COMPALARM C2C ALARM SYSTEM

Size: px
Start display at page:

Download "COMPALARM C2C ALARM SYSTEM"

Transcription

1 INSTRUCTION MANUAL IM670-U v0.1 COMPALARM C2C ALARM SYSTEM GENERAL Compact alarm system, with a basic module of 12 signals Multiple modules coupling possibility Easy printing of the alarm points description Opto-isolated inputs for 5 250V, NO or NC contacts, which can be set point by point Signal power free inputs 7 alarm sequence possibilities according with ISA S 18.1 Easy and fast programming by dipswitches First out feature for recognizing the first tripped alarm ModbusRTU protocol via RS485 serial port Interconnected systems for Alarm Management, distributed in various units High safety and reliability The COMPALARM C2C is a very compact and efficient alarm system, suitable for 12 points connection, with NO or NC input contacts and LED signals. This system is supplied in a 96 mm x 96 mm enclosure for flush mounting. An easy alarm s description printing, easy wiring by plug-in terminals and a good front protection degree, come to complete this attractive alternative. The COMPALARM C2C is being manufactured, in such a way to be capable to ensure an intrinsically safe reading of the inputs. The know how, used in the present instrument, has simplify the circuits up to a maximum, granting a high reliability and safety for avoiding false signals. It has also enabled to have a high immunity degree against external disturbance and signal management with increased voltage capability. The electronic management system allows to program the alarm behavior, according with the ISA S 18.1 standard, so as the inputs and outputs position. INPUTS The COMPALARM C2C has 12 inputs that can be set as NO or NC by dipswitches. All inputs are optoisolated and can be supplied with any voltage between 5 250V ac/dc. It has been also foreseen the inputs for acknowledgement, test and reset push buttons. OUTPUTS The outputs are fitted with two voltage free contacts relays. One of them is intended for the acoustic or alarm signaling and the other for a cumulative of alarms (normally excited or diexcited in case of alarm) for process activation approval, in presence of one active alarm (or non resetted yet) at least. The mentioned relay will also react due to a lack of power supply or due to its internal malfunction. INTERCONNECTION WITH OTHER MODULES With the wiring of one cable through other similar devices, it is possible to enlarge the system, which will work as an unique system, in order to grant a correct operation of the various alarm sequences, first out function included. In such a case, the outputs can be detected by any of the interconnected modules. PROGRAMMING AND OPERATION Each COMPALARM C2C module accepts up to 12 contacts, with a common pole, either open or closed in a rest position, which can be set for each input by dipswitches, placed behind the alarms description panel. The activation, memory and reset modes can be selected among the 8 most common sequences, according with the ISA 18.1 standard ISA A ISA M ISA R8 ISA M5 ISA F1A ISA F1M ISA F3 A. The mentioned sequences have following basic sequences: ISA A Automatic reset. ISA M Manual reset. ISA R8 Ringback. ISA M5 Signaling like ISA-M, but without flashing, when optical signaling. ISA F1A Automatic reset first out with no subsequent alarm state. ISA F1M Manual reset first out with no subsequent alarm state. ISA F3A Automatic reset first out with first out flashing and reset pushbutton Compalarm C2C instruction manual IM670-U v0.1 pag. 1 / 8

2 APPLICATION C2c is suitable for connection of 12 inputs from normally open or normally closed contacts. The operating alarm sequences can be easily configured according to ISA specifications. C2c is a compact device, all microprocessor based logic is embedded in the display unit. Alarm status are displayed by means of hi-brightness, maintenance free red led. A printed paper sheet can hold alarm associated text, placed under the front panel polyester foil and retained by an easily removable frame. High reliability, continuous self check, fail safe logic are important features for this device that is more than a simple annunciator and could be used like supervisor. Legend 1 6 IN1 12 IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9 PUSH BUTTONS TEST RESET COM B- A+ IN1 12 RELAYS OUTPUTS R2_NA R2_C R2_NC R1_NA R1_C R1_NC EXTN Alarm Inputs terminal (ac/dc) 2 - Ext. Switches Inputs terminal (ac/dc) 3 - Power supply terminal 4 - Extension Line Connection 5 - Output Relays 6 - RS485 Serial Communication IN10 IN11 IN12 ACK C.I. AUX SUPPLY 230V 115V 0V 3 C.I. C.I. 2 OPERATION At power-on or return from power-fail, the alarm system will reach an idle condition i.e. no visual and acoustic signalling. When an input associated contact changes state the alarm system turn from steady to alarm condition, this means that visual devices and horn output follows the pre-set sequence operation. The load output will be disabled until reset. By means of push buttons it s possible to acknowledge the alarm, silence the horn and reset to normal condition. A specific push button perform the visual device test, without perturbation to normal operation. Operating dip-switched are located under the polyester front foil, retained by removable click-in frame and must be selected before power-on. Before to place the polyester layer is possible to insert a simple paper sheet with alarm text to be visible through the transparent windows. This paper could be written, engraved or printed. Templates are available for easy PC printing. RESET TO FACTORY DEFAULT Press all the three push buttons on the first and, at the same time, switch ON the device. Compalarm C2C instruction manual IM670-U v0.1 pag. 2 / 8

3 FRONT PANEL Alarm 1 Alarm 2 Alarm 3 Alarm 4 compalarm C2C Alarm 7 Alarm 8 Alarm 9 Alarm 10 Legend 1 - Removable front frame 2 - LED lamp 3 - Transparent window for alarm description 4 - Power ON LED 5 - Push buttons Alarm 5 Alarm 11 Alarm 6 Alarm 12 4 Power ON ACK RESET TEST 5 1 Legend 1 - Normally open/close input 1 8 mode selection 2 - Normally open/close input 9 12 mode selection 3 - Internal buzzer off/on 4 - Operating sequence selector 5 - LED's light intensity adjust Compalarm C2C instruction manual IM670-U v0.1 pag. 3 / 8

