The Northwestern Corporation

Transcription

1 Model 60 Holds 8 1/2 Pounds Panned Candy Chute, Chute Plates, Chute Door, Center Rods Mdse Chute Plate (for metal chute) P Mdse. Chute Plate (for plastic chute) Mdse. Chute, Plastic Mdse. Chute, Metal Mdse. Chute Door, Northwestern NET Mdse. Chute Door, Plain A Center Rod w/nut 1.05 Tops, Case, Hopper, Base A Top w/lock Barrel (Chrome) A Top w/lock Barrel (Specify Color) Top w/out Lock Barrel (Specify Color) Case w/trim (Specify Color) Base (Specify Color) Base for Cash - n - Dash Hopper (Specify Color) 9.30 Globes, Gaskets, Top Rings, Globe Rods Model 60 Plastic Globe Globe Gasket A Top Ring w/gasket Globe Rod 0.80 Service Units w/ Plastic Globe (Includes Assembled Globe, Hopper, Wheel and Br. Hsg.) SM Serv. Unit - Shallow Mdse (Metal Wheel & BH) DM Serv. Unit - Deep Mdse RJ Serv. Unit - Rocket/Jumbo C Serv. Unit - 1" Capsule LC Serv. Unit - 1 1/2" Capsule (Metal Wheel & BH) JB Serv. Unit - Jawbreaker(Metal Wheel & BH) 35.00

2 Super 60 A Plastic Globe Vendor Holding lbs. Panned Candy Chute, Chute Plates, Chute Door, Center Rods Mdse Chute Plate (for metal chute) P Mdse. Chute Plate (for plastic chute) Mdse. Chute, Plastic Mdse. Chute, Metal Mdse. Chute Door, Northwestern NET Mdse. Chute Door, Plain A Center Rod & Nut 1.05 Tops, Case, Hopper, Base Case w/trim (Specify Color) Base (Specify Color) Base for Suction Cup Bumpers A Top Assy w/out Lock Barrel (Specify Color) B Top Assy w/lock Barrel (Specify Color) A Top Assy. w/out Lock Barrel (Chrome) B Top Assy. w/lock Barrel (Chrome) Hopper (Specify Color) Hopper Screw 0.09 Globes, Gaskets and Etc A Plastic Globe Globe Gasket 0.85 Service Units (Includes Assembled Globe, Hopper, Wheel & Br. Hsg.) SM Serv. Unit - Shallow Mdse (Metal Wheel & BH) DM Serv. Unit - Deep Mdse RJ Serv. Unit - Rocket/Jumbo JB Serv. Unit - Jawbreaker (Metal Wheel & BH) C Serv. Unit - 1" Capsule LC Serv. Unit - 1 1/2" Capsule (Metal Wheel & BH) 32.15

3 Mega 60 Largest of the 60 Series, 12" Round Plastic Globe Holding lbs Panned Candy Chute, Chute Plates, Chute Door, Center Rods Mdse Chute Plate (for metal chute) P Mdse. Chute Plate (for plastic chute) Mdse. Chute, Plastic Mdse. Chute, Metal Mdse. Chute Door, Northwestern NET Mdse. Chute Door, Plain A Center Rod & Nut (same as Model 80) 1.95 Tops, Case, Hopper, Base Case w/trim (Specify Color) Base (Specify Color) Base for Suction Cup Bumpers Hopper (Specify Color) Hopper Screw A Top w/out Lock Barrel (Specify Color) A Top w/out Lock Barrel (Chrome) B Top w/lock Barrel (Specify Color) B Top w/lock Barrel (Chrome) Globes, Gaskets, Baffles, Etc Globe Globe Gasket (Plastic) FHA Fat Head Br. Hsg. Assy w/2 Springs Washer Pawl Screws & Globe to Hopper Extra Spring for Br. Hsg Baffle Assy Baffle Disc 2.35 Service Units C Serv. Unit - 1" Capsule DM Serv. Unit - Deep Mdse RJ Serv. Unit - Rocket/Jumbo 55.00

