NAVSEA REVIEWED ASTM F-718. LSA, Rapid Repair, High Solids Epoxy Non-Skid Deck Coating

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "NAVSEA REVIEWED ASTM F-718. LSA, Rapid Repair, High Solids Epoxy Non-Skid Deck Coating"

Transcription

1 ASTM F-718 International Paint, LLC Intershield-21 LSA, Rapid Repair, High Solids Epoxy Non-Skid Deck Coating MIL-PRF If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL. This NAVSEA-REVIEWED ASTM F-718 data sheet is the only data sheet approved for use when utilizing this coating for U.S. Navy preservation projects. NAVSEA s review covers only the application process for the material. The review does not denote the material as a qualified product, nor does it constitute an approval for purchase/procurement of the material. For products on the Qualified Products List (QPL) for this MILSPEC, please refer to Questions regarding modifications or updates of this ASTM F-718 shall be directed toward: NST Center (502)

2 ASTM F 718 SHIPBUILDERS AND MARINE PAINTS AND COATINGS PRODUCT/PROCEDURE DATA SHEET CONTINUATION SHEET USED: YES NO I. GENERIC TYPE AND DESCRIPTION: Intershield 21 LSA, Rapid Repair, High Solids Epoxy Non-Skid Deck Coating Specification Number, Type, Class and/or Grade (If Applicable): MIL-PRF-24667, Type VII, Composition G & L II. MANUFACTURERS DATA: (a) MANUFACTURER: International Paint LLC (b) PRODUCT DESIGNATION: Part A: EGA210 Part B: EGA211 National Stock Number (NSN): (c) COLOR(S): FSC Dark Gray (d) USES: Non-skid deck coating for repair in General and Landing areas. (e) TECHNICAL SERVICE REPRESENTATIVE (Include Telephone Nos.): (800) Technical Information Fax: (713) (f) NOT RECOMMENDED FOR: Immersion III. PROPERTIES: (a) % VOLUME SOLIDS (ASTM D 2697): 94 ± 2% (b) % WEIGHT SOLIDS (ASTM D1475): 97 ± 2% (c): FLASH POINT (ASTM TEST METHOD D 93 OR D 56 OR D 3278): 102 F (Mixed) (d): WEIGHT PER VOLUME: (FTMS 141a4184.1): 15.4 ± 0.5 lbs (e) % EDGE RETENTION (IF REQUIRED BY APPLICABLE SPECIFICATION): N/A (f): SHELF LIFE: 12 months (g) VISCOSITY (STATE TEST METHOD TO BE USED): COMPONENT A: N/A (h) PACKAGING: 5 gallons in a 6 gallon kitted pack (i): NUMBER OF COMPONENTS: 2 (j) GLOSS (ASTM D 523): N/A COMPONENT B: N/A MIXED: N/A (k) STORAGE REQUIREMENTS: TEMP. MIN. 65 F MAX. 85 F ADDITIONAL PAINT STORAGE REQUIREMENTS: For 24 hours prior to use MIN 65 F (l) VOLATILE ORGANIC COMPOUND (EPA TEST METHOD 24): 90 g/l (m) WEIGHT OF DRY FILM (WEIGHT/FT 2 AT 1 MIL THICKNESS): N/A MAX 85 F (n): SPECIAL PROPERTIES (e.g., STAIN RESISTANCE, LOW SOLAR ABSORBANCE, MOISTURE TOLERANCE): Low solar absorbance, fast cure. IV. SURFACE PREPARATION MINIMUM REQUIREMENTS (USE SPECIFIC STANDARD NUMBERS): (a) INITIAL Remove all surface contamination by solvent cleaning to SSPC-SP 1. (b) TOUCH-UP Clean to SSPC-SP 11 minimum (c) PROFILE (INCLUDE METHOD USED) Profilometer gauge or Testex Replica Tape - MIN. 2.0 mils MAX. 4.5 mils (d) SPECIAL INSTRUCTIONS Surface to be painted must be dry and clean. Date: 10/2010 Rev. C2 (e) PRIMER REQUIREMENTS (IF APPLICABLE): Intershield 456 (optional). Consult the ASTM F718 for Intershield 456 for specific information. (f) MAXIMUM ALLOWABLE CONDUCTIVITY (BRESLE PATCH METHOD): Not Required. (g) MAXIMUM DEGREE OF FLASH RUSTING ALLOWABLE (LIST COMMERCIAL STANDARD): None

