Series HSW SPST & SPDT PIN Switches
|
|
|
- Lily Cook
- 7 years ago
- Views:
Transcription
1 DESCRIPTION The HSW series of broadband PIN Diode switches covers the waveguide bands from GHz. The switches utilize a low loss finline structure with silicon or GaAs beam lead diodes for minimum insertion loss and maximum isolation. Superior performance in a compact size is featured in these designs. Gold plated housings are used to achieve maximum performance and reliability. Full waveguide band SPST units can be provided up to 6 GHz and 1 GHz bandwidths to 11 GHz. SPDT units have up to 1 GHz bandwidth. Many options of on/off ratio values are offered with low loss versions and isolation levels up to 6 db. Switches are available with or without drivers; TTL drivers are standard and ECL drivers are available as an option. Applications Attenuators AM Modulators General RF Switching Receiver Protection Integrated Systems Features Switching Options Driver Options Compact Design Low Loss High Isolation
2 3 C T CASE, Specifications subject to change w/o notice. Part Number Frequency (GHz) WG / Flange 2 (WR# / UG#) SPST Switches Maximum Bandwidth Insertion Loss (db) 1 Isolation (db) 1 Switching Speed (ns) 1,4 1-9% 9-1% HSW /U Full HSW /U Full HSW /U Full HSW /U Full HSW /U Full HSW /U Full HSW /U-M Full HSW /U-M Full HSW /U-M Full HSW /U-M Full HSW /U 1 GHz HSW /U 1 GHz HSW /U 1 GHz HSW /U 1 GHz HSW /U-M 1 GHz HSW /U-M 1 GHz Notes 1. Other on/off ratios, drivers, and switching speed options < 2ns available. 2. Other flange options available. 3. Operating temperature to + C. 4. E & W Band speeds can be improved to 7 ns with a 2 V driver option.
3 3 C T CASE, Specifications subject to change w/o notice. SPDT Switches Part Number Frequency (GHz) WG / Flange 2 (WR# / UG#) Bandwidth Insertion Loss db 1 Isolation db 1 Switching Speed (ns) 1,4 1-9% 9-1% HSW /U 1 GHz HSW /U 1 GHz HSW /U-M 1 GHz HSW /U-M 1 GHz HSW /U 1 GHz HSW /U 1 GHz HSW /U-M 1 GHz Notes 1. Other on/off ratios, drivers, and switching speed options < 2ns available. 2. Other flange options available. 3. Operating temperature to + C. 4. E & W Band speeds can be improved to 7 ns with a 2 V driver option.
4 Typical Data for HSW PIN Switches Ka-Band SPST Low Loss PIN Sw itch HSW281 Ka-Band SPST High Isolation PIN Switch HSW283 Insertion Loss (db) Insertio n Lo ss Iso latio n Frequency (GHz) Isolation (db) Insertion Loss (db) Frequency (GHz) Insertion Loss Iso latio n Isolation (db) W-Band SPST PIN Sw itch HSW Insertion Loss (db) Insertion Loss Iso latio n Frequency (GHz) Isolation (db) General Specifications Power Handling VSWR Bias Driver Delay, TTL Driver Spec compliant to +2 dbm Operates to +2 dbm without damage* 2.:1 (typ), 2.: E & W Band +. 1 ma, ma 2 ns typical *See Series HSWM PIN switches for higher power handling.