4 Big Case A Plastic Globe Vendor Holding lbs Panned Candy Chute, Chute Plates, Chute Door, Center Rods Mdse Chute Plate (for metal chute) P Mdse. Chute Plate (for plastic chute) Mdse. Chute, Plastic Mdse. Chute, Metal Mdse. Chute Door, Northwestern NET Mdse. Chute Door, Plain A Center Rod & Nut 2.50 Tops, Case, Hopper, Base Case w/trim (Specify Color) Base (Specify Color) Base for Suction Cup Bumpers Hopper (Specify Color) A Top w/out Lock Barrel (Specify Color) A Top w/out Lock Barrel (Chrome) B Top w/lock Barrel (Specify Color) Adaptor (Specify Color) Globes, Gaskets, Baffles, Etc Globe (Specify Decal ) NET Baffle Assy Carriage Bolt Hex Nut 0.09 Service Units (Includes assembled globe, top, center rod, baffle, hopper, wheel & br. Hsg.) C Serv. Unit - 1" Capsule DM Serv. Unit - Deep Mdse SM Serv. Unit - Shallow Mdse JB Serv. Unit - Jawbreaker LC Serv. Unit - Large Caps RJ Serv. Unit - Rocket/Jumbo 49.30

5 Decorative Fronts A Mylar Decorative Front (Gold - Set) A Mylar Decorative Front (Silver - Set) 1.95 Locks and Keys Lock & Key (Specify Key #) 3.95 Key Only NET 2.50 Camlock & Key (Specify Key G#) 5.00 Camlock Key Only NET Lock Barrel w/nut & Washer 2.75 Lock Barrel Nut Only Ace and Key (Specify Key#1,2,3,4,5,10,11,12,13) 7.50 Ace Lock Key Only NET Protective Washer (for Ace Lock) 1.60 Options Merchandise Tray (Specify Color) Screw for Mdse. Tray Rubber Bumper (Set/4) 0.95 Decals c Decal c Decal Quarter Back-To-Back $1.00 Decal 0.90

6 Most Popular Wheels & Brush Housings For 850ct, 1430ct, ct Gum or 27mm High Bounce Balls For Super 60 Series ASSY RJ Wheel Assy. w/insert H RJ-JB Brush Hsg. Assy w/heavy Springs (Plastic) 4.15 For Mega ASSY RJ Wheel Assy. w/insert H RJ Brush Hsg. Assy w/ Springs for Mega 60 (Plastic) 4.15 For Panned Candy & Nuts: M&M's, Chiclet Gum, Sweet Tarts, Etc A Deep Mdse. Wheel w/adjuster Deep Brush Hsg. Assy (Plastic) 6.35 For Panned Candy: Small Portions Only A Shallow Mdse. Wheel w/adjuster Shallow Brush Hsg. Assy (Metal) 8.20 Four 1" Capsule Wheel Options (See Below) P-A New Plastic Capsule Wheel Assy P-A New Capsule Brush Housing Assy (Plastic) A Metal Capsule Wheel Assy L Capsule Brush Hsg. Assy with Light Springs (Plastic) JA Metal JB Wheel Assy (P Spring) H Capsule Brush Housing Assy w/heavy Springs (Plastic) A 1, 1.1, 1.2" Capsule Wheel Assy (Metal) (3 Long Springs) A 1, 1.1, 1.2" Cap. Brush Hsg. Assy (Plastic) 4.15 For Vending 350ct, 475ct, 600 ct Titan Gum A Capsule Wheel Assy (Metal) H Capsule Brush Housing Assy w/heavy Springs (Plastic) 4.15 ** See Below if Metal or JA Jawbreaker Wheel Assy (Metal) H Capsule Brush Housing Assy w/heavy Springs (Plastic) 4.15 ** See Below if Metal For Ping Pong Balls A Large Capsule Wheel Assy (Metal) Large Capsule Br. Hsg. Assy (Metal) 6.95 (Requires cut down cam/spacer washer on mech) For 1.3 Capsules A 1.3" Capsule Wheel Assy (Metal) A 1.3" Capsule Brush Hsg. Assy (Metal) 6.80 (Requires cut down cam/spacer washer on mech)

7 Additional Wheel & Brush Housing Parts A R&J Insert Only Shallow Mdse. Wheel Only Shallow Portion Adj Deep Mdse. Wheel Only Deep Portion Adjuster Shallow Brush Hsg. Only Deep Brush Housing Only P Caps./ RJ Br. Hsg. Only (Plastic) Caps./ RJ Br. Hsg. Only (Metal) /2" Cap. Brush Hsg. Only (Metal) Solid Brush Guard, Plastic Agitator Assy. For JB Holder for JB Agitator 1.00 Springs Capsule Agitator Spring RJ & Lg. Cap. Agit. Spring Agitator Loop Spring 1.00 Brush Holders and Brush Springs Brush Holder L Brush Holder Assy Enter S Brush Holder Assy Exit Brush Spring, Short Brush Spring, Long Brush Spring, Light Brush Spring, Heavy Bleep Blip Brush Housing Spring Short Bleep Blip Brush Housing Spring Long 0.65 Fasteners Screw Used w/ & Screw Used w/ H & L Shallow Br. Hsg. Screw Cap. Or JB Brush Screw Cap. Or JB Agitator Screw Cap. Or JB Brush Housing Screw 0.09

