Special tools. For all industries

Size: px
Start display at page:

Download "Special tools. For all industries"

Transcription

1 Special tools For all industries

2 Content Content Chassis/Axles 3 19 Brakes Engine Wheels/Tires Body Universal Commercial vehicles: Mercedes MAN DAF Scania Volvo Iveco Renault Vans Trailers: Schmitz Cargobull Krone Kögel Fliegl Also suitable for passenger cars, buses and agricultural machinery. 2 SPECIAL TOOLS

3 CHASSIS BALL JOINT STUD REMOVER SET, 3-PIECE For passenger cars and vans, in case. To remove ball joint studs from tie rods, steering knuckles, and stabilizers, incl. reinforced version for vans. Especially suitable for work in hard-to-reach places. Suitable for: Audi, VW, BMW, Citroen Jumper, Fiat Ducato, Peugeot Boxer, MB Sprinter, Renault, Rover, Saab, Volvo, buses, agricultural machinery Art. no Also available individually: BALL JOINT STUD REMOVER To remove ball joint studs from tie rods, steering knuckles, and stabilizers, incl. reinforced version for vans. Especially suitable for work in hard-to-reach places. Jaw opening Suitable for Art. No. PU 23 x 55 mm Audi, VW, BMW, Citroen Jumper, Fiat Ducato, Peugeot Boxer, MB Sprinter, Renault, Rover, Saab, Volvo, various Japanese passenger car brands, agricultural machinery x 55 mm Audi A4, A6, A8, VW Passat models from 1997 and Mercedes Benz, agricultural machinery 34 x 63 mm MB Sprinter, VW LT, Opel Movano, agricultural machinery, etc SPECIAL TOOLS 3

4 CHASSIS DRIVE SHAFT SOCKET CV 41 MM HEX, ¾" DRIVE Especially adapted, impact-resistant design. For the removal and mounting of Cardan shafts. Suitable for: Citroen C25, Fiat Ducato, Peugeot J5, agricultural machinery Art. no AXLE NUT SOCKET CV 57 MM BIHEX, ¾" DRIVE Length 70 mm Suitable for: Ford Transit from 1991, axle no. 34, agricultural machinery Art. no DRIVE SHAFT SOCKET SET 6-PIECE, ½" DRIVE, BIHEX + HEX Impact wrench design consisting of: deep impact sockets sizes 30, 32, 36 mm (bihex) and impact screwdriver bits 14, 17, 19 mm (hex bits) for drive shafts. Suitable for: Any type of vehicle, agricultural machinery Art. no DRIVE SHAFT IMPACT SOCKET SET 9-PIECE, ½" DRIVE, BIHEX + HEX Thin-walled version of art. no Profile and single-piece extra-short screwdriver bits. For removal and mounting. Scope of delivery: Size 24, 27, 30, 32, 34, 36 x 85 mm (bihex socket); Size 14, 17, 19 x 43 mm (hex screwdriver bit) Suitable for: VW (Golf IV - Polo - Passat etc.), Audi, Seat, Skoda, Opel, BMW, Mercedes, Renault, Toyota, agricultural machinery Art. no SPECIAL TOOLS

5 CHASSIS GROOVE LOCK NUT SOCKET, REAR AXLE ¾" DRIVE, 6 STUDS Length x width: 52 x 8 mm Inner stud Ø 61 mm Inner Ø of base body 50 mm Outer Ø 70 mm For rear axles Suitable for: VW LT, MB Sprinter 412 D Art. no BALL JOINT SEPARATOR Heavy-duty design, ruggedized and workshop-tested For pressing out ball joint studs With hydraulic pressure spindle 10t Studs Jaw sizes Maximum load Suitable for Art. No. PU mm Max. 90 mm 12 t MB, e.g. ATEGO up to 17t, MAN M 2000, Iveco, Renault, Scania, Volvo, DAF. Vans, e.g. VW T4, Ford Transit, MB Sprinter, Fiat Ducato, heavy-duty passenger cars, e.g. off-road vehicles mm Max. 115 mm 20 t MB, e.g. Actros, Atego from 18t, SK, O405, O405 - N (low-floor bus), MAN F 2000, TGA, low-floor articulated bus, Iveco Eurostar, Eurotech, Turbostar, Scania series 3 and 4, coaches on Scania chassis such as Icarus, DAF, Renault, Volvo PULLER FOR TIE ROD ENDS BELL SHAPE 1 2 Fig. Jaw opening Max. height Surface Drive Weight Application Type Art. No. PU 1 30 mm 58 mm Burnished Hex 19 mm 1.10 kg Bolt suitable for impact Light trucks t mm 90 mm Hex 26 mm 2.5 kg screwdrivers, pressure piece rotates on bolt. 39 mm 58 mm Hex 26 mm 3.85 kg Trucks, e.g. MB 1424, Actros2 SPECIAL TOOLS 5

6 CHASSIS AXLE NUT SOCKET, FLAT OVAL 36 MM HEX DRIVE, HEAVY-DUTY DESIGN For flat-oval axle nuts on BPW axles and ECO axle. Size Suitable for Art. No. PU 65 mm BPW axles, ECO axle 9, 10, 12t mm BPW axles, ECO axle 9, 10, 12t HUB CAP AND AXLE NUT SOCKET ¾" / 1" DRIVE, IMPACT NUT For removal/mounting of flat-oval hub cap nuts and axle nuts. Size Suitable for Art. No. PU ¾"/95 mm BPW axles 9t, 12t/10t ECO axle "/110 mm BPW axle 12t HUB CAP AND AXLE NUT SOCKET, FLAT OVAL ¾" DRIVE, IMPACT SOCKET For flat-oval grease caps. Size Suitable for Art. No. PU 65 mm BPW axles 9t, 12t and 10t ECO axle mm mm BPW axle 13 t ECO front axle mm BPW axle 9t mm BPW axle 12 t mm BPW-ECO axle AXLE NUT SOCKET CV ¾" DRIVE, 80 MM, OCTAGON, IMPACT SOCKET Suitable for: MAN, DAF 106, Scania 124 I 144 I etc. Art. no SPECIAL TOOLS

7 CHASSIS AXLE NUT SOCKET WITH OR W/O GUIDE BAND 36 MM, HEX DRIVE, HEAVY-DUTY DESIGN For rear-axle hubs with brake drums and wheels. Fig. Size Suitable for Art. No. PU 1 85 mm SAF trailer axles mm IVECO - Cargo rear axle mm DC trailer axle Dicos Trailers from 2005 with compact bearing HUB unit (DB no. W ) mm IVECO Euro Cargo - rear axle type 120 E15 98 with double nut mm Kässbohrer/Setra coaches Without guide band AXLE NUT SOCKET HEXAGON AND OCTAGON Fig. Drive Size Suitable for Art. No. PU 1 ¾"/square 77 mm/hex Renault ¾"/square 80 mm/hex DAF/Volvo ¾"/square 95 mm/hex Volvo ¾"/square 105 mm/hex Volvo ¾"/square 95 mm/octagon Scania ¾"/square 100 mm/octagon Scania ¾"/square 115 mm/octagon DAF/Volvo SPECIAL TOOLS 7

8 CHASSIS AXLE NUT SOCKET CV ¾" DRIVE, 95 MM HEX Suitable for: IVECO EUROCARGO Art. no AXLE NUT SOCKET WITH GUIDE BAND FOR USE WITH 36 MM HEX SOCKET, 110 MM BIHEX Suitable for: IVECO Eurotech - Cursor, Stralis rear axle Art. no AXLE NUT SOCKET ¾" DRIVE, 205 MM, OCTAGON Heavy-duty version for removal/mounting of dust caps and axle nuts. Size Suitable for Art. No. PU 60 mm Any type of truck/commercial vehicle mm mm mm Scania axle nut 124 L/144 L VA mm Any type of truck/commercial vehicle mm mm mm mm mm mm VA Volvo FH 12 and FH 16 models from SPECIAL TOOLS

9 CHASSIS AXLE NUT SOCKET FOR USE WITH 46 MM HEX SOCKET, 140 MM HEX Impact design for rotation-angle-monitored tightening, 32 mm drive for pre-tightening. Suitable for: SAF axles, 9t RSM 9042, SKRS/RZ 9042, 11242, 9037, Art. no GROOVE LOCK NUT SOCKET ¾" DRIVE Stud width No. of studs Inner Suitable for Art. No. PU 7.5 mm 4 52/60 mm MB M Class; front and rear axle mm / 70 mm MB Actros, Atego (heavy-duty design) LN2, SK rear axle 740,0/ HD 7/19 DG 13, HD4/ mm / mm MAN-TGA front axle, V9-82L-01 (disc brakes with ABS) * 1 * with additional 60 mm hex BEARING SHELL ASSEMBLY KIT For the exact and centered removal and mounting of bearing shells, especially for mounting tapered roller bearings in wheel hubs without jamming them. The specially shaped jaws are spread by an adjustment bolt for optimal placing. This allows for damage-free mounting without jamming. Robust forged design, can be disassembled easily. Also suitable for use in the workshop press. Working range Ø mm. Suitable for: Passenger cars, vans, commercial vehicles, buses, agricultural and construction machinery, mechanical and plant engineering Art. no SPECIAL TOOLS 9

10 CHASSIS IMPACT SOCKET ¾" DRIVE, 27 MM BIHEX Length 112 mm Burnished for spring U bolt connections Suitable for: MB - trucks, Actros with air suspension, agricultural machinery Art. no DEEP IMPACT SOCKET ¾" DRIVE, E24, 110 MM Heavy-duty version for works on axles and brakes. Suitable for: Universal Art. no IMPACT SCREWDRIVER BIT ¾" DRIVE, 17 MM HEX For removal and mounting of the retaining screw of the upper control arm of the rear axle. Length 170 mm For hex socket screws Suitable for: MAN TGA and F2000, Citaro, MB Actros Art. no SPECIAL TOOLS

