The type, the number and the position of special contacts The guiding, keying or locking system. Special contacts* & locking POWER 20A RADSOK 70A*

Transcription

1 8 Interconnect products HiinX reate the connector you need HiinX Series mphenol has engineered a complete range of high & medium density, staggered grid, modular connectors with both 1.905x1.905[.075x.075] & 2.54x2.54 [.100x.100] pitches. The HiinX range provides a unique choice of solutions by allowing a mix of various contact types: signal, power, fiber optics and coaxial lines. The concept With our HiinX, build your own connector the way you want it! The HiinX is a system of modules, metal rails and fittings. Thanks to this modularity, a wide range of contact combinations can be made at the board level. Whatever types of signals required, from power to fiber optics, almost all existing contacts on the market can be adapted to our connector. et s maximize the board capabilities! Modularity for custom connector design! With the HiinX series, you specify: The density of signal contacts The type and number of signal contacts With the HiinX series, the design of the connector is up to you! With HiinX, feel free to create your own product. mphenol remains the only provider of both assembly and delivery. The type, the number and the position of special contacts The guiding, keying or locking system MI-T /190 to /193 MI-T /57 to /66, /138, /139 Some HiinX arrangements are fully compatible with the MI T (/57 to /66, /138, /139 & /190 to /193 detailed sheets) (see pages 23 & 45). QUIK SEETION GUIE ensity Signal contacts Special contacts* Guiding, keying & locking Housing See Section Medium density: HiinX ,54 2,54 1,27 GES 10 to 31 EME ME or solder cup, SMT, soldering on flex, female right angle tail, male straight tail, consult us. GE 12 GE 14 OWE 20 SOK 70* MHEUX OXI *or SOK contact, consult us. GE 16 GUIING 8 possibilities 65 to 72 KEYING 128 possibilities 01 to 64 & 201 to 264 OKING jackscrew, jackset & jacksocket available GES 18 to 22 2 OWS 0 to 70* contacts with or without special contacts 3 OWS 0 to 170* contacts with or without special contacts * or further arrangements, consult us. GES 24 to 31 HiinX 2.54 pages 10 to 31 High density: EME ME HiinX or solder cup, SMT, soldering on flex, female right angle tail, male straight tail, consult us. OWE 20 MHEUX SOK 70 OXI GUIING 8 possibilities 65 to 72 KEYING 64 possibilities 01 to 64 OKING jackscrew, jackset & jacksocket available 2 OWS 10 to 100 contacts 3 OWS 0 to 206 contacts with or without special contacts HiinX pages 32 to 49 GES 32 to 49 GE 34 GE 36 GE 38 GES 40 to 44 GES 46 to 49 *Important note: HiinX : special contacts are available for 3-row version only.

2 Interconnect products 9 HiinX Series The 100% modular and hybrid connector HiinX Series Table of contents HiinX product range... 8 HiinX emale signal contacts for receptacles Male signal contacts for plugs Special contacts for hybrid connectors Non keying guides Keying guides / onnector polarization ocking: fixed jacksets, hexagonal turning jacksets, slotted turning jacksets ealignment capability / Mating sequence Signal version: compatibility with MI-T Signal version: typical arrangements 2 rows Signal version: layouts 2 rows Signal version: typical arrangements 3 rows Signal version: layouts 3 rows Hybrid version: typical arrangements 2 rows Hybrid version: layouts 2 rows Hybrid version: typical arrangements 3 rows The HiinX series serves various markets, including: Hybrid version: layouts 3 rows HiinX emale signal contacts for receptacles Male signal contacts for plugs Special contacts for 3-row hybrid connectors Non keying guides Keying guides / onnector polarization ocking: fixed jacksets, hexagonal turning jacksets, slotted turning jacksets ealignment capability / Mating sequence Signal version: compatibility with MI-T Signal version: typical arrangements 2 & 3 rows...46 Signal version: layouts 2 & 3 rows Hybrid version: dimensions Hybrid version: layouts Tooling ommercial vionics & irframe Military vionics & irframe 4IS Navy Industrial

3 10 Interconnect products HiinX Series HIINX 2.54 >>> GENE SEIITIONS Main characteristics Medium density: 0.11 cts/mm 2 [71 cts/inch 2 ] rom 2 to 3 rows, 10 to 170* signal contacts 5 per signal contact (up to 6 current rating available upon request) ress-fit solderless attachment technology and crimp contact available Some signal contact versions are 100% compatible with the M55302 /57 to /66, /138 & /139 MEIUM ENSITY unique connector, both hybrid and modular ost effective, easy to install, highly reliable More current through each contact Greater performance and optimal protection in harsh environments ompatible with signal connectors on the market (MI-T-55302/57 to /66, /138, /139) 2.54 [.100] staggered grid (1.27 [.050] offset), 2.54 [.100] between rows Markets Main applications Terminations ecommended configurations Special contacts Standard MI-T /57 to /66, /138, /139 How to order Type of contacts? eceptacle emale Male lug 2 3 emale Male escription YS ight angle tail short 2.8 [.110] onsult us Y ight angle tail standard 3.5 [.140] Y ight angle tail long 4.4 [.172] YS or 3-row Straight tail short 3.5 or 2.8 [.140 or.110] Y version only Straight tail standard 4.4 or 3.5 [.172 or.140] Y onsult us Straight tail long 5.9 or 4.4 [.234 or.172] Y / ress fit X X* rimp contact *or 3-row version only Solder up onsult us SMT Solder tail for flexible circuit onnector type Number of rows Signal modules contact termination type (see pages 12 to 15) HX lating Blank: Standard plating : ead free plating - ohs or receptacle only Number of signal contacts (see pages 24 to 31) 2 rows 3 rows * 008* 012* * 020* 024* * * * * * * Signal version * * * * * * available upon request * * * * 116* 120* * 128* 132* * * * 152* 156* * 164* 168* 170 Hybrid version To be defined ivided by 10 To be defined ivided by 12 or 18 Special module (see page 16) Male emale OWE 20* M1 1 SOK 70 onsult us OXI* M1 1 MHEUX * XM X * 2 contacts or cavities per module Number of special modules (X) + type of the module (XXX) X XXX (blank = signal contacts only) Ex: 2M1 3M1 2 male power modules and 3 male coaxial modules Keying, guiding, locking (see pages 18 to 22) -shape guides? ound guides? 01 by default YES YES YES ocking? 01 to * to 264* according to MI T to 68 69* to 72* 73* to 96* 101* to 124* Standard? eviation YES NO - onsult us * w/o mouting ears -200* with middle fitting -400* with middle fitting -000 w/o mouting ears by default -800* monolithic version w/o mouting ears -900* monolithic version Important note SOK, coaxial and mphelux contacts have to be ordered separately

