Joint Committee Issue Document

Transcription

1 Joint Committee Issue Document NOTE: An issue document may be submitted at any time it comprises two parts: the cover sheet (this page) and a description of the issue to be submitted to the Joint Committee (following page). A separate issue form is required for each issue submitted. Issue papers include proposals for modification of a standard, information reports and (of current research, etc.). An issue paper shall be categorized as being for ACTION or for INFORMATION. Submitters should limit the Issue Paper to 1 or 2 pages attachments detailing full recommendations or background information may be attached with supplementary information. The Chairperson of the appropriate Joint Committee will respond within 30 days of receipt of the issue document advising what steps will be taken. Any issue document intended for discussion at a Joint Committee meeting must be received at least 21 days prior to the meeting to ensure inclusion in the agenda. Submit to: NSF International Attn: Standards Department 789 Dixboro Rd. Ann Arbor, Michigan Fax: standards@nsf.org Submitter s contact information: Name: Company: Scott Randall NSF International Mailing Address: 789 N Dixboro Road City: Ann Arbor State: MI Zip Code:48105 Telephone Number: randall@nsf.org I hereby grant NSF International the non-exclusive, royalty free rights, including non-exclusive, royalty free rights in copyright; in this item and I understand that I acquire no rights in any publication of NSF International in which this item in this or another similar or analogous form is used. Signature of Submitter * Scott Randall Date:_10/26/12 *Type written name will suffice as signature

2 Please insert a check (X) in the appropriate place to indicate if you wish the item to be considered as an action item or as an information item. Action X Information NSF Standard(s) Impacted: NSF 61 Issue Statement: Provide a concise statement of the issue, which reference as appropriate any specific section(s) of the standard(s) that are related to the issue. Request to ballot additional material specific analyses for additional materials to NSF 61 Table 3.1. Also sort material names in alphabetical order. Background: Provide a brief background statement indicating the cause and nature of concern, the impacts identified relevant to public health, public understanding, etc, and any other reason why the issue should be considered by the Committee. NSF is proposing minimum test batteries for several additional materials to be added to NSF 61. Recommendation: If action by the Joint Committee is being requested, clearly state what action is needed: e.g., recommended changes to the standard(s) including the current text of the relevant section(s) indicating deletions by use of strike-out and additions by highlighting or underlining; e.g., reference of the issue to a Task Force for detailed consideration; etc. If recommended text changes are more than a half page, please attach a separate document.

3 Pipe/fitting/device materials Aluminum aaluminum oxide ceramics zirconium oxide ceramics silicon carbide ceramics Ruby or sapphire (natural and synthetic aluminum oxide gemstones) aasphaltic-coated ductile iron regulated metals 2, aluminum regulated metals 2, aluminum regulated metals 2, zirconium regulated metals 2, silicon regulated metals 2, aluminum Brass Carbon graphite nonimpregnated Carbon graphite (phenol formaldehyde impregnated) Carbon Steel regulated metals 2 Cast Iron regulated metals 2 Chrome/nickel plating cconcrete Copper regulated metals 2 Ductile iron regulated metals 2 ggalvanized steel regulated metals 2, zinc, nickel Magnets Metals 14 Nickel based alloys regulated metals 2, nickel Platinum regulated metals 2, platinum Quartz regulated metals 2 Ruby or sapphire (natural and synthetic aluminum oxide regulated metals 2, aluminum gemstones) Silicon carbide ceramics Silver sstainless steel Titanium Tungsten Carbide Zirconium oxide ceramics Carbon graphite nonimpregnated Carbon graphite (phenol formaldehyde impregnated) GC/MS base/neutral scan (specific for carbonyls and non-aromatic hydrocarbons) 1, volatile organic chemicals (VOCs), polynuclear aromatic hydrocarbons (PNAs), regulated metals 2, molybdenum, vanadium, manganese regulated metals 2, zinc, nickel GC/MS 1, VOCs, polynuclear hydrocarbons (PNAs), regulated metals 2, GC/MS 1, VOCs, polynuclear hydrocarbons (PNAs), formaldehyde, regulated metals 2, regulated metals 2, nickel GC/MS 1, regulated metals 2, dioxins and furans, radionuclides, glycols and ethanolamines 12 regulated metals 2, silicon regulated metals 2, silver regulated metals 2, nickel regulated metals 2, titanium regulated metals 2, tungsten regulated metals 2, zirconium GC/MS 1, VOCs, polynuclear hydrocarbons (PNAs), regulated metals 2, GC/MS 1, VOCs, polynuclear hydrocarbons (PNAs), formaldehyde, regulated metals 2