3 SPECIAL SAFETY PRECAUTIONS: REFER TO MATERIAL SAFETY DATA SHEET V. MIXING PROCEDURES: (a) MIXING RATIOS BY WEIGHT 9.96:1 (A:B) BY VOLUME 5:1 (A:B) (b) INDUCTION TIME N/A (c) RECOMMENDED SOLVENT THINNING NO THINNING ALLLOWED CONFINED AREAS - NO THINNING ALLOWED NON-CONFINED AREAS - NO THINNING ALLOWED CLEAN UP GTA415 (d) THINNING REQUIREMENTS (RATIO) NO THINNING ALLOWED (e) POT LIFE ºF 30 73ºF 15 95ºF (f) SPECIAL INSTRUCTIONS Use intrinsically safe equipment. Use a high-torque drill suitable for mixing heavy materials in 5-gallon pails. A Jiffy blade or vortex paddle suitable for 5- gallon containers should be used to achieve a uniform well-mixed material. Pre-mix Part A for 2 minutes. Pour Part B into Part A and mix the material for 4-5 minutes, making sure to scrape the sides of the pail. While mixing, the mixing blade should be moved up, down, and around the can to thoroughly mix the material to achieve a uniform and well-mixed non-skid. IMMEDIATELY AFTER MIXING, POUR THE ENTIRE CONTENTS ON THE SURFACE AND SPREAD QUICKLY. VI. APPLICATION: (a) ENVIRONMENTAL LIMITATIONS - SUBSTRATE TEMPERATURE: MIN. 40 F MAX. 110 F MINIMUM SUBSTRATE TEMPERATURE DIFFERENCE ABOVE THE DEW POINT - 5 F RELATIVE HUMIDITY: Refer to NAVSEA Standard Item AMBIENT TEMPERATURE: MIN. 55 F MAX. 100 F (b) FILM THICKNESS (SSPC-PA 2): PER COAT: WET MIN. WET MAX. Rolled sq ft/gallon DRY MIN. TOTAL SYSTEM: DRY MIN. DRY MAX. DRY MAX. (c) DRY TIMES (ASTM D 1640) See graphs on following page. (d) EQUIPMENT REQUIREMENTS (INCLUDE PREFERRED, SUITABLE, NOT SUITABLE REQUIREMENTS) Apply with a smooth, phenolic core roller cover. IF PLURAL COMPONENT EQUIPMENT IS REQUIRED, STATE SO N/A IF HEATED LINES ARE REQUIRED, STATE SO N/A (e) SPECIAL INSTRUCTIONS Do not apply when deck temperature is below 40 F or above 110 F. At time of application, temperature of the material must be between 60 F and 90 F. PROVIDE INFORMATION FOR REPAIR PROCEDURES IF THE OVERCOAT WINDOW HAS BEEN EXCEEDED: Refer to NSTM Chapter 634 for non-skid guidelines.

4

5 ASTM F 718 CONTINUATION SHEET FOR SHIPBUILDERS AND MARINE PAINTS AND COATINGS PRODUCT/PROCEDURE DATA SHEET 10/2010 Rev. C2 I. GENERIC TYPE AND DESCRIPTION: Intershield 21 LSA, Rapid Repair, High Solids Epoxy Non-Skid Deck Coating Specification Number (If Applicable): MIL-PRF-24667B, Type VII, Composition L ADDITIONAL DATA/ INSTRUCTIONS: II. MANUFACTURERS DATA: ADD ADDITIONAL COMMENTS FROM PART II HERE Interthane 990 or 990HS can be used for deck markings. III. PROPERTIES: ADD ADDITIONAL COMMENTS FROM PART III HERE IV. SURFACE PREPARATION MINIMUM REQUIREMENTS (USE SPECIFIC STANDARD NUMBERS): ADD ADDITIONAL COMMENTS FROM PART IV HERE Cleaning via UHP-WJ does not create an anchor tooth profile. V. MIXING PROCEDURES ADD ADDITIONAL COMMENTS FROM PART V HERE VI. APPLICATION REQUIREMENTS ADD ADDITIONAL COMMENTS FROM PART VI HERE Thick, carelessly applied coats will result in minimum coverage and may be subject to mudcracking, un-uniform appearance, and blistering. Dry times are normally a function of humidity, ventilation, and temperature. Information given is to be used as a guideline only. WARRANTY DISCLAIMER: The technical data given herein has been compiled for your assistance and guidance and is based upon our experience and knowledge. However, as we have no control over the use to which this information is put, no warranty, expressed or implied, is intended or given.

10P20-44 High Solids Epoxy Primer

10P20-44 High Solids Epoxy Primer Technical Data Sheet Product Group High solids epoxy primer Characteristics Product Information A high solids urethane compatible, Skydrol resistant primer for the exterior of aircraft. It provides excellent

More information

SIGMASHIELD 460. PRODUCT DATA SHEET December 15, 2014 (Revision of June 1, 2013) DESCRIPTION

SIGMASHIELD 460. PRODUCT DATA SHEET December 15, 2014 (Revision of June 1, 2013) DESCRIPTION DESCRIPTION Two-component, high solids glass flake reinforced polyamine adduct epoxy coating PRINCIPAL CHARACTERISTICS Excellent abrasion and impact resistance Suitable for use on ice-going vessels Excellent

More information

SIGMACOVER 300. PRODUCT DATA SHEET December 12, 2014 (Revision of November 1, 2013) DESCRIPTION

SIGMACOVER 300. PRODUCT DATA SHEET December 12, 2014 (Revision of November 1, 2013) DESCRIPTION DESCRIPTION Two-component, high-build, polyamine adduct-cured, coal tar epoxy coating PRINCIPAL CHARACTERISTICS Outstanding (sea)water resistance (outside hull and ballast tanks) Outstanding water- and

More information

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 100 C VOC-US/Hong Kong. US EPA method 24 (tested)

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 100 C VOC-US/Hong Kong. US EPA method 24 (tested) Approved 500;501;499 1,5 500 epoxy ^(ValidationDate). 1 Product description This is a two component amine cured solvent free epoxy coating. It is transparent. It ensures very good adhesion on most concrete

More information

SIGMACOVER 456. PRODUCT DATA SHEET December 12, 2014 (Revision of November 1, 2013) DESCRIPTION

SIGMACOVER 456. PRODUCT DATA SHEET December 12, 2014 (Revision of November 1, 2013) DESCRIPTION DESCRIPTION Two-component, high-build, polyamide-cured recoatable epoxy coating PRINCIPAL CHARACTERISTICS General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete

More information

PPG HI-TEMP 1027 PRODUCT DATA SHEET. June 30, 2014 Revision of January 28, 2014 DESCRIPTION

PPG HI-TEMP 1027 PRODUCT DATA SHEET. June 30, 2014 Revision of January 28, 2014 DESCRIPTION DESCRIPTION One component, high-build heat-resistant inert multipolymeric matrix coating to prevent corrosion under insulation (CUI) of carbon and stainless steel to temperatures ranging up to 650 C (1200

