Prepared by : Marketing Department Edition : 2012
|
|
|
- Chester Gilmore
- 7 years ago
- Views:
Transcription
1 Prepared by : Marketing Department Edition : 2012
2 HISTORICAL OVERVIEW For more than 20 years, EPPM present structure has been active in Tunisia and abroad in Engineering, Procurement, Construction, Management as well as turnkey projects. Established in 1993 by a group of experienced managers and engineers, who brought their know-how, skills and acquired experience, EPPM has been developed from a national to an international company. The number of employees increased from20 to 600 permanent employees. Currently, EPPM, throughout its qualified team, can manage and take over international projects of around 100 Million USD
3 Tunisia Iraq Algeria Libya Saudi Arabia Sudan Sultanate of Oman Angola Worldwide Experience & Worldwide Spread EPPM GROUP EPPM, is a privately owned company with headquarters in Tunis, it has also subsidiaries and offices around the world. Over almost 20 years of worldwide experience, committed to satisfy all stakeholders, EPPM has continuously developed over years its large experience in Tunisia and abroad. EPPM succeeds its international experience thanks to the involvement of local manpower along with the know-how transfer with local companies, suppliers and improvement of competencies and expertise. This means that we are adhering to the highest standards of local content.
4 WHO WE ARE EPPM is an EPC contractor acting in three main sectors, namely the Oil and Gas, the Water Treatment and the Industry. EPPM provides a wide range of services including : Engineering Services, Procurement Services, Project Management, Construction Services, Commissioning & Start-up, Operating & Maintenance.
5 EPPM is involved in all projects phases whether it concerns engineering or turn key projects to provide services of: PREFEASIBILITY / FEASIBILITY STUDIES Process philosophy, CAPEX / OPEX estimation, Rentability analysis, Business plans CONCEPTUAL DESIGN Process design philosophy Process Calculations, PFD s, E & I design philosophies Mechanical and layout design BASIC DESIGN Process Simulation Equipment sizing Line sizing PFD s & P&ID s Heat & material balance Process equipment specs Mechanical equipment specs Piping design specs and arrangement drawings E& I specs & guide drawings Civil specs & guide drawings DETAILED DESIGN All detailed drawings and data sheets Piping installation and isometrics Mechanical design calculations & drawings E & I calculations & drawings O & M manuals As built drawings SITE ENGINEERING Fabrication drawings Work packs preparation & material tracking Drawings markups for as built ENGINEERING SERVICES
6 SOFTWARE To achieve all kinds of projects, EPPM uses well-known software; PROCESS OIL & GAS HYSYS PIPESIM OLGA SURGE AVEVA DIAGRAM ( P&ID S ) CADWORX P&ID S IN HOUSE PROGRAMS - Flare Sizing - PSV Sizing - Separator Sizing, etc. PROCESS WATER TREATMENT CARROUSSEL DGEST AFT IMPULSE MECHANICAL / MATERIALS ENGINEERING RESOURCES CAESAR II V.5.2 COMPRESS ORCALAY In House Programs - Tanks, - Piping Sizing, - PL Stability analysis, etc. HUMAN RESOURCES The Permanent Engineering production capacity is around hours/year (~196 people) covering all engineering disciplines required for any project design. This capacity can be increased up to hours/year (~300 people). Breakdown of Engineering Human Resources per Discipline Lead Engineers Engineers Designers Process Mechanical & Piping Electrical & Instrumentation Civil / Streel Structure Corrosion / Cathodic Protection HSE PIPESIM OLGA AFT IMPULSE CAESER II COMPRESS
