Auxiliary Hydraulic Oil Cooler for Skid-steers 105,000 BTU s/hr.
|
|
- Kelley Armstrong
- 7 years ago
- Views:
Transcription
1 Auxiliary Hydraulic Oil Cooler for Skid-steers 105,000 BTU s/hr. Features = Rugged Roof-mounted Design = 12 Volt Heavy-duty Fan Speed Controller = GPM Flow Capacity = Automatic Thermostatically Controlled On/Off Switch = Easy-cleaning Screens = Built-in By-pass Protection Allows Reverse Hyd. Flow = Aluminum Brazed Core = Continuous Cooling of Entire Hydraulic System = 16 inch Dia. Cooling Fan = Less Vibration & Back Pressure than Head-mounted = 105,000 BTU s/hr. Capacity = Stays on Skid-steer for Use with Any Attachment = Cold Weather By-pass for Start-up = Heavy-duty Construction & Screens = 30 W x 31 L x 16 H = Weighs 220 lbs L Printed Prices Effective Subject to Change - USD - FOB Factory - Uncrated loftness.com
2 2015 Retail Pricing - auxiliary oil Cooler Specifications & Prices 10CFISUV2 Generic Cooler Kit* $ 4, *Generic Cooler Kits include cooler, protective box and generic mounting feet. Model specific mounting hardware/brackets are not included with generic kit. Crating Charge $ Various hoses and adapter fittings will be needed to install and are NOT included. Some welding or drilling may be required. See back page for more install information or call the factory. General Cooler installation info = The Loftness cooler and protective box are designed to be used where more hydraulic cooling is needed in mobile equipment. = The oil cooler consists of the oil cooler/protective box, oil cooler core, electric fan, fan controller, by-pass check valve, temperature sensor, wire harness, inlet and outlet ports, slide-out screen, removable top, hinged shroud and mounting feet. = The oil cooler draws air in from the bottom and blows it out the top. Overall dimensions are 31 inches long x 30 inches wide x 16 inches tall. The unit weighs 220 pounds. = Generally, the cab roof is the best place to mount the cooler. Alternative locations might be behind the operator s cab or on top of a forestry package where the unit is shielded. = Hydraulic hoses are not included. Hydraulic adapters to make the hydraulic connections to your machine are not included. Power unit designs vary, which make the fittings and hoses unique to each machine type. = Generally, the auxiliary cooler is plumbed into the existing hydraulic system in series with the existing cooler. There are two main hoses needed to reach from the auxiliary cooler to the existing cooler, along with various adapter fittings. The recommended plumbing procedures are given in more detail in the operator s manual. = We also recommend that you check with the manufacturer of your power unit regarding mounting and plumbing procedures. = Detailed instructions for installing the oil cooler can be found on the Loftness web site at: = Instructions can also be transmitted by or fax free of charge. = The oil cooler specifications are : 365 PSI max inlet pressure 40 GPM max inlet flow 12 volt DC electrical system Inlet Port: -16 Male JIC Outlet Port: -16 Male JIC Fan engages at 140 degrees oil temperature. Fan disengages at 125 degrees oil temperature. Fan speed is modulated for fan RPM. L Printed Prices Effective Subject to Change - USD - FOB Factory - Uncrated