4 Plastic materials aacetal (AC)/polyoxymethylene (POM) Acrylonitrile-butadiene-styrene (ABS) Acrylonitrile-styrene (SAN) ccross linked polyethylene (PEX) formaldehyde, VOCs, regulated metals 2, phenolics (by GC/MS base/acid scan) 1, acetal oligomers (by GC/MS base/acid scan) 1 acrylonitrile, 1,3-butadiene, styrene, regulated metals,2,, VOCs, phenolics (by GC/MS base/acid scan) 1 GC/MS 1, VOCs, regulated metals 2, phenolics (by GC/MS base/acid scan) 1, methanol, tert-butyl alcohol 3 caprolactam, nitrogen-containing extractants (by GC/MS base/neutral nnylon 6 scan) 1, VOCs, regulated metals 2, phenolics (by GC/MS base/acid scan) 1 nitrogen-containing extractants (by GC/MS base/neutral scan) 1, oother nylons VOCs, regulated metals 2,, phenolics (by GC/MS base/acid scan) 1, nylon monomers, ppolybutylene (PB) VOCs, regulated metals 2, phenolics (by GC/MS base/acid scan) 1, Bisphenol A, VOCs, regulated metals 2, phenolics (by GC/MS Polycarbonate (PC) base/acid scan) 1, ppolyethylene (PE) VOCs, regulated metals 2, phenolics (by GC/MS base/acid scan) 1, ppolyphenylene oxide (PPO) dimethyl phenol, VOCs, regulated metals 2, phenolics (by GC/MS base/acid scan) 1 ppolyphthalamide (PPA) hexamethylene diamine, terephthalic acid, isophthalic acid, VOCs, regulated metals 2, phenolics (by GC/MS base/acid scan) 1 ppolypropylene (PP) VOCs, regulated metals 2, phenolics (by GC/MS base/acid scan) 1, ppolysulphone including poly[phenylene sulphone] (PPSU) ppolyurethane (PUR) ppolyvinyl chloride (PVC) and chlorinated polyvinyl chloride (CPVC) ppolyvinyl chloride (flexible) sulphone monomer, VOCs, regulated metals 2, phenolics (by GC/MS base/acid scan) 1, GC/MS 1, VOCs, regulated metals 2, phenolics (by GC/MS base/acid scan) 1, regulated metals 2, phenolics 1, VOCs, tin 4, antimony 5, residual vinyl chloride monomer (RVCM) 6, VOCs, regulated metals 2, phenolics (by GC/MS base/acid scan) 1, phthalates 7, RVCM 6, tin 4, zinc 8, Joining and sealing materials cchloroprene eethylene-propylene-diene monomer (EPDM) ETFE (Ethylene GC/MS 1, VOCs, perfluorooctanoic acid tetrafluoroethylene) Flux regulated metals 2, GC/MS 1, VOCs, PNAs 1 ffluoroelastomer GC/MS 1, VOCs, phthalates 7 GC/MS 1, VOCs, and 2-chloro-1,3-butadiene, GC/MS 1, VOCs, phenolics (by GC/MS base/acid scan) 1, phthalates 7, PNAs 1, Nitrosoamines 13

