Industrial Electronics Technician

Size: px
Start display at page:

Download "Industrial Electronics Technician"

Transcription

1 Industrial Electronics Technician The candidate applying to be trade tested for the Certificate of Competence should be in possession of the majority of the following knowledge, competencies & skills: Verbal technical communication Written communication Handover on equipment intervention Written report on machine performance Request for spare parts Use of software packages Circuit design Equipment on board diagnostic Exposure to preventive maintenance culture Safety Awareness On site general safety Machine operation safety Machine intervention safety Awareness and use of Personal Protection equipment Fault finding and rectification: Use of manuals and circuit diagrams to: Comprehend diagram Follow diagram Identify components on board

2 Use of basic test intruments Oscilloscope Multimeter Function generator What signals / readings are expected Board Repair Soldering and replacing components ESD awareness during repair Pneumatics Comprehend association of electronic component (control) and pneumatic actuators (movement) Exposure of different equipment using pneumatics Use / replacement of pneumatic components Pistons, cylinders, regulators Use / replacement of electronic components Sensors, input / output modules Exposure to industrial equipment Machine operation Use of embedded diagnostic tools Identification of modules CPU Input / Output modules Motors Servo drives Controllers ADC / DAC Sensor capacitive, inductive, pressure, temperature Diagnostic to identify faulty modules Replacement of faulty modules

3 PLC / PC based systems Types of PLC / PC based industrial equipment Exposure to ladder diagram / mc software Software backups Use of networking within equipment

4 ASSESSMENT CRITERIA Trade Testing Board Assessment Criteria- Industrial Electronics Technician 1. Introduction The following is a detailed description of the assessment criteria to be adopted by the Trade Testing Board (TTB) to reach a final decision on the award of the Certificate of Competence. Trade Test As defined in the Standard Operating Procedure, the trade test is to be made up of the following components: 1. The Interview 2. Portfolio/Logbooks 3. Written Test 4. Practical Test and on-site Verification of Work Experience 5.

5 Component Mark Pass Mark Interview % Portfolio/Logbooks % Written Test % Practical Test and Verification of Work Experience % The Board agreed on the sequence of the tests and the marking scheme allocated to each specific component as indicated above.

6 The Written Component The Board agrees that the theoretical written test is mandatory. The syllabus, on which the written component will be based, will be that which is currently being used by MCAST for the award of the Diploma in Industrial Electronics.

7 The Interview Component All candidates will be called for an interview so that the Board will be able to assess the proficiency of the candidate in this particular field. The duration of the interview will be not less than 30 minutes but not exceeding 45 minutes. During the interview, the Board will have the opportunity to put forward any question related to: Behaviour Aptitude Experience Skills and knowledge Health & Safety Practices Quality in work performance Communication abilities Logbooks/Portfolios Vision for their future. The Board believes that all candidates should answer questions on the above topics with confidence while portraying technical skills and knowledge on the subject.

8 The Practical Component This component will be conducted in the form of a TEST, divided into two separate sessions of about two hours each. Separate and different tests are conducted to the candidates - those who are employed in the field of Industrial who are NOT employed in this sector. Electronics and those Candidates employed in the field of Industrial Electronics Session 1 - will serve as a prelude to the second session, which is the actual Verification of Work Experience. This will consist of an open book practical test where, the candidate will have to demonstrate the following abilities to: - understand the theoretical components/modules in use - source and interpret technical data and apply/use it - analyse a situation in a systematic and logical manner - perform the necessary repair and/or modification - use the appropriate tools and testing equipment Session 2 - will be the actual Practical Test that will be conducted at the candidate s place of work. The Trade Testing Board will carry out an inspection at the candidate s workplace to monitor, evaluate and verify the work experience of the applicant in Industrial Electronics. The Board will examine whether the candidate s technical knowledge, abilities and skills of the work performed are of the required standard.

9 Candidates NOT employed in the field of Industrial Electronics Candidates not employed in the field of Industrial Electronics during the period of trade testing, will have the following Practical Test: Session 1 the candidate will have to show his/her ability to: - interpret and understand technical circuit diagrams, schematics and mechanical blueprints. - analyse datasheets and/or specification sheets - choose the appropriate component/s for a specific task/s. - explain how to test and troubleshoot an electronic circuit/s - prepare a technical plan for Session 2 Session 2 This will be the actual Practical Test and the candidate will have to show his/her ability to: - construct, operate and test an analogue and/or a digital circuit. - carry out fault-finding procedures on an analogue and/or a digital module - use a simulation package to convert an electronic circuit diagram into a printed circuit board.

10 Portfolio Applicants who are not in possession of the logbooks, are to submit a Portfolio. This portfolio enables the candidate to: Identify and demonstrate what he/she have done and what he/she can do Highlight his/her employability skills as well as his/her technical skills Transfer competences and knowledge gained in the past to present and future settings Establish a personal record of his/her learning beyond his/her qualifications The portfolio shall include: Evidence of knowledge and abilities Work samples Skills Inventory References from current and previous employers Special Projects The portfolio shall serve as a reflection of the candidate.

