Equipment Checks and Calibrations
|
|
- Andrea Owens
- 7 years ago
- Views:
Transcription
1 Equipment Checks and Calibrations Paul McMullen Sector Manager, Calibration
2 This Session 1. Calibration: What is it? 2. A process of comparison 3. What about adjustment? 4. What is a check? 5. In-house calibrations 6. The equipment table/s
3 Calibration: What is it? An operation that, under specified conditions, 1. Establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties, and 2. Uses this information to establish a relation for obtaining a measurement result from an indication (Refer to ISO/IEC Guide 99 (VIM), definition 2.39)
4 A process of comparison Metrological Traceability: property of a measurement result whereby the result can be related to a reference through a documented unbroken chain of calibrations, each contributing to the measurement uncertainty. (Refer to ISO/IEC Guide 99 (VIM), definition 2.39)
5 Standards Hierarchy CGPM (General Conference on Weights and Measures) SI Units National Legal Units National Legislation
6 Standards Hierarchy First level standards NMI primary standards NMI secondary standards
7 Standards Hierarchy Second level standards Third level standards Laboratory primary standards Laboratory secondary standards Accredited and high level laboratories Measuring instruments Industry, commerce and community
8 National standards copies of IPK The International Prototype Kilogram (IPK), kept at BIPM (International Bureau of Weights and Measures, des Poids et Mesures) The National kilogram (NMI), a copy compared to IPK periodically
9 Working standards Calibrated from the National kilogram The National kilogram (NMI) An NMI secondary standard
10 Working standards Calibrated from the National kilogram The NMI secondary standard Laboratory primary calibration standard
11 Working standards Calibrated from the National kilogram Laboratory primary calibration standard Laboratory secondary standards
12 Working standards Calibrated from the National kilogram Precision balances Working mass sets Laboratory secondary standards
13 Working standards Calibrated from the National kilogram Trade and Industry weighing systems Working mass sets
14 Increasing Uncertainty Uncertainties in Mass 1.00E E E E E E E E+00 IPK National kg Secondary standards Laboratory calibration standards Laboratory masses Trade weighing Bathroom scales Relative Uncertainty
15 Calibration Is a series of measures made against known reference/s Across a predetermined range (extrapolation is not allowed) With a measurement uncertainty calculated for each measurement Calibrations may be made on equipment, instruments, artefacts & reference standards A calibration record is evidence of measurement traceability
16 Calibration A measurement made on an uncalibrated instrument is not reliable.
17 What about Adjustment? An adjustment is to change the sensitivity of the test equipment against a known reference. It is not part of the formal definition of calibration. An adjustment is often seen to be equivalent to a repair For many instruments, after an adjustment is made, a calibration must be repeated (pressure gauge) While other instruments are designed to perform an adjustment before measurement (balances) or before use (sound level meters)
18 What is a check? 1. A measurement of at least one point in a range of a measuring instrument or system or material against a known value to confirm that it has not deviated significantly from its original calibrated value. 2. It is also an examination of the condition of an artefact to determine that it has not been adversely affected by constant use.
19 What is a check? A check is a measure or inspection used to determine continuing stability of an item. Does not necessarily require traceability No measurement uncertainty is necessarily calculated Suitability of the check method must be evaluated Documented history of the check is preferable A check does not provide evidence of traceability
20 In-house calibrations Policy Circular 12, NATA requirements for the performance of calibrations inhouse, ensures all calibrations are carried out to the same standard. The policy applies to: internal use within a facility a central calibration facility carrying out calibrations for other accredited sections within their own organisation Notes a criteria level at which a critical parameter requires evidence of traceability (1/5 th ) of the largest single uncertainty component Provides guidance on how to assess in-house calibrations Notes that appropriate proficiency testing must be undertaking for the inhouse calibrations Provides guidance on how in-house calibrations are to be reported
21 The Equipment Table/s Are part of NATA s guidance documents Restate the definitions of Traceability, Calibration, Checks Reference NATA Policy Circulars 11 & 12 Provide excellent guidance for Laboratories to establish their own (fit for purpose) Equipment Assurance Program (LEAP) with consideration to be given to History of stability (of item) Frequency of use Accuracy required Requirement for traceability of measurement Ability of staff to perform in-house checks Successful participation in proficiency testing programs (for accredited testing)
22 The Equipment Table/s Equipment Assurance Programs are to cover: Commissioning of new equipment (if traceability is required the item must be calibrated before being used) Operational checking (checking during use with reference items) Periodic checking Scheduled maintenance Recalibrations Intervals between calibrations may be extended if the facility is able to justify (with supporting records) an extension The Reference Equipment Table is only for use by Calibration providers (this includes in-house calibrations)
23 The Equipment Table/s Where an Equipment Assurance Program is not established by a facility, then the minimum intervals for calibrations and checks are as detailed in the table/s, noting: It not a complete listing of laboratory equipment (just because an item is not listed, does not mean it does not require calibration) Are based on typical use and required accuracy The equipment is of good quality The facility has both the equipment capability and staff expertise to perform the requisite in house checks All of the subsidiary checks indicate satisfactory operation Otherwise shorter intervals between calibrations should be considered.