7 ELECTRICAL CANECO BT ETAP DIALUX, CALCULUX MY ECODIAL V3.4 CONTROL AND AUTOMATION SMART PLANT INSTRUMENTATION (SPI) V2008 PIPING & INSTALLATION DESIGN 3 D Modeling - AVEVA PDMS - CADWORX Plant Pro 2 D Modeling - AUTOCAD - ISOCAD CIVIL & STRUCTURAL Design Calculations - Robot structural analysis - ARCHE - EFFEL Drafting - RCAD formwork - RCAD reinforcement - RCAD steel - COVADIS SITE SURVEYS FARO LAZER SCAN LMI CANECO ETAP SPI ROBOT COVADIS
8 HOW TO FIND OUT MORE ABOUT If you would like to find out more about our Brochures and Presentations, please visit our website If you would like to find out more about our Engineering Services, please visit our website For Information on how to contact EPPM Group, please visit our website
Engineering Capability Presentation 02-Feb-2015
Engineering Capability Presentation About Pyramid E&C Est. 1995, professionally managed Company Over 500 projects executed till date Employs over 600 Engineers and Construction Staff Main operations in
ENGINEERING & CONSULTANCY
ENGINEERING & CONSULTANCY COMPANY PROFILE A T E C Nand Jyot Industrial Estate, 1ST Floor, Unit F-12, Near Sakinaka Tel. Exchange, ABOUT ATEC ATEC is a Company with Talented Team of Professionals from various
Engineering g Procurement. 02-Feb-2015
Engineering g Procurement Construction & Operation Capability Presentation About Pyramid E&C Est. 1995, professionally managed Company Over 500 projects executed till date Employs over 600 Engineers and
Exceptional... Everytime!
Oil & Gas Exceptional... Everytime! Oil & Gas Industry With each Team Leader possessing 10 20 Years experience, BAR Engineering not only contributes high level engineering expertise, but also the practical
INTERTEK S ASSET INTEGRITY MANAGEMENT PROGRAM (AIM)
INTERTEK S ASSET INTEGRITY MANAGEMENT PROGRAM (AIM) Intertek AIM is a strategic management system consisting of specialized expertise, resources methodologies, and tools to assist production and process
Plant Design for Oil & Gas Industry Client
Plant Design for Oil & Gas Industry Client An Enventure Case Study Enventure with its team of engineers having multi-disciplinary skills provided complete plant design, detailing and procurement services
Brochure. Projects and engineering Engineering expertise to enhance your operations
Brochure Projects and engineering Engineering expertise to enhance your operations Overview Do you need to deliver plant upgrades but find them disruptive and lack the resources? Are you concerned about
Experience and Qualifications of PROCESS PLANTS CORPORATION
Experience and Qualifications of PROCESS PLANTS CORPORATION Table of Contents Section 1. Project Services pg 3-20 Engineering Services Project management Design engineering Design management Construction
Guidelines for FEASIBILITY STUDY
Guidelines for FEASIBILITY STUDY INTRODUCTION This document describes the best practices to be followed during the preparation of a Feasibility Study for the Facilities Development of an upstream asset.
OVERVIEW OUR MISSION PROJECT IMPLEMENTATION PLANT MANAGEMENT INFORMATION SYSTEMS
OVERVIEW As one of the most important players on the local market for project engineering solutions, Engineering SRL offers multidisciplinary services for Process Industry. PROJECT IMPLEMENTATION Established
What will it be; define the value
Level 2 Frame Facility: Greenfield Power Plant with Carbon Capture All 6 Project Phases All aspects for the relevant facility Stage Identify (Concept Study) Evaluate (Pre-Feasibility Study) Define (Feasibility/FEED
Reduce Capital Cost Overruns with Repeatable Engineering Designs
WHITE PAPER Reduce Capital Cost Overruns with Repeatable Engineering Designs by Ron Beck, Industry Marketing Director, Aspen Technology, Inc. The use of standardized and modular designs to reduce engineering
Bayer Technology Services