8 3-612 Coin Mechansim Standard Coin Mechanism for Model 60 Series Coin Mechanism Assy (1c,5c,10c,25c) DT Coin Mechaniam Assy (25c Drop-Thru) Coin Mechanism Assy (2 Quarters Back to Back) (For Foreign Currency Coin Mechanisms Send Sample Coin. Extra Milling Charge Will Be Quoted.) Coin Mechanism Parts Face Plate (Plain) Cam LC Cam - Cut Down Sprocket Coin Pawl Coin Pawl Spring 0.25 Coin Wheels c Coin Wheel c Coin Wheel c Coin Wheel D 25c Drop-Thru Coin Wheel 2.35 Two Coin Parts Two Coin Face Plate F Two Coin Face Plate Filler c Back-Back Coin Wheel Top Coin Pawl Bottom Coin Pawl Back to Back Coin Pawl Spring, 2 Coins Back to Back 0.30 Knob and Shaft Knob & Shaft Knob Shaft Washer (same as ) 0.13 Mechanism Latch New Latch Latch Latch Screw 0.20

9 3-612 Coin Mechansim Standard Coin Mechanism for Model 60 Series Back Plate Assembly C-10C Back Plate Assy (1c, 5c, 10c) C-50C Back Plate Assy (25c, 50c) cDT Back Plate Assy (25c DT) A Back Plate w/ret. Pawl 3.35 Rivets, Pawls, Pins, Springs, Kickouts Washer Pawl, 25c Washer Pawl, 1c, 5c, 10c Washer Pawl Spring Washer Pawl Spring Ret Return Pawl Return Pawl Spring Rivet for Return Pawl STP New Full Stroke Pin Full Stroke Pin Spring Coin Kickout 1c, 5c, 10c Coin Kickout 25c, 50c Anti-Piling Spring Full Stroke Pawl Full Stroke Spring Mechanism Fasteners Screw for Back Plate to Face Plate Rivet for Return Pawl to Back Plate Screw for Full Stroke Pin Spring to Back Plate Screw for Coin Kickout to Back Plate Screw for Sprocket to Knob Shaft Screw for Washer Pawl Retainer to Back Plate Screw for Return Pawl Spring to Back Plate Screw for Latch to Face Plate 0.20

10 Model 80-19" Tall Unit Holding Approximately 118 2" Capsules Upper Unit Upper Corner Post Upper Panel (Specify Color) Excap (Specify Color) Plastic Display Panel A Center Rod & Nut 1.95 Rings, Hopper, Holders and Tops Top & Middle Ring Hopper Wheel Hold Down Bracket Hopper Adapter Display Holder A Top w/out Lock Barrel (Specify Color) A Top w/out Lock Barrel (Chrome) Step Top w/out Lock Barrel (Specify Color) Step Top w/out Lock Barrel (Chrome) B Top w/lock Barrel (Specify Color) B Top w/lock Barrel (Chrome) Step Top w/lock Barrel (Specify Color) Step Top w/lock Barrel (Chrome) (** Top Reinforcement - Add $1.00) Base, Rings, Fronts and Cash Box Base (Specify Color) Base Corner Post Top & Middle Ring Base Panel (Specify Color) Cash Box Base Tie Rod ** Front - Silver Front Hinge A ** Front Assy -Silver A ** Locking Front Assy - Non-Crack Back A ** Locking Front Assy - Tri-Rise, Etc A ** Locking Front Assy - Regular (** Front Assy - other than Silver - Add $1.00) Chute, Chute Plates, Chute Door Merchandise Chute Chute Cover Chute Door, Northwestern Chute Door Bracket Chute Door Spring Chute Door Brkt. Screw 0.06