4 ALARM SEQUENCES The following alarm sequences are available: Sequence A, Automatic Reset 1. Acknowledge, Test, and Mute pushbuttons. 2. Audible alarm can be silenced by pressing Mute pushbutton. 3. The audible device is silenced and flashing stops when acknowledged 4. Automatic reset of acknowledged alarm when process conditions return to normal. 5. Operational test. Sequence M, Manual Reset 1. Acknowledge, Reset, Test, and Mute pushbuttons. 2. Audible alarm can be silenced by pressing Mute pushbutton. 3. The audible device is silenced and flashing stops when acknowledged 4. Manual reset of acknowledged alarm when process conditions return to normal. 5. Operational test. Sequence M5, Manual Reset with No flashing The visual display flashing feature is deleted. New alarms have the same visual display indication as acknowledged alarms. Compalarm C2C instruction manual IM670-U v0.1 pag. 4 / 8

5 Sequence R, Ringback 1. Acknowledge, Reset, Test, and mute pushbuttons. 2. Alarm and ringback audible devices. 3. Audible alarm or ringback alarm can be silenced by pressing Mute pushbutton. 4. Ringback visual and audible alarm when process conditions return to normal. 5. Manual reset of ringback indications. 6. Operational test. Sequence R, Ringback 1. Acknowledge, Reset, Test, and mute pushbuttons. 2. Alarm and ringback audible devices. 3. Audible alarm or ringback alarm can be silenced by pressing Mute pushbutton. 4. Ringback visual and audible alarm when process conditions return to normal. 5. Manual reset of ringback indications. 6. Operational test. Compalarm C2C instruction manual IM670-U v0.1 pag. 5 / 8

6 Sequence F1A, Automatic Reset First Out with No Subsequent Alarm State 1. Acknowledge, Test, and Mute pushbuttons. 2. Alarm audible devices. 3. Audible alarm can be silenced by pressing Mute pushbutton. 4. Flashing and audible indications for first alarm only. New subsequent alarms go to the acknowledge state. 5. First out indication is reset and the audible is silenced when acknowledged. 6. Automatic reset of acknowledged alarm when process conditions return to normal. 7. Operational test. Sequence F1M, Manual Reset First Out with No Subsequent Alarm State 1. Acknowledge, Reset, Test, and Mute pushbuttons. 2. Alarm audible devices. 3. Audible alarm can be silenced by pressing Mute pushbutton. 4. Flashing and audible indications for first alarm only. New subsequent alarms go to the acknowledge state. 5. First out indication is reset and the audible is silenced when acknowledged. 6. Manual reset of acknowledged alarm when process conditions return to normal. 7. Operational test Compalarm C2C instruction manual IM670-U v0.1 pag. 6 / 8

7 Sequence F3A, Automatic Reset First Out with First Out Flashing and Reset Pushbutton 1. Acknowledge, First out Reset, Test, and Mute pushbuttons. 2. Alarm audible devices. 3. Audible alarm can be silenced by pressing Mute pushbutton. 4. First out flashing different from subsequent flashing. 5. Fist out Reset pushbutton to change the first out visual indication to be the same as subsequent visual indications. 6. Automatic reset of acknowledged alarm when process conditions return to normal. 7. Operational test. DIMENSIONS Compalarm C2C instruction manual IM670-U v0.1 pag. 7 / 8

8 TECHNICAL DATA MAIN POWER SUPPLY TYPE Supply voltage Power consumption Line fuse (external) LOW VOLTAGE SUPPLY TYPE Supply voltage Power consumption 115 or 230 V - 50/60Hz or Vac/dc 4.5 VA MAX 500 ma 20 60Vac/dc 4.5 VA MAX Line fuse (external) 1 A TERMINALS SCREW AND PLUG TERMINAL BLOCK Operating temperature 0 60 C Storage temperature C Relative humidity NON CONDENSING max 95 % Vibration allowed 0.5 G Overall dimensions (DIN43700) 72 x 144 x 65 mm Cut-out dimensions 92 x 92 mm Protection class (DIN VDE0470) IP40 Material Noryl UL V-0 SERIAL INTERFACE (OPTION) Standard RS485 Half-duplex (ModBus protocol) Connector 5.0mm pitch extractible screw terminals Isolation 4KVpeak o 2.5KVRMS transceiver stage self powered BaudRate Node-ID Parity Even Odd - None Stop bit 1 or 2 Emergency recovery configuration Node 1 Baud Rate no-parity 1 stop bit Mounting position Any Weight 500 g MAX Text window dimensions 34 x 9 mm Output channels 2 SPDT contacts Max switching voltage 250 Vac Max switching current 250V cosj=1 Max switching power 750 VA / 100 W Input channels 12 OPTOCOUPLED Input pushbuttons 4 OPTOCOUPLED Inputs Voltage 24 / 48 / 115 / 230 Vac/dc ± 20% Inputs current 5 ma MAX Extension line 1000 m MAX FOR COMMON SUPPLY SYSTEMS Power-on delay 5 s Galvanic separation Inputs Outputs Supply Test voltage Hz, 1 minute Isolation voltage 300 VRMS max EMC Compliance Directive EMC 89/336/EEC Emission EN Immunity EN ETHERNET MODULE (OPTION) Speed Connector 10/100 base T magnetics on-board RJ45 (standard RJ Ethernet connector) Contact the technical assistance or refer at specific document for application don t described in this manual. NOTE At reason of the evolution of standards and products, the company reserves to modify in every time the features of the product described in this document, that it s necessary to verify preventively. The liability of the producer for damage caused by defect of the product can be reduced or deleted ( ) when the damage is caused joint by a defect of product or for blame of the damaged or a person of which the damaged is responsible (Article 8, 85/374/CEE). Compalarm C2C instruction manual IM670-U v0.1 pag. 8 / 8

