Glass Door Fittings. Dorma glass door fittings. Metalglas glass door fittings. Shower door fittings. Seals for glass doors

Transcription

1 Glass Door Fittings Dorma glass door fittings - glass door patch fittings Beyond pivot system glass preparation details Manet fixed glass fittings Visur pivoting system MAME glass doors Metalglas glass door fittings - application examples Ferando glass door hinges glass door latches and locks Garda patch fittings Modula patch fittings Pivoting system fixed glass fittings House Office frameless glass system PPS Evolution profiles glass door panic fittings glass canopies Shower door fittings - product guide Atlantica shower door hinges Wellness shower door hinges cubicle railing system application examples Rafael shower door fittings Seals for glass doors K-LOCK system for glass doors Cubicle fittings for glass partitions Sales and Technical Support Tel: (all regions) Tel: (London region) Section 1

2 Glass Door Fittings Introduction Please note unless otherwise stated cutouts must be made to the glass prior to it being toughened, please contact us for more information. Specialist Sales Team This section includes sliding door gear and fittings for a wide range of applications, from interior doors to warehouse doors. Because the range of fittings we offer is so comprehensive we have, at Häfele, a Specialist Sales Team to give you expert advice and service. The Team includes Dip GAI certificate holders and Registered Ironmongers who have years of experience supplying the industry. We offer a comprehensive free scheduling service, a free recommendation and quotation service for all our systems, and technical advice. Architectural Ironmongery Sales and Support: Telephone: (all regions) Telephone: (London region) CPD seminars Häfele UK is a member of the RIBA CPD Providers Network and can currently offer the following free of charge seminars on: The what, why and where of sliding door gear Frameless glass fittings for doors, screens and canopies Defining electronic access control For further information please contact us or cpd@hafele.co.uk Order online at as well as: Product information, including regular new product updates Technical advice, information on our glass partner network Häfele office and staff contact details Door Types Depending on the fittings used, doors are classed as either an A, B or C door type, below are examples of each Type A Door - Maximum weight 150 kgs (*120 kgs) Maximum width 1400 mm (*1200 mm) Maximum height 4000 mm (*3500 mm) *For maximum sizes the rail must have a bottom strip in forged steel, for high frequency doors we would recommend the lower measurements Viewed from outside Type B Door - Maximum weight 120 kgs (*1 kgs) Maximum width 1200 mm Maximum height 3500 mm (*3000 mm) *For maximum sizes the rail must have a bottom strip in forged steel, for high frequency doors we would recommend the lower measurements Type C Door - Maximum weight 0 kgs on BTS75V / Free Swing Maximum weight 130 kgs on BTS0 EN4 or higher Floor Spring Maximum width 10 mm Maximum height 3000 mm Viewed from outside Viewed from outside Section 2 Prices Stock Availability Product Information Ordering

3 Glass Door Fittings Introduction Type C Door shown System Overview The DORMA-Glas range of fittings has matured into one of the most comprehensive available today. It offers ideal options for creating all standard toughened glass assemblies in a manner which is technically sound and visually attractive. This gives the designer a wide variety of options for individual expression in creating with toughened glass - either internally or externally. All DORMA fittings are based on a modular system, consisting of a base unit, functional inserts and clip-on covers in the widest possible range of finishes. The glass preparations that are needed can be performed quickly and easily. Quality materials and thorough workmanship guarantee a long service life and a reflection of excellence for years to come. General care instructions The surface finishes of the fittings are not maintenance free and should be cleaned according to their material and design: For metallic surfaces (anodised finishes, stainless steel) please use appropriate cleaning agents without abrasive additives only For varnished surfaces please use appropriate solvent-free cleaning agents only surfaces (without surface protection) have to be treated with an appropriate maintenance agent on occasion, to avoid tarnishing Ordering and Specification: Häfele recommends that you contact the Architectural Ironmongery department to obtain a full specification on these products Häfele Glass Partner Network Häfele UK offer a range of high quality rails, patch fittings, hinges and sliding door gear to suit frameless glass doors. From our experience of dealing with Architects and Specifiers we have noticed a demand for a complete supply and fit solution using our products. Our Glass Partners are an experienced network of glazing professionals, who can offer a high quality supply and fit service across the UK. 360 PROJECT SERVICE Sales and Technical Support Tel: (all regions) Tel: (London region) Section 3

4 Glass Door Fittings Introduction Dorma door rails add stability and safety to heavy or high use doors of all types - single and double leaf, single and double action, non lockable or provided with integral locks. The standard rails require no glass preparation - no holes and no cut-outs Rail cross section Door rails, 0 mm high Door rails, 76.5 mm high Visur - pages Centre hung doors Beyond - pages Door width Pivot point 55/65 mm Manet - pages Section 4 Prices Stock Availability Product Information Ordering

5 Glass Door Fittings Glass Rails Top and bottom rails either 76.5 or 0 mm high for use with -1 mm full height toughened glass doors. Standard euro profile locks and electric locks can be incorporated into these rails. For use with a floor spring or a floor pivot. Special order - contact us for more information Sales and Technical Support Tel: (all regions) Tel: (London region) Section 5