11 Super 80-25" Tall Unit Holding Approximately 157 2" Capsules Upper Unit Upper Corner Post Upper Panel (Specify Color) Excap (Specify Color) J Jumbo Excap (Specify Color) Plastic Panel A Center Rod & Nut 2.05 Rings, Hopper, Holders and Tops Top & Middle Ring Hopper Wheel Hold Down Bracket Hopper Adapter Display Holder A Top w/out Lock Barrel (Specify Color) A Top w/out Lock Barrel (Chrome) Step Top w/out Lock Barrel (Specify Color) Step Top w/out Lock Barrel (Chrome) B Top w/lock Barrel (Specify Color) B Top w/lock Barrel (Chrome) Step Top w/lock Barrel (Specify Color) Step Top w/lock Barrel (Chrome) (**Top Reinforcement - Add $1.00) Base, Rings, Fronts and Cash Box Base (Specify Color) Base Corner Post Top & Middle Ring Base Panel (Specify Color) Cash Box Base Tie Rod ** Front - Silver Front Hinge A ** Front Assy - Silver A ** Locking Front Assy - Non-Crack Back A ** Locking Front Assy - Tri-Rise, Etc A ** Locking Front Assy - Regular (** Front Assy - other than Silver - Add $1.00) Chute, Chute Plates, Chute Door Merchandise Chute Chute Cover Chute Door, Northwestern Chute Door Bracket Chute Door Spring Chute Door Brkt. Screw 0.05

12 Super 80-30" a 30" Tall Unit Holding Approximately 236 2" Capsules Upper Unit Corner Post 21" Plastic Panel Upper Panel (Specify Color) A Center Rod & Nut A Excap (Specify Color) Rings, Hopper, Holders and Tops Top & Middle Ring Hopper Wheel Hold Down Bracket Hopper Adapter Display Holder A Top w/out Lock Barrel (Specify Color) A Top w/out Lock Barrel (Chrome) Step Top w/out Lock Barrel (Specify Color) Step Top w/out Lock Barrel (Chrome) B Top w/lock Barrel (Specify Color) B Top w/lock Barrel (Chrome) Step Top w/lock Barrel (Specify Color) Step Top w/lock Barrel (Chrome) (**Top Reinforcement - Add $1.00) Base, Rings, Fronts and Cash Box Base (Specify Color) Base Corner Post Top & Middle Ring Base Panel (Specify Color) Cash Box Base Tie Rod ** Front - Silver Front Hinge A ** Front Assy - Silver A ** Locking Front Assy - Non-Crack Back A ** Locking Front Assy - Tri-Rise, Etc A ** Locking Front Assy - Regular (**Front Assy - other than Silver - Add $1.00) Chute, Chute Plates, Chute Door Merchandise Chute Chute Cover Chute Door, Northwestern Chute Door Bracket Chute Door Spring Chute Door Brkt. Screw 0.05

13 Model 80 & 83 Series Locks, Baffles and Optional Parts A 4" Baffle Assy. (For Use with 1" & 2" Cap) A 7" Baffle Assy Lock & Key (Specify Key #) 3.95 Key Only 2.50 Net Camlock & Key (Specify Key G#) 5.00 Camlock Key Only 2.50 Net Lock Barrel w/nut & Washer 2.75 Lock Barrel Nut Only Ace Lock & Key (Top) (Specify Key #) 7.50 Ace Key Only 2.50 Net Ace Cam Lock & Key(Front) (Specify Key #) 7.50 Ace Cam Lock Key 2.50 Net Protective Washer 1.60 Decals For 80 Series c Decal c Decal c Decal c Decal $1.00 Decal 1.50

14 Model A Model 83 Case Assy Model 83 Display Panel (Drilled) A Display Panel Assy w/bracket 7.85 Rings, Hopper, Holders and Tops Top & Middle Ring Hopper Wheel Hold Down Bracket Hopper Adapter Display Holder A Top w/out Lock Barrel (Specify Color) A Top w/out Lock Barrel (Chrome) B Top w/lock Barrel (Specify Color) B Top w/lock Barrel (Chrome) Base, Rings, Fronts and Cash Box Base (Specify Color) Base Corner Post Top & Middle Ring Base Panel (Specify Color) Cash Box Base Tie Rod A ** Front Assy - Silver ** Front - Silver Front Panel Bracket Front Hinge 0.65 (** Front Assy other than Silver - Add $1.00) Chute, Chute Plates, Chute Door S83-M83 Mdse Chute Chute Cover Chute Door, Northwestern Chute Door Bracket Chute Door Spring Chute Door Brkt. Screw 0.05