More information

Epoxy/Urethane Concrete Coating System

Epoxy/Urethane Concrete Coating System Epoxy/Urethane Concrete Coating System Application Guide Endura offers a coating system for concrete floors consisting of an epoxy primer and a urethane topcoat. It can be used on garage, warehouse and

More information

SIGMAFAST 210. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2013) DESCRIPTION

SIGMAFAST 210. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2013) DESCRIPTION DESCRIPTION Two-component, high-build zinc phosphate polyurethane primer/finish PRINCIPAL CHARACTERISTICS Specially designed for in-shop application Fast-curing Easy application by airless spray Unlimited

More information

Eclipse. Technical Data Sheet. Polyurethane topcoat. Product Group

Eclipse. Technical Data Sheet. Polyurethane topcoat. Product Group Technical Data Sheet Product Group Polyurethane topcoat Characteristics Product Information A chemically cured, low VOC topcoat designed to provide premium gloss and distinctness of image (DOI). This coating

More information

SC2000 CEMENT BONDING PROCEDURES

SC2000 CEMENT BONDING PROCEDURES Pg.1 SC2000 CEMENT BONDING PROCEDURES Widely recognized as the world s finest cold vulcanizing cement REMA SC2000 is the solution to your industrial bonding problems. By using REMA UTR20 hardener with

More information

Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 27 C calculated IED (2010/75/EU) (calculated)

Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 27 C calculated IED (2010/75/EU) (calculated) Approved 402;2521 1 2521 zinc epoxy ^(ValidationDate). 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms

More information

Interspec. Technical Specification C.C.G.S. CCGS Hudson. Halifax (NS), Canada. 01-Jun-2015. Marine Coatings

Interspec. Technical Specification C.C.G.S. CCGS Hudson. Halifax (NS), Canada. 01-Jun-2015. Marine Coatings Where legislation does not explicitly restrict or limit the use of lead containing coatings it is the responsibility of the client to inform International Paint in writing of their specific requirements

More information

High Solids Epoxy Coating

High Solids Epoxy Coating DESCRIPTION High Solids Epoxy Coating March 2012 Revision of November 2011 PRINCIPAL CHARACTERISTICS Low VOC High performance general maintenance coating for new or old steel Self priming over most existing

More information

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 30 C calculated VOC-US/Hong Kong. US EPA method 24 (tested)

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 30 C calculated VOC-US/Hong Kong. US EPA method 24 (tested) Approved 3140;3240;4320 1,2 3140 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very

More information

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1. 212 F (100 C) calculated VOC-US/Hong Kong. US EPA method 24 (tested)

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1. 212 F (100 C) calculated VOC-US/Hong Kong. US EPA method 24 (tested) Not approved 2063;2064 1,2 2063 ^(ValidationDate) 1 Product description This is a two component solvent free polyamine cured coating. It is a general purpose tank lining with good chemical resistance.

More information

SIGMACOVER 280. PRODUCT DATA SHEET December 10, 2014 (Revision of March 1, 2014) DESCRIPTION

SIGMACOVER 280. PRODUCT DATA SHEET December 10, 2014 (Revision of March 1, 2014) DESCRIPTION DESCRIPTION Universal epoxy anticorrosive primer, based upon pure epoxy technology PRINCIPAL CHARACTERISTICS Universal epoxy primer system suitable for Ballast Tanks, Decks, Topside, Superstructure, Hull

More information

ONBOARD MAINTENANCE PAINT GUIDE

ONBOARD MAINTENANCE PAINT GUIDE ONBOARD MAINTENANCE PAINT GUIDE CONTENT Page A practical Onboard Maintenance Paint Guide 1.0 2.0 3.0 INSPECTION AND PLANNING 4 HSE 6 SURFACE PREPARATION 8 The purpose of this guide is to provide easy and

More information

SC4000 CEMENT BONDING PROCEDURES

SC4000 CEMENT BONDING PROCEDURES Pg.1 SC4000 CEMENT BONDING PROCEDURES The REMA TIP TOP SC4000 Bonding System is free of chlorinated hydrocarbons (CFC), and consists of the following products: REMA TIP TOP Cement SC4000 + E40 Hardener

More information

Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong. US EPA method 24 (tested)

Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong. US EPA method 24 (tested) Approved 735;739 1 735 phenolic/novolac epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured phenolic/novolac epoxy coating. It is a specially designed tank lining with

More information

Note: Minor color change may occur in exposed service, but corrosion protection will not be compromised

Note: Minor color change may occur in exposed service, but corrosion protection will not be compromised DESCRIPTION One component, high-build heat-resistant inert multipolymeric matrix coating to prevent corrosion under insulation (CUI) of carbon and stainless steel to temperatures ranging up to 650 C (1200

More information

PHOENIX 370-120 Product Data Sheet (Updated on 14-Jan-2012) www.phoenixasia.com.hk

PHOENIX 370-120 Product Data Sheet (Updated on 14-Jan-2012) www.phoenixasia.com.hk DESCRIPTION A water borne thin film intumescent coating for the fire protection of structural steelwork. PRODUCT FEATURES AND RECOMMENDED USES Provides up to 120 minutes fire resistance to structural steelwork.