6 Glass Door Fittings Rail Options All these items are Special order - contact us for more information Bottom rail options Bottom rail option Bottom rail with stainless steel insert to suit Dorma floor spring spindle or round pivot Ø14 mm...with electric strike release at side (Standard: fail secure function, 6 to 12V+/-) and floor locking bolt lock, single throw with corrosion resistant bolt and hardened safety roll Top rail options...with floor locking lock Top rail with insert to take Ø15 mm pivot pin...with side locking lock Bottom rail with latch lock at side for electric strike release and floor locking bolt lock, single throw with corrosion resistant bolt and hardened safety roll pin...and top locking lock. Europrofile cylinder, single throw with corrosion resistant bolt and hardened safety roll Top rail with side locking lock, double throw Section 6 Prices Stock Availability Product Information Ordering

7 Glass Door Fittings Rail Options All these items are Special order - contact us for more information Top rail options Fixed panel options Bottom rail with strike-box for side bolt locking, door width up to 1200 mm (> 1200 mm on request) 0 mm...with latch lock at side for electric strike release and top locking bolt lock, single throw with corrosion resistant bolt and hardened safety roll pin Top rail for side panel. up to approx mm long with rail filer insert 7 mm...with electric strike release at side (Standard: fail secure function, 6 to 12V+/-) and top locking bolt lock, single throw with corrosion resistant bolt and hardened safety roll Fixed panel options Bottom rail for side panel. up to approx mm long with rail filer insert 7 mm Bottom rail with electric strike release at side (Standard: fail secure function, 6 to 12V+/-) door width up to 1200 mm (> 1200 mm on request) 0 mm Top rail with electric strike release (Standard: fail secure function, 6 to 12V+/-) 0 mm Top rail with strike-box for side bolt locking Sales and Technical Support Tel: (all regions) Tel: (London region) Section 7

8 Glass Door Fittings Electronic Rails Many all glass applications require electric access control locking systems, magnetic locks and electric strikes can be easily concealed in a door rail. This locking system can then be connected to various types of keyless locking methods, including video or audio entry, card systems and even biometrics. Audio / Video Biometric Shearlock version Section Access Control section For an overview of the different options Hafele s Access Control division has to offer see Section of this catalogue or Solenoid version Electronic Security and Access Control catalogue A collection of some of the latest and most innovative fittings and products the industry has to offer. To request your copy (printed or CD) either phone us with your details or request a catalogue online at Card reader Section Prices Stock Availability Product Information Ordering

9 Glass Fittings Wall Connecting Profile System Application: All around frame system for toughened glass assemblies, with fittings on sides, ceiling and base. A safety type version enables free hanging glass elements by fixing the clamping fitting through glass holes, and also negates the need for securing to the wall and base. For more information on this and for 12.7, 13.5, 15, 17 and 1 mm glass thicknesses, please contact the AI department for more information Base profile A Wall connecting profile Secures to the ceiling, floor and wall For, and 12 mm glass thickness Set consists of: 1 x Aluminium profile x Aluminium clamps For glass thickness mm mm mm (1pc = 3m length) Clamping part Clamps are available for glass thickness up to 1 mm - Please contact the AI department for more information B Clip on cover profile To cover the profile Satin stainless steel (1 pc = 3 m length) C Filler block, x 12 mm For use at the base to prevent glass to metal contact Aluminium (1 pc = 3 m length) D End caps 2 sizes for / or 12 mm glass thickness Satin stainless steel For glass thickness / mm mm Order qty: Multiples of 2 pcs Filler block Sales and Technical Support Tel: (all regions) Tel: (London region) Section

10 Glass Door Patch Fittings NBS Door Types With its broad spectrum of basic types and variants, the Dorma Universal range of patch fittings enables the realisation in toughened glass of almost any conceivable design. Toughened glass assemblies can be provided with fixed parts in widely differing arrangements - with corner fittings at different angles, and with double or single -action doors in singleleaf or double-leaf designs. NBS Door Types This range of fittings has matured into one of the most comprehensive available today. It offers ideal options for creating all standard toughened glass assemblies in a manner which is technically sound and visually attractive. This gives the designer a wide variety of options for individual expression in creating with toughened glass - either internally or externally. All fittings are based on a modular system, consisting of a base unit, functional inserts and clip-on covers in the widest possible range of finishes (contact us for more information). The glass preparations that are needed can be performed quickly and easily. Quality materials and thorough workmanship guarantee a long service life and a reflection of excellence for years to come Section Prices Stock Availability Product Information Ordering