5 SPST PIN Switch Outlines Ka-Band SPST PIN Diode Switch B-Band (Q-Band) SPST PIN Diode Switch
6 SPST & SPDT PIN Switch Outlines W-Band SPST PIN Diode Switch V-Band SPDT PIN Diode Switch
7 Requesting quotes When requesting a quote for HSW PIN Switches, please specify required frequency range, isolation level and any other required specifications. HSW switches are built to order and will be optimized for the bandwidth specified by the customer. The part number guide below can also be used as a reference for requesting quotes. HSW / XXX Assigned by factory Option: Add flange # for non-standard flange Attenuation Option (See table below) Frequency Band (WR #) Number of switch arms: Use 2 for SPDT, leave blank for SPST HXI Model # On/Off Ratio and Driver Options Option # Insertion Loss / Isolation Logic States 1 Standard Unit (low loss) Logic 1 = Low Loss State 2 Standard Unit (low loss) Logic 1 = Isolation State 3 High Isolation Logic 1 = Low Loss State 4 High Isolation Logic 1 = Isolation State Option Deleted Option Deleted 6 Option Deleted Option Deleted 7 Low Loss, Faster Switching Logic 1 = Low Loss State 8 Low Loss, Faster Switching Logic 1 = Isolation State 9 High Isolation, Faster Switching Logic 1 = Low Loss State 1 High Isolation, Faster Switching Logic 1 = Isolation State 11 Custom
MASW-000823-12770T. HMIC TM PIN Diode SP2T 13 Watt Switch for TD-SCDMA Applications. Features. Functional Diagram (TOP VIEW)
Features Exceptional Loss = 0.35 db Avg @ 2025 MHz, 20mA Exceptional Loss = 0.50 db Avg @ 2025 MHz, 20mA Higher - Isolation = 31dB Avg @ 2025 MHz, 20mA Higher RF C.W. Input Power =13 W C.W.(-Ant Port)
Parameter Min. Typ. Max. Units. Frequency Range 30 50 GHz. Minimum Insertion Loss 1.9 4.7 db. Dynamic Range @ 38 GHz 26 db
EWA51ZZ 3-5 GHz GaAs MMIC September 29 Rev 4 Bare Die Features Broadband Performance: 3 to 5 GHz Dynamic Range: 26 db, typical Input IP3: +13 dbm, typical (any attenuation) Dual Voltage Control: -1.5 to
MASW-007070-0001TB. GaAs SPST Switch, Absorptive, Single Supply, DC-4.0 GHz. Features. Pin Configuration 1,2,3,4. Description. Ordering Information
Features Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Low DC Power Consumption 50 Ohm Nominal Impedance Test Boards are Available Tape and Reel are Available Lead-Free 4 x 6 mm PQFN Package
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY SERIES RF121 RELAY TYPE RF Magnetic-Latching, SPDT, Through-hole Relay DESCRIPTION The ultraminiature RF121 relay is built on Teledyne
MILLIMETER-WAVE DEVICES
MILLIMETER-WAVE DEVICES SECTION V PAGE Green 375 X-BAND WAVEGUIDE DEVICES, WR-90 (8.2 to 12.4GHz)...47 WAVEGUIDE DEVICES, WR-75 (10 to 15GHz)...48 Ku -BAND WAVEGUIDE DEVICES, WR-62 (12.4 to 18GHz)...49
CONTENTS. Elmika warrants each product of its manufacture to be free from defects in material and workmanship.
CONTENTS Directional Couplers 1 Magic Tee Hybrid Couplers 2 Fixed Attenuators 3 Level Set attenuators 4 Direct Reading Attenuators 5 E-Plane Bends 6 H-Plane Bends 7 Straight Sections 8 Twists 9 Terminations
Switch Selection Guide
Switch Selection Guide FREQUENCY RANGE (GHz) 0.1 0.2 0.5 1 2 4 8 12.4 18 40 0.1 18 SWITCHES WITH INTEGRATED DRIVERS MODEL OR SERIES PAGE REFLECTIVE SPST SWITCHES* DM86, FM86 DM86H, FM86H 1 18 F91 0.2 4
23-26GHz Reflective SP4T Switch. GaAs Monolithic Microwave IC in SMD leadless package
CHS2411-QDG Description GaAs Monolithic Microwave IC in SMD leadless package The CHS2411-QDG (CHS2412-QDG, see Note) is a monolithic reflective SP4T switch in K-Band. Positive supply voltage only is required.
