4110T 4040XPT 4210T* 4050T * INDICATES HIGH SECURITY CLOSER. REFER TO THAT SECTION OF THE CATALOG.
|
|
- Maud Shelton
- 7 years ago
- Views:
Transcription
1 Product selectio guide Surface mouted 4000 LCN closers feature a moder desig egieered for each applicatio, easy istallatio, ad superior performace. This guide is based o the desired moutig of the closer surface mouted closers EXTERIOR DOOR PUSH SIDE MOUNTED PULL SIDE MOUNTED double Lever Arm XP * 4050 double Lever Arm XP 4510* 4050 INTERIOR DOOR PUSH SIDE MOUNTED PULL SIDE MOUNTED double Lever Arm SINGLE Lever Arm double Lever Arm SINGLE Lever Arm XP * T 4040XPT 4210T* 4050T XP 4510* T 4010T 4020T 4510T* 4040XPT 4030T 4050T * INDICATES HIGH SECURITY CLOSER. REFER TO THAT SECTION OF THE CATALOG. Product compariso This chart shows a basic compariso of 4000 closers. Refer to the specific closer chapter for complete details T T 4000T MOUNTING FINISH COVER CYLINDER HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) PARALLEL ARM STOP FACE PLASTIC METAL NON-HANDED NON-SIZED ACCESSIBILITY DELAYED ACTION*** AVB** REGULAR (DOUBLE) STANDARD (SINGLE) *ARM FUNCTION CLOSER SERIES T T T XP XPT POWDER COAT PLATED 90 HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. See idividual closer series for degrees of opeig per istallatio. ** Advaced Variable Backcheck. *** Delay Actio for 4040XP icorporates stadard 4041 cylider. LCN Door Cotrol Catalog 1
2 4000 mouted closers APPLICATIONS For alumium, hollow metal, or wood swigig doors ad frames. Ca be used with hige or pivot mouted door. Adapter plates ad other istallatio accessories available for uusual coditios. FEATURES COMMON TO 4000 SERIES Each closer (except 4050, 4050T, 4040XP, 4040XPT, 4030, 4030T) is desiged for a specific moutig; hige side, top jamb, or parallel arm. 4040XP closer with regular or hold-ope arm mouts hige side or top jamb. 4030, 4040XP ad 4050 regular parallel arm closers iclude 62PA SHOE required to parallel arm mout either regular or hold-ope arm. Haded for right or left swigig doors, except for 4000T, 4030, 4030T, 4040XP, 4050, 4050T ad 4040XPT. Closers to meet ADA reduced opeig force requiremets except 4000T. Adjustable hydraulic backcheck cushios opeig swig prior to 90. Separate regulatio of geeral closig speed ad latchig speed. Joits i regular arm ad shoe adapt to ueve trim. Reversible shoe to boost latchig power o double lever arms. Available i a wide rage of stadard or optioal custom powder coat fiishes to bled with door ad frame. Plated fiishes available to accet door ad frame. Not desiged for exterior moutig or exposed to elemets. DESIGN ASSISTANCE LCN has bee providig reliable solutios to uique door cotrol problems sice Desig ad specificatio assistace are oly a phoe call away. Cotact LCN for assistace or techical iformatio at or FAX (Order Etry), Fax for Product Support. WARRANTY 30 year limited warraty; 25 year limited warraty (4050). See Geeral Iformatio Sectio for complete warraty details. SPECIFICATIONS Refer to SPECIFICATIONS sectio for suggested architectural specificatios. MATERIALS High stregth cast iro or cast alumium (4050) cylider. Forged steel mai arms. Oe piece forged steel pisto. Double heat treated piio. LCN s all weather Liquid X fluid performs to temperature rages from 120 F (49 C) to -30 F (-35 C) without ay seasoal adjustmet. LCN's stadard all weather fluid performs to temperature rages from 120 F (49 C) to -30 F (-35 C).. High efficiecy, full complemet, low frictio bearigs. Tamper resistat regulatig screws. Full rack ad piio hydraulic actio. Quiet, low frictio track ad roller combiatio for all sigle lever arm (track style) closers. FINISHES Available i six stadard or optioal custom powder coat fiishes to bled with door ad frame. LCN s powder coat fiishes surpass 100 hours of salt spray which is over four times the ANSI stadard for corrosio resistace. For istallatios where a higher level of corrosive resistace is required, LCN offers a optioal special rust ihibitig (SRI) pretreatmet. Closers that combie the exclusive LCN powder coat fiish ad the SRI pre-treatmet exceed the ANSI stadard for corrosio resistace eve further. Plated fiishes are available as a optio to accet door ad frame. (SRI ot available with plated fiishes). LISTINGS & APPROVALS UL listed for self-closig doors without hold-ope uder SWINGING DOOR CLOSERS (GVEV) file R1943. Tested ad certified uder ANSI Stadard A156.4 Grade Oe. Cosult factory for details. Cosult factory for other listigs such as; cul, Califoria State Fire Marshal, Bureau of Stadards ad Appeals. POSITIVE PRESSURE LCN closers have bee certified for three hours by UL to be i compliace with UL 10C. Cotact LCN for specific details o door closer fire ratigs. FASTENERS 4010, 4010T, 4020, 4020T, 4040XP, 4040XPT, 4050, 4050T, 4110, 4110T closers are shipped with: A stadard SELF-REAMING ad TAPPING SCREW (SRT) pack that cotais Philips head SRT screws to istall the closer. 4000T series closers are shipped with: A stadard WOOD ad MACHINE SCREW (WMS) pack that cotais Philips head wood ad machie screws to istall the closer. 4030, 4030T series closers are shipped with: A stadard WOOD ad SELF-TAPPING MACHINE SCREW (WMS) pack that cotais Phillips head wood ad self-tappig machie screws to istall the closer.stadard LCN thru bolts (TB) ca be istalled o 1-3/4 (44 mm) thick doors with 1/4-20 machie screws. Optioal thru bolt (TB) sizes are available for 1-5/8 (41 mm) or 1-3/8 (35 mm) door thickess, but this must be specified whe orderig. Drill 25/64 for steel doors or Drill 3/8 for wood doors Notes: 1. For Thru Bolts, specify door thickess if other tha 1-3/4 (44mm), represeted i diagram as dimesio "X". 2. Phillips head, metric machie screws are available, please specify. 3. LCN recommeds the use of wood screws, available i optioal WMS screw packs, for wood door applicatios. MAINTENANCE Closers mouted accordig to LCN istallatio istructios require o periodic maiteace or adjustmets. 2 LCN Door Cotrol Catalog
3 4010 Features The 4010 is LCN s best performig heavy duty closer desiged specifically for istitutioal ad other rugged high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/2 Diameter Pisto 11/16 Diameter Double Heat Treated Piio Joural All Weather Fluid Haded Templatig Peel--Stick templates - 2-1/2 x 6 Moutig Hole Patter Size Adjustable 1-5 or Sized 6 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Hige (Pull Side) Regular Arm Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING FINISH COVER CYLINDER *ARM FUNCTION PARALLEL ARM STOP FACE POWDER COAT PLATED PLASTIC METAL NON-HANDED NON-SIZED ACCESSIBILITY DELAYED ACTION AVB** REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. ** Advaced Variable Backcheck. LCN Door Cotrol Catalog 3
4 4010 Moutig details Hige (Pull) Side Moutig B 2-11/16" 68 mm 3/4" 19 mm 1" 25 mm A 11-1/2" 292 mm 2-1/4" 57 mm 3-1/2" 89 mm 12-1/4" 311 mm 3-5/8" 92 mm C Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 140 Reveal Should ot exceed 3/4 (19 mm). Should ot exceed 1/8 (3 mm) for Fusible lik arm Top Rail Less tha 3-3/4 (95 mm) requires PLATE, Plate requires 2 (51 mm) miimum Clearace of 2-1/4 (57 mm) behid door required for 90 istallatio Delayed Actio Maximum Opeig Arm Clearace Add suffix DEL to selected cylider Not available with 4016 cylider Delays closig from maximum opeig to approximately 70. Delay time adjustable up to approximately 1 miute Ca be templated for: 100 : A = 5-15/16 (151 mm) B = 11-15/16 (303 mm) Hold-ope poits up to maximum opeig with hold-ope arm Regular arm: C = 1-1/16 (27 mm) Hold-ope arm: C = 1-3/8 (35 mm) Fusible lik arm requires: C = 1-5/8 (41 mm) Note: Hold-ope poits up to maximum opeig with hold-ope arm 140 : A = 4-3/16 (106 mm) B = 10-3/16 (259 mm) 4 LCN Door Cotrol Catalog
5 4010 Accessories Cyliders Covers Istallatio Accessories Right Had Show 4011(6)-3071 Cast Iro Cylider Assembly Haded Stadard Plastic Cover No-haded Stadard MC Metal Cover Haded Required for plated fiishes ad custom powder coat fiishes Plate Required where top rail is less tha 3-3/4 (95 mm) Requires miimum 2 (51 mm) top rail Optioal Arms Regular Arm Hold-Ope Arm FL Fusible Lik Arm No-haded Provides hold-ope fuctio, adjustable at elbow Optioal Haded Releases hold-ope fuctio whe exposed to temperatures above 165 F. 1/8 (3 mm) maximum reveal Optioal NOTE: Check local codes before specifyig FL arms. NOT A life safety product! LCN Door Cotrol Catalog 5