COMPALARM AP GENERAL MAIN FEATURES

COMPALARM AP GENERAL MAIN FEATURES GENERAL The COMPALARM AP is a point alarm system, with as many normally closed input contacts. It givesthe possibility of selecting the alarm sequence according with 0 x 0 mm cells, fitted with ultra bright

More information

AIS750 Series Alarm Annunciator

AIS750 Series Alarm Annunciator Unparallel, modular, multipoint design with Integrated controllers Two Operation Modes (Stand-alone & Serial) All sizes confi gurable up to 440 Alarm Points RS485 / RS232 Serial Communication Manual &

More information

TEMON 8-C. Doc. N MO-0370-ING TEMPERATURE MONITOR DEVICE TYPE TEMON 8-C OPERATION MANUAL. Microener - Copyright 2010 FW 2.2 Date 01.12.2008 Rev.

TEMON 8-C. Doc. N MO-0370-ING TEMPERATURE MONITOR DEVICE TYPE TEMON 8-C OPERATION MANUAL. Microener - Copyright 2010 FW 2.2 Date 01.12.2008 Rev. TEMPERATURE MONITOR DEVICE TYPE TEMON 8-C OPERATION MANUAL Microener - Copyright 2010 FW 2.2 Date 01.12.2008 Rev. 0 1. Generality 3 2. Introduction 3 3. Accessories and Options 3 4. Installation 3 5. Connection

More information

ZC-24DO CANopen I/O Module: 24 Digital Outputs

ZC-24DO CANopen I/O Module: 24 Digital Outputs Z-PC Line EN ZC-24DO CANopen I/O Module: 24 Digital Outputs Installation Manual Contents: - General Specifications - Technical Specifications - Installation Rules - Electrical connections - DIP-switches

More information

INSULATION MONITORING DEVICES

INSULATION MONITORING DEVICES 1 / 8 INDEX: Technical specifications VA40...2 Technical specifications TI1...3 Technical specifications CR5...4 Installation, configuration and use...5 2 / 8 1- INSULATION MONITORING RELAY VA40 1.1- Functions:

More information

Repeaters and Mimics Data Sheet

Repeaters and Mimics Data Sheet Repeaters and Mimics Data Sheet IDR series repeaters and mimics allow vital information from a Notifier fire system to be communicated to points around a building remote from the fire alarm control panel.

More information

Vroom Hardware manual ver. 1.00 Code 114VROOHWE00. Vroom CANBUS USER INTERFACE WITH LCD GRAPHIC DISPLAY AND WITH TEMPERATURE AND HUMIDITY SENSOR

Vroom Hardware manual ver. 1.00 Code 114VROOHWE00. Vroom CANBUS USER INTERFACE WITH LCD GRAPHIC DISPLAY AND WITH TEMPERATURE AND HUMIDITY SENSOR Vroom CANBUS USER INTERFACE WITH LCD GRAPHIC DISPLAY AND WITH TEMPERATURE AND HUMIDITY SENSOR ENGLISH HARDWARE MANUAL ver. 1.00 CODE 114VROOHWE00 page 1 of 22 Important Important Read these instructions

More information

Quick Connect. quick - simple - efficient. www.g-mw.de

Quick Connect. quick - simple - efficient. www.g-mw.de Quick Connect quick - simple - efficient www.g-mw.de Phone: +49 9103 7129-0 Fax: +49 9103 7129-207 Innovative connection technology to plug three single-phase current transformers to multifunctional power

More information

FIREDEX 2200. Conventional Fire Panels

FIREDEX 2200. Conventional Fire Panels 68 Flexible, high specification system Choice of 1, 2, 4 or 8 zones Simple one-shot auto-reset user test facility Approved to EN54 Maintenance free poly switch circuit protection, with auto reset Class

More information

Installation and user manual for the FX range of fire panels. 1, 2, 4 and 8 zone panels

Installation and user manual for the FX range of fire panels. 1, 2, 4 and 8 zone panels Installation and user manual for the FX range of fire panels 1, 2, 4 and 8 zone panels Contents Panel installation 3 Panel connections 3 Wiring connection drawings 4 Panel facilities 6 Installation check

More information

LAUREL. Laureate Quadrature Encoder Position & Rate Meter ELECTRONICS, INC. Features. Description

LAUREL. Laureate Quadrature Encoder Position & Rate Meter ELECTRONICS, INC. Features. Description LAUREL ELECTRONICS, INC. Laureate Quadrature Encoder Position & Rate Meter Features Accepts low-level differential or single-ended 5V logic level outputs from quadrature encoders Quadrature count x1, x2

More information

DLC - Ethernet MANUALE UTENTE USER'S MANUAL

DLC - Ethernet MANUALE UTENTE USER'S MANUAL DLC - Ethernet MANUALE UTENTE USER'S MANUAL 06/2004 INDEX 1. Introduction...1 2. Converter Description...2 2.1 Ethernet connector... 3 2.2 Power supply connector... 3 2.3 Serial Rs485 connector... 4 3.

More information

LAUREL ELECTRONICS, INC.