General Information. Lower Frequency Models Custom Designs Special Flanges Narrow Band Specials VSWR. Frequency ( GHz) COMMON SPECIFICATIONS
Waveguide Adapters General Information DC - 26.5 GHz High Performance 1.15 Typical VSWR Male or Female Connectors available Choke Flange Types available -65 o C to +125 o C Operating Temperature Midwest
Microwave Components. J & N Microwave and Engineering. Product Catalogue 2010 Version 2.0
Product Catalogue 2010 Version 2.0 Contents Contact Details i Waveguide Loads/Terminations 1 Low Power Short Waveguide Terminations 2 Medium Power Short Waveguide Terminations 3 Higher Power Waveguide
14.5GHZ 2.2KW CW GENERATOR. GKP 22KP 14.5GHz WR62 3x400V
14.5GHZ 2.2KW CW GENERATOR GKP 22KP 14.5GHz WR62 3x400V UTILIZATION OF GKP 22KP GENERATOR With its characteristics of power stability whatever the load, very fast response time at a pulse, low ripple,
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES RF00 RF00D RF00DD RF0 RF0D RF0DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient suppression Repeatable,
Waveguide Coaxial Transitions
Waveguide Coaxial Transitions Coaxial Adaptors RA SERIES The Waveguide Solution offers a standard range of Waveguide to Coaxial Adaptors. All designs have been optimised to offer high performance within
MADR-009443-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators. Functional Schematic. Features. Description. Pin Configuration 2
Features Functional Schematic High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost 4x4 mm, 20-lead PQFN Package 100% Matte
VDI Mixer/Amplifier/Multiplier Chains (MixAMCs)
VDI Mixer/Amplifier/Multiplier Chains (MixAMCs) VDI s MixAMCs provide high performance broadband downconversion and frequency extension of microwave spectrum analyzers into the THz range. Models are currently
0HDVXULQJWKHHOHFWULFDOSHUIRUPDQFH FKDUDFWHULVWLFVRI5),)DQGPLFURZDYHVLJQDO SURFHVVLQJFRPSRQHQWV
0HDVXULQJWKHHOHFWULFDOSHUIRUPDQFH FKDUDFWHULVWLFVRI5),)DQGPLFURZDYHVLJQDO SURFHVVLQJFRPSRQHQWV The treatment given here is introductory, and will assist the reader who wishes to consult the standard texts
TQP4M3019 Data Sheet. SP3T High Power 2.6V 2x2 mm CDMA Antenna Switch. Functional Block Diagram. Features. Product Description.
Functional Block Diagram Product Description TriQuint s TQP4M3019 is a high power antenna switch in a single pole three throw (SP3T) configuration. The die utilizes TriQuint s PHEMT MMIC switch process
MADR-009269-0001TR. Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V1. Functional Schematic. Features.
Features High Voltage CMOS Technology Complementary Outputs Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Plastic SOIC-8 Package 100% Matte Tin Plating over
MAAD-007084-0001TB. Digital Attenuator 15.5 db, 5-Bit, TTL Driver, DC-2.0 GHz Rev. V2. Features. Schematic with Off-Chip Components.
MAAD-007084-00000 5.5, 5-Bit, TTL Driver, DC-2.0 GHz Rev. 2 Features Attenuation: 0.5 Steps to 5.5 Low DC Power Consumption Integral TTL Driver 50 ohm Impedance Test Boards are Available Tape and Reel
S-PARAMETER MEASUREMENTS OF MEMS SWITCHES
Radant MEMS employs adaptations of the JMicroTechnology test fixture depicted in Figure 1 to measure MEMS switch s-parameters. RF probeable JMicroTechnology microstrip-to-coplanar waveguide adapter substrates
TS5010 TeraTune Programmable Bandpass Filter
FEATURES 0MHz to 90MHz Tunability 240 Frequency Steps Constant Q, Two-pole Butterworth Bandpass 1W Power Handling 0µs Tuning Speed Serial/Parallel Modes -40C to +85C DESCRIPTION The TS5010 series of TeraTune
MADR-009190-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. 4. Functional Schematic. Features.
Features High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Lead-Free SOIC-16 Plastic Package Halogen-Free Green Mold Compound
PHASE SHIFT DUPLEXERS
-PORT WAVEGUIDE DIFFERENTIAL PHASE SHIFT CIRCULATORS (DUPLEXERS) AVERAGE POWER KW 00 0 DIFFERENTIAL PHASE SHIFT DUPLEXERS WAVEGUIDE TECHNOLOGY COAXIAL TECHNOLOGY 0. 0 00 FREQUENCY GHz General description
Low Cost, Triple Balanced, LTCC Mixer
Low Cost, Triple Balanced, LTCC Mixer Introduction Double Balanced Mixers are used widely in frequency translation applications. Some of the advantages of the double balanced mixer are good L-R and L-I
LED Driver: LT10. EuP2. Features. Approvals IP20. Markets & Applications. Engineering Drawing. Technical Data
LED Driver: LT10 LT10-16 1-15 VDC 700 ma 1895089 LT10-32 2-30 VDC 350 ma 1895008 High Efficiency: Typ. 83% Low Standby Losses 0,2W LED Driver: LT10 DB LT10-16 1-15 VDC 700 ma 1895542 LT10-32 2-30 VDC 350
Delivering Dependable Performance... A Spectrum of Radar Solutions
We work with you M/A-COM Technology Solutions is an industry leader in the design, development, and manufacture of radio frequency (RF), microwave and millimeter wave semiconductors, components and technologies.