15 Super A Super 83 Case Assy Super 83 Display Panel (Drilled) A Display Panel Assy w/bracket 9.95 Rings, Hopper, Holders and Tops Top & Middle Ring Hopper Wheel Hold Down Bracket Hopper Adapter Display Holder A Top w/out Lock Barrel (Specify Color) A Top w/out Lock Barrel (Chrome) B Top w/lock Barrel (Specify Color) B Top w/lock Barrel (Chrome) Base, Rings, Fronts and Cash Box Base (Specify Color) Base Corner Post Top & Middle Ring Base Panel (Specify Color) Cash Box Base Tie Rod A ** Front Assy - Silver ** Front - Silver Front Panel Bracket Front Hinge 0.50 (**Front Assy - other than Silver - Add $1.00) Chute, Chute Plates, Chute Door S83-M83 Mdse Chute Chute Cover Chute Door, Northwestern Chute Door Bracket Chute Door Spring Chute Door Brkt. Screw 0.05

16 Model 80 & 83 Series Hopper Ring Assembly (Includes Hopper, Wheel, Brush Housing, Spring with Adapter Ring) " Cap. Hopper Ring Assy (Old Style) Net A Type 2 Soft Touch Hopper Ring Assy Net A Type 3 Mega Gum Hopper Ring Assy Net C 1.3" Cap. Hopper Ring Assy Net C 1" Cap. Hopper Ring Assy Net LG Large Gum Hopper Ring Assy Net SG Small Gum Hopper Ring Assy Net PM Panned Mdse Hopper Ring Assy Net TG Titan Gum Hopper Ring Assy Net G Golf Ball Hopper Ring Assy Net Hopper Assembly (Includes Hopper, Wheel, Br. Hsg., Spring) " Cap. Hopper Assy (Old Style) Net A Type 2 Soft Touch Hopper Assy Net A Type 3 Mega Gum Hopper Assy Net C 1.3" Cap. Hopper Assy Net C 1" Cap. Hopper Assy Net LG Large Gum Hopper Assy Net SG Small Gum Hopper Assy Net PM Panned Mdse Hopper Assy Net TG Titan Gum Hopper Assy Net G Golf Ball Hopper Assy Net

17 Model 80 & 83 Series Wheels and Brush Housings " Cap. Wheel Assy A Type 2 Mega Brush Hsg. Assy (for 2" Capsules/Mega Gum/45/49 mm HBB) 9.30 or " Capsule Wheel Assy " Capsule Brush Hsg. Complete (Old Style) " Capsule Wheel Assy " Capsule or 38 mm Ping Pong A 1.3" Capsule or 38 mm Ping Pong Brush Hsg. Complete C Mdse. Wheel Assy., 1" Cap. Adjustable Wheel Mdse. Wheel Br. Hsg. Assy (Old Style for 1-1.2" Capsules) CAP New 1.1" Cap. Wheel Assy (6 round holes) A New 1.1" Cap Br. Hsg Assy PM Mdse. Wheel Assy., Panned Mdse. Wheel Br. Hsg. Assy TG Mdse. Wheel Assy., Titan (600ct) (Adjustable Wheel) Mdse. Wheel Br. Hsg. Assy S Small Gum Wheel Assy (1 Pc Count Gum) Small Gum Brush Hsg L Large Gum Wheel Assy (850 Count Gum) A Large Gum Brush Hsg 7.75 Additional Wheel and Brush Housing Parts " Cap. Wheel Only " Cap. Agitator Spring " Cap. Brush Hsg. Spring Spring Spring A Metal Portion Adjuster Agitator Spring Mdse. Wheel Spider (filler) Brush Housing Hold Down Retainer Mdse. Wheel Brush Spring Gum Wheel Adap., large (pr) Gum Wheel Adap Small Gum Brush Hsg Large Gum Brush Hsg. Adap. 3.10

18 Model 80 & 83 Series Screws for Front Assembly and Hopper Chute Screw Chute Door Bracket Screw Screw for Wheel Hold Down Brkt to Hopper A Screw for Hopper Assy. To Corner Post Screw for 2 Hinges to Front Screw for Hopper to Hopper Ring 0.10 Screws for Wheels and Brush Housings Screw for Springs to 2" Cap. Wheel Screw for Mdse. Wheel Ret. & Spring to Mdse. Wheel A Screw for Lg. or Sm. Gum inserts to Gum Wheel Screw for Br. Holder to any Br. Holder 0.09 M-97 Nut for above