Occupational Profile: Electrical & Electronics Engineering Technician

Occupational Profile: Electrical & Electronics Engineering Technician Occupational Profile: Electrical & Electronics Engineering Technician A competent Electrical & Electronics Engineering Technician should be able to demonstrate the following skills and competences: 1.

More information

Electrical Fitter. A competent Electrical Fitter is expected to:

Electrical Fitter. A competent Electrical Fitter is expected to: Electrical Fitter A competent Electrical Fitter is expected to: 1. Work safely in teams and apply interpersonal skills in electrical engineering 2. Identify risks arising from electrical engineering activities

More information

Release: 1. AURT575393A Analyse and evaluate electrical and electronic faults in transmission/driveline systems

Release: 1. AURT575393A Analyse and evaluate electrical and electronic faults in transmission/driveline systems Release: 1 AURT575393A Analyse and evaluate electrical and electronic faults in transmission/driveline systems AURT575393A Analyse and evaluate electrical and electronic faults in transmission/driveline

More information

Bosch Packaging Academy Essential Training

Bosch Packaging Academy Essential Training Essential Training Operating Fundamentals Work safely during operation Understand the basic functions of the equipment Get familiar with the operating elements Be able to operate the equipment Get familiar

More information

GIORGI-FERMI vocational school. Knowledge and skills to be acquired by the student/trainee during his training

GIORGI-FERMI vocational school. Knowledge and skills to be acquired by the student/trainee during his training GIORGI-FERMI vocational school Knowledge and skills to be acquired by the student/trainee during his training Electrical course Electrical circuits and networks Programmable Logic Controller PLC (Siemens)

More information

Mechanical Engineering Technician- Plant Technician

Mechanical Engineering Technician- Plant Technician Mechanical Engineering Technician- Plant Technician A competent Mechanical Engineering Technician- Plant Maintenance is expected to: 1. Ability to plan and execute work in a safe and responsible manner

More information

Trainee Instrumentation / Electronics Engineering Technician. Technical Manager / Technical Supervisor

Trainee Instrumentation / Electronics Engineering Technician. Technical Manager / Technical Supervisor Job Description Job title: Department: Responsible to: Location: Trainee Instrumentation / Electronics Engineering Technician Faculty of Engineering & Design Technical Manager / Technical Supervisor Faculty

More information

Electronics Technology

Electronics Technology Teacher Assessment Blueprint Electronics Technology Test Code: 5907 / Version: 01 Copyright 2011 NOCTI. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information

More information

Electrical/Electronics Technology Diploma

Electrical/Electronics Technology Diploma D 35 22 0 Electrical/Electronics Technology Diploma Concentration Overview The Electrical/Electronics Technology curriculum is designed to provide training for persons interested in the installation and

More information

CIM Computer Integrated Manufacturing

CIM Computer Integrated Manufacturing INDEX CIM IN BASIC CONFIGURATION CIM IN ADVANCED CONFIGURATION CIM IN COMPLETE CONFIGURATION DL CIM A DL CIM B DL CIM C DL CIM C DL CIM B DL CIM A Computer Integrated Manufacturing (CIM) is a method of

More information

EUROPASS DIPLOMA SUPPLEMENT

EUROPASS DIPLOMA SUPPLEMENT EUROPASS DIPLOMA SUPPLEMENT TITLE OF THE DIPLOMA (ES) Técnico Superior en Automatización y Robótica Industrial TRANSLATED TITLE OF THE DIPLOMA (EN) (1) Higher Technician in Industrial Automation and Robotics

More information

Robotics Technology COURSE OUTLINE

Robotics Technology COURSE OUTLINE Robotics COURSE OUTLINE 1. Course Title: Robotics 2. CBEDS Title: Robotics 3. CBEDS Number: 5612 4. Job Titles: Instrumentation Technician Fieldbus Software Engineer Controls Engineer Controls Programmer

More information

T146 Electro Mechanical Engineering Technician MTCU Code 51021 Program Learning Outcomes

T146 Electro Mechanical Engineering Technician MTCU Code 51021 Program Learning Outcomes T146 Electro Mechanical Engineering Technician MTCU Code 51021 Program Learning Outcomes Synopsis of the Vocational Learning Outcomes* The graduate has reliably demonstrated the ability to: 1. fabricate

More information

Revision Number: 1. CUFBRT402A Maintain broadcast equipment and facilities

Revision Number: 1. CUFBRT402A Maintain broadcast equipment and facilities Revision Number: 1 CUFBRT402A Maintain broadcast equipment and facilities CUFBRT402A Maintain broadcast equipment and facilities Modification History Not applicable. Unit Descriptor Unit descriptor This