JITAI Technology Co., LTD. Your 1 st Partner. Product Catalog. Microwave Passive Device Design and Manufacture
Technology Co., LTD. Your 1 st Partner Product Catalog Microwave Passive Device Design and Manufacture CONTENTS Rotary Joints Single Channel Rotary Joints Microwave Passive Device Design and Manufacture
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The HMC547LP3
New GaN FETs, Amplifiers and Switches Offer System Engineers a Way to Reduce RF Board Space and System Prime Power
New GaN FETs, Amplifiers and Switches Offer System Engineers a Way to Reduce RF Board Space and System Prime Power By: TriQuint Semiconductor, Inc. Dean White, Defense Products & Foundry Services, Business
HP 8970B Option 020. Service Manual Supplement
HP 8970B Option 020 Service Manual Supplement Service Manual Supplement HP 8970B Option 020 HP Part no. 08970-90115 Edition 1 May 1998 UNIX is a registered trademark of AT&T in the USA and other countries.
GaAs Switch ICs for Cellular Phone Antenna Impedance Matching
GaAs Switch ICs for Cellular Phone Antenna Impedance Matching IWATA Naotaka, FUJITA Masanori Abstract Recently cellular phones have been advancing toward multi-band and multi-mode phones and many of them
Mi-Wave. 5 to 325 GHz. Millimeter Wave Products Inc.
Millimeter Wave Products Inc. June 2006 Edition WR-03 WR-04 WR-05 WR-06 WR-08 WR-10 WR-12 WR-15 WR-19 WR-22 WR-28 WR-34 WR-42 WR-51 WR-62 WR-75 WR-90 WR-112 WR-137 Microwave / Millimeter Wave Components
Wideband Driver Amplifiers
The driver amplifier is a wideband, 1 khz to 4 GHz amplifier intended for use in broadband microwave and high data rate systems. The is a 3-stage high output power modulator driver amplifier that can provide
Agilent P940xA/C Solid State PIN Diode Switches
Agilent P940xA/C Solid State PIN Diode Switches Operating and Service Manual Agilent Technologies Notices Agilent Technologies, Inc. 2007 No part of this manual may be reproduced in any form or by any
Technical Datasheet Scalar Network Analyzer Model 8003-10 MHz to 40 GHz
Technical Datasheet Scalar Network Analyzer Model 8003-10 MHz to 40 GHz The Giga-tronics Model 8003 Precision Scalar Network Analyzer combines a 90 db wide dynamic range with the accuracy and linearity
PS323. Precision, Single-Supply SPST Analog Switch. Features. Description. Block Diagram, Pin Configuration, and Truth Table. Applications PS323 PS323
Features ÎÎLow On-Resistance (33-ohm typ.) Minimizes Distortion and Error Voltages ÎÎLow Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, 2pC typ. ÎÎSingle-Supply Operation (+2.5V to
MAPD-007530-0001TB. Low Cost Two-Way GMIC SMT Power Divider 1700 2000 MHz Rev. V2. Features. Functional Diagram. Description. Ordering Information
Features Small Size and Low Profile Typical Insertion Loss: 0.6 db Typical Amplitude Balance: 0.2 db 1 Watt Power Handling Lead-Free SOT-26 Package 100% Matte Tin Plating over Copper Halogen-Free Green
Silicon Schottky Barrier Diode Bondable Chips and Beam Leads
DATA SHEET Silicon Schottky Barrier Diode Bondable Chips and Beam Leads Applications Detectors Mixers Features Available in both P-type and N-type low barrier designs Low 1/f noise Large bond pad chip
High Performance Switched Filter Banks
High Performance Switched Filter Banks Switched Filter Banks API Technologies, a leading designer & manufacturer of RF filters and switches, is uniquely able to optimize Switched Filter Bank designs by
R&S ZCxxx Millimeter-Wave Converters Specifications
ZCxxx_dat-sw_en_3607-1471-22_v0200_cover.indd 1 Data Sheet 02.00 Test & Measurement R&S ZCxxx Millimeter-Wave Converters Specifications 21.07.2015 15:09:16 CONTENTS Definitions... 3 General information...