5 GC/MS 1, VOCs, phenolics (by GC/MS base/acid scan) 1, phthalates 7, Isoprene PNAs 1, isoprene monomer GC/MS 1, VOCs, phenolics (by GC/MS base/acid scan) 1, phthalates 7, Neoprene PNAs 1, chloroprene, Nitrosoamines 13 nnitrile-butadiene rubber GC/MS 1, VOCs, phenolics (by GC/MS base/acid scan) 1, phthalates 7, (NBR, BUNA-N) PNAs 1, 1,3-butadiene, acrylonitrile, Nitrosoamines 13 PTFE GC/MS 1, VOCs, perfluorooctanoic acid PVDF GC/MS 1, VOCs, vinylidene fluoride, hexafluoropropene Silicone GC/MS 1, VOCs, 2,4-dichlorobenzoic acid Solder regulated metals 2, aluminum, bismuth, nickel, silver, strontium, zinc GC/MS (base/neutral/acid scan), VOCs, acetone, tetrahydrofuran, Solvent cements cyclohexanone, methyl ethyl ketone, dimethylformamide, methyl isobutyl ketone sstyrene-butadiene rubber GC/MS 1, VOCs, phenolics (by GC/MS base/acid scan) 1, phthalates 7, (SBR) PNAs 1, 1,3-butadiene, styrene, Nitrosoamines 13 Barrier materials regulated metals 2, molybdenum, vanadium, manganese, VOCs, aasphaltic coatings GC/MS base/neutral scan (specific for carbonyls and non-aromatic hydrocarbons) 1, PNAs 1 GC/MS (base/neutral/acid scan), bisphenol A, bisphenol A-diglycidyl eepoxy coatings (liquid and ether 9, bisphenol A-diglycideryl ether 9, bisphenol A-propoxylate 9, powder) epichlorohydrin, VOCs, solvent and reactive diluent additives 10 ppolyester coatings GC/MS (base/neutral/acid scan), VOCs, residual monomers 11 ppolyurethane coatings GC/MS (base/neutral/acid scan), VOCs Portland and hydraulic GC/MS 1, regulated metals 2, dioxins and furans, radionuclides, glycols cements and ethanolamines 12 1 see annex B, section B.7 2 antimony, arsenic, barium, beryllium, cadmium, chromium, copper, lead, mercury, selenium, thallium. 3 tert-butyl alcohol analysis is required for PEX materials except those crosslinked via e-beam methodology. 4 The analysis for tin is required when tin-based stabilizers are used. 5 The analysis for antimony is required when antimony-based stabilizers are used. 6 The level of RVCM within the walls of PVC or CPVC products and materials shall be directly determined (annex B, section B.7). 7 The analysis for phthalates is required when phthalate ester plasticizers are used. Analysis shall be for the specific phthalate ester(s) used in the formulation. 8 The analysis for zinc is required when zinc-based stablilizers are used.

6 9 Analysis shall be performed using liquid chromatography with ultraviolet detection (LC/UV). 10 Analysis shall be performed for the specific solvent and reactive diluent additives used in the individual product formulation, such as benzyl alcohol. 11 Analysis shall be performed for residual concentrations of the specific ester monomers used in the individual product formulation. 12 Glycol and ethanolamine analyses shall be performed on cements containing these compounds as grinding aids. 13 Analysis for N-Nitrosodimethylamine, N-Nitrosomethylethylamine, N-Nitrosodiethylamine, N-Nitrosodi-npropylamine, N-Nitrosopyrrolidine, N-Nitrosomorpholine, N-Nitrosopiperidine, N-Nitrosodi-n-butylamine and N- Nitrosodiphenylamine are erquired when material is sulfur cured. Analysis shall be in accordance with USEPA Method 521 (USEPA-600/R-05/054). 14 Aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, cerium, cobalt, chromium, cesium, copper, dysprosium, erbium, europium, gallium, gadolinium, germanium, hafnium, indium, lanthanum, lead, lithium, lutetium, manganese, mercury, molybdenum, niobium, neodymium, nickel, palladium, praseodymium, platinum, rubidium, rhenium, rhodium, ruthenium, samarium, selenium, silver, strontium, tantalum, tellurium, thallium, tin, titanium, tungsten, uranium, vanadium, tungsten, ytterbium, zinc, zirconium. (products with a footnote of ( 2,14) require expanded battery of footnote 14 if they contain undefined pigments). concluded Supplementary Materials (photographs, diagrams, reports, etc.): If not provided electronically, the submitter will be responsible to have sufficient copies to distribute to committee members. Submitter S. Randall Date 10/26/12