3 Rock Pickers for Skid-steers and New Holland Bi-directional Tractors U.S. Patent # Canada Patent # Features = 2 inch to 24 inch Rock Sizes = 1 inch High Carbon Steel Tines = 360 degree Bi-directional Hydraulic Reel = #60 HD Roller Chain = 6 GPM Hydraulic Requirement = Front Dumping = 1-3/4 inch Reel Bearings = 3/16 inch Side Plates (1/4 in. on 7 ft.) = Universal Skid-steer Mount (840 choice) = 1/4 inch Back Plate (5/16 in. on 7 ft.) = Grated Bottom with 2 inch Openings = Protective Screen = Picks Rocks, Concrete, Rubble, Wood = Charcoal Grey Paint = Hoses are included except 840 (couplers are not included). L Printed Prices Effective Subject to Change - USD - FOB Factory - Uncrated loftness.com
4 Spec s 2015 Retail Pricing - ROCK PICKER ATTACHMENT Circle/select 1 item from each of 2 groups in the proper size/model column and code column. Group Kwik Pick Rock Picker Code Model Width in Inches Overall Width in Inches Hopper Capacity 1/2 cu.yd. 5/8 cu.yd. 3/4 cu.yd. 1 cu.yd. Recommended Lift Capacity in Pounds* Empty Weight in Pounds Crated Weight in Pounds Model 480 $6, inches 600 $6, inches 720 $7, inches 840 $8,715 Mounting Type Bare Plate A N/A N/A N/A $0 New Holland Bi-directional 140 B N/A N/A N/A $360 New Holland Bi-directional 160 C N/A N/A N/A $460 New Holland Bi-directional 9030 D N/A N/A N/A $920 Universal Skid-steer S $680 $680 $680 $680 Product Code: Groups 1 2 Total List Price $ Hoses are included. - Couplers are NOT included Crating Charge (net price) $135 $155 $175 $ 265 * This is a minimum lift capacity recommendation; individual results may vary. Please Note: The use of counterweights is recommended. New Holland Bi-directional or Skid-steer L Printed Prices Effective Subject to Change - USD - FOB Factory - Uncrated
5 Large Sod Laying Attachment for Skid-steers Features = NEW - Hoses are included. = Manual Roll Size Adjustment = Built-in, On-the-go Adjustable Brake Pads to Eliminate Slack in Roll = Hydraulically Actuated Roll Clamp = Relief Valve to Limit Clamping Pressure = Hydraulic Cylinder Included = 1 inch Bearings = Round End Roll Holders Prevent Damage To Rolls (5-9/16 inch diameter standard). = Universal Skid-steer Mounting Plate = Charcoal Grey Paint L Printed Prices Effective Subject to Change - USD - FOB Factory - Uncrated loftness.com
6 2015 Retail Pricing - SOD LAYING ATTACHMENT Prices Model Roll Sizes Weight List Price 48SR 24 inch to 48 inch Wide x 57 inch Dia. 600 pounds $ 5, Crated Weight 795 pounds 2-7/8 inch diameter Roll Holders PN - N12503 $ Crating Price (net) $ Quick couplers for hoses are not included. Save huge $$ in labor by laying large rolls of sod with a Loftness sod-unroller. Built-in sod cutter operates from driver s seat. L Printed Prices Effective Subject to Change - USD - FOB Factory - Uncrated
REGULATORS 175/153 Series
175/153 Series 175 HEATING 153 COOLING Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2002 Watson McDaniel Company Revised 7/2002 175 / 153 Screwed
More information» 30,000 to 60,000 lb. capacity» Single and tandem axle
ROLL-OFF CABLE HOISTS Tel: 800.285.0666 sales@wastequip.com www.wastequip.com Extendable Tail (EX) cable hoists are ideal for areas with clearance issues that require a low loading height.» 30,000 to 60,000
More informationWelding Reels HANNAY REELS. For use for: Arc Welding Gas Welding Cutting Operations H-9422-W Rev. 5. The reel leader.
Welding Reels HANNAY REELS For use for: The reel leader. Arc Welding Gas Welding Cutting Operations H-9422-W Rev. 5 Series SWCR/WCR Arc Welding Reels: Power or Manual Rewind To handle cable to 400 amps.
