development Date: January 2003 Please Note: Apprenticeship Training and Curriculum Standards were developed by the Ministry
Analytical Report on Consumer Gasoline Choices
The Downtown Review Volume 1 Issue 1 Article 2 2015 Analytical Report on Consumer Gasoline Choices Michael Stanley Cleveland State University Follow this and additional works at: http://engagedscholarship.csuohio.edu/tdr
Perfectly Adapted. ISL Euro 6 Gas Engine 250-320PS
Perfectly Adapted ISL Euro 6 Gas Engine 250-320PS Cummins ISL-G The ISL G is the natural choice in alternative-fuel engine technology. With industry leading performance, it combines all the advantages
Mechanical Systems Competency 1.20
Competency 1.20 Mechanical systems personnel shall demonstrate a working level knowledge of the safety and health fundamentals of mechanical systems and/or components. 1. Supporting Knowledge and Skills
Maintenance and Light Repair IV (MLR IV)
Maintenance and Light Repair IV (MLR IV) Primary Career Cluster: Consultant: Course Code(s): 5882 Transportation, Distribution, & Logistics Rachel Allen, (615) 532-2835, Rachel.Allen@tn.gov Prerequisite(s):
3/5/2015. Oil Analysis Tests. Lubricating Oils. Six Functions of Lubricating Oil
Oil Analysis Tests Oil analysis is a series of laboratory tests used to evaluate the condition of used lubricants and equipment components. By studying the results of the used oil analysis tests, a determination
Alternative to Fossil Fuel
Alternative to Fossil Fuel Biodiesel Emissions Biodiesel Biodiesel is made from any vegetable oil such as Soya, Rice bran, Canola, Palm, Coconut, Jatropha or peanut,from any animal fat and recycled cooking
A.Pannirselvam*, M.Ramajayam, V.Gurumani, S.Arulselvan and G.Karthikeyan *(Department of Mechanical Engineering, Annamalai University)
A.Pannirselvam, M.Ramajayam, V.Gurumani, S.Arulselvan, G.Karthikeyan / International Journal of Vol. 2, Issue 2,Mar-Apr 212, pp.19-27 Experimental Studies on the Performance and Emission Characteristics
Compressed Gas Cylinders Safety Policy
Compressed Gas Cylinders Safety Policy This is an example of a compressed gas safety policy for a client whose operations include welding. Oxygen and acetylene tanks are in use and in storage at this client's
Fire Security Systems
Fire Security Systems Fire Security Systems mail@fire-security.net www.fire-security.net P: 1 604 941 1001 F: 1 604 648 9311 Who is Fire Security Systems For 25 years, Fire Security has been involved in
Elements of Physics: Energy, Work, and Power Teacher s Guide
: Teacher s Guide Grade Level: 9 12 Curriculum Focus: Physical Science Lesson Duration: Three class periods Program Description Much of our success as an industrialized society stems from our ability to
Effect of magnetic field on performance and emission of single cylinder four stroke diesel engine
IOSR Journal of Engineering (IOSRJEN) ISSN (e): 2250-3021, ISSN (p): 2278-8719 Vol. 04, Issue 05 (May. 2014), V5 PP 28-34 www.iosrjen.org Effect of magnetic field on performance and emission of single
Motor Vehicle Mechanical Repair and Service
www.revenue.state.mn.us Motor Vehicle Mechanical Repair and Service 131B Sales Tax Fact Sheet What s New in 2015 This fact sheet was updated to clarify subcontracted repairs and services on page. This
Pressure Vessels (Air Compressors) and LPG Tanks
Pressure Vessels (Air Compressors) and LPG Tanks 1. Identification of Workplace Hazard Any container, tank or vessel that contains pressurized material is a potential hazard to employees due to the force
AUTOMOTIVE TECHNOLOGY (ATECH)
AUTOMOTIVE TECHNOLOGY (ATECH) The Automotive Technology curriculum is designed to prepare students for employment as apprentice auto mechanics or to allow students to continue toward a Baccalaureate degree
Compressed Gas Cylinder Storage and Handling Guide