Penn Engineering PENN. Quality Microwave Components ENGINEERING. ~since 1971~ (661) 295-2080. 29045 Avenue Penn Valencia, California 91355-5426
Penn Engineering C O M P O N E N T S Quality Microwave Components ~since 1971~ 2 Established in California in 1971, Penn Engineering has many years of Experience and Knowledge in Designing and Manufacturing
APSYN420A/B Specification 1.24. 0.65-20.0 GHz Low Phase Noise Synthesizer
APSYN420A/B Specification 1.24 0.65-20.0 GHz Low Phase Noise Synthesizer 1 Introduction The APSYN420 is a wideband low phase-noise synthesizer operating from 0.65 to 20 GHz. The nominal output power is
TECHNOTES. TD1001: The best RF protector for applications not requiring dc on the coax.
TD1001: The best RF protector for applications not requiring dc on the coax. CONTENTS Abstract 3 Introduction 3 Technology and Testing Overview 4 Test results 4 Let-through Voltage Graphs 10 Conclusions
inter-chip and intra-chip Harm Dorren and Oded Raz
Will photonics penetrate into inter-chip and intra-chip communications? Harm Dorren and Oded Raz On-chip interconnect networks R X R X R X R X R T X R XT X T X T X T X X Electronic on-chip interconnect
R&S SMZ Frequency Multiplier Specifications
Test & Measurement Data Sheet 02.00 R&S SMZ Frequency Multiplier Specifications CONTENTS Definitions... 3 Specifications... 4 RF performance...4 Frequency...4 Level...4 Spectral purity...4 Connectors...5
OMNIYIG. .5 TO 2 GHz, 1 TO 4 GHz, 6 to 18 GHz Thin Film YIG-TUNED OSCILLATORS OUTLINE DIMESIONS MOUNTING SURFACE GND +15V + TUNE - HTR HTR
. TO Hz, 1 TO Hz, to 1 Hz Thin Film YITUNED OSCILLATORS Highly Reliable StateoftheArt ThinFilm Technology s. to 1 Hz oscillators employ thinfilm technology, coupled with aas FET transistors, and were designed
13.5-40.5GHz Frequency Multiplier. GaAs Monolithic Microwave IC. Output power (dbm) -10 -15 -20 -25 -30
Output power (dbm) GaAs Monolithic Microwave IC Description The is a packaged monolithic time three multiplier which integrates input and output buffer. This circuit is a very versatile multiplier for
AP331A XX G - 7. Lead Free G : Green. Packaging (Note 2)
Features General Description Wide supply Voltage range: 2.0V to 36V Single or dual supplies: ±1.0V to ±18V Very low supply current drain (0.4mA) independent of supply voltage Low input biasing current:
NBB-402. RoHS Compliant & Pb-Free Product. Typical Applications
Typical Applications Narrow and Broadband Commercial and Military Radio Designs Linear and Saturated Amplifiers 0 RoHS Compliant & Pb-Free Product NBB-402 CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO
XX1007-QT-EV1. Doubler 13.5-17.0/27.0-34.0 GHz. Features. Functional Block Diagram. Description. Pin Configuration. Absolute Maximum Ratings
XX17-QT 13.-17./27.-34. GHz Features Integrated Gain, and Driver Stages Single Positive Supply, +V Integrated Bypassing Capacitor +2. dbm Output Saturated Power 3. dbc Fundamental Suppression On-Chip ESD
High-Speed, Low-Glitch D/CMOS Analog Switches
G6, G62, G63 High-Speed, Low-Glitch /CMOS Analog Switches ESCRIPTION The G6, G62, G63 feature high-speed lowcapacitance lateral MOS switches. Charge injection has been minimized to optimize performance
Microwave Oscillators
Microwave Oscillators General Microwave Corporation has been a leader in the field of microwave PIN diode control components for more than 30 years. A natural extension to its product line, microwave oscillators,
RF Communication System. EE 172 Systems Group Presentation
RF Communication System EE 172 Systems Group Presentation RF System Outline Transmitter Components Receiver Components Noise Figure Link Budget Test Equipment System Success Design Remedy Transmitter Components
CMOS 5GHz WLAN 802.11a/n/ac RFeIC WITH PA, LNA, AND SPDT
CMOS 5GHz WLAN 802.11a/n/ac RFeIC WITH PA, LNA, AND SPDT Description RFX8055 is a highly integrated, single-chip, single-die RFeIC (RF Front-end Integrated Circuit) which incorporates key RF functionality
COMMUNICATION PRODUCTS