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationWATER & OIL 12/24v DC ELECTRIC CIRCULATION PUMPS
WATER & OIL 12/24v DC ELECTRIC CIRCULATION PUMPS BAT Inc. 7630 Matoaka Road., Sarasota, FL. 34243 (941) 355-0005 fax (941) 355-4683 Heavy Duty Oil Scavenge/Circulation Pump When high temperature and continuous
More informationOil Coolers New DCS Dual Fan models for 45HP and 60HP cooling performance
DC/DCS Oil Coolers New DCS Dual Fan models for 45HP and 60HP cooling performance All DC/DCS and Dual Fan models available with internal pressure bypass DC Motor Driven Cooling Fans Are A Low Cost Solution
More informationPower Cube Open Source Ecology Page 1. Power Cube. Version 4
Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete
More informationOildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)
Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where
More informationVOLVO WHEEL LOADERS BLOCK HANDLING
VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially
More informationCat Electronic Technician 2015C v1.0 Product Status Report 2/20/2016 4:34 PM
Cat Electronic Technician 2015C v1.0 Product Status Report 2/20/2016 4:34 PM Product Status Report Parameter Product ID Equipment ID Comments Value JGB00714 NOT PROGRAMMED Machine Control 345D (JGB00714)
More informationAESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN
AESCO/MADSEN Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN manufactures two self-erecting silos called the WM-Series. The WM-50 has a 50-ton silo and the WM-80 has an 80-ton. The WM Series comes complete
More informationACCUMULATOR INSTALLATION
7001-7 ACCUMULATOR INSTALLATION BRAKE ACCUMULATORS I 308L93 Rae 7-59710 Issued 6-93 Printed in U.S.A 7001-8 Removal ACCUMULATOR VALVE 1. Park the machine on a level surface and lower the. loader bucket
More informationECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
More informationLINDGREN-PITMAN, INC. Super Spool III Installation Instructions
LINDGREN-PITMAN, INC. Super Spool III Installation Instructions LINDGREN-PITMAN, INC. 2615 N.E. 5th Avenue * Pompano Beach, Florida 33064 * U.S.A. (954)943-4243 * (954)943-7877 Fax E-mail: longline@gate.net
More informationSAFETY SAFETY APPAREL 20,000 PSI
SAFETY APPAREL TurtleSkin Water Armor is designed for UHP safety. Protection up to 2800 bar or 40,000 psi One size fits all money-saving design Modular design allows you to buy only what you need Replacement
More informationThermwire. Selection Guide. Freeze Protection Heating Cable. Thermwire -Wrap. Pre-Assembled. Thermwire-Comp. Thermwire-Melt.
Thermwire Freeze Protection Heating Cable Selection Guide Pipe Freeze Protection Heating Cable Pre-Assembled Pipe Freeze Protection Heating Cable with Attached Cord & Plug Thermwire-Comp Refrigeration
More informationCat Electronic Technician 2015A v1.0 Product Status Report 6/3/2015 4:41 PM
Cat Electronic Technician 2015A v1.0 Product Status Report 6/3/2015 4:41 PM Product Status Report Parameter Product ID Equipment ID Comments Value DHK00407 Machine Control 320D/323D (DHK00407) Parameter
More informationOWNER S MANUAL FORCE 10 MARINE COMPANY 23080 HAMILTON ROAD RICHMOND, BC CANADA V6V 1C9 TEL: (604) 522-0233 FAX: (604) 522-9608
Electric Water Heater OWNER S MANUAL FORCE 10 MARINE COMPANY 23080 HAMILTON ROAD RICHMOND, BC CANADA V6V 1C9 TEL: (604) 522-0233 FAX: (604) 522-9608 If your water Heater is Damaged or you have questions
More information3Aftermarket Systems. Air Conditioners and Kombos.. 411. Heater/Pressurizer...440. System Matrix...441. Aftermarket System Requirements...
3Aftermarket Systems Air Conditioning & Heating Replacement Parts Aftermarket Systems Air Conditioners and Kombos.. 411 KA-300 Air Conditioner... 411 KK-315 Heater/Air Conditioner Kombo...412 KA-400 Air
More informationSection 5: Machine Overview
Section 5: Machine Overview Machine Floor Plan Machine Specifications Sequence of Operation Theory of Operation Sensor Location Floor Plan 2007 Douglas Machine Inc. 5.1 Machine Floor Plan Figure 5.1: Machine
More informationNAVIEN AMERICA INC. 17855 FITCH AVENUE
Navien America Inc. Specification Details for the Navien models: CC-240 CC-240A For Potable Water Heating and Space Heating NAVIEN AMERICA INC. 17855 FITCH AVENUE IRVINE, CALIFORNIA, USA 92614 Toll Free:
More informationR 994 B. Technical Description Hydraulic Excavator
Technical Description ydraulic Excavator R 994 B litronic` Operating weight with backhoe attachment 296,00 t/652,570 lb Operating weight with shovel attachment 300,50 t/662,490 lb Engine output 1500 P
More informationElectrical Systems - IQAN Digital Control System. IQAN Control System Components... 5.1.3
Section 5.1 Electrical Systems - IQAN Digital Control System IQAN Control System Components........................... 5.1.3 IQAN Operational Description: At Machine Startup.....................................