LAUREL ELECTRONICS, INC. LAUREL ELECTRONICS, INC. Laureate Quadrature Encoder Position & Rate Meter Features Accepts low-level differential or single-ended 5V logic level outputs from quadrature encoders Quadrature count x1, x2

More information

Rack mounted telephone- and leased line modem for industrial applications

Rack mounted telephone- and leased line modem for industrial applications Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as

More information

Telephone- and leased line modem for industrial applications TD-36

Telephone- and leased line modem for industrial applications TD-36 Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased

More information

Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2

Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2 Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male

More information

Short Form Catalogue. Alarm Systems. Reliable Supervision and Control

Short Form Catalogue. Alarm Systems. Reliable Supervision and Control Short Form Catalogue Alarm Systems Reliable Supervision and Control Alarm Monitors and Indicators The SELCO product range includes a number of alarm monitors and indicator panels for use in numerous applications.

More information

IQ151 CONTROLLER DATA SHEET

IQ151 CONTROLLER DATA SHEET IQ151 CONTROLLER DATA SHEET The IQ151 is a controller in the Trend range with 64 inputs and 32 outputs. Full DDC (direct digital control) with PID control loops is provided. The output channels may be

More information

ModBus Server - KNX. Gateway for integration of KNX equipment into Modbus (RTU and TCP) control systems.

ModBus Server - KNX. Gateway for integration of KNX equipment into Modbus (RTU and TCP) control systems. IntesisBox ModBus Server - KNX Gateway for integration of KNX equipment into Modbus (RTU and TCP) control systems. Integrate KNX based lighting control into your SCADA, BMS, PLC "talking" Modbus. Master

More information

TRS 06 TRANSPONDER READER- AND CONTROL UNIT. (Door Access Control System) Mounting Manual and Operating Manual

TRS 06 TRANSPONDER READER- AND CONTROL UNIT. (Door Access Control System) Mounting Manual and Operating Manual TRS 06 TRANSPONDER READER- AND CONTROL UNIT (Door Access Control System) Mounting Manual and Operating Manual Table of Contents 1. Function and Description of the Device 2 2. Installation Instructions

More information

IntesisBox KNX Modbus RTU master

IntesisBox KNX Modbus RTU master IntesisBox KNX RTU master Gateway for integration of RTU devices into KNX control systems. Integrate RTU devices (Chillers, Roof Tops, electricity meters, heating floors, heat pumps, PLCs ) into KNX control

More information

IntesisBox. BACnet/IP Server - LON. Integrate LonWorks devices or systems into BACnet control systems. IntesisBox RS232. Only needed for configuration

IntesisBox. BACnet/IP Server - LON. Integrate LonWorks devices or systems into BACnet control systems. IntesisBox RS232. Only needed for configuration IntesisBox Server - LON Gateway for integration of LON devices into BACnet control systems Integrate LonWorks devices or systems into BACnet control systems. BACnet IP client Ethernet LonWorks TP/FT-10

More information

IntesisBox KNX Modbus TCP master

IntesisBox KNX Modbus TCP master IntesisBox KNX TCP master Gateway for integration of TCP slave devices into KNX control systems. Integrate any TCP slave device into KNX. KNX TCP slave EIB Bus IntesisBox Ethernet slave LinkBoxEIB Configuration

More information

8 ALARM CHANNELS SET OF PIGEON-HOLES 2RISA96

8 ALARM CHANNELS SET OF PIGEON-HOLES 2RISA96 8 ALARM CHANNELS SET OF PIGE-HOLES 2RISA96 Control device and signalling alarms device in accordance to the functional standard ISA M (ex ISA 2C) that represent the most diffused device in industrial and

More information

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.

More information

100% electricity. Generating set controller RGK 60

100% electricity. Generating set controller RGK 60 00% electricity Generating set controller RGK 60 Large graphic screen for measurement and 5-language help prompt display Operating mode selection touch keys Manual control of stand-by generating set Load

More information

LONWORKS Fibre Optic Converter

LONWORKS Fibre Optic Converter LONWORKS Fiber Optic Converter LRW-102 and LRW-102/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-102 is a fibre optic modem designed for multidrop and redundant ring

More information

ENET-710. ENET-710 - Ethernet Module ENET-710 JAN / 06 FOUNDATION

ENET-710. ENET-710 - Ethernet Module ENET-710 JAN / 06 FOUNDATION ENET-710 ENET-710 - Ethernet Module JAN / 06 ENET-710 FOUNDATION E N E T 7 1 0 ME smar www.smar.com Specifications and information are subject to change without notice. Up-to-date address information is

More information

NC-12 Modbus Application

NC-12 Modbus Application NC-12 Modbus Application NC-12 1 Table of Contents 1 Table of Contents... 2 2 Glossary... 3 SCADA...3 3 NC-12 Modbus in general... 3 4 Entire system... 4 4.1 PFC to PC connection alternatives...4 4.1.1

More information

Digital Keypad with RFID Access Control User Manual

Digital Keypad with RFID Access Control User Manual Digital Keypad with RFID Access Control User Manual Contents: Name Quantity Remarks Digital Keypad 1 User manual 1 Screw driver 1 Rubber bungs 4 6*27mm, used for fixing Self tapping screws 4 3.5*27mm,

More information

JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410

JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410 The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a

More information

Comprehensive Modular Genset Controller

Comprehensive Modular Genset Controller Inteligen Click Here To Learn More Comprehensive Modular Genset Controller Brief Description The Inteligen is a comprehensive controller for single and multiple generating sets operating in standby or

More information

is then retained absolutely without interruption.

is then retained absolutely without interruption. Page 1 of 11 DC UPS uninterruptible power supplies - DC UPS module 15 A Compact design, only 50 mm wide Absolutely interruption-free buffering of power failures through immediate electronic connection

More information

IntesisBox KNX - LON

IntesisBox KNX - LON IntesisBox KNX - Gateway for integration of devices into KNX systems. Integrate Air Conditioning from the main manufacturers (DAIKIN, Mitsubishi Electric, Mitsubishi Heavy Industries, Toshiba, Fujitsu,

More information

Application/Connection Examples

Application/Connection Examples This Quick Start Guide is designed to familiarize the user with the connection and configuration of the DTS-305 DIN rail mounted single / 3 phase power & energy meter with RS-485 or TCP communications.