COMMUNICATION Synthesized Frequency Up- And Downconverters Single-, Dual-, Tri- and Quad-Band High Performance Outdoor Block Converters (:) Redundant LNB System (:) Redundant LNB Controller 9800 Series
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter Description: The NTE2053 is a CMOS 8 bit successive approximation Analog to Digital converter in a 20 Lead DIP type package which uses a differential
Low Cost, Triple Balanced, LTCC Mixer
Low Cost, Triple Balanced, LTCC Mixer Introduction Double Balanced Mixers are used widely in frequency translation applications. Some of the advantages of the double balanced mixer are good L-R and L-I
SKY13380-350LF: 20 MHz-3.0 GHz High Power SP4T Switch With Decoder
DATA SHEET SKY13380-350LF: 20 MHz-3.0 GHz High Power SP4T Switch With Decoder Applications GSM/WCDMA/EDGE datacards and handsets Mobile high power switching systems Features Broadband frequency range:
Frequency Range Extension of Spectrum Analyzers with Harmonic Mixers
Products FSEM21/31 and FSEK21/31 or FSEM20/30 and FSEK20/30 with FSE-B21 Frequency Range Extension o Spectrum Analyzers with Harmonic Mixers This application note describes the principle o harmonic mixing
1. The Slotted Line. ECE 584 Microwave Engineering Laboratory Experiments. Introduction:
ECE 584 Microwave Engineering Laboratory Experiments 1. The Slotted Line Introduction: In this experiment we will use a waveguide slotted line to study the basic behavior of standing waves and to measure
User Guide Ku Band Solid State Amplifiers SSPA Redundant Configuration
User Guide Ku Band Solid State Amplifiers SSPA Redundant Configuration Outdoor Band Solid State Amplifier System Redundant Configuration User Guide This section provides general information for the UPCOM
DVT913 TV CHANNEL CONVERTER
Broadband Cable Networks 1(5) DVT913 TV CHANNEL CONVERTER General DVT913 is a TV Channel Converter for the DVX tend product family. It consists of an input down converter from to, a high selectivity part
INTELLIGENT INTERACTIVE SYNTHESIZER SURFACE MOUNT MODEL: MFSH615712-100
SURFACE MOUNT MODEL: MFSH6572 65-72 MHz FEATURES: Small Size, Surface Mount (.6" x.6") Low Phase Noise Standard Programming Interface Ultra Wide Tuning Range Lead Free - RoHS Compliant Patented REL-PRO
Series CCR-38S/CR-38S Multi-Throw DC 18 GHz/DC-22 GHz Normally Open Coaxial Switch
PART NUMBER CCR-38S CR-38S DESCRIPTION Commercial Normally Open Multi-throw, DC-8GHz Elite Normally Open Multi-throw, DC-22GHz The CCR-38S/CR-38S is a broadband, multi-throw, electromechanical coaxial
Cryogenic Performance of Millitech Model FBI-22 Waveguide Isolator.
THE AUSTRALIA TELESCOPE NATIONAL FACILITY AT Technical Document Series AT/39.3/127 May 2, 2006 Cryogenic Performance of Millitech Model FBI-22 Waveguide Isolator. Russell Bolton Russell Gough Two model
RF Power Amplifier PA10W Owner s Manual SpinCore Technologies, Inc. http://www.spincore.com
RF Power Amplifier PA10W Owner s Manual SpinCore Technologies, Inc. http://www.spincore.com Congratulations and thank you for choosing a design from SpinCore Technologies, Inc. We appreciate your business!
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.71 HMC42ST8 / 42ST8E AMPLIFIER,.4-2.2
Index. 2.40 mm Connector Series. 2.40 mm Connectors (50 GHz)... Page. Interface Standards... 44. Specifications... 45. Connector Numbers...
Connector Series Index (50 GHz).... Page Interface Standards... 44 Specifications... 45 Connector Numbers... 46 Typical Test Data... 48 End : can be found in the Adapter section. : can be found in the
SKYA21012: 20 MHz to 6.0 GHz GaAs SPDT Switch
DATA SHEET SKYA2112: 2 MHz to 6. GHz GaAs SPDT Switch Automotive Applications INPUT Infotainment Automated toll systems Output1 Output2 Garage door opener 82.11 b/g/n WLAN, Bluetooth systems Wireless control
1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604
a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On
PI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.
Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and
How To Use A Sound Card With A Subsonic Sound Card
!"## $#!%!"# &"#' ( "#' )*! #+ #,# "##!$ -+./0 1" 1! 2"# # -&1!"#" (2345-&1 #$6.7 -&89$## ' 6! #* #!"#" +" 1##6$ "#+# #-& :1# # $ #$#;1)+#1#+
PIN and Limiter Diodes
PIN and Limiter Diodes Features Limiter diodes Low-distortion performance Low loss Excellent power handling Available in single, series pair and low inductance configurations Application: Used as a passive
W1 Connector W1 Adapter W1 Termination
Data Sheet W1 Connector W1 Adapter W1 Termination DC to 110 GHz A complete coaxial connector system with mode-free performance to 110 GHz Features Excellent RF Performance to 110 GHz 50Ω Impedance Low
1. Straight Sections
Milan Chyba www.milanchyba.cz e-mail: milan.chyba@milanchyba.cz Gorkého 2174, 530 02 Pardubice, Czech Republic tel. ++420 463 303 896, mob. ++420 723 666 784 Waveguide Components Table of Contents 1. Straight
Symbol Parameters Units Frequency Min. Typ. Max. 850 MHz 14.8 16.3 17.8
Product Description Sirenza Microdevices SGC-689Z is a high performance SiGe HBT MMIC amplifier utilizing a Darlington configuration with a patented active-bias network. The active bias network provides
Keysight Technologies RF and Microwave Test Accessories
Keysight Technologies RF and Microwave Test Accessories Catalog Switches Attenuators Amplifiers Attenuator/Switch Drivers Adapters & Connectors Mixers Directional Couplers Power Dividers & Splitters Power
DATA SHEET SE2425U : 2.4 GHz Bluetooth Power Amplifier IC. Applications. Product Description. Features. Ordering Information
Applications Bluetooth tm wireless technology (Class 1) USB dongles, PCMCIA, flash cards, Access Points Enhanced data rate Features Integrated input and inter-stage match +25 dbm GFSK Output Power +19.5
Spectrum Compact 2013
Spectrum Compact 2013 Applications Using Spectrum Compact during different stages MW radio lifecycle: Site survey Verifying radio configuration Seeking free channels Finding interference Radio link installation
Agilent E4401B, E4402B, E4404B, E4405B, and E4407B ESA-E Series Spectrum Analyzers
Agilent, E4402B, E4404B, E4405B, and E4407B ESA-E Series Spectrum Analyzers Technical Specifications All specifications apply over 0 C to + 55 C unless otherwise noted. The analyzer will meet its specifications
CMOS 1.8 V to 5.5 V, 2.5 Ω SPDT Switch/2:1 Mux in Tiny SC70 Package ADG779
CMO 1.8 V to 5.5 V, 2.5 Ω PT witch/2:1 Mux in Tiny C70 Package AG779 FEATURE 1.8 V to 5.5 V single supply 2.5 Ω on resistance 0.75 Ω on-resistance flatness 3 db bandwidth >200 MHz Rail-to-rail operation
MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches
19-652; Rev 1; 8/12 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate
Agilent. E5071C ENA Network Analyzer. E5092A Configurable Multiport Test Set. Data Sheet
Agilent E5071C ENA Network Analyzer 9 khz to 4.5/6.5/8.5 GHz 100 khz to 4.5/6.5/8.5 GHz (with bias tees) 300 khz to 14/20 GHz (with bias tees) E5092A Configurable Multiport Test Set Data Sheet Table of
GaN High Power Amplifiers: Optimal Solutions Addressing Pico to Macro BTS Demands
GaN High Power Amplifiers: Optimal Solutions Addressing Pico to Macro BTS Demands David Runton; Engineering Director, PBBU David Aichele; Marketing Director, PBBU IWPC Atlanta 2012 IWPC Chicago 2010 1
DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD OF INSERTION LOSS MEASUREMENT
INCH-POUND MIL-STD-220C 14 May 2009 SUPERSEDING MIL-STD-220B 24 January 2000 DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD OF INSERTION LOSS MEASUREMENT AMSC N/A FSC EMCS FOREWORD 1. This standard
3-5 Ka-band High Power Multi-port Amplifier (MPA)
3-5 Ka-band High Power Multi-port Amplifier (MPA) KURODA Tomonori, SHIMADA Masaaki, OGAWA Yasuo, HOSODA Ikuo, KATAKAMI Kanji, MOTOHASHI Yasuo, NAKAZAWA Minoru, and KITAHARA Masaki Ka-band High Power Multi-port