More information300 Series PA Pump and Cooler Assemblies
Type 300 Series PA Sizes 300 thru 370 (Page 1 of 9) 300 Series PA Pump and Cooler Assemblies Pump and Cooler Assemblies with Air/Oil Heat Exchanger When compact gear drives require assistance to dissipate
More informationHose & Reel. Welding Reels. Arc Welding Gas Welding Cutting Operations
Hose & Reel P R O D U C T S Welding Reels Arc Welding Gas Welding Cutting Operations 2 Note to the designers & engineers. Welding Reels for Heavy Industry Hose & Reel Products hose reels for welding (Oxygen-acetylene
More informationINSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected)
CHRONOMITE INSTANT-FLOW WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No. Wattage
More informationFrequently Asked Questions Generators
Frequently Asked Questions Generators Fuel Related How much fuel do the generators use during normal operation? At exercise? The generator fuel consumption is given in each of the product knowledge books
More informationSKID STEER SPEC GUIDE
SKID STEER SPEC GUIDE ASV Inc. RC-50 $29,000 Caterpillar, 50 1,500 3,000 16.3 100 60 77 115 4,750 R-50 $28,000 Perkins, 50 1,500 3,000 16.3 100 60 77 115 4,750 RC-30 $22,000 Caterpillar, 31.5 800 1,600
More informationTABLE 1. Rugged cast aluminum alloy casing,celcon waterways with nichrome parts White (unless stainless steel housing)
CHRONOMITE INSTANT-FLOW MICRO WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No.
More informationTechnical Description LR 611 Crawler Loader
Technical Description LR 611 Crawler Loader Engine output 66 kw/90 HP Bucket capacity 1.0 1.2 m 3 /1.31 1.57 cu.yd. Hydrostatic travel drive The Better Machine. Diesel Engine Liebherr-Diesel Engine D 924
More informationRT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
More informationKobelco Extended Warranty Program. www.kobelco-europe.com
Kobelco Extended Warranty Program www.kobelco-europe.com Kobelco Extended Warranty is a convenient, value added way to give your Kobelco customers added security and peace of mind. Benefits of the Kobelco
More informationBUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
More information367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
More informationTopics of the Presentation
Drill Rig Safety Topics of the Presentation Personnel safety and monitoring PPE Health (Drugs and Alcohol) Drill Rig operation Safe set up procedures Safe operation of machine Safety related accidents
More informationLOADING DOCK EQUIPMENT. A. Section 03100 - Concrete Forms and Accessories: Placement of anchors into concrete.
LOADING DOCK EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Loading dock equipment of the following types: 1. Dock lifts. 2. Control stations. 1.2 RELATED SECTIONS A. Section 03100 - Concrete Forms and
More informationPRE-ASSEMBLED REMOTE REFRIGERATION SYSTEMS
NOR-LAKE, INCORPORATED 727 Second Street P.O. Box 248 Hudson, Wisconsin 54016 800-955-5253 715-386-2323 866-961-5253 Parts 800-388-5253 Service 715-386-4291 FAX www.norlake.com Split-Pak Pre-Assembled
More informationVolkswagen B3 Passat General-Engine 4 CYL. 19 Engine - Cooling System (Page GR-19)
19 Engine - Cooling System (Page GR-19) Cooling system draining and filling general information Body components, layout Engine components, layout Radiator fan run-on checking Recommended mixture ratios
More informationKNC Model 3666 Automatic Pressure Calibration System
KNC Model 3666 Automatic Pressure Calibration System Product Description The Model 3666 Automatic Pressure Calibration (APC) System by King Nutronics Corporation is a portable secondary standards laboratory
More informationCatalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI KSWA3... SW-3... Ball sert Type...9./2.... 42/6... 3 K2A... 3Z... Poppet sert Type...38/1... 3/... 4 CS41B... C4-3...