11 Glass Door Patch Fittings NBS Door Types Example of a Type 24 door Example of a Type door 24 Universal Patch Fittings Specification - Type 24 door All fittings produced to ISO 001 Fittings cycle tested to 500,000 operations, DIN standard 1263 Maximum width of doors 10 mm Maximum door weight 0 kg Torque setting for clamping force of patch fittings 15Nm Designed to suit and 12 mm thick toughened glass as standard. However other glass thickness are available, contact us for more information The manifestation of the door may be required in certain applications, please consult your glazier or installer Doors can be offered in either single or double action mode, complete with either glass or ceiling mounted stops Universal Patch Fittings Specification - Type door All fittings produced to ISO 001 Fittings cycle tested to 500,000 operations, DIN standard 1263 Maximum width of doors 10 mm Maximum door weight 0 kg Torque setting for clamping force of patch fittings 15Nm Designed to suit and 12 mm thick toughened glass as standard. However other glass thickness are available, contact us for more information The manifestation of the door may be required in certain applications, please consult your glazier or installer Doors can be offered in either single or double action mode, complete with either glass or ceiling mounted stops 1 x BTS0 Floorspring EN4 - page 1 2 x Eccentric floor socket - page 17 1 x Floor pivot bearing - page 1 2 x PT Bottom pivot patch - page 14 2 x PT20 Top pivot patch - page 14 2 x US Horizontal patch lock - page 16 2 x PT40 Over/side panel pivot patch - page 17 1 x PT70 Overpanel connector - page 15 1 x US20 Centre patch lock - page 16 1 x Euro cylinder - see section 2 1 x GK50 Centre strike patch - page 17 2 x Bar Handles - see section 1 Other finishes are available on special order - contact us for more information Please select door type 1-24 for your project for a full NBS clause to suit each option 2 x PT21 Retractable pivot - page 1 2 x PT21 Cover - page 1 2 x PT Bottom pivot patch - page 14 2 x PT20 Top pivot patch - page 14 2 x Floor pivot bearing - page 1 1 x US20 Centre patch lock - page 16 1 x GK50 Centre strike patch - page 17 1 x Euro cylinder - see section 2 2 x Bar Handles - see section 1 Other finishes are available on special order - contact us for more information Please select door type 1-24 for your project for a full NBS clause to suit each option Sales and Technical Support Tel: (all regions) Tel: (London region) Section 11

12 Glass Door Patch Fittings Fittings for Rail System Accessories for rails include U channel for shuffle glazing as an alternative to the clamping system and door seals A U channel Aluminium 30 x 20 mm version is available to order, please contact the AI department for more information Length 3 m B Aluminium profile with brush seal To prevent draughts and energy loss Profile must be machined into bottom of the rail Aluminium Special order - contact us for more information C Rubber seal To prevent draughts and energy loss Black rubber Length 3 m Rubber profile Section 12 Prices Stock Availability Product Information Ordering

13 Glass Door Patch Fittings Seals for Rail System Hawa Profile, seal and tape for or 12 mm thick glass - can be used with any frameless glass panel: A Protective edge profile For or 12 mm glass thickness For use with brush seal B 6.0 m length Transparent plastic For glass thickness mm mm (6.0 m length) B Brush seal For insertion in edge profile A 3.5 mm brush filaments Length 20 m Order qty: 1 roll (20 m length) C A B C Double-sided adhesive tape To fit between edge of glass panel and protective edge profile Self adhesive Transparent Length 50 m Order qty: 1 roll (50 m length) D Rubber profile For vertical glass edge protection - recommended for glass doors that can strike against one another Self adhesive. For / mm glass thickness Rubber Black Translucent (5.0 m length) 4 Sales and Technical Support Tel: (all regions) Tel: (London region) Section 13

14 Glass Door Patch Fittings Patch Fittings For glass preparation, see pages A PT20 Top patch fitting Unhanded Complete with pivot insert to suit Ø 15 mm pins For and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel /63 with adjustment 51 B PT Bottom patch fitting Unhanded Complete with insert to suit BTS floor springs shown on page 1 and free swing bottom pivot PT 26 For and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel /63 with adjustment C PT22 Top patch fitting Unhanded Complete with insert to suit RTS over panel closer, special order - contact us for more information For and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel D PT30 Over panel pivot patch fitting Unhanded Complete with Ø 15 mm pin to suit PT20 For and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel E PT30 Wall fixing plate To suit PT30 over panel pivot patch fitter Requires item F, must be ordered separately Cast aluminium Satin anodised aluminium F PT30 Threaded rod with wall plug To suit PT30 wall fixing plate, item E must be ordered separately M Ø 15 53/63 with adjustment 2 2 M Section 14 Prices Stock Availability Product Information Ordering

15 Glass Door Patch Fittings Patch Fittings A PT40 Over panel/side panel pivot patch fitting Unhanded Complete with Ø 15 mm pin to suit PT20 top patch fitting shown on page 14 For and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel For glass preparation, see pages Ø 15 55/65 with adjustment 6 B PT41 Over panel/side panel pivot patch fitting with fin attachment Handed Complete with Ø 15 mm pin to suit PT20 top patch fitting shown on page 14 For and 12 mm glass thickness Cast aluminium Left hand Right hand Satin stainless steel Pol. stainless steel /65 with adjustment 21 Ø C PT51 Double over panel patch fitting with fin fitting to suit back to back doors Complete with 2 x Ø 15 mm pins to suit PT20 top patch fitting shown on page 14 To suit and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel Ø Ø D PT60/61 Over panel/side panel connection patch fitting with stop Unhanded For and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel E PT70 Over panel connection patch fitting with double stops Base patch and cover patch included For and 12 mm glass thickness Includes 2 x stops Cast aluminium Satin stainless steel Polished stainless steel F Side connector with fixing plate For and 12 mm glass thickness Fixings must be ordered to suit application Cast aluminium Satin stainless steel Polished stainless steel Sales and Technical Support Tel: (all regions) Tel: (London region) Section 15