4 Interconnect products 11 HIINX 2.54 >>> TEHNI SEIITIONS imensional characteristics 2,54 2,54 HH X X 1 1 B l I e d H = 8.5 [.335] for receptacles H = 10.2 MX [.401] for plugs l = 6.4 MX [.252] for 2-row connectors l = 8.95 MX [.352] for 3-row connectors = [1.350] to [4.350] for 2-row connectors = 63.5 [2.500] to [6.500] for 3-row connectors B = 7 + X [ X] for 2-row connectors B = X [ X] for 3-row connectors X = Board thickness + hardware thickness d = 17 [.670] e = 1.8 [.071] to 3.4[.134] or 2.5 MIN [.098] (for Y contacts) 1,27 HiinX Series emale contact Male contact Starclip* female technology: 6 tines for better reliability 6 contact tines instead of 4 Excellent mechanical and electrical reliability Better resistance to high vibrations Improved electrical conductivity 100% compatible with other connectors Material Hood: machined brass alloy Starclip: ube [Beu], stamped and formed lating Hood: tin lead or lead free Starclip: gold over nickel Mating end diameter: Ø 0.76 [.030] ontact section (mating side): 0.45 mm² [.0007 in²] Material: machined brass alloy lating: gold over nickel Materials Guiding devices: electroless nickel plating over brass uzn or passivated stainless steel 303 ails: passivated stainless steel 316 lastic insert: thermoplastic, 30% glass-fiber filled MEHNI HTEISTIS MI-T sections Backoff 1 (mm) > 0.9 [.035]*** N/ Mating force per contact (N) 0.98 MX Unmating force per contact (N) MX urability cycles Sinusoidal vibrations (10 to 2000 Hz) micro discontinuity 2ns 15 g andom vibrations (5 to 2000 Hz) micro discontinuity 2ns 0.5 g² / Hz Shocks 6ms ½ sinus 2ns 100 g ENVIONMENT HTEISTIS Thermal shocks ( ) -65 / Salt Spray (hours) Humidity ays 10 Temperature ( ) 25/ Humidity rate (%) EETI HTEISTIS urrent rating per contacts () 5** Insulation resistance (at 500Vdc) (GΩ) 5 MIN ontact resistance (mω) 10 MX ielectric Withstanding Voltage (Vrms) 1000 MIN : When both connectors are fully mated, the backoff is the maximum distance the connectors can be unmated while functioning properly * Except for crimp contacts ** Other, please consult us *** 0.9 [.035] for crimp contact 1.3 ± 0.1 [.051 ±.004] for other contacts

5 12 Interconnect products HIINX 2.54 >>> SIGN ONTTS () EME ONTTS O EETES HiinX Series Starclip** female technology - 6 contact tines instead of 4 - Excellent mechanical and electrical reliability - Better resistance to high vibrations - Improved electrical conductivity - 100% compatible with other connectors - Size 22: high average current - lip for male contact Ø 0.76 ± [.030 ±.001] - lating on active part (clip) u Ni u 1 [.039] 3.5 [.138] 1.3 [.051] ress-fit rimp barrel - Solderless assembly - Mother board or mezzanine connection - B thickness: 2.5 MIN [.098] - Insertion forces: 65 N typical - rimping on wire - WG gauge 22 to 24 recommended - Terminations protected by a casing cemented to the moulding Termination style Y Termination style X SMT* Solder cup* - SMT soldering - B thickness: specific, consult us - Hard-soldering on wire - Mother board - able to board or cable to cable connection - Solder cup for 20 to 24 WG wire onsult us T onsult us Z Soldering on flex* - Hard soldering on flexible circuit - B thickness: specific, consult us onsult us YS/Y MX 2.8 ± 0.2 [.110±.008] Y X Z* YS*/ Y* 6.3 ± 0.2 [.248 ±.008] 4.9 ± 0.2 [.193 ±.008] YS: 1.5 ± 0.2 [.059 ±.008] Y: 2.4 ± 0.2 [.093 ±.008] Termination section Ø 0.82 [.032] Ø 1.22 [.048] 1.6 MX [.063] 0.45 ± 0.3 [.018 ±.001] Barrel standard termination plating µm [µ in] Barrel ohs termination plating** µm [µ in] 2 [.079] Ni electrolytic [.598] Ni electroless + 10 [.394] Sn b 1 [.039] u [.138] Ni [.051] u 3 [.118] Ni + 10 [.394] Sn b N/ N/ 2.5 [.089] Ni + 5 [.197] bright pure Sn ** Except for crimp contacts * onsult us

6 Interconnect products 13 HIINX 2.54 >>> SIGN ONTTS () EME ONTTS O EETES Short straight tail - Mother board or mezzanine connection - B thickness: 2.5 [.098] for 2-row version 1.8 [.071] for 3-row version Standard straight tail - Mother board or mezzanine connection - B thickness: 3.5 [.138] for 2-row version 2.5 [.098] for 3-row version HiinX Series Termination style YS Termination style Y ong straight tail Short right angle tail* - Mother board or mezzanine connection - B thickness: 5 [.197] for 2-row version 3.5 [.138] for 3-row version - Extender card - B thickness: consult us Termination style Y onsult us YS Standard right angle tail* ong right angle tail* - Extender card - Extender card - B thickness: consult us - B thickness: consult us onsult us Y onsult us Y YS Y Y YS* Y* Y* 2-row: 3.5 ± 0.20 [.140 ±.010] 2-row: 4.4 ± 0.20 [.172 ±.010] 2-row: 5.9 ± 0.20 [.234 ±.010] MX 3-row: 2.8 ± 0.20 [.110 ±.010] 3-row: 3.5 ± 0.20 [.140 ±.010] 3-row: 4.4 ± 0.20 [.172 ±.010] onsult us Termination section Ø 0.68 MX [.027] Barrel standard termination plating µm [µ in] 3 [.118] Ni + 10 [.394] Sn b Barrel ohs termination plating* µm [µ in] 2.5 [.089] Ni + 6 [.197] bright pure Sn * onsult us

7 14 Interconnect products HIINX 2.54 >>> SIGN ONTTS () ME ONTTS O UGS HiinX Series Short right angle tail - aughter board or extender card - B thickness: 1.8 MX [.071] Standard right angle tail - aughter board or extender card - B thickness: 2.5 MX [.098] Termination style YS Termination style Y Short right angle tail SMT* - aughter board or extender card - B thickness: 3.5 MX [.138] - SMT soldering - aughter board or extended card - B thickness: specific, consult us Termination style Y onsult us T YS Y Y MX 2.8 ± 0.20 [.110 ±.010] 3.5 ± 0.20 [.140 ±.010] 4.4 ± 0.20 [.172 ±.010] Termination section Ø 0.68 MX [.027] Mating end diameter lating (µm [µin]) Ø 0.76 ± [.030 ±.001] 1 [.039] u [.138] Ni [.051] u * onsult us

