ILLUMINATION OPTIONS PANEL & C. 3.0max. page 66. page 66. page 66. page page page 66

Transcription

1 Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 00/30V (marked 0V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, hite /2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, hite 0-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 2/4V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Indicator ights (Neon, ED and Filament amp) Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 6.3mm dia Red, amber, green and clear lenses Red, yellow, green, blue and white EDs ide choice of styles U file E63363 CSA file / R2938 Approvals shown for neon versions only TERM TYPE PANE & C IUMINATION (C) 045 AA max Ø6.7 () 04 OO max Ø7.6 () 045 OO available 6.3 max Ø7.6 () 0245 OO available max Ø OO available Ø Ø7.5 () 095 BB Ø9.5 Ø

2 Indicator ights (Neon, ED and Filament amp) Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 00/30V (marked 0V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, hite /2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, hite 0-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 2/4V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 6.3mm dia Red, amber, green and clear lenses Red, yellow, green, blue and white EDs ide choice of styles U file E63363 CSA file / R2938 Approvals shown for neon versions only TERM TYPE PANE & C IUMINATION 295 OO available Ø Ø7.5 (H) 0568 A(*) Deep lens profile (VDE at T00) Ø 27.5 *Final suffix (X) - ong barrier *Final suffix (Y) - Short barrier *Final suffix () - For ires (H) 0568 B(*) Shallow lens profile (VDE at T00) Ø *Final suffix (X) - ong barrier *Final suffix (Y) - Short barrier *Final suffix () - For ires () 0569 A Call factory max Ø (C) 0273 OO 9.0 max Ø (C) 0278 OO 9.0 max Sq

3 TERM TYPE PANE & C IUMINATION (C) 0276 AA 9.5 (C) 0275 OO Ø (C) 0275 OO (C) 0276 OO max.5 max Ø Ø3.3 Ø max Ø 33.7 (C) 0277 OO 4.9 max Ø (C) 0273 For sub-panel mounting, behind a facia Ø

4 Indicator ights (Neon, ED and Filament amp) Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 00/30V (marked 0V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, hite /2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, hite 0-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 2/4V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 6.3mm dia Red, amber, green and clear lenses Red, yellow, green, blue and white EDs ide choice of styles U file E63363 CSA file / R2938 Approvals shown for neon versions only TERM TYPE PANE & C IUMINATION (C) 2820 OO Ø3.6 (C) 282 OO or ø = ø = Ø4.5 (C) 0586 OO Sq (C) 2870 OO Ø3.6 (C) 0589 OO Ø OO 9.5 Ø Ø8.3

5 TERM TYPE PANE & C IUMINATION (C) 077 OO 4.9 max Ø4.6 (C) 0067 OO max Ø6.0 (C) 080AA 9.0max Ø5.0 Starlock fixing (C) 080BB Ø6.3 (C) 0579 OO max Ø5.9 7

6 Indicator ights (Neon, ED and Filament amp) Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 00/30V (marked 0V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, hite /2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, hite 0-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 2/4V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 6.3mm dia Red, amber, green and clear lenses Red, yellow, green, blue and white EDs ide choice of styles U file E63363 CSA file / Approvals shown for neon versions only TERM TYPE PANE & C IUMINATION H 058 AY 8.2/8.3 x 6.2/6.3* OO 3.0x (C) 096 AA 3.0x OO 9.27/9.50 x 4.75* Red & Amber 0233 OO M068 Red only 60.0 Ø6.4 Neon tube, resistor and flexible lead assembly, protected by shrunk on transparent sleeving. 72

7 Indicator ights (To match 8500, 8600, R3, 500, 550, 5500, 6000, 8300 and 7000 switches) Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 00/30V (marked 0V), 200/250V (marked 230V) Filament lamp Available with Red, Amber or Green lenses 6V, 2/4V, 24/28V Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon or filament lamp. Indicator lights Neon or filament lamp Bezel sizes from 6.7 to 6.3mm dia Red, amber green and clear neons Red, amber and green filament lamps Styles to match rocker and push switches U file E63363 CSA file R2938 Approvals shown for neon versions only TERM TYPE H8580 AB Full product details on pages 0- Cut-out Flange Body Panel Cut-out Code thickness X Y B / / / / / /3.0 Y X T X H8630 FB Full product details on pages 2-3 Cut-out Flange Body Panel Cut-out Code thickness X Y B / / / / / /3.0 Y X R9 92B Full product details on pages 29 Cut-out Flange Snap fixing in panels thickness up to Approvals details - contact the factory Ø Ø23.0 T U C0430 A(*) C6030 A body & C terminals only Full product details on pages 6-7 & 20-2 Body Cut-out Flange *Code Y X Y X A 2.2/ / B.0/. 30.0/ /. 30.0/ R 4.0/ / T.5/ / Cut-out Y X Flange Y X T U C0480 A(*) Full product details on pages Body Cut-out Flange *Code Y X Y X A 22.3/ / B 22./ / / / R 23.0/ / T 22.3/ / Cut-out Y X Flange Y X C7030 AH Full product details on pages 40-4 Cut-out Flange Body Cut-out Flange Code H Ø25.0/25.2 Ø2 25.0/25.2 Ø2 73

