How To Get A Better Battery Life On A Jedec Mae276 (Sata) 2.2Gb/Sata 3.2B/S (Salt) (Ios) (Summer) (Microtower)

Transcription

1 Product Catalogue 2015 Innodisk Embedded Solutions Flash Storage, DRAM Module and Embedded Peripheral Product specifications are subject to change without prior notice. 1

2

3 Innodisk is a service driven provider of flash memory and DRAM products for the industrial and enterprise applications. With satisfied customers across the embedded, aerospace and defense, cloud storage markets and more, we have set ourselves apart with a commitment to dependable products and unparalleled service. This has resulted in products including embedded peripherals designed to supplement existing industrial solutions and high IOPS flash arrays for industrial and enterprise applications. The expanded business lines are leading our next step in being a comprehensive solution and service provider in industrial storage industry. Absolute Service Service is not just what we do. It s who we are. Absolute Service is our pledge and our guide. It infuses everything we do at Innodisk. Absolute Service is our promise to deliver the most comprehensive service in every situation. It s the philosophy that guides us in all interactions with our customers and business partners. It s the spirit of friendliness and enthusiasm that fills each member of the Innodisk team. Absolute Service is our absolute commitment to our customers..

4 The Most Advanced SSD Innodisk 3ME3 Series Achieves High IOPS with DRAM-less Design Innodisk s new embedded storage series 3ME3, is the perfectly upgrade from the industrial 3ME series. The 3ME3 offers an outstanding 25,000 IOPS 4K random read and write all without an external DRAM buffer. The DRAMless design not only prevents data loss from sudden power failure, but also makes for an even more compact form factor SSD, saving you precious space in your embedded system. The 3ME3 series is designed with an innovative flash algorithm and uses the latest synchronous NAND Flash IC to enhance disk performance in both sequential and random data transfers. Features DRAM-less, 100% data integrity even in the event of power failure High random IOPS to enhance boot up times and general IO performance Enhanced performance with innovative firmware algorithm Supports TRIM, NCQ, and SMART Supports data integrity in the event of abnormal power failure with idata Guard technology Wide operating temperature range from -40 C to 85 C The 3ME3 offers more advantages to you What s the breakthrough technology of Innodisk s 3ME3? DRAM-less design for more reliable storage While using DRAM as a data buffer has become a common SSD architecture designed to enhance random transfer performance, Innodisk has approached the problem of achieving high performance in a reliable way from a different angle. Temporary data stored in the DRAM buffer is lost when power cuts unexpectedly, so data integrity is a critical issue for SSDs using a DRAM buffer. The New Innodisk 3ME3 embedded SATA modules are designed from the ground up for industrial use with the DRAM-less concept, brand-new firmware, and idata Guard to ensure data integrity. 4

5 DDR4 Server DRAM Brings More Power to Server Infrastructures Benefits 16GB DDR W/REG DIMM M4R0-AGSQGCRG S2A MXXXXXXXXXXX0001 XXXX Lower power consumption DDR4 technology improves upon DDR3 with at least 20% lower voltage, which is more suitable for handheld devices. Greater Performance DDR4 technology improves performance up to 30% (comparing the mainstream DRAM of DDR SODIMM with DDR SODIMM). DDR4 Series Series Server solution Module Type DDR4 Long DIMM Frequency 2133MHz /2400MHz Capacity 8GB/16GB/32GB Function Registered DIMM Pin Number 288pin Voltage 1.2V Thermal Sensors Innodisk DDR4 UDIMM/SODIMM/ ECC have built-in thermal sensors to prevent failures due to overheating, which is especially practicable for the fanless system. Gold Finger 30µ" Innodisk DDR4 UDIMM/SODIMM/ ECC with our exclusive Gold Finger technology surpasses the JEDEC s standard 3u specification and delivers a 30µ" pin-width to DRAM modules for extra protection against scratches and environmental damage. Product specifications are subject to change without prior notice. 5

6 A Commitment to Technical Innovation Innodisk continues to bring the most innovative products to a range of industries by developing outstanding proprietary technologies. Here are just few examples of Innodisk s breakthroughs and innovations. Pin 7 icell Pin 7 is a Serial ATA device-to-host connection technology. It eliminates the need for power cables, making SSDs more shock-resistant and better suited for extreme environments. Pin 7 is the choice for system integrators who require flexibility, reliability, and space-maximization in the design of their systems. Pin 7 technology is used in Innodisk s SATADOM series, which is featured in Intel s Romley server boards and is currently the smallest flash storage device available. ismart icell is a smart data protection technology that is built into Innodisk s SSDs. icell is crucial for mission-critical applications, where working under extreme conditions and without backup power is unavoidable. Our icell technology provides a mechanism to instantaneously discharge data stored in temporary volatile DRAM buffers to flash storage, to ensure the safety of data during power failures. ismart is a powerful, easy-to-use SSD and HDD health monitoring tool. It allows system integrators to track important disk information, such as temperature, storage space, bad blocks, lifespan, and firmware, all under one platform. With ismart, system integrators can better manage disk usage and know exactly when to replace a disk, before the end of its life cycle. 6

7 idata Guard Thermal Sensor Innodisk s idata Guard is a comprehensive data protection mechanism that functions before and after a sudden power outage to the SSD. Low-power detection terminates data writing before an abnormal poweroff, while table-remapping after power-on deletes corrupt data and maintains data integrity. Innodisk s idata Guard provides effective power cycling management, preventing data stored in flash from degrading with use. Garbage Collection/ TRIM Innodisk s Thermal Sensor is a robust heat and workload management technology that is built into our DRAM modules and flash storage. It is a crucial solution for industrial & aerospace and defense applications, which are often susceptible to extreme heat and performance stress. Innodisk s Thermal Sensors help to lower the working temperature while distributing workloads, which prevents modules from overworking and overheating, and greatly enhances system performance and system stability. Innodisk s Garbage Collection/TRIM technology is used to maintain data consistency and perform continual data cleansing on SSDs. It runs as a background process, freeing up valuable controller resources while sorting good data into available blocks, and deleting bad blocks. It also significantly reduces write operations to the drive, thereby increasing the SSD s speed and lifespan. With Innodisk Garbage Collection/TRIM technology, an SSD s health and performance is optimized. Product specifications are subject to change without prior notice. 7