8 Interconnect products 15 HIINX 2.54 >>> SIGN ONTTS () ME ONTTS O UGS rimp barrel - rimping on wire - WG gauge 22 to 24 recommended - Terminations protected by a casing cemented to the moulding - or 3-row version only Short straight tail* - aughter board or mezzanine connection - B thickness: 1.8 MX [.071] - or 3-row version only HiinX Series onsult us X onsult us YS Standard straight tail* ong straight tail* - aughter board or mezzanine connection - B thickness: 2.5 MX [.098] - or 3-row version only - aughter board or mezzanine connection - B thickness: 3.5 MX [.138] - or 3-row version only onsult us Y onsult us Y Solder cup* - Hard soldering on wire - aughter board - able to board or cable to cable connection - Solder cup for 20 to 24 WG wire - or 3-row version only onsult us Z X* YS* Y* Y* Z* MX 6.3 ± 0.20 [.248 ±.010] 2.8 ± 0.20 [.110 ±.010] 3.5 ± 0.20 [.140 ±.010] 4.4 ± 0.20 [.172 ±.010] 2.54± 0.25 [.100 ±.010] Termination section Ø 1.22 [.048] Ø 0.68 MX [.027] Ø 1.6 MX [.063] Mating end diameter lating (µm [µin]) Ø 0.76 ± [.030 ±.001] 1 [.039] u [.138] Ni [.051] u * onsult us

9 16 Interconnect products HIINX 2.54 >>> SEI ONTTS () O 2-OW ONNETOS * OWE contacts Straight female power contact ight angle male power contact HiinX Series - Mother board - 2 straight female contacts - 20 / contact - B thickness: 1.8 [.071] to 2.5 [.098] - Termination section Ø 1.4 MXI [.055] - aughter board - 2 right angle male contacts - 20 / contact - B thickness: 1.8 [.071] to 2.5 [.098] - Termination section: Ø 1.2 MXI [.047] Module designation 1 Module designation M1 MHEUX TM IN 801 termini emale amphelux TM contact Male amphelux TM contact - 2 amphelux TM termini - Multi-mode - Modules are supplied less contacts, consult us - omplied with the IN 801 specification - Keyed to provide anti-rotation - 2 amphelux TM termini - Multi-mode - Modules are supplied less contacts, consult us - omplied with the IN 801 specification - Keyed to provide anti-rotation Module designation X Module designation XM OXI contacts Straight female coaxial contact - Mother board or mezzanine connection - 2 cavities for straight coaxial female contacts - or more information, consult us - Modules are supplied less contacts - ata rate: up to 1.4 GHz / 3 Gbit.s -1 ight angle male coaxial contact - aughter board or extender card - 2 cavities for right angle coaxial male contacts - or more information, consult us - Modules are supplied less contacts - ata rate: up to 1.4 GHz / 3 Gbit.s -1 Module designation 1 Module designation M1 SOK contacts emale cavity module for SOK contact - 1 cavity for male SOK contact - Mother board - 70 / contact - Termination section: the body shape, the section and the length of the termination are specific to your need: consult us ight angle male SOK contact - ixing with retainer - aughter board - 1 male SOK contact - 70 / contact - Termination section: the body shape, the section and the length of the termination are specific to your need: consult us onsult us - onsult us -

10 Interconnect products 17 HIINX 2.54 >>> SEI ONTTS () O 3-OW ONNETOS * OWE contacts Straight female power contact ight angle male power contact - Mother board - 2 straight female contacts - 20 / contact - B thickness: 1.8 [.071] to 2.5 [.098] - Termination section Ø 1.4 MXI [.055] - aughter board - 2 right angle male contacts - 20 / contact - B thickness: 1.8 [.071] to 2.5 [.098] - Termination section: Ø 1.2 MXI [.047] HiinX Series Module designation 1 Module designation M1 MHEUX TM IN 801 termini emale amphelux TM contact Male amphelux TM contact - 2 amphelux TM termini - Multi-mode - Modules are supplied less contacts, consult us - omplied with the IN 801 specification - Keyed to provide anti-rotation - 2 amphelux TM termini - Multi-mode - Modules are supplied less contacts, consult us - omplied with the IN 801 specification - Keyed to provide anti-rotation Module designation X Module designation XM OXI contacts Straight female coaxial contact - Mother board or mezzanine connection - 2 cavities for straight coaxial female contacts - or more information, consult us - Modules are supplied less contacts - ata rate: up to 1.4 GHz / 3 Gbit.s -1 ight angle male coaxial contact - aughter board or extender card - 2 cavities for right angle coaxial male contacts - or more information, consult us - Modules are supplied less contacts - ata rate: up to 1.4 GHz / 3 Gbit.s -1 Module designation 1 Module designation M1 SOK contacts emale cavity module for SOK contact - 1 cavity for male SOK contact - Mother board - 70 / contact - Termination section: the body shape, the section and the length of the termination are specific to your need: consult us onsult us - ight angle male SOK contact - ixing with retainer - aughter board - 1 male SOK contact - 70 / contact - Termination section: the body shape, the section and the length of the termination are specific to your need: consult us onsult us - MX 1 M1 X XM 1 M1 2 rows 3 rows 3.4 [.134] 3.4 [.134] [.151] [.806] 13.4 [.528] 3.55 [.140] [.806] 13.4 [.528] * Hybrid modules will be preferably positioned on the connector sides 3 [.118] 3 [.118] [.172] 3 [.118] OXI ONTTS Impedance (Ω) 50 Voltage rating (V MS) 180 urrent rating (m) 500 ontact retention (N) 50 MIN requency range (GHz) 0 to 1 ontact resistance (mω) 12 MX VSW at 1 (GHz) 1.3 MX Insertion and extraction force per contact (N) 1 15

11 18 Interconnect products HIINX 2.54 >>> KEYING & GUIING () U OUN GUIES HiinX Series Standard d d - 1 female socket and 1 male pin - Non keying - Nickel over brass - Mating with 65 or 69 keying - MI-T N: X eversed.130 ± ± ± ±.010 or receptacle: d or receptacle: d - 1 male pin and 1 female socket - Non keying - Nickel over brass - Mating with 66 or 70 keying ontact #1 65 ontact #1 66 Two male guide pins Two female guide sockets d d - 2 male guide pins - Non keying - Nickel over brass - Mating with 68 or 72 keying d d - 2 female guide sockets - Non keying - Nickel over brass - Mating with 67 or 71 keying ONG U OUN GUIES [.247] standard - 1 female socket and 1 male pin - Non keying - or receptacle and straight plug w/o mounting ears - Nickel over brass - Mating with 69 or 65 keying - MI-T-55302/63 & /64 /N: X [.247] reversed - 1 male pin and 1 female socket - Non keying - or receptacle and straight plug w/o mounting ears - Nickel over brass - Mating with 70 or 66 keying [.247] two male guide pins - Non keying - or receptacle and straight plug w/o mounting ears - Nickel over brass - Mating with 72 or 68 keying [.247] two female guide sockets - Non keying - or receptacle and straight plug w/o mounting ears - Nickel over brass - Mating with 71 or 67 guides ± ± Important note: all dimensions are in inch, except as otherwise specified. ll dimensions ll dimensions are given are given for information information only and only are and in are mm in [inch], inch, except as otherwise specified