8 Neon & ED Indicator ights Sealed to IP52 and IP54 Colours and voltages: Neon Red, Amber, Green 20 or 230Vac please specify (Red base) ED Red, Amber, Green 28Vac/dc (Green base) Neon versions feature integral current limiting & ghost lighting resistors. ED versions have rectifier diodes & resistors for direct connection to 28Vac/dc. To order Select a number from the type column, then state: ens colour, voltage and whether neon or ED. All versions have recessed screw terminals. IP52 is standard. A panel sealing washer is available for IP54. IP52 and IP54 sealing Three bezel sizes:, 20.5 and 30.0 dia. Neon or ED indicator Black and satin chrome bezel or without bezel Recessed screw terminals Approval shown for neon versions only TERM TYPE PANE & C Recessed Screw 330 No bezel 3.2 max Ø3.0 T20 neon T50 ED Ø Recessed Screw 360 Black bezel max Ø6.0 T20 neon T50 ED Ø20.5 Recessed Screw 36 Satin chrome style bezel max Ø6.0 T55 neon T50 ED Ø20.5 Recessed Screw 322 arge black bezel max Ø2 T20 neon T50 ED Ø30.0 Select the version most suitable for your application from the 4 types shown. Or call the factory for availability to your special requirements. 74

9 Colour and voltage: These lampholders are suitable for up to 50V max. Bulbs will be supplied (dependent on order quantity) if a voltage is specified. Colours - Red, Amber, Green, (Clear & Blue, check availability). Refer to the 2 columns below (terminal and type), then state: ens colour and voltage. Up to 50V Red, Amber, Green, Blue and Clear inestra/philinea lamp holder ow Voltage ampholders TERM TYPE PANE & C T T006 AO (ES) Ø Rear of panel bulb replacement 6 C0067 OO (BA7s).4max Rear of panel bulb replacement Ø6.0 T T0062 AO (Midget flange) 9.6max T0063 AO (ES) Ø4.7 Front of panel bulb replacement T T0062 MO (Midget flange) 9.6max T0063 MO (ES) Ø4.7 Front of panel bulb replacement S S0095 OO amp 4.7mm CS Hole Holders Paired Architectural lampholders for inestra or Philinea lamp. 75

10 ED amps and ED ampholders ED ampholders can be supplied with or without EDs Colours: Red, Yellow, Green and Blue EDs (High Intensity is standard. Option of extra super bright). ED lampholders Supplied with or without EDs Voltages: EDs are available for direct connection to /2.2V or 2Vdc For other voltages contact the factory. Black or Chrome finish Refer to the 2 columns below (terminal and type), then state: ED colour and voltage and body finish (Black or Chrome). TERM TYPE PANE & C ED fitted () 047 OO 6.3 A ED not fitted 3mm ED 6.3max Ø OO max.5 ED & ires fitted 3mm ED 3.9 Ø7.6 ED fitted () 048 OO A ED not fitted 5mm ED 5.5max 4.5 Ø OO 5.5max ED & ires fitted 5mm ED 4.5 Ø9.5 ED fitted () 050 OO A ED not fitted 5mm ED with focusing reflector 7.0max Ø 050 OO 76 ED & ires fitted 5mm ED with focusing reflector 7.0max Ø