More information

EUROPASS DIPLOMA SUPPLEMENT

EUROPASS DIPLOMA SUPPLEMENT EUROPASS DIPLOMA SUPPLEMENT TITLE OF THE DIPLOMA (ES) Técnico Superior en Mecatrónica Industrial TRANSLATED TITLE OF THE DIPLOMA (EN) (1) Higher Technician in Industrial Mechatronics ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

More information

Electronics Technology

Electronics Technology Job Ready Assessment Blueprint Electronics Technology Test Code: 4035 / Version: 01 Copyright 2010. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information

More information

MECE 102 Mechatronics Engineering Orientation

MECE 102 Mechatronics Engineering Orientation MECE 102 Mechatronics Engineering Orientation Mechatronic System Components Associate Prof. Dr. of Mechatronics Engineering Çankaya University Compulsory Course in Mechatronics Engineering Credits (2/0/2)

More information

Learning Systems Modular Systems for Mechatronics Training

Learning Systems Modular Systems for Mechatronics Training Learning Systems Modular Systems for Mechatronics Training MPS Modular Production System Model industrial automation systems at various levels of complexity MPS Combinations Model specific combinations

More information

Michelin North America

Michelin North America www.centecinc.com SC Telephone: 864.527.7750 Outside SC: 800.227.0855 Michelin North America Industrial Maintenance Technical Interview Outline Industrial Maintenance Technical Interview Outline The Technical

More information

Technical Training Module ( 30 Days)

Technical Training Module ( 30 Days) Annexure - I Technical Training Module ( 30 Days) Section 1 : Programmable Logic Controller (PLC) 1. Introduction to Programmable Logic Controller - A Brief History, Need and advantages of PLC, PLC configuration,

More information

Refrigeration & Air-conditioning Technician

Refrigeration & Air-conditioning Technician Refrigeration & Air-conditioning Technician A competent Refrigeration & Air-conditioning Technician is expected to: 1. Make use of best practice principles based on theory and experience gained throughout

More information

November 3 14, 2014 Tri-State Area of Kentucky, Ohio, Indiana Orientation Courses for Advanced Manufacturing. Focus Workforce Skills Development

November 3 14, 2014 Tri-State Area of Kentucky, Ohio, Indiana Orientation Courses for Advanced Manufacturing. Focus Workforce Skills Development November 3 14, 2014 Tri-State Area of Kentucky, Ohio, Indiana Orientation Courses for Advanced Manufacturing Focus Workforce Skills Development Festo Advanced Manufacturing Technology Training Seminars

More information

Hydraulic/pneumatic drive Cylinder (machine actuator) Optoelectronics Light curtain (sensor) Electronics Control system Danger! Hydraulics/pneumatics Valves (actuators) Safety control SRP/CS subsystem

More information

Training Program Worldwide 2016 Maintenance Technician. August 2015. Global Training The finest automotive learning.

Training Program Worldwide 2016 Maintenance Technician. August 2015. Global Training The finest automotive learning. Training Program Worldwide 2016 Maintenance Technician August 2015 Global Training The finest automotive learning. Stand 08/2015 1 EDUCATION 4 Passenger Cars 4 Fundamentals 4 T1355E Qualification Program2015,

More information

SHORT TRAINING COURSES

SHORT TRAINING COURSES Post Office Box SR 95, Spintex Road, Ghana Tel: +233 302 812680, Fax: +233 302 814709 E mail: contact@automationghana.com Website: www.automationghana.com SHORT TRAINING COURSES Equipping industries with

More information

Testing Automated Manufacturing Processes

Testing Automated Manufacturing Processes Testing Automated Manufacturing Processes (PLC based architecture) 1 ❶ Introduction. ❷ Regulations. ❸ CSV Automated Manufacturing Systems. ❹ PLCs Validation Methodology / Approach. ❺ Testing. ❻ Controls

More information

SOFTWARE-IMPLEMENTED SAFETY LOGIC Angela E. Summers, Ph.D., P.E., President, SIS-TECH Solutions, LP

SOFTWARE-IMPLEMENTED SAFETY LOGIC Angela E. Summers, Ph.D., P.E., President, SIS-TECH Solutions, LP SOFTWARE-IMPLEMENTED SAFETY LOGIC Angela E. Summers, Ph.D., P.E., President, SIS-TECH Solutions, LP Software-Implemented Safety Logic, Loss Prevention Symposium, American Institute of Chemical Engineers,

More information

Recognizing and understanding schematic symbols will enable you to comprehend a circuit s function.

Recognizing and understanding schematic symbols will enable you to comprehend a circuit s function. Schematic symbols are used to identify and graphically depict the function of fluid power components. Recognizing and understanding schematic symbols will enable you to comprehend a circuit s function.