12 Interconnect products 19 HIINX 2.54 >>> KEYING & GUIING () SHE GUIES Standard male guide pin - 4 keying possibilities - Electroless nickel over brass - MI-T N: Y[-01 thru 64] 01 thru [.247] ong male guide pin - 4 keying possibilities - or receptacle and straight plug w/o mouting ears - Electroless nickel over brass - Mating with 01 thru 64 or 201 thru 264 keying - MI-T-55302/63 & /64 N: Y[-01 thru -64] 201 thru 264 Standard female guide socket [.247] ong female guide socket - 4 keying possibilities - Electroless nickel over brass - MI-T-55302, N: Y[-01 thru 64] 01 thru 64-4 keying possibilities - or receptacle and straight plug w/o mounting ears - Electroless nickel over brass - Mating with 01 thru 64 or 201 thru 264 keying - MI-T-55302/63 & /64 N: Y[-01 thru -64] 201 thru 264 HiinX Series ONNETO OIZTION WITH SHE GUIE INS N SOKETS Important note: all dimensions are in inch, except as otherwise specified.

13 20 Interconnect products HIINX 2.54 >>> KEYING & GUIING () OKING ixed jacksets HiinX Series Standard fixed jackset 73: standard - Mating with 81, 85, 89, 93, 101, 105, 109, 113, 117 & 121 fittings - MI-T-55302/58, /59, /60, /61, /66, /138 & /139 N: 74: reversed - Mating with 82, 86, 90, 94, 102, 106, 110, 114, 118 & 122 fittings 75: two jackscrews - Mating with 84, 88, 92, 96, 104, 108, 112, 116, 120 & 124 fittings 76: two jacksockets - Mating with 83, 87, 91, 103, 107, 111, 115, 119 & 123 fittings [.247] ong fixed jackset or receptacle and straight plug, w/o mounting ears ) 77: standard - Mating with 81, 85, 89, 93, 101, 105, 109, 113, 117 & 121 fittings - MI-T-55302/63 & /64 N: 78: reversed - Mating with 82, 86, 90, 94, 102, 106, 110, 114, 118 & 122 fittings 79: two jackscrews - Mating with 84, 88, 92, 96, 104, 108, 112, 116, 120, & 124 fittings 80: two jacksockets - Mating with 83, 87, 91, 103, 107, 111, 115, 119 & 123 fittings 73 thru thru 80 Hexagonal turning jacksets 3.43 [.135] Xtrashort hexagonal turning jackset or right angle plug 101: standard - Mating with 73 & 77 fittings - MI-T-55302/57, /59 & /138 N: H 102: reversed - Mating with 74 & 78 fittings 103: two jackscrews - Mating with 76 & 80 fittings 104: two jacksockets - Mating with 75 & 79 fittings 5.08 [.200] short hexagonal turning jackset or straight plug and receptacle, w/o crimp contacts 105: standard - Mating with 73 & 77 fittings - MI-T-55302/58, /60, /62, /63 & /139 N: H 106: reversed - Mating with 74 & 78 fittings 107: two jackscrews - Mating with 76 & 80 fittings 108: two jacksockets - Mating with 75 & 79 fittings 101 thru thru [.200] short hexagonal turning jackset or crimping version 117: standard - Mating with 73 & 77 fittings - MI-T-55302/65 & /66 N: H 118: reversed - Mating with 74 & 78 fittings 119: two jackscrews - Mating with 76 & 80 fittings 120: two jacksockets - Mating with 75 & 79 fittings 117 thru 120 Important note - ll dimensions are in inch, except as otherwise specified. - ll the fittings are in passivated stainless except as otherwise specified.

14 Interconnect products 21 HIINX 2.54 >>> KEYING & GUIING () OKING Slotted turning jacksets 3.43 [.135] Xtrashort slotted turning jackset or right angle plug 89: standard - Mating with 73 & 77 fittings - MI-T-55302/57, /59 & /138 N: S 90: reversed - Mating with 74 & 78 fittings 91: two jackscrews - Mating with 76 & 80 fittings 92: two jacksockets - Mating with 75 & 79 fittings HiinX Series 89 thru 92 Standard Slotted turning jackset or straight plug and receptacle w/o crimp contacts 5.08 [.200] Short slotted turning jackset [.500] Medium slotted turning jackset [.700] ong slotted turning jackset ± 0.25 [±.010] 93 thru [.200] 81 thru [.500] 93: standard - Mating with 73 & 77 fittings - MI-T-55302/58, /60, /62, /63 & /139 N: S 94: reversed - Mating with 74 & 78 fittings 95: two jackscrews - Mating with 76 & 80 fittings 96: two jacksockets - Mating with 75 & 79 fittings 81: standard - Mating with 73 & 77 fittings - MI-T-55302/62 & /63 N: M 82: reversed - Mating with 74 & 78 fittings 83: two jackscrews - Mating with 76 & 80 fittings 84: two jacksockets - Mating with 75 & 79 fittings 85: standard - Mating with 73 & 77 fittings - MI-T-55302/62 & /63 N: 86: reversed - Mating with 74 & 78 fittings 87: two jackscrews - Mating with 76 & 80 fittings 88: two jacksockets - Mating with 75 & 79 fittings 85 thru [.700] 93 thru thru thru 88 rimping version, slotted turning jackset or crimping connector 5.08 [.200] Short slotted turning jackset [.500] Medium slotted turning jackset [.700] ong slotted turning jackset ± 0.25 [±.010] 121 thru [.200] 113 thru [.500] 109 thru [.700] 121: standard - Mating with 73 & 77 fittings - MI-T-55302/65 & /66 N: S 122: reversed - Mating with 74 & 78 fittings 123: two jackscrews - Mating with 76 & 80 fittings 124: two jacksockets - Mating with 75 & 79 fittings 113: standard - Mating with 73 & 77 fittings - MI-T-55302/66 N: M 114: reversed - Mating with 74 & 78 fittings 115: two jackscrews - Mating with 76 & 80 fittings 116: two jacksockets - Mating with 75 & 79 fittings 109: standard - Mating with 73 & 77 fittings - MI-T-55302/66 N: 110: reversed - Mating with 74 & 78 fittings 111: two jackscrews - Mating with 76 & 80 fittings 112: two jacksockets - Mating with 75 & 79 fittings 121 thru thru thru 112 Important note - ll dimensions are in inch, except as otherwise specified. - ll the fittings are in passivated stainless except as otherwise specified.

15 22 Interconnect products HIINX 2.54 >>> KEYING & GUIING () HiinX Series EIGNMENT BIITY In the longitudinal axis 1 [.039] In the lateral axis 1 [.039] MTING SEQUENE* Guiding Signal contact Mated connector 6.6 ± 0.1 [.260 ±.004] 5.6 ± 0.1 [.220 ±.004] 1.3 ± 0.1 [.051 ±.004] 1.3 ± 0.1 [.051 ±.004] * Except for crimp contacts. Backoff is 0.9 [.035] only for crimp contacts.