16 Glass Door Patch Fittings Patch Locks A US corner patch lock Complete with round bolt and escutcheon For and 12 mm glass thickness 30/30 Euro profile cylinder not included, order separately, shown in Section 2 Cast aluminium Satin stainless steel Polished stainless steel For glass preparation, see pages B US20 centre patch lock Complete with round bolt and escutcheon For and 12 mm glass thickness 30/30 Euro profile cylinder not included, order separately, shown in Section 2 Cast aluminium Satin stainless steel Polished stainless steel C GK20 Double over panel strike patch To suit US corner patch locks To suit and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel D GK30 Single over panel strike patch Unhanded To suit US corner patch lock For and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel E PT30 Over panel panel pivot patch with stop Unhanded To be used as a stop For and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel M M Section 16 Prices Stock Availability Product Information Ordering

17 Glass Door Patch Fittings Patch Fittings For glass preparation, see pages 26-2 A GK40 corner overpanel strike box To suit US corner patch lock, shown on page 16 For and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel B PT40 Over/side panel pivot patch with stop Unhanded For and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel C GK50 Centre strike patch Unhanded To suit US20 centre patch lock, shown on page 16 For and 12 mm glass thickness Cast aluminium Satin stainless steel Polished stainless steel D Floor socket with dust protection Cast aluminium Satin chrome plated E Lock keeper plate Stainless steel Satin stainless steel Ø Ø 25 4 Ø Sales and Technical Support Tel: (all regions) Tel: (London region) Section 17

18 Glass Door Patch Fittings Patch Fittings 3 Ø 15 PT 24 PT 25 PT 21 PT / 65 PT BTS 1 Type B Door shown A PT21 Retractable top pivot With Ø 15 mm pin to suit PT 20 top patch fitting shown on page 14 Zinc die-cast and steel B PT21 cover plate To suit item A Steel Satin stainless steel Polished stainless steel C PT24 Top pivot plate With Ø 15 mm pin Steel 3 mm D PT25 Top pivot pin M screw x Ø 15 mm Plated steel E Floor bearing free swing floor pivot To suit PT bottom patch fittings shown on page 14, and bottom rails 04/602 Maximum load capacity 200 kg Milled aluminium Ø M Ø15 Ø Ø Section 1 Prices Stock Availability Product Information Ordering

19 Glass Door Patch Fittings Floor Springs A BTS 75V Floor spring Specification: Variably adjustable closing force Closing speed depending on the angle (0-15 and 15 - ) are variably adjustable, independent from each other Mechanical backcheck Optionally without hold-open function or with constant hold-open function for door opening angles 0-5 Suitable for DIN right and DIN left doors and for swing doors Standard features: Closing force size 1-4 Maximum door width 10 mm Maximum door weight 120 kg Self coloured cast aluminium For cover plate see item B Function Without hold-open Hold-open Hold-open B Floor spring cover plate To suit item A For swing doors as well as suitable for DIN left or DIN right hand by un-hooking the pre-stamped corner parts Stainless steel or brass Stainless steel Brass C BTS 0, EN 3-6 Floor spring Specification: Variably adjustable closing force and closing speed Mechanical backcheck Optionally with closing force EN 3, EN 4 or EN 6 Suitable for DIN right and DIN left doors and for swing doors Standard features: Closing force size 1-4 Maximum door width EN 3-50 mm Maximum door width EN mm Maximum door width EN 6 - >1200 mm Maximum door weight 300 kg Self coloured cast aluminium For cover plate see item D EN EN EN EN D Floor spring cover plate To suit item C For swing doors as well as suitable for DIN left or DIN right hand by un-hooking the pre-stamped corner parts Stainless-steel or brass Stainless steel Brass Sales and Technical Support Tel: (all regions) Tel: (London region) Section 1

20 Glass Door Patch Fittings Locks and Strikes For glass preparation, see pages A Junior office lock Prepared for levers with unsprung rose 36.5 Lever handles not included - refer to Section 1 For mm glass thickness Euro profile cylinder not included Use 30/30 Euro profile cylinder - see Section 2 Cast aluminium Glass thickness mm Left hand Right hand Satin stainless steel B Junior office lock strike box For double door sets For mm glass thickness Cast aluminium Glass thickness mm Left hand Right hand Satin stainless steel C Junior lock strike plate Cast aluminium Silver aluminium colour Section 20 Prices Stock Availability Product Information Ordering