Bayer Technology Services Company Profile 2013 (updated 1-Mar-2014) Page 1 Facts & Figures Portfolio Page 2 Bayer Technology Services a Bayer Subsidiary Holding company Group Management Board Bayer AG
Training for Operations and Maintenance
Oil and Gas Training and Competency Development Training for Operations and Maintenance Developing technical skills and building practical experience for E&P teams and professionals Training that meets
CAD/CAE systems and cost engineering
CAD/CAE systems and cost engineering The purpose of this article is to explain how total life-cycle solutions can help engineering procurement and construction and plant owner companies meet today s business
A Leading Provider of Engineering Information Management Solutions and Services. Facilitating multi-office, multi-contractor execution strategies
A Leading Provider of Engineering Information Management Solutions and Services Facilitating multi-office, multi-contractor execution strategies Engineering projects are increasingly becoming more complex
Setting a New Standard for 2D Design
Setting a New Standard for 2D Design Plant Design Software Suite VERSION 2008 Raising the Bar on Piping Design By combining proven technologies with AutoCAD s advanced graphics engine, PROCAD has created
A FOCUSED APPROACH. Industry Experience
A FOCUSED APPROACH MDM Engineering is a minerals process engineering and project management company, operating from South Africa. We have a proven track record of more than 24 years experience and are
Setting a New Standard for 2D Design
Setting a New Standard for 2D Design Plant Design Software Suite VERSION 2008 Raising the Bar on Piping Design By combining proven technologies with AutoCAD s advanced graphics engine, PROCAD has created
BONATTI: COMPANY OVERVIEW
BONATTI: COMPANY OVERVIEW Bonatti is an International General Contractor which provides Engineering, Procurement, Construction and Operation & Maintenance Services to the Oil & Gas and Power Industry.
How To Manage A Project
Project Management - Maintenance Management p. 105 to 112 Project Management - Maintenance Management PGP / OCP-E PGP / OCP Project Management Major Grassroots Projects 5 Days Level: Foundation To provide
Aerni consulting services
Aerni consulting services Cost reduction/ Cost estimating Zürich/Maur, 2010 1 Content 1 Experience and current situation 2 Process- and 3D-object oriented cost models 3 Possible services and results 4
TURKISH CONTRACTING IN THE INTERNATIONAL MARKET
Brief overview TURKISH CONTRACTING IN THE INTERNATIONAL MARKET Construction plays a crucial role in Turkey s economic development, accounting for 5.9% of GDP and employing some 1.8 million people. When
Provide Outsourcing services In the areas of Engineering Design & Project Management Consultancy Services
Indian Pride in Engineering and Consultancy Provide Outsourcing services In the areas of Engineering Design & Project Management Consultancy Services CON S S Business Objectives Multi-discipline Engineering
3Dcities INDIA. www.3dcindia.com. Architecture and Engineering Outsourcing Company since 1999
3Dcities INDIA Architecture and Engineering Outsourcing Company since 1999 www.3dcindia.com We are an India based organisation provides a range of products and services linked to our core discipline of
ASSET. Unlock the power of your Digital Asset
Unlock the power of your Digital Asset What is the Digital Asset? The Digital Asset is the information core of every project and facility. It is the unification of the trusted information that flows through
How To Use The Standard Database For Smartplant Reference Data
WHITE PAPER Standard Database for SmartPlant Reference Data Contents 1. Introduction... 2 2. SmartPlant Reference Data... 3 3. Standard Database for SmartPlant Reference Data... 4 3.1 Out-of-the-box Productivity...