More information

Property Test/Standard Description Solids by volume. ISO 3233 Flash point ISO 3679 Method 1 130 C

Property Test/Standard Description Solids by volume. ISO 3233 Flash point ISO 3679 Method 1 130 C Other Technical Data Sheet 8744;8745 6 8744 VValidationDate). 1 Product description This is a two component fairing compound/filler. It is an ultra lightweight, solvent free product. It has excellent sanding

More information

Approved. Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong

Approved. Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong Approved 8380;8500 2 8380 phenolic/novolac epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured phenolic/novolac epoxy coating. Specially designed tank coating with excellent

More information

Scotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, 2016. Product Description

Scotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, 2016. Product Description 3 Scotch-Weld TM 1838 1838 1838-L Technical Data February, 2016 Description 3M TM Scotch-Weld TM s 1838 and are controlled flow products; Scotch-Weld 1838-L is flowable. These epoxy adhesives are two-part,

More information

High-pressure (3000 p.s.i.) power washer with turbo tip. Condensation test material: Several one-foot square transparent pieces of plastic Duct tape

High-pressure (3000 p.s.i.) power washer with turbo tip. Condensation test material: Several one-foot square transparent pieces of plastic Duct tape Application Guide Type EP Epoxy Overview Supplies Needed Ramuc Type EP Epoxy offers a hard, tough, durable finish, providing stain, chemical, and abrasion resistance for protection of concrete, plaster,

More information

Alumigrip 4200 Application Process Instruction

Alumigrip 4200 Application Process Instruction Application Procedure Characteristics Product Information is a 3-component high solid durable polyurethane topcoat that provides premium gloss and distinctness of image (DOI) designed to meet and exceed

More information

INDUSTRIAL FLOORING INSTALLATION CHALLENGES. James C. Ziegler, ArmorSeal Product Manager Sherwin Williams Cincinnati, Ohio, USA

INDUSTRIAL FLOORING INSTALLATION CHALLENGES. James C. Ziegler, ArmorSeal Product Manager Sherwin Williams Cincinnati, Ohio, USA INDUSTRIAL FLOORING INSTALLATION CHALLENGES James C. Ziegler, ArmorSeal Product Manager Sherwin Williams Cincinnati, Ohio, USA Abstract: Specifier's and contractors not only need to properly evaluate the

More information

Extreme Sealing Tape

Extreme Sealing Tape Extreme Sealing Tape Technical Data January, 2013 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 34 C IED (2010/75/EU) (calculated)

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 34 C IED (2010/75/EU) (calculated) 408;21800;21820;21740;21760;21840 1,2 408 unsaturated vinyl ester ^(ValidationDate). 1 Product description This is a glass flake reinforced unsaturated vinyl ester coating. It is an ultra high build, extremely

More information

Additional Information. Paint Application

Additional Information. Paint Application Additional Information Paint Prepared by: International Paint Ltd. www.international-pc.com The information in this guideline is not intended to be exhaustive; any person using the product for any purpose

More information

5542/9000 Flame Retardant UV Resistant Varnish Semi Gloss

5542/9000 Flame Retardant UV Resistant Varnish Semi Gloss Flame Retardant UV Resistant Varnish Semi Gloss TECHNICAL DATA SHEET Product Description is a two component, transparent, semi-gloss acrylic urethane varnish designed to provide UV protection to external

More information

Epoxy Floor Coating Problem Solving Guide

Epoxy Floor Coating Problem Solving Guide Table of Contents: Page: Troubleshooting Issue: 2. Color Differential 3. Fish Eye 4. Milky or Cloudy Coatings 5. Orange Peel 6. Peeling or Delamination 8. Delamination between Coats 9. Pinholes/Bubbling

More information

MARTIN TESTING LABORATORIES (MTL) PAINTS AND COATINGS TESTING CAPABILITIES

MARTIN TESTING LABORATORIES (MTL) PAINTS AND COATINGS TESTING CAPABILITIES Liquid Coating Properties Composition VOC Content, ASTM D2369 Water Content, ASTM D4017 Physical Properties Calculating Physical Constants of Coatings, ASTM D5201 Density, ASTM D1475 Flash Point, ASTM

More information

3 Scotch-Weld TM. Urethane Adhesives 3532 B/A 3535 B/A 3549 B/A. Technical Data March, 2002

3 Scotch-Weld TM. Urethane Adhesives 3532 B/A 3535 B/A 3549 B/A. Technical Data March, 2002 3 Scotch-Weld TM Technical Data March, 2002 Product Description 3M TM Scotch-Weld TM 3532 B/A, 3535 B/A and 3549 B/A are two-component, polyurethane adhesives which cure at room temperature or with heat

More information

Permacron Base Coat FP 2003 Deep Black

Permacron Base Coat FP 2003 Deep Black Permacron Base Coat FP 2003 Deep Black GENERAL DESCRIPTION This special color is only supplied as a ready mix base coat under the number FP 2003. It is required for refinishing certain OEM colors (see

More information

POLYURETHANE LINING AND COATING ON PIPE RAW WATER

POLYURETHANE LINING AND COATING ON PIPE RAW WATER POLYURETHANE LINING AND COATING ON PIPE RAW WATER PART 1 -- GENERAL 1.1 THE REQUIREMENT A. The CONTRACTOR shall provide pipe coating, complete and in place, in accordance with the Contract Documents. 1.2

More information

A. The CONTRACTOR shall provide pipe coating, complete and in place, in accordance with the Contract Documents.

A. The CONTRACTOR shall provide pipe coating, complete and in place, in accordance with the Contract Documents. POLYURETHANE COATING ON STEEL PIPE PART 1 -- GENERAL 1.1 THE REQUIREMENT A. The CONTRACTOR shall provide pipe coating, complete and in place, in accordance with the Contract Documents. 1.2 REFERENCE SPECIFICATIONS,

More information

Extreme Sealing Tape

Extreme Sealing Tape Extreme Sealing Tape Technical Data October, 2011 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.

