A smile ahead. Silagum. The right solution for all impression techniques

Transcription

1 A smile ahead. Silagum The right solution for all impression techniques

2 The right solution for all impression techniques Silagum has been known for years as a proven and reliable impression material based on VPS. Each single product of the Silagum line is characterized by its exceptional material properties and ease of use. Silagum s hydrophilicity and thus improved wettability yields a pinsharp reproduction of subgingival areas. From Handmix over automatically mixing to fully automatic mixing with the MixStar system, products are available in a wide variety of application forms. Silagum offers the right solution for any technique and use.

3 in % 1,6 1,4 1,2 1,0 0,8 0,6 0,4 0,2 0 Compression set Silagum-Putty Putty A Putty B Compression set of Silagum-Putty. Impression with Silagum-Putty Soft and Silagum- Light. Safety cartridge with separate openings. Excellent recovery after deformation Very good hydrophilicity Safety cartridge Due to its high elasticity, Silagum exhibits a very good recovery after deformation, i.e. an extremely low compression set. It is also this high elasticity that makes removal from the mouth so easy. Any deformation that occurs upon removal safely recovers, thus ensuring precise dimensional reproduction. Through its high surface wettability, Silagum provides for an optimal adaptation to dental hard substances and the mucous membrane in a wet oral environment. Combined with the flowable viscosity, subgingival areas are precisely reproduced resulting in pin-sharp impressions, even of finest surface details. Silagum is available in the fully automatic Mix- Star and the handy Automix system. The Automix cartridge system offers the following advantages: No cross-contamination thanks to distinctly separate openings of the cartridges Easier dispensing and extrusion of the material due to the improved power transmission of the gun Ensured hygiene since the gun can be sterilized in autoclaves The Automix and MixStar cartridges mix the material automatically in a consistently high quality, homogeneous and bubble-free. Silagum is also available in the, over many years proven application form of a handmix in tubes and jars respectively. Patient Friendly Neutral taste and color Minimizes patient complaints Biocompatible Well tolerated by both the patient and the dentist Optimal adjusted elasticity and tear strength Easy removal from mouth Perfect Material Properties Finest detail accuracy Basis of perfectly fitting restorations Flowable viscosity Reliable reproduction of the preparation margin High contrast colors Very good readability Outstanding Handling Properties Variety of working times Individual timing Automatic mixing Continuously homogeneous and bubble-free material quality

4 A smile ahead. Silagum-MixStar Putty Soft Pre-impression with Silagum-Putty. Silagum-Light Silagum-Light Fast Syringing the preparation with Silagum- Light. Silagum-Putty Pre-impression material based on VPS in the MixStar cartridge and in the traditional putty jars. Silagum-Light Proven correction material based on VPS. The final hardness of Silagum- MixStar Putty Soft in the MixStar cartridge is adjusted for both an easy removal from the mouth, even with the use of Rimlock trays, and reliable application of correction techniques. The kneadable pre-impression material Silagum-Putty in the traditional jar is available in three different types. Crown and bridge impressions, inlay and onlay impressions Exceptional dimensional stability Snap-set behavior Easy and mess-free handling Excellent recovery after deformation of the MixStarcartridge Direct application into the tray The ready-to-use prefilled MixStar-cartridge can be used in the DMG MixStar and in the 3M ESPE Pentamix Easy and mess-free handling Consistently homogenous and bubble-free material quality Easy and safe removal The use of Silagum-Light as the second phase of the correction technique or the double mixing technique ensures a precise impression of the marginal area of the preparation. Silagum-Light exhibits a convenient viscosity that simplifies the application, but at the same time ensures safe handling by the user. Crown and bridge impressions, inlay and onlay impressions Good hydrophilicity Flowable viscosity Available in two versions: regular and fast set Silagum-Putty Fast 1:15 2:30 Silagum-Putty Standard/Soft Erhärtungszeit 1:45 3:30 Silagum-Automix Light Fast 1:30 Silagum-MixStar Putty Soft Silagum-Light Erhärtungszeit Mundverweildauer 2:00 3:30 3:30

5 A smile ahead. Monophase impression material based on VPS. is the material of choice for one-phase and onestep impressions. It is extremely suitable for fixation impressions and also for impressions of crown and bridge preparations. Inlay and onlay impressions, functional impressions Silagum-Automix Mono 1:30 Precision impression with Reproduces the finest details owing to excellent flow properties Easy and precise application with Intraoral-Tips Remains firm in the tray and on the preparation Tube material has slight mint flavor 2:30 Fast Medium viscosity impression material based on VPS. Owing to its consistency of medium viscosity, Silagum- Medium can be used in many ways. It is equally suitable as a correction impression material for two-phase impressions and as the sole material for relining impressions. Inlay and onlay impressions, relining and functional impressions, pressure-spot indicator Excellent flow properties Available in two versions: regular and fast set Silagum-Automix Medium Fast Silagum-Handmix Mono Mundverweildauer Erhärtungszeit 2:30 3:30 3:30 1:30 Pre-impression material based on addition curing silicones, available in MixStar cartridges and traditional Putty jars. Proven correction material based on addition curing silicones, available in safety cartridges and tubes. Monophase impression material based on addition curing silicones, available in safety cartridges and tubes. Medium-viscosity impression material based on addition curing silicones, available in safety cartridges and tubes. Silagum-Putty Silagum-Light

6 Packaging Silagum-Putty Silagum-Light ml 10 MixStar-Tips REF ml 50 MixStar-Tips REF MixStar-Tips REF MixStar mixing unit 230 V int. REF MixStar mixing unit 115 V int. REF ml base- and catalystpaste Putty Standard REF Putty Fast REF Putty Soft REF ml Putty Standard REF Putty Fast REF Putty Soft REF Bulk Pack ml Putty Standard REF Putty Soft REF ml 12 Automix-Tips 12 Intraoral-Tips Light REF Light Fast REF ml 50 Automix-Tips 50 Intraoral-Tips Light REF Light Fast REF ml 1 Mixing pad 1 Spatula REF ml 2 Mixing pads 2 Spatulas REF Automix-Dispenser Type 50 1:1 REF Automix-Tips Yellow 1:1 REF Intraoral-Tips REF ml Tray Adhesive REF ml 12 Automix-Tips 12 Intraoral-Tips REF ml 50 Automix-Tips 50 Intraoral-Tips REF ml 1 Mixing pad 1 Spatula REF ml 2 Mixing pads 2 Spatulas REF Automix-Dispenser Type 50 1:1 REF Automix-Tips Yellow 1:1 REF Intraoral-Tips REF ml Tray Adhesive REF Refill 2 50 ml 12 Automix-Tips 12 Intraoral-Tips Medium REF Medium Fast REF ml 1 Mixing pad 1 Spatula REF Automix-Dispenser Type 50 1:1 REF Automix-Tips Yellow 1:1 REF Intraoral-Tips REF ml Tray Adhesive REF Sphere A smile ahead. Elbgaustraße Hamburg Germany Fon: +49. (0) Fax: +49. (0) info@dmg-dental.com PB SG E