19 Coin Mechanism For Model 80 and Super 80 Series Coin Mechanism Assy (1c, 5c, 10c, 25c, 50c) Coin Mechanism Assy (75c, $1.00) Coin Mechanism Parts Face Plate Single Coin Adaptor Double Coin Adaptor Single Coin Pawl (25c) Double Coin Pawl (50c) Coin Pawl Spring Full Stroke Pawl Full Stroke Pawl Spring Knob & Shaft Sprocket Return Cam Return Pawl Spring Mechanism Lock Latch Coin Pawl (1c, 5c, 10c) Bottom Coin Pawl Top Coin Pawl Coin Pawl Spring Coin Wheels c Coin Wheel c Coin Wheel c Coin Wheel c Coin Wheel c Coin Wheel $1.00 Coin Wheel NET c Coin Wheel NET 6.50 (For Foreign Currency Coin Wheels Send Sample Coin. Extra Milling Charge Will Be Quoted.)

20 Back Plate and Parts A Back Plate Assy. w/return Pawl & Washer Pawl Back Plate Return Pawl Return Pawl Rivet Washer Pawl (same as ) Washer Pawl Spring (same as ) Washer Pawl Spring Retainer (same as ) Coin Mechanism Fasteners Screw for Back Plate to Face Plate Spacer Washer Return Pawl Rivet Thumb Screw Full Stroke Pin Screw Hopper Screw (for Sprocket to Knob Shaft) Hopper Screw (for Washer Pawl Ret. To Back Plate) 0.09

21 Super 80 Sticker Machine Sticker Machine Floor, Columns, Weights, Etc B Floor Assy With Columns Wiper Spring A Wiper Spring Assy Wiper Retainer #6-32 x 3/8" sltd rh ms LA Left Column Assy RA Right Column Assy Pull Slide Cover A Pull Slide Assembly Column Weight A Weight Assembly Column Weight Rivet 0.20 Sticker Machine Cash Door, Cash Box, Locks, Etc Cash Door A Cash Door Spot Weld Assy w/out Lock B Cash Door Spot Weld Assy with Lock Lock Rod Retainer Locking Rod Locking Cam S80 Sticker Cash Box Sticker Machine Panels Base Panel (same as ) Super 80 Sticker metal upper front Display Panel Retainer A Panel Retainer Super 80 Sticker clear plastic 7.85 Super 80-30" Sticker Machine Options S80-30" Sticker Front Plastic Upper Front Panel 30" 9.95

22 Super 80 Sticker Machine Sticker Machine Mechanism V5 Super 80 Sticker Machine Dual Mechansim (V5) (Pair) G4 Super 80 Sticker Machine Dual Mechansim (G4) (Pair) GW-G4 G-4 50c Greenwald Coin Mechanism GW-V5 V5 50c Greenwald Coin Mechanism GW-V5 1KR V5 1Krona Greenwald Coin Mechanism Call GW-V5 1LO V5 1 Can Loonie Greenwald Coin Mechanism GW-V7 5P V7 5Dom Peso Greenwald Coin Mechanism Call Sticker Machine Mechanism Parts Slide Coin Mech Housing Mech Housing Guide Slide Actuator Screws for Mech Housing Guide (Holds Slide Actuator) Mech Housing Retaining Pin Screw to Hold Mech Housing Guide Mechanism Receiver 4.20 GW Greenwald Mech Return Spring 1.20 GW Greenwald V5 Blockout Key (Doz) GW Greenwald G4 Blockout Key (Doz) Sticker Machine Decals GW Greenwald Casting Decal G4 50c (Doz) GW Casting Decal G4 75c (Doz) GW Greenwald Slide Decal G4 50c (Doz) GW Slide Decal G4 75c (Doz) 14.20