More information

Acrylic Enamel Topcoat

Acrylic Enamel Topcoat Acrylic Enamel Topcoat ACRYL-GLO TECHNICAL DATA SHEET The ACRYL-GLO single-stage acrylic enamel paint system provides a durable finish that is easy to apply and suitable for both commercial and passenger

More information

Epotec Primer Surfacer

Epotec Primer Surfacer Product Data 408 Epotec Primer Surfacer PRODUCTS Epotec Primer Surfacer Epotec Primer Hardener Thinners 408-Pack A 414-9105 Pack B R202-Normal conditions, R270-Hot conditions Product Description A polyamide

More information

STERI-SOFT HIGH FOOT TRAFFIC, ULTRAVIOLET RESISTANT, URETHANE RESILIENT FLOORING SYSTEM, 1/8 GREEN BUILDING FEATURES TYPICAL APPLICATIONS

STERI-SOFT HIGH FOOT TRAFFIC, ULTRAVIOLET RESISTANT, URETHANE RESILIENT FLOORING SYSTEM, 1/8 GREEN BUILDING FEATURES TYPICAL APPLICATIONS GREEN BUILDING FEATURES * Steri-Soft contributes toward satisfying credit EQ 4.2 under LEED. 100% Resilient Flooring Low emitting material Contains 27% post consumer recycled product Processed and manufactured

More information

AC Tech Project Survey

AC Tech Project Survey AC Tech Project Survey PROJECT NAME: DATE: PROJECT SIZE: EST. START DATE: I. Overview Successful projects depend on accurate and detailed information. The AC Tech Approved Applicator must obtain and record

More information

CORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS

CORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS AN ERGONARMOR COMPANY TECHNICAL INFORMATION SPECIFICATION FOR INSTALLATION 07/11 SUPERSEDES 04/00 PAGE 1 OF 6 CORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS 1. SCOPE 1.1 This specification

More information

Colorado State University. Durrell Center Roof Repair

Colorado State University. Durrell Center Roof Repair Colorado State University Durrell Center Roof Repair SPECIFICATION: POLYURETHANE FOAM ROOFING l.0 GENERAL REQUIREMENTS The successful application of a polyurethane foam roofing system is dependent upon

More information

VOLUME SOLIDS RECOAT TIMES MIN/MAX. Seaguard 5000 HS Red, Gray 73% 6 hours / 90 days Epoxy, Amine

VOLUME SOLIDS RECOAT TIMES MIN/MAX. Seaguard 5000 HS Red, Gray 73% 6 hours / 90 days Epoxy, Amine BALLAST TANKS Sherwin-Williams Marine Marine System System Specifications Specifications PRIMERS & TOPCOATS Ballast Tanks NAME COLORS VOLUME SOLIDS RECOAT TIMES MIN/MAX GENERIC TYPE FEATURES Seaguard 5000

More information

ARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials

ARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials ARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials SECTION 03 92 50 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings,

More information

RAPTOR TRUCK BED LINER - BLACK

RAPTOR TRUCK BED LINER - BLACK 4 x 750ml RAPTOR base coating x L RAPTOR hardener TECHNICAL DATA SHEET & U-POL s RAPTOR Truck Bed Liner is a durable K polyurethane coating that provides surfaces with a protective barrier. RAPTOR Tintable

More information

COLOR & COATING GUIDE >> A complete selection guide of Johnson Controls finishes

COLOR & COATING GUIDE >> A complete selection guide of Johnson Controls finishes COLOR & COATING GUIDE >> A complete selection guide of Johnson Controls finishes COLOR GUIDE AVAILABLE FINISH COLORS POLYESTER POWDER COAT #81 PALE BROWN #83 CHOCOLATE BROWN #85 TIMELESS BRONZE #70 BLACK

More information

Extreme Sealing Tape

Extreme Sealing Tape Extreme Sealing Tape Technical Data May, 2013 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications. The

More information

Imron 1.5 PR Waterborne Polyurethane Primer

Imron 1.5 PR Waterborne Polyurethane Primer Imron 1.5 PR Waterborne Polyurethane Primer GENERAL DESCRIPTION An isocyanate-free, single component, VOC conforming (1.5 lbs/gal), zero HAPs primer based on unique Axalta waterborne polyurethane copolymer

More information

Document Library TS Data Sheet 46012 46013 46014

Document Library TS Data Sheet 46012 46013 46014 Document Library TS Data Sheet 46012 46013 46014 Rev:2 Effective: 01/11/2002 3M Marine High Strength Repair Filler Data Sheet Status: Active 3M Part No.(s) 46012 46013 46014 3M Part Descriptor(s) Pint

More information

3M Scotchkote Urethane Coating 165HB

3M Scotchkote Urethane Coating 165HB 3M Scotchkote Urethane Coating 165HB Product Description 3M Scotchkote Urethane Coating 165HB is a two component 100% solids urethane coating used for the internal and external protection of steel and

More information

Application Instructions for Keystone Kool Deck on Existing Concrete

Application Instructions for Keystone Kool Deck on Existing Concrete Application Instructions for Keystone Kool Deck on Existing Concrete REQUIRED MATERIALS Keystone Kool Deck PTA Bonding Agent Water 20 Mesh Marble Sand White Portland Cement OPTIONAL TOOLS Mortex Ad-Tex

More information

Refining Corrosion Technologist NACE-RCT-001

Refining Corrosion Technologist NACE-RCT-001 Refining Corrosion Technologist NACE-RCT-001 NACE Coating Inspector Level 1 Written Exam Exam Preparation Guide May 2016 Exam Preparation Guide May 2016 1 Table of Contents Introduction... 3 Target Audience...