24 Summary Calibration: an activity that provides suitable traceability (usually involves a set of measurements together with a calculation of measurement uncertainty). Is technically assessed as a calibration activity (ILAC P14 requirements in NATA criteria). Check: An activity that demonstrates ongoing stability of an item. Suitability of the method must be demonstrated. Activity must be available for auditing. Accreditation is task specific and calibration activities are uniquely identified as such in scopes of accreditation In-house calibrations are covered by Policy Circular 12 The policy on measurement traceability for calibrations applies to in-house calibrations. Equipment Table/s - the preferred option is for each facility to establish their own equipment assurance program.
25 Questions?
CRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES
CRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES Prepared by: Technical Manager Approved by: Chief Executive Officer Approval Date: 2013-04-24 Effective
More informationIAS CALIBRATION and TESTING LABORATORY ACCREDITATION PROGRAMS DEFINITIONS
REFERENCES NIST Special Publication 330 IAS CALIBRATION and TESTING LABORATORY ACCREDITATION PROGRAMS DEFINITIONS Revised October 2013 International vocabulary of metrology Basic and general concepts and
More informationProcedure for Equipment Calibration and Maintenance
Procedure for Equipment Calibration and Maintenance 1.0 Purpose This procedure specifies the schedule and requirements for calibration, performance verification, and maintenance of State Crime Laboratory
More informationUser checks and maintenance of laboratory balances
Technical Note 13 March 2014 Issued: July 1995 Amended and reissued: July 2005, July 2007, October 2007, May 2010, March 2013, March 2014 User checks and maintenance of laboratory balances Copyright National
More informationR221 - Specific Requirements: Forensic
R221 - Specific Requirements: Forensic Page 1 of 6 R221 - Specific Requirements: Forensic (October 2015) 2015 by A2LA. All rights reserved. No part of this document may be reproduced in any form or by
More informationOMCL Network of the Council of Europe QUALITY MANAGEMENT DOCUMENT
OMCL Network of the Council of Europe QUALITY MANAGEMENT DOCUMENT PA/PH/OMCL (12) 77 7R QUALIFICATION OF EQUIPMENT ANNEX 8: QUALIFICATION OF BALANCES Full document title and reference Document type Qualification
More informationAmerican Association for Laboratory Accreditation
Page 1 of 18 Traceability for Life Sciences Testing and (October 2015) 2015 by A2LA. All rights reserved. No part of this document may be reproduced in any form or by any means without the prior written
More informationGap Analysis of ISO 15189:2012 and ISO 15189:2007 in the field of Medical Testing
Gap Analysis May 2013 Issued: May 2013 Gap Analysis of and in the field of Medical Testing Copyright National Association of Testing Authorities, Australia 2013 This publication is protected by copyright
More informationRULES FOR THE PARTICIPATION IN INTER- LABORATORY COMPARISONS AND PROFICIENCY TESTING SCHEMES
RULES FOR THE PARTICIPATION IN INTER- LABORATORY COMPARISONS AND PROFICIENCY TESTING SCHEMES Reviewed by: Natalija Jovičić Zarić MSc, Quality Manager Approved by: Milica Lukešević, Acting Director Any
More informationAmerican Association for Laboratory Accreditation
Page 1 of 15 R104 GENERAL REQUIREMENTS: ACCREDITATION OF FIELD TESTING AND FIELD CALIBRATION LABORATORIES July 2015 2015 by A2LA All rights reserved. No part of this document may be reproduced in any form
More informationISO 17025 and SANAS guidelines for use of reference materials and PT scheme participation Shadrack Phophi
ISO 17025 and SANAS guidelines for use of reference materials and PT scheme participation Shadrack Phophi The Innovation Hub, Pretoria Presentation layout 1. Introduction ISO/IEC 17025 2. Requirements
More informationInternational Laboratory Accreditation Cooperation. Laboratory Accreditation or ISO 9001 Certification? global trust. Testing Calibration Inspection
International Laboratory Accreditation Cooperation Laboratory Accreditation or ISO 9001 Certification? Laboratory Accreditation or ISO 9001 Certification? When selecting a supplier to fulfill your testing,
More informationCase study Realistic and best uncertainties with humidity instruments
Case study Realistic and best uncertainties with humidity instruments Domen Hudoklin September 2014 Brdo, Slovenia Humidity calibrations Dewpoint primary - against dewpoint generator secondary - against
More informationThe Calibration Chain: Role of BIPM,
The Calibration Chain: Role of BIPM, PSDLs and ADCLs J. Seuntjens and M. McEwen McGill University & National Research Council CANADA Clinical Dosimetry for Radiotherapy, 2009 AAPM Summer School PSDL ADCL
More informationISO/IEC 17025 ACCREDITATION REQUIREMENTS FOR CALIBRATION LABORATORIES
ISO/IEC 17025 ACCREDITATION REQUIREMENTS FOR CALIBRATION LABORATORIES AUTHORITY: VICE PRESIDENT EFFECTIVE DATE: 2015/01/01 DOCUMENT NUMBER: MA 2002 TABLE OF CONTENTS Foreword... 3 1. Application... 4 2.