More information

Utilities Engineering Technician Trailblazer Assessment Plan ASSESSMENT PLAN. Utilities Engineering Technician

Utilities Engineering Technician Trailblazer Assessment Plan ASSESSMENT PLAN. Utilities Engineering Technician Utilities Engineering Technician Trailblazer Assessment Plan ASSESSMENT PLAN Utilities Engineering Technician Jan Newberry, Training Manager, South West Water Chair of Trailblazer Project Team 18/08/2015

More information

Complete Software Solution for Teaching Future Technicians and Engineers that Covers all Levels

Complete Software Solution for Teaching Future Technicians and Engineers that Covers all Levels If you teach subjects related to hydraulic, pneumatic, electrical and control technologies, the illustration of concepts and the behaviour of systems are no doubt at the heart of your requirements. Created

More information

ILLINOIS DEPARTMENT OF CENTRAL MANAGEMENT SERVICES CLASS SPECIFICATION COMMUNICATIONS EQUIPMENT TECHNICIAN SERIES

ILLINOIS DEPARTMENT OF CENTRAL MANAGEMENT SERVICES CLASS SPECIFICATION COMMUNICATIONS EQUIPMENT TECHNICIAN SERIES ILLINOIS DEPARTMENT OF CENTRAL MANAGEMENT SERVICES CLASS SPECIFICATION COMMUNICATIONS EQUIPMENT TECHNICIAN SERIES CLASS TITLE POSITION CODE COMMUNICATIONS EQUIPMENT TECHNICIAN I 08831 COMMUNICATIONS EQUIPMENT

More information

Program Description. wind turbine technician academy

Program Description. wind turbine technician academy Program Description wind turbine technician academy In partnership with: 7107 Elm Valley Drive Kalamazoo, MI 49009 Phone: 269.353.1282 Fax: 269.353.1580 careeracademies@kvcc.edu www.kvcc.edu/training wind

More information

Duke University Health System

Duke University Health System Duke University Health System Job Description Job Title: Biomedical Equipment Technician Job Code: FLSA: Pay Band: 4D Date: Job Level: Level 1 General Description of the Job Class: Perform a variety of

More information

Inverter Field Service Technician II

Inverter Field Service Technician II Inverter Field Service Technician II This position requires extensive travel when in the field. When Inverter Field Service Technicians do not have field assignments they are assigned to the factory s

More information

ISA CERTIFIED AUTOMATION PROFESSIONAL (CAP ) CLASSIFICATION SYSTEM

ISA CERTIFIED AUTOMATION PROFESSIONAL (CAP ) CLASSIFICATION SYSTEM ISA CERTIFIED AUTOMATION PROFESSIONAL (CAP ) CLASSIFICATION SYSTEM Domain I: Feasibility Study - identify, scope and justify the automation project Task 1: Define the preliminary scope through currently

More information

Learning Systems Software Simulation

Learning Systems Software Simulation Learning Systems Software Simulation EasyVeep PLC controls and technology training FluidSIM Fluid Power training aid for instructors and design tool for engineers COSIMIR PLC 3D simulation tool for practical

More information

PROGRAM CRITERIA FOR ELECTRICAL ENGINEERING TECHNOLOGY

PROGRAM CRITERIA FOR ELECTRICAL ENGINEERING TECHNOLOGY PROGRAM CRITERIA FOR ELECTRICAL ENGINEERING TECHNOLOGY Scope These program criteria apply to programs having titles involving Electrical Engineering Technology including: electrical engineering, electrical

More information

APPENDIX A MICRO-COMPUTER REPAIR TECHNICIAN D.O.T. CODE 828.261-022. A. Basic Repair Skills 100

APPENDIX A MICRO-COMPUTER REPAIR TECHNICIAN D.O.T. CODE 828.261-022. A. Basic Repair Skills 100 STATE OF NEW YORK DEPARTMENT OF LABOR APPENDIX A MICRO-COMPUTER REPAIR TECHNICIAN D.O.T. CODE 828.261-022 This training outline represents a minimum standard in terms of work processes and related instruction

More information

Programmable Logic Controllers

Programmable Logic Controllers Programmable Logic Controllers PLC Basics Dr. D. J. Jackson Lecture 2-1 Operating systems and application programs A PLC contains a basic operating system that allows for: Downloading and executing user

More information

Wind Turbine Maintenance Technician

Wind Turbine Maintenance Technician Measuring What Matters in Job Ready Assessment Blueprint Wind Turbine Maintenance Technician Test Code: 2150 / Version: 01 Copyright 2010 General Assessment Information Wind Turbine Maintenance Technician

More information

Vehicle Engine Management Systems

Vehicle Engine Management Systems Unit 11: Vehicle Engine Management Systems NQF level 3: Guided learning hours: 60 BTEC National Unit abstract Modern motor vehicles continue to make use of the rapid advances in electronics technology

More information

INDUSTRIAL AUTOMATION AND ROBOTIC SYSTEMS

INDUSTRIAL AUTOMATION AND ROBOTIC SYSTEMS www.lit.ie Limerick Institute of Technology T. +353 61 293000 Moylish Park F. +353 61 293001 Limerick E. information@lit.ie Ireland Bachelor of Engineering (Level 7) in INDUSTRIAL AUTOMATION AND ROBOTIC

More information

Fig 3. PLC Relay Output

Fig 3. PLC Relay Output 1. Function of a PLC PLC Basics A PLC is a microprocessor-based controller with multiple inputs and outputs. It uses a programmable memory to store instructions and carry out functions to control machines

More information

THEME Competence Matrix - Electrical Engineering/Electronics with Partial competences/ Learning outcomes

THEME Competence Matrix - Electrical Engineering/Electronics with Partial competences/ Learning outcomes COMPETENCE AREAS STEPS OF COMPETENCE DEVELOPMENT 1. Preparing, planning, mounting and installing electrical for buildings and industrial applications He/She is able to prepare and carry out simple electrical

More information

E&I MAINTENANCE ENTRY TEST ENABLING OBJECTIVES. DESCRIBE hazards and precautions taken to avoid injury in the workplace.