More information

Scotch-Weld TM. DP410 Off-White. Product Data Sheet. Product Description. Key Features Rapid cure at room temperature; cure rate may be accelerated

Scotch-Weld TM. DP410 Off-White. Product Data Sheet. Product Description. Key Features Rapid cure at room temperature; cure rate may be accelerated Scotch-Weld TM Product Data Sheet DP410 Off-White Supersedes: October 2001 Product Description DP410 epoxy adhesive is a low flow, two-part epoxy based structural adhesive. It is designed for use where

More information

3 Scotch-Weld TM. Structural Adhesive Films AF 6 AF 10 AF 13. Technical Data July, 2001

3 Scotch-Weld TM. Structural Adhesive Films AF 6 AF 10 AF 13. Technical Data July, 2001 3 Scotch-Weld TM Technical Data July, 2001 Introduction 3M Scotch-Weld AF 6, AF 10, AF 13 are unsupported, thermosetting adhesives in film form developed for the structural bonding of metals. These products

More information

PRODUCT DATA SHEET DESCRIPTION:

PRODUCT DATA SHEET DESCRIPTION: DESCRIPTION: SP-9888 Pipe Lining is based on the latest Zero VOC Novolac Technology. The product cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.

More information

PRODUCT DATA SHEET Sikafloor -81 EpoCem

PRODUCT DATA SHEET Sikafloor -81 EpoCem 3- PART CEMENT AND EPOXY COMBINATION MORTAR FOR SELF- SMOOTHING FLOOR SCREEDS OF 1.5 TO 3 MM DESCRIPTION New HC is a three part, epoxy modified cementitious, fine textured mortar for self smoothing floor

More information

LIFETM. "14" Series High Solids Epoxy Concrete Sealer. Product Specifications

LIFETM. 14 Series High Solids Epoxy Concrete Sealer. Product Specifications LIFETM Product Specifications "14" Series High Solids Epoxy Concrete Sealer Description: A premium quality 2-part water base epoxy concrete sealer that provides epoxy toughness, chemical resistance and

More information

Installation System. Existing Resilient Sheet Floors

Installation System. Existing Resilient Sheet Floors Vinyl Composition Tile Installation System Product Adhesive/Full Spread Adhesive/Tile-On Comment Imperial Texture MultiColor RAVE Stonetex Companion Square Feature Tile/Strips ARTEFFECTS SAFETY ZONE Vinyl

More information

Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests

Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages

More information

3 Scotch-Weld TM. Urethane Adhesives 3532 B/A 3535 B/A 3549 B/A. Technical Data January, 2010

3 Scotch-Weld TM. Urethane Adhesives 3532 B/A 3535 B/A 3549 B/A. Technical Data January, 2010 3 Scotch-Weld TM Technical Data January, 2010 Product Description 3M Scotch-Weld 3532 B/A, 3535 B/A and 3549 B/A are two-component, polyurethane adhesives which cure at room temperature or with heat to

More information

3 Scotch-Weld TM. Epoxy Adhesive DP110 Translucent and Gray. Technical Data December, 2009

3 Scotch-Weld TM. Epoxy Adhesive DP110 Translucent and Gray. Technical Data December, 2009 3 TM Technical Data December, 2009 Product Description 3M are two-part epoxy adhesives which combine a fast cure with flexibility. Features Controlled flow 20 minute handling strength Duo-Pak cartridge

More information

PAINTING OF CLARIFIER

PAINTING OF CLARIFIER 1 PAINTING OF CLARIFIER PART 1 GENERAL 1.01 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required for the surface preparation and application of shop painting systems on ferrous

More information

ADVANTAGES & DISADVANTAGES OF COATING TYPES

ADVANTAGES & DISADVANTAGES OF COATING TYPES ADVANTAGES & DISADVANTAGES OF COATING TYPES NITROCELLULOSE LACQUERS These are 1-component products, which dry by evaporation of solvents. 1-component easy to apply quick-drying easy to repair good clarity

More information

RTV88. RTV88 Silicone Rubber Compound for High Temperature

RTV88. RTV88 Silicone Rubber Compound for High Temperature Silicone Rubber Compound for High Temperature Product Description silicone rubber compound is a high temperature two-part silicone elastomer. It is supplied ready-to-use with a base compound and DBT (dibutyl

More information

Construction. Sikadur-Combiflex. Sealing system for cracks and problem joints with large movements DESCRIPTION

Construction. Sikadur-Combiflex. Sealing system for cracks and problem joints with large movements DESCRIPTION Sikadur-Combiflex REVISED JULY 2002 Sealing system for cracks and problem joints with large movements Construction DESCRIPTION USES ADVANTAGES The Sikadur-Combiflex joint sealing system consists of two

More information

Material Product Data Sheet Sealers for Thermal Spray Coatings

Material Product Data Sheet Sealers for Thermal Spray Coatings Material Product Data Sheet Sealers for Thermal Spray Coatings Thermal Spray Products: AP, APT Thinner, ERS, SA, URS, Metco 185 Sealer 1 Introduction Sealers are materials that penetrate the pores of thermal

More information

PRODUCT DATA SHEET Sika Cable System

PRODUCT DATA SHEET Sika Cable System PRODUCT DATA SHEET Corrosion protection for bridge cables of steel and galvanized steel PRODUCT DESCRIPTION The Sika Cable System consists of coating materials as well as a sealing respectively injection

More information

Technical Data SeaQueen

Technical Data SeaQueen Technical Data SeaQueen Product description Antifouling SeaQueen is a tin free self-polishing antifouling based on a copolymer binder. IMO Anti-fouling System Convention compliant (AFS/CONF/26). Recommended

More information

UDF-21 for decks. 21POLYPLUS TM for marine pilings.