More informationMANAGEMENT REVIEW FOR LABORATORIES AND INSPECTION BODIES
APLAC TC 003 MANAGEMENT REVIEW FOR LABORATORIES AND INSPECTION BODIES Issue No. 4 Issue Date: 09/10 Page 1 of 7 PURPOSE This document gives laboratories and inspection bodies guidance on how to establish
More informationExperis Gas Mixtures. When accuracy, stability and reliability are a must
Experis Gas Mixtures When accuracy, stability and reliability are a must Making the Difference For over 70 years, Air Products has enabled customers to become more productive, energy efficient and sustainable.
More informationOverview of ISO 17511 for 'Biologicals'
JCTLM Symposium on Reference Measurement Systems for Biologicals International Bureau of Weights and Measures Pavillon de Breteuil, Sèvres, FR 2004-12-15 Overview of ISO 17511 for 'Biologicals' R. Dybkaer
More informationWeight Calibration ComparatorPac TM Simple Calibration Efficient Workflow Reliable Results
Weight Calibration ComparatorPac TM Simple Calibration Efficient Workflow Reliable Results Safe and Simple Weight Calibration with ComparatorPac TM ComparatorPac Weight Calibration for Traceable Results
More informationRegulatory Requirements for Medical Device Calibration Programs
Regulatory Requirements for Medical Device Calibration Programs Dan O Leary CBA, CQA, CQE, CRE, SSBB, CIRM President Ombu Enterprises, LLC Dan@OmbuEnterprises.com www.ombuenterprises.com 603-209-0600 1
More informationCalibration Certificate
P.O. Box 87-0087 Phone:856-686-1600 Fax:856-686-1601 www.troemner.com e-mail: troemner@troemner.com SECTION 1: Page 1 of 7 Pages SECTION 2: APPROVED SIGNATORY Joseph Moran SECTION 3: PERSON PERFORMING
More informationEURAMET 1197 SUPPLEMENTARY BILATERAL COMPARISON OF HYDRAULIC GAUGE PRESSURE STANDARDS UP TO 50 MPa
Final Report of EURAMET 1197 SUPPLEMENTARY BILATERAL COMPARISON OF HYDRAULIC GAUGE PRESSURE STANDARDS UP TO 50 MPa Yasin DURGUT 1 Nenad PETROVSKI 2 Vanco KACARSKI 2 (1) National Metrology Institute (UME),
More informationQuality Management System Policy Manual
Quality Management System Burns Engineering, Inc. 10201 Bren Road East Minnetonka, MN 55343 4. 4.1 General Requirements The Quality Manual consists of the quality system policy documents and the quality
More informationGuidelines on the Reporting of Compliance with Specification
Guidelines on the Reporting of Compliance with Specification ILAC-G8:03/2009 Copyright ILAC 2009 ILAC encourages the authorized reproduction of this publication, or parts thereof, by organisations wishing
More informationGUIDANCE ILAC-G24 INTERNATIONAL OIML D 10 SERIES Edition 2007 (E) DOCUMENT Edition 2007 (E)
GUIDANCE ILAC-G24 INTERNATIONAL OIML D 10 SERIES Edition 2007 (E) DOCUMENT Edition 2007 (E) Guidelines for the determination of calibration intervals of measuring instruments Guide pour la détermination
More informationTECHNICAL NOTE: SI 01 SPECIFIC REQUIREMENTS FOR THE ACCREDITATION OF INSPECTION BODIES FOR SITE INVESTIGATION
ACCREDITATION SCHEME FOR INSPECTION BODIES TECHNICAL NOTE: SI 01 SPECIFIC REQUIREMENTS FOR THE ACCREDITATION OF INSPECTION BODIES FOR SITE INVESTIGATION Technical Note SI 01: 3 February 2016 The SAC Accreditation
More informationThe BIPM, the Time Department and UTC
The BIPM, the Time Department and UTC Elisa Felicitas Arias Fundamentals for a time and frequency laboratory BIPM, 11 September 2012 BUREAU INTERNATIONAL DES POIDS ET MESURES The BIPM It has headquarters
More informationEnhanced calibration High quality services from your global instrumentation partner
Products Solutions Services Enhanced calibration High quality services from your global instrumentation partner Services 2 Calibration One trusted advisor Get the best to meet all your critical application