21 Glass Door Patch Fittings Locks and Strikes - Studio Range For glass preparation, see pages 26-2 A Studio lever latch case Handing is adjusted on site Lever handles not included - refer to Section 1 For or 12 mm glass thickness Cast aluminium Satin stainless steel B Studio locking lever latch case Handing is adjusted on site Lever handles not included - refer to Section 1 Available for or 12 mm glass thickness Euro profile cylinder not included Use off set 30/30 Euro profile cylinder - see Section 2 Cast aluminium Cat. No Satin stainless steel C Studio strike box For or 12 mm glass thickness Cast aluminium Satin stainless steel D Studio strike plate Cast aluminium Silver aluminium coloured Sales and Technical Support Tel: (all regions) Tel: (London region) Section 21

22 Glass Door Patch Fittings Pinch Free Variable pivot point and absolute pinch free on door rails for centre hung doors DORMA TP All the inserts for door rails in the DORMA TP/TA range have been designed and manufactured to give two options in the pivot point distance from the side panel or frame. It can be either 55 mm or 65 mm (distance from pivot point to door edge - 53 mm and 63 mm respectively). In order to change from the standard dimension of 65 mm to 55 mm, the standard insert is unscrewed from the patch, rotated through and refixed position. At 65 mm pivot point and the use of a special round profile doors can be built pinch free (constant air gap of 4 mm). Available to special order subject to minimum order value, please contact the AI department. Completely pinch free double swing doors DORMA Universal pinch freepatch fittings with their 15 mm pivot point help to resolve this problem by means of the closeness of the pivot point to the frame. In order to eliminate finger traps completely, the special radiused edging strip should be used Ø26 Edging strip Available to special order subject to minimum order value, please contact the AI department. Section 22 Prices Stock Availability Product Information Ordering

23 Glass Door Patch Fittings Single Action Patches and Rails /151/152/ A Offset hung doors in rebated frames Range: Maximum door weight 0 kg Maximum door width 00 mm Maximum door width using a bottom door rail 10 mm Dorma ER patch fittings for offset hung doors in rebated frames are supplied as standard prepared for 24 mm rebate depth. They can be prepared to suit rebate depths from mm and from mm. Please specify rebate depth when ordering. Maximum door weight for mm rebate depth: 0 kg Maximum door width for mm rebate depth: 00 mm For doors with maximum weight of 0 kg and maximum width of 00 mm use door rails see pages 6-7 The top centre frame portions are prepared to suit wood and steel frames. For aluminium frames, please enquire, giving details of aluminium system FT (40) 4 (47) (12) Special order - contact us for more information B Offset hung doors in toughened glass assemblies Range: Maximum door weight 0 kg Maximum door width 10 mm Dorma EA patch fittings for offset hung doors in toughened glass assemblies have a 36 mm offset (= 43 mm from pivot point to glass surface) Gap required between leaves on pairs of doors Individual leaf X = gap required width mm mm mm 6 mm over 00 mm 4 mm Special order - contact us for more information X Sales and Technical Support Tel: (all regions) Tel: (London region) Section 23

24 Glass Door Fittings Beyond Pivot System Beyond pivot system Safe, functional and extremely attractive, Beyond, the unique system for glass doors. No risk of pinched fingers with swing doors. The development of Beyond has been shaped by the search for a solution that combines a modern, attractive design with maximum safety and stability. In the swing- door system the pivot point is located directly at the glass edge, thus preventing the risk of trapped fingers often found at the secondary closing edges of glass swing doors. The alternate options of elegant, continuous pivot rod or smart short rod make the system suitable for any room situation Depending on customer requirements, Beyond offers suitable fittings for and 12 mm glass Range: Maximum door weight 0 kg Maximum door width 00 mm Maximum door height 2200 mm If with overpanel: Maximum overpanel width 00 mm Maimum overpanel height 600 mm Basic set for individual door. For installation in masonry. Basic set and over panel fitting wall connector for door with. overpanel. Optionally with side panel on closing side Basic set and overpanel fitting wall connector for door with overpanel and side panel on pivot point side. A Pivoting fitting set, short type For or 12 mm thick glass Set consists of: 1 x Top pivot fitting with pivot Ø15 mm, for use with item E 1 x Bottom pivot fitting with insert, for use with tems F or G, *alternatively can be used with floor bearing free swing floor pivot, see page 1 Aluminium Ø Ø 40 Glass thickness mm 12 mm Satin stainless steel Aluminium EV B Overpanel wall connector For or 12 mm glass thickness With plastic socket For top pivot Glass thickness mm 12 mm Satin stainless steel Aluminium EV C Overpanel glass connector For or 12 mm glass thickness With plastic socket For top pivot Glass thickness mm 12 mm Satin stainless steel Aluminium EV Ø Ø 40 Ø 40 Section 24 Prices Stock Availability Product Information Ordering