More information

ALARM ANNUNCIATOR ME - 3010 INSTRUCTION MANUAL

ALARM ANNUNCIATOR ME - 3010 INSTRUCTION MANUAL ALARM ANNUNCIATOR ME - 3010 INSTRUCTION MANUAL INTRODUCTION... 2.. TECHNICAL DATA... 3 ACCESSORIES... 5. INSTALLATION... 7 OPERATION... 12. TECHNICAL INFORMATION... 13 MAINTENANCE... 14. CONFIGURATIONS...

More information

AC-115 Compact Networked Single Door Controller. Installation and User Manual

AC-115 Compact Networked Single Door Controller. Installation and User Manual AC-115 Compact Networked Single Controller Installation and User Manual December 2007 Table of Contents Table of Contents 1. Introduction...5 1.1 Key Features... 6 1.2 Technical Specifications... 7 2.

More information

Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in

Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Single or Dual loop detector Automatically adjustment of detection level Manual sensitivity for compensations of variations Easy installation

More information

Introduction. Refrigerant Leak Detecting System. Feature and Benefits

Introduction. Refrigerant Leak Detecting System. Feature and Benefits PSC European Refrigeration Controls Catalogue Catalog Section 9 Product Bulletin PD-GAS-E Refrigerant Leak Detecting System Introduction This range of refrigerant leak detecting systems is designed for

More information

IntesisBox KNX Mitsubishi Heavy Industries AC

IntesisBox KNX Mitsubishi Heavy Industries AC IntesisBox KNX Mitsubishi Heavy Industries AC Gateway for integration of Mitsubishi Heavy Indsutries (MHI) Air Conditioners with KNX control systems. 1. Main Features Direct connection to KNX TP-1 (EIB)

More information

TELEDYNE HASTINGS INSTRUMENTS

TELEDYNE HASTINGS INSTRUMENTS TELEDYNE HASTINGS INSTRUMENTS THCD 100 Self contained display for flow meter/controller and pressure transducers FEATURES 16-Bit Resolution ± 0.2% Reading +1 Digit Accuracy 0-5 VDC Setpoint via Front Panel

More information

Operating Manual for the Electronic Built-in Interval Timer. Micro II (Countdown Timer)

Operating Manual for the Electronic Built-in Interval Timer. Micro II (Countdown Timer) Operating Manual for the Electronic Built-in Interval Timer Micro II (Countdown Timer) Note: This document has been designed for our OEM customers. They can use it as supporting material when creating

More information

M90-19-R5. RS232 to RS422/RS485 Isolated Universal Converter. 1. Introduction. 2. Function diagram

M90-19-R5. RS232 to RS422/RS485 Isolated Universal Converter. 1. Introduction. 2. Function diagram to RS422/RS485 Isolated Universal Converter 1. Introduction The converts serial data from the standard to either RS422 or RS485. Features: Universal converter can be used with both and other manufacturer

More information

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of

More information

KNX Panasonic Air Conditioners

KNX Panasonic Air Conditioners IntesisBox KNX Panasonic Air Conditioners Gateway for Panasonic ECOi and PACi system integration into KNX networks Up to 30 Outdoor units Up to 64 Indoor units PA-AC-KNX-64/128 EIA485 U1U2 line U1U2 line

More information

PolyGard Gas Controller System DGC-06

PolyGard Gas Controller System DGC-06 PolyGard Gas Controller System DGC-06 DESCRIPTION Measuring, warning and controlling device series for toxic, combustible and refrigerant gases and vapours. The gas controller series DGC-06 can monitor

More information

VIDI + Product description. System Controller for OPUS DC Power Systems. VIDI+ System Controller. Features

VIDI + Product description. System Controller for OPUS DC Power Systems. VIDI+ System Controller. Features 1 VIDI + System Controller for OPUS DC Power Systems Product description VIDI is the advanced monitoring and control device for OPUS DC Power Systems. It delivers intelligence, an easy user interface and

More information

EGX100 Ethernet gateway

EGX100 Ethernet gateway E90463 PB101556 The EGX100 serves as an Ethernet gateway for PowerLogic System devices and for any other communicating devices utilizing the Modbus protocol. The EGX100 gateway offers complete access to

More information

Product Datasheet NK8237 Modbus Gateway for Sinteso and Cerberus PRO fire detection systems

Product Datasheet NK8237 Modbus Gateway for Sinteso and Cerberus PRO fire detection systems Product Datasheet NK8237 Modbus Gateway for Sinteso and Cerberus PRO fire detection systems The NK8237 is used as a gateway between Sinteso (or Cerberus PRO) fire detection systems, and Modbus head-end/automation

More information

TX OPEN RS232/485 module

TX OPEN RS232/485 module s 8 185 8185P01 TX-I/O ; DESIGO OPEN TX OPEN RS/485 module for integrating third-party systems and devices to DESIGO (V4 or higher) TXI1.OPEN Platform to integrate third-party systems and devices to the

More information

PD 100A. Printing data system

PD 100A. Printing data system PD 100A Printing data system Operating instructions ENGLISH IMPORTANT: Read these instructions carefully before installing and using the device; do not forget following all additional information. Keep