More informationGeneral and statistical principles for certification of RM ISO Guide 35 and Guide 34
General and statistical principles for certification of RM ISO Guide 35 and Guide 34 / REDELAC International Seminar on RM / PT 17 November 2010 Dan Tholen,, M.S. Topics Role of reference materials in
More informationQuality Assurance (QA) & Quality Control (QC)
Quality Assurance (QA) & Quality Control (QC) In the laboratory Georges Ruta Water Quality Scientist City West Water 1 City West Water Water Supply & Sewerage Authority Melbourne Pop. >800,000 Area 580
More informationCertifying Reference Materials to ISO Guide 34
Certifying Reference Materials to ISO Guide 34 Gill Holcombe Head of Reference Materials Production Environmental Laboratory Quality Day 17 November 2011 4005 Outline LGC background Quality systems - ISO
More informationInternational time scales Atomic standards
International time scales Atomic standards E.F. Arias International Committee for GNSS, 2 nd Meeting Meeting of GNSS experts Bangalore, 5 September 2007 OUTLINE International coordination for metrology;
More informationGENERAL REQUIREMENTS FOR THE PROGRAMME OF REFERENCE MATERIAL CERTIFICATION IN SERIAL PRODUCTION
International Document OIML 1 st CD GENERAL REQUIREMENTS FOR THE PROGRAMME OF REFERENCE MATERIAL CERTIFICATION IN SERIAL PRODUCTION International Organization of Legal Metrology Contents 01 Scope 2 12
More informationThe BIPM key comparison database
The BIPM key comparison database Dr Claudine Thomas BIPM KCDB Coordinator The BIPM key comparison database The KCDB is a public-access website http://www.bipm.org/kcdb built up upon a number of databases
More informationISO17025 INTERPRETATION DOCUMENT FOR CEC TEST METHODS
COORDINATING EUROPEAN COUNCIL ISO17025 INTERPRETATION DOCUMENT FOR CEC TEST METHODS Prepared by CEC European Accreditation Uniformity Project COORDINATING EUROPEAN COUNCIL FOR THE DEVELOPMENT OF PERFORMANCE
More informationAccreditation according to ISO/IEC 17025 in Europe. Historic EA Europeing Accreditation Assessment Experience from Technical assessment
Accreditation according to ISO/IEC 17025 in Europe Historic EA Europeing Accreditation Assessment Experience from Technical assessment 1 In year 1803 the foots in Europe had a big differences, depending
More informationISO/IEC 17020 Inspection Standard Application Document
ISO/IEC 17020 Inspection Standard Application Document August 2015 Copyright National Association of Testing Authorities, Australia 2015 This publication is protected by copyright under the Commonwealth
More informationRECOMMENDATION. on the Evaluation of Quality Management System of National Metrology Institutes
EURO-ASIAN COOPERATION OF NATIONAL METROLOGICAL INSTITUTIONS COOMET ЕВРО-АЗИАТСКОЕ СОТРУДНИЧЕСТВО ГОСУДАРСТВЕННЫХ МЕТРОЛОГИЧЕСКИХ УЧРЕЖДЕНИЙ КООМЕТ Approved on the COOMET Quality Forum 25 th February 2002
More informationCalibration Service Selection Guide
Calibration Service Selection Guide Certification of Accreditation available for download at www.ricelake.com/accreditation. Answer Questions to determine the calibration service you need Need accredited*
More informationTITLE: Quality System Manual DOCUMENT NUMBER: QMS
1 of 19 BUSINESS PROCESS (BP) QUALITY MANAGEMENT SYS NAME SIGNATURE DATE PREPARED BY BILL ATKINSON SIGNATURE ON FILE 12/3/2014 APPROVALS DEPARTMENT NAME SIGNATURE DATE PRESIDENT DANNY ANGEL SIGNATURE ON
More informationCOPY. Revision History: Changes were made to reflect the current practice of only including the most recent changes in the revision history.