11 CHASSIS GROOVE LOCK NUT SOCKET SET MAN TGA For rear axles, with guide tube and base body Drive ¾", 60 mm hex With 6 inner studs 11.5 mm Dimensions inner stud - inner stud: mm Dimensions inner edge- inner edge: mm Total length: mm Suitable for: MAN-TGA rear axle, e.g., HY 1350 Base body Art. no Guide tube Art. no GUIDE TUBE For TGA rear axle groove lock nut socket/base body art. no Ø mm, length 140 mm Suitable for: MAN-TGA rear axle Art. no ASSEMBLY SLEEVE For MB/MAN rear axles. Outer Ø 76 mm With internal thread M 75 x 1.5 Length 185 mm Suitable for: Rear axle HL2 in MAN L series and MB Atego and Vario Art. no SPECIAL TOOLS 11

12 CHASSIS EXTENSION TUBE FOR REAR AXLE For TGA axles Length 360 mm, knurled Outer Ø 105 mm With internal thread to guide the bearing for mounting on the rear axle Thread size M 100 x 1.5 mm Suitable for: MAN rear axle HY 1350 Art. no Further groove nuts sets, base bodies and guide tubes available for the following makes: Mercedes hypoid rear axle, HL2/2, HL2/3, HL2/5, HL2/9, HL2/11, HL2/12, HL2/15, MB hypoid rear axle HL 2/14, KL2/16, KL4/1, HL4/16, HL4/17, HL4/23, HL4/28-HL4/30, HL4/4, HL4/8, HD4/6G, HO4/2, HO4/1, HO4/18 Nr. 4/4, MB hypoid axle HO 4/10, HO 4/10DL, HO 4/11DL, HO 5/3, HO 5/4, HO 5/8, HD 4/21G, HD 4/2G, HD 4/22, HD 5/3, HL 5/2, HL 5/6, MB hypoid axle HO 5/5, HL 4/01, HL4/05, HL4/06, HD4/02, HD4/03, MB palloid front axle AL 3/6, AL 3/9, MB trailing rocker shaft axles NS4/2, NS4/10, and for pinion axles HL6/1, HL6/2, HL6/3, HD6/3, MAN - VW 8.138, 8.150, 9.136, L2000, MAN hypoid (banjo-type) rear axles of the G series VW2, VW4, VW6.1, VW 6.8, MB hypoid rear axle HL2/2, HL2/7, HL2/13, MAN front axle (front drive) M series - 3 ME DI and planetary hub reduction rear axle 5 MR, 3 MR GROOVE LOCK NUT SET REAR AXLE COMMERCIAL VEHICLES ¾" DRIVE With exchangeable guide tube for removal and mounting works on the rear axle. Studs: 6, Stud width: 10.0 mm Inner Ø base body: 87.0 mm Length 65 mm Art. no Suitable accessories: Description Type Art. No. PU Base body of groove lock nut socket w/o guide tubes MAN, MB Atego rear axle Guide tube outer Ø 49 mm, length 140 mm (pinion shafts) HL2, Guide tube outer Ø 57 mm, length 140 mm Vitaro SPECIAL TOOLS

13 CHASSIS GROOVE LOCK NUT SET FRONT AXLE/REAR AXLE COMMERCIAL VEHICLES ¾" DRIVE With exchangeable guide tube for removal and mounting works on the front and rear axle. Studs: 6, Stud width: 11.4 mm Inner Ø base body: mm Length 140 mm Art. no Suitable accessories: Description Type Art. No. PU Base body of socket "without" guide tubes MAN planetary hub reduction Guide tube outer Ø 51.5 mm, length 135 mm rear axle F series H7, HD7 and front axles F series Guide tube outer Ø 66.5 mm, length 135 mm Hypoid rear axles F series HY-1175, HDY-1175, HY , HY GROOVE LOCK NUT SET COMMERCIAL VEHICLES ¾" DRIVE With exchangeable guide tube for removal and mounting works on the front and rear axle. Studs: 6, Stud width: 9.8 mm Inner Ø base body: 117 mm Suitable accessories: Description Type Art. No. PU Base body of socket "without" guide tubes MB Actros rear axle, HL, Guide tube outer Ø 60 mm, length 185 mm HL 8 (hypoid axle) GROOVE LOCK NUT SET REAR AXLE COMMERCIAL VEHICLES ¾" DRIVE With exchangeable guide tube for removal and mounting works on the front and rear axle. Studs: 12, Stud width: 11.4 mm Inner Ø base body: mm Suitable accessories: Description Type Art. No. PU Base body groove lock nut socket "without" guide tube MB planetary hub reduction rear axle; tag axle NR 7/4 Guide tube outer Ø 50 mm, length 135 mm MB planetary hub reduction rear axle (European Guide tube outer Ø 51 mm, length 85 mm axles) 10t and 13t, HL7/0, Guide tube outer Ø 53 mm, length 135 mm HL7/1, HL7/2, HL7/3, HL7/18, HO7/8, HO7/9, HL7/015, HL7/021, HD7/2, HD7/19DG, HD7/016DG, MB hub reduction axle 7t: AL7/1 SPECIAL TOOLS 13

14 CHASSIS TIE ROD WRENCH SET ½" DRIVE WITH ADDITIONAL 30 MM HEX Self-clamping adapters for the safe and damagefree removal and mounting of almost all types of tie rods also in enclosed spaces. Scope of delivery: Tool mount with ½" square socket and 30 mm hex head, length 435 mm; two interchangeable adapters Ø mm and mm Suitable for: Passenger cars/vans Art. no Please refer to the manufacturer's specifications on how to use with torque wrench. CLAMP NUT WRENCH ½" + ¾" DRIVE For clamp nuts on steering knuckles. Size Type Suitable for Art. No. PU 32 x 36 1 Light trucks MB, 200 and 300 series x 50 2 MB commercial vehicle axles: VL /7-8, VL 1/3, 5, 6, 7, VL 1/4, from 1979, VL /8, 9, 10, VL 2/5, 6, 7, 8, 9, VL 2/10, 1013 S-K, 1017 S-K, e.g., Atego x 52 3 MAN/VW G series, axle V7-26l-36L, types and x 62 4 MB commercial vehicle axles: VL 2/11 in type 814 (new lightweight series) 54 x 68 5 Mercedes SETRA bus S 215 HDH from 1990, NEOPLAN bus from x 71 ¾" drive 60 x 76 ¾" drive 6 DAF, Kässbohrer Setra, MAN, MB axles: VL 3/8, 13, VO 3/10, VL 4/7, 9, 10 VD 4/14, VO 4/11, 13, 18, VL 4/15, 16, 19, VD 4/20 MB series: 36, 385, 387, 389, 391, 393, 395, 617, 620, 621, 622, 623, 625, 649, VO 3/10, 4/11, 13, 19 omnibus, 0303, 0305-G, 0305, Kässbohrer Setra: front axle 6.5t + 7.5t S series, SG , trailing axle S216 HDS, S228 DT 7 MAN and MB, reinforced 9t front axle VL5, MB SK front axle VL 5/1 D-9, VL 5/2 D-9, 2629 series/6x4, 2635 K/6x4, 3535 K8/x4/4, e.g., Actros with disc brakes, as well as FAUST front axle SPECIAL TOOLS

15 CHASSIS UNIVERSAL AXLE AND GROOVE NUT WRENCH HEAVY-DUTY DESIGN For the removal and mounting of axle nuts or grease caps, e.g., on truck or trailer wheel hubs. Suitable for octagon or hex nuts, groove nuts, face nuts, round nuts with drilled holes, capstan nuts, etc. Wrench with ¾" drive. Clamping range hex: mm Clamping range groove nut: mm Tightening torques of up to 700Nm possible. Scope of delivery: 1x axle and groove nut wrench, 2x adapters, round, 6 mm, 2x adapters, round, 8 mm, 2x adapters, round, 10 mm, 2x adapters, square, 6 mm, 2x adapters, square, 8 mm, 2x adapters, square, 10 mm, 1x tension chain, 1x pin key Tools delivered in plastic foam insert Art. no INSERTION TOOL Description Type Art. No. PU Dimensions Fig. Design 1 Shaft seal insertion tool for cassette seal A MB Actros front axle rear axle /30 MB front axle + tag axle ABS Design 2 Shaft seal insertion tool for sealing rings in the wheel hub Planetary hub reduction rear axle MB truck HL 7/1, HL 7/3, HL 7/18, HL 7/07, HL 7/015, HL 7/021, HD 7/2, HD 7/19DG, HD 7/01DG, HO 7/8 Series: 1219, 1413, 1417, 1419, 1424, 1617, 1619, 1621, 1624, 1926, 2219, 2226, 2626, Design 3 Shaft seal insertion tool for planetary hub reduction axles equipped with ABS and simple shaft seal in tone ring For MB, MAN, DAF and other Design 4 Insertion tool for tone ring without shaft seal on MB Actros MB Actros front axle with ABS and disc brakes, e.g., axle no For tone rings without shaft seal! SPECIAL TOOLS 15

16 CHASSIS PNEUMATIC HYDRAULIC PUMP WITH QUICK-RELEASE COUPLING ¼" NPT Pressure 700 bar 1 liter volume 2.20 m pivoted hose Suitable for: Hydraulic cylinder set 16t, 22t, 32t Art. no Using the pump allows for the hydraulic tools to be operated by a single person. With matching quick-release coupling and return stop. HYDRAULIC CYLINDER SET 32T For pushing and pulling, with an operating range of approx. 113 mm. The special design allows for hitting the tie rod inserted into the piston rod while pressing to increase the loosening torque, e.g., for corroded or glued components Spindle for pulling and pressing are integrated into the piston rod A compact hydraulic unit of low weight (8.5kg) Universal tool kit for pressing out and pulling in steering knuckle bolts, joint bolts and silent blocks. Accessories included in delivery: Thread protection ring, pressure spindle M24 x 3, tie rod M22 x 2.5, nut M22 x 2.5 Suitable for: Commercial vehicles, buses, agricultural machinery, plant engineering, mechanical engineering Art. no SPECIAL TOOLS