25 Glass Door Fittings Beyond Pivot System D Glass connector For and 12 mm glass thickness Black plastic /12 3 Ø 25 E Eccentric socket With adjustable plastic socket insert Zinc coated brass Cat. No Ø Ø 15 F Top pivot bearing For installation in frame or ceiling for Ø15 mm pivot pin Aluminium Ø 24 Ø G Floor pivot bearing With round pivot Ø 14 mm and cover plate Height adjustable by 5 mm Maximum door weight 0 kg Aluminium Satin stainless steel Aluminium EV Glass preparation - IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information R Ø 6 Slotted Ø 6 R Ø Ø Ø Ø 6 Slotted Ø 6 R Sales and Technical Support Tel: (all regions) Tel: (London region) Section 25

26 Glass Door Patch Fittings Glass Preparation Cut-Out Details R55 37 R0 Glass preparation details for PT, PT20, PT22, PT30 IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information R55 R Glass preparation details for PT40 IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information 20 T 42, GK 42 65* B A Angle Distance mm mm 20 R R55 37 Glass preparation details for PT42, GK42 IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information A 6 B Section 26 Prices Stock Availability Product Information Ordering

27 Glass Door Patch Fittings Glass Preparation Cut-Out Details R 1 R A-B Glass preparation details for PT41, GK41 IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information R 1 A-B R0 20 Glass preparation details for PT41, GK41 IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information R A B Sales and Technical Support Tel: (all regions) Tel: (London region) Section 27

28 Glass Door Patch Fittings Glass Preparation Cut-Out Details R 1 A-B A R55 R R0 R55 36 B Glass preparation details for PT51 IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information R R Glass preparation details for US IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information R Glass preparation details for GK20 IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information R0 20 R55 36 Section 2 Prices Stock Availability Product Information Ordering

29 Glass Door Patch Fittings Glass Preparation Cut-Out Details Glass preparation details for GK40 (PT40) IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information Glass preparation details for US20, GK50 IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information Sales and Technical Support Tel: (all regions) Tel: (London region) Section 2

30 Glass Fittings Manet Concept Non Structural Fixed Glass Fittings Manet Concept Single point fixings for Non Structural fixed glass assemblies. Please contact the AI department for further technical information A Glass to wall, single point For and 12 mm glass thickness Offset adjustable Satin stainless steel For mm glass thickness Offset adjustable mm mm mm Ø 32 Ø 35 Ø 32 Ø 35 Ø 32 Ø 35 For 12 mm glass thickness Offset adjustable mm mm mm B Adjustable single-point fixings For 13.5, 15 and 17.5 mm are available on request Special order - contact us for more information C Glass to wall, single point For and 12 mm glass thickness Offset not adjustable Satin stainless steel For mm glass thickness Offset not adjustable 6 mm For 12 mm glass thickness Offset not adjustable 6 mm D Non-adjustable single-point fixings For 13.5, 15 and 17.5 mm are available on request Special order - contact us for more information Ø 32 Ø /15/17.5 Ø 32 Ø 35 6 Ø 32 Ø /15/17.5 Section 30 Prices Stock Availability Product Information Ordering

31 Glass Fittings Manet Concept Non Structural Fixed Glass Fittings E Glass/ceiling connector, 0 For and 12 mm glass thickness Only for use as a supporting function and not carrying Satin stainless steel F Ceiling connector For and 12 mm glass thickness For use as a carrying function Satin stainless steel Ø 36 Ø 32 Rod length Rod length G Glass/glass corner connector 0- For and 12 mm glass thickness With connecting rod Satin stainless steel Connecting rod length 52.5 mm mm mm mm H Glass/wall corner connector 0- For and 12 mm glass thickness With connecting rod Satin stainless steel Connecting rod length 52.5 mm mm mm Sales and Technical Support Tel: (all regions) Tel: (London region) Section 31

32 Glass Door Fittings Visur Pivoting System Visur is a innovative new 'invisible' pivoting system for frameless glass doors Section 32 Prices Stock Availability Product Information Ordering

33 Glass Door Fittings Visur Pivoting System Visur - all glass single / double action doors without any visible fixings A system that secures double-action glass doors without the need for any visually disruptive functional elements. Visur presents the door in perfect transparency. Rather than clutter the clear outline of the door, the hardware components are all located in the surrounding structures. This absence of fittings means that the all glass double action door will match any room style. Special order - contact us for more information IMPORTANT NOTE - Please contact the AI department before preparing glass for the latest information 120 Closer Closer Closer H1 H /12 Floor pivot Floor pivot Floor pivot / Ø Max. height glass (H1) = 2500 mm B1 B 5 Ø126 max. width 10 mm max. height 2500 mm 33 R Design of the top glass tongue and the bottom glass tongue is alike Sales and Technical Support Tel: (all regions) Tel: (London region) Section 33

