H/HC Type Pressure Control Valves

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "H/HC Type Pressure Control Valves"

Transcription

1 PRSSUR ONTROLS H/H Type Pressure ontrol Valves These valves are hydraulically damped, direct operated, pressure control valves which can be actuated by internal or external pilot pressure. H Type Pressure ontrol Valves There are various types of valve including sequence, unloading and low pressure relief valves, all of which are operated by a pressure rise in the circuit, sensed either internally or remotely. H Type Pressure ontrol Valves They are available with integral check valves for use when free reverse flow from secondary port to the primary port is desired. There are various types of valve including sequence and counterbalance valves, all of which are operated by a pressure rise in the circuit, sensed either internally or remotely. H/HType Pressure ontrol Valves Specifications Series Threaded onnection Mounting Max. Operating Pres. MPa (PSI) Max. Flow L/min (U.S.GPM) pprox. Mass kg (lbs.) Threaded onnection Mounting H Type Pressure ontrol Valves HT-3- ** - * -//9 HT-6- ** - * -//9 HT-- ** - * -//9 HG-3- ** - * -/9 HG-6- ** - * -/9 HG-- ** - * -/9 (35) 5 (3.) 5 (33) 5 (66) 3.7 (.) 6. (3.7). (6.5). (.) 6. (3.5). (.3) H Type Pressure ontrol Valves HT-3- ** - * -//9 HT-6- ** - * -//9 HT-- ** - * -//9 HG-3- ** - * -/9 HG-6- ** - * -/9 HG-- ** - * -/9 (35) 5 (3.) 5 (33) 5 (66). (9.) 7. (5.7) 3. (3.). (.6) 7. (6.3) 3. (3.) For check valve pressure drops of H type, see free flow pressure drop characteristics described on page 7. Yuken can offer flanged connection valves described below. For details, contact us. Max. Operating Pressure MPa (PSI) Max. flow L/min (U.S.GPM) HF/HF-- ** - * -/9 HF/HF-6- ** - * -/9 (35) 5(66) 5(3) 37

2 Model Number Designation F- H T Special Seals F: Special Seals for Phosphate ster Type Fluids (Omit if not required) Series Number H: H Type Pressure ontrol Valves H: H Type Pressure ontrol Valves Type of Mounting T: Threaded onnection G: Mounting T: Threaded onnection G: Mounting -3 Valve Size P - * Pres. dj. Range MPa (PSI) L: (36-65) M: (65-3) N:.9 -. (3-6) : (6-5) : (5- ) : 7. - ( - 3) Valve Type 3 3 With uxiliary Pilot Pressure P: With uxiliary Pilot Pressure 3 Design Number Design Standards None: Japanese Std. "JIS" : uropean Design Std. 9: N. merican Design Std. None: Japanese Std. "JIS" & uropean Design Std. 9: N. merican Design Std. None: Japanese Std. "JIS" : uropean Design Std. 9: N. merican Design Std. None: Japanese Std. "JIS" & uropean Design Std. 9: N. merican Design Std.. For the details of valve types, see the following page.. Type is only possible for pressure adjustment ranges L and M. 3. Models with auxiliary pilots are used where valves must be operated under a lower external pilot pressure than the adjusted pressure (types N,, and : about / of adjusted pressure; type : about /6). This does not apply to pressure adjustment ranges L and M and valve type. Instructions To adjust the pressure, loosen the lock nut and turn the pressure adjustment screw slowly clockwise to increase pressures or anti-clockwise to decrease pressures. fter adjustments, do not forget to tighten the lock nut. onnect the secondary side pressure ports of types and (internal drain) and the drain ports of types and 3 (external drain) directly to the reservoir with a back pressure close to the atmospheric pressure. There are two threaded connection primary pressure ports. They can be connected each other in-line; one as inlet and the other as an outlet or the valve can be used by plugging one of the pressure ports. Valve Model Numbers Japanese Standard "JIS" Thread Size uropean Design Standard Thread Size N.merican Design Standard Thread Size pprox. Mass kg (lbs.) HG -3- HG ** HGM-3- HGM-3X- Rc 3/ Rc / HGM-3- HGM-3X- 3/ / HGM-3-9 HGM-3X-9 3/ NPT / NPT.6 (3.5).6 (3.5) HG -3- HG ** -P HGM-3-P- HGM-3X-P- Rc 3/ Rc / HGM-3-P- HGM-3X-P- 3/ / HGM-3-P-9 HGM-3X-P-9 3/ NPT / NPT. (.). (.) HG -6- HG ** HGM-6- HGM-6X- Rc 3/ Rc HGM-6- HGM-6X- 3/ HGM-6-9 HGM-6X-9 3/ NPT NPT. (5.3) 3. (6.6) HG -6- HG ** -P HGM-6-P- HGM-6X-P- Rc 3/ Rc HGM-6-P- HGM-6X-P- 3/ HGM-6-P-9 HGM-6X-P-9 3/ NPT NPT. (5.3) 3. (6.6) HG -- HG ** HGM-- HGM-X- Rc -/ Rc -/ HGM-- HGM-X- -/ -/ HGM--9 HGM-X-9 -/ NPT -/ NPT. (.6) 5.7 (.6) HG -- HG ** -P HGM--P- HGM-X-P- Rc -/ Rc -/ HGM--P- HGM-X-P- -/ -/ HGM--P-9 HGM-X-P-9 -/ NPT -/ NPT. (.6) 5.7 (.6) s are available. Specify the sub-plate model number from the table above. When sub-plates are not used, the mounting surface should have a good machined finish. 3

3 PRSSUR ONTROLS ttachment Mounting olts Valve Model Numbers Socket Head ap Screw Japanese Std. "JIS" and uropean Design Std. N. merican Design Std. HG-3 M 5 Lg. 3/ -6 UN Lg. HG-6 M 5 Lg. 3/ -6 UN Lg. HG- M 5 Lg. 3/ -6 UN Lg. 6 HG-3 M 7 Lg. 3/ -6 UN -3/ Lg. HG-6 M Lg. 3/ -6 UN 3-/ Lg. HG- M 9 Lg. 3/ -6 UN 3-/ Lg. 6 Qty. Valve Types H Type Valve Type Pilot-Drain Type Operations Type : Low Pres. Relief Valve Internal Pilot-Internal Drain Type : Sequence Valve Internal Pilot-xternal Drain Type 3: Sequence Valve xternal Pilot-xternal Drain Type : Unloading Valve xternal Pilot-Internal Drain H/HType Pressure ontrol Valves Graphic Symbols With auxiliary pilot port With auxiliary pilot port With auxiliary pilot port Description an be used as lowpressure relief valve, but be careful to occurrence of surge pressure. Used to control the operational sequence of two or more actuators. If primary pressure exceeds the pressure setting, effective fluid is delivered to the secondary side. Used for the same purpose as for the type. Operated by external pilot pressure irrespective of primary pressure. Used as unloading valve. If external pilot pressure exceeds the pressure setting, the pump is turned no-load by releasing all fluid to the tank. H Type Valve Type Pilot-Drain Type Type : ounterbalance Valve Internal Pilot-Internal Drain Type : Sequence and heck Valve Internal Pilot-xternal Drain Type 3: Sequence and heck Valve xternal Pilot-xternal Drain Type : ounterbalance Valve xternal Pilot-Internal Drain Operations Graphic Symbols With auxiliary pilot port With auxiliary pilot port With auxiliary pilot port With auxiliary pilot port Descriptions Used to prevent gravitational falls by generating a pressure on the actuator return side. If primary pressure exceeds the pressure setting, fluid is released to keep the pressure constant. Used to control the operating sequence of two or more actuators. If primary pressure exceeds the pressure setting, effective fluid is delivered to the secondary side. Reversed flow is free by a check valve. Used for the same purpose as for type. Operated by external pilot pressure irrespective of primary pressure. Reversed flow is free by a check valve. Used for the same purpose as for type. Operated by external pilot pressure irrespective of primary pressure. Reversed flow is free by a check valve. 39