Powerful information management services and software for the oil, gas, and chemical industries
Powerful information management services and software for the oil, gas, and chemical industries RELIEF SYSTEM SERVICES Provenance Consulting has relief system design experience in all aspects of the petrochemical
ARC Industry Forum, Orlando 2/13/2014. Overview. Martin Swaine 4D Program Manager, Shell P&T (Projects & Technology) Shell International
ARC Industry Forum, Orlando 2/13/2014 Overview Martin Swaine 4D Program Manager, Shell P&T (Projects & Technology) Shell International 2001, CII Formed Fiatech Realize Best of What Is! Realize Best of
Technology based Project Management Consulting (T-PMC): Innovate to Reduce Costs
Technology based Project Management Consulting (T-PMC): Innovate to Reduce Costs Graham Freeth, North African Oil and Gas Summit, Tunis, Tunisia October 2009 J P Kenny Offices World Wide Aberdeen Stavanger
Our business approach Technip PMC
Our business approach Technip PMC Project Management Consultancy Services: Ensuring Safe and Successful Execution of Your Projects Technip at a glance Technip is a world leader in project management, engineering
Efficiency in turnkey solutions
Efficiency in turnkey solutions Technology, mechanical engineering, automation, electrical engineering and turnkey capability from a single source your competitive edge powered by our unique knowledge
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 23 Rev: 01 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 DEFINITIONS
TLHAMATSI AFRICA PROJECTS CONSTRUCTION MANAGEMENT PRESENTATION. PRESENTED BY: BAKANG MOENG info@tlhamatsi.co.za
TLHAMATSI AFRICA PROJECTS CONSTRUCTION MANAGEMENT PRESENTATION PRESENTED BY: BAKANG MOENG info@tlhamatsi.co.za CONSTRUCTION MANAGEMENT - DEFINED Act of managing the construction process Contractual arrangement
THE FOREIGN DIRECT INVESTMENT FEASIBILITY STUDY
THE FOREIGN DIRECT INVESTMENT FEASIBILITY STUDY DeRuiter Consultancy International Market & Investment Surveyors THE PREPARATION OF A FEASIBILITY STUDY FOR A FOREIGN DIRECT INVESTMENT DeRuiter Consultancy
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 50 Project Engineering Standard www.klmtechgroup.com AUGUST 2011 KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE
Biturox Bitumen Processing Units
Biturox Bitumen Processing Units PÖRNER GRUPPE Pörner Ingenieurgesellschaft mbh A-1050 Vienna, Hamburgerstrasse 9, Tel. +43 5 05899-0, Fax +43 5 05899-99 www.poerner.at Seite 1 von 5 Guro Gobind Singh
FASTER TIME-TO-MARKET FOR CAPITAL PROJECTS
FASTER TIME-TO-MARKET FOR CAPITAL PROJECTS K NOWBE S BUSINESS 1. EPC: Turnkey EPC with emphasis on automation of workflow to accelerate time-to-market 2. Fabrication: modular fabrication shop (Salt Lake
What we do Doing Engineering services as General Construction (G.C). Civil Works and other related industries. E, EP, P, EPC, EPCC, EPCF Contractor.
Persian Rad Grouh Persian Rad Grouh is an Engineering, Procurement, Construction and project management company with over 200 highly skilled personnel specialized in Oil, Gas and Petrochemical Projects.
PROJECT DESIGN DELIVERABLES SEQUENCE (PDD)
PROJECT DESIGN DELIVERABLES SEQUENCE (PDD) INTRODUCTION There are several reasons which lead to delay in project completion, out of all, one main reason is delay in deliverable processing i.e., submission
Steelmaking Technology Consulting
siemens-vai.com Steelmaking Technology Consulting Expert assistance for performance improvement in steelmaking Answers for industry. Steelmaking Technology Consulting Expert advice for production excellence
Engineering Procurement Construction Quality Plan
Engineering Procurement Construction Quality Plan Index 1 Introduction... 4 1.1 Project Background... 4 1.2 Document Purpose... 4 1.3 Change Control... 4 1.4 Contract... 4 1.5 Quality system... 4 1.6 Distribution...
INTERGRAPH 2010 Japan. 20-21 July Yokohama, Japan 86% Loaded. Pan Pacific Yokohama 220-8543 Yokohama 2-3-7, Minato Mirai Nishi-ku, Japan
INTERGRAPH 2010 Japan 20-21 July Yokohama, Japan 86% Loaded Pan Pacific Yokohama 220-8543 Yokohama 2-3-7, Minato Mirai Nishi-ku, Japan A WORLD OF OPPORTUNITIES , 2010 Day two keynotes Time 10:00am 10:15am
Powering up your ENERGY business processes
Powering up your ENERGY business processes Powering up your ENERGY business processes In these diffi cult economic times where ecological concerns are rapidly increasing, companies race to optimize performance
Pipeline Engineering. Natural Gas Distribution
R Pipeline Engineering Natural Gas Distribution Gas Distribution Engineering Services Our team of professionals at EN Engineering has been designing, upgrading and maintaining distribution system assets
Drawings for Pipe Installation
TRADE OF Pipefitting PHASE 2 Module 5 Technical Drawing UNIT: 4 Produced by In cooperation with subject matter expert: Finbar Smith SOLAS 2014 Table of Contents Unit Objective... 1 Learning Outcome...