16 Interconnect products 23 HIINX 2.54 >>> SIGN VESION ONY OMTIBIITY WITH THE MI T /57 TO /66, /138 & /139 etailed sheets MI-T /57 to /66, /138 & /139 MI-T Series Number of contacts Type of contacts Hardware eviation omments MI-T-55302/57 HX2 2 10, 20, 30, 40, 50, 60, 70 14, 24, 44, 54 26, 36, 56, 66 MI-T-55302/59 HX2 2 90, 100, 120 = YS B = Y = Y = YS B = Y = Y X = 65 Y[-1 thru -64] = 01 thru 64 S = 89 H = 101 X = 65 Y[-1 thru -64] = 01 thru 64 = 73 S = 89 H = X = full round guides Y = -shaped S =.135 slotted turning jackset H =.135 hexagonal turning jackset X = full round guides Y = -shaped = fixed jackset S =.135 slotted turning jackset H =.135 hexagonal turning jackset HiinX Series MI-T-55302/138 HX = YS B = Y = Y X = 65 Y[-1 thru -64] = 01 thru 64 = 73 S = 89 H = X = full round guides Y = -shaped = fixed jackset S =.135 slotted turning jackset H =.135 hexagonal turning jackset MI-T-55302/61 HX2 2 10, 20, 30, 40, 50, 60, 70 14, 24, 44, 54 26, 36, 56, 66 = YS B = Y = Y Blank = Blank = fixed jackset MI-T-55302/58 HX2 2 10, 20, 30, 40, 50, 60, 70 14, 24, 44, 54 26, 36, 56, 66 = Z* B = YS = Y = W* E = Y* = Y X = 65 Y[-1 thru -64] = 01 thru 64 = 73 S = 93 H = X = full round guides Y = -shaped = fixed jackset S =.200 slotted turning jackset H =.200 hexagonal turning jackset MI-T-55302/60 HX2 2 90, 100, 120 = Z* B = YS = Y = W* E = Y* = Y X = 65 Y[-1 thru -64] = 01 thru 64 = 73 S = 93 H = X = full round guides Y = -shaped = fixed jackset S =.200 slotted turning jackset H =.200 hexagonal turning jackset MI-T-55302/139 HX = Z* B = YS = Y = W* E = Y = Y* H = Y* X = 65 Y[-1 thru -64] = 01 thru 64 = 73 S = 93 H = X = full round guides Y = -shaped = fixed jackset S =.200 slotted turning jackset H =.200 hexagonal turning jackset MI-T-55302/62 MI-T-55302/62 HX2 2 10, 20, 30, 40, 50, 60, 70 14, 24, 44, 54 26, 36, 56, 66 = Z* B = YS = Y = Y* E = Y = Y* = 85 M = 81 S = 93 H = =.700 slotted turning jackset M =.500 slotted turning jackset S =.200 slotted turning jackset H =.200 hexagonal turning jackset Without mounting ears MI-T-55302/64 MI-T-55302/64 HX2 2 10, 20, 30, 40, 50, 60, 70 14, 24, 44, 54 26, 36, 56, 66 = Z* B = YS = Y = W* E = Y* = Y* = 77 X = 69 Y[-1 thru -64] = 201 thru =.247 fixed jackset X =.247 full round guides Y =.247 -shaped Without mounting ears MI-T-55302/65 MI-T-55302/65 HX2 2 10, 20, 30, 40, 50, 60, 70 14, 24, 44, 54 26, 36, 56, 66 Blank = X X = 65 Y[-1 thru -64] = 01 thru 64 = 73 S = 121 H = X = full round guides Y = -shaped = fixed jackset S =.200 slotted turning jackset H =.200 hexagonal turning jackset MI-T-55302/66 MI-T-55302/66 HX2 2 10, 20, 30, 40, 50, 60, 70 14, 24, 44, 54 26, 36, 56, 66 Blank = X = 109 M = 113 = 73 S = 121 H = =.700 slotted turning jackset M =.500 slotted turning jackset = fixed jackset S =.200 slotted turning jackset H =.200 hexagonal turning jackset Without mounting ears * onsult us ll dimensions ll dimensions are given are given for information information only and only are and in are mm in [inch], inch, except as otherwise specified

17 24 Interconnect products HIINX 2.54 >>> SIGN ONTT VESION () TYI NGEMENTS 2 OWS n indicates the total number of signal contacts** HiinX Series 2-row signal contact receptacles, from 10 to 70 contacts* G I h E n = 10, 14, 16, 20, 24, 26, 30, 34, 36, 40, 44, 46, 50, 54, 56, 60, 64, 66, 70** n x E E G h 6.4 MX l 8.5 MX row signal contact plugs, from 10 to 70 contacts* h I G E n = 10, 14, 20, 24, 26, 30, 34, 36, 40, 44, 46, 50, 54, 56, 60, 64, 66, 70** n x E E G h 6.4 MX l 10.2 MX * in mm. 1mm = inch ** urther arrangements up to 160 contacts, with or without central fitting, are available, consult us

18 Interconnect products 25 HIINX 2.54 >>> SIGN ONTT VESION () YOUTS 2 OWS 2,54 2,54 The boards are shown from the connector side ll contact locations are equidistant. 1,27 n Y/YS/Y & Y ONTT (female for receptacle)* 2 OWS OM 10 TO 70 ONTTS** /2 /2 /4 /2 4 /4 2 1 n = 10, 14, 20, 24, 26, 30, 34, 36, 40, 44, 46, 50, 54, 56, 60, 64, 66, 70** n x HiinX Series n Y/YS/Y ONTT (male for plug)* 2 OWS OM 10 TO 70 ONTTS** h1 h0 p1 /2 4 1 n = 10, 14, 20, 24, 26, 30, 34, 36, 40, 44, 46, 50, 54, 56, 60, 64, 66, 70** n x p p/2 p/4 p h0 h [.100] 1.27 [.050] [.025] 3.05 [.120] To be defined by customer Hardware is not provided with connector Not compulsory 3.75 ± 0.1 [.150 ±.004] Ø 0.8 MIN [.031] With metallization [.325] 5.3 MX [.209] 1.27 [.050] *in mm. 1mm = inch ** urther arrangements up to 160 contacts, with or without central fitting, are available, consult us

19 26 Interconnect products HIINX 2.54 >>> SIGN ONTT VESION () TYI NGEMENTS 3 OWS n indicates the total number of signal contacts** 3-row signal contact receptacles, from 50 to 170 contacts* HiinX Series h E G n = 14, 26, 32, 38, 44, 50, 56, 62, 68, 74, 80, 86, 92, 98, 104, 110, 122, 134, 140, 146, 158, 170** (n 2) x 2.54 / E E G h 8.95 MX l I 3-row signal contact plugs, from 50 to 170 contacts* n = 14, 26, 32, 38, 44, 50, 56, 62, 68, 74, 80, 86, 92, 98, 104, 110, 122, 134, 140, 146, 158, 170** h G (n 2) x 2.54 / E E G h 8.95 MX l I *in mm. 1mm = inch ** urther arrangements up to 188 contacts, with or without central fitting, are available, consult us