23 Triple Play Chute, Chute Plates, Chute Door, Center Rod T-107 Mdse. Chute 3.20 T-108 Mdse. Chute Cover Mdse. Chute Door, N.W T-111-A Center Rod & Nut 2.05 Top, Case, Hopper, Base T-100 Case (Specify Color) T-100-A Case w/door (Specify Color) T-200 Hopper T Hopper Screw 0.16 T-201 Display Window T-202 Upper Back Panel (Specify Color) 3.95 T-202P Upper Back Panel Plastic 1.05 T-203 Center Panel (Metal) 3.95 T-203-P Center Panel Plastic 2.60 T-204 Excap (Specify Color) T-400-A Top w/out Lock Barrel (Specify Color) T-400-B Top Assy w/lock Barrel (Specify Color) T-600 Sub Base (Specify Color) T-601 Mdse. Tray (Specify Color) T Mdse. Tray Screw 0.16 T-800 Cash Box Locks, Keys, Door and Other Optional Parts Lock & Key (Specify Key #) 3.95 Key Only NET 2.50 Camlock & Key (Specify Key G#) 5.00 Camlock Key Only NET Lock Barrel w/nut & Washer Ace Lock & Key (Specify Key#) 7.50 Ace Key Only NET Protective Washer 1.60 T-103 Lower Door Lock Bracket 1.05 (used w/t-110 Door Lock) T-110 Door Lock 1.80 RH1605 Door Knob w/screw 1.35 T-112 Door ( Specify Color) T-112-B Door Assy. (Specify Color) Ace Back Door Lock 7.50 T-112-ACE Door Assy. w/ace Lock T-112-C Cam for Ace Lock 1.05 T-113-A Door Hinge Pin Assy 3.95 T-115-A Door Lock Rod Assy. w/knob 3.55

24 Triple Play Wheels and Brush Housings For ct Gum or High Bounce Balls ASSY RJ Wheel Assy. w/insert 5.75 T-330-H RJ-JB Br. Hsg. Assy. w/heavy Springs (Metal) A Deep Mdse. Wheel w/adj T-320 Deep Brush Hsg. Assy 6.35 For Panned Candy: Small Portions Only A Shallow Mdse. Wheel w/adj T-310 Shallow Br. Hsg. Assy 8.20 Four 1" Capsule Wheel Options (See Below) P-A New Plastic Capsule Wheel Assy 6.50 T-330-1P-A New Capsule Brush Housing Assy (Metal) A Metal Capsule Wheel Assy 7.95 T-330-L Capsule Brush Hsg. Assy with Light Springs (Metal) JA Metal JB Wheel Assy (P Spring) 7.85 T-330-H Capsule Brush Hsg. Assy w/ Heavy Springs (Metal) A 1,1.1,1.2" Capsule Wheel Assy (Metal) (3 Long Springs) 7.85 T A 1,1.1,1.2" Cap. Brush Hsg. Assy (Metal) 5.65 ** Ping Pong Option Not Available for Triple Play

25 Stand Parts TM-700 Cast Iron Base (Black) TM Stand Bracket 2.60 TM-701-A Column Assy T-602 Triple Play Hardware SET 1.00 T Screw (4 required) 0.15 T Nut (4 required) 0.15

26 T-612 Coin Mechanism.Standard for Triple Play T-612 Coin Mechanism Assy (1c, 5c, 10c, 25c) T-612DT Coin Mechanism Assy (25c Drop Thru) T-632 Coin Mechanism Assy (2 Quarters Back to Back) (For Foreign Currency Coin Mechanisms Send Sample Coin. Extra Milling Charge Will Be Quoted.) T-612 Coin Mechanism Parts Face Plate (Plain) Cam Coin Pawl Coin Pawl Spring Sprocket 1.35 T-612 Coin Wheels c Coin Wheel c Coin Wheel c Coin Wheel D 25c Drop Thru Coin Wheel 2.35 Two Coin Parts Two Coin Face Plt F Two Coin Face Plt. Filler c Back-to-Back Coin Wheel Top Coin Pawl Bottom Coin Pawl Back-to-Back Coin Pawl Spring, 2 Coins Back-to-Back 0.30 Knob and Shaft Knob & Shaft Knob Shaft Washer 0.13 Mechanism Latch T-109 Mechanism Lock Latch 0.95 T Mechanism Latch Lock Spring 0.25

27 T-612 Coin Mechanism.Standard for Triple Play Back Plate Assembly C-10C Back Plate Assy (1c, 5c, 10c) C-50C Back Plate Assy (25c, 50c) cDT Back Plate Assy (25cDT) A Back Plate w/return Pawl 3.35 T-612 Mechanism Backplate Parts Washer Pawl, 25c Washer Pawl, 1c, 5c, 10c Washer Pawl Spring Washer Pawl Spring Ret Return Pawl Return Pawl Spring Rivet for Return Pawl STP New Full Stroke Pin Full Stroke Pin Spring Coin Kickout 1c, 5c, 10c Coin Kickout 25c, 50c Anti-Piling Spring 1.20 (not available on drop-thru mechs) T-612 Mechanism Fasteners Screw for Back Plate to Face Plate Screw for Full Stroke Pin Spring to Back Plate Screw for Coin Kickout to Back Plate Screw for Sprocket to Knob Shaft Screw for Washer Pawl Retainer to Back Plate Screw for Return Pawl Spring to Back Plate 0.15 (same as )