17 CHASSIS UNIVERSAL TOOL KIT For pressing out and inserting steering knuckle bolts, joint bolts and silent blocks. This kit contains all press sleeves and pieces required for works on steering knuckle bolts, joint bolts and silent blocks (also tapered types) and is suitable for most vehicles and agricultural machinery available on the market. Delivery does not include pneumatic hydraulic pump, art. no nor hydraulic cylinder set 32t, art. no ! Inside frame height 500 mm Clamping range 130, 210, 295 mm Push rods 140 x Ø 31 mm, 250 x Ø 31 mm Press piece, impact adapter, step plate to mount the pressure pipes Pressure pipes Length Inside Ø Outside/offset Ø 42 mm mm 65 mm 145 mm mm 65 mm 42 mm mm 80/90 mm 130 mm mm 80/90 mm Suitable for: Any type of commercial vehicle, buses, agricultural machinery, construction machines, plant engineering, mechanical engineering Tool kit without case Art. no Tool kit including sturdy plastic case Art. no Have a look yourself: universal-werkzeugsatz Sample application of hydraulic cylinder set 32t on steering knuckle bolts, joint bolts and silent blocks SPECIAL TOOLS 17

18 CHASSIS UNIVERSAL SILENT BLOCK SET 36- OR 44-PIECE Tool kit for pulling out and in, e.g., silent blocks, anti-vibration mountings, bushes, ball bearings, shaft seals. Due to the different diameters of the pressure sleeves and matching adapters, the tool can be easily adjusted to different diameters. If required, the different sleeves can also be reshaped individually. The spindles included allow for mechanical use of the tool kit. Guide adapter and bearing ensure a safe and smooth operation. In many cases the support and pressure sleeves can also be used together with the 22t hydraulic cylinder, art. no , and the pneumatic hydraulic pump, art. no In combination with the workshop press, only the pressure sleeves and adapters are used. Delivery in high-quality blow-molded case. Operation with workshop press Suitable for: Passenger cars, commercial vehicles, buses, agricultural and construction machinery, also suitable for SUV/off-road vehicles, e.g., BMW X3, X5, X6, MB M series, Porsche Cayenne, VW Touareg Hydraulic operation with spindle 36-piece Inside Ø mm Art. no Mechanical operation with spindle 44-piece Inside Ø mm Art. no Hydraulic cylinder set 22t For pushing and pulling, with an operating range of 70 mm Art. no SPECIAL TOOLS

19 CHASSIS UNIVERSAL COMPACT WHEEL BEARING MOUNTING TOOL Suitable for all vehicle types. For the quick, precise and damage-free mounting of compact wheel bearings. Due to its shape, the universal mounting tool can be used mechanically with a spindle, with any common hydraulic cylinder and with an arbor press. With the adjustable jaws, the tool can be quickly mounted on any compact wheel bearing diameter. Type: Can be used universally for passenger cars such as VW, Audi, Seat, Skoda, Ford, Mazda, Porsche, Volvo etc. For compact wheel bearings with a diameter of the outer bearing ring of Ø 50 mm to Ø 80 mm max. Also suitable for VW T5, VW Touareg, Porsche Cayenne, VW Crafter and MB Sprinter from Without hydraulic cylinder and spindle Art. no Sample application with spindle and open bell Compact wheel bearing bell mounted VW T5 Polo 9N Lupo Sample application with spindle and hydraulic cylinder SPECIAL TOOLS 19

20 BRAKES IMPACT SCREWDRIVER BIT ¾" DRIVE, 14 MM HEX BIT, 170 MM For hexagon socket screws. For the removal and installation of brake caliper screws on the rear axle. Suitable for: MB Actros, Citaro with HL7 + HL8 axles Hypoid Neoplan ZF and TGA wheel hubs. Art. no IMPACT SCREWDRIVER BIT ¾" DRIVE, XZN M16 X 80 MM For the removal and installation of the rear brake caliper and flywheel screws. Suitable for: VW Touareg, Mercedes Benz Atego flywheel Art. no SPECIAL TOOLS

21 BRAKES DEEP IMPACT SOCKET ¾" DRIVE, E 22 X 110 MM Designed for axles and brakes, heavy-duty version for highest demands. Suitable for: Any type of commercial vehicle Art. no (size E24 on page 10) AIR FILTER CARTRIDGE WRENCH, THREE-LEGGED ½" DRIVE For desiccant air drier cartridges of truck brakes Adjusts from mm Milled, black oxide finish Suitable for: Any type of commercial vehicle or agricultural machinery Art. no DAF RING STRIKING WRENCH 26 MM, LENGTH 160 MM For loosening the brake caliper when changing the brake discs. Suitable for: DAF trucks XF95 and XF105 Art. no SPECIAL TOOLS 21

22 BRAKES BRAKE CALIPER WRENCH ¾" DRIVE, BIHEX, 340 MM For the removal and installation of front caliper screws. Size Suitable for Art. no. PU 24 mm MB Atego and Actros mm MB Atego and Actros, Kässbohrer buses BRAKE DISC THICKNESS GAUGE, 0-50 MM STAINLESS STEEL, MATT FINISH, CHROME- PLATED Designed to measure the thickness of brake discs while still installed Certified according to DIN 862 Hardened, with retaining screw Suitable for: Vans, agricultural machinery Art. no BRAKE PISTON RETRACTOR SOCKET, STEEL VERSION 12 MM HEX DRIVE WITH MAGNET To reset (retract) the automatic brake piston adjustment when changing brake pads or making other repairs to the brake caliper. Suitable for: SAF, KNORR brake calipers on commercial vehicles Size Art. no. PU 8mm/square socket mm/hex socket mm/hex socket mm/triple square socket SPECIAL TOOLS

23 BRAKES BRAKE SHOE SPRING PLIERS HARDENDED, 500 MM Heavy-duty version For riveted and bonded brake shoes, for the removal of drum shoe return springs Suitable for: Any type of commercial vehicle or agricultural machinery Art. no GREASE CAP PLIERS For the simple and safe removal of axle grease caps. Maximum width 75 mm Length 280 mm Suitable for: Cars, vans, trailers and agricultural machinery Art. no BRAKE CALIPER HEX SOCKET FOR MAN Special extra short version, 30 mm external hex drive with spring ball retention Length 40 mm For the removal and installation of brake caliper screws without removal of the steering knuckle arm E20 for MAN TGM/Atego 9 t Art. no E24 for MAN TGM/Atego 12 t Art. no SPECIAL TOOLS 23

24 BRAKES BRAKE PISTON SPREADER Size of spreader plates: Width 100 mm, height 60 mm, thickness 7.5 mm Suitable for: Vans and light commercial vehicles Art. no SELF-LOCKING PLIERS FOR POLYAMIDE BRAKE HOSES For the installation of polyamide brake hoses Suitable for: Any type of commercial vehicle, Mercedes Benz*, trailers Ø Art. no. PU mm * mm mm BRAKE HOSE CUTTER FOR PLASTIC HOSES AND PROFILES Max. diameter: 25 mm, 175 mm length Suitable for: Any type of commercial vehicle Art. no SPECIAL TOOLS

25 ENGINE CYLINDER HEAD WRENCH CV ¾" DRIVE, BIHEX, NOT OFFSET, IMPACT DESIGN For loosening and tightening cylinder head bolts of commercial vehicles. Suitable for: Mercedes-Benz, MAN Size Length Art. no. PU 17 mm 110 mm mm 110 mm CYLINDER HEAD WRENCH CV ½" DRIVE, E 20, IMPACT DESIGN For loosening and tightening cylinder head bolts. Length: 132 mm Suitable for: MAN models F2000/F90/F8 and buses with D25/D28 engines (MAN no ) Art. no SPECIAL TOOLS 25

26 ENGINE CYLINDER HEAD WRENCH CV ¾" DRIVE, 110 MM, NOT OFFSET, IMPACT DESIGN For loosening and tightening cylinder head bolts of commercial vehicles. Size Suitable for Art. no. PU E18 MAN model M 2000 and buses with D08 engines E20 MAN models F8, F90, F2000 and buses with D25/D28 engines, TGA GROOVE LOCK NUT SOCKET SET CV ½" DRIVE, 4-PIECE For tightening the pressure screw on the nozzle holder. Suitable for: MAN, any type of Mercedes-Benz truck Art. no GROOVE LOCK NUT SOCKET CV ½" DRIVE, WITH 4 STUDS, 70 MM For loosening and tightening the pressure screw on the nozzle holder. 8 mm wide Inside/outside Ø: 22/29 mm Suitable for: Commercial MAN and Mercedes-Benz vehicles: M 401/421, LA, A, M 403/423, M 470h Art. no SPECIAL TOOLS

27 ENGINE GROOVE LOCK NUT SOCKET CV 32 MM HEX DRIVE, WITH 4 STUDS, 8 MM For loosening and tightening the pressure screw on the nozzle holder. Length Properties Suitable for Art. no. PU 125 mm With hole to lead through the connecting cable for EDC MAN engines and Mercedes-Benz Euro II engines of the 400 series engines 70 mm With 22 mm counter nut for a secure and stable grip Commercial MAN and Mercedes-Benz vehicles: OM , 407, 409 h/ha, , /A/LA, 427, 429, 447/h/ha CV SOCKET ½" DRIVE, 19 MM HEX, 200 MM For tensioning of the V-belt on the alternator. Suitable for: MAN F90, F2000, Mercedes-Benz up to SK series Art. no TS SCREWDRIVER BIT SET (5-POINT STAR) 9-PIECE, ¼" DRIVE, WITH TAMPER-PROOF HOLE On socket rail in plastic case. Suitable for: For instance, for unit pumps of Mercedes-Benz Atego, Actros and Rover immobilizer Content: TS10/15/20/25/27/30/40/45/50 Art. no SPECIAL TOOLS 27

