Mobile Power Bank Specification 移 动 电 源 规 格 书

Transcription

1 Mobile Power Bank Specification 移 动 电 源 规 格 书 Model #: ASP-9006 A&S P/N: AS-PBANK S Capacity/ 容 量 : mAh 00mAh Voltage/ 电 压 :5.0V Registered Checked Approved 编 制 审 核 批 准 Mike Sun Alex Chan David Zhu Dept. 部 门 QA Dept 品 质 R&D Dept 研 发 Approved 批 准 Customer Approve 客 户 确 认 Signature 签 名 Date 日 期 Tel: Fax: /6

2 1. SCOPE This specification is applied to the reference mobile power bank in this Specification and manufactured by A&S Power Technology Co., Ltd. 2. INTRODUCTION Model: ASP-9006 Size 73x 120 x 11.2mm 2.88 x 4.72 x 0.44 inch Weight 86g 3.03 oz Color Case Input Output Black/Blue/Yellow/Red/White ABS 4.7-6V/ mAh 00mAh 5V/ mAh For purchasing A&S Power Solar ASP-9006 This aims to provide detailed operation Tel: Fax: /6 sales@aspowerbattery.com

3 instructions and cautions so as to command the operation Please carefully read the information and follow all instructions thoroughly before product. Manual provides operation instructions for A&S Power Solar ASP-9006which is rechargeable solar power bank with solar panel input and 5V USB input & output and product for powering and charging almost all kinds of 5V portable devices such iphone, mobile phones, MP3 /MP4 players, digital camera, PDA, PSP, NDS, GPS, camcorder, pico projector and bluetooth headset...etc. Via 5V USB charging cable. Power bank is a kind of revolutionary product that can charge via solar power energy provide power for a wide range of portable electronic devices anywhere anytime. Pledges to take the responsibility of warranty of our products. However, the damage results from the incorrect operation or repairing would beyond our responsibility. 3. SAFETY PRECAUTIONS Product has been designed and manufactured to assure personal safety. read the following carefully before using the product. Incorrect operation or incompatibility with your device may result in reduced battery performance or damage device. The voltage of your device for correct compatibility with the product. attempt to disassemble the product. and operate between 32 F-113 F. Keep the product away from any heat sources. Temperatures over 60 degree may cause damage. product dry and away from water. Do not contact this product with liquids. drop, throw, impact or shake the product. operate the product if it has been subjected to shock or damage. solder, crush or puncture the product. Recharge the product every 3 months when not in use. Use soft cloth to clean the Do not use harsh chemicals or strong cleaning solvents. keep the product out of the reach of babies and small children, in order to avoid dangerous situation happened. Tel: Fax: /6 sales@aspowerbattery.com

4 4. PACKAGE CONTENTS (1) DC Input Port: DC Input port, 5.0V 3c (2) DC Output Port: USB Output port, 5.0V (3) LED indicator: Being charged via DC input port or solar panel a --- LED on: Being charged via DC input port b --- LED: N/A c --- LED on: Being charged via solar panel 5. CHARGING ASP-9006 Important: Always Charge your ASP-9006the FIRST time for a full 8 hours use. After the initial charge, normal charging will only take 2-3 hours afterwards. There are Four kinds of charging ways for your reference: 1). Use Desktop Computer or Laptop Computer to charge ASP-9006 Connect the USB port of the computer and DC port of ASP-9006with USB cable. After connection, the LED indicator is ON that shows ASP-9006is by the computer. When finishing charging, the LED indicator will turn OFF. 2). Use optional USB to AC V US/EU/UK Adapter to charge ASP-9006 Connect the USB port of the AC adapter and DC port of ASP-9006with USB cable. After connection, the LED indicator is ON that shows ASP-9006is by the USB to AC adapter. 3). Use optional USB to DC 12-24V Car Adapter. Connect the USB port of the Car adapter and DC port of ASP-9006with cable. After connection, the LED indicator is ON that shows ASP-9006is by the USB to Car adapter. 4). Auto-charging by either full sunny light or indoor bright light via built-in solar Tel: Fax: /6 sales@aspowerbattery.com

5 6. CHARGING DEVICES Important: Please check for voltage compatibility with your device first. A. Insert USB charging cable into the USB Output port of ASP-9006 B. Choose the suitable tip for your portable electronics device. C. Insert the correct tip to the end of USB charging cable and connect the tip charging port (power input) of your device. D. When the LED indicator is ON, it means that the device is being charged E. When finishing charging, the LED indicator will turn OFF automatically. F. Remove the tip from the device, then you can resume using the device for *For other electronic devices, it s similar to the above procedure. 7. SPECIFICATION Battery Cell: Lithium-Polymer Power Capacity: Rated Input: DC 5.0V/ 500mA Rated Output: USB 5.0V/ 1000mA Self-Charging time: (A) Through Solar Panel: Solar Panel (Mono-Crystalline Silicon): 5.5V/80mA 19-24hours (Under full sunlight conditions) (B) Through DC input port: 2-3 hours 8. Period of Warranty The period of warranty is two years from the date of shipment. A&S Power guarantees to give a replacement in case of cells with defects proven due to manufacturing process instead of the customers abuse and misuse. 9. Amendment of this Specification This specification is subject to change with prior notice. Tel: Fax: /6 sales@aspowerbattery.com

6 Reference Photo of ASP End- Tel: Fax: /6