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationSpare Parts Program. Parts, Consumables & Accessories. 800.837.9711 superproductsllc.com
Spare Parts Program Parts, Consumables & Accessories TABLE OF CONTENTS Program Introduction 3 Body 4 5 Boom 5 6 Hydraulic 6 Lights & Accessories 7 Tubes, Nozzles & Hose Fittings 8 11 Vacuum 11 Water 12
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationCentrifugal Fans and Pumps are sized to meet the maximum
Fans and Pumps are sized to meet the maximum flow rate required by the system. System conditions frequently require reducing the flow rate. Throttling and bypass devices dampers and valves are installed
More informationASME Packaged Indirect Fired Water Heater
Utilizes Or HTHW To Heat Domestic Water, Semi-Instantaneous or Storage Type Model BW Features Reliable Only high grade materials used in construction to ensure long operating life Hydrastone cement lining
More informationHydraulic Compressor Module
Down Force Circuit 3/8 PTC Ports Hydraulic Compressor Module (Top 2 Shown With Plugs) Lift Force Circuit Tank Drain (Pull Cord) 10 Gallon Air Tank Down Pressure Gauge Lift Pressure Gauge 3/8 Quick-Connect
More informationCat Electronic Technician 2015A v1.0 Product Status Report 4/20/2016 2:49 PM
Page 1 of 19 Cat Electronic Technician 2015A v1.0 Product Status Report 2:49 PM Product Status Report Parameter Value Product ID WRK00337 Equipment ID WRK00337 Comments A01-52 C9 330D (THX37891) Parameter
More informationCooling Systems. Table of Contents
Cooling Systems Table of Contents Sub-Headings Safety 2 s 2 Cautions 2 Notes 2 Introduction 2 General Specifications 2 ISB Engine 2 ISC Engine 2 Caterpillar 3126 Engine 2 Types of Coolant 3 ISB Engine
More informationSKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationAsking Price: N/A Final Price: N/A OROPS BUCKET AUXILIARY HYDRAULICS GENERAL APPEARANCE. Good. Good
Page 1 of 6 SPECIFICATIONS 2005 CATERPILLAR 247B Customer Owned Certified MULTI TERRAIN LOADERS Inspection Number: 1117842 Serial #: MTL01706 Date Created: 09/23/2013 02:53:31 PM CDT Engine Serial #: N/A
More informationHydraulic Trouble Shooting
Hydraulic Trouble Shooting Hydraulic systems can be very simple, such as a hand pump pumping up a small hydraulic jack, or very complex, with several pumps, complex valving, accumulators, and many cylinders
More informationMASTER CYLINDER. Section 2. Master Cylinder. Tandem Master Cylinder. Master Cylinder
MASTER CYLINDER Master Cylinder The master cylinder converts the motion of the brake pedal into hydraulic pressure. It consists of the reservoir tank, which contains the brake fluid; and the piston and
More informationSpray Height Control System
Spray Height Control System Hagie 2100/2101/284/dts Installation Manual Improving the competitiveness of Industry and Agriculture through Precision Measurement Printed in Canada Copyright 2005-08 by NORAC
More information45 URAI DSL 816-741-0282. Roots. Quick Specs. Also Available in: Part Number T30353020
45 URAI DSL Part Number T30353020 Detachable steel mounting feet Rigid one piece cast iron casing Connections in standard pipe sizes Straight, precision machined two lobe impellers Splash oil lubricated
More informationMAC-120HE-01 Air-Cooled Chiller
MAC-120HE-01 Air-Cooled Chiller 10 Ton / 120,000 BTUH Air-Cooled Chiller 208/230-1-50/60 1 HVAC Guide Specifications Air-Cooled Liquid Chiller Nominal Size: 10 Tons Multiaqua Model Number: MAC-120HE-01
More informationCat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series
Cat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series Features Improved Machine Performance Unsurpassed Durability Increased Visibility Wide Range of Job Site Solutions Benefits
More informationRH 12.5 RH 16.5. Crawler Excavator Specifications
Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More informationLEWIS WINDROWER OWNER / OPERATOR MANUAL
LEWIS WINDROWER OWNER / OPERATOR MANUAL MODEL # WR-1 WINDROWER Manufactured by: LEWIS BROTHERS MANUFACTURING, INC. Post Office Box 146 Baxley, GA 31513 Tel: (912) 367-4651 Fax: (912) 367-3958 2-21-14 1
More informationJCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
More informationCustomer Owned Certified
TEREX BENFORD TA30 Customer Owned Certified OFF HIGHWAY TRUCKS Inspection Number: 751979 Serial #: A7991472 Date Created: 07/27/2011 07:46:05 AM CDT Engine Serial #: N/A Last Updated: 08/02/2011 07:10:48
More informationVEHICLE SERVICE DISPENSING SYSTEMS
VEHICLE SERVICE DISPENSING SYSTEMS Lincoln s LFC Family of Fluid Inventory Control and Management Systems Finally a complete offering of systems to meet the varying needs of vehicle service centers! Each