4 HT-3, 6, -** - * -//9 Type 3: Sequence Valve (xternal Pilot, xternal Drain) ""SQ. Lock Nut 3 (.5) Hex. D Pressure djustment Screw (.39) Hex. IN. HT-3, HT-6, HT-, HT-3, HT-6, HT-, HT-3, 9 HT-6, 9 HT-, 9 "Q" Thd. Rc 3/ Rc 3/ Rc -/ 3/ 3/ -/ 3/ NPT 3/ NPT -/ NPT DIMNSIONS IN MILLIMTRS (INHS) Thread Size Rc / / / NPT "T" Thd. Rc / / SP.Tr / NPT Outlet Port "Q" Thd. N Fully xtended Gauge onnection "T" Thd. V L Primary Pressure Gauge onnection "T" Thd. xternal pilot port "X" J F Primary Pressure Inlet Port "Q" Thd. ux. Pilot Port "Y" (For "P" models only) D Dimensions mm (Inches) F J L N V HT-3 (.6) (3.3) 6 (.36) 7 (.9) 9 (7.5) 57 (.) 3 (.69) 7 (.76) () (.) (.) HT-6 (.9) 96 (3.7) 73 (.7) 7 (3.3) (.7) 6.5 (.5) 5.5 (.99).5 (3.7) 9 (.35) 33 (.3) (.65) HT- 66 (.6) 3 (5.) 6 (3.39) (.) 7 (.7) (3.3) 66 (.6) 9 (3.6) (.7) (.57) 5 (.5) Type : Low Pressure Relief Valve (Internal Pilot, Internal Drain) Type : Sequence Valve (Internal Pilot, xternal Drain) Type : Unloading Valve (xternal Pilot, Internal Drain) xternal Pilot Port

5 PRSSUR ONTROLS HG-3, 6-** - * -/9 Type 3: Sequence Valve (xternal Pilot, xternal Drain) "" SQ. Mounting Surface HG-3: ISO 57-G-6-- HG-6: ISO 57-H--- Type : Low Pressure Relief Valve (Internal Pilot, Internal Drain) Fully xtended F Lock Nut 3 (.5) Hex. J ux. Pilot Port "Y" (For "P" models only) D Pressure djustment Screw (.39) Hex. IN. Outlet Port (.3) Dia. Through 7.5(.69) Dia. Spotface xternal Pilot Port "X" Primary Pressure Inlet Port 6(.) Locating Pin 6(.) Dia. Mounting Surface (O-Rings Furnished) Type : Sequence Valve (Internal Pilot, xternal Drain) Type : Unloading Valve (xternal Pilot, Internal Drain) H/HType Pressure ontrol Valves Dimensions mm (Inches) D F J HG-3 HG-6 6 (.36) 73 (.7) 67 (.6) 79 (3.) 35 (.3) (.57) 39 (.5) 39 (.5) 9 (3.5) (.) 9 (7.5) (.7) (.95) 5 (.) 3 (.5) 3 (.5) xternal Pilot Port HG--** - * -/9 Type 3: Sequence Valve (xternal Pilot, xternal Drain) 39 (.5) 6(3.39) SQ. Mounting Surface ISO 57-J--- DIMNSIONS IN MILLIMTRS (INHS) Type : Low Pressure Relief Valve (Internal Pilot, Internal Drain) 6 (.) 9 (3.6) Pressure djustment Screw (.39) Hex. IN. Type : Sequence Valve (Internal Pilot, xternal Drain) Lock Nut 3(.5) Hex. Outlet Port Fully xtended 7(.7) (.3) Dia. Through 7.5(.69) Dia. Spotface 6 (.) Locating Pin 6(.) Dia. Type : Unloading Valve (xternal Pilot, Internal Drain) 6 (.) ux. Pilot Port "Y" (For "P" models only) 9 (.69) xternal Pilot Port "X" Primary Pressure Inlet Port 3 (.5) Mounting Surface (O-Rings Furnished) xternal Pilot Port

6 HT-3, 6, -** - * -//9 Type 3: Sequence and heck Valve (xternal Pilot, xternal Drain) ""SQ. D Pressure djustment Screw (.39) Hex. IN. HT-3, HT-6, HT-, HT-3, HT-6, HT-, HT-3, 9 HT-6, 9 HT-, 9 "Q" Thd. Rc 3/ Rc 3/ Rc -/ 3/ 3/ -/ 3/ NPT 3/ NPT -/ NPT DIMNSIONS IN MILLIMTRS (INHS) Thread Size Rc / / / NPT "T" Thd. Rc / / SP.Tr / NPT Lock Nut 3 (.5) Hex. Outlet Port or Reversed Free Flow Inlet Port "Q" Thd. N Fully xtended "" Gauge onnection "T" Thd. V Primary Pressure Gauge onnection "T" Thd. xternal Pilot Port "X" J F L Primary Pressure Inlet Port or Reversed Free Flow Outlet Port "Q" Thd. ux. Pilot Port "Y" (For "P" models only) D Dimensions mm (Inches) F J L N V HT-3 (.6) (3.3) 6 (.36) 96 (3.7) 9 (7.5) 57 (.) 3 (.69) 7 (.76) () (.) (.) HT-6 (.9) 96 (3.7) 73 (.7) 6 (.57) (.7) 6.5 (.5) 5.5 (.99).5 (3.7) 9 (.35) 33 (.3) (.65) HT- 66 (.6) 3 (5.) 6 (3.39) 5 (5.9) 7 (.7) (3.3) 66 (.6) 9 (3.6) (.7) (.57) 5 (.5) Type : ounterbalance Valve (Internal Pilot, Internal Drain) Type : Sequence and heck Valve (Internal Pilot, xternal Drain) Type : ounterbalance Valve (xternal Pilot, Internal Drain) xternal Pilot Port