28 ENGINE CLUTCH CENTERING MANDREL SET 6-PIECE For the quick and precise centering of the clutch. For universal use on single- and dual-plate clutches. Content: 1x each Mandrel, adjustable from Ø mm and Ø mm; Pilot bearing adapters Ø 20, 25, 27 and 30 mm Supplied in a plastic case. Suitable for: Any type of commercial vehicle, buses, agricultural or construction machinery Art. no INJECTOR LINE WRENCH, HEX ⅜" DRIVE, 70 MM, IMPACT DESIGN 90 for injection lines. Size Suitable for Art. no. PU 10 mm Universal mm mm mm mm mm mm mm INJECTOR LINE WRENCH, BIHEX ½" DRIVE, 100 MM, IMPACT DESIGN 90 for injection lines. Size Suitable for Art. no. PU 14 mm Universal mm mm mm mm mm SPECIAL TOOLS

29 ENGINE CAMSHAFT ROTATOR For the manual, precise adjustment of the engine by the recess in the ring gear. MB and MAN ½" square drive with 2 gear wheels Suitable for: Mercedes-Benz OM h/ha, , /A/LA, 427, 429, 4289, 447/h/hA and all types of 12-cylinder MAN engines Art. no MB and MAN ½" square drive with 3 gear wheels and thick sandwich plate Suitable for: Mercedes-Benz 900 series, OM , e.g. Actros and Atego as well as all 5-, 6- and 8-cylinder MAN engines (no 12-cylinder engines), equivalent to MB , MAN Art. no Scania ½" square drive Suitable for: L series type 94/114/124/144 from and R series from 2004 Art. no DAF ½" square drive Suitable for: XF 105 Euro 5 Art. no Volvo ½" square drive Suitable for: 6- and 12-liter engines, D9A, D12, D16C Art. no DAF 24 mm hex drive Suitable for: F65, F75, F85, F95, CF 65, CF 75, CF 85, XF 95 Art. no SPECIAL TOOLS 29

30 ENGINE TRANSMISSION GEAR SWITCH IMPACT SOCKET ½" DRIVE, 27 MM OCTAGON, 75 MM For instance, for electrical switches of transmissions and other applications. Suitable for: Mercedes-Benz, MAN transmissions: 16S/112/130, 160/190, Art. no CV SOCKET ½" DRIVE, 27 MM OCTAGON, 60 MM For operating transmission and axle switches. Suitable for: MAN, Mercedes-Benz Actros, SK series Art. no GEARBOX FLANGE SOCKET CV ½" DRIVE, 36 MM BIHEX, 77 MM Suitable for: Mercedes-Benz passenger car rear axle bearing W140/ truck transmissions, MB transmission G2/24/26 coupling flange Art. no SPECIAL TOOLS

31 ENGINE TRANSMISSION ENGINE OIL DIPSTICK SET 4-PIECE To measure the oil level of engines and automatic transmissions. Suitable for: Mercedes Benz engine codes: M112, 113, 646, 647, 648, 103, 104, 943, 984, 985, 111, 119, 120, 137, 603, 913, 963, 97, 604, 605, 606, 611, and Mercedes Benz transmission codes: 716.5, 722.6, Absolutely necessary after an oil change, as vehicles are now supplied by manufacturers without any oil dipsticks and instead only feature a closing plug. Art. no SEAL PULLER WITH TWO HOOK SHAPES For the removal of sealing rings, O rings and shaft seals of any type. Length x width: 315 x 85 mm Suitable for: Any type of passenger car or commercial vehicle, buses, agricultural and construction machinery, mechanical and plant engineering Art. no SPECIAL TOOLS 31

32 ENGINE FUEL INJECTION SYSTEM/FUEL INJECTION PUMP SOCKET CV ½" DRIVE, 10 MM BIHEX, 110 MM For removal and mounting of the fuel injection pump. Suitable for: Mercedes-Benz Actros Art. no FUEL FILTER WRENCH ½" DRIVE, 95 MM 14PT For removal and mounting of the fuel filter in accordance with the torque values specified by the manufacturer. Suitable for: MAN-TGA, Mercedes-Benz Actros, agricultural machinery Art. no Ad-Blue FILTER SOCKET ⅜" DRIVE, 45 MM HEX, 65 MM For removal and mounting of the filter housing cap, for changing the filter element of Ad-Blue filters in commercial Mercedes-Benz vehicles with Blue Tec engine technology. Please observe the tightening torque of 23Nm recommended by the manufacturer. Suitable for: Mercedes-Benz new Actros, Atego, Axor, Econic Art. no SPECIAL TOOLS

33 ENGINE RADIATOR ENGINE COOLING SYSTEM TESTER SET FOR COMMERCIAL VEHICLES ALUMINUM VERSION, 9-PIECE For leakage tests of cooling systems. Scope of delivery: 1 Pressure pump with quick-release coupling, 1 flexible hose with quick-release coupling, 6 adapters Supplied in a plastic case Suitable for: Scania 113/114/124/125, DAF XF 95/XF 105, Mercedes-Benz Actros/Atego/Axor, Iveco Daily 2000-C series, MAN L 200-TGA, Volvo FH 12, MB Sprinter up to 2006 Art. no FILTER STRAP WRENCH FOR COMMERCIAL VEHICLES ½" For removal and mounting of air and water filter cartridges. Suitable for: Any type of commercial vehicle, construction and agricultural machinery Clamping range Art. no. PU Ø mm Ø mm SPECIAL TOOLS 33

34 ENGINE OIL SERVICE EXTRA STRONG OIL FILTER CHAIN WRENCH ½" DRIVE Suitable for: Universal Chain links Ø Art. no. PU mm mm mm OIL FILTER STRAP WRENCH ½" DRIVE Clamping range: mm Band width: mm Suitable for: Universal Art. no OIL FILTER WRENCH ½" DRIVE For removal and mounting. Size Suitable for Art. no. PU 94 mm, 14pt MAN 403, * mm, 15pt MAN 8 10t types: L2000, LE, M2000, ME, also suitable for, e.g., MANN filter W mm, 18pt MAN 18 48t types: TGA, F 2000, FE, , , also suitable for, e.g., MANN filter HU 1381x * Please observe maximum torque of 25Nm during installation 34 SPECIAL TOOLS

35 ENGINE OIL SERVICE/EXHAUST ENGINE OIL FILTER CAP SET 9-PIECE, 36 MM 108 MM Scope of delivery: 1x each oil filter strap wrench, single-end box wrench size 22 mm, cap wrench size 36/hex, size 76/14pt., size 106/15pt., size 107/15pt., size 108/15pt. and size 108/18pt., all oil filter wrenches with hex head drive size 22 SW22 mm and ½" socket square drive Suitable for: Universal Art. no OIL FILTER CAP WRENCH ⅜" DRIVE, 36 MM HEX For removal and mounting of the oil filter housing cap when changing the oil filter cartridge. Suitable for: Mercedes-Benz Actros MP1, MP2; 100D van engine 116 MB, E 250 D, M 605, M 606, E 300 D, E 220 D, C 220 D, C 250 D; MAN, e.g. TGA (fuel filter); BMW M5 2 6 cylinders, 3 series + 09/95, 5 series + 96, M6 0 8 cylinders, M cylinders, 8 series, 118 D, 120 D, 1 series (E87); VW Lupo 1.2 TDI, VW Touareg TDI, VW T5 2.5 D Art. no CHAIN PIPE CUTTER SPECIAL STEEL, NICKEL-PLATED For copper, brass and thin-walled steel pipes, plastic-coated pipes and exhaust silencers Stainless steel pipes with up to 2.5 mm wall thickness and Ø 60 mm Extra long chain allows for larger cutting diameter Suitable for: Universal Art. no Replacement chain: Art. no SPECIAL TOOLS 35

36 WHEELS/TIRES FOUR-WAY CV LUG WRENCH HEXAGON For loosening and tightening wheel nuts of commercial vehicles. Welded and hardened version, painted Heavy-duty version for professional use Suitable for: Commercial vehicles, buses, construction and agricultural machinery Drive Length Art. no. PU 19 x 22 x 24 x 27 mm 550 mm (¾ x ⅞ x ¹⁵ ₁₆ x ¹ ¹ ₁₆") 24 x 27 x 32 x 38 mm 750 mm x 27 x 30 x 32 mm + ¹³ ₁₆" 750 mm x 30 x 32 x 33 mm 750 mm x 30 x 32 x 33 mm (¹ ¹ ₁₆ x ¹ ³ ₁₆ x ¹ ¹ ₄ x ¹ ⁵ ₁₆" ) 750 mm * 1 * Robust, welded version, DIN 3119, fully hardened, chrome-plated, designed for heavy-duty applications. IMPACT SOCKET CV ¾" DRIVE, 33 MM HEX, 90 MM LENGTH For loosening and tightening wheel nuts of commercial vehicles. Suitable for: Any type of commercial vehicle, especially Scania Art. no SPECIAL TOOLS