34 Glass Door Fittings MAME doors The new DORMA glass door family offers sophisticated European design for interior commercial and residential applications. The MAME family includes door frames, hardware and fitting and specialised glass allowing users to create a breathtaking door that blends seamlessly with contemporary building aesthetics. The unique MAME system comes complete and readyto-install. The system comes with all door hardware attached. Available glass design elements include colour, sandblasting, LED lighting, and engraving. Other unique materials such as steel cables, wood or even leather can be incorporated into the glass. Some designs offer interchangeable design elements that can be switched out with the décor. Others offer textured glass, or artistically broken glass between two other panes.thanks to its exclusive design, the slim MAME aluminium door frame is unusually strong and stable. In addition to swing doors, the MAME family includes glass sliding door systems. MAME glass sliding doors are fitted with high quality stainless steel and aluminium technical parts, which allow smooth and silent operation. MAME doors, opening up new perspectives Please contact AI for Ordering Details Telio Markanta 17 Section 34 Prices Stock Availability Product Information Ordering

35 Glass Door Fittings MAME doors Futura 0 Sensita 0 Telio Sales and Technical Support Tel: (all regions) Tel: (London region) Section 35

36 Glass Doors Fittings Metalglas Application Examples Metalglas In Northern Italy the art of metalworking has been handed down for centuries from generation to generation. These skills are combined with universally admired Italian design to create a stunning range of products. Häfele UK are proud to be the exclusive distributors for Metalglas. Specialist Sales Team Because the range of fittings we offer is so comprehensive we have, at Häfele, a Specialist Sales Team to give you expert advice and service. The Team includes Dip GAI certificate holders and Registered Ironmongers who have years of experience supplying the industry. We offer a comprehensive free scheduling service, a free recommendation and quotation service for all our systems, and technical advice. Architectural Ironmongery Sales and Support: Telephone: (all regions) Telephone: (London region) CPD seminars Häfele UK is a member of the RIBA CPD Providers Network and can currently offer the following free of charge seminars on: The what, why and where of sliding door gear Frameless glass fittings for doors, screens and canopies Defining electronic access control For further information please contact us or cpd@hafele.co.uk Metalglas - House Office Metalglas - PPS Evolution Section 36 Prices Stock Availability Product Information Ordering

37 Glass Doors Fittings Metalglas Application Examples Metalglas - Open Sky glass canopy Metalglas - Modulo system Metalglas - Glass door panic fittings Metalglas - Pivoting system Sales and Technical Support Tel: (all regions) Tel: (London region) Section 37

38 Glass Door Fittings Modulo Quadro Modulo Quadro is a new square designer patch system for glass doors, the original Modulo system is shown from page 52 Please contact the Architectural Ironmongery department for more details Section 3 Prices Stock Availability Product Information Ordering

39 Glass Door Fittings Fernando Glass Door Hinges Glass doors allow light to flood into a room giving the impression of greater space. By using Fernando glass door hinges you can fit frameless doors in existing doorways. Universal glass door hinges are available for any rebate depth. For suitable locks and latches please see pages For information on glass preparation, please contact the Architectural Ironmongery department A Fernando slim glass door hinge For left or right hand use Ideal for retro fit For -12 mm toughened glass Max. door weight 60 kg (per pair) Steel Satin nickel plated Satin chrome plated (2 pcs required per door) B Fernando slim glass to glass hinge For left or right hand use For -12 mm toughened glass Max. door weight 60 kg (per pair) Steel FInish Satin nickel plated Satin chrome plated (2 pcs required per door) Ø Sales and Technical Support Tel: (all regions) Tel: (London region) Section 3

40 Glass Door Fittings Fernando Glass Door Hinges For suitable locks and latches please see pages For information on glass preparation, please contact the Architectural Ironmongery department A Fernando automatic glass door hinge For -12 mm toughened glass Self closing from any position For double action doors only Max. door weight 60 kg (per pair) Satin chrome plated Satin nickel plated (2 pcs required per door) 2 B Fernando automatic glass/glass door hinge For left or right hand use For -12 mm glass thickness Max. door weight 50 kg (per pair) Steel Satin chrome plated Satin nickel plated (2 pcs required per door) C Fernando automatic glass door hinge Heavy duty automatic glass door hinge For -12 mm glass thickness Max. door weight 75 kg (per pair) Zero position can be set Satin chrome plated Satin nickel plated (2pcs required per door) Section 40 Prices Stock Availability Product Information Ordering

41 Glass Door Fittings Minima Locks and Latches For information on glass preparation, please contact the Architectural Ironmongery department Satin chrome shown A Minima latch For mm toughened glass Fixing materials included Handles to be ordered separately - select from StarTec range, see Section 1 Cat.no. Satin chrome plated Satin nickel plated R ± Satin nickel shown B Minima latch with privacy For mm toughened glass Fixing materials included Handles to be ordered separately - select from StarTec range, see Section 1 Cat.no. Satin chrome plated Satin nickel plated R ± Satin nickel shown C Minima deadlock double bevelled latch For mm toughened glass Fixing materials included Cylinder to be ordered separately, see page 45 Cat.no. Satin chrome plated Satin nickel plated D Minima strike box For mm toughened glass Fixing materials included For use with items A, B and C shown above Cat.no. Satin chrome plated Satin nickel plated ± R ± R13.5 Satin chrome shown Sales and Technical Support Tel: (all regions) Tel: (London region) Section 41