7 PRSSUR ONTROLS HG-3, 6-** - * -/9 Type 3: Sequence and heck Valve (xternal Pilot, xternal Drain) Mounting Surface HG-3: ISO 57-G-6-- HG-6: ISO 57-H--- Type : ounterbalance Valve (Internal Pilot, Internal Drain) Fully xtended "F" J uxiliary Pilot Port (For "P" models only) "D" SQ. Pressure djustment Screw (.39) Hex. IN. Outlet Port or Reversed Free Flow Inlet Port (.3) Dia. Through 7.5(.69) Dia. Spotface xternal Pilot Port "X" Primary Pressure Inlet Port or Reversed Free Flow Outlet Port Lock Nut 3(.5) Hex. 6(.) Locating Pin 6(.) Dia. Mounting Surface (O-Rings Furnished) Type : Sequence and heck Valve (Internal Pilot, xternal Drain) Type : ounterbalance Valve (xternal Pilot, Internal Drain) H/HType Pressure ontrol Valves Dimensions mm (Inches) D F J HG-3 HG-6 9 (3.5) (.5) 59 (.3) 69 (.7) 35 (.3) (.57) 6 (.36) 73 (.7) 9 (3.5) (.) 9 (7.5) (.7) (.95) 5 (.) 5 (.) 6 (.6) xternal Pilot Port HG--** - * -/9 Type 3: Sequence and heck Valve (xternal Pilot, xternal Drain) Mounting Surface ISO 57-J--- DIMNSIONS IN MILLIMTRS (INHS) Type : ounterbalance Valve (Internal Pilot, Internal Drain) 3 (5.) 79 (3.) 6 (.) 6 (3.39) SQ. Pressure djustment Screw (.39) Hex. IN. Lock Nut 3(.5) Hex. Type : Sequence and heck Valve (Internal Pilot, xternal Drain) Outlet Port or Reversed Free Flow Inlet Port Fully xtended 7(.7) 6 (.) uxiliary Pilot Port (For "P" models only) 9 (.69) (.3) Dia. Through 7.5(.69) Dia. Spotface 6 Places xternal Pilot Port "X" Primary Pressure Inlet Port or Reversed Free Flow Outlet Port 7 (3.7) 6 (.) Locating Pin 6(.) Dia. Mounting Surface (O-Rings Furnished) Type : ounterbalance Valve (xternal Pilot, Internal Drain) xternal Pilot Port 3

8 HGM-3-//9 HGM-3X-//9 ""Thd. ""Thd. (.39) 9 (3.5) 7 (.76) 3(.5) Dia. 7(.) Dia. (.39) Deep For Locating Pin 3 (.6) 6 (.63) 5 (.59) DIMNSIONS IN MILLIMTRS (INHS) (.3) 6 (.) (.) (3.3) 7. (.) 3.5 (.93) 9.5 (.77) (.39). (.) 3. (.5) 35.7 (.). (.69) 9 (3.5).(.35) Dia. Through (.55) Dia. Spotface.7 (.7) 7.9 (.3) 33.3 (.3) 5.7 (.3) 66.7 (.63) (.6) Dia. "" Thd. (.79) Deep HGM-3- Rc 3/ HGM-3X- Rc / HGM-3-3/ HGM-3X- / "" Thd. "" Thd. "" Thd. Rc / / M HGM-3-9 HGM-3X-9 3/ NPT / NPT / NPT 3/-6 UN With uxiliary Pilot Pressure Port HGM-3-P-//9 HGM-3X-P-//9 (.39) ""Thd. 3 Places 9 (3.5) 7 (.76) D.5 (.5) ""Thd. 3(.5) Dia. 7(.) Dia. (.39) Deep For Locating Pin 36 (.) 6 (.63) 5 (.59) (3.3) (.).5 (.) F 53.5 (.) 7. (.) 9.5 (.77) (.39). (.) 3. (.5) 35.7 (.). (.69) (.6) Dia. 3 Places.7 (.7) 7.9 (.3) (.3) 33.3 (.3) 5.7 (.3) 66.7 (.63) ""Thd. (.79) Deep.(.35) Dia. Through (.55) Dia. Spotface HGM-3-P- HGM-3X-P- HGM-3-P- HGM-3X-P- HGM-3-P-9 HGM-3X-P-9 Thread Size Dimensions mm(inches) "" Thd. "" Thd. "" Thd. D F Rc 3/ Rc / 3/ / 3/ NPT / NPT Rc / / M / NPT 3/-6 UN 35 (.3) (.6) 35 (.3) (.6) 35 (.3) (.6) 69.5 (.7) 67.5 (.66) 69.5 (.7) 67.5 (.66) 69.5 (.7) 67.5 (.66).5 (.9).5 (.57).5 (.9).5 (.57).5 (.9).5 (.57)

9 PRSSUR ONTROLS HGM-6-//9 HGM-6-P-//9 ""Thd. ""Thd. (.) (.7) Dia. 7(.) Dia. (.39) Deep For Locating Pin 36 (.) 6 (.63) 5 (.59) DIMNSIONS IN MILLIMTRS (INHS) 77 (3.3) (.) (.9) 39 (.5) 7 (.6). (.).6 (.) 39.7 (.56).5 (.75) 9. (.9) 6.3 (.37) (.39) (.33) "D" Thd. (.6) Dia. "HGM-6-P" uxiliary Pilot Pressure Models Only.3 (.) F 6. (.5) (.55) 39.7 (.56) 73 (.7) 79. (3.3) HGM-6X-//9 HGM-6X-P-//9 ""Thd. ""Thd..3 (.) (.) 75 (.95) 5(.) Dia. "" Thd. (.79) Deep.(.35) Dia. Through (.55) Dia. Spotface HGM-6- HGM-6-P- HGM-6- HGM-6-P- HGM-6-9 HGM-6-P-9 (.7) Thread Size Dimensions mm(inches) "" Thd. "" Thd. "" Thd. "D" Thd. F Rc 3/ 3/ 3/ NPT (.7) Dia. 7(.) Dia. (.39) Deep For Locating Pin 7 (.) Rc / / / NPT M 3/-6 UN 5 (.77) 6 (.63) 5 (.59) Rc / / / NPT 6.7 (.3) 6 (.5) 6.7 (.3) 6 (.5) 6.7 (.3) 6 (.5) 6. (.5) 3 (.) 6. (.5) 3 (.) 6. (.5) 3 (.) 36 (5.35) H H/HType Pressure ontrol Valves (.9) 39 (.5) J 6 (.63). (.).6 (.) 39.7 (.56).5 (.75) 9. (.9) 6.3 (.37) 3 (5.) F "D" Thd. (.6) Dia. (.55) "HGM-6X-P" uxiliary Pilot Pressure Models Only 6. (.5) 39.7 (.56) 73 (.7) 79. (3.3) HGM-6X- HGM-6X-P- HGM-6X- HGM-6X-P- HGM-6X-9 HGM-6X-P-9 5(.) Dia. "" Thd. (.79) Deep.(.35) Dia. Through (.55) Dia. Spotface Thread Size Dimensions mm(inches) "" Thd. "" Thd. "" Thd. "D" Thd. F H Rc NPT Rc / / / NPT (.7) M 3/-6 UN Rc / / / NPT 6.7 (.3) 6 (.5) 6.7 (.3) 6 (.5) 6.7 (.3) 6 (.5) 6. (.5) 3 (.) 6. (.5) 3 (.) 6. (.5) 3 (.).3 (3.) J (.7) (3.5) (.9).3 (3.) (.7) (3.5) (.9).3 (3.) (.7) 5