37 WHEELS/TIRES WHEEL NUT SOCKET DEEP IMPACT HEXAGON SOCKET For loosening and tightening wheel nuts of commercial vehicles, buses, construction or agricultural machinery without extension. Suitable for: Any type of commercial vehicle or truck Size Drive Length Art. no. PU 27 mm ¾" 270 mm mm ¾" 270 mm mm ¾" 270 mm mm ¾" 400 mm mm ¾" 400 mm mm ¾" 400 mm mm ¾" 400 mm mm 1" 400 mm mm 1" 400 mm mm 1" 400 mm mm 1" 400 mm CENTERING PIN SET ½" 3-PIECE, 115 MM LENGTH For the removal and mounting of centered drop-center wheels of commercial vehicles. No damage to the thread and exact centering of the rim due to tapered pins. Bolt hole Lug bolt Suitable for Art. no. PU 21 mm M18 x 1.5 mm DAF, IVECO, MAN, RVI (Renault), Unimog, Volvo mm mm M20 x 1.5 mm Scania M22 x 2.50 mm M22 x 1.5 mm DAF, Ford, MAN, Mercedes-Benz, Renault, Scania, Volvo ⁷ ₈" 11G Scania, Volvo ⁷ ₈" 14G Volvo alloy rims SPECIAL TOOLS 37

38 BODY SPECIAL BODY SEAM SPLITTER SET, EXTRA SLIM FOR LEFT- AND RIGHT-HAND USE OFFSET For the separation of body parts and spot-welded panels, especially back doors, side doors, etc. Concave side edge Dimensions L x W x H: 290 x 25 x 7 Suitable for: Passenger cars, commercial vehicles, buses, agricultural machinery, mechanical and plant engineering Art. no TS Star screwdriver set (5-point) WITH TAMPERP-ROOF HOLE, 8-PIECE SET For TS five-point screws, 220 mm length, with ergonomic plastic handle For loosening and tightening security screws. Content: TS 10, 15, 20, 25, 27, 30, 40, 45 Suitable for: Injection pumps, rear lights of MB Atego, Actros, MAN, Rover immobilizer system, Smart interior and exterior panels, Audi, VW and Fiat air flow meters Art. no SPECIAL TOOLS

39 BODY MECHANIC TORQUE WRENCH ¾" AND 1" DRIVE Precision setting, according to DIN EN ISO 6789:2003 Easy and accurate settings due to turnable handle, robust steel version Reversible square drive for left- and right-hand operation Reaching the desired torque is indicated by an acoustic and palpable click, preventing additional tightening After use, relax spring and set to lowest torque value With calibration certificate, Quality "Made in Germany" 1 2 Fig. Drive Measuring range Scale div. Length Weight Head Ø Art. no. PU Nm lbf. in. Nm mm g mm 1 ¾" ,010 4, " 400 2, , ,050 13, Measuring range up to 2,100 Nm SPECIAL TOOLS 39

40 BODY WIPER ARM PULLER WITH SPECIAL HOOKS AND LOCKING FEATURE Max. opening/clearance: 0 60 mm/up to 50 mm Perfect wiper arm removal due to integrated locking feature. The locking bolt securely fastens the hooks to the wiper arm ensuring safe removal of the wiper arm. Suitable for: Passenger vehicles, vans, buses, construction and agricultural machinery Art. no IMPACT SOCKET ½" DRIVE, 25 MM BIHEX, 45 MM LENGTH For the attachment of metal bumpers Suitable for: Any type of commercial vehicle, especially MAN trucks Art. no PROFESSIONAL HAND RIVET TOOL For aluminum and steel rivets as well as threaded rivets. Foldable handles, supplied with plastic case, incl. accessories. Aluminum/steel: 3.2; 4.0; 4.8; 5.0; 6.4 mm/m4; M5; M6; M8; M10 Suitable for: Any type of passenger vehicle, commercial vehicle, metalworking applications, installations, construction, maintenance workshops, fittings Art. no SPECIAL TOOLS

41 BODY PRY BAR SET 4-PIECE Available in four different versions: Straight, 930 mm length Straight, 30 offset and extra-wide blade, 920 mm length Straight, 60 offset, 650 mm length Straight, 90 offset, 640 mm length Suitable for: Any type of passenger vehicle or commercial vehicle, metalworking applications, installations, construction, maintenance workshops Art. no TAPER PIN PUNCH, US ALLOY STEEL, EXTRA LONG HEXAGON SHAFT AND TAPERED TIP Suitable for: Any type of passenger vehicle, commercial vehicle, metalworking applications, installations, construction, maintenance workshops Ø Length Art. no. PU mm 280 mm mm 460 mm PARALLEL PIN PUNCH SET, 5-PIECE US ALLOY STEEL 3, 4, 5, 6, 8, EXTRA LONG TIPS, 110 MM Suitable for: Any type of passenger vehicle, commercial vehicle, metalworking applications, installations, construction, maintenance workshops Art. no SPECIAL TOOLS 41

42 UNIVERSAL IMPACT BIT SET CV 10-PIECE, ¾" DRIVE Suitable for: universal applications Contains: one bit each for 14mm, 17mm, 19mm, 22mm and 24mm hexagon socket screws; for Torx screws T70, T80, T90 and T100 plus ¾" bit holder Art. no IMPACT BIT SET 16-PIECE, ¾" AND 1" DRIVE Bits made from chrome molybdenum steel, black oxide finish. Contains: 13 bits with 22mm hexagon drive, Torx T60/T70/T80/ T90/100, 17/19/22/24 mm hex bits, external Torx E18/E20/E22/ E24, 2 bit holders with ¾" and 1" drive, 1 hex key to fasten the bits. Suitable for air impact drivers. Art. no Description Size Art. no. PU Impact bit 19mm hex key Impact bit 22 mm hex key Impact bit TX Impact bit TX Impact bit TX Impact bit E Impact bit holder ¾" drive Impact bit holder 1" drive SPECIAL TOOLS

43 UNIVERSAL STANDARD DRUM KEY 320 MM For all standard drum caps. Suitable for: Any type of passenger vehicle or commercial vehicle, metalworking applications, installations, construction, company workshops, fittings, woodworking applications Art. no FLEXIBLE RATCHET EXTENSION DRIVE WITH REINFORCED HINGES To access hard-to-reach locations and still apply high torques! Suitable for: Any type of passenger vehicle or commercial vehicle, metalworking applications, installations, construction, company workshops, fittings, woodworking applications ⅜" drive, 235 mm length, max. angle 180, 178 Nm Art. no ½" drive, 225 mm length, max. angle 90, 351 Nm Art. no Have a look yourself: SPECIAL TOOLS 43

44 UNIVERSAL SPECIAL SCREWDRIVER BIT SET CV 38-PIECE, ¼" + ½" DRIVE Contains: 1 piece each ¼" drive: TS drive (five-point) TS10/15/20/25/27/30/40/45/50 x 30 mm ½" drive: Ribe profile R7 x 240/R8 x 240/R9 x 100/R10 x 140 mm Torx drive T40/T45/T50/T55/T60/T70 x 140 mm XZN drive M9 x 100/M10 x 140/M12 x 140/M14 x 140 mm Hex drive 7mm x 230/10 mm x 140/11 mm x 140/13 mm x 140/14 mm x 55/17 mm x 55/19 mm x 55/22 mm x 55/24 mm x 55 mm Special ½" bits: Tamper-proof XZN bit M16 x 55 mm, XZN bit M16 x 100, impact XZN bit M18 x 78 mm, Torx bits T80 x 100/T30 x 300 mm both tamper-proof, hex bit 5 x 160 mm with ball head Art. no IMPACT SCREWDRIVER BIT SET 9-PIECE, ½" DRIVE With ball-retaining groove and hole Suitable for impact wrenches, 78 mm length Torx Contains: 1 piece each Torx drive T20/T25/T30/T40/T45/T50/T55/T60/T70 For Torx screws Art. no Hex Contains: 1 piece each 4/5/6/8/10/12/14/17/19 mm Art. no SPECIAL TOOLS

45 UNIVERSAL IMPACT SCREWDRIVER BIT SET CV 6-PIECE, ½" DRIVE XZN drive M14/M16/M18 Black oxide finish 43 and 75 mm lengths on socket rail Art. no IMPACT SCREWDRIVER BIT ¾" DRIVE, 76 MM For hexagon socket screws. Size Suitable for Art. no. PU 12 mm Mercedes-Benz: e.g. brake pads/ brake discs Audi/Seat/Skoda/VW: e.g. drive train components mm Universal mm Mercedes-Benz: e.g. brake pads/ mm brake discs Audi/Seat/Skoda/VW: e.g. drive train components IMPACT SCREWDRIVER BIT ¾" DRIVE, BLACK OXIDE FINISH, EXTRA LONG For highest demands Applications include: axles and brakes For use on hard-to-reach fasteners Size Suitable for Art. no. PU T 60 x 130 Various applications, especially T 70 x 130 Mercedes-Benz Actros brake discs, brake calipers, pitman arms For Torx drives SPECIAL TOOLS 45

46 UNIVERSAL IMPACT SCREWDRIVER BIT ½" DRIVE, SOLID, DESIGNED FOR SPECIAL APPLICATIONS, TORX Suitable for: Any type of commercial vehicle, especially Mercedes-Benz and MAN Size Length Art. no. PU T30 55 mm mm IMPACT SCREWDRIVER BIT ¾" DRIVE, TORX For fasteners on brake calipers/brake discs, differential housings/drive shafts and steering gears. Suitable for: Any type of commercial vehicle, especially Mercedes-Benz and MAN Size Length Art. no. PU T mm mm T70 80 mm T80 80 mm T90 80 mm T mm IMPACT SCREWDRIVER BIT CV ½" DRIVE, TORX Heavy-duty version with exchangeable bit For the highest quality requirements Suitable for: Any type of commercial vehicle or truck Size Length Art. no. PU T30 80 mm T40 80 mm T45 80 mm T50 80 mm T55 80 mm T60 80 mm SPECIAL TOOLS