8 Our Focus Innodisk focuses on providing reliable memory products and technologies for mission-critical applications. We understand the importance of quality in industrial embedded flash and DRAM storage products. So, we manufacture all of our products in our own purpose-built memory production facility. And to meet development team delivers fast turnaround and knowledgable support whenever Industrial/Embedded Our products can be found in a wide range of industrial/embedded applications, from automation, telecommunications, and medical equipment to transportation. We Industrial/Embedded suit various working conditions and temperatures. Cloud Computing Cloud Computing Our comprehensive server-grade storage products are designed to of cloud computing and highperformance computing server applications. Our products can be such as higher speed, higher density, or lower power consumption. Aerospace and Defense When it comes to aerospace and defense applications, we offer some of the most rugged and robust memory products in the market. Our products not only meet the industries stringent standards but also exceed many critical performance requirements, such as reliability and data security. Aerospace and Defense 8

9 New Flash Product Naming Rule 2.5 SATA SSD 3IE Form Factor SSD Slim SSD SATADOM SATA Slim msata mini PCIeDOM M.2-SATA(NGFF) CF-SATA CFast CF Card EDC SD microsd USB nanossd Generation 3: Generation III 2: Generation II 1: Generation I Flash Type S: SLC We offer a series of products with SLC-based flash, boasting faster write speeds, lower power consumption and higher cell endurance. SLC-based flash is more reliable and suitable of critical applications. M: MLC The primary benefit of MLC-based flash is its lower cost per unit of storage due to the higher data density. This benefit makes MLC-based flash a perfect replacement of traditional HDD. Application & Series E: Embedded G: EverGreen R: InnoRobust I: islc islc is innodisk s exclusive firmware technology, which improves the performance and data quality with similar write performance of SLCbased solutions. Through the use of flash management algorithms, islc improves SSD endurance up to 30,000 times. G: EverGreen EverGreen Series is applied with an evolved L 2 Architecture which significantly improves SSD random data transfer rate and lifespan. These features are suitable for specific applications and are best suited for data file sizes smaller than or equal to 128KBytes. When used in that way, EverGreen lifespan can be extended over 30 times than general MLC-based SSD. E: Embedded Embedded series is the best solution for the industrial embedded system because it offers reliability, high performance and long endurance. We offer complete form factors to fulfill customer and business needs, including 2.5 SSD, 1.8 SSD, SAT.ADOM, msata, SATA Slim, SATADOM, icf & CFast, EDC, and SD. R: InnoRobust InnoRobust series meets all of today s aerospace and defense application requirements. InnoRobust storage products are fully compliant with aerospace and defense standards,including MIL-STD-810F/G and MIL-I-46058C. InnoRobust products are fully protected against heat, dust, extreme temperatures, shock, vibration, and other environmental stresses. We also deliver industry-leading data protection technologies to keep sensitive information secure. Product specifications are subject to change without prior notice. 9

10 Table of Contents Flash Memory Products nanossd SSD SATADOM SATA Slim DRAM Module Products Embedded...28 Server...32 Wide Temperature Special / Customized msata...20 M.2-SATA(NGFF) Mini PCIeDOM CFast...23 CF Card...23 EDC...24 Embedded Peripheral Modules MiniPCIe(EMXX)...39 M.2(NGFF)(EGXX)...41 Standard PCIe(ESXX) Others(E2XX and E3XX) SD/micro SD...24 USB...25 ismart...26 icover

11 Flash Memory Innodisk flash memory products are designed to be highly reliable and stable, and provide longer life cycles for the embedded and industrial systems in which they are used. Innodisk offers the industry s widest selection of flash memory form factors, including standard 1.8 and 2.5 Industrial SSDs, SATADOM the smallest high-speed SATA storage in the industry, CompactFlash Cards, msata, SATA Slim, and USB Flash Drives. Our products are available in single-layer cell (SLC) and multi-layer cell (MLC) flash types. Product specifications are subject to change without prior notice. 11

12 nanossd The Innodisk nanossd is an integrated SATA storage device. It combines Innodisk's ID106 NAND flash controller and latest NAND flash in a JEDEC MO-276(SATA μssd) form factor with one single ball grid array (BGA) package, which makes nanossd within a tiny dimension, and very easy to design in. The Innodisk nanossd, supporting SATA III 6.0Gbp/s, offers excellent high data transfer rates, along with lower power consumption. It is an ideal solution for any kind of miniaturization applications. Benefits of nanossd Chip type, easy to design in without mechanical interference SATA interface, highly compatible with x86 system Excellent data transfer rates Fully compliant with industrial standard Suitable for ultra-thin or compact system Zero peripheral circuit 1.7 Features Integrated NAND Flash controller with Flash in a single chip Compliant with JEDEC MO-276 (SATA μssd) specification Adopted SATA III interface with BGA package Intelligent Flash management & real time garbage collection The Innodisk nanossd SATA Eye Pattern BOTTOM VIEW DETAIL A The Innodisk nanossd mechanical drawing Model Name nanossd 3IE nanossd 3SE nanossd 3ME Interface 1. Using BGA package to make controller and flash as single chip 2. Adopt SATA III interface,well Compatibility 3. Complaint with JEDEC MO-276 SPEC SATA III 6.0Gb/s Flash Type islc SLC MLC Capacity 8~32GB 2~16GB 8~64GB Max. Channel 4 Sequential R/W (MB/sec, max.) 480/ / /160 Max. Power Consumption 2.8W Thermal Sensor External DRAM Buffer icell TRIM ATA Security S.M.A.R.T Dimension (WxLxH/mm) 16.0 x 20.0 x 1.7 Environment N N N N Y Y Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours Standard Temp. OP (0 C~+70 C) DHNSD-XXXD062C*** DENSD-XXXD06SC*** DENSD-XXXD06SC*** Wide Temp. OP (-40 C~+85 C) N/A DENSD-XXXD06SW*** N/A Note XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) 12