Overview Compressed gas cylinders are used in many workplaces to store gases that vary from extremely flammable (acetylene) to extremely inert (helium). Many compressed gas cylinders are stored at extremely
Compressed Gas Cylinder Safety
Compressed Gas Cylinder Safety I. Background. Due to the nature of gas cylinders, special storage and handling precautions are necessary. The hazards associated with compressed gases include oxygen displacement,
Vectra Caravan 1.8 90kW/122hp 5-speed station wagon 5 doors 1
Vectra Caravan 1.8 90kW/122hp 5-speed station wagon 5 doors 1 1.8 ECOTEC front, transverse in front of axle, 7 50' forward inclined Bore (mm): 80.5 Stroke (mm): 88.2 Displacement (cc): 1796 Compression
WEEKLY SAFETY MEETING All Euramax Subsidiaries WELDING SAFETY / HOT WORK SAFETY. Safety Meeting Contents. Meeting Notice.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
AVIATION SCIENCE LESSON 6: FUEL PUMPS AND FUEL SYSTEMS. Paul Ladegard, Alan Dick
AVIATION SCIENCE LESSON 6: FUEL PUMPS AND FUEL SYSTEMS Teachers: Paul Ladegard, Alan Dick Subject: Aviation Science Grades: Secondary Duration of Lesson: 5-6 Hours Subjects: Technology, Science Learning
FS Lubricants. Oil Analysis Program
FS Lubricants Oil Analysis Program What can an oil analysis do for you? 1. Establish safe and proper drain intervals. 2. Provide a reduction in unforeseen breakdowns. 3. Reduce down time. 4. Minimize the
ENTRY-LEVEL AUTOMOTIVE TECHNICIAN
ENTRY-LEVEL AUTOMOTIVE TECHNICIAN Definition: An entry-level automotive technician performs diagnosis and repair to gasoline powered cars and light trucks with limited supervision. The last two bands of
AIR POWERED ENGINE INTRODUCTION. Pramod Kumar.J Mechanical Engineer, Bangalore, INDIAs
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 2, March-April 2016, pp. 66 72, Article ID: IJMET_07_02_010 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=2
DOE FUNDAMENTALS HANDBOOK MECHANICAL SCIENCE Volume 1 of 2
DOE-HDBK-1018/1-93 JANUARY 1993 DOE FUNDAMENTALS HANDBOOK MECHANICAL SCIENCE Volume 1 of 2 U.S. Department of Energy Washington, D.C. 20585 FSC-6910 Distribution Statement A. Approved for public release;
The 2.0l FSI engine with 4-valve technology
Service Training Self-study programme 322 The 2.0l FSI engine with 4-valve technology Design and function The 2.0l engine is based on the tried and tested 827/113 series. Thanks to FSI technology (Fuel
B Dinesh Prabhu, Asst. Professor, P E S College Engg., Mandya, KARNATAKA 1
Firing Order Every engine cylinder must fire once in every cycle. This requires that for a four-stroke fourcylinder engine the ignition system must fire for every 180 degrees of crank rotation. For a sixcylinder
Ethanol Vehicle and Infrastructure Codes and Standards Citations
Ethanol Vehicle and Infrastructure Codes and Standards Citations This document lists codes and standards typically used for U.S. ethanol vehicle and infrastructure projects. To determine which codes and
Take care with oxygen Fire and explosion hazards in the use of oxygen
Fire and explosion hazards in the use of oxygen This leaflet provides information on the fire and explosion hazards in the use of oxygen. It is for anyone who uses oxygen gas in cylinders. Hazards from
Vehicle Fire Protection. An Ownerʼs Manual for ANSUL Fire Suppression/Detection Systems
Vehicle Fire Protection An Ownerʼs Manual for ANSUL Fire Suppression/Detection Systems 002792 Off-road vehicles do have fires Statistics show that off-road vehicles burn with alarming frequency. These
Engine Heat Transfer. Engine Heat Transfer
Engine Heat Transfer 1. Impact of heat transfer on engine operation 2. Heat transfer environment 3. Energy flow in an engine 4. Engine heat transfer Fundamentals Spark-ignition engine heat transfer Diesel