47 UNIVERSAL IMPACT SOCKET ¾" DRIVE, BIHEX, HEAVY-DUTY VERSION Suitable for: Any type of commercial vehicle, especially Mercedes-Benz Atego Size Length Art. no. PU 17 mm 50 mm mm 50 mm mm 53 mm mm 100 mm mm 100 mm EXTERNAL THREAD REPAIR SET NES123 FOR EXTERNAL THREADS MM + ⁵ ₃₂" 6" Easy to adjust to any thread diameter and any thread pitch No additional calibration necessary Suitable for left- and right-hand threads For metric and American thread standards with 60 thread angles Delivered in blow-mold case Also available individually: NES1, 4-18 mm + 5/32" - 11/16" Art. no Suitable for: Various applications, passenger vehicles, commercial vehicles, metalworking applications, installations, construction, maintenance workshops Contains: 3 external thread repair tools: 1 NES mm + ⁵ ₃₂" ¹¹ ₁₆" 1 NES mm + ¹¹ ₁₆" 1 ½" 1 NES mm + 1 ¼" 6" 3 pairs of replacement blades and one manual deburring tool NES2, mm + 11/16" - 1 ½" Art. no Art. no NES3, mm + 1 ¼" - 6" Art. no SPECIAL TOOLS 47

48 UNIVERSAL CIRCLIP PLIERS, MAXI For internal and external circlips Robust design, made of US spring steel With ratchet mechanism and exchangeable, hardened, smoothed and polished tips for greater durability Contains: straight nose pliers Suitable for: Any type of passenger vehicle or commercial vehicle, metalworking applications, installations, construction, maintenance workshops Version Ø Tips mm Length mm Ø int./ext. circlip in mm Art. no. Internal int External ext Internal int External ext PU UNIVERSAL EXTENSION FORGED STEEL For the loosening of overtightened bolt connections in hard-to-reach places. Suitable for spanners, ring spanners, offset ring spanners, etc. also suitable as extension for hexagon keys such as inside hex, Torx, XZN or Ribe Integrated ½" square socket in the handle Suitable for: Any type of passenger vehicle or commercial vehicle, metalworking applications, installations, construction, maintenance workshops Total length: 340 mm for spanner sizes of up to 27 mm Art. no Total length: 580 mm for spanner sizes of up to 50 mm Art. no SPECIAL TOOLS

49 UNIVERSAL SQUARE SOCKET KEY 60 MM Made from malleable cast iron Nickel-plated with oval handle Suitable for: Mercedes-Benz and MAN buses 8 mm; length: 60 mm Art. no Suitable for: Truck storage cabinets 9 mm; length: 60 mm Art. no TRIANGLE SERVICES KEY 7 MM, ALUMINUM For the removal of the upper housing of fuel truck connectors Art. no RING SPANNER, ANGLED Angled version Standards: DIN 3113, Form B, ISO 3318, ISO 7738 Material: chrome-vanadium steel Surface: chrome-plated, head and ring polished Geometry: Ring spanner angled at 10 Size Length Art. no. PU 46 mm 520 mm mm 560 mm mm 610 mm mm 660 mm mm 710 mm mm 760 mm mm 810 mm mm 860 mm SPECIAL TOOLS 49

50 UNIVERSAL SINGLE-ENDED RING SPANNER, HEAVY-DUTY VERSION Angled version Material: chrome-vanadium steel Surface: chrome-plated Size Length Art. no. PU 70 mm 1,059 mm mm 1,069 mm mm 1,075 mm mm 1,076 mm mm 1,100 mm mm 1,100 mm mm 1,103 mm Accessories: Description Size Art. no. PU Extension tube Sizes mm Open-ended striking wrench Standards: DIN 133 Size Length Art. no. PU 75 mm 375 mm mm 405 mm mm 405 mm mm 445 mm mm 445 mm mm 485 mm STRIKING RING WRENCH Material: special steel Standards: DIN 7444 Size Length Art. no. PU 75 mm 330 mm mm 360 mm mm 360 mm mm 390 mm mm 390 mm mm 420 mm SPECIAL TOOLS

51 UNIVERSAL INSPECTION CAMERA, BASIC 7-PIECE, WITH 5.5 MM X 1 M SEMI-RIGID CAMERA CABLE Quick and simple visual inspection of damage in hard-to-reach places without any expensive or time-consuming disassembly being required (e.g. rocker panels, engines, gearboxes, axles, cavities, cable ducts and many other applications). 4 powerful mini LEDs with brightness control Portable, battery-powered system Direct connection through AV socket and connecting cable Camera head made of scratch-resistant sapphire glass to ensure maximum image quality and protect camera and lens Additional mirror extensions to increase the field of vision Digital zoom and mirror effect Art. no Contains Description Art. no. PU Video camera head, 5.5 mm, semi-rigid, Mirror attachment 70 x 5.5 mm Mirror attachment 90 x 5.5 mm Mirror attachment 110 x 5.5 mm Hook attachment 5.5 mm Magnet attachment 5.5 mm Hand-held device 1 AV cable V AA alkaline battery Technical data 2,4 TFT LCD QVGA color display Resolution: 320 x 240 pixels Weight 1,704 grams/set Video out format NTSC & PAL Angle of view: Horizontal angle 46 Vertical angle 34 Diagonal angle 56 Depth of field (DOF) At a distance of 1-6 cm Camera head IP67-certified water-resistant Suitable accessories: Description Art. no. PU Video camera head, 5.5 mm, flexible, Video camera head, 3.9 mm, semi-rigid, SPECIAL TOOLS 51

52 UNIVERSAL INSPECTION CAMERA PRO 10-PIECE, WITH 5.5 MM X 1 M SEMI-RIGID CAMERA CABLE For the inspection and documentation of hard-to-reach areas in the automotive, HVAC, construction, industry and aviation sector as well as for police and customs authorities with video recordings and/or photos as well as a live view through the TFT color screen and storage directly on the SD card. Recording function: Images in JPG and videos in NTSC or PAL format Powerful battery: 2 hours charging for 4 hours continuous use Optimum image quality due to 4 powerful mini LEDs with brightness control Portable, battery-powered system USB connection Direct connection through AV socket and connecting cable Camera head made of scratch-resistant sapphire glass to ensure maximum image quality and protect camera and lens Additional mirror extensions to increase the field of vision Digital zoom and mirror effect Art. no Contains Description Art. no. PU Video camera head, 5.5 mm, semi-rigid, Mirror attachment 70 x 5.5 mm Mirror attachment 90 x 5.5 mm Mirror attachment 110 x 5.5 mm Hand-held device - 1 AV cable - 1 Charger: output 5.5 V, 1.8 A (10 Watt max.) - 1 Input: V/50 60 Hz/0.5 A USB cable GB memory card - 1 Cleaning set - 1 Plastic case 535x300x85 mm - 1 Suitable accessories: Description Art. no. PU Hook attachment 5.5 mm Magnet attachment 5.5 mm Video camera head, 5.5 mm, flexible, Video camera head, 3.9 mm, semi-rigid, Technical data Battery Li-polymer 3.7 V (AC V/50 60 Hz) Display 3.5 TFT LCD QVGA Image format JPEG (640 x 480) Resolution H/V (325/250) Operating temperature 0 55 C Menu languages 26 Camera head 1 m x 5.5 mm semi-rigid, IP67 water-resistant Angle of view: Horizontal angle 46 Vertical angle 34 Diagonal angle 56 Mirror attachments 70, 90, 110 angle Depth of field (DOF) At a distance of 1-6 cm Weight 2250 grams/set 52 SPECIAL TOOLS

KÄSSBOHRER/SETRA. Wrenches for hub cover extraction. Wrenches for hubs. ideal for Bus. for models KÄSSBOHRER/ SETRA, MERCEDES and MAN

KÄSSBOHRER/SETRA. Wrenches for hub cover extraction. Wrenches for hubs. ideal for Bus. for models KÄSSBOHRER/ SETRA, MERCEDES and MAN Wrenches for hub cover extraction. Wrenches for hub cover and trailer nuts Axle nut disassembly Axle models KÄSSBOHRER/SETRA: front axle 6.5 and 7.5t in types S 210 and 215, SG 219-221 and dead axle types

More information

Front axle components, overview

Front axle components, overview just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,

More information

MAN - MERCEDES - BENZ

MAN - MERCEDES - BENZ SAYFA: 1 10100 10102 10103 355 353 06 15 355 353 03 15 346 353 08 15 AXLE GEAR AXLE GEAR AXLE (WITH BUSHING TYPE) (WITH BUSHING TYPE) (WITH BUSHING TYPE) 2521 2517-2521-2622 10104 10105 10106 308 350 00

More information

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46) 46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel

More information

Drive shaft, servicing

Drive shaft, servicing Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27A PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

Rail 001 112 2 Canvas, folding top 001 101 3 Rear panel 001 102 4 Stip in window, left 001 106 dto. right 001 107

Rail 001 112 2 Canvas, folding top 001 101 3 Rear panel 001 102 4 Stip in window, left 001 106 dto. right 001 107 U 411 1 Rear view mirror, round, metall 13cm Ø 002 045 2 Raised airintake 002 060 3 Side panelling, front, left 002 030 Side panelling, front, right 002 031 4 Panelling left 002 051 dto. right 002 052

More information

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices 04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust

More information

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431

More information

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003

More information

MERCEDES FIRST EDITION - 2013

MERCEDES FIRST EDITION - 2013 FIRST EDITION - 2013 CONTENTS Accessories... 1 Hydraulic Jacks Air Intake... 2 Air Filter Charger Charging System Intake Charger Hose Intake Manifold Intake Pipe Air Filter Intercooler Charger Aircondition...