E&I MAINTENANCE ENTRY TEST ENABLING OBJECTIVES. DESCRIBE hazards and precautions taken to avoid injury in the workplace. SAFETY Industrial DESCRIBE hazards and precautions taken to avoid injury in the workplace. Example #1: All of the following are common PPE used to perform maintenance activities EXCEPT: a. Safety Glasses

More information

ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT

ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT Advanced Manufacturing I 5608 TEH600, TEH601 Grades 10-12 Dual credit through Ivy Tech Recommended Prerequisite: Introduction to Advanced Manufacturing and

More information

Important: Always perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. P0106, P0107 P0107

Important: Always perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. P0106, P0107 P0107 Page 1 of 5 DTC P0106 DTC Descriptor 2006 Pontiac GTO GTO (VIN V) Service Manual Document ID: 1417869 DTC P0106: Manifold Absolute Pressure (MAP) Sensor Diagnostic Fault Information Important: Always perform

More information

TALLAHASSEE COMMUNITY COLLEGE

TALLAHASSEE COMMUNITY COLLEGE TALLAHASSEE COMMUNITY COLLEGE ADVANCED MANUFACTURING TRAINING CENTER 2012/2013 Catalog All courses listed are non-credit CNC Machine Operator (Lathe & Mill) MFT 0400 Intro to CNC Machining This course

More information

Email: 1 nrsapre@gmail.com, 2 dr.s.m.kumar@gmail.com

Email: 1 nrsapre@gmail.com, 2 dr.s.m.kumar@gmail.com INDUSTRIAL AUTOMATION WITH ELECTRO PNEUMATIC SYSTEM USING PLC & WIRELESS/LAN ENVIRONMENT - A REMOTE EXPERIMENT 1 Nitin Sapre, 2 Dr. S Mohan Kumar 1 Drives & Control Academy, Bosch Rexroth India Limited,

More information

Electronics Curriculum Guide

Electronics Curriculum Guide Electronics Curriculum Guide Program Description MCTI s Electronics program has a well-equipped electronics lab that provides up-to-date, hands on training. Students in the Electronics program learn entry-level

More information

Siemens Mechatronic Systems Certification Program (SMSCP)

Siemens Mechatronic Systems Certification Program (SMSCP) (SMSCP) Copyright Schutzvermerk AG 2012. / Copyright-Vermerk All rights reserved and Technical Education AG is the world leader in mechanics and automated systems technologies. has over 100 years of experience

More information

INSTALLATION ELECTRICIAN / MAINTENANCE ELECTRICIAN APPRENTICESHIP ASSESSMENT PLAN

INSTALLATION ELECTRICIAN / MAINTENANCE ELECTRICIAN APPRENTICESHIP ASSESSMENT PLAN INSTALLATION ELECTRICIAN / MAINTENANCE ELECTRICIAN APPRENTICESHIP ASSESSMENT PLAN Introduction and Overview This assessment plan is to accompany the Installation Electrician / Maintenance Electrician level

More information

CHALLENGER INSTITUTE OF TECHNOLOGY. Applied Engineering

CHALLENGER INSTITUTE OF TECHNOLOGY. Applied Engineering CHALLENGER INSTITUTE OF TECHNOLOGY Applied Engineering 2 Applied Engineering Graduates with real opportunities Challenger Institute s engineering training capitalises on its close liaison with industry

More information

Sensors Collecting Manufacturing Process Data

Sensors Collecting Manufacturing Process Data Sensors & Actuators Sensors Collecting Manufacturing Process Data Data must be collected from the manufacturing process Data (commands and instructions) must be communicated to the process Data are of

More information

Test Code: 8094 / Version 1

Test Code: 8094 / Version 1 Blueprint Electromechanical Engineering Technology PA Test Code: 8094 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Electromechanical Engineering Technology PA Blueprint

More information

Advanced Manufacturing Machinery Technician NOW (AMMT NOW)

Advanced Manufacturing Machinery Technician NOW (AMMT NOW) Vincennes University Indiana Center for Applied Technology (ICAT) Industrial Maintenance Training Advanced Manufacturing Machinery Technician NOW (AMMT NOW) Goals: 1. To provide high quality training on