13 SSD Innodisk SSDs bring a whole new level of high performance to memory storage. Our wide selection of SSDs are designed for different applications, including industrial/embedded, enterprise server, aviation, defense, and other semi-industrial applications, such as thin clients, POS, and kiosk. Our SSDs come in islc, SLC and MLC types, and support PATA/IDE 44 pin, SATA II (3.0Gb/s), and SATA III (6.0Gb/s). Model Name 2.5" SATA SSD 3IE 2.5" SATA SSD 3SE-P 2.5 SATA SSD 3SE 2.5" SATA SSD 3SR-P 2.5" SATA SSD 3MR-P 1. Cost-effective industrial Flash with islc 2. Lifespan 7 times longer than MLC 3. Performance and data quality congruent to SLC 1. Built-in DRAM buffer 2. Intelligent error recovery system 3. Excellent data transfer speed 4. idata Guard protection 1. Intelligent error recovery system 2. Excellent data transfer speed 3. idata Guard protection 1. Compliant with MIL-STD-810-F/G 2. HW/SW Data Security (QEraser/ Destroy/ SEraser/ Write Protect) 3. icell supported, 100% data protection 1. Compliant with MIL-STD-810-F/G 2. HW/SW Data Security (QEraser/ Destroy/ SEraser/ Write Protect) 3. icell supported, 100% data protection Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type islc SLC SLC SLC MLC Capacity 8GB-256GB 8GB-512GB 8GB-512GB 8GB-512GB 32GB-512GB Max. Channel Sequential R/W (MB/sec, max.) 500/ / / / /340 Max. Power Consumption 4.3W (5V x 870mA) 3.15W (5Vx630mA) 2.75W (5Vx550mA) 3.25W (5Vx650mA) 5W (5V x 1A) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N Y N Y Y icell N Optional N Y Y TRIM N Y N Y Y ATA Security Y Y Y Y Y S.M.A.R.T Y Y Y Y Y Dimension (WxLxH/mm) 69.8 x x X 99.8 X X 99.8 X X 99.8 X x 99.8 x 9.2 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours Standard Temp. OP (0 C~+70 C) DHS25-XXXD062C*** DES25-XXXD67SC***(P) DES25-XXXD06SC*** DRS25-XXXD67SC*** DRS25-XXXD67%C*** Wide Temp. OP (-40 C~+85 C) DHS25-XXXD062W*** DES25-XXXD67SW***(P) DES25-XXXD06SW*** DRS25-XXXD67SW*** DRS25-XXXD67%W*** Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12, 1TB=01T ) ***= flash configuration (internal control code) %=Flash Model Name 2.5" SATA SSD 3ME 2.5" SATA SSD 3ME2 2.5" SATA SSD 3ME3 2.5" SATA SSD 3MG-P 2.5" SATA SSD 3MG2-P 1. 7mm height mechanical design 2. Low power consumption 3. Budget - friendly MLCbased solution 1. High IOPS with DRAM-less design 2. 7mm height mechanical design 3. Low power consumption 1. High IOPS with DRAM-less design 2. 7mm height mechanical design 3. Low power consumption 1. EverGreen L² architecture 2. 7mm height mechanical design 3. Excellent random performance 1. EverGreen L² architecture 2. High Sequential/IOPS performance 3. Support DEVSLP 4. idata Guard Protection Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC MLC MLC MLC MLC Capacity 8GB-512GB 32GB-256GB 8GB-256GB 8GB-512GB 8GB-1TB Max. Channel Sequential R/W (MB/sec, max.) 470/ / / / /460 Max. Power Consumption 4.3W (5V x 870mA) 1.7W (5Vx335mA) 4.3W (5V x 870mA) 5W (5V x 1A) 6W (5Vx1.2A) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N N N Y Y icell N N Optional Optional Optional TRIM N Y Y Y Y ATA Security Y Y Y Y Y S.M.A.R.T Y Y Y Y Y Dimension (WxLxH/mm) 69.8 x x X X X X x x X X 6.8 Environment Standard Temp. OP (0 C~+70 C) Wide Temp. OP (-40 C~+85 C) Notes DES25-XXXD06%C*** DES25-XXXD07%C*** DES25-XXXD06%W*** DES25-XXXD07%W*** Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million DES25-XXXD72%C*** DES25-XXXD72%W*** DES25-XXXD09SC*** DES25-XXXD08SC*** DES25-XXXD09SW*** DES25-XXXD08SW*** DGS25-XXXD81%C***(P) DGS25-XXXD81%W***(P) DGS25-XXXD81%C***(P) DGS25-XXXD81%W***(P) XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12, 1TB=01T ) ***= flash configuration (internal control code) %=Flash Type Product specifications are subject to change without prior notice. 13

14 Model Name Slim SSD 3ME 1.8" SATA SSD 3SR-P 1.8" housing, 50% space saving 1. Compliant with MIL-STD-810-F/G 2. SW Data Security (QEraser/Destroy/SEraser/Write Protect) Interface SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC SLC Capacity 8GB~ 128GB 8GB~ 256GB Max. Channel 4 4 Sequential R/W (MB/sec, max.) 460/ /340 Max. Power Consumption 1.6W (5V x 310mA) 3W (5V x 600mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N Y icell N N TRIM N Y ATA Security Y Y S.M.A.R.T Y Y Dimension (WxLxH/mm) 69.8 x 50.0 x x 78.5 x 5.0 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million Standard Temp. OP (0 C~+70 C) DEMLM-XXXD07%C*** DRS18-XXXD67%C*** Wide Temp. OP (-40 C~+85 C) DEMLM-XXXD07%W*** DRS18-XXXD67%W*** Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type What is icell? What is TRIM? Innodisk's R&D team has developed icell Technology into several SSD drives. icell Technology ensures reliable and accurate data transfers, even in the event of an abnormal power failure. SSDs are made up of millions of NAND flash cells. They can be written into groups called pages (generally 4KB in size) but can only be erased in larger groups called blocks (generally 128 pages or 512KB). The addresses of the deleted files, or HDD formats are sent along with the TRIM command to the SSD s controller so the drive can function optimally. TRIM commands clean up garbage data on the SSD that can slow performance down. The TRIM command is generally sent from the OS when the system is idle this cleans up the blocks with data that need to be erased so that the drive can perform like new. 14