Complex engineering objects construction using Multi-D innovative technology
Complex engineering objects construction using Multi-D innovative technology Interregional Knowledge Management Workshop on Life Cycle Management of Design Basis Information Issues, Challenges, Approaches
GCC Pharmaceutical Industry
GCC Pharmaceutical Industry First coordination meeting for the pharmaceutical industry in the GCC and Yemen Dr. Aasim Qureshi 11 April 2011 Global Pharmaceuticals Industry The pharmaceutical industry is
UNLOCKING MAJOR COST SAVINGS ON OIL & GAS PROJECTS
UNLOCKING MAJOR COST SAVINGS ON OIL & GAS S $ RESPONDING TO A LOW-PRICE OIL ENVIRONMENT THE BENEFITS OF EARLY INVOLVEMENT: In our experience early involvement on a project is key when it comes to securing
SMARTPLANT ENTERPRISE
INDUSTRY SMARTPLANT ENTERPRISE For the Metals and Mining Industry INDUSTRY CHALLENGES Metals and mining facilities are increasingly complex and large in scope, with mega-projects becoming the norm. There
Mechanical Engineer. Process Engineer. Civil Engineer. PFD 001 - Inlet works and screening 40.0 27. PFD 002 - Membrane Bioreactor 34.
1.00 Site Visit / Data Gathering Scope definition & design verification,inspection of the site, Collation of information, Condition report and priorities, Cost estimates and Preliminary programme 35.5
Software solutions from Integrated Engineering to Integrated Operations
siemens.com/comos Software solutions from Integrated Engineering to Integrated Operations COMOS Making data work. Answers for industry. Basic Engineering First choice for comprehensive plant project COMOS
Front End Engineering Design Capabilities
Front End Engineering Design Capabilities Why EMERSON? Aligning your project and business objectives while creating a solid, detailed project foundation begins with a Front End Engineering Design (FEED)
Middle East and North African Steel Markets to 2020
Receive a complimentary Metal Bulletin Research 2008 Middle East Steel map RRP 295 The most comprehensive research done to date about the Middle East steel market. George Matta, Ezz Steel A Strategic Outlook
PLANT DESIGN AT YOUR FINGERTIP
intergraph Cadworx & analysis Solutions PLANT DESIGN AT YOUR FINGERTIP Introduction The use of intelligent plant design tools is an obvious choice for most medium- and large-sized engineering companies
Human Resource & Training Solutions
For Pace & Precision Human Resource & Training Solutions Nov.2015 TECHMA GROUP Overview Part of a renowned Group, we specialize in Turnkey Staffing, Turnkey HR Services, Executive Search, Training and
Darchem Thermal Protection
Darchem Thermal Protection Engineered Materials Thermal and Fire Protection for life www.darchem.co.uk Introduction to Darchem Thermal Protection Darchem Thermal Protection is world renowned for the design,
Asset Management Conformity Assessment Fitness for Service QHSE. Oil & Gas Services and Tools. For the benefit of business and people
Asset Management Conformity Assessment Fitness for Service QHSE Oil & Gas Services and Tools For the benefit of business and people Services along the whole life of Facilities Bureau Veritas services can
Company Presentation
Company Presentation Founded in 1977 Brief Profile Acquired on January 2012 by Hidada Ltd-Jeddah, KSA On June 2012 incorporated GICOTECNICA Canada Develops feasibility studies, engineering, procurement
Our mission is to be a solid and flexible partner by delivering unique and challenging projects. We are present in OFFSHORE OIL & GAS
Our mission is to be a solid and flexible partner by delivering unique and challenging projects. We are present in OFFSHORE OIL & GAS three market segments; Offshore Wind, Offshore Oil & Gas and Civil
PISTEP WHYSTEP? The Background. What information are we talking about?