28 Pedestal Stand M-104-A Flange 5.70 M-113 Pipe M-201 Cast Iron Base M-800 Steel Stamped Base Tempo Stand M-250-1AU Upper Leg Assy M-250-1AL Lower Leg Assy M Black Plastic Caps 0.35 Hardware Tempo Hardware (Set) 6.00 Nuts and Screws M-98 1/4 x 20 Hex Nut 0.20 M-92 1/4-20 x 1" Hex Hd. Screw 0.25 M x 1 1/2" Round Hd Screw (Shelf Brace) 0.30 M-106 1/4-20 x 1/2" Hex Hd. Screw 0.20 M-112 Set Screw 3/8 x 16 x 1/4 for NuVo 0.80

29 Showcase 70" (Leg Supports, Caps, Casters are same as Showcase) M-910 Machine Fastening Bracket 2.60 M-911 Tube Holding Bracket " Showcase 70 Stand M-921-A Back Brace, per pair 8.65 M-907 Shelf Tubing (Top or Bottom) (Each Tube) 7.30 Hardware 16" Hardware " Showcase 70 Stand M-922-A Back Brace, per pair 9.65 M-906 Shelf Tubing (Top or Bottom) (Each Tube) 8.00 Hardware 24" Hardware " Showcase 70 Stand M-314-A Back Brace, per pair M-905 Shelf Tubing (Top or Bottom) (Each Tube) 8.65 Hardware 30" Hardware 3.95 Showcase Stand (4, 6, 8) M-307 Top Shelf - 4 Machines 9.00 M-308 Bottom Shelf - 4 Machines 9.00 M-301 Top Shelf - 6 Machines M-302 Bottom Shelf - 6 Machines M-310 Brace - 4 Machines (Pair) 8.65 M-310-A Back Brace - pair w/screw & nut - 4 Machine 9.00 M-306 Brace - 6 Machines (Pair) 9.65 M-306-A Back Brace - pair w/screw & nut - 6 Machine M-330 Leg Hardware 4 Showcase 4 Hardware 3.30 Hardware 6 Showcase 6 Hardware 3.70 Caps and Casters M Black Plastic Caps 0.35 M-320-3A Push-Up Casters w/inserts (4 per set) 8.75 M Caster Insert Only 0.40

30 Square Deal Stand M-270-1A Leg/End Support M Stand Cap 0.35 M Insert for Casters 1.15 HDWE SQ DEAL Hardware 6.60 M-912 Machine Fastening Bracket 2.60 Back Braces M Square Deal 4 Back Brace (Pair) M Square Deal 5 Back Brace (Pair) M Square Deal 7 Back Brace (Pair) M-922 Square Deal 9 Back Brace (4) Shelf Assy M-270-6A Square Deal 4 Shelf Assembly M-270-7A Square Deal 5 Shelf Assembly M-270-8A Square Deal 7 Shelf Assembly M-270-9A Square Deal 9 Shelf Assembly 20.65

31 J Stand...Silver Sentinel and Hi-Five J-100-1A J Stand Leg Assy Hi Five J-103-1A J Stand Leg Assy Hi Five Short J-102-1A J Stand Leg Assy Silver Sentinel J-104-1A J Stand Leg Assy Silver Sentinel Short M-2106 Top and Bottom Shelf for Silver Sentinel 6 (each) M-2106-A Top and Bottom Shelf for Silver Sentinel 6 (pair) M-2108 Top and Bottom Shelf for Silver Sentinel 8 (each) M-2108-A Top and Bottom Shelf for Silver Sentinel 8 (pair) NuVo Stand M Base Foot (per foot) 7.00 Casters and End Caps M A Caster for Silver Sentinel and Square Deal (4) M Chrome End Closures for Silver Sentinel 0.40 M Cross Bar End Caps for J Stand 0.40 M Threaded Enclosure for Side Mounts 1.15 M New Threaded Enclosure for Side Mounts 1.60 Pro Stand Parts " Chrome Base w/ 2 rims (4) Chrome Trim 69.5" Pipe A Pipe and Flange Assembly A Pro Stand Pipe Assembly w/welded top 36.65