15 SATADOM Innodisk s Serial ATA Disk on Module (SATADOM) is the world s smallest form factor with exclusive Pin 7 VCC built-in, which simplifies motherboard design. Since it has no external cables, it is more robust and enhances the disk functions of various industrial and enterprise applications. Innodisk s SATADOM also supports the SATA II and SATA III interface with faster data transfer rates and is available in capacities ranging from 512MB up to 128GB. SATADOM advantage Smallest high speed SATA storage, supports low profile 1U Rack-mounted Up to 128GB, great for SATA storage device Reliable industrial grade quality No moving parts for better vibration and shock resistance Custom Firmware service available Qualified by Intel, Supermicro etc. Available in Standard & Industrial temperature Recommendation for Pin7 VCC issues Innodisk suggests that customers who want to use products with the Pin7 VCC feature do so as a design-in feature, including a fuse circuit to prevent over-current issues. We recommend our reference circuit to protect the motherboard and device by using either a "POWER SWITCH" or "JUMPER + FUSE" *Warning DO NOT lay out 5V VCC on the SATA socket directly. Pin7 VCC MB Reference Circuit Design Model Name SATADOM-ML 3IE SATADOM-SL 3IE SATADOM-SV 3IE SATADOM-MV 3IE 1. Vertical and low-profile design for 1U server 2. Cost-effective industrial Flash with islc 3. Write protect 4. Lifespan 7 times longer than MLC 5. Performance and data quality congruent to SLC 1. Vertical and low-profile design for 1U server 2. Cost-effective industrial Flash with islc 3. Best boot drive solution 4. Lifespan 7 times longer than MLC 5. Performance and data quality congruent to SLC 1. Cost-effective industrial Flash with islc 2. Lifespan 7 times longer than MLC 3. Performance and data quality congruent to SLC 1. Vertical version 2. Cost-effective industrial Flash with islc 3. Lifespan 7 times longer than MLC 4. Performance and data quality congruent to SLC Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type islc islc islc islc Capacity 8GB-64GB 8GB-32GB 8GB-32GB 8GB-64GB Max. Channel Sequential R/W (MB/sec, max.) 500/ / / /220 Max. Power Consumption 2W (5V x 400mA) 1.8W (5V x 370mA) 1.8W (5V x 370mA) 1W (5V x 200mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N N N N icell N N N N TRIM N N N N ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y Dimension (WxLxH/mm) 35.5 x 30 x x29.5x x 39.5 x x41.5x6.8 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million Standard Temp. OP (0 C~+70 C) DHSML-XXXD062C***(F) DESSL-XXXD072C***(F) DESSV-XXXD072C***(F) DHSMV-XXXD062C***(F) Wide Temp. OP (-40 C~+85 C) DHSML-XXXD062W***(F) DESSL-XXXD072W***(F) DESSV-XXXD072W***(F) DHSMV-XXXD062W***(F) Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type Product specifications are subject to change without prior notice. 15

16 Model Name SATADOM-SV 3SE SATADOM-ML 3SE-P SATADOM-ML 3SE SATADOM-SL-3SE 1. Vertical version 2. Anti-vibration mechanical design 1. Vertical and low-profile design for 1U server 2. High IOPS 3. Write protect 4. High performance 1. Vertical and low-profile design for 1U server 2. Write protect 3. High performance 1 Vertical and low-profile design for 1U server 2. Write protect 3. High performance Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type SLC SLC SLC SLC Capacity 512MB~32GB 8GB-64GB 8G-64GB 512MB~32GB Max. Channel Sequential R/W (MB/sec, max.) 300/ / / /130 Max. Power Consumption 0.9W (5V x 180mA) 2W(5V x 400mA) 2W(5V x 400mA) 0.9W (5V x 180mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N Y N N icell N N N N TRIM N Y N N ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y Dimension (WxLxH/mm) 20.9 x 39.5 x x 30 x x30x x29.5x8 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million Standard Temp. OP (0 C~+70 C) DESSV-XXXD07SC***(F) DESML-XXXD67SC***(F) DESML-XXXD06SC***(F) DESSL-XXXD07*C***(F) Wide Temp. OP (-40 C~+85 C) DESSV-XXXD07SW***(F) DESML-XXXD67SW***(F) DESML-XXXD06SW***(F) DESSL-XXXD07*W***(F) Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type Model Name SATADOM-MH 3SE SATADOM-SH 3SE SATADOM-SH Type C 3SE SATADOM-SH Type D 3SE 1. Low-profile design 2. Write protect 3. High performance 1. Low profile horizontal design 2. Only expose 12mm height on the motherboard when applying in practical 1. Low profile horizontal design 2. Opposite direction of SATADOM-SH Low profile horizontal design Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type SLC SLC SLC SLC Capacity 4GB-32GB 512MB-32GB 512MB-32GB 512MB-32GB Max. Channel Sequential R/W (MB/sec, max.) 260/ / / /120 Max. Power Consumption 1.8W (5Vx360mA) 0.9W (5V x 180mA) 0.9W (5V x 180mA) 0.9W (5V x 180mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N N N N icell N N N N TRIM N N N N ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y Dimension (WxLxH/mm) 40.0 x 30.0 x x 30.3 x x 18 x x 20.3 x 12.0 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 CMTBF: >3 million hours Stantard Temp. OP (0 C~+70 C) DESMH-XXXD07SC***(F) DESSH-XXXD07*C***(F) DESSF-XXXD07*C***(F) DESSF-XXXD07*C***(F) Wide Temp. OP (-40 C~+85 C) DESMH-XXXD07SW***(F) DESSH-XXXD07*W***(F) DESSF-XXXD07*W***(F) DESSF-XXXD07*W***(F) Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type 16