PISTEP WHYSTEP? The Background Companies that operate in the process industries are under ever-increasing pressure from; competition the need to drive down costs timescales the need to achieve results
PROPROCESS SERVICES & CAPABILITY STATEMENT
PROPROCESS SERVICES & CAPABILITY STATEMENT 1 INTRODUCTION Professional Process Consultants (PPC) is a process focused engineering firm, able to contribute to a project at any stage of development, from
Practical Strategy and Workflow for Large Projects: A Realistic Solution
Practical Strategy and Workflow for Large Projects: A Realistic Solution Marco Brasiel/Diego Faria Frazillio & Ferroni SE3193 This class presents a strategy for development of structural projects using
Olilo's AEC Design Services. SrinSoft Inc, Partners of
Olilo's AEC Design Services SrinSoft Inc, Partners of Olilo provides design services that include design and analysis, cost estimation, 3D modeling, 2D drafting, conversion from 2D to 2D, quantity take-off,
MINISTRY OF ECONOMY. TURKISH ENGINEERING CONSULTANCY SECTOR An overview
MINISTRY OF ECONOMY TURKISH ENGINEERING CONSULTANCY SECTOR An overview 1 Turkish Overseas Contracting and Engineering Services Sector have undertaken 7051 projects in 100 countries with morethan 245.7
SMARTPLANT ENTERPRISE
SOLUTION SMARTPLANT ENTERPRISE 3D Modeling & Visualization INDUSTRY CHALLENGES Plant owner operators (O/Os) and engineering, procurement, and construction (EPC) companies alike are under continued pressure
WISI - ABB Water Industrial Sector Initiative Introducing ABB Water for Process Industry. ABB Group July 29, 2009 Slide 1
WISI - ABB Water Industrial Sector Initiative Introducing ABB Water for Process Industry ABB Group July 29, 2009 Slide 1 Sustainable Water Use in Process Industries What is Sustainability? Sustainability
Engineering Software Enables Designing for the Deep
An Industry White Paper By Kevin Gomez, Editor PACE Magazine, Cirrus Media, Australia The content of this paper originally appeared in PACE Magazine, February 26, 2013. www.pacetoday.com.au Overview What
Accenture Management Consulting. Open Roles
Accenture Management Consulting Open Roles Who are we? Accenture s Consulting workforce is involved in business consulting, process design work and the application of technologies to business. Management
INNOVATION EMPOWERS. CONSTRUCTABILITY AND CONSTRUCTION PLANNING BY ADOPTING STATE OF THE ART ENGINEERING AND CAD TECHNOLOGY
INNOVATION EMPOWERS. CONSTRUCTABILITY AND CONSTRUCTION PLANNING BY ADOPTING STATE OF THE ART ENGINEERING AND CAD TECHNOLOGY MAURIZIO M. GRANATA BUSINESS DEVELOPMENT EXECUTIVE PROCESS POWER MARINE DIVISION
Pulp & Paper Mills Value and Sustainability
Pulp & Paper Mills Value and Sustainability MAN Ferrostaal AG Our Services for the Pulp and Paper Industry Tailor-made and Turnkey Solutions for the Pulp... MAN Ferrostaal develops and implements projects
Performance Contract for the Water Sector in Oman
Performance Contract for the Water Sector in Oman One Team for One Goal First Four Years of Operations: 2011-2014 Advancing Development With Long-Term Water Management Plan The Sultanate of Oman is experiencing
CORPORATE PRESENTATION
CORPORATE PRESENTATION WHO WE ARE. WHAT WE DO. GER is a specialist engineering staffing, consultancy services and outsourcing business - providing industry focused human capital solutions. Industry Focused
Case Studies. National Identity Management Commission (NIMC), Nigeria eid Consulting for national ID system
Case Studies National Identity Management Commission (NIMC), Nigeria eid Consulting for national ID system Royal Oman Police (ROP) of the Sultanate of Oman eid Consulting for e-passport system Federal