More information

Automation System TROVIS 6400 TROVIS 6493 Compact Controller

Automation System TROVIS 6400 TROVIS 6493 Compact Controller Automation System TROVIS 6400 TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and process plants for general

More information

Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers

Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers Analog Data Links Multi-Channel Contact Closures Multiplexers Digital Data Links - Contact Closures Power Supply

More information

Digital input modules

Digital input modules 8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a

More information

Central Communication Unit

Central Communication Unit Central Communication Unit for LPB/BSB plants Series B OCI6 Central communication unit for the remote operation and supervision of LPB plants with a maximum of 6 LPB/BSB units Use Plant Buildings Operators

More information

M1000 Process Alarm Monitor

M1000 Process Alarm Monitor Data Sheet Process Alarm Monitor Reliable Supervision and Control 10 inputs with LED indications Supports both NO/NC input contacts 10 open collector outputs Built-in siren relay Text label for alarm descriptions

More information

Programmable Relays. ZEN Series. ZEN Programmable Relays. Applications

Programmable Relays. ZEN Series. ZEN Programmable Relays. Applications Programmable Relays ZEN Series Relay, Timer, Counter, and Time Switch Functions Weekly Timer and Calendar Timer Functions Twin Timer Function (Separate ON/OFF Times) Two Analog Input Channels (DC Models

More information

Features. Display. Measurements. Intelligent. Accuracy. Models. Installation DEIF A/S. Multi-instrument 4921210109D

Features. Display. Measurements. Intelligent. Accuracy. Models. Installation DEIF A/S. Multi-instrument 4921210109D 7000/7000C/7020 Multi-instrument 4921210109D Features Measurements All 3-phase AC measurements True RMS Replaces analogue meters Demand on each phase current Accuracy U, I and F class 0.5 Other values

More information

IntesisBox KNX LG Air Conditioning

IntesisBox KNX LG Air Conditioning IntesisBox KNX LG Air Conditioning Gateway for integration of LG Air Conditioners with KNX control systems. 1. Main Features Direct connection to KNX TP-1 (EIB) bus. Direct connection to LG outdoor unit

More information

TrueAlarm Fire Alarm Systems

TrueAlarm Fire Alarm Systems TrueAlarm Systems UL, ULC, CSFM Listed; FM Approved* Network Annunciators; es Features Provides a dedicated local area network (LAN) for connection of a TrueSite workstation server to remote clients: es

More information

MANUAL PC1000R INFO@APART-AUDIO.COM

MANUAL PC1000R INFO@APART-AUDIO.COM MANUAL PC1000R INFO@APART-AUDIO.COM Features The APart PC1000R is a professional multisource CD/USB/SD card music player, equipped with balanced and unbalanced analog outputs, coaxial and optical digital

More information

PowerLogic Sub Meter Display (SMD and SMDOPN)

PowerLogic Sub Meter Display (SMD and SMDOPN) Instruction Bulletin Z203742-0B PowerLogic Sub Display (SMD and SMDOPN) CONTENTS Introduction... 2 Parts of the Sub Display... 3 Dimensional Drawing... 4 Installation... 5 Mounting the SMD... 5 Mounting

More information

Temperature & Humidity SMS Alert Controller

Temperature & Humidity SMS Alert Controller Temperature & Humidity Alert Controller METERS 3 simple steps starting the unit: Insert the SIM card Plug in the sensors connectors Connect the AC power cord. Specifications: AC 90~260V Auto Select Internal

More information

The system. TLED luminaire RS-485 version. RS-485 Remote control through serial bus GEN. 2012

The system. TLED luminaire RS-485 version. RS-485 Remote control through serial bus GEN. 2012 The system For tunnel applications, the remote management of individual light points can be made using a direct and dedicated data communication via RS-485 serial line. It s possible to communicate with

More information

LPG and Natural gas leak detectors Series GSX - GSW

LPG and Natural gas leak detectors Series GSX - GSW LPG and Natural gas leak detectors Series GSX - GSW Main features - Suitable for domestic applications - Electronic operation based on microprocessor - Available in the following versions : wall mounting

More information

Power Switch-8. Master. Slave. User's Guide. Power Management

Power Switch-8. Master. Slave. User's Guide. Power Management Power Switch-8 Power Management Master Slave User's Guide V.02/2004 Power Switch-8 Power Switch-8 is a couple of power control units made of a Master named Power Switch Master and a slave named Power Switch

More information

EC ELECTRONIC CONTROL UNIT for gas or electric deep fryer TECHNICAL SPECIFICATION

EC ELECTRONIC CONTROL UNIT for gas or electric deep fryer TECHNICAL SPECIFICATION ELECTRONIC CONTROL UNIT for gas or electric deep fryer EC 8-256 TECHNICAL SPECIFICATION * Dimensions: 42 x 90 mm (user interface) and 105 x 90,5 mm (power module). * Power supply: 230 Vac (standard). *

More information

MST S3. Description. x86 computer module with Sercos III fieldbus master. Datasheet

MST S3. Description. x86 computer module with Sercos III fieldbus master. Datasheet MST S3 x86 computer module with Sercos III fieldbus master Datasheet Description Module MST S3 consists in a x86 architecture computer with a single loop Sercos III fieldbus master and SDVL (SMI Digital

More information

PXG3.W100. Web interface BACnet/IP. Desigo PX

PXG3.W100. Web interface BACnet/IP. Desigo PX s 9 294 Desigo PX Web interface BACnet/IP PXG3.W100 Local or remote operation of one or multiple PX automation station(s) via Desigo Touch Panels (TP) and standard web browser Connection via Ethernet Central

More information

IntesisBox Modbus Server Fidelio IP

IntesisBox Modbus Server Fidelio IP IntesisBox Server Fidelio IP Gateway for integration of Micros Fidelio Ho management system into (RTU and TCP) enabled control systems. Integrate your Micros Fidelio Ho management system into your master

More information

Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001

Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001 Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.