More information

DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)

DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX

More information

Rear wheel brakes, servicing. Стр. 1 из 45. Note:

Rear wheel brakes, servicing. Стр. 1 из 45. Note: Volkswagen Touareg - Rear wheel brakes, servicing Стр. 1 из 45 46-2 Rear wheel brakes, servicing Rear brakes, FN 44 brake caliper, servicing Note: After replacing brake pads, depress brake pedal firmly

More information

for BPW axles and axle suspensions

for BPW axles and axle suspensions BPW Special tools and calibration equipment BPW BERGISCHE ACHSEN BPW Special tools and calibration equipment for BPW axles and axle suspensions BPW SPECIAL TOOLS AND CALIBRATION EQUIPMEN BPW Special tools

More information

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002

More information

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496

More information

BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)

BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)

More information

PET. Illustration 001-00. Pos Part Number Description Remark Qty Model. - 356 72 106 jack 1. - 356 72 108 operating rod 1. - 356 72 103 tool bag 1

PET. Illustration 001-00. Pos Part Number Description Remark Qty Model. - 356 72 106 jack 1. - 356 72 108 operating rod 1. - 356 72 103 tool bag 1 Model 959 0 0 00-00 7 6:56.0.00 tool and accessories tool - 7 06 jack - 7 0 operating rod - 7 03 tool bag - 7 0 spark plug wrench - 0 A ring wrench 36 MM - - tyre pressure gauge L 709 0-999 57 05 0 rim

More information

1993 SUSPENSION Volkswagen Front. EuroVan

1993 SUSPENSION Volkswagen Front. EuroVan Article Text ARTICLE BEGINNING 1993 SUSPENSION Volkswagen Front EuroVan DESCRIPTION FWD independent suspension is an double-wishbone type with torsion bars mounted on upper control arm. Wheel is supported

More information

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47) 47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing

More information

Front brakes (FN- 3), servicing

Front brakes (FN- 3), servicing j a t Front brakes (FN- 3), servicing 46-1 Front brakes, servicing Note: Install complete repair kit. After replacing brake pads and before moving vehicle, depress brake pedal several times firmly to properly

More information

STEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER

STEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER 14 14 STEERING HANDLEBAR/FRONT WHEEL/ SCHEMATIC DRAWING ------------------------------------------------- 14-1 SERVICE INFORMATION------------------------------------------------ 14-2 TROUBLESHOOTING-----------------------------------------------------

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

AXLE SHAFTS - FRONT. 1993 Toyota Celica DESCRIPTION REMOVAL, DISASSEMBLY, REASSEMBLY & INSTALLATION. 1993 DRIVE AXLES Toyota FWD Axle Shafts

AXLE SHAFTS - FRONT. 1993 Toyota Celica DESCRIPTION REMOVAL, DISASSEMBLY, REASSEMBLY & INSTALLATION. 1993 DRIVE AXLES Toyota FWD Axle Shafts AXLE SHAFTS - FRONT 1993 Toyota Celica 1993 DRIVE AXLES Toyota FWD Axle Shafts Toyota; Celica DESCRIPTION Axle shafts transfer power from transaxle to driving wheels. All axle shafts consist of a shaft

More information

Engine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator

Engine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator The Strobe light checks the unit for: Balance of operating machinery RPM of motors, engine pulleys, fans, etc. Observe belt slippage Strobe light will stop action at speeds from 200 to 6000 RPM 204-1890

More information

1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55

1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier

More information

O SL. BPW Original spare parts Air suspensions series O / SL / AL BPW BERGISCHE ACHSEN BPW ORIGINAL SPARE PARTS. BPW Original spare parts

O SL. BPW Original spare parts Air suspensions series O / SL / AL BPW BERGISCHE ACHSEN BPW ORIGINAL SPARE PARTS. BPW Original spare parts BPW riginal spare parts Air suspensions // BPW BERGISCHE ACHSEN BPW riginal spare parts Air suspensions series / / BPW RIGIN SPARE PARTS BPW riginal spare parts Air suspensions Contents Page Air suspension

More information

Ceta Form Tool Containers & Assortments

Ceta Form Tool Containers & Assortments Ceta Form Tool Containers & Assortments Smart service solutions A50IM-79 79 Piece Industrial Maintenance Kit 2 C-Plus Phillips screwdrivers, PH1x80; PH2x100 mm F14 15 Upgrade Kits upgrade the basic kit

More information

DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)

DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH) Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt

More information

ENGINE Dinli 904 D1033-011

ENGINE Dinli 904 D1033-011 ENGINE Dinli 904 D1033-011 ENGINE Model Item Part no Description Specification Quantity 01 E140000-01 E14 ENGINE 450C.C. 1 FENDER SEAT D1033-021 FENDER SEAT Model Item Part no Description Specification

More information

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

Machine devices, jig devices

Machine devices, jig devices Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056

More information

Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing

Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed Gearshift cable/lever installing Gearshift housing repairing Gearshift lever repairing lever/relay lever, installing Gearshift mechanism

More information

STEERING SYSTEM - POWER

STEERING SYSTEM - POWER STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and

More information

Slide the new steering column shaft through the steering column from the driver compartment.

Slide the new steering column shaft through the steering column from the driver compartment. Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.

More information

CAM-03, Camshaft Assembly Oil Seal Replacement

CAM-03, Camshaft Assembly Oil Seal Replacement CAM-03, Camshaft Assembly Oil Seal Replacement Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Flywheel Lock (P9206) Balance Shaft Pin Spanner

More information

BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00

BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00 Rocker Boxes 65-1137 Exhaust Lifter Cable 15.00 65-1163 Exhaust Lifter Cable Holder S/S 9.00 2-443 Exhaust Lifter Cable Holder Nut S/S 0.50 65-401 Exhaust Lifter Spindle Felt 2.00 65-387 Exhaust Lifter

More information

Rebuild Instructions for 70001 and 70010 Transmission

Rebuild Instructions for 70001 and 70010 Transmission Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

GTI VR6 Front Wheel Bearing DIY http://www.gtishrine.com

GTI VR6 Front Wheel Bearing DIY http://www.gtishrine.com GTI VR6 Front Wheel Bearing DIY http://www.gtishrine.com This procedure covers replacing the front wheel bearings. Tools and Parts required: Wheel Bearing Puller w/ ABS adapter. Available for rent from

More information

MKV Golf GTI Rear Brake Service - Replace Pads and Rotors

MKV Golf GTI Rear Brake Service - Replace Pads and Rotors Page 1 Installation Procedures MKV Golf GTI Rear Brake Service - This tutorial is provided as a courtesy by ECS Tuning. Proper service and repair procedures are vital to the safe, reliable operation of

More information

4-Speed Kick Start Kit

4-Speed Kick Start Kit 4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.

More information

AXLE SHAFTS - FRONT. 1998 Pontiac Bonneville MODEL IDENTIFICATION DESCRIPTION & OPERATION TROUBLE SHOOTING REMOVAL & INSTALLATION

AXLE SHAFTS - FRONT. 1998 Pontiac Bonneville MODEL IDENTIFICATION DESCRIPTION & OPERATION TROUBLE SHOOTING REMOVAL & INSTALLATION AXLE SHAFTS - FRONT 1998 Pontiac Bonneville 1998-99 DRIVE AXLES FWD Axle Shafts - Cars - "C", "G" & "H" Bodies GM Aurora, Bonneville, Eighty Eight, LeSabre, LSS, Park Avenue, Regency, Riviera MODEL IDENTIFICATION

More information

Operating Instructions Parts List Manual Scissor Lift Pallet Truck

Operating Instructions Parts List Manual Scissor Lift Pallet Truck Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors

More information

Volkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)

Volkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17) 17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning

More information

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical

More information

Installation instruction do88 Intercooler for Volvo S40 / V50 / C30

Installation instruction do88 Intercooler for Volvo S40 / V50 / C30 Installation instruction do88 Intercooler for Volvo S40 / V50 / C30 This instruction shows how to replace the OEM intercooler with our performance intercooler. 2. 3. 1. 4. 5. Part number: ICM-170 6. At

More information

Engine, disassembling and assembling

Engine, disassembling and assembling 13-1 Engine, disassembling and assembling Note: Replace the oil cooler and thoroughly clean the oil passages if you find metal shavings or larger quantities of small metal particles in the engine oil,

More information

HAZET Torque Wrenches

HAZET Torque Wrenches Ingenious Tools Torque Tools HAZET Torque Wrenches Torque Wrenches System 5000 CT The Classic Workshop Tool! Torque Ranges: 2,5 320 Nm Release accuracy tolerance (in direction of actuation) ± 4% of the

More information

PLM series Permanent load lifting magnets

PLM series Permanent load lifting magnets Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever

More information

TRANS-05, Torque Tube Removal, Rebuilding, and Installation

TRANS-05, Torque Tube Removal, Rebuilding, and Installation TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket

More information

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997 Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47

More information

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br

More information

Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT)

Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Price (excl VAT) Michelin Inner Tube, 3.00/3.25 x 17" 11.00 9.17 Michelin Inner Tube, 3.25/3.50/4.10 x 18" 13.00 10.83 Michelin Inner

More information

This is the civilian transfer case with the cooling loop only found in the driven gear half of the front case.

This is the civilian transfer case with the cooling loop only found in the driven gear half of the front case. INTRODUCTION The Transfer case used in the AMG Hummer is a New Venture Gear, model 242. This case has been in use for the H-1/Hummer since the early 1990 s. There have been modifications to the internal

More information

MONDOATHENS BASKETBALL SET (Reference PK110)

MONDOATHENS BASKETBALL SET (Reference PK110) MONDOATHENS BASKETBALL SET (Reference PK110) DESCRIPTION The MONDOATHENS backstop unit is mainly designed for multi-sports pavilions and installations where the highest-level basketball competitions are

More information

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware

More information

$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set:

$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set: D004006 47 Piece 6 Point Standard/Deep SAE/Metric Socket Set SAE Standard: 3/16"-9/16" SAE Deep: 3/16"-9/16" Metric Standard: 4-14 mm Metric Deep: 4-12 mm 2", 6" Extensions Hand Driver U-Joint 45 Tooth

More information

Mercedes Benz. Spare parts for trucks. Qualität made by dph Germany. Dichtungspartner Hamburg. Mercedes Benz Spare parts for trucks 2006 1

Mercedes Benz. Spare parts for trucks. Qualität made by dph Germany. Dichtungspartner Hamburg. Mercedes Benz Spare parts for trucks 2006 1 Mercedes Benz Spare parts for trucks Qualität made by dph Germany Dichtungspartner Hamburg Mercedes Benz Spare parts for trucks 2006 1 Important notes 1. This catalogue replaces all previous issues. 2.