More informationCat Electronic Technician 2015C v1.0 Product Status Report 2/16/2016 9:19 AM
Cat Electronic Technician 2015C v1.0 Product Report 2/16/2016 9:19 AM Product Report Product ID Comments Unavailable H2A00626 3054 M313C (CRX13565) H2A00626 Engine Serial Number CRX13565 ECM Serial Number
More informationROTARY GEAR FLOW DIVIDERS
ROTARY GEAR FLOW DIVIDERS Concentric AB Innovation + Technology = Sustainability GC and D Series Rotary Gear Flow Dividers Intensifier - Combiner (European and U.S. Versions) Field-proven Concentric Hydraulic
More informationUB1 AIR CONDITIONING UNIT INSTALLATION INSTRUCTIONS
UB1 AIR CONDITIONING UNIT INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS: Carefully read these instructions before installing your new air-conditioner. AUSTRALIAN AUTOMOTIVE AIR AL00500054E 1 Table
More informationWildland Fire Remote Monitor
K A N S A S F O R E S T S E R V I C E KANSAS STATE UNIVERSITY Wildland Fire Remote Monitor For years, fire department administrators have struggled to find an alternative to having firefighters ride on
More informationPUMP MAINTENANCE SCHEDULE AND CHECKLISTS
PUMP MAINTENANCE SCHEDULE AND CHECKLISTS Providing a maintenance schedule defined specifically by run hours or yardage pumped serves only as a general guideline given the large amount of variables a unit
More informationFluid Monitoring and Inventory Management
SECTION FOUR Fluid Monitoring and Inventory Management Introduction Alemite meets your fluid monitoring and inventory management needs with its Accu-Guard systems and its Bigview Tank Monitor. These systems
More informationVolkswagen Golf 5 2004-> VW Rabbit GTI 2006->
Стр. 1 из 24 Volkswagen Golf 5 2004-> VW Rabbit GTI 2006-> 19-1 Cooling system components Warning! Hot steam may escape when opening expansion tank. Wear protective goggles and protective clothing to prevent
More informationModel 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
More informationCooling system components, servicing
19-1 Cooling system components, servicing WARNING! The cooling system is pressurized when the engine is warm. When opening the expansion tank, wear gloves and other appropriate protection, cover the cap
More informationThis kit may void factory warranty please check with manufacturer.
Mfg Company TM Thank you for purchasing a Sinister Manufacturing Company EGR delete kit. Precision manufactured using aircraft quality 304 stainless steel and billet aluminum; this EGR kit is designed
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationWHOLESALE DIRECT INC. 5620 WEST 65TH STREET
Auto Pump V 200 100 0 100 Max Rating Vehicle mount compressor ensures truck air brake system is properly pressurized for immediate dispatch from station Pressure switch regulated operation automatically
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 1 of 16 Accessories www.ktoutdoor.com 12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 2 of 16 Accessories
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 1 of 20 Carburetor Assembly www.ktoutdoor.com 13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 2 of 20 Carburetor Assembly 214763-02
More informationFDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
More information1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater.
Diesel Truck Engine 3126B 175-330 hp 420-860 @ 1440 rpm Peak CATERPILLAR ENGINE SPECIFICATIONS 6-Cylinder, 4-Stroke-Cycle Diesel Bore in (mm)... 4.33 (110) Stroke in (mm)... 5.0 (127) Displacement cu in
More informationCommercial Gas Furnace Upflow
Commercial Gas Furnace Upflow Model G24-200 80% A.F.U.E. 200,000 Btuh Input Heating Cap. 7.5 or 10 Tons Nominal Add-On Cooling GUK FEATURES Certified by A.G.A./C.G.A. Laboratories. Heavy gauge painted
More informationLine to Refrigerator Ice/Water Dispenser
Standard 18 Line to Refrigerator Ice/Water Dispenser Pump Module Bottled Water How The System Works The FLOJET Bottled Water Dispensing System was designed to pump water from a commercially available 5-gallon
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationSubject: Pre-Formed and Pre-Flared Hydraulic Brake Pipe Kits Now Available for Service
Subject: Pre-Formed and Pre-Flared Hydraulic Brake Pipe its Now Available for Service Models: 2000-2006 adillac Escalade Models 2000-2006 hevrolet Avalanche, Suburban, Tahoe 1999-2007 hevrolet Silverado
More informationNITROUS TRANSFER PUMP INSTRUCTIONS
NITROUS TRANSFER PUMP INSTRUCTIONS SAFETY TIPS Never directly inhale nitrous oxide. When inhaled in large quantities, nitrous oxide can cause respiratory ailments or in extreme cases, death by suffocation.