More information

s 8 186 TXB1.PROFINET PROFINET BIM TX-I/O

s 8 186 TXB1.PROFINET PROFINET BIM TX-I/O s 8 186 TX-I/O PROFINET BIM TXB1.PROFINET Interface between the automation station and the bus of the TX-I/O modules Compact format (to DIN43 880), small footprint Simple installation and easy access Self-establishing

More information

IntesisBox Modbus Server SAMSUNG Air Conditioners

IntesisBox Modbus Server SAMSUNG Air Conditioners IntesisBox Modbus Server SAMSUNG Air Conditioners Gateway for monitoring and control of Samsung NASA compatible Air Conditioning Systems from any Modbus master device TCP or RTU (BMS, PLC, SCADA, HMI,

More information

CPB. Doc. N MO-0279-ING MODBUS/PROFIBUS DP CONVERTER TYPE CPB. Microener - Copyright 2010 Date 20.12.2004 Rev. 0

CPB. Doc. N MO-0279-ING MODBUS/PROFIBUS DP CONVERTER TYPE CPB. Microener - Copyright 2010 Date 20.12.2004 Rev. 0 MODBUS/PROFIBUS DP CONVERTER TYPE CPB Microener - Copyright 2010 Date 20.12.2004 Rev. 0 INDEX 1. GENERAL 3 2. CPB SET 4 3. INSTALLATION 4 3.1 - CPB CONVERTER ASSEMBLING 4 3.2 - PROFIBUS TERMINAL DESCRIPTION.

More information

Entry-level, Ethernet-to-serial-line gateway

Entry-level, Ethernet-to-serial-line gateway PowerLogic EGX100 Entry-level, Ethernet-to-serial-line gateway Why an Ethernet-based network? Ethernet networks are commonly used for power monitoring for the following reasons: High performance and reliable

More information

LDE_0_ENG_RA0_03.qxd 23/10/ Pagina 1

LDE_0_ENG_RA0_03.qxd 23/10/ Pagina 1 LDE_0_ENG_RA0_03.qxd 23/10/2003 10.05 Pagina 1 - SMART TUNE- PID CONTROL - UNIVERSAL INPUT, 3 WIRE- TC, RTD - 3 RELAY/ SSR OUTPUTS - LOGIC INPUT OPTION - MULTI-FUNCTION RAMP- DWELL PROCESS TIMER - PROCESS,

More information

Smarthome SELECT Bluetooth Wireless Stereo Audio Receiver and Amplifier INTRODUCTION

Smarthome SELECT Bluetooth Wireless Stereo Audio Receiver and Amplifier INTRODUCTION Smarthome SELECT Bluetooth Wireless Stereo Audio Receiver and Amplifier INTRODUCTION The Smarthome SELECT Bluetooth Wireless Stereo Audio Receiver and Amplifier is a multi-functional compact device. It

More information

Substation Automation Products Relion 670/650 series IEC and ANSI Hardware

Substation Automation Products Relion 670/650 series IEC and ANSI Hardware Substation Automation Products Relion 670/650 series IEC and ANSI Hardware ABB Group 1MRG014097 October 2013 Relion 670/650 series hardware Contents Relion 670/650 series Relion Hardware Relion Common

More information

JUMO di 32 / di 08. Brief description. Block structure

JUMO di 32 / di 08. Brief description. Block structure M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 60030 Fax: +49 661 6003607 Email: mail@jumo.net Internet: www.jumo.net

More information

TX2123 RS485 TO ETHERNET ADAPTOR

TX2123 RS485 TO ETHERNET ADAPTOR TX2123 RS485 TO ETHERNET ADAPTOR Converts Datacomms between fibre optic Modbus TCP over Ethernet and hard-wired copper Modbus RTU over RS485 Fibre Optic MODBUS TCP/ IP Ethernet Copper MODBUS RTU RS485

More information

MAKING MODERN LIVING POSSIBLE. AK-SC255 On-Site Installation Guide DANFOSS ELECTRONIC CONTROLS & SENSORS

MAKING MODERN LIVING POSSIBLE. AK-SC255 On-Site Installation Guide DANFOSS ELECTRONIC CONTROLS & SENSORS MAKING MODERN LIVING POSSIBLE AK-SC255 On-Site Installation Guide DANFOSS ELECTRONIC CONTROLS & SENSORS How to Use This Guide Read this Guide completely as you install and start up your new AK-SC 255 controller.

More information

TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL

TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL w w w. c d v g r o u p. c o m CA-ETHR-A: TCP/IP Module Installation Manual Page Table of Contents Introduction...5 Hardware Components... 6 Technical Specifications...

More information

PC1000RMKII. Instruction manual

PC1000RMKII. Instruction manual PC1000RMKII Instruction manual PC1000RMKII Instruction manual 3 PC1000RMKII Manual 4 MEDIA PLAYER Features The Apart PC1000RMKII is a professional multisource CD/USB/SD card music player, equipped with

More information

Daker DK 1, 2, 3 kva. Manuel d installation Installation manual. Part. LE05334AC-07/13-01 GF

Daker DK 1, 2, 3 kva. Manuel d installation Installation manual. Part. LE05334AC-07/13-01 GF Daker DK 1, 2, 3 kva Manuel d installation Installation manual Part. LE05334AC-07/13-01 GF Daker DK 1, 2, 3 kva Index 1 Introduction 24 2 Conditions of use 24 3 LCD Panel 25 4 Installation 28 5 UPS communicator