17 Model Name SATADOM-MV 3ME SATADOM-MV 3ME3 SATADOM-ML 3MG-P SATADOM-ML 3ME 1. Vertical version 2. Write protect 3. Anti-vibration mechanical design 1. Vertical version 2. High IOPS 3. Write protect 4. Supports TRIM 1. Vertical and low-profile design for 1U server 2. High IOPS 3. Write protect 4. High performance 1. Vertical and low-profile design for 1U server 2. Write protect 3. High performance Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC MLC MLC MLC Capacity 16GB-128GB 16GB-128GB 16GB-128GB 16GB-128GB Max. Channel Sequential R/W (MB/sec, max.) 460/ / / /160 Max. Power Consumption 1W (5V x 200mA) 1W (5V x 200mA) 2W (5V x 400mA) 2W (5V x 400mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N N Y N icell N N N N TRIM N Y Y N ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y Dimension (WxLxH/mm) 25.3 X 41.5X x 41.5 x x 30 x x 30 x 9.5 Environment Standard Temp. OP (0 C~+70 C) Wide Temp. OP (-40 C~+85 C) Notes DESMV-XXXD07%C***(F) DESMV-XXXD06%C***(F) DESMV-XXXD07%W***(F) DESMV-XXXD06%W***(F) Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million DESMV-XXXD09SC***(F) DESMV-XXXD08SC***(F) DESMV-XXXD09SW***(F) DESMV-XXXD08SW***(F) DGSML-XXXD67%C***(F) DGSML-XXXD67%W***(F) DESML-XXXD06%C***(F) DESML-XXXDO6%W***(F) XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type Model Name SATADOM-ML 3ME3 SATADOM-SL 3ME SATADOM-SL 3ME3 SATADOM-SV 3ME SATADOM-SV 3ME3 1. Low-profile design for 1U server 2. High IOPS 3. Write protect 1. Vertical and low-profile design for 1U server 2. Best boot drive solution 3. Lower power consumption 1. Vertical and low-profile design for 1U server 2. High IOPS 3. Best boot drive solution 4. Lower power consumption 1. Vertical version 1. Vertical version 2. Anti-vibration mechanical 2. High IOPS design 3. Best boot drive solution Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC MLC MLC MLC MLC Capacity 16GB-256GB 4GB-64GB 8GB-128GB 4GB-64GB 8GB-128GB Max. Channel Sequential R/W (MB/sec, max.) 355/ /80 200/75 300/80 200/75 Max. Power Consumption 2W (5V x 400mA) 0.9W (5V x 180mA) 1.8W (5V x 370mA) 1.8W (5V x 370mA) 1.8W (5V x 370mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N N N N N icell N N N N N TRIM Y N Y N Y ATA Security Y Y Y Y Y S.M.A.R.T Y Y Y Y Y Dimension (WxLxH/mm) 35.5x30x x 29.5 x x 29.5 x x 39.5 x x 39.5 x 7.9 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours Standard Temp. OP (0 C~+70 C) DESML-XXXD08SC***(F) DESSL-XXXD07%C***(F) DESSL-XXXD09SC***(F) DESSV-XXXD07%C***(F) DESSV-XXXD09SC***(F) Wide Temp. OP (-40 C~+85 C) DESML-XXXD08SW***(F) DESSL-XXXD07%W***(F) DESSL-XXXD09SW***(F) DESSV-XXXD07%W***(F) DESSV-XXXD09SW***(F) Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type Product specifications are subject to change without prior notice. 17

18 Model Name SATADOM-MH 3ME SATADOM-MH 3ME3 SATADOM-SH 3ME 1. Horizontal design 2. Write protect 1. Horizontal design 2. High IOPS 3. Write protect Low profile horizontal design Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC MLC MLC Capacity 8GB-128GB 8GB-128GB 4GB-32GB Max. Channel Sequential R/W (MB/sec, max.) 300/ /75 280/80 Max. Power Consumption 1W (5V x 200mA) 1W (5V x 200mA) 1.8W (5V x 370mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N N N icell N N N TRIM N Y N ATA Security Y Y Y S.M.A.R.T Y Y Y Dimension (WxLxH/mm) 40.0 X 30.0 X x 30.0 x x 30.3 x 12.5 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 CMTBF: >3 million hours Standard Temp. OP (0 C~+70 C) DESMH-XXXD07%C***(F) DESMH-XXXD09SC***(F) DESSV-XXXD07%C***(F) Wide Temp. OP (-40 C~+85 C) DESMH-XXXD07%W***(F) DESMH-XXXD09SW***(F) DESSV-XXXD07%W***(F) Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type Model Name SATADOM-SH 3ME3 SATADOM-SH Type C 3ME3 SATADOM-SH Type D 3ME SATADOM-SH Type D 3ME3 1. Low profile horizontal design 2. High IOPS 1. Low profile horizontal design 2. High IOPS 3. Opposite direction of SATADOM-SH 1. Low profile horizontal design 1. Low profile horizontal design 2. High IOPS Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC MLC MLC MLC Capacity 8GB~128GB 8GB~128GB 4G-32GB 8GB~128GB Max. Channel Sequential R/W (MB/sec, max.) 200/75 200/75 150/40 200/75 Max. Power Consumption 1.8W (5V x 370mA) 1.8W (5V x 370mA) 1.8W (5V x 370mA) 1.8W (5V x 370mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N N N N icell N N N N TRIM Y Y N Y ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y Dimension (WxLxH/mm) 18.0 x 30.3 x x 30.3 x x 27.5 x x 27.5 x 12.0 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 CMTBF: >3 million hours Stantard Temp. OP (0 C~+70 C) DESSV-XXXD09SC***(F) DESSC-XXXD09SC***(F) DESSF-XXXD07%C***(F) DESSF-XXXD09SC***(F) Wide Temp. OP (-40 C~+85 C) DESSV-XXXD09SW***(F) DESSC-XXXD09SW***(F) DESSF-XXXD07%W***(F) DESSF-XXXD09SW***(F) Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type 18