6 4010 Orderig Iformatio How-to-order 4010 closers 1. Select cylider size 4011 (adjustable from size 1 to 5) 4016 (DEL ot available) 2. Specify had RH LH 3. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer will be shipped with: - Stadard cylider - Stadard cover - Regular arm - Self-reamig ad tappig screws uless optios listed below are selected. Closer optios Cylider Delayed Actio (DEL) Cover Metal (MC) Arm Hold-Ope (H) Fusible Lik, 165 F (FL) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Screw Pack TB* & SRT Screw (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4. Istallatio Accessories Plate, Special Template ST- Table of sizes Select closer based o width of door The sprig power of o-sized 4011 cylider is adjustable from size 1 through size 5 ad is shipped set to size 3 Sized 4010 cyliders available i size 6 Delayed actio ot available with 4016 cylider Exterior (ad Vestibule) door width Iterior door width mm mm mm mm mm mm mm mm mm mm mm *4011 *4011 size 2 size 3 size 4 size 5 size miimum door width Miimum door width Idicates recommeded rage of door width for closer size. * Adjustable Size 1 thru 5. Reduced opeig force 4010 closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to POWER OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH * lbs * lbs * Maximum opeig force. 6 LCN Door Cotrol Catalog
7 4010T Features The 4010T is LCN s best performig heavy duty track closer desiged specifically for iterior doors i istitutioal ad other rugged high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/2 Diameter Pisto 11/16 Diameter Double Heat Treated Piio Joural All Weather Fluid Haded Templatig Peel--Stick templates - 2-1/2 x 6 Moutig Hole Patter Size Sized 1, 3 or 4 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Hige (Pull Side) Stadard Arm ad Track with Roller Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. AVAILABLE NOT AVAILABLE HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING FINISH COVER CYLINDER *ARM FUNCTION PARALLEL ARM STOP FACE POWDER COAT PLATED PLASTIC METAL NON-HANDED Closer available with less tha 5.0 lbs. Opeig 36 * Maximum opeig/hold-ope poit with stadard template. NON-SIZED ACCESSIBILITY DELAYED ACTION AVB REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS 100 LCN Door Cotrol Catalog 7
8 4010T Moutig details Hige (Pull) Side Moutig 2" 51 mm 1-7/16" 37 mm 22-3/4" 578 mm 2-1/4" 57 mm 1-1/4" 32 mm 3-11/16" 94 mm 1-1/16" 27 mm 3-15/16" 100 mm 12-1/4" 311 mm 3-1/2" 89 mm 4010T-18 Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 180 Note: Optioal track bumper assembly assists backcheck i cushioig the opeig swig of the door. It is ot iteded to replace a auxiliary stop Reveal Should ot exceed 1/8 (3 mm) for stadard arm Should ot exceed 3-5/16 (84 mm) for double egress arm Top Rail Less tha 3-3/4 (95 mm) requires PLATE, 4010T-18 Note: Plate requires 2 (51 mm) miimum Head Frame Clearace Maximum Opeig Requires 1-1/2 (38 mm) miimum 2-1/4 (57 mm) behid door required for 90 or 180 istallatio Templatig allows 180 with stadard arm, limited to 120 whe optioal bumper is istalled Cosult factory if door will be held ope at 180 Variable hold-ope agles with ifiite optios Notes: May track style door closers are capable of allowig 180 of door swig The majority of track style closers are at their weakest closig force i the rage Cosult factory for applicatios where door must swig LCN Door Cotrol Catalog
9 4010T Accessories Cyliders Covers Right Had Show 4011T(3)(4)-3071 Cast Iro Cylider Assembly 4010T-72 Plastic Cover 4010T-72MC Metal Cover Haded No-haded Haded Stadard Stadard Required for plated fiishes ad custom powder coat fiishes Optioal Arms 4010T-3077T Stadard Arm 4010T-3077DE Double Egress Arm Haded Haded Does ot iclude track roller For double egress doors ad frames Does ot iclude track roller Maximum reveal is 3 5/16 (84mm) Optioal Tracks 4010T-3038 Stadard Track 4010T-3038B Stadard Track with Bumper 4010T-3038H Hold-Ope Track 4010T-3038HB Hold-Ope Track with Bumper No-haded No-haded No-haded No-haded No hold-ope Will accept hold-ope clip ad/or bumper assembly Stadard No hold-ope With bumper assembly istalled Will accept hold-ope clip Optioal With hold-ope clip istalled Will accept bumper assembly Optioal With hold-ope clip ad bumper assembly istalled Optioal LCN Door Cotrol Catalog 9