10 HGM--//9 HGM--P-//9 "" Thd. (.79) Deep 6 Places ""Thd. (.7) (5.5) 6 (.57) ""Thd. (.) Dia. 7(.) Dia. (.39) Deep For Locating Pin DIMNSIONS IN MILLIMTRS (INHS) 5 (.77) (.79) 9 (.75) 3 (.69) 5 (5.9) 6 (.96) 96 (3.7) 3 (.) 6.7 (.66).6 (.97) (.7). (.66) 59.5 (.3) 6.7 (.7) 67.5 (.66). (3.3) 35 (5.3) "D" Thd. (.6) Dia. 5 (.59).6 (.6) "HGM--P" (.3) uxiliary Pilot Pressure Models Only (.7). (.9) 9.9 (3.66) 96. (3.) (.7) HGM-X-//9 HGM-X-P-//9 "" Thd. (.79) Deep 6 Places ""Thd. (.6) (5.5) 6 (.57) F 5(.) Dia. (.3) Dia. Through 7.5(.69) Dia. Spotface HGM-- HGM--P- HGM-- HGM--P- HGM--9 HGM--P-9 ""Thd. (.) Dia. 7(.) Dia. (.39) Deep For Locating Pin (.3) "" Thd. Rc -/ -/ -/ NPT 7.5 (.3) Thread Size "" Thd. "" Thd. Rc / / / NPT 5 (.97) M 3/-6 UN (.79) 9 (.75) "D" Thd. Rc / / / NPT mm(inches) 3.6 (.5) (.3) 3.6 (.5) (.3) 3.6 (.5) (.3) 77 (6.97) 6 (.96) 5.5 (.) (.9) "D" Thd. (.6) Dia. 3 (.69) (.7) 5 (.59).6 (.6) (.3) "HGM-X-P" uxiliary Pilot Pressure Models Only (.6). (.9) 9.9 (3.66) 96. (3.) (.7) 6.7 (.66).6 (.97). (.66) 59.5 (.3) 6.7 (.7) 67.5 (.66). (3.3) 5(.) Dia. (.3) Dia. Through 7.5(.69) Dia. Spotface HGM-X- HGM-X-P- HGM-X- HGM-X-P- HGM-X-9 HGM-X-P-9 (.3) Thead Size mm(inches) "" Thd. "" Thd. "" Thd. "D" Thd. F 3.6 (.5).5 (.) Rc -/ -/ -/ NPT 67 (6.57) 5 (.) Rc / / / NPT M 3/-6 UN Rc / / / NPT (.3) 3.6 (.5) (.3) 3.6 (.5) (.3) 6 (.7).5 (.) 6 (.7).5 (.) 6 (.7) 6

11 PRSSUR ONTROLS Pressure Drop for Reversed Free Flow Hydraulic Fluid: Viscosity 35 mm /s (6 SSU), Specific Gravity.5 Pressure Drop P PSI MPa HT-3 HG L/min Pressure Drop P PSI MPa Flow Rate HT-6 HG U.S.GPM 5 L/min H/HType Pressure ontrol Valves 5 5 Flow Rate 5 3 U.S.GPM Pressure Drop P PSI MPa HT- HG- 5 5 L/min 3 Flow Rate 5 6 U.S.GPM For any other viscosity, multiply the factors in the table below. mm /s Viscosity SSU Factor For any other specific gravity (G'), the pressure drop ( P') may be obtained from the formula below. P'= P (G'/.5) 7

12 Nominal Override haracteristics Hydraulic Fluid: Viscosity 35 mm /s (6 SSU), Specific Gravity.5 PSI MPa H* /H * -3- H* /H * -3- H* /H * -3- H* /H * -3-N H* /H * -3-M H* /H * -3-L PSI MPa H* /H * -6- H* /H * -6- H* /H * -6- H* /H * -6-N H* /H * -6-M H* /H * -6-L 3 5 L/min L/min Flow Rate U.S.GPM Flow Rate U.S.GPM PSI MPa H* /H * -- H* /H * -- H* /H * -- H* /H * --N H* /H * --M H* /H * --L L/min Flow Rate U.S.GPM

13 PRSSUR ONTROLS Spare Parts List HT-3, 6, -** - * -//9 HG-3, 6, -** - * -/ Section "" for HT- * - ** - *- Models H/HType Pressure ontrol Valves List of Seals Item Name of Parts O-Ring HT HG -3 SO-N-P Part Numbers HT HG -6 SO-N-P 3 O-Ring SO-N-P6 SO-N-P6 SO-N-P6 O-Ring SO-N-P9 SO-N-P9 SO-N-P9 5 O-Ring SO-N-P9 SO-N-P9 SO-N-P9 6 O-Ring SO-N-P SO-N-P5 SO-N-P O-Ring SO-N-P SO-N-P SO-N-P3 9 O-Ring SO-N-P SO-N-P SO-N-P36 3 onded Seal SG-F-/ SG-F-/ SG-F-/ HT Quantity HG - HT- * HG- * SO-N-P Used only for HG type with auxiliary pilot pressure (P). Note: When ordering the seals, please specify the seal kit number from the table berow. List of Seal its 3 Valve HT-3- ** - * -//9 HT-6- ** - * -//9 HT-- ** - * -//9 HG-3- ** -/9 HG-3- ** -P-/9 HG-6- ** -/9 HG-6- ** -P-/9 HG-- ** -/9 HG-- ** -P-/9 Seal it Numbers S-HT-3- S-HT-6- S-HT-- S-HG-3- S-HG-3-P- S-HG-6- S-HG-6-P- S-HG-- S-HG--P- Note: No bonded seals are included in the seal kits. 9