BIM and API Extensions
REVIT BUILDING INFORMATION MODELING BIM and API Extensions This whitepaper explains how the utility of BIM solutions such as Revit Structure software can be broadened through the use of specialized software
Main Automation Contractor (MAC) Targets Long-Term Control System Access
Main Automation Contractor (MAC) Targets Long-Term Control System Access Best practices in engineering, procurement, and construction (EPC) automated system contracting for critical hydrocarbon assets
Spec. Standard: 11/27/06 01310-1 Revision: 11/27/06
SECTION 01310 CONSTRUCTION SCHEDULES PART 1 - GENERAL 1.01 SCOPE: A. Construction Progress Schedule: The CONTRACTOR shall submit a detailed work progress schedule showing all work in a graphic format suitable
PROJECT CONTROL PROCEDURE (PROJECT STANDARDS AND SPECIFICATIONS)
TABLE OF CONTENTS Page 1 of 18 PURPOSE 2 SCOPE 2 DEFINITION 2 ORGANIZATION AND RESPONSIBILITIES 2 Organization and Function 2 Integration of Control Functions 5 7 Introduction 7 Planning and Scheduling
Human Resource & Training Solutions
For Pace & Precision Human Resource & Training Solutions April 2014 www.techmasupport.com GROUP Part of renowned Group, we specialize in Turnkey Staffing, Turnkey HR Services, Executive search, Training
ADG Mühendislik Danışmanlık Tic. Ltd. Şti.
ADG Mühendislik Danışmanlık Tic. Ltd. Şti. Establishing Date : 30 Temmuz 2004 Partners : Ahmet Cem DEMİR Semih LAÇİN Yavuz SOLMAZ Adress : Halkapinar Mah. 1203/11 Sokak No:3 Kat:4/410 Omer Atli Is Merkezi
Road Safety. League of Arab States Truck Accident Causation Feasibility Study
Road Safety League of Arab States Truck Accident Causation Feasibility Study FACILITATING ROAD TRANSPORT FOR MORE GROWTH AND PROSPERITY IN THE ARAB WORLD partners The IDB-AULT-IRU project aims to improve
Integrated engineering and operations to increase efficiency in the oil and gas industry
siemens.com/comos Integrated engineering and operations to increase efficiency in the oil and gas industry COMOS Making data work. Answers for industry. Foundations for growth Oil and gas still are the
JULIUS S. CABALLERO. To be able to share and gain more knowledge and expertise beneficial to both the company and myself.
Curriculum Vitae JULIUS S. CABALLERO Address : Mati,Davao Oriental Philippines Mobile No.: +966-56-2712781 e-mail : juliuscaballero0429@yahoo.com POSITION APPLIED FOR: Civil Engineer CAREER OBJECTIVE To
Process, Power and Marine Division
Process, Power and Marine Division SmartPlant Enterprise for Owner Operators (SPO) Adrian Park, Global Technical Director, Owner Operator Solutions P2C2 Scandinavia, 16th October 2007 The Owner Operator
Best Practices and Approaches to Supply Chain Management
Best Practices and Approaches to Supply Chain Management ATOMEX Forum 2012 Moscow 12.12. 14.12.2012 AF-Consult Switzerland Ltd Jan Kocourek 1 Objectives Provide information available regarding both the
Roles and Responsibilities of Plant Commissioning, Hydrocarbon Introduction and Acceptance Test Run
Page 1 of 8 Introduction Roles and Responsibilities of Plant Commissioning, Hydrocarbon Introduction and Acceptance Test Run There are many parts of a grass root chemical plant construction. They include
Unlocking the value of the Digital Asset for operational decision support
Unlocking the value of the Digital Asset for operational decision support Ian Smith Principal Solutions Consultant www.aveva.com Agenda AVEVA The Digital Asset Capturing a Digital Asset Exploiting a Digital
We are capable of performing EPC services on projects of small and medium size up to $10 million.