42 Glass Door Fittings Ferrari Locks and Latches For information on glass preparation, please contact the Architectural Ironmongery department 200 Satin chrome shown A Ferrari latch For -12 mm toughened glass Handles to be ordered separately - select from StarTec range, see Section 1 Satin chrome plated Satin nickel plated Ø Ø Satin nickel shown B Ferrari latch with privacy snib For -12 mm toughened glass Handles to be ordered separately - select from StarTec range, see Section 1 Satin chrome plated Satin nickel plated Ø Ø C Ferrari latch euro profile For -12 mm toughened glass Handles to be ordered separately - select from StarTec range, see Section 1 Cylinder to ordered separately, see page 45 Satin chrome plated Satin nickel plated D Ferrari strike box For -12 mm toughened glass For use with items A, B and C shown above Satin chrome plated Satin nickel plated Ø Ø 47 Ø Ø Satin chrome shown Satin nickel shown Section 42 Prices Stock Availability Product Information Ordering

43 Glass Fittings Reina and Compact Locks For information on glass preparation, please contact the Architectural Ironmongery department Ø A Reina V-750 WC vertical lock Vertical lock reversible with W.C. latch For -12 mm toughened glass Fixing included Flat strike included Handles to be ordered separately - select from StarTec range, see Section 1 Satin chrome plated Satin nickel plated Ø B Reina V-750 PZ Vertical lock with cylinder hole Vertical lock with cylinder hole For -12 mm toughened glass Fixing materials included Flat strike included Handles to be ordered separately - select from StarTec range, see Section 1 Cylinder to be ordered separately, see page 45 Handed Left Right Satin chrome plated Satin nickel plated C Compact lock square For - mm toughened glass Fixing materials included Handles to be ordered separately - select from StarTec range, see Section 1 Cat. No Satin chrome plated Satin nickel plated D Compact lock round For - mm toughened glass Fixing materials included Handles to be ordered separately - select from StarTec range, see Section 1 Cat. No Satin chrome plated Satin nickel plated Ø 12 Ø Sales and Technical Support Tel: (all regions) Tel: (London region) Section 43

44 Glass Door Fittings Minima Locks and Latches For information on glass preparation, please contact the Architectural Ironmongery department A Minima sliding door lock To suit all sliding doors Cylinder and turn included For - mm toughened glass Fixing materials included Ø Satin chrome plated Satin nickel plated For flush pull handles, please see items A and B in Section 4 page B Minima strike box To suit all sliding door locks For - mm toughened glass Satin chrome plated Satin nickel plated ± R C MInima deadlock To suit all sliding door locks For - mm toughened glass For cylinders see pages 45 and 46 For strike plates see page 46 Satin chrome plated Satin nickel plated D Minima deadlock strike box To suit all sliding door locks For mm toughened glass Satin chrome plated Satin nickel plated Ø Ø ± R ± R Section 44 Prices Stock Availability Product Information Ordering

45 Glass Door Fittings Locking Systems - Cylinders A Cylinder with key both sides Cylinder length 4 mm Three keys included 4 Ø17 33 Satin chrome plated Satin nickel plated B Cylinder and turn Cylinder length 4 or 62 mm Three keys included A/B Sat. chrome plated Sat. nickel plated 21/27 mm /31 mm A 4/62 B Ø 30 Ø C Cylinder with key both sides, symmetrical Cylinder length 44 mm Three keys included 44 Ø17 33 Satin chrome plated Satin nickel plated D WC cylinder knob for lock side Ø 30 mm knob Cylinder length 43 mm Satin chrome plated Satin nickel plated E WC cylinder knob for rebated side Ø 30 mm Cylinder length 43 mm Satin chrome plated Satin nickel plated Ø 30 Ø 17 Ø 30 Ø Sales and Technical Support Tel: (all regions) Tel: (London region) Section 45

46 Glass Door Fittings Locking Systems - Cylinders and Strike Plates A Cylinder with turn both sides Ø 30 mm knobs Cylinder length 43 mm Fixing materials included Satin chrome plated Satin nickel plated Ø 30 Ø B WC cylinder with two knobs Ø 30 mm knobs Cylinder length 43 mm Fixing materials included Satin chrome plated Satin nickel plated Ø 30 Ø C Flat strike plate, for non rebated frames Chrome plated D Flate strike plate, for rebated doors Chrome plated E Flat strike plate for hook lock Satin chrome plated Satin nickel plated F Flat strike plate for Minima deadlock Satin chrome plated Satin nickel plated Section 46 Prices Stock Availability Product Information Ordering

47 Glass Door Patch Fittings Garda Patch Fittings Garda patch fittings Application: Metalglas Garda patches can be used for a single glass door in a frame or an all glass wall. Ideal for residential and commercial applications particularly where there are a large number of doors on a contract due to the reasonable cost of the patches. For type C doors Range: For toughened glass -12 mm Max. system weight 70 kg Max. panel width 00 mm Max. panel height 2400 mm Top/bottom patch Overpanel and side panel with top patch Corner overpanel strike box Centre lock with strike box Sales and Technical Support Tel: (all regions) Tel: (London region) Section 47