19 SATA Slim The Innodisk SATA Slim is compliant with the JEDEC SFF-8156 standard form factor and ATA protocol. It does not require drivers, and can be configured as a boot device or a data storage device. It is also suitable for portable/hand-held devices, thin clients, and industrial applications that require the effective reduction of operation system boot time and power consumption. With a 7+15 pin SATA interface, the Innodisk SATA Slim supports most platforms with a standard SATA port. Model Name SATA Slim 3IE SATA Slim 3SE-P SATA Slim 3SE SATA Slim 3MG-P 1. Cost-effective industrial Flash 1. Half Slim, space saving with islc 2. High quality SLC-based solution 2. Lifespan 7 times longer than MLC 3. Excellent data transfer speed 3. Performance and data quality 4. Compatible with JEDEC MO297 congruent to SLC 1. Half Slim, space saving 2. High quality SLC-based solution 3. Compatible with JEDEC MO EverGreen L² architecture 2. Excellent data transfer speed 3. Compatible with JEDEC MO297 Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type islc SLC SLC MLC Capacity 4GB-128GB 4GB-128GB 4GB-128GB 8GB-256GB Max. Channel Sequential R/W (MB/sec, max.) 460/ / / /240 Max. Power Consumption 1.6W (5V x 315mA) 1.65W (5V x 330mA) 1.1W (5Vx220mA) 2.1W (5V x 428mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N Y N Y icell N N N N TRIM N Y N Y ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y Dimension (WxLxH/mm) 54.0 x 39.8 x x 39.8 x x 39.8 x x 39.8 x 4.0 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours Standard Temp. OP (0 C~+70 C) DHSLM-XXXD06SC*** DESLM-XXXD67SC*** DESLM-XXXD06SC*** DGSLM-XXXD67%C*** Wide Temp. OP (-40 C~+85 C) DHSLM-XXXD06SW*** DESLM-XXXD67SW*** DESLM-XXXD06SW*** DGSLM-XXXD67%W*** Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type 3Model Name SATA Slim 3MG2-P SATA Slim 3ME SATA Slim 3ME2 SATA Slim 3ME3 1. EverGreen L² architecture 2. High Sequential/IOPS performance 3. Support DEVSLP 4. idata Guard Protection 1. Half Slim,space saving 2. Budget -friendly MLC-based solution 3. Compatible with JEDEC MO Half Slim,space saving 2. High IOPS 3. Budget -friendly MLC-based solution 4. Compatible with JEDEC MO Half Slim,space saving 2. High random performance 3. Budget -friendly MLC-based solution 4. Compatible with JEDEC MO297 Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC MLC MLC MLC Capacity 8GB-128GB 8GB-128GB 32GB~256GB 8GB-256GB Max. Channel Sequential R/W (MB/sec, max.) 520/ / / /75 Max. Power Consumption 2.6W (5Vx520mA) 1.6W(5V x 315mA) 1.7W (5V x 335mA) 1.6W(5V x 315mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer Y N N Y icell N N N N TRIM Y N Y Y ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y Dimension (WxLxH/mm) 54.0 x 39.8 x x 39.8 x X 39.8 X x 39.8 x 4.0 Environment Standard Temp. OP (0 C~+70 C) Wide Temp. OP (-40 C~+85 C) Notes Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours DGSLM-XXXD81%C*** DGSLM-XXXD81%W*** DESLM-XXXD07%C*** DESLM-XXXD06%C*** DESLM-XXXD07%W*** DESLM-XXXD06%W*** DESLM-XXXD72%C*** DESLM-XXXD72%W*** DESLM-XXXD09%C*** DESLM-XXXD08%C*** DESLM-XXXD09%W*** DESLM-XXXD08%W*** XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type Product specifications are subject to change without prior notice. 19

20 msata msata, which is distinct from the micro connector, was announced by the Serial ATA International Organization on September 21, Applications include netbooks, portable devices and other devices that require a smaller solid-state drive. The connector is similar in appearance to a PCI Express Mini Card interface and is electrically compatible; however, the data signals need a connection to the SATA host controller instead of the PCI-express host controller. Innodisk s msata supports high-performance data transfer rates of 1.5 Gb/s, 3.0 Gb/s and 6.0 Gb/s. Model Name msata 3IE msata 3SE-P msata 3SE msata 3ME 1. Cost-effective industrial Flash with islc 2. Lifespan 10 times longer than MLC 3. Performance and data quality congruent to SLC 4. Excellent data transfer speed 1. Excellent data transfer speed and IOPS 2. Support TRIM command 3. Built-in DRAM buffer 1. Excellent data transfer speed and IOPS 2. High quality SLC-based solution 1. Excellent data transfer speed and IOPS 2. Budget- friendly MLC-based solution Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type islc SLC SLC MLC Capacity 8GB~64GB 8GB~64GB 4GB~64GB 4GB-128GB Max. Channel Sequential R/W (MB/sec, max.) 460/ / / /160 Max. Power Consumption 1.1 W (3.3V x 335 ma ) 1.2 W (3.3V x 360 ma ) 1.1 W (3.3V x 319 ma ) 1.1W (3.3V x 335mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N Y N N icell N N N N TRIM N Y N N ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y Dimension (WxLxH/mm) 29.8 x 50.8 x x 50.8 x x 50.8 x x 50.8 x 3.4 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours*** Standard Temp. OP (0 C~+70 C) DHMSR-XXXD063C*** DEMSR-XXXD67SC*** Wide Temp. OP (-40 C~+85 C) DHMSR-XXXD062W*** DEMSR-XXXD67SW*** Note DEMSR-XXXD06SC*** DEMSR-XXXD07SC*** DEMSR-XXXD06SW*** DEMSR-XXXD07SW*** XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G) ***= flash configuration (internal control code)%=flash Type DEMSR-XXXD07%C*** DEMSR-XXXD06%C*** DEMSR-XXXD07%W*** DEMSR-XXXD06%W*** Model Name msata 3ME2 msata 3ME3 msata 3MG-P msata mini 3ME msata mini 3ME3 1. Excellent data transfer speed and IOPS 2. Budget- friendly MLC-based solution 1. Excellent data transfer speed and IOPS 2. Budget- friendly MLC-based solution 1. EverGreen L² architecture 2. Intelligent error recovery system 3. Built-in DRAM buffer 1. Write protect 1. Write protect 2. Half msata50% space 2. Half msata50% space saving saving 3. Low power consumption 3. Low power consumption Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC MLC MLC MLC MLC Capacity 16GB~256GB 8GB-256GB 8GB~128GB 4GB~128GB 8GB~64GB Max. Channel Sequential R/W (MB/sec, max.) 440/ / / /80 200/70 Max. Power Consumption 2.6W (3.3V x 810 ma ) 1.4W (3.3V x 434 ma ) 1.3 W (3.3V x 390mA ) 0.8W (3.3V x 240mA) 0.77W (3.3V x 234mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N N Y N N icell Y Y N N N TRIM Y Y Y N Y ATA Security Y Y Y Y Y S.M.A.R.T Y Y Y Y Y Dimension (WxLxH/mm) 29.8 x 50.8 x x 50.8 x x 50.8 x x 26.8 x x 26.8 x 3.5 Environment Standard Temp. OP (0 C~+70 C) Wide Temp. OP (-40 C~+85 C) Note Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours*** DEMSR-XXXD72SC*** DEMSR-XXXD72SW*** DEMSR-XXXD09SC*** DEMSR-XXXD08SC*** DEMSR-XXXD09SW*** DEMSR-XXXD08SW*** DGMSR-XXXD67%C*** DEMSM-XXXD07%C*** DEMSM-XXXD09%C*** DGMSR-XXXD67%W*** DEMSM-XXXD07%W*** DEMSM-XXXD09%W*** XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type