14 Spare Parts List HT-3, 6, -** - * -//9 HG-3, 6, -** - * -/ Section "" for HT- * - ** - *- Models 5 List of Seals Item O-Ring 3 O-Ring SO-N-P6 SO-N-P6 SO-N-P6 O-Ring SO-N-P9 SO-N-P9 SO-N-P9 5 O-Ring SO-N-P9 SO-N-P9 SO-N-P9 6 O-Ring SO-N-P SO-N-P5 SO-N-P 7 O-Ring SO-N-P SO-N-P SO-N-P O-Ring SO-N-P SO-N-P SO-N-P3 9 3 Name of Parts onded Seal HT Part Numbers HT HT Quantity HG -3 HG -6 HG - HT- * HG- * SO-N-P O-Ring SO-N-P SO-N-P SO-N-P36 SG-F-/ SO-N-P SG-F-/ SO-N-P SG-F-/ Used only for HG type with auxiliary pilot pressure (P). Note: When ordering the seals, please specify the seal kit number from the table below. List of Seal its 3 Valve HT-3- ** - * -//9 HT-6- ** - * -//9 HT-- ** - * -//9 HG-3- ** -/9 HG-3- ** -P-/9 HG-6- ** -/9 HG-6- ** -P-/9 HG-- ** -/9 HG-- ** -P-/9 Seal it Numbers S-HT-3- S-HT-6- S-HT-- S-HG-3- S-HG-3-P- S-HG-6- S-HG-6-P- S-HG-- S-HG--P- Note: No bonded seals are included in the seal kits. 5

Check/ Pilot Controlled Check Valves

Check/ Pilot Controlled Check Valves heck/ Pilot ontrolled heck s Type Graphic Symbols Max. Operating Pressure U.S.GPM.3. L/min Page In-Line (IT) 3 heck s (33) Right ngle (RT/RG) 3 98 Right ngle, langed onnection (R) Pilot Operated heck s

More information

Pilot Operated Check Valves

Pilot Operated Check Valves Pilot Operated Check Valves These check valves allow flow in one direction and prevent flow in the reverse direction, until operated by pilot pressure to allow free reverse flow. The specified cracking

More information

Flow Control (and Check) Valves FG FCG -01/02/03/06/10. Specifications / Model Number Designation / Others. Min. Metred Flow Capacity

Flow Control (and Check) Valves FG FCG -01/02/03/06/10. Specifications / Model Number Designation / Others. Min. Metred Flow Capacity low Control (and Check) Valves -//3/6/ Mounting Specifications / Model Number esignation / Others Specifications Max. Metred low Capacity () Min. Metred low Capacity () Max. Operating Pressure () Approx.

More information

Max. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting

Max. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting Remote ontrol Relief s This valve is used as a remote control valve for pilot operated type pressure control valves. RESSURE ONTROLS EI--01-0 Graphic Symbol Specifications Threaded onnection Model ation

More information

THROTTLE MODULES TC1G-01 / 03 (1 / 8, 3 / 8) THROTTLE AND CHECK MODULES TC2G-01 / 03 (1 / 8, 3 / 8)

THROTTLE MODULES TC1G-01 / 03 (1 / 8, 3 / 8) THROTTLE AND CHECK MODULES TC2G-01 / 03 (1 / 8, 3 / 8) THROTTLE MOULES - / 3 ( / 8, 3 / 8) THROTTLE AN CHECK MOULES TCG- / 3 ( / 8, 3 / 8) Gasket Specifications / Model Number esignation Up to MPa (363 PSI), 8 L/min (. U.S.GPM) Pub. EC-3 Used as pilot choke

More information

Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations

Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................

More information

005 SERIES MODULAR VALVES. Pub. EC-1401. General Information Up to 25 MPa (3630 PSI), 10 L /m in (2.6 U.S.GPM) Modular Valve Type

005 SERIES MODULAR VALVES. Pub. EC-1401. General Information Up to 25 MPa (3630 PSI), 10 L /m in (2.6 U.S.GPM) Modular Valve Type 5 SERIES General Information Up to 5 Ma (3 SI), 1 L /m in (6 USGM) ub EC-11 MODULR VLVES hese modular valves have the same mounting surface as those for the DSG-5 solenoid operated directional valves and

More information

"A" Series Variable Displacement Piston Pumps Single Pump, "OBE" Type Electro-Hydraulic Proportional Pressure & Flow Control Type

A Series Variable Displacement Piston Pumps Single Pump, OBE Type Electro-Hydraulic Proportional Pressure & Flow Control Type Single Pump, "OBE" Type Electro-Hydraulic Proportional & Flow Type Input Signal for Safety valve Input Signal for Flow Amplifier Proportional Solenoid Sensor Valve Piston (S Input Voltage L) Performance

More information

Check Valves. Pilot Operated Check Valves 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Vickers. Basic Characteristics.

Check Valves. Pilot Operated Check Valves 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Vickers. Basic Characteristics. Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum

More information

01 SERIES MODULAR VALVES

01 SERIES MODULAR VALVES SERIES General Information Mounting Surface : ISO 44--3-4-, CEO-3, N-D Up to 3.5 Ma (457 SI), 35 L /min (9.5 U.S.GM) ub. EC-4 MODULR VLVES he modular valves are functional elements with which a hydraulic

More information

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93 Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct

More information

1/8 Modular Valves. Type of Modular Valve. 01 Series Modular Valves 535. Class. Model Numbers Graphic Symbols Page

1/8 Modular Valves. Type of Modular Valve. 01 Series Modular Valves 535. Class. Model Numbers Graphic Symbols Page / Modular Valves ype of Modular Valve Class ressure Control Valves Flow Control Valves Graphic Symbols age Solenoid Operated Directional Valve (S-)DSG-- *** - * -7/79 E-DSG-- *** -D * -6/69 -DSG-- ***

More information

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 3525VQSV10* ***** ******* 20* Released M 2494 S

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 3525VQSV10* ***** ******* 20* Released M 2494 S Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 3525VQSV10* ***** ******* 20* Released 08 01 95 M 2494 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt

More information

VANE PUMPS. Output Flow at 1200 r /min at No-Load U.S.GPM.3.5 1 2 5 10 20 50 100 200. Maximum Operating Pressure MPa (PSI) Pump Type. Catalogue No.

VANE PUMPS. Output Flow at 1200 r /min at No-Load U.S.GPM.3.5 1 2 5 10 20 50 100 200. Maximum Operating Pressure MPa (PSI) Pump Type. Catalogue No. Pump Type "PVL" Series Single Pumps Single Pumps Maximum Operating MPa (PSI) () () at r /min at No-Load.. PVL T T F F Catalogue No. Pub. EC- Double Pumps () Small Volume Large Volume () () () () () ()

More information

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released M 2497 S

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released M 2497 S Service Data Vickers Vane Pumps Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released 08 01 95 M 2497 S 10 SAE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin Bolt

More information

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES CONTINENTAL HYDRAULICS PR*SP - PR*SPU PILOT OPERATED PRESSURE RELIEF VALVE SERIES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM POWERFUL PR*SP - PR*SPU

More information

Pilot Operated Check Valves Model SV/SL (Series 4X)

Pilot Operated Check Valves Model SV/SL (Series 4X) R 68/06.98 Size 0 to 0 Pilot Operated Check Valves Model SV/SL (Series ) 600 PSI (5 bar)... 5 GPM (550 L/min) R 68/06.98 Replaces: 05.9 Pilot operated check valve, with leak-free closure in checked direction

More information

Pressure Relief. Pressure Relief Valves. Vickers

Pressure Relief. Pressure Relief Valves. Vickers Vickers Pressure Relief Pressure Relief Valves Remote Controls, Relief and Sequence Valves, and Single and Multiple Pressure Solenoid and Air Operated Relief Valves 511./EN/1297/A Introduction Remote Controls

More information

Directional Controls

Directional Controls Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO-4401-08/10 Released 5/94 681 able of Contents General Information..................................................................................

