Recessed wall lights

Transcription

1 technology THE ART OF IGHTING A Oslo2SQ W WW amptype: recessed walllight Housing: solid Aluminium white powdercoated RA9003 Dimensions fixture: 55 x 55 x 40 mm Fixture Classification: IP44 (indoor rated) Class III Operating Power: constant current 700mA Excluded (external) driver Power: 3.3W 27m 3000K CRI: 80 Forward Voltage: 3VDCAdvised drivers: 700mA (dimmable or non dimmable) Vf 700mA 3 COB excluded Always disconnect the mains of the driver before plugging or unplugging the `s!! The `s will be damaged or destroyed because of the high voltage present on the driver output when there is no load connected. Connect the main after all ed`s and plugs are connected! Intensity(unit:cd) C Intensity(unit:cd)C0180 av(50%)=23.5 θ Dimensions in mm Height Oslo2SQ WW 23.5 Øm Avg. Nadir.E 50 fixture inclusiv: / 40cm mounted cable one side open end 0.5m 1.0m 0.21m 0.42m 22 x 5.55 x 20 x 4.89 x m 2.0m 0.62m 2.47 x 0.83m 1.39 x 2.17 x 1.22 x 2 2.5m 1.04m 1.01 x 0.88 x m 1.25m 0.62 x 0.54 x 44 INDOOR RATED Recessed wall lights

2 A Non dimmable Driver Dipswitch for selection output currency Set to 700mA: Switch 5 & 6 to ON V AC N A VAUX PRI SEC N ON SEC PRI A Constant current Driver Constant current must be set to 700mA Set microswitches 5 6 to 700mA 25W / Vf: 700mA 25W / Vf: 271 oad max. 6x Oslo2 to the driver To avoid damages to the, B Dimmable by A Dimmable by Triac dimmer (leading edge or trailing edge) V AC N A Dimmable driver Constant current 700mA max. 18W eading or trailing edge dimmable (Dimmable by TRIAC Dimmer) Technical Specifications: Primair: V AC Power Factor: 90 Sec: constant current 700mA Vf: 626 Overheat, overload & short circuit protection safe no load protection Dimming Range: 1100% Easy press cable lock Working Temperature: 20 ~ 50 C Tc = 90 C Housing: Blue ABS Dimensions in mm: 113 x 44 x 28 Weight: 0.1 Kg Classification: IP20 Class II oad max. 5x Oslo2 to the driver To avoid damages to the,

3 1 C Dimmable by A & pulse switch A Constant current Driver Constant current must be set to 700mA Set microswitches 5 6 to 700mA 25W / Vf: 700mA 15W / Vf: 228 Dipswitch for selection output currency Set to 700mA: Switch 5 & 6 to ON ON Driver A SYNC SEC 110V PUSH PRI N V AC N Pulse Switch: Short push to turn ON and OFF Push and hold to increase or decrease light intensity A Synchronise conectioncable to connect the next driver Max 10 drivers can be connected and controlled by one Pulse Switch oad max 7x Oslo () to this driver To avoid damages to the, D 110V Dimmable by Rotary Dimmer 1Channel 110VControl (Jung 24010) N VAC ~ 010V 1 group mA each: 255Vf output NTC 1Channel 110VDriver ToolboxPro (connection) NTC (connection) A Eldo SoloDrive30W S0361 A Dimmable 110V constant current driver max. 30W Constant Current output is standart set to 350mA (For 700mA or other settings, the toolbox A is required) oad max 7x Oslo to the 30W driver To avoid damages to the,

4 E Dimmable with Eldo 3channel Driver and DMXcontroller A Eldo PowerDrive50W (PWR0562 A1) 3 separately Dimmable outputs controllable by 3 DMXAdresses! ToolboxPro (connection) NTC (connection) DMX Control GND ART8D DMXControl Dimming each group separatly and creating 8 dimming scenes IRControl The constant current output is standart set to 350mA For other settings, the toolbox Pro A is required N VAC 24VDC Power Supply oad total max. 24 Oslo2 WW to one PowerDrive50W. oad max. 4x Oslo2 WW () to one outputchannel. To avoid damages to the,

5 F Dimmable with Eldo 4channel Driver standalone controlled or by DMX, DAI or 010V GND DMX Control ART8D DMXControl Dimming each group separatly and creating 8 dimming scenes A Eldo PowerDrive100W (PWR16 A1) 4 separately Dimmable outputs controllable by 4 DMX or DAI Adresses or 110V The constant current output is standart set to 350mA and must be set to 700mA All settings, can be changed by 3 buttons (M ) below the CD The PowerDrive100 can be set to different controlmodes; MODE settings VAC N Sync GND GND 24VDC Power Supply 4 groups set to 700mA each: max.55vf IRControl 1 DMXChannel: Fader1 controlls all s 2 DMXChannels: Fader1 controlls group 1 & 2 Fader2 controlls group 3 & 4 4 DMXChannels: Fader1 controlls group 1 Fader2 controlls group 2 Fader3 controlls group 3 Fader4 controlls group 4 DAI Ext in NTC (connection) channel4 load max. 6x Oslo2 channel4 load max. 6x Oslo2 channel4 load max. 6x Oslo2 channel4 load max. 6x Oslo2 oad total max. 24 Oslo2 WW to one PowerDrive100W. oad max. 6x Oslo2 WW () to one outputchannel. To avoid damages to the,

6 G Dimmable with Eldo PowerDrive 6060R 32 outputs A Eldo PowerDrive600W PW6060R constant current driver max.600w Dimmable by 010V, Dimmable by DAI (4x DAI group) Dimmable by DMX & RDM (32x DMX channel) Standalone with 9 default shows, up to 20 userdefined shows, uploadable with TOObox and TOObox software Constant Current output is standart set to 350mA Connecting the Oslo2WW, it must be set to 700mA Universal input Voltage: 120V~277V 50/60Hz ed outputs: 32x 200mA1050mA Power factor: > 0.9 min/max forward Voltage: 32x 248VDC Depth: 329mm / Full dimming control: 100% to 0%, Choice of linear or logarithmic dimming curve Maximum (rated) power available over wide voltage (3055V) range NTC interface per 4 outputs for robust thermal management Dimensions x W x H (mm): 482.6(19")x324x44.5(1HE) Weight: 6.1 Kg Worldwide Certifications: CE, IEC 61347, IEC 62384, EN 55015, EN 55022, IEC , IEC U: pending 30.0 mm 1.18 ø 5.0 mm / mm / M mm / mm V DMX 2x RJ45 (CAD5) orange/white = DMX orange = DMX Broun/white = GND (shield) outputs DMX DAI IN 010V IN IN OUT The Powerdrive600 has 32 Outputchannels Use 1 outputchannels to connect () 4x Oslo2 WW oad total max. 128 Oslo2 WW to one driver. To avoid damages to the, oad total max. 128 Oslo2 WW to one PowerDrive 600W. oad max. 4x Oslo2 WW () to one outputchannel. To avoid damages to the,