21 M.2-SATA(NGFF) M.2-SATA (NGFF) stands for Next Generation Form Factor, which is comprised of several interfaces and the corresponding system interconnect based on 67pin edge card connectors. The Innodisk M.2-SATA (NGFF) offers wide range capacities in several standard form factors to fulfill different applications, including type 2242, type 2260, type 2280, and Benefits Small form factor, M.2 (S42) save about 40% PCB dimension compared to Mini PCIe form factor Innodisk's exclusive idata Guard ensures reliable data transfers in the event of an abnormal power failure Fully compliant with industrial standard Suitable for ultra-thin or compact system M Features Adopted SATA III 6.0 Gb/s interface, complaint with M.2 ( NGFF ) type 2242 and 2280 Excellent data transfer speed in small form factor icell technology for data protection Supports ismart disk health monitoring M Model Name M.2 (S42) 3IE M.2 (S42) 3SE M.2 (S42) 3ME3 1. Type 2242-D2-B-M 2. Cost-effective industrial flash with islc 3. idata Guard Protection 1. Type 2242-D2-B-M 2. High quality SLC-based solution 3. idata Guard Protection 1. Type 2242-D2-B-M 2. High IOPS 3. idata Guard Protection Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type islc SLC MLC Capacity 8GB~32GB 1GB~32GB 8GB~128GB Max. Channel Sequential R/W (MB/sec, max.) 300/ / /75 Max. Power Consumption 0.5W (3.3V x 150mA ) 0.5 W (3.3V x 150 ma ) 0.5W (3.3V x 150mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N N N icell N N N TRIM N N Y ATA Security Y Y Y S.M.A.R.T Y Y Y Dimension (WxLxH/mm) 22.0 x 42.0 x x 42.0 x x42.0x3.4 Environment Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours Standard Temp. OP (0 C~+70 C) DHM24-XXXD072C*** DEM24-XXXD07SC*** DEM24-XXXD09%C*** Wide Temp. OP (-40 C~+85 C) DHM24-XXXD072W*** DEM24-XXXD07SW*** DEM24-XXXD09%W*** Note XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G) ***= flash configuration (internal control code) %=Flash Type Product specifications are subject to change without prior notice. 21

22 l Model Name M.2 (S80) 3MG2-P M.2 (S80) 3SE 1. Type 2280-D2-B-M 2. High Sequential/IOPS performance 3. Support DEVSLP 4. idata Guard Protection 1. Type 2280-D2-B-M 2. High quality SLC-based solution 3. idata Guard Protection Interface SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC SLC Capacity 128GB~512GB 32GB~256GB Max. Channel 4 4 Sequential R/W (MB/sec, max.) 420/ /350 Max. Power Consumption 3.63W (3.3Vx1.1A ) 1.3W (3.3V x 390mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer Y N icell N N TRIM Y N ATA Security Y Y S.M.A.R.T Y Y Dimension (WxLxH/mm) 22.0 X 80.0 X x80.0x3.5 Environment Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours Standard Temp. OP (0 C~+70 C) DGM28-XXXD81%C*** DEM28-XXXD06SC*** Wide Temp. OP (-40 C~+85 C) DGM28-XXXD81%W*** DEM28-XXXD06SW*** Note XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type Mini PCIeDOM The Innodisk Mini PCIeDOM is a Flash based disk module with standard Mini PCIe form factor, and PCI Express Gen.1 interface. It is suitable for board maker or SI to design in the product as a boot drive or a storage device. Meanwhile, it supports multiple operation systems and no driver needed, including Windows XP, Windows 7, and Linux based OS. Model Name Mini PCIeDOM 1SE Mini PCIeDOM 1ME 1. Standard PCIe Interface 2. Driver-less 1. Standard PCIe Interface 2. Driver-less Interface PCI Express Gen.1 x1 PCI Express Gen.1 x1 Flash Type SLC MLC Capacity 4GB~64GB 8GB~128GB Max. Channel 4 2 Sequential R/W (MB/sec, max.) 85/85 170/120 Max. Power Consumption 2.3 W (3.3V x 700 ma ) 2 W (3.3V x 6200 ma ) Thermal Sensor STD: N, W/T: Y External DRAM Buffer N N icell N N TRIM N N ATA Security Y Y S.M.A.R.T Y Y Dimension (WxLxH/mm) 30 x x 5 30 x x 5 Environment Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours Standard Temp. OP (0 C~+70 C) DEEDM-XXXJ30AC*** DEEDM-XXXD07SC*** Wide Temp. OP (-40 C~+85 C) DEEDM-XXXJ30AW*** DEEDM-XXXD07SW*** Note XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type 22