More informationHAMMER, BREAK, DESTROY, SMASH, CRACK, OBLITERATE, POUND, FLATTEN,
HAMMER, BREAK, DESTROY, SMASH, CRACK, OBLITERATE, POUND, FLATTEN, YOUR WAY THROUGH THE DAY. MOUNTED BREAKERS, VIBRATORY COMPACTORS, AND DROP HAMMERS CATEGORY MOUNTED YEAR 14-15 FORMAT PRODUCT CATALOG Hydraulic
More informationBoston, Venice, Kodiak. Enviro Wood Fireplace Inserts
Boston, Venice, Kodiak Enviro Wood Fireplace Inserts Why buy an Enviro Wood Insert? Up to 84.7% Efficiency - EPA approved and up to 84.7% efficiency - Enviro makes highly efficient wood inserts to help
More informationCOOLING SYSTEM ALL-ALUMINUM RACING RADIATORS??? NOT FOR THE STREET!
02/05/04 website A common problem with the V8 Datsun Z is overheating. Generally, they overheat due to insufficient air flow through the radiator, and because of inefficient radiator designs. Some radiator
More informationTOP AND CABINET PARTS For Models: WTW5500XW0, WTW5500XL0 (White) (Silver)
TOP AND CABINET PARTS AUTOMATIC WASHER 5 10 Litho in U.S.A. (drd)(bay) 1 Part No. Rev. A TOP AND CABINET PARTS 1 Literature Parts Installation Instructions W10240509 English/French W10240510 Spanish W10280477
More informationGeneral Dimensions and Weights - Non Loader
Home > Equipment > Tub Grinders > TG5000 TG5000 Specs General Dimensions and Weights - Non Loader Maximum Length - Transport 39.2' 12 m Maximum Length - Conveyor Unfolded 61.1' 18.6 m Maximum Width (Transport)
More informationwith Electronic Assistant
TECHNICAL DATASHEET #TDAX100200 BLDC Motor Drive Drives a 12V, 24V or 48V BLDC motor Bidirectional, up to 25A Smooth speed control using Hall Sensors CAN (SAE J1939) with Electronic Assistant Features:
More informationpicking or transportation capabilities.
Latch onto your full low level order picking or transportation capabilities. The new Hyster T5Z AC and T7Z AC Tow Tractors provide you the towing capacities to meet your needs. The 3-phase AC induction
More informationCooling system components, removing and installing
Page 1 of 34 19-1 Cooling system components, removing and installing WARNING! The cooling system is pressurized when the engine is warm. When opening the expansion tank, wear gloves and other appropriate
More informationHeavy Duty Industrial Air Compressors
HEAVY DUTY SERIES - VERTICAL TANK MOUNTED All units mounted on air receivers rated at 200 psi and CRN approved for Canada. All units may be ordered with magnetic starter (Starter supplied loose). All units
More informationREMOVAL AND INSTALLATION
303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214
More informationHOW HYDRAULIC TRUCK CRANES WORK
HOW HYDRAULIC TRUCK CRANES WORK Heavy rains spawned by Hurricane Danny flooded many parts of Charlotte, NC. Flood waters rose so quickly in Little Sugar Creek that the underpinnings of a train trestle
More informationCommercial Gas Water Heaters
POWERED BURNER MODELS LARGE-VOLUME POWERED BURNER FEATURES The large-volume powered burner line includes the largest, most powerful A. O. Smith tanktype gas water heaters. With tank capacities up to 600
More informationC18 ACERT Fire Pump Tier 3 448 bkw/600 bhp @ 1750 rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More information2013 Jetters. Ph: 800.771.1881 Fax: 877.526.3246. sales@sharkpw.com www.sharkpw.com. Effective January 1, 2013
2013 Jetters BROCHURE Effective January 1, 2013 Ph: 800.771.1881 Fax: 877.526.3246 sales@sharkpw.com www.sharkpw.com 2013 shark Jetters Brochure PH: 800.771.1881 FAX: 877-526-3246 JETTERS drain cleaners
More information