Revision History COPY The top row of this table shows the most recent changes to this controlled document. For previous revision history information, archived versions of this document are maintained by
More informationand Drug Administration/Office of Regulatory Affairs (FDA/ORA) laboratories.
Page 1 of 13 Sections Included in this Document and Change History 1. Purpose 2. Scope 3. Responsibilities 4. Background 5. References 6. Procedure/(6.C.4. added or electronically ) 7. Definitions 8. Records
More information1 For more information T: +1.847.664.1499 / E: DAP@ul.com / W: ul.com/dap
DATA ACCEPTANCE PROGRAM UL Client Test Data Program Investigations of products by UL typically involve the testing of product samples. While UL maintains extensive facilities for these purposes, customers
More informationNABL NATIONAL ACCREDITATION
NABL 160 NABL NATIONAL ACCREDITATION BOARD FOR TESTING AND CALIBRATION LABORATORIES GUIDE for PREPARING A QUALITY MANUAL ISSUE NO. : 05 AMENDMENT NO : 00 ISSUE DATE: 27.06.2012 AMENDMENT DATE: -- Amendment
More informationHow do I gain confidence in an Inspection Body? Do they need ISO 9001 certification or ISO/IEC 17020 accreditation?
What should I look for when I have an Inspection need? 3 How do I gain confidence in an 4 How can accreditation of the inspection body by an ILAC accreditation body member provide confidence? 6 How can
More informationOIML D 18 DOCUMENT. Edition 2008 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION
INTERNATIONAL DOCUMENT OIML D 18 Edition 2008 (E) The use of certified reference materials in fields covered by metrological control exercised by national services of legal metrology. Basic principles
More informationQuality Assurance Manual January 2008 Revision I Revision date of 01/17/13. Pi Tape Corporation. 344 North Vinewood St. Escondido CA 92029-1337 USA
Quality Assurance Manual January 2008 Revision I Revision date of 01/17/13 Pi Tape Corporation 344 North Vinewood St. Escondido CA 92029-1337 USA Phone # 760 746-9830 Fax # 760 746-9196 In conformance
More informationMeasuring equipment in a laboratory.
Measuring equipment in a laboratory. Laboratory and metrology are two words that practically do not function separately. They are integrally connected to measuring equipment for tests and measurements.
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK
code Location code Customers Sites locations: 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Calibration Centre Bolkiah Garrison BB3510 Negara Brunei Darussalam Contact: Mr Lim Tiong Thai Tel: +673-2-386475
More informationProcedures and General Requirements
NIST HB 150-2016 National Voluntary Laboratory Accreditation Program Procedures and General Requirements Warren R. Merkel Vanda R. White This publication is available free of charge from: http://dx.doi.org/10.6028/nist.hb.150-2016
More informationNRC Publications Archive Archives des publications du CNRC
NRC Publications Archive Archives des publications du CNRC Digital 3D Imaging and Modeling: A Metrological Approach Beraldin, Jean-Angelo Publisher s version / Version de l'éditeur: Time Compression Technologies
More informationIMQ RULES. Contents. IMQ Rules - Product certification
IMQ RULES PRODUCT CERTIFICATION "ELECTRIC ENERGY METERS AND METER UNITS" PRODUCT OF NEW MANUFACTURING Contents IMQ Rules - Product certification Particular Rules for the Electric energy meters and meter
More informationLegal Metrology and International Trade
International Trade Centre U N C T A D / W T O Export Quality Bulletin No.74 June 2004 Legal Metrology and International Trade Contents What is Metrology? Scope of legal metrology Understanding the requirements
More informationROLE OF THE APEC SPECIALIST REGIONAL BODIES
ROLE OF THE APEC SPECIALIST REGIONAL BODIES ND A S ARD URE D N STA TRUCT E H F T FRAS O S NT NCE IN E M ELE FORMA CON Why is the Standards and Conformance Infrastructure important? ~ Improves everyday
More informationQuality Management Systems for Seed Testing Laboratories: Presented to the 2010 CSAAC Meeting. Valerie Martz Senior Laboratory Accreditation Officer
Quality Management Systems for Seed Testing Laboratories: Presented to the 2010 CSAAC Meeting Valerie Martz Senior Laboratory Accreditation Officer Outline 1. Quality Management Systems (QMS): Generic
More informationQuality Assurance/Quality Control in Acid Deposition Monitoring