More information

COURSE SYLLABUS INMT-1317 INDUSTRIAL AUTOMATION

COURSE SYLLABUS INMT-1317 INDUSTRIAL AUTOMATION COURSE SYLLABUS INMT-1317 INDUSTRIAL AUTOMATION Catalog Description: A study of the applications of industrial automation systems, including identification of system requirements, equipment integration,

More information

Release: 1. ICPPRN493 Set up and monitor in-line printing operations

Release: 1. ICPPRN493 Set up and monitor in-line printing operations Release: 1 ICPPRN493 Set up and monitor in-line printing operations ICPPRN493 Set up and monitor in-line printing operations Modification History Release Release 1 Comments This version first released

More information

Fault Diagnosis and Maintenance for CNC Machine. Based on PLC

Fault Diagnosis and Maintenance for CNC Machine. Based on PLC Fault Diagnosis and Maintenance for CNC Machine Based on PLC Deng Sanpeng [1, 2] Xu Xiaoli [2, 3] Chen Tao [2] 1.Tianjin University of Technology and Education,300222; 2. Beijing Institute of Technology,100081;

More information

University Centre at Blackburn College. Abbreviated Programme Specification Containing Both Core + Supplementary Information

University Centre at Blackburn College. Abbreviated Programme Specification Containing Both Core + Supplementary Information Abbreviated Programme Specification Containing Both Core + Supplementary Information The Degree consistently involves both employers in all stages of the programme delivery including design, delivery,

More information

Set objectives and provide support for team members (B5) OCR Unit Number: 3

Set objectives and provide support for team members (B5) OCR Unit Number: 3 Unit Title: Set and provide support for team (B5) OCR Unit Number: 3 Unit Number: M/600/9600 Level: 3 Credit value: 5 Guided learning hours: 35 Unit purpose and aim This purpose of this unit is to provide

More information

POSITION DESCRIPTION NORTHFIELD PUBLIC SCHOOLS September 2007

POSITION DESCRIPTION NORTHFIELD PUBLIC SCHOOLS September 2007 POSITION DESCRIPTION NORTHFIELD PUBLIC SCHOOLS September 2007 SECTION I: GENERAL INFORMATION Position Title: Master Electrician Department: Building & Grounds Immediate Supervisor s Position Title: Director

More information

IC 1101 Basic Electronic Practice for Electronics and Information Engineering

IC 1101 Basic Electronic Practice for Electronics and Information Engineering 7. INDUSTRIAL CENTRE TRAINING In the summer between Year 1 and Year 2, students will undergo Industrial Centre Training I in the Industrial Centre (IC). In the summer between Year 2 and Year 3, they will

More information

Canadian Technology Accreditation Criteria (CTAC) ELECTRICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)

Canadian Technology Accreditation Criteria (CTAC) ELECTRICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Preamble Canadian Technology Accreditation Criteria (CTAC) ELECTRICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) These CTAC are applicable to programs having titles involving

More information

Set objectives and provide support for team members (B5)

Set objectives and provide support for team members (B5) Unit Title: Unit Number 25 Level: 3 Credit value: 5 Guided learning hours: 35 Unit expiry date: 28/2/2010 Unit purpose and aim Set and provide support for team (B5) This purpose of this unit is to provide

More information

Elements Elements describe the essential outcomes.

Elements Elements describe the essential outcomes. AURETU005 Application Competency Field Unit Sector Elements Elements describe the essential outcomes. Retrofit and modify air conditioning and HVAC systems This unit describes the performance outcomes

More information

Release: 1. CPPSEC3020A Monitor security from control room

Release: 1. CPPSEC3020A Monitor security from control room Release: 1 CPPSEC3020A Monitor security from control room CPPSEC3020A Monitor security from control room Modification History Not Applicable Unit Descriptor Unit descriptor This unit of competency specifies

More information

Level 3 Diploma in Dental Nursing at Newcastle Dental Hospital

Level 3 Diploma in Dental Nursing at Newcastle Dental Hospital Level 3 Diploma in Dental Nursing at Newcastle Dental Hospital COURSE INFORMATION Newcastle Dental Hospital Newcastle Dental hospital is one of the leading teaching hospitals in the UK, with pioneering

More information

How to read this guide

How to read this guide How to read this guide The following shows the symbols used in this Quick start guide with descriptions and examples. Symbol Description Example P oint Reference Caution [ ] This symbol explains information

More information

HVAC MAINTENANCE SUPERVISOR (Range 121)

HVAC MAINTENANCE SUPERVISOR (Range 121) (Range 121) DEFINITION Supervises, plans, coordinates and performs a variety of fundamental and skilled work in the building and mechanical trades to ensure the overall physical integrity of District Locations.