Jeff Thomas Tom Holmes Terri Hightower. Learn RF Spectrum Analysis Basics
Jeff Thomas Tom Holmes Terri Hightower Learn RF Spectrum Analysis Basics Learning Objectives Name the major measurement strengths of a swept-tuned spectrum analyzer Explain the importance of frequency
Phase Shifters. Relation between Propagation Constant, Phase Shift, Delay, and Wavelength
Phase Shifters Iulian Rosu, YO3DAC / VA3IUL, http://www.qsl.net/va3iul/ Phase Shifters are devices, in which the phase of an electromagnetic wave of a given frequency can be shifted when propagating through
DG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES
Low Voltage, 0.4 Ω, Dual SPDT Analog Switch DG273/2732/2733 DESCRIPTION The DG273/2732/2733 are low voltage, low on-resistance, dual single-pole/double-throw (SPDT) monolithic CMOS analog switches designed
SIGNAL GENERATORS and OSCILLOSCOPE CALIBRATION
1 SIGNAL GENERATORS and OSCILLOSCOPE CALIBRATION By Lannes S. Purnell FLUKE CORPORATION 2 This paper shows how standard signal generators can be used as leveled sine wave sources for calibrating oscilloscopes.
DG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS
High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6
Attenuator Integrated With Input Tap (voltage control)
etmems TM Variable Optical Attenuator Integrated With Input Tap (voltage control) (US patent 8,666,218 and other patents pending) Features VOA + Tap Compact Size Low Cost High Reliability Low IL, PDL,
RC-1SP4T-A18. Key Features. Mini-Circuits www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.
Xtra Long Life 100 million cycles USB/Ethernet RF Switch Matrix DC to 18 GHz The Big Deal USB or Ethernet-TCP/IP (HTTP and Telnet protocols) control Capable of 100 million cycles SP4T electromechanical,
RF Switches Guide Signals In Smart Phones
RF Switches Guide Signals In Smart Phones The myriad of different bands, modes, radios, and functionality found in a modern smart phone calls for the increased use of simple, high-performance RF switches
Welcome. Rulon VanDyke RF System Architect, Agilent Technologies. David Leiss Senior RF Simulation Consultant, Agilent Technologies
Welcome Rulon VanDyke RF System Architect, Agilent Technologies David Leiss Senior RF Simulation Consultant, Agilent Technologies January 12, 2012 Agenda RF Architecture Definition Costs of Poor Architecture
Application Note Noise Frequently Asked Questions
: What is? is a random signal inherent in all physical components. It directly limits the detection and processing of all information. The common form of noise is white Gaussian due to the many random
USB I/O CONTROL BOX 8 relays, 8 digital I/O lines and 8 HV inputs
USB I/O CONTROL BOX 8 relays, 8 digital I/O lines and 8 HV inputs The Big Deal USB HID device compatible with 32/64 Bit operating systems 8 TTL/LVTTL digital I/O channels, 8 High Voltage digital inputs
Achieving New Levels of Channel Density in Downstream Cable Transmitter Systems: RF DACs Deliver Smaller Size and Lower Power Consumption
Achieving New Levels of Channel Density in Downstream Cable Transmitter Systems: RF DACs Deliver Smaller Size and Lower Power Consumption Introduction By: Analog Devices, Inc. (ADI) Daniel E. Fague, Applications
AC3200 INTELLIGENT BROADBAND AMPLIFIER
Kari Mäki 9.4.2013 1(7) AC3200 INTELLIGENT BROADBAND AMPLIFIER AC3200 is the latest leading-edge addition to AC family with extended frequency and gain ranges and integrated electrical controls in both
APPLICATION NOTES POWER DIVIDERS. Things to consider
Internet Copy Rev A Overview Various RF applications require power to be distributed among various paths. The simplest way this can be done is by using a power splitter/divider. Power dividers are reciprocal