Quality Assurance/Quality Control in Acid Deposition Monitoring Acid Deposition and Oxidant Research Center (Network Center of EANET) Introduction Wet deposition data are used for -assessments of spatial
More informationEA IAF/ILAC Guidance. on the Application of ISO/IEC 17020:1998
Publication Reference EA IAF/ILAC-A4: 2004 EA IAF/ILAC Guidance on the Application of ISO/IEC 17020:1998 PURPOSE This guidance document is for ISO/IEC 17020: General Criteria for the operation of various
More informationAS/NZS 4801:2001. Safety Management Systems (SMS) Self-Assessment Checklist. Revision 1 (January 2014)
AS/NZS 4801:2001 Safety Management Systems (SMS) Self-Assessment Checklist This document restates the requirements of AS/NZS 4801:2001 for Safety Management Systems (SMS) and has been developed to assist
More informationPolicy on Monitoring of Stack Emissions to Air at EPA Licensed Sites
Policy on Monitoring of Stack Emissions to Air at EPA Licensed Sites 1. OVERVIEW In Ireland at present there are no mandatory minimum criteria specified in relation to the completion of stationary source
More informationTerminology in Analytical Measurement Introduction to VIM 3
Terminology in Analytical Measurement Introduction to VIM 3 First Edition 2011 Terminology in Analytical Measurement Introduction to VIM 3 First Edition 2011 Editors Vicki Barwick (LGC, UK) Elizabeth
More informationR103 - GENERAL REQUIREMENTS: PROFICIENCY TESTING FOR ISO/IEC 17025 LABORATORIES
Page 1 of 7 R103 - GENERAL REQUIREMENTS: PROFICIENCY TESTING FOR ISO/IEC 17025 November 2009 2009 by A2LA All rights reserved. No part of this document may be reproduced in any form or by any means without
More informationThere is a need for a coordinating role by the Commission supported by the Framework programme, to facilitate and harmonise those developments.
0(752/2*
More informationcalibrate confidence with Metrology Concepts: Understanding Test Uncertainty Ratio (TUR) Abstract Introduction White Paper
calibrate with confidence White Paper Metrology Concepts: Understanding Test Uncertainty Ratio (TUR) Authored by Keith Bennett Director of Metrology Howard Zion Director of Technical Operations TRANSCAT
More informationState Meat and Poultry Inspection (MPI) Program Laboratory Quality Management System Checklist
This checklist is intended to help laboratories improve the quality of their testing programs with regard to meat and poultry testing samples, in order to ensure those laboratories are at least equal to
More informationALACC Frequently Asked Questions (FAQs)
Updated October 17, 2012 ALACC Contents Web Introduction to FAQ... 2 FAQ #6... 3 ALACC Section: How to Meet ISO 17025 Requirements for Method Verification (Page 9)... 3 FAQ #13... 4 ALACC Section ALACC
More informationQuantifying Uncertainty in Analytical Measurement
EURACHEM / CITAC Guide Quantifying Uncertainty in Analytical Measurement Second Edition QUAM:000.P1 EURACHEM/CITAC Guide Quantifying Uncertainty in Analytical Measurement Second Edition Editors S L R Ellison
More informationPerformance and Approvals Testing - ISO/IEC 17025 Application Document
Performance and Approvals Testing - ISO/IEC 17025 Application Document March 2013 Copyright National Association of Testing Authorities, Australia 2013 This publication is protected by copyright under
More informationNVLAP Assessor Training. Assessor Qualification & Training Requirements
NVLAP Assessor Training Assessor Qualification & Training Requirements References ISO/IEC 17011: Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies
More informationOH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable)
OH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable) 4.1 General Requirements 4.2 OHS policy Has the organisation an established and maintained
More informationConfidence. Convenience flexibility
Confidence. Convenience flexibility Essential Support Plans: Priority Response Preventative Maintenance Continuous Support Essential Support Plans Our Essential Support Plans give you confidence that your
More informationCALIBRATION PRINCIPLES
1 CALIBRATION PRINCIPLES After completing this chapter, you should be able to: Define key terms relating to calibration and interpret the meaning of each. Understand traceability requirements and how they
More informationNon-Controlled Copy. Quality Manual Revision Log. Rev # Date Description
Quality Manual Revision Log Rev # Date Description 1 Oct 1984 Original Document. 2 Aug 1986 Document Hillsboro Move. Complete Revision. 3 May 1988 Incorporate/Beaverton Move. Reformat to Word Perfect 4.0.