More information

03 SERIES MODULAR VALVES

03 SERIES MODULAR VALVES 3 SERIES General Information Mounting Surface : ISO 44-C--4-, CETO-, N-DO Up to Ma (363 SI), 7 L /min (8. U.S.GM) ub. EC-43 MODULR VLVES The modular valves are functional elements with which a hydraulic

More information

Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits

Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot

More information

VANE PUMPS B-1. Maximum. Output Flow L/min(1200r/min{rpm}, no-load) Operation. KS Graphic. Pressure. Page. Pump Type. Symbol.

VANE PUMPS B-1. Maximum. Output Flow L/min(1200r/min{rpm}, no-load) Operation. KS Graphic. Pressure. Page. Pump Type. Symbol. VANE PUMPS Maximum Type KS Graphic Symbol Output Flow /min(1200r/min{rpm}, no-load) 1 2 5 10 20 50 100 200 500 1000 Operation Pressure MPa {kgf/cm 2 } Page Single s 50T 150T 7 {71.4} -4 Fixed PV2 Series

More information

Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits.

Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits. Vickers Pressure Relief Pressure Relief and Sequence Valves CG2V-6/8, 1 Series; CG5V-6/8, 2 Series Typical Section CG2V-6*W-1 relief valve Basic Characteristics Maximum pressure.......... 35 bar (5 psi)

More information

Piston Pumps. PVE Piston Pumps. Vickers

Piston Pumps. PVE Piston Pumps. Vickers Vickers Piston Pumps PVE Piston Pumps PVE12 Variable Displacement Single Pump PVE19 / PVE21 Variable Displacement Single & Thru-Drive Pumps PVE4* 25V Integrated Models GB C 223 A.1 Table of Contents Introduction.................................................................................................

More information

Check Valves. Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)

Check Valves. Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) Check Valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 7 L/min (60 USgpm) EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E4 September, 007 - Check

More information

RJV1-05 2(4) 1. Functional Description HA /2012. Pilot Operated Cartridge Check Valves. Replaces HA /2011

RJV1-05 2(4) 1. Functional Description HA /2012. Pilot Operated Cartridge Check Valves. Replaces HA /2011 Pilot Operated Cartridge Check Valves RJV-05 HA 5 8/0 Size 05 50 bar (600 PSI) 0 L/min (5. GPM) Replaces HA 5 0/0 Cartridge valve for manifold mounting and with subplate with subplate - enables direct

More information

Pilot Operated Pressure Relief Valves Series R4V / R6V

Pilot Operated Pressure Relief Valves Series R4V / R6V Characteristics Series RV / R6V Pilot operated pressure relief valves series RV (DIN 230 Form D) and R6V (DIN 230 Form E) consist of a manually adjusted pilot stage and a seated type main stage. A vent

More information

IFP SINGLE VANE PUMPS V10/V20 - V210/V230

IFP SINGLE VANE PUMPS V10/V20 - V210/V230 IFP SINGLE VANE PUMPS V10/V20 - V210/V230 * High Performance * Low Cost * Extended Life * Versatile * Compact * Quiet Operation * Balanced Cartridge Design C:\Program Files\ACAD2000\CATELOG\NDcatalogue\pictures\V10&V20.bmp

More information

General Size Mounting 2-port in-line flange SAE 61 Mounting Position Ambient Temprature Hydraulic Maximum Operating Pressure

General Size Mounting 2-port in-line flange SAE 61 Mounting Position Ambient Temprature Hydraulic Maximum Operating Pressure Technical Information Pilot Operated Check Valve Series C5P General Description Series C5P pilot operated check valves have a similar design to the subplate mounted SVL series. The SAE flanges allow to

More information

Vickers. Piston Pumps

Vickers. Piston Pumps Vickers Piston Pumps xial Piston Pumps Fixed and Variable Displacement PF, PF, PF PV /6, PV /, PV /9, PV and PV 9 to SE PV /6, PV /, PV /9 to DIN/ISO 39, Part G-379 Contents asic characteristicts..........................................................................................3

More information

Republic/Manatrol Hydraulic and Pneumatic Control Valves. Catalog HY /US FOR POSITION ONLY

Republic/Manatrol Hydraulic and Pneumatic Control Valves. Catalog HY /US FOR POSITION ONLY Republic/Manatrol Hydraulic and Pneumatic Control Valves Catalog HY14-3000/US FOR POSITION ONLY Republic/Manatrol Valves Hydraulic and Pneumatic Controls WARNING FAILUR OR IMPROPR SLCTION OR IMPROPR US

More information

Scavenging and Pressure Relief Valve Block SDVB

Scavenging and Pressure Relief Valve Block SDVB Brueninghaus Hydromatik Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P RE 95533/03.96 RE 95533/03.96 Replaces 01.82 The scavenging and pressure relief valve block

More information

Pressure relief valve, type DB/DBW...50B/ (New Series) Huade América 1

Pressure relief valve, type DB/DBW...50B/ (New Series) Huade América 1 Pressure relief valve, type DB/DBW...50B/ (New Series) Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure relief valve, type DB/DBW...50B/ (New Series) Size 10 to 32 up to 35 MPa

More information

VANE PUMPS B-1. Maximum. Output Flow L/min(1200r/min{rpm}, no-load) Operation. KS Graphic. Pressure. Page. Pump Type. Symbol.

VANE PUMPS B-1. Maximum. Output Flow L/min(1200r/min{rpm}, no-load) Operation. KS Graphic. Pressure. Page. Pump Type. Symbol. B VANE PUMPS Maximum Pump Type KS Graphic Symbol L/min(1200r/min{rpm}, no-load) 1 2 5 10 20 50 100 200 500 1000 Operation MPa {kgf/cm 2 } Page 50T 150T 7 {71.4} B-4 Fixed PV2R Series PV2R1 PV2R2 PV2R3

More information

Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications

Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Technical Catalog PVQ10 PVQ13 PVQ20 PVQ25 PVQ32 PVQ40 PVQ45 Table of Contents Introduction......................................................................................................