More information

Electronic motor protection relay Type CET 4 - ordering information

Electronic motor protection relay Type CET 4 - ordering information Type CET 4 ordering information Description CET 4 Cat. No. CET 4 CWE 4 180 CWE 4630 CET 4 option cards CUD 4 CET 4 basic unit panel mounted 1 ) CET 4/ V AC CET 4 basic unit panel mounted 2 ) CET 4/ V DC

More information

02/11/2015

02/11/2015 Smart "Compact" range with display CD12 Smart Part number 88974043 Highly visible blue LCD with 4 lines of 18 characters and configurable backlighting Allow the use of the entire library of specific functions

More information

DATA LINK CONVERTER RS 232 / RS 485

DATA LINK CONVERTER RS 232 / RS 485 Via M.E. Lepido, 182-40132 BOLOGNA - P.O.BOX 4052 BorgoPanigale Tel.: +39 051 404140 - Fax: +39 051 402040 - WEB: www.ducatienergia.com DATA LINK CONVERTER RS 232 / RS 485 USER S MANUAL 0798 Table of contents

More information

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter Serial Interface One RS-232 port and one RS-422/485 port to 10/Base- TX Media Conversion Cost effective solutions of RS-232/ RS-422/ RS-485

More information

PCS0100en 02.2008. Persy Control Services B.V. Netherlands

PCS0100en 02.2008. Persy Control Services B.V. Netherlands P-Bus Gateway PBGW2.128 Universal gateway between the P-bus protocol and open standard protocols. The variety of available electrical interfaces on the gateway offers a wide range of possibilities for

More information

Shutter Actuator Standard, 4-fold, 230 VAC, MDRC RA/S 4.230.1, GH Q631 0076 R0111. ABB i-bus EIB

Shutter Actuator Standard, 4-fold, 230 VAC, MDRC RA/S 4.230.1, GH Q631 0076 R0111. ABB i-bus EIB , GH Q631 0076 R0111 2CDC 071 240 F0003 The Shutter Actuator Standard is used to control a maximum of four independent 230 VAC drives for positioning shutters, blinds, awnings and other hangings as well

More information

MANUAL Connection Unit

MANUAL Connection Unit MANUAL Connection Unit Conditions: Transactions, deliveries et cetera will be according to the general terms of delivery as deposited at the Chamber of Commerce at Meppel, The Netherlands. Registration

More information

TWDLCDA40DRF compact PLC base Twido - 24 V DC supply - 24 I 24 V DC - 16 O

TWDLCDA40DRF compact PLC base Twido - 24 V DC supply - 24 I 24 V DC - 16 O Characteristics compact PLC base Twido - 24 V DC supply - 24 I 24 V DC - 16 O Main Range of product Product or component type Discrete I/O number 40 Discrete input number 24 Discrete input voltage Discrete

More information

FL SWITCH SF... Factory Line Switches With Standard Functions. Data Sheet

FL SWITCH SF... Factory Line Switches With Standard Functions. Data Sheet Factory Line Switches With Standard Functions Data Sheet 05/2004 This data sheet is valid for the following products: FL SWITCH SF 8TX FL SWITCH SF 7TX/FX FL SWITCH SF 6TX/2FX FL SWITCH SF 16TX FL SWITCH

More information

www.sebury.com.cn Digital Keypad Use s Manual

www.sebury.com.cn Digital Keypad Use s Manual K3 K4 www.sebury.com.cn Digital Keypad Use s Manual Contents Introduction Introduction Specifications Intramural Interface Circuit 3 Mounting 3 Wiring 5 Power UP 7 Engineer Programming Mode 7 The K3/K4

More information

DALIK PROGRAMMING MANUAL. Gateway KNX-DALI. v1.4.3 TECHNICAL SUPPORT. Tel (+34)

DALIK PROGRAMMING MANUAL. Gateway KNX-DALI. v1.4.3 TECHNICAL SUPPORT. Tel (+34) Gateway KNX-DALI DALIK v1.4.3 PROGRAMMING MANUAL Parque Tecnológico de Asturias, Parcela 50, 33428 Llanera Asturias - Spain Tel (+34) 985 118 859 Fax (+34) 984 283 560 ingeniumsl@ingeniumsl.com www.ingeniumsl.com

More information

Remote Monitoring and REC 501 Control Unit Product Guide

Remote Monitoring and REC 501 Control Unit Product Guide Remote Monitoring and Control Unit REC 501 Product Guide Issued: May 1999 Status: Updated Version: B/06.11.2001 Data subject to change without notice Features Remote control and monitoring unit for the

More information

E-STOP relays, safety gate monitors

E-STOP relays, safety gate monitors Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 1 semiconductor output Connection

More information

Important: Read Before Commissioning

Important: Read Before Commissioning Safty Instructions Important: Read Before Commissioning The user must ensure that all operators are familiar with this operating manual and follow it at all times. The operating manual must be read carefully

More information

4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type code. TBPN-L1-FDIO1-2IOL Ident no. 6814053.

4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type code. TBPN-L1-FDIO1-2IOL Ident no. 6814053. PROFINET slave Integrated Ethernet switch 100 Mbps supported 2 x M12, 4-pin, D-coded, Ethernet fieldbus connection Glass-fiber reinforced housing Shock and vibration tested Potted module electronics Protection

More information

Thyristor-controlled power supplies and battery chargers

Thyristor-controlled power supplies and battery chargers Thyristor-controlled power supplies and battery chargers Input voltage: 115 / 230 VAC, single phase, 50 / 60 Hz or 208 / 400 / 480 VAC, three phases, 50 / 60 Hz Output voltage: 12 / 24 / 48 / 60 / 72 /

More information