UDF-21 for decks. 21POLYPLUS TM for marine pilings. UDF-21 for decks. 21POLYPLUS TM for marine pilings. Compare Ultimate Coatings to your favorite coating and you ll see the value! Features and Benefits (check all that apply) UF Coatings A Do-It-Yourself

More information

TIGER Drylac U.S.A., Inc. 3855 Swenson Avenue St Charles, IL T 800 243 8148 F 877 926 8148 office.us@tiger-coatings.us www.tiger-coatings.

TIGER Drylac U.S.A., Inc. 3855 Swenson Avenue St Charles, IL T 800 243 8148 F 877 926 8148 office.us@tiger-coatings.us www.tiger-coatings. Product Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90500) Epoxy zinc-rich powder coating primer. Part of a two-coat TIGER Shield system. Designed to impart superior corrosion protection to steel

More information

SYNTHEMUL 90-416 Product Code: 90416-00 All-Acrylic Latex SEMI-COMMERCIAL

SYNTHEMUL 90-416 Product Code: 90416-00 All-Acrylic Latex SEMI-COMMERCIAL APRIL 2005 SYNTHEMUL 90-416 Product Code: 90416-00 All-Acrylic Latex SEMI-COMMERCIAL DESCRIPTION SYNTHEMUL 90-416 is high-performance; ultra-low VOC acrylic latex ideal for cosolvent-free exterior house

More information

BRIDGE FIELD PAINTING, REPAINTING, 412 AND PAINT RESIDUE CONTAINMENT. A. Field Painting, Bridge Repainting and Residue Containment:

BRIDGE FIELD PAINTING, REPAINTING, 412 AND PAINT RESIDUE CONTAINMENT. A. Field Painting, Bridge Repainting and Residue Containment: 412.1 DESCRIPTION BRIDGE FIELD PAINTING, REPAINTING, 412 This specification contains the requirements for the removal, containment, and disposal of existing paint on steel surfaces, preparing the steel

More information

Vinyl Composition Tile Installation System

Vinyl Composition Tile Installation System Vinyl Composition Tile Installation System Product Gauge Size Vinyl No-Wax (Dry Back) Urethane No-Wax (Dry Back) 0.045" (1.1 mm) 0.080" (2.0 mm) IMPERIAL TEXTURE 0.094" (2.4 mm) STONETEX ChromaSpin COMPANION

More information

SECTION 3 CONCRETE Section Concrete Rehabilitation

SECTION 3 CONCRETE Section Concrete Rehabilitation Spec Component: SC-133-03/10 Sika MonoTop 611 SECTION 3 CONCRETE Section 03730 - Concrete Rehabilitation Part 1 General 1.01 Summary This specification describes the filling of cavities, void, etc. with

More information

Urethane Cement System

Urethane Cement System Installation Instructions Urethane Cement System NeverStrip Self-Leveling, Textured Urethane Cement System ( Urethane Cement ) I. General Information NeverStrip Self-Leveling, Textured ( Urethane Cement

More information

Division 9. SignaFlor Pad and Pour Flooring System

Division 9. SignaFlor Pad and Pour Flooring System Division 9 SignaFlor Pad and Pour Flooring System SPECIFICATIONS Page 1. General... 2 1.1 Description 2 1.2 Quality Assurance 2 1.3 Submittals 2 1.4 Delivery and Storage 3 1.5 Warranty 3 1.6 Working Conditions

More information

SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND.

SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND. SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND. 623.10.1 Description. This work shall consist of preparing the surface,

More information

SECTION 560 COATING NEW STRUCTURAL STEEL

SECTION 560 COATING NEW STRUCTURAL STEEL 560 COATING NEW STRUCTURAL STEEL. (REV 10-1-132911121-131416-1213) (FA 1-162-1-13) (7-13) SECTION 560 COATING NEW STRUCTURAL STEEL 560-1 Description Coat new structural steel in accordance with the requirements

More information

PRODUCT DATA SHEET SP-4888 DAMP SURFACE COATING

PRODUCT DATA SHEET SP-4888 DAMP SURFACE COATING DESCRIPTION: ADVANTAGES: USES: APPLICATION: SP-4888 Damp Surface Coating is a two-component epoxy coating developed specifically for application on wet or damp steel surfaces. In addition, it may be applied

More information

Document Library TS Data Sheet 08609. 3M Windo-Weld Super Fast Urethane. Data Sheet. Public

Document Library TS Data Sheet 08609. 3M Windo-Weld Super Fast Urethane. Data Sheet. Public Document Library TS Data Sheet 08609 Public Rev:3 Effective: 09/14/2007 Status: Active 3M Windo-Weld Super Fast Urethane Data Sheet 3M Part No.(s) 3M Part Descriptor(s) 08609 3M Windo-Weld Super Fast Urethane

More information

CHROMABASE 4 TO 1 CLEARCOAT CUSTOMIZATION

CHROMABASE 4 TO 1 CLEARCOAT CUSTOMIZATION CHROMABASE 4 TO 1 CLEARCOAT CUSTOMIZATION GENERAL DESCRIPTION The unique design of ChromaBase 4 to 1 clearcoats allows you to customize clearcoat performance to suit your individual needs. Clearcoat attributes,

More information

SECTION 03 54 00 RESURFACING CAST IN PLACE CONCRETE

SECTION 03 54 00 RESURFACING CAST IN PLACE CONCRETE Page 1 SECTION 03 54 00 RESURFACING CAST IN PLACE CONCRETE Specifier Notes: This guide specification is written according to the Construction Specifications Institute (CSI) format. The section must be

More information

FM 300-2 FILM ADHESIVE

FM 300-2 FILM ADHESIVE FM 3002 FILM ADHESIVE DESCRIPTION FM 3002 film adhesive is a cure version of Cytec Engineered Materials widely used FM 300 film adhesive. It delivers the same superior high temperature performance, toughness