More information

LIFT-505. BMF Lift Kit. Yamaha Drive Gas or Electric. Installation Instructions

LIFT-505. BMF Lift Kit. Yamaha Drive Gas or Electric. Installation Instructions LIFT-505 BMF Lift Kit Yamaha Drive Gas or Electric Installation Instructions Contents of LIFT-505 Yamaha Drive BMF Lift Kit: a (1 ea.) BMF A-Arm Assembly b (1 ea.) Driver Side Shock Tower c (1 ea.) Passenger

More information

AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District

AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District Repairs and overhauls automobiles, buses, trucks, and other automotive vehicles: Examines vehicle and discusses with customer or

More information

SCION tc 2005-2008 COIL OVER SUSPENSION Preparation

SCION tc 2005-2008 COIL OVER SUSPENSION Preparation SCION tc 2005-2008 COIL OVER SUSPENSION Preparation Part Number: PTR11-21070 NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: Item # Quantity Reqd. Description

More information

6,100 7,000 lb. Spring Axles

6,100 7,000 lb. Spring Axles Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Dump Trailers Construction Agricultural Equipment

More information

46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis

46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression

More information

ILLUSTRATED PARTS LIST

ILLUSTRATED PARTS LIST TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION

More information

2010 APPLICATION REFERENCE GUIDE

2010 APPLICATION REFERENCE GUIDE 2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE

More information

TUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1

TUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1 Part #: HT-1 1965-82 CORVETTE O-RING CONVERSION front CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette

More information

Makes bends greater than 90 in a single operation

Makes bends greater than 90 in a single operation TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles

More information

NOT SEARCHING, BUT FINDING

NOT SEARCHING, BUT FINDING NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide

More information

DANA 30 MANUAL HUB CONVERSION KIT

DANA 30 MANUAL HUB CONVERSION KIT DANA 30 MANUAL HUB CONVERSION KIT 12194 PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU BEGIN Your safety and the safety of other motorists is very important. Your Jeep is an off road capable vehicle

More information

Part No. AJS & MATCHLESS SINGLE ENGINE - NEW PARTS Price (20% VAT)

Part No. AJS & MATCHLESS SINGLE ENGINE - NEW PARTS Price (20% VAT) Part No. AJS & MATCHLESS SINGLE ENGINE - NEW PARTS Price (20% VAT) Price (excl VAT) 022298 Alloy cylinder barrel, 86mm bore, 1956-on short-stroke CS models. 240.00 200.00 000217 Nut for cylinder base stud,

More information

BULB REPLACEMENT BROCHURE

BULB REPLACEMENT BROCHURE BULB REPLACEMENT BROCHURE Contents Contents Explanation of Symbols 03 Audi A1 04 06 Audi A4 1.9 TDI with Xenon Headlights (from years of manufacture 2000 to 2005) 07 10 Audi A4 (8K5 / 8K2) with Bi-Xenon

More information

POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT

POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric

More information

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no. 5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model

More information

DYNA RIDER FOOTBOARD KIT

DYNA RIDER FOOTBOARD KIT -J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English

More information

DO NOT attempt to repair hub and wheel bearing assembly.

DO NOT attempt to repair hub and wheel bearing assembly. Page 1 of 6 HUB & WHEEL BEARINGS (WITH PULSE VACUUM HUBLOCK) DO NOT attempt to repair hub and wheel bearing assembly. Removal DO NOT remove hub lock assembly by prying on hub lock legs. This can crack

More information

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com. IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation

More information

INSTALLATION INSTRUCTIONS: Viewline 52 mm

INSTALLATION INSTRUCTIONS: Viewline 52 mm -5 Safety information The product was developed, manufactured and inspected according to the basic safety requirements of EC Guidelines and state-of-the-art technology. The instrument is designed for use

More information

Go-kart for little race-drivers

Go-kart for little race-drivers Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

CLASS III TRUCK PARTS Baker

CLASS III TRUCK PARTS Baker CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie

More information

TUTORIAL. REbUILdING. REAR CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-2

TUTORIAL. REbUILdING. REAR CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-2 Part #: HT-2 1965-82 CORVETTE O-RING CONVERSION REAR CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette

More information

C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP

C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS

More information

Industrial Torque Solutions

Industrial Torque Solutions Industrial Torque Solutions Who we are One Company, Total Support, Complete Solutions Over many years Hydratight has provided world class bolted joint solutions and continues to set international standards

More information

2016 Price Sheet. Custom Built Replacement Chassis

2016 Price Sheet. Custom Built Replacement Chassis 2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro

More information

Original Assembly Guide

Original Assembly Guide TCT Multipurpose Single Bevel Sliding Compound Mitre Saw Original Assembly Guide Read instructions before assembling this tool. Table of Contents GB Assembly Guide Read instructions before assembling this

More information

Parts#MB003-003 Reverse Gear MAMBA (Monoblock for Cable operated) For 5 speed Trans., '87 to '06 Big Twin models (except '06 Dyna)

Parts#MB003-003 Reverse Gear MAMBA (Monoblock for Cable operated) For 5 speed Trans., '87 to '06 Big Twin models (except '06 Dyna) Installation Instructions Reverse Gear MAMBA (Monoblock for Cable operated) Read and become familiar with these installation instructions before start. Two Piece for H-D 5 Speed Trans., Cable operated

More information

2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13)

2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13) 2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13) Exploded View Special Tools Required Ball joint remover, 28 mm 07MAC-SL0A202 Hub dis/assembly tool 07GAF-SD40100 Bearing driver attachment,

More information

13. REAR WHEEL/BRAKE/SUSPENSION

13. REAR WHEEL/BRAKE/SUSPENSION 13. REAR WHEEL/BRAKE/SUSPENSION 13 3.5~4.5kg-m 8.0~10.0kg-m 0.8~1.2kg-m 3.0~4.0kg-m 2.4~3.0kg-m 3.5~4.5kg-m 6.0~8.0kg-m 13-0 13. REAR WHEEL/BRAKE/SUSPENSION 13 REAR WHEEL/BRAKE/SUSPENSION SERVICE INFORMATION...

More information

Kobelco Extended Warranty Program. www.kobelco-europe.com

Kobelco Extended Warranty Program. www.kobelco-europe.com Kobelco Extended Warranty Program www.kobelco-europe.com Kobelco Extended Warranty is a convenient, value added way to give your Kobelco customers added security and peace of mind. Benefits of the Kobelco

More information

AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST

AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST All automotive students are required to provide their own hand tool set. The following list of tools will serve as a guide for Automotive Service Technology

More information

ARTICLE BEGINNING APPLICATION IDENTIFICATION DESCRIPTION LUBRICATION & ADJUSTMENT TROUBLE SHOOTING. MANUAL TRANSMISSIONS Saab 5-Speed Transaxle

ARTICLE BEGINNING APPLICATION IDENTIFICATION DESCRIPTION LUBRICATION & ADJUSTMENT TROUBLE SHOOTING. MANUAL TRANSMISSIONS Saab 5-Speed Transaxle Article Text ARTICLE BEGINNING MANUAL TRANSMISSIONS Saab 5-Speed Transaxle APPLICATION TRANSMISSION APPLICATION ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Vehicle Application Transmission

More information

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers

More information

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure 2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts

More information

Injectors. Mechanical kit. Injectors extractor kit - UNIVERSAL. Injectors extractor kit - SSANGYONG. Universal injector kit.

Injectors. Mechanical kit. Injectors extractor kit - UNIVERSAL. Injectors extractor kit - SSANGYONG. Universal injector kit. Injectors Mechanical kit Universal injector kit. This system provides to lock the bridge-bar to the engine heads. Mercedes Renault Fiat Peugeot Injectors: Bosch, Siemens, Delphi Mechanical working Mechanical

More information

Ford F-250 / 350 2-1/2 Coil Kit. Ford F-250, F350 2011-2015. Part#: 013255

Ford F-250 / 350 2-1/2 Coil Kit. Ford F-250, F350 2011-2015. Part#: 013255 Part#: 013255 Ford F-250 / 350 2-1/2 Coil Kit Ford F-250, F350 2011-2015 Rev.040815 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-279-2135 Web/live chat: www.bds-suspension.com. E-mail: tech@bds-suspension.com

More information

TABLE OF CONTENTS. I. TROUBLESHOOTING... 2 - Section 1.01: Common Problems/Solutions... 2

TABLE OF CONTENTS. I. TROUBLESHOOTING... 2 - Section 1.01: Common Problems/Solutions... 2 BAL Accu-Slide System I. Table of Contents TABLE OF CONTENTS I. TROUBLESHOOTING... 2 - Section 1.01: Common Problems/Solutions... 2 II. GETTING STARTED... 5 - Section 2.01: Tools You Will Need... 5 - Section

More information

Before installation it is important to know what parts you have and what the capabilities of these parts are.

Before installation it is important to know what parts you have and what the capabilities of these parts are. INSTALLATION GUIDE Before installation it is important to know what parts you have and what the capabilities of these parts are. The Recon XZT is the smallest and most powerful gauge of its kind. With

More information