More information

POSITION DESCRIPTION

POSITION DESCRIPTION TITLE: Maintenance II - HVAC REPORTS TO: DEPARTMENT: Buildings and Grounds CLASSIFICATION: Director of Buildings and Grounds Buildings and Grounds Bargaining Unit I. Accountability Objectives: Primarily

More information

Elements Elements describe the essential outcomes. 1. Prepare to diagnose and repair air conditioning and HVAC system

Elements Elements describe the essential outcomes. 1. Prepare to diagnose and repair air conditioning and HVAC system AURETU004 Application Competency Field Unit Sector Elements Elements describe the essential outcomes. 1. Prepare to diagnose and repair air conditioning and HVAC system 2. Diagnose air conditioning and

More information

Programming Logic controllers

Programming Logic controllers Programming Logic controllers Programmable Logic Controller (PLC) is a microprocessor based system that uses programmable memory to store instructions and implement functions such as logic, sequencing,

More information

Elements Elements describe the essential outcomes. 1. Prepare to dismantle air conditioning compressor

Elements Elements describe the essential outcomes. 1. Prepare to dismantle air conditioning compressor Application Competency Field Unit Sector Elements Elements describe the essential outcomes. 1. Prepare to dismantle air conditioning compressor 2. Dismantle and evaluate compressor and This unit describes

More information

Guidelines for the Substation Maintenance Electrician Apprenticeship. January, 2011

Guidelines for the Substation Maintenance Electrician Apprenticeship. January, 2011 Guidelines for the Substation Maintenance Electrician Apprenticeship January, 2011 Substation Maintenance Electrician Apprenticeship Table of Contents Substation Maintenance Electrician Apprenticeship...

More information

ADDENDUM TO THE CONTRACT. for the. Bartlett Regional Hospital Server Room Cooling System Replacement. Contract No. E12-149

ADDENDUM TO THE CONTRACT. for the. Bartlett Regional Hospital Server Room Cooling System Replacement. Contract No. E12-149 ADDENDUM TO THE CONTRACT for the ENGINEERING DEPARTMENT Bartlett Regional Hospital Server Room Cooling System Replacement Contract No. E12-149 ADDENDUM NO.: TWO CURRENT DEADLINE FOR BIDS: January 20, 2012

More information

Unit LT01 Carry Out Routine Lift Truck Maintenance

Unit LT01 Carry Out Routine Lift Truck Maintenance Unit LT01 Carry Out Routine Lift Truck Maintenance UNIT OVERVIEW This unit is about conducting routine maintenance, adjustment and replacement activities as part of the periodic servicing of Lift Trucks.

More information

WORK INTEGRATED LEARNING IN ELECTRICAL ENGINEERING AT UNISA 1. Abstract

WORK INTEGRATED LEARNING IN ELECTRICAL ENGINEERING AT UNISA 1. Abstract WORK INTEGRATED LEARNING IN ELECTRICAL ENGINEERING AT UNISA 1 Abstract The new University of South Africa (UNISA) was the first comprehensive university in South Africa that could offer both academic and

More information

Maximizing return on plant assets

Maximizing return on plant assets Maximizing return on plant assets Manufacturers in nearly every process industry face the need to improve their return on large asset investments. Effectively managing assets, however, requires a wealth

More information

Industrial Automation Training Academy. PLC, HMI & Drives Training Programs Duration: 6 Months (180 ~ 240 Hours)

Industrial Automation Training Academy. PLC, HMI & Drives Training Programs Duration: 6 Months (180 ~ 240 Hours) nfi Industrial Automation Training Academy Presents PLC, HMI & Drives Training Programs Duration: 6 Months (180 ~ 240 Hours) For: Electronics & Communication Engineering Electrical Engineering Instrumentation

More information

Programmable Logic Controllers Definition. Programmable Logic Controllers History

Programmable Logic Controllers Definition. Programmable Logic Controllers History Definition A digitally operated electronic apparatus which uses a programmable memory for the internal storage of instructions for implementing specific functions such as logic, sequencing, timing, counting,

More information

Unit ID: 482 Domain AUTOMOTIVE ELECTRICAL AND ELECTRONICS Title: Install and repair electrical lighting system of vehicles Level: 2 Credits: 6

Unit ID: 482 Domain AUTOMOTIVE ELECTRICAL AND ELECTRONICS Title: Install and repair electrical lighting system of vehicles Level: 2 Credits: 6 Unit ID: 482 Domain AUTOMOTIVE ELECTRICAL AND ELECTRONICS Title: Install and repair electrical lighting system of vehicles Level: 2 Credits: 6 Purpose This unit standard specifies the competencies required

More information

Industrial Robot Technology

Industrial Robot Technology Unit 132: Industrial Robot Technology Unit code: Y/602/5130 QCF Level 3: BTEC Nationals Credit value: 10 Guided learning hours: 60 Aim and purpose This unit will develop learners understanding of the operation

More information

Digital Single Axis Controller

Digital Single Axis Controller Digital Single Axis Controller The concept of intelligent hydraulic drive a vision? DSAC (Digital Single Axis Controller) Do you need hydraulic servo drive for your machine/system? What would it be like

More information

Degree programme in Automation Engineering

Degree programme in Automation Engineering Degree programme in Automation Engineering Course descriptions of the courses for exchange students, 2014-2015 Autumn 2014 21727630 Application Programming Students know the basis of systems application