20 Interconnect products 27 HIINX 2.54 >>> SIGN ONTT VESION () YOUTS 3 OWS 2,54 2,54 The boards are shown from the connector side ll contact locations are equidistant. 1,27 n 3 OWS OM 50 TO 170 ONTTS** Y/YS/Y & Y ONTT (female for receptacle or male for plug)* / n = 14, 26, 32, 38, 44, 50, 56, 62, 68, 74, 80, 86, 92, 98, 104, 110, 122, 134, 140, 146, 158, 170** (n 2) x 2.54 / HiinX Series n 3 OWS OM 50 TO 170 ONTTS** Y/YS/Y ONTT (male for plug)* h0 p1 p1 /2 4 1 n = 14, 26, 32, 38, 44, 50, 56, 62, 68, 74, 80, 86, 92, 98, 104, 110, 122, 134, 140, 146, 158, 170** (n 2) x 2.54 / p p/2 p h [.100] 1.27 [.050] [.125] To be defined by customer Hardware is not provided with connector Not compulsory 3.75 ± 0.1 [.150 ±.004] Ø 0.8 MIN [.031] With metallization [.325] 3.5 MIN [.138] * in mm: 1mm = inch ** urther arrangements up to 188 contacts, with or without central fitting, are available, consult us

21 28 Interconnect products HIINX 2.54 >>> HYBI VESION () IMENSIONS 2 OWS** s indicates the total number of special contacts. n indicates the total number of signal contacts HiinX Series ower contacts 20* s = 2, 4, 6 encombrement 2 rangées, avec cts puissance G n x s x n x 1.27 d2 d2 d3 d3 E E G H 6.4 MX 8.25 [.325] E d [.300] d [.175] d [.025] [ ] p/ [.050] d4 /2 /2 d4 H MHEUX TM contacts* d4 /2 /2 d4 H oaxial contacts* encombrement 2 rangées, avec coaxs d4 G d2 d2 d3 d3 /2 /2 E d4 H s = 2, 4, 6 n x s x n x 1.27 E E G H 6.4 MX 8.25 [.325] d [.300] d [.175] d [.025] [ ] p/ [.050] SOK contacts 70* lease consult us * in mm: 1mm = inch ** Hybrid modules will be preferably positionned on the connector sides

22 Interconnect products 29 HIINX 2.54 >>> HYBI VESION () YOUTS 2 OWS** 2,54 2,54 The boards are shown from the connector side ll contact locations are equidistant. 1,27 With Y/YS/Y & Y ONTT (female for receptacle)* WITH OWE ONTT d4 d2 d2 3 d3 d3 /2 d4 /2 4 n x s x n x HiinX Series WITH MHEUX TM ONTT 1 2 d4 /2 d3 d3 n x /2 4 d s x n x MIN M epending on s WITH OXI ONTT 1 d4 d2 d2 d3 d3 /2 / d4 n x s x n x YS/Y/Y & Y d 1 d 2 d 3 d p/2 p ower 8.25 [.325] 7.62 [.300] [.175] mphelux TM 6.61 MX [.260] 2.8 MX [.110] oaxial 8.25 [.325] 7.62 [.300] [.175] With Y/YS/Y ONTT (male for plug)* [.025] Not compulsory 3.75 ± 0.1 [.150 ±.004] 1.5 MIN [.059] Ø 0.8 MIN [.031] with metallization 1.27 [.050] 2.54 [.100] WITH OWE ONTT 20 1 h0 h2 3 d2 d2 1 h1 d3 d3 4 n x s x n x 1.27 WITH MHEUX TM ONTT 1 h0 h1 1 4 n x s x n x 1.27 WITH OXI ONTT 1 h0 h2 d2 d2 h1 4 d3 1 d3 4 n x s x n x s x n x 1.27 Y/YS/Y d 1 d 2 d p p 1 h 1 h 0 h 2 ower [.550] 7.62 [.300] [.175] See 1.5 MIN [.059] 5.8 [.228] Ø 0.8 MIN [.031] mphelux TM Nota MIN with metallization [.100] [.120] [.051] [.138] oaxial [.550] 7.62 [.300] [.175] below 3.39 [.133] Nota : to be defined by the customer. Hardware is not provided with connector. * in mm: 1mm = inch ** Hybrid modules will be preferably positionned on the connector sides

23 30 Interconnect products HIINX 2.54 >>> HYBI VESION () IMENSIONS 3 OWS** s indicates the total number of special contacts. n indicates the total number of signal contacts HiinX Series ower contacts 20* G d2 d2 d3 d3 d4 E H s = 2, 4, 6 (n 2) x 2.54 / s x n x E E G H 8.95 MX [.325] d [.300] d [.175] d [.275] [ ] p 2.54 [.100] MHEUX TM contacts* G d2 d4 d3 d3 E H s = 2, 4, 6 (n 2) x 2.54 / s x n x E E G H 8.95 MX 9.4 [.370] d2 6.6 [.260] d [.270] d [.440] [ ] p 2.54 [.100] oaxial contacts* G d2 d2 d3 d3 d4 E H s = 2, 4, 6 (n 2) x 2.54 / s x n x E E G H 8.95 MX [.325] d [.300] d [.175] d [.275] [ ] p 2.54 [.100] SOK contacts 70* lease consult us * in mm: 1mm = inch ** Hybrid modules will be preferably positionned on the connector sides

24 Interconnect products 31 HIINX 2.54 >>> HYBI VESION () YOUTS 3 OWS** 2,54 2,54 The boards are shown from the connector side ll contact locations are equidistant. With Y/YS/Y & Y ONTT (female for receptacle)* 1,27 WITH OWE ONTT 20 1 d2 d2 3 d3 d3 4 d4 2 (n 2) x 2.54 / s x n x HiinX Series WITH MHEUX TM ONTT 1 d3 d3 /2 4 2 (n 2) x 2.54 / s x n x MIN M epending on s WITH OXI ONTT 1 d2 d2 d3 d3 4 4 d4 3 (n 2) x 2.54 / s x n x YS/Y/Y & Y d 1 d 2 d 3 d p/2 p ower [.325] 7.62 [.300] [.175] [.275] Not compulsory mphelux TM 5.55 MX [.219] 3.0 MX [.118] 3.75 ± 0.1 oaxial [.325] 7.62 [.300] [.175] [.275] [.150 ±.004] With Y/YS/Y ONTT (male for plug)* 1.5 MIN [.059] Ø 0.8 MIN [.031] with metallization 1.27 [.050] 2.54 [.100] WITH OWE ONTT 20 1 h0 d2 d2 d3 d3 d4 h (n 2) x 2.54 / s x n x 1.27 WITH MHEUX TM ONTT 1 h (n 2) x 2.54 / s x n x 1.27 WITH OXI ONTT 1 h0 d2 d2 h1 d d3 4 d4 (n 2) x 2.54 / s x n x 1.27 Y/YS/Y d 1 d 2 d 3 d p p 1 h 1 h 0 ower [.550] 7.62 [.300] [.175] 12.7 [.500] See 1.5 MIN [.059] [.218] Ø 0.8 MIN [.031] mphelux TM Nota MIN with metallization [.100] [.120] [.209] oaxial [.550] 7.62 [.300] [.175] 12.7 [.500] below [.123] Nota : to be defined by the customer. Hardware is not provided with connector. * in mm: 1mm = inch ** Hybrid modules will be preferably positionned on the connector sides