Process Plants Corporation PROCESS Cost Schedule Performance We are capable of performing EPC services on projects of small and medium size up to $10 million. Process Plants Corporation PPC is a full service
NORWEGIAN PROJECT MANAGEMENT PRINCIPLES APPLIED IN THE JURONG ROCK CAVERN PROJECT
NORWEGIAN PROJECT MANAGEMENT PRINCIPLES APPLIED IN THE JURONG ROCK CAVERN PROJECT FINN FAGERVIK 1, PETTER PLASSBAK 1 and TEO TIONG YONG 2 1 Sintef-Tritech-Multiconsult (STM) Consortium, Singapore E-mail:ff@multiconsult.no
THE PROVISIONAL CENTRAL PRODUCT CLASSIFICATION
THE PROVISIONAL CENTRAL PRODUCT CLASSIFICATION GROUP 867 ARCHITECTURAL, ENGINEERING AND OTHER TECHNICAL SERVICES Excerpt from CPCprov-en-Publication.doc - United Nation Statistic Division Group Class Subclass
Directory. Maintenance Engineering
2 / 17 INDEX 1.0 INTRODUCTION... 3 2.0 MAINTENANCE POLICY... 4 2.1 MAINTENANCE MISSION... 5 2.2 CRITICAL SUCCESS FACTORS AND KEY RESULT AREAS... 6 2.3 OBJECTIVES... 7 3.0 MAINTENANCE ENGINEERING SERVICES...
ABOUT CMCS. So f t wa r e
ABOUT CMCS CMCS provides fully integrated, 360, sustainable, quality Project Portfolio Management (PPM) solutions helping clients across all industries to identify, prioritize, select and deliver all projects
BIM ACROSS THE DESIGN-BUILD-OPERATE LIFECYCLE
Division BIM ACROSS THE DESIGN-BUILD-OPERATE LIFECYCLE Mark Sawyer General Manager, Division Trimble Navigation Limited, Inc. Lifecycle Strategy PROJECT TEAM s Engineers General Contractor Subcontractors
How To Work At Propak
Build Your Career at Propak Challenge yourself and expand your skills by joining our multi-disciplinary team. Work with us to design and build industry-leading oil and gas processing facilities for installation
Liquefied Natural Gas (LNG)
Graduate Diploma in Petroleum Studies Major in Liquefied Natural Gas (LNG) INDUCTION Launching ceremony Week 39, 2012 Administration / Plant visit / Fundamentals of LNG and LNG main risks awareness Module
Asset Lifecycle Information Management solutions for Oil & Gas industry. Marcin Stecki, Bentley Systems Inc.
Asset Lifecycle Information Management solutions for Oil & Gas industry Marcin Stecki, Bentley Systems Inc. Marcin Stecki Let me introduce myself. 6+ years with Bentley Magritte_The Son Of Man MSc Eng.
APEC CAPABILITIES PROJECT MANAGEMENT / SUPPORT
PROJECT MANAGEMENT / SUPPORT Capital Cost Savings Construction Monitoring and Assistance In-Plant Production Assistance In-Plant Maintenance Assistance Procurement Assistance Project Cost Estimating o
ALWADI aims to proactively identify & capture unique market opportunities which requires professional high quality services & solutions.
MISSION We will proactively study our markets and clients to deliver the right solutions at the right time, at the right cost thus setting new industry standards and business trends. True to our corporate
NAPCS Product List for NAICS 54134: Drafting Services
NAPCS List for NAICS 54134: Drafting Services National 54134 1 Drafting Producing detailed layouts, plans, drawings, illustrations, graphics or models based on engineering or architectural specifications,
COMOS. The software solution for integrated plant management. www.siemens.com/comos
COMOS The software solution for integrated plant management www.siemens.com/comos COMOS From Integrated Engineering to Integrated Operations Increasing global competition requires productivity and quality