More informationNational Measurement Institute Service Charter
Message from the Chief Executive National Measurement Institute Service Charter This Service Charter is a commitment about the service that the National Measurement Institute (NMI) will provide when you
More informationCALIBRATION DATA MANAGEMENT: MEETING THE REPORTING REQUIREMENTS OF ISO/IEC FDIS 17025.
CALIBRATION DATA MANAGEMENT: MEETING THE REPORTING REQUIREMENTS OF ISO/IEC FDIS 17025. Nicholas Mason Metrology Software Project Manager Calibration Group, Fluke Corporation 6920 Seaway Blvd. Everett,
More informationISO/IEC 17025 QUALITY MANUAL
1800 NW 169 th Pl, Beaverton, OR 97006 Revision F Date: 9/18/06 PAGE 1 OF 18 TABLE OF CONTENTS Quality Manual Section Applicable ISO/IEC 17025:2005 clause(s) Page Quality Policy 4.2.2 3 Introduction 4
More informationInfo 15:2 TRAINING 2015/2016. Info 13:19
Info 15:2 TRAINING 2015/2016 Info 13:19 1 2 Info 13:19 S WELCOME TO SWEDAC ACADEMY... 4 TRAINING PROGRAM AND COURSES 2015/2016... 7 1. HOW TO RUN AN ACCREDITATION BODY ISO/IEC 17011... 7 2. LEAD ASSESSOR
More informationCalibration of Electronic Test Equipment: An Introduction to ISO 17025 & Accreditation
Calibration of Electronic Test Equipment: An Introduction to ISO 17025 & Accreditation Presentation s Objectives What does Calibration mean? What is ISO 17025, what is Accreditation, and what is the difference?
More informationMemorandum of Understanding
Memorandum of Understanding between Department for Business, Innovation and Skills and United Kingdom Accreditation Service Page 1 of 13 Contents 1 Purpose... 3 2 Background... 3 3 Scope of activity...
More informationCalibration & Preventative Maintenance. Sally Wolfgang Manager, Quality Operations Merck & Co., Inc.
Calibration & Preventative Maintenance Sally Wolfgang Manager, Quality Operations Merck & Co., Inc. Calibration: A comparison of two instruments or measuring devices one of which is a standard of known
More informationMeasuring instruments in industry.
Measuring instruments in industry. Measuring instruments that are present in any branch of industry, are subject to different levels of supervision, like in case of laboratories. Supervision relates to
More informationA NEW ALGORITHM FOR CLOCK WEIGHTS FOR THE SIM TIME SCALE
Simposio de Metrología 202 8-2 de Octubre, 202 A NEW ALGORITHM FOR CLOCK WEIGHTS FOR THE SIM TIME SCALE 2 J. M. López R, M.A. Lombardi, N. Diaz, E. de Carlos L. División de Tiempo y Frecuencia, Centro
More informationEuropean cooperation for EAL-G23 THE EXPRESSION OF UNCERTAINTY IN QUANTITATIVE TESTING. The Expression of Uncertainty in Quantitative Testing
European cooperation for EAL-G23 THE EXPRESSION OF UNCERTAINTY IN QUANTITATIVE TESTING Accreditation of Laboratories Publication Reference EAL-G23 The Expression of Uncertainty in Quantitative Testing
More informationSTANDARD OPERATING GUIDELINES: EVIDENTIAL BREATH ALCOHOL INSTRUMENT CALIBRATION
Directive from the Scientific Director Page 1 of 16 STANDARD OPERATING GUIDELINES: EVIDENTIAL BREATH ALCOHOL INSTRUMENT CALIBRATION 1 Scope To describe the procedure for breath alcohol instrument calibration
More informationMetrology, Quality and ISO 9000
Metrology, Quality and ISO 9000 Application Note What is ISO 9000 is becoming the internationally recognized model for the development of a documented quality system. A quality system is the organizational
More informationNIST HANDBOOK 150-5 CHECKLIST CONSTRUCTION MATERIALS TESTING
NIST HANDBOOK 150-5 CHECKLIST CONSTRUCTION MATERIALS TESTING Instructions to the Assessor: This checklist addresses specific accreditation criteria prescribed in NIST Handbook 150-5, Construction Materials
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 7 Contact: Mr S C Sparks Solent Industrial Estate Tel: +44 (0)1489 790296 Hedge End Fax: +44 (0)1489 790294 Southampton E-Mail: info@southcal.co.uk
More informationGMP 11. Good Measurement Practice for Assignment and Adjustment of Calibration Intervals for Laboratory Standards