25 32 Interconnect products HiinX Series HIINX >>> GENE SEIITIONS Main characteristics High density: 0.16 cts / mm² [103 cts / inch²] rom 2 to 3 rows, 10 to 206 signal contacts 3 per signal contact (up to 5 current rating available upon request) ress-fit solderless attachment technology available Some signal contact versions are 100% compatible with the M55302 /190 to /193. HIGH ENSITY unique connector, both hybrid and modular ost effective, easy to install, highly reliable More current through each contact Greater performance and optimal protection in harsh environments ompatible with signal connectors on the market (MI-T-55302/190 to /193) 1.905[.075] staggered grid (0.9525[.0375] offset), 1.905[.075] between rows Markets Main applications Terminationsns ecommended configurations Special contacts Standard MI- MI-T /190 to /193 How to order Type of contacts? eceptacle emale Male lug onnector type 2 3 Number of rows emale Male escription YS ight angle tail short 2.8 [.110] onsult us Y ight angle tail standard 3.5 [.140] Y ight angle tail long 4.4 [.172] YS YS Straight tail short 2.8 [.110] Y Y Straight tail standard 3.5 [.140] Y Y Straight tail long 4.4 [.172] Y / ress fit Z Z Solder up onsult us SMT Solder tail for flexible circuit Signal modules contact termination type (see pages 34 to 37) HX lating Blank: Standard plating : ead free plating for ohs connector Number of Signal contacts (see pages 46 to 49) 2 rows 3 rows Signal version Hybrid version N/ To be defined. ivided by 9 or 12 Special module * (see page 38) Male emale OWE 20** M1 1 SOK 70*** M2 2 OXI** M1 1 MHEUX ** XM X ** 2 contacts or cavities per module *** 1 cavity per module Number of special module (X) + type of the module (XXX) X XXX (blank = signal contacts only) Ex: 2M1 3M1 2 male power modules and 3 male coaxial modules Keying, guiding, locking -shape guides? ound guides? 01 by default (see pages 40 to 44) Important note - SOK, coaxial and mphelux contacts have to be ordered separately - * Special modules are available for 3-row connectors only YES YES 01 to 64 according to MI T to 68 69* to 72* YES ocking? 73* to 108* Standard? eviation YES NO - onsult us * w/o mouting ears -200* with middle fitting * with middle fitting by w/o mouting ears default -800* monolithic version w/o mouting ears -900* monolithic version

26 Interconnect products 33 HIINX >>> TEHNI SEIITIONS imensional characteristics X B e d H = 7.62 MX [.300] = 5.12 MX [.202] for 2-row connectors = 7 MX [.276] for 3-row connectors B = X [ X] for 2-row connectors B = X [ X] for 3-row connectors X = Board thickness + hardware thickness d = MX [.600] e = 1.8 [.071] to 3.4 [.134] or 2.5 MIN [.098] (for Y contacts) HiinX Series emale contact Male contact Starclip female technology: 6 tines for better reliability 6 contact tines instead of 4 Excellent mechanical and electrical reliability Better resistance to high vibrations Improved electrical conductivity 100% compatible with other connectors Material Hood: machined brass alloy Starclip: ube[beu], stamped and formed lating Hood: tin lead or lead free Starclip: gold over nickel Mating end diameter: Ø [.025] ontact section (mating side): 0.32 mm² [.0005 in²] Material: machined brass alloy lating: gold over nickel Materials Guiding devices: electroless nickel plating over brass uzn or passivated stainless steel 303 ails: passivated stainless steel 316 lastic insert: thermoplastic, 30% glass-fiber filled MEHNI HTEISTIS MI-T sections Backoff 1 (mm) 0.8 MX [.031] N/ Mating force per contact (N) 0.85 MX Unmating force per contact (N) 0.35 < < urability cycles Sinusoidal vibrations (10 to 2000 Hz) micro discontinuity 2ns 15 g andom vibrations (5 to 2000 Hz) micro discontinuity 2ns 0.5 g² / Hz Shocks 6ms ½ sinus 2ns 100 g ENVIONMENT HTEISTIS Thermal shocks ( ) -65 / Salt Spray (hours) Humidity ays 10 Temperature ( ) 25/ Humidity rate (%) EETI HTEISTIS urrent rating per contacts () 3* Insulation resistance (at 500Vdc) (GΩ) 5 MIN ontact resistance (mω) 10 MX ielectric Withstanding Voltage (Vrms) 750 MIN : When both connectors are fully mated, the backoff is the maximum distance the connectors can be unmated while functioning properly * Other, please consult us

27 34 Interconnect products HIINX >>> SIGN ONTTS () EME ONTTS O EETES HiinX Series Starclip female technology - 6 contact tines instead of 4 - Excellent mechanical and electrical reliability - Better resistance to high vibrations - Improved electrical conductivity - 100% compatible with other connectors - Size 23: high average current - lip for male contact ø [.025] - lating on active part (clip) u Ni u 1 [.039] 3.5 [.138] 1.3 [.051] ress-fit Solder cup* - Solderless assembly - Mother board or mezzanine connection - B thickness: 2.5 MIN [.098] - Insertion forces: 65 N typical - Hard soldering on wire - Mother board for cable to board connection - Solder cup for 24 to 28 WG wire Termination style Y onsult us Z SMT* Soldering on flex* - SMT soldering - Hard soldering on flexible circuit - B thickness: specific, consult us - B thickness: specific, consult us onsult us T onsult us Y 3 [.118] Ni + 10 [.394] Sn b Y Z* T* Y* MX 2.8 ± 0.2 [.110 ±.008] 5.5 ± 0.2 [.217 ±.008] ± 0.2 [.073] [.094 ±.008] Termination section Ø 0.82 [.032] Ø 0.75 MX [.030] Ø 0.51 MX [.020] 2 [.079] Ni electrolytic + Barrel standard 15.2 [.598] Ni electroless + termination plating µm [µin] 10 [.394] Sn b Barrel ohs termination plating* µm [µin] N/ 2.5 [.089] Ni + 5 [.197] bright pure Sn * onsult us