11 Colours: Voltages: ED amps and ED ampholders - Designed to IP66 ED ampholders can be supplied with or without EDs Red, Yellow Green and Blue EDs. (High Intensity is standard. Option of extra super bright). EDs are available for direct connection to /2.2V or 2Vdc. For other voltages contact the factory. IP66 front bezel sealing ED lampholders Supplied with or without EDs Black or Chrome finish Refer to the 2 columns below (terminal and type), then state: ED colour and voltage and body finish (Black or Chrome). TERM TYPE PANE & C ED fitted () 048 OA Designed to IP66.0 A ED not fitted 5mm ED 5.5max Ø OA Designed to IP66.0 ED & ires fitted 5mm ED 5.5max Ø 9.5 ED fitted () 050 OA Designed to IP66.0 A ED not fitted 5mm ED with focusing reflector 7.0max Ø 050 OA Designed to IP max ED & ires fitted 5mm ED with focusing reflector Ø Properties Sealing O-ring sealing equivalent to IP66, of both the ED to bezel, and bezel to panel is available where shown. Polarity The nylon base mouldings are polarity marked. ED wires or PVC covered wire leads 25mm min length wires, 6.3mm standard strip. Alternative colours, length and strip available. Body Material and Finish Chromed brass or Black oxide coated brass. ampholders only Items prefixed A are supplied without EDs. 77

12 ow Voltage ampholders with sealing option Up to 50V MES or MBC bulb Flat and domed lens Brass or nylon bodies Red, Amber, Green, Blue and Clear lenses Front panel seal option by 3rd qtr 2005 Bulbs will be supplied (dependant on order quantity) if a voltage is specified. These lampholders are suitable for up to 50V max. Colours - Red, Amber, Green, (Clear & Blue, check availability). Brass bodies have polished chrome finish. C090FP C 090 F A TERMINA AMP CAP ENS BODY VOTAGE, COOUR, ETC TERMINA AMP CAP ENS THREADED BODY DIMENSIONS mm C 090 E0 F Flat Panel Body Dimension Hole Dia. Material A for E0 types A 9.0 Brass 35.0 A D 9.0 Brass 30.2 E 9.0 Nylon 30.2 V Domed *P 9.0 Nylon (+ chrome trim) x BA9s No lens G 9.0 Brass 24.6 H 9.0 Nylon 24.6 Panel Body Dimension Hole Dia. Material A for BA9s types B 9.0 Brass 35.0 Sealing Neoprene washers to seal between bezel and panel (23) and lens and bezel (24) to give a seal equivalent to IP66 are available on most versions. F0445 MO P.V.C. Insulating terminal cover. C 9.0 Nylon 35.0 *Q 9.0 Nylon (+ chrome trim) 35.0 All E0 and BA9s types are suitable for panel thickness up to 6.2mm. Some versions will accept panels up to.2mm thick. *Note P and Q body codes denote a nylon body fitted with a chrome bezel trim (previously F043PO). 78

13 Technical Information - Indicators The majority of Arcolectric indicator lights can be supplied with alternative light sources: Neon, Fluorescent, Filament lamp or ED. NEON and FUORESCENT AMPS Colours Available with Red, Amber, Green or Clear lenses. Maximum striking voltages Standard brightness types 65Vac 90Vdc. High brightness types 85Vac 35Vdc. High brightness types are usually fitted. ife Typically 25,000 hours (Green fluorescent lamps 20,000 hours). (Measured to a point when the light output of the lamp is half its original level.) The end of life for a neon lamp is not usually a sudden failure. False signals due to long wiring It is possible for neon or fluorescent tubes to glow when they should be off. The false signal is caused by the capacitance effect of fairly long wiring to the indicator being adjacent to other live cables. This effect can be prevented in most cases by fitting a 00k resistor across the supply wires close to the indicator assembly. FIAMENT AMPS Colours Available with Red, Amber, Green, Clear or Blue lenses. EDs - Colours Red, Yellow, Green, Blue and hite. Voltage Basic voltage /2.2V. Some items are available with integral resistors for 2V use. For details of resistors required for higher voltages, please call the factory. Current Maximum continuous forward current 20mA. ife >00,000hrs EDs - Colours Red, Yellow, Green, Blue and hite. Voltage Rated up to 230V ac, suitable for use at 0V and 230V ac. Current <3mA MATERIAS Moulded bodies and bases Nylon 6.6 Metal bodies and bezels Chrome plated brass (except #) enses Polycarbonate Terminals (most types) Brass (electro-tin plated) Terminals (exceptions) Brass (flash silver* or nickel** plated) Threaded metal nuts Brass (nickel plated on 0275/7) Other fixings Call factory for details * R9, 006, 0062, 0430, 0480, 090, 09, 6030, 7030, 8630, 8580 ** # 330, 360, 36, 322 have nickel plated terminals with steel screws and plated polyamide bezel trims ife >00,000hrs TEMPERATURE RATING Authority European U with Terminals T25 C T65/75 C with ire leads PVC SIICONE T05 C T25 C T65/75 C SYMBOS Terminals ire leads Solid wires Panel hole size Panel thickness Temperature rating,, 200mm long Standard ED only 66