23 CFast The Innodisk CFast is a small form factor card standard with high data storage capacity. It is suitable for semi-industrial applications. Compliant with the CFast 2.0 standard, it is designed with a 7+17 pin connector and is SATA compatible. The Innodisk CFast offers data transfer rates of sequential read up to 470 MB/sec. and of sequential write up to 280MB/sec. Moedel Name CFast 3IE CFast 3SE CFast 3ME CFast 3ME3 1. Cost-effective industrial Flash with 1. Compliant with CFast 2.0 islc standard 2. Lifespan 7 times longer than 2. Excellent data transfer speed MLC 3. Support hardware write protect 3. Performance and data quality congruent to SLC 4. Support hardware write protect 1. Compliant with CFast 2.0 satndard 2. Budget friendly MLC-based solution 3. Support hardware write protect 1. Compliant with CFast 2.0 satndard 2. Buget friendly MLC-based solution 3. Support hardware write protect 4. High IOPS Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Connector 7+17pin 7+17pin 7+17pin 7+17pin Flash Type islc SLC MLC MLC Capacity 8GB~64GB 1GB~64GB 4GB~128GB 8GB~128GB Max. Channel Sequential R/W (MB/sec, max.) 310/ / / /110 Max. Power Consumption 1.1W (3.3V x 320mA) 1.1W (3.3V x 360mA) 1.1W (3.3V x 320mA) 1.1W (3.3V x 320mA) Thermal Sensor STD : N, W/T : Y External DRAM Buffer N N N N icell N N N N TRIM N N N Y ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y Dimension (WxLxH/mm) 42.8 x 36.4 x x 36.4 x x 36.4 x x 36.4 x3.6 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours Standard Temp. OP (0 C~+70 C) DHCFA-XXXD07%C*** DECFA-XXXD06SC*** DECFA-XXXD07%C*** DECFA-XXXD09%C*** Wide Temp. OP (-40 C~+85 C) DHCFA-XXXD07%W*** DECFA-XXXD06SW*** DECFA-XXXD07%W*** DECFA-XXXD09%W*** Note XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28) ***= flash configuration (internal control code) % =Flash Type CF Card Innodisk s Industrial CompactFlash Memory Card (icf) complies with the PCMCIA* ATA standard. Designed to replace traditional rotating disk drives, Innodisk icfs are embedded solid-state data storage systems that are designed for mobile computing and the industrial work place. l Model Name icf 9000 icf 1SE icf 1ME 1. High sustained data transfer speed 2. Enhanced power cycling management High quality SLC-based solution 1. Budget friendly MLC-based solution 2. Enhanced power cycling management Interface PATA PATA PATA Connector 50pin CF connector 50pin CF connector 50pin CF connector Flash Type SLC SLC MLC Capacity 1GB~64GB 512MB~8GB 4GB~128GB Max. Channel Sequential R/W (MB/sec, max.) 110/100 50/40 110/75 Max. Power Consumption 1.05W (5V x 210mA) 0.76W (3.3V x 230mA) 0.75W (5V x 150mA) 0.5W (3.3V x 150mA) 1.05W (5V x 150mA) 0.69W (3.3V x 150 ma) Thermal Sensor N N N ATA Security Y Y Y S.M.A.R.T Y Y Y Dimension (WxLxH/mm) 42.8 x 36.4 x x 36.4 x x 36.4 x 3.3 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours Standard Temp. OP (0 C~+70 C) DC1M-XXXD71%C*** DC1M-XXXD41AC*** DECFC-XXXD53%C*** Wide Temp. OP (-40 C~+85 C) DC1M-XXXD71%W*** DC1M-XXXD41AW*** DECFC-XXXD53%W*** Note Notes PIO mode 0-6 UDMA mode 0-7 PIO mode 0-6 UDMA mode 0-4 XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28) ***= flash configuration (internal control code) % =Flash Type PIO mode 0-6 UDMA mode 0-7 Product specifications are subject to change without prior notice. 23

24 EDC The Innodisk Embedded Disk Card (EDC) complies with PCMCIA* ATA standards and fits into all platforms with an IDE connector. The Innodisk Embedded Disk Card comes in capacities ranging from 128MB to 32GB and is available in 40-pin and 44-pin connector packages. Model Name EDC 1SE Vertical Type EDC 1SE Horizontal Type EDC 1ME Vertical Type EDC 1ME Horizontal Type 1. Dust prevention 2. High quality SLC-based solution 1. High quality SLC-based solution 2. Supported mounting hole 1. Budget- friendly MLC-based 1. Budget- friendly MLC-based solution solution 2. High performacne PATA solution 2. High performacne PATA solution Connector 40/44 pin 40/44 pin 44 pin 44 pin Interface PATA PATA PATA PATA Flash Type SLC SLC MLC MLC Capacity 512MB~4GB 512MB~8GB 4GB~64GB 4GB-128GB Max. Channel Sequential R/W (MB/sec, max.) 40/28 40/28 110/75 110/75 Max. Power Consumption 0.75W(5V x 150mA) 0.5W(3.3V x 150mA) 0.75W(5V x 150mA) 0.5W(3.3V x 150mA) 1.05W(5V x 150mA) 0.69W(3.3V x 150mA) 1.05W(5V x 150mA) 0.69W(3.3V x 150mA) Thermal Sensor N N N N External DRAM Buffer N N N N ATA Security Y Y Y Y Dimension (WxLxH/mm) S.M.A.R.T Y Y Y Y Environment Standard Temp. OP (0 C~+70 C) Wide Temp. OP (-40 C~+85 C) Note 40 pin: 60.2 x 27.3 x pin: 50.3 x 27.3 x pin (A,B type): 55 x 32.4 x pin (C,D type): 55 x 32.4 x pin (E,F type): 55 x 32.4 x pin (A,B type): 48 x 32.6 x pin (C,D type): 48 x 32.6 x pin (E,F type): 48 x 32.6 x x 27.3 x x 32.4 x 6.7 Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours DE0H-XXXD41AC*** DE4H-XXXD41AC*** DE0H-XXXD41AW*** DE4H-XXXD41AW*** DE0P%-XXXD41AC*** DE4P%-XXXD41AC*** DE0P%-XXXD41AW*** DE4P%-XXXD41AW*** DEE4H-XXXD53RC*** DEE4H-XXXD53RW*** XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28) ***= flash configuration (internal control code) %=Horizontal type(a, B, C, D, E, F) DEE4%-XXXD53RC*** DEE4%-XXXD53RW*** SD/micro SD Innodisk SD and microsd cards are single-level flash devices built for rugged applications in the embedded field. As an industrialgrade SD/microSD card, these cards deliver outstanding performance of up to 20MB per second as well as excellent endurance and reliability, especially compared to other cards used in the mobile market. The Innodisk SD and microsd cards are compatible with SD 2.0 standards and support SDHC Class 10. They also feature SMART technology, which monitors the reliability of these SD cards. Model Name Industrial micro SD Card Industrial SD Card Enhanced power cycling management 1. Designed for industrial applications 2. High reliability 3. Customizeable 4. Power Fail mangement 5. Supported SPI mode Interface SD 1.01/2.00 SD 3.00 Flash Type SLC SLC/MLC Capacity 1G~8GB SLC: 128MB~32GB MLC: 4GB~64GB Max. Channel 1 1 Sequential R/W (MB/sec, max.) 20/16 SLC: 35/25 MLC: 45/20 Max. Power Consumption 0.17W (3.3V x 50mA) 0.26W (3.3V x 77mA) S.M.A.R.T Y Y Dimension (WxLxH/mm) 11.0 x 15.0 x x 32.0 x 2.1 Environment Standard Temp. OP (-20 C~+85 C) Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55 C ~ +95 C MTBF: >3 million hours DS2M-XXXI81AC*** DESDC-XXXY81%C*** Wide emp. OP (-40 C~+85 C) DS2M-XXXI81AW*** DESDC-XXXY81%W*** Note XXX = density (02GB=02G, 04GB=04G, 08GB=08G) *** = flash configuration (internal control code) %=Flash Type 24