28 Interconnect products 35 HIINX >>> SIGN ONTTS () EME ONTTS O EETES Short straight tail - Mother board or mezzanine connection - B thickness: 1.8 MX [.071] Standard straight tail - Mother board or mezzanine connection - B thickness: 2.5 MX [.098] HiinX Series Termination style YS Termination style Y ong straight tail Short right angle tail* - Mother board or mezzanine connection - Extender card - B thickness: 3.5 MX [.138] - B thickness: consult us Termination style Y onsult us YS Standard right angle tail* ong right angle tail* - Extender card - Extender card - B thickness: consult us - B thickness: consult us onsult us Y onsult us Y YS Y Y YS* Y* Y* 2.8 ± ± ± 0.2 MX [.110 ±.008] [.140 ±.008] [.172 ±.008] onsult us Termination section Ø 0.51 MX [.020] Barrel standard termination plating µm [µin] 3 [.118] Ni + 10 [.394] Sn b Barrel ohs termination plating* µm [µin] 2.5 [.089] Ni + 6 [.197] bright pure Sn * onsult us

29 36 Interconnect products HIINX >>> SIGN ONTTS () ME ONTTS O UGS HiinX Series Short right angle tail - aughter board or extender card - B thickness: 1.8 MX [.071] Standard right angle tail - aughter board or extender card - B thickness: 2.5 MX [.098] Termination style YS Termination style Y ong right angle tail Soldering on flex* - aughter board or extender card - B thickness: 3.5 MX [.138] - Hard soldering on flexible circuit - SMT connection - B thickness: consult us Termination style Y onsult us Y YS Y Y Y* MX 2.8 ± 0.2 [.110 ±.008] 3.5 ± 0.2 [.140 ±.008] Termination section Ø 0.51 MX [.020] 4.4 ± 0.2 [.172 ±.008] 2.4 ± 0.2 [.094 ±.008] Mating end diameter Ø ± 0.02 [.025 ±.001] lating µm [µin] 1 [.039] u [.138] Ni [.051] u * onsult us

30 Interconnect products 37 HIINX >>> SIGN ONTTS () ME ONTTS O UGS Short straight tail* - aughter board or mezzanine connection - B thickness: 1.8 MX [.071] Standard straight tail* - aughter board or mezzanine connection - B thickness: 2.5 MX [.098] HiinX Series onsult us YS onsult us Y ong straight tail* Solder cup* - aughter board or mezzanine connection - B thickness: 3.5 MX [.138] - Hard soldering on wire - aughter board for cable to board connection - Solder cup for 24 to 28 WG wire onsult us Y onsult us Z YS* Y* Y* Z* MX 2.8 ± 0.2 [.110 ±.008] 3.5 ± 0.2 [.140 ±.008] 4.4 ± 0.2 [.173 ±.008] 5 MX ± 0.2 [.197 ±.008] Termination section Ø 0.51 MX [.020] Ø 0.8 MX [.032] Mating end diameter Ø ± 0.02 [.025 ±.001] lating µm [µin] 1 [.039] u [.138] Ni [.051] u * onsult us

31 38 Interconnect products HIINX >>> SEI ONTTS () HYBI MOUES O 3-OW ONNETOS* OWE contacts HiinX Series Straight female power module - Mother board - 2 straight female contacts - 20 / contact - B thickness: 1.8 [.071] to 3.4 [.134] - Termination section Ø 1.4 MX [.055] ight angle male power module B B - aughter board - 2 right angle male contacts - 20 / contact - B thickness: 1.8 [.071] to 3.4 [.134] - Termination section: Ø 1.2 MX [.047] Module designation 1 Module designation M1 SOK contacts emale cavity module for SOK contact - 1 cavity for male SOK contact - Mother board - 70 / contact - Termination section: the body shape, the section and the length of the termination are specific to your need: consult us ight angle male SOK contact - ixing with retainer - aughter board - 1 male SOK contact - 70 / contact - H: the body shape, the section and B H the length of the termination are specific to your need: consult us B H Module designation 2 Module designation M2 MHEUX IN 801 termini emale amphelux module Male amphelux module - 2 amphelux termini - Multimode - Modules are supplied less contacts, consult us - omplied with the IN 801 specification - Keyed to provide anti-rotation - 2 amphelux termini - Multimode - Modules are supplied less contacts, consult us - omplied with the IN 801 specification - Keyed to provide anti-rotation Module designation X Module designation XM 1 2 M1 M2 X XM 4.1 ± 0.2 [.161 ±.008] 7.62 MX [.300] 2.8 ± 0.2 [.110 ±.008] 3.5 ± 0.2 [.140 ±.008] 4.4 ± 0.2 [.172 ±.008] 28.5 ± 0.2 [1.122 ±.008] 23.6 ± 0.2 [.929 ±.008] B 6.5 [.256] 8.23 [.324] 10.1 MX [.398]

32 Interconnect products 39 HIINX >>> SEI ONTTS () HYBI MOUES O 3-OW ONNETOS* OXI contacts Straight female coaxial module - Mother board or mezzanine connection - 2 cavities for straight coaxial female contacts - or more information, consult us - Modules are supplied less contacts Module designation Straight male coaxial module - Mezzanine connection - 2 cavities for straight coaxial male contacts - or more information, consult us - Modules are supplied less contacts Module designation 1 M041 HiinX Series ight angle female coaxial module ight angle male coaxial module - Extended card - 2 cavities for right angle coaxial female contacts - or more information, consult us - Modules are supplied less contacts - aughter board or extended card - 2 cavities for right angle coaxial male contacts - or more information, consult us - Modules are supplied less contacts Module designation M1 032 Module designation M1 M032 TEHNI HTEISTIS Impedance (Ω) 50 Voltage rating (V MS) 180 urrent rating (m) 500 ontact retention (N) 50 MIN requency range (GHz) 0 to 1 ontact resistance (mω) 12 MX SW (at 1 GHz) 1.3 Insertion and extraction force per contact (N) 1 15 * Hybrid modules will be preferably positioned on the connector sides

33 40 Interconnect products HIINX >>> KEYING & GUIING () U OUN GUIES HiinX Series Standard d or receptacle: d - 1 female socket and 1 male pin - Non keying - Nickel over brass - Mating with 65 or 69 keying - MI-T N: X eversed d or receptacle: d - 1 male pin and 1 female socket - Non keying - Nickel over brass - Mating with 66 or 70 keying ontact #1 65 ontact #1 66 Two male guide pins d d Two female guide sockets d d - 2 male guide pins - Non keying - Nickel over brass - Mating with 68 or 72 keying - 2 female guide sockets - Non keying - Nickel over brass - Mating with 67 or 71 keying ONG U OUN GUIES ong - 1 female socket and 1 male pin - Non keying - Nickel over brass - Mating with 69 or 65 keying ong reversed - 1 male pin and 1 female socket - Non keying - Nickel over brass - Mating with 70 or 66 keying ong, two male guide pins ong, two female guide sockets - 2 male guide pins - Non keying - Nickel over brass - Mating with 72 or 68 keying - 2 female guide sockets - Non keying - Nickel over brass - Mating with 71 or 67 keying Non keying male pin guide Non keying female socket guide Keying male pin guide Keying female socket guide d 2.7 ± 0.2 [.106 ±.008] Important note ll dimensions are in inch, except as otherwise specified.