March 2003 GMP 11 Good Measurement Practice for Assignment and Adjustment of Calibration Intervals for Laboratory Standards 1. Introduction 1.1. Purpose Measurement processes are dynamic systems and often
More informationJCGM 106:2012. Evaluation of measurement data The role of measurement uncertainty in conformity assessment
Evaluation of measurement data The role of measurement uncertainty in conformity assessment Évaluation des données de mesure Le rôle de l incertitude de mesure dans l évaluation de la conformité October
More informationChecklist. Standard for Medical Laboratory
Checklist Standard for Medical Laboratory Name of hospital..name of Laboratory..... Name. Position / Title...... DD/MM/YY.Revision... 1. Organization and Management 1. Laboratory shall have the organizational
More informationSoftware Verification and Validation
Software Verification and Validation Georgia L. Harris Carol Hockert NIST Office of Weights and Measures 1 Learning Objectives After this session, using resources and references provided, you will be able
More informationForm and content of COOMET сertificate for reference materials for composition and properties of substances and materials
COOMET Recommendation Form and content of COOMET сertificate for reference materials for composition and properties of substances and materials CООМЕТ R/RM/22:2013 Agreed at the 17 th meeting of COOMET
More informationISO/IEC 17020 ACCREDITATION REQUIREMENTS FOR FORENSIC INSPECTION BODIES
ISO/IEC 17020 ACCREDITATION REQUIREMENTS FOR FORENSIC INSPECTION BODIES AUTHORITY: VICE PRESIDENT EFFECTIVE DATE: 2015/02/02 DOCUMENT NUMBER: MA 3012 TABLE OF CONTENTS Foreword... 3 1. Application... 4
More informationTHERMAL INSULATION MATERIALS
NIST HANDBOOK 150-15 2006 Edition National Voluntary Laboratory Accreditation Program THERMAL INSULATION MATERIALS Lawrence I. Knab National Voluntary Laboratory Accreditation Program Standards Services
More informationCOMBINE. Part B. Manual for Marine Monitoring in the. Programme of HELCOM. General guidelines on quality assurance for monitoring in the Baltic Sea
Manual for Marine Monitoring in the COMBINE Programme of HELCOM Part B General guidelines on quality assurance for monitoring in the Baltic Sea Annex B-3 Quality audit ANNEX B-3 QUALITY AUDIT 1. Objectives
More informationRTP s NUCLEAR QUALITY ASSURANCE PROGRAM
RTP s NUCLEAR QUALITY ASSURANCE PROGRAM RTP operates under one quality program, whether you purchase products that are commercial grade, nuclear safety-related or industrial safety compliant (IEC 61508).
More informationCRM s and the Dilemma of the 2nd Source. Shawn Kassner, Sr Product Manager Tim Miller, Sr Organic Chemist Phenova, A Phenomenex Company
CRM s and the Dilemma of the 2nd Source Shawn Kassner, Sr Product Manager Tim Miller, Sr Organic Chemist Phenova, A Phenomenex Company What are we talking about? ISO 17025 requirements for labs and CRM
More informationP07 CALA Application of Requirements in ISO/IEC 17025:2005 Revision 3.4 April 9, 2014
P07 CALA Application of Requirements in ISO/IEC 17025:2005 Revision 3.4 April 9, 2014 1 TABLE OF CONTENTS FOREWORD... 1 1.0 SCOPE... 1 1.5 Safety Requirements... 1 4.0 MANAGEMENT REQUIREMENTS... 1 4.1
More informationCalibration. How can you get lower costs for the calibration? What is traceability? What is measurement uncertainty? What is calibration?
Calibration Tvinnargatan 25 SE-507 30 Brämhult SWEDEN Phone: +46 33 22 56 30 Fax: +46 33 13 88 71 info@kalibrera.se www.kalibrera.se In May 2011 Elastocon purchased the company Mätcentrum in Eskilstuna,
More informationS Davidson, M Perkin, M Buckley
No. 71 Measurement Good Practice Guide The Measurement of Mass and Weight S Davidson, M Perkin, M Buckley The National Physical Laboratory is operated on behalf of the DTI by NPL Management Limited, a
More informationDerbyshire Trading Standards Service Quality Manual
Derbyshire Trading Standards Service Quality Manual This Quality Manual has been developed to give a broad outline of how the Trading Standards Division s range of services comply with the requirements
More information