More information

Check Valves Valve locator

Check Valves Valve locator Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()

More information

Hydraulic Pressure Control Valves

Hydraulic Pressure Control Valves Webtec Products Limited Hydraulic Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. RV 020 Direct In-Line Relief Valve 1 RV 025 Relief Valve 3 RV 050 Relief

More information

Pressure Relief Valve, Direct Operated Model DBD (Series 1X)

Pressure Relief Valve, Direct Operated Model DBD (Series 1X) ressure Relief Valve, Direct Operated Model DBD (Series 1X) Sizes 6 to 30... 9150 SI (630 bar) 87 GM (330 L/min) RA 25 402/06.98 Replaces: 05.94 Direct operated, fast response pressure relief valve hree

More information

FLUTEC Pressure Relief Valves

FLUTEC Pressure Relief Valves FLUTEC Pressure Relief Valves Pressure Relief DB4E 1.1. up to 630 bar up to 30 l/min Connection housings 2 1. DESCRIPTION 1.1. GENERAL According to DIN -ISO 1219, DB4E are valves for oil hydraulic systems

More information

Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653)

Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653) SPECIFICATIONS AND PARTS Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653) Serial Codes GDV and GDL Read and understand all of the instructions and safety information in this manual before

More information

KDG3V-5/7/8, 10 Series

KDG3V-5/7/8, 10 Series Vickers roportional Valves KDG3V-5/7/8, 1 Series Single-Stage with Hydraulic ilot Operation High Flow roportional Directional Control Valves asic Characteristics Max. pressure.......... up to 35 bar (5

More information

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic

More information

IFP A10VSO VARIABLE AXIAL PISTON PUMPS. Available sizes: NOMINAL PRESSURE 4000 psi [280 bar] PEAK PRESSURE 5100 psi [350 bar] FEATURES SECTIONAL VIEW

IFP A10VSO VARIABLE AXIAL PISTON PUMPS. Available sizes: NOMINAL PRESSURE 4000 psi [280 bar] PEAK PRESSURE 5100 psi [350 bar] FEATURES SECTIONAL VIEW IFP A10VSO VARIABLE AXIAL PISTON PUMPS Available sizes: 18 1.10 in3/rev [18 cm3/rev] 28 1.71 in3/rev [28 cm3/rev] 45 2.75 in3/rev [45 cm3/rev] 71 4.33 in3/rev [71 cm3/rev] 100 6.10 in3/rev [100 cm3/rev]

More information

Internet For latest information, PDF catalogs and operation manuals. Discharge rate. Pressure. Discharge rate.

Internet  For latest information, PDF catalogs and operation manuals. Discharge rate. Pressure. Discharge rate. Control Code JIS graphic symbols for hydraulic system Characteristics Features/pplication Pressure control When the discharge pressure approaches the preset full-cutoff pressure, the discharge rate automatically

More information

Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40

Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40 Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane

More information

Pressure relief valves Size 6

Pressure relief valves Size 6 Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are

More information

Check & Load Control Valves

Check & Load Control Valves Overview The HYDAC range of direct and pilot operated check valves provide a broad selection of cartridge and inline products with operating pressure rating of up to 6 psi (4 bar). All valves have a one

More information

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow 1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

SystemStak. SystemStak Valves. Vickers

SystemStak. SystemStak Valves. Vickers Vickers SystemStak SystemStak Valves ISO 4401-05 size, 315 bar (40 psi) and 120 l/min (32 USgpm) maximum ratings ressure relief and reducing, sequence, counterbalance, and flow control functions Revised

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

AXIAL PISTON PUMPS PV S E R I E S 2 0 C L O S E D C I R C U I T

AXIAL PISTON PUMPS PV S E R I E S 2 0 C L O S E D C I R C U I T GENERAL DESCRIPTION Axial piston variable displacement pumps, Series 20, are of swash plate construction with variable flow capatibility suitable for hydrostatic transmissions with closed circuit. The

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications

VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact

More information

RPE3-04. Functional Description HA 4014 09/2013. Directional Control Valves Solenoid Operated. Replaces HA 4014 10/2010

RPE3-04. Functional Description HA 4014 09/2013. Directional Control Valves Solenoid Operated. Replaces HA 4014 10/2010 Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) HA 4014 09/2013 Replaces HA 4014 10/2010 4/3-, 4/2- way directional control valves with solenoid

More information

Coreless Spin-on Filters

Coreless Spin-on Filters The Smart Alternative to Spin-on Cans! Features: Parker engineers have developed an innovative alternative to the age old spin-on style can. This new design provides all of the benefits of high efficiency,

More information

Hydraulic Flow Control Valves

Hydraulic Flow Control Valves Webtec Products Limited Hydraulic Flow Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. ILFC Series Fixed Flow Pressure Compensated Control Valve 1 VFC Series

More information

Pressure reducing valve, direct operated, Type ZDR 6 D

Pressure reducing valve, direct operated, Type ZDR 6 D RE 26 57/2.3 Replaces:.2 Pressure reducing valve, direct operated, ype ZDR 6 D Nominal size 6 Series 4X aximum operating pressure 2 bar aximum flow 5 L/min K 4279/ ype ZDR 6 DP2 4X/ Y Overview of contents

More information

FRL/AirCare Air Controls & Accessories

FRL/AirCare Air Controls & Accessories FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor

More information

RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007

RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007 Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid

More information

Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US

Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle

More information

Pressure Relief Valves SPV, SPVF

Pressure Relief Valves SPV, SPVF Pressure Relief Valves SPV, SPVF Construction of the Pressure Relief Valves SPV, SPVF Symbol Description The direct spring, sliding piston Pressure Relief Valve SPV/SPVF is intended for inline mounting

More information

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03. Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power

More information

Material taken from Fluid Power Circuits and Controls, John S. Cundiff, 2001

Material taken from Fluid Power Circuits and Controls, John S. Cundiff, 2001 Pressure Control Chapter 3 Material taken from Fluid Power Circuits and Controls, John S. Cundiff, 2001 Introduction Pressure control is a key element in the design of any circuit. Used correctly, it can

More information

Pressure Control Valves

Pressure Control Valves Pressure Control Valves Relief Single Multi Pressure Remote Solenoid Manual w w w. FluiDyneFP.com Remote Control Relief Valves Series WFC175 REMOTE CONTROL RELIEF VALVE WFC 175 C 20 DESIGN NUMBER Model

More information

VER03MG CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE VER03MG - PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE

VER03MG CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE VER03MG - PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE CONTINENTAL HYDRAULICS VER03MG PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM PRECISE VER03MG PROPORTIONAL

More information

Variable Displacement Pump AA10VSO

Variable Displacement Pump AA10VSO Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi

More information

Pressure relief valve, pilot operated

Pressure relief valve, pilot operated ressure relief valve, pilot operated RE 80/10.0 Replaces: 0.0 1/0 ypes D and DW Sizes 10 to Component series Maximum operating pressure 0 bar Maximum flow 0 L/min H988 + H089 able of contents Contents

More information

HYDAC Compact Power Units CA

HYDAC Compact Power Units CA 1007 HYDAC Compact Power Units CA Up to 250 bar Up to 12.6 l/min Suitable for: Short-term operation S2 Intermittent operation S3 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL For short-term operation S2 or intermittent

More information

2/2 and 3/2 Way Size 6 Seat Valves

2/2 and 3/2 Way Size 6 Seat Valves 2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08

More information

COUNTERBALANCE VALVES

COUNTERBALANCE VALVES COUNTERBALANCE VALVES Introduction They are modulating valves which allow free flow into the actuator and then block the reverse flow until they feel a pilot pressure inversely proportional to the load

More information

PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V

PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and wk Internal Dra on the prciple of hydraulic balancg. These valves are used to limit

More information

PowrFlow HPV Series Axial Piston Pumps

PowrFlow HPV Series Axial Piston Pumps PowrFlow HPV Series Axial Piston Pumps HPV SERIES AXIAL PISTON PUMPS RELIABLE POWER FOR ANY HYDRAULIC SYSTEM Product Description What Makes PowrFlow HPV Series Axial Piston Pumps Your Best Buy? Variable

More information

VIKING BUILT DOUBLE PUMPS

VIKING BUILT DOUBLE PUMPS Like getting two pumps in one! SP-1470-C VIKING BUILT DOUBLE PUMPS Viking double pumps are ideally suited to many applications in the industrial and mobile markets. Two independent pumping units are operated

More information

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm) Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers

More information

Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.

Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S. Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical

More information

http://www.daikinpmc.com/en/ For latest information, PDF catalogs and operation manuals Features MPa {kgf/cm 2 } 100 17.5 {175}

http://www.daikinpmc.com/en/ For latest information, PDF catalogs and operation manuals Features MPa {kgf/cm 2 } 100 17.5 {175} Solenoid Valve Features 2 For DC power supply 3 For C power supply These models realize high-pressure large-flow-rate control at 35 MPa {35 kgf/cm 2 } and 1 L/min (2) or 16 L/min (3). They are best suited

More information

VARIABLE VANE PUMPS V3

VARIABLE VANE PUMPS V3 VARIABLE VANE PUMPS V3 (series 30 and 40) Nominal sizes 12; 25; 40; 63 up to p n 100 bar V g 8.5; 19; 32; 47 cm 3 /rev KE 1015 11/02 replaces 07/97 easy commissioning due to automatic bleed facility low

More information

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems.

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. Section 12 U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. R84 Regulator and C84 Regulator Configurations for Soft Drink Carbonator

More information

2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow

2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow 2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description

More information

Table of Contents. M Series Variable Displacement Piston Pumps

Table of Contents. M Series Variable Displacement Piston Pumps Table of Contents M Series Variable Displacement Piston Pumps Introduction.... 3 Hydraulic System Design Calculations.... 4 Model Code Selection.... 5 Model Code Options.... 6 Specifications and Performance...

More information

DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC

DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC Publ. 1 - EN0709 - A 01 / 2000 / 2500 / FB Replaces : 1 - EN 084 - B L25-10709 - 1 CONTENTS GENERAL CHARACTERISTICS T67GB T6GC - T6ZC T67GB

More information

15/40/80CN Series Medium Pressure Filters

15/40/80CN Series Medium Pressure Filters 1/4/8CN Series Medium Pressure Filters Max 32 l/min - 7 bar Global Filtration Technology 1/4/8CN Series TYPICAL APPLICATIONS Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard)

More information

PVH131/141 Variable Displacement Piston Pump - 11 Design

PVH131/141 Variable Displacement Piston Pump - 11 Design Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque

More information

HPV SERIES AXIAL PISTON PUMPS

HPV SERIES AXIAL PISTON PUMPS INDEX COMPENSATED VOLUMETRIC THEORETICAL FLOW@ MODEL MAXIMUM CONTINUOUS FLANGE PAGES DISPLACEMENT 17 RPM SERIES MOUNTING.88 CU. IN./REV. 6.67 GPM HPV-6B35 30 PSI SAE A 2-BOLT* 9-15 1.26 CU. IN./REV. 9.55

More information

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51 83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE

More information

Vickers. Valves. CM2, CM11, RM3 & FM3 Control Valves. For Mobile Equipment. Revised 4/96

Vickers. Valves. CM2, CM11, RM3 & FM3 Control Valves. For Mobile Equipment. Revised 4/96 Vickers Valves CM2, CM11, RM3 & FM3 Control Valves For Mobile Equipment Revised 4/96 33 Introduction The directional valves described in this booklet are more than just directional valves -- they are hydraulic

More information

Service Data Vickers. Piston Pumps. PVH74/81 Variable Displacement Piston Pump - 11 Design. Revised 11/01/97

Service Data Vickers. Piston Pumps. PVH74/81 Variable Displacement Piston Pump - 11 Design. Revised 11/01/97 Service Data Vickers Piston Pumps PVH74/81 Variable Displacement Piston Pump - 11 Design Revised 11/01/97 Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque Limiter

More information

High Speed Hydraulic Motors. Catalog HY /NA

High Speed Hydraulic Motors. Catalog HY /NA High Speed Hydraulic Motors Catalog HY13-20-0-001/NA 341 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed range of

More information

SUBJECT: HYDRAULIC CHECK VALVES AND FLOW CONTROL VALVES

SUBJECT: HYDRAULIC CHECK VALVES AND FLOW CONTROL VALVES SUBJECT: HYDRAULIC CHECK VALVES AND FLOW CONTROL VALVES ABOUT THE SESSION This session deals with check valves, flow control valves, its functions, operations and application. INTRODUCTION Check Valve:

More information

SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.

SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of

More information

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls www.atos.com Table A609/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,

More information

UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves

UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, 02 T A Replaces: MVP 01 T A Modification from former edition Variable displacement axial piston pumps, DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) for open circuit

More information

Proportional Pressure Reducing Valves

Proportional Pressure Reducing Valves Proportional Pressure Reducing Valves Technical Catalog KBX(C)G-6-1* KBX(C)G-8-1* Contents General Description Page 3 Typical Section Page 3 Functional Symbols Page 4 Model Codes Page 5 Operating Data

More information

Worldwide Contacts.

Worldwide Contacts. Worldwide Contacts www.tyco-fire.com Worldwide Contacts www.tyco-fire.com Model AV--00 Alarm Valve (DN to DN00) With and Without Model RC- Retard Chamber European Conformity Valve Trim General Description

More information

Vane Pump & Motor Design Guide

Vane Pump & Motor Design Guide Vickers Service Guide Vane Pump & Motor Design Guide For Mobile Equipment Revised 8/98 353 Introduction Over the past twenty years, the application of hydraulics in agricultural, construction and materials

More information

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE NFPA D03 MOUNTING INTERFACE ISO 4401-03-02-0-94 (CETOP 4.2-4-03-250) SUBPLATE MOUNTING NFPA D03 ISO 4401-03 (CETOP 03) NG6 Pressure max 4060

More information

Rexroth Hydraulic Pump A10VO Series User Manual

Rexroth Hydraulic Pump A10VO Series User Manual Rexroth Hydraulic Pump A10VO Series User Manual Rexroth Hydraulic pump A10VO Series User Manual Revised 5/1/2009 Page 1 of 12 Functional Purpose This pump is preferred over a fixed displacement (gear)

More information

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also

More information