More information

CHAPTER 43 INTERIOR COMMUNICATIONS ELECTRICIAN (IC) NAVPERS 18068-43E CH-64

CHAPTER 43 INTERIOR COMMUNICATIONS ELECTRICIAN (IC) NAVPERS 18068-43E CH-64 CHAPTER 43 INTERIOR COMMUNICATIONS ELECTRICIAN (IC) NAVPERS 18068-43E CH-64 Updated: October 2015 TABLE OF CONTENTS INTERIOR COMMUNICATIONS ELECTRICIAN (IC) SCOPE OF RATING GENERAL INFORMATION INTERIOR

More information

EUROPASS DIPLOMA SUPPLEMENT

EUROPASS DIPLOMA SUPPLEMENT EUROPASS DIPLOMA SUPPLEMENT TITLE OF THE DIPLOMA (ES) Técnico Superior en Automoción TRANSLATED TITLE OF THE DIPLOMA (EN) (1) Higher Technician in Motor Vehicles --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

More information

Memorandum. Human Resources Division

Memorandum. Human Resources Division Memorandum Human Resources Division TO: FROM: RE: Vacellia Clark, Chief Examiner Civil Service Commission Human Resources Staff Establish a Passing Score for ARMS Programmer/Analyst DATE: January 29, 2014

More information

Introduction to Process Control Actuators

Introduction to Process Control Actuators 1 Introduction to Process Control Actuators Actuators are the final elements in a control system. They receive a low power command signal and energy input to amplify the command signal as appropriate to

More information

Elements Elements describe the essential outcomes.

Elements Elements describe the essential outcomes. Application Competency Field Unit Sector Elements Elements describe the essential outcomes. This unit describes the performance outcomes required to service air conditioning systems, including heating,

More information

(Culture and Education Ministers Conference Resolution of 16 May 2003)

(Culture and Education Ministers Conference Resolution of 16 May 2003) O U T L I N E C U R R I C U L U M for vocational education and training in the occupation of Motor vehicle mechatronics technician (Culture and Education Ministers Conference Resolution of 16 May 2003)

More information

Cut down your costs, increase your productions efficiently with the knowledge of PLC s Siemens technology. SITRAIN TM THAILAND Page 1 of 14

Cut down your costs, increase your productions efficiently with the knowledge of PLC s Siemens technology. SITRAIN TM THAILAND Page 1 of 14 Training Center Digital Factory and Process Industries & Drives 1. Introduction 2. Course content 3. Course Schedule 4. Terms and Condition 5. Registration Channel Page 1 of 14 1. Introduction SITRAIN

More information

School of Electrical and Information Engineering University of the Witwatersrand, Johannesburg ELEN3024 Communication Fundamentals

School of Electrical and Information Engineering University of the Witwatersrand, Johannesburg ELEN3024 Communication Fundamentals School Information of Electrical and Engineering School of Electrical and Information Engineering University of the Witwatersrand, Johannesburg ELEN3024 Communication Fundamentals Course Brief and Outline:

More information

net COMPETENCE MATRIX

net COMPETENCE MATRIX net www.vocationalqualification.net COMPETENCE MATRIX 2 www.vocationalqualification.net What is a Competence Matrix? Competence Matrix is a table which displays work-related competence descriptions and

More information

Los Angeles Trade Technical College Student Employment Center. Diesel & Related Technology Full Time

Los Angeles Trade Technical College Student Employment Center. Diesel & Related Technology Full Time Job Title: Composite Mechanic Job Number: 923 Hours/Days: 7a-3p Salary: $22.29-22.53/ hr Requirements: Skills Requirement: Be familiar with AC/DC power and control systems; Maintain certification acquired;

More information

This is us. Passionate about Apprenticeships.

This is us. Passionate about Apprenticeships. Technical TRAINING This is us The Manchester College is the only assessment centre in the UK that can offer all levels and disciplines of irtec licensing. We can assess you for a licence at any of the

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020. NZQF NQ Ref 1123 Version 3 Page 1 of 9 National Certificate in Electronic (Level 4) Level 4 Credits 101 This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

More information

-SQA- SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NQ NATIONAL CERTIFICATE MODULE DESCRIPTOR

-SQA- SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NQ NATIONAL CERTIFICATE MODULE DESCRIPTOR -SQA- SCOTTISH QUALIFICATIONS AUTHORITY Hanover House 24 Douglas Street GLASGOW G2 7NQ NATIONAL CERTIFICATE MODULE DESCRIPTOR -Module Number- 2210102 -Session-1992-93 -Superclass- QH -Title- VEHICLE SECURITY

More information

Content Sheet 3-1: Equipment Management Overview

Content Sheet 3-1: Equipment Management Overview Content Sheet 3-1: Equipment Management Overview Role in quality management system Equipment management is one of the essential elements of a quality management system. Proper management of the equipment

More information