More information

3.8 HSP (High Solids Polyurethane)

3.8 HSP (High Solids Polyurethane) Description is a single-stage topcoat designed for commercial and automotive refinishing. This product provides Superior UV durability as well as commercial grade chemical resistance. 3.8 HSP has excellent

More information

ASPHALT CEMENTS & COATINGS. Protective Asphalt Coatings Asphalt Primers Aluminum Coatings

ASPHALT CEMENTS & COATINGS. Protective Asphalt Coatings Asphalt Primers Aluminum Coatings ASPHALT CEMENTS & COATINGS Roof Mastics Protective Asphalt Coatings Asphalt Primers Aluminum Coatings ROOF MASTICS #211 Plastic Cement Mule-Hide #211 Plastic Cement is a general purpose formulation for

More information

3 Scotch-Weld TM. Epoxy Adhesive EC-3333 B/A. Technical Data May 2010

3 Scotch-Weld TM. Epoxy Adhesive EC-3333 B/A. Technical Data May 2010 3 Scotch-Weld TM Epoxy Adhesive EC-3333 B/A Technical Data May 2010 Introduction 3M Scotch-Weld is a two-component epoxy adhesive which cures at room temperature or with heat to form a tough, impactresistant

More information

Scotch-Weld. Low-Odor Acrylic Adhesives DP810 DP810 NS. Technical Data June, 2004

Scotch-Weld. Low-Odor Acrylic Adhesives DP810 DP810 NS. Technical Data June, 2004 3 Scotch-Weld TM Technical Data June, 2004 Product Description 3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 and DP810 NS are twopart, 1:1 mix ratio, toughened structural adhesives with less odor than

More information

GRIP-GARD BC BASECOAT CHROME

GRIP-GARD BC BASECOAT CHROME Description Grip-Gard BC Basecoat Chrome is designed specifically to meet the color, application and quality demands of the Sign and Exhibit Manufacturer. Grip-Gard BC Basecoat Chrome is ideal for fast

More information

Backstop NT. Backstop NT Application Instructions DS181. A High Performance, Polymer-Based, Noncementitious Water-Resistive Membrane and Air Barrier

Backstop NT. Backstop NT Application Instructions DS181. A High Performance, Polymer-Based, Noncementitious Water-Resistive Membrane and Air Barrier Backstop NT A High Performance, Polymer-Based, Noncementitious Water-Resistive Membrane and Air Barrier Backstop NT Application Instructions CHECKLIST PRIOR TO THE INSTALLATION OF BACKSTOP NT TEXTURE,

More information

Adhesive Recommendation for Altro Flooring. Porous (absorbent) subfloors (most wood subfloors and some concrete)

Adhesive Recommendation for Altro Flooring. Porous (absorbent) subfloors (most wood subfloors and some concrete) Adhesive Recommendation for Altro Flooring Product Safety Sheet Flooring Smooth Sheet Flooring Porous (absorbent) subfloors (most wood subfloors and some concrete) Altrofix 30/31 (excessively heavy rolling

More information

Wecryl Waterproofing System under surfacing supplied by others

Wecryl Waterproofing System under surfacing supplied by others Brief description The Wecryl waterproofing system allows a high-quality, seamless and crack-bridging waterproofing layer to be installed under loose-laid or bonded surfacing supplied by others (stone slabs,

More information

Imron 1.2 HG High Gloss Waterborne Polyurethane (WG Quality)

Imron 1.2 HG High Gloss Waterborne Polyurethane (WG Quality) Imron 1.2 HG High Gloss Waterborne Polyurethane (WG Quality) GENERAL DESCRIPTION An isocyanate-free, high gloss, single component, VOC conforming (1.2 lbs/gal), zero HAPs coating based on unique Axalta

More information

Crystal Clear Sealant

Crystal Clear Sealant Crystal Clear Sealant Technical Data February, 2012 Product Description 3M Crystal Clear Sealant is a one component thermoplastic elastomer which forms permanent elastic bonds when used in surface sealing

More information

Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard

Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n

More information

THERMOTEK MODIFIED BITUMEN TORCH MEMBRANE OVER

THERMOTEK MODIFIED BITUMEN TORCH MEMBRANE OVER THERMOTEK MODIFIED BITUMEN TORCH MEMBRANE OVER DESCRIPTION TORCH OVER (15,17,19 YR) TH/BS-TH/CS 2 1 0 No 0. SUBSTRATE 1. THERMOTEK USA 2.0 FV TORCH SMOOTH 2. THERMOTEK USA PRO FP TORCH GRANULE COMPONENTS

More information

Product Information. D8115 Matte and D8117 Semi-Gloss Clearcoat System

Product Information. D8115 Matte and D8117 Semi-Gloss Clearcoat System Product Information D8115 Matte and D8117 Semi-Gloss Clearcoat System Product Description D8115 Matte and D8117 Semi-Gloss Clearcoats are designed for use over Envirobase High Performance Waterborne, Global

More information

CROWN PAINTING SCHEDULE

CROWN PAINTING SCHEDULE CROWN PAINTING SCHEDULE ALL PAINTS AVAILABLE THROUGH SHERWIN-WILLIAMS PAINT STORES. PLEASE GO TO sherwinwilliams.com store locator to find the store closest to you. These paints are mainly commercial/industrial

More information

Scotch-Weld. Epoxy Adhesive. DP190 Translucent and Gray. Technical Data April, 2010

Scotch-Weld. Epoxy Adhesive. DP190 Translucent and Gray. Technical Data April, 2010 3 TM Technical Data April, 2010 Product Description 3M Epoxy Adhesive is a 1:1 mix ratio similar to 3M Epoxy Adhesive 2216 B/A Translucent but faster curing. 3M Epoxy Adhesive is a 1:1 by volume mix ratio

More information