Automotive Base Oil Presentation
Automotive Base Oil Presentation What is a Base Oil? The refined petroleum mineral or synthetic material that is produced by a refinery to a required set of specifications. A lubricant s quality can depend
Engine Friction and Lubrication
Engine Friction and Lubrication Engine friction terminology Pumping loss Rubbing friction loss Engine Friction: terminology Pumping work: W p Work per cycle to move the working fluid through the engine
Diesel-to-Natural Gas Engine Conversions. A cost-effective alternative to new natural gas vehicles
Diesel-to-Natural Gas Engine Conversions A cost-effective alternative to new natural gas vehicles The Omnitek Solution Engine Conversions A feasible and affordable option! Omnitek Solution Omnitek has
Police Fleet Technician
Career Service Authority Police Fleet Technician Page 1 of 5 GENERAL STATEMENT OF CLASS DUTIES This is a skilled journeyman mechanic position in the diagnosis, overhaul, repair and maintenance of automotive
Continuous flow direct water heating for potable hot water
Continuous flow direct water heating for potable hot water An independently produced White Paper for Rinnai UK 2013 www.rinnaiuk.com In the 35 years since direct hot water systems entered the UK commercial
Present Scenario of Compressed Natural Gas (CNG) as a Vehicular fuel in Bangladesh
Present Scenario of Compressed Natural Gas (CNG) as a Vehicular fuel in Bangladesh Salma A. Iqbal 1, M. Iqbal 2 and A.F.M. Salauddin 3 1. Department of Chemical Engineering & Polymer Science 2. Department
Diesel Engine Fundamentals Course# ME406
Diesel Engine Fundamentals Course# ME406 EZpdh.com All Rights Reserved Department of Energy Fundamentals Handbook MECHANICAL SCIENCE Module 1 Diesel Engine Fundamentals Diesel Engine Fundamentals DOE-HDBK-1018/1-93
Section 11 - System Diagrams
Section 11 System Diagrams Page 11-1 Section 11 - System Diagrams Section Contents Page Overview...11-3 Flow Diagram, Fuel System...11-4 Flow Diagrams, Lubricating Oil System...11-5 Flow Diagrams, Cooling
SCREAMIN' EAGLE PRO TWIN CAM 110 (1800 CC) BOLT-ON CON- VERSION KIT
-J0 REV. 0-0-0 SCREAMIN' EAGLE PRO TWIN CAM 0 (00 CC) BOLT-ON CON- VERSION KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section
Understanding Tier 4 Interim and Tier 4 Final EPA regulations for generator set applications
Understanding Tier 4 Interim and Tier 4 Final EPA regulations for generator set applications While Tier 4 standards that begin to take effect in 2011 do not apply to generator sets used strictly for emergency
Job Hazard/Safety Analysis For the Paint & Finish Worker
Job Hazard/Safety Analysis For the Paint & Finish Worker 1 INTRODUCTION Job Hazard/Safety Analysis for the Paint & Finish Worker is a partial list of known task performed by the professional paint and
Notes. Material 1. Personal Protective Equipment 2.
29CFR 1926.20(b)-Accident Reduction, 29CFR 1926.21- Safety Training & Education 29CFR 1926.20(a)-Unsafe Working Conditions 29 CFR 1910.132-138, the "Personal Protection Equipment" standard. & 20 CFR 1910.134
Job Hazard/Safety Analysis For the Lab Worker
Job Hazard/Safety Analysis For the Lab Worker 1 INTRODUCTION Job Hazard/Safety Analysis for the Lab Worker is a partial list of known task performed by the professional laboratory worker. We have placed
CFD Simulation of HSDI Engine Combustion Using VECTIS
CFD Simulation of HSDI Engine Combustion Using VECTIS G. Li, S.M. Sapsford Ricardo Consulting Engineer s Ltd., Shoreham-by-Sea, UK ABSTRACT As part of the VECTIS code validation programme, CFD simulations
Section 6 - System Diagrams
Section 6 System Diagrams Page 6-1 Section 6 - System Diagrams Section Contents Page Overview...6-3 Flow Diagram, Fuel System...6-4 Flow Diagrams, Lubricating Oil System...6-5 Flow Diagrams, Cooling System...6-8