10 4010T Accessories Istallatio Accessories 4010T-18 Plate 4010T-169 Track Bumper 4010T-3054 Hold-Ope Clip 4010T-3034 Track Roller Required where top rail is less tha 3-3/4 (95 mm) Requires miimum 2 (51 mm) top rail Mouts i track to assist backcheck, does ot replace auxiliary stop Limits maximum opeig Mouts i track to provide hold-ope fuctio) Hold-ope poit cotrolled by clip locatio Quiet, low frictio roller assembly Shoulder dimesio X = 1/16 (2mm) Cosists of bumper, bumper post, ad moutig screw Cosists of clip ad moutig screws Requires 4010T-3034H Track Roller 4010T-3034H Track Roller Quiet, low frictio roller assembly Shoulder dimesio X = 1/16 (2mm) Sprig-loaded hold-ope mechaism 10 LCN Door Cotrol Catalog
11 4010T How-to-order 4010T closers 1. Select cylider size 4011T (ADA) 4013T 4014T 2. Specify had RH LH 3. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer will be shipped with: - Stadard cylider - Stadard cover - Stadard arm - Track roller - Stadard track - Self-reamig ad tappig screws uless optios listed below are selected. Orderig Iformatio Closer optios Cover Metal (MC) Arm Double Egress (DE)** Track Regular with Bumper (BUMPER) Hold-Ope (HO) Hold-Ope with Bumper (HBUMPER) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly ** Note: Usig this closer o double-egress doors ad frames requires the closer to be ordered with a DE suffix (i.e., 4014T DE). Stadard DE optio will accommodate pull side reveals up to 3-5/16. For deeper reveals, cosult factory. Screw Pack TB* & SRT Screw (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4 Istallatio Accessories Plate, 4010T-18 Special Template ST- Table of sizes Select closer based o width of door Sized 4010T cyliders available i size 1, 3 or 4 Closig power of all 4010T closers may be icreased 15% Iterior door width mm mm mm mm 4011T * 4013T 4014T size 1 size 3 size 4 Miimum door width. To meet ADA, refer to chart below. Idicates recommeded rage of door width for closer size. ** Note: Usig this closer o double-egress doors ad frames requires the closer to be ordered with a DE suffix (i.e., 4014T DE). Stadard DE optio will accommodate pull side reveals up to 3-5/16. For deeper reveals, cosult factory. Reduced opeig force 4010T closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to AUTOMATIC OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH * lbs. N/A N/A N/A 5.0* lbs. 4011T 4011T 4011T * Maximum opeig force. LCN Door Cotrol Catalog 11
12 Notes 12 LCN Door Cotrol Catalog
13 4020 Features The 4020 is LCN s best performig heavy duty closer desiged specifically for istitutioal ad other rugged high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/2 Diameter Pisto 11/16 Diameter Double Heat Treated Piio Joural All Weather Fluid Haded Templatig Peel--Stick templates x 6 Moutig Hole Patter Size Adjustable 1-5 or Sized 6 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Top Jamb (Push Side) Regular arm Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. AVAILABLE NOT AVAILABLE HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING FINISH COVER CYLINDER *ARM FUNCTION PARALLEL ARM STOP FACE POWDER COAT PLATED PLASTIC METAL NON-HANDED Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. ** Advaced Variable Backcheck. NON-SIZED ACCESSIBILITY DELAYED ACTION AVB** REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS LCN Door Cotrol Catalog 13
14 4020 Moutig details Top Jamb (Push) Side Moutig 3-5/8" 92 mm 3-1/2" 89 mm A 11-1/2" 292 mm 2-1/4" 57 mm B 2-11/16" 68 mm 3/4" 19 mm 1" 25 mm 12-1/4" 311 mm G Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where the door caot swig 180 Reveal Head Frame Top Rail 2-9/16 (65 mm) allows 180 opeig with regular arm 4-13/16 (122 mm) allows up to 140 opeig with regular arm 8 (203 mm) allows up to 140 opeig with LONG ARM where stadard rod ad shoe is replaced with optioal log rod ad shoe ( LR) Less tha 3-7/16 (87 mm) requires PLATE, Use PLATE, G for flush ceilig coditio. Either plate requires 1-3/4 (44 mm) frame miimum. Requires miimum 1-1/2 (38 mm) Closer o plate requires 2 (51 mm) miimum Closer o G plate requires 2-3/4 (70 mm) miimum Delayed Actio Maximum Opeig Add suffix DEL to selected cylider. Not available with 4026 cylider Delays closig from maximum opeig to approximately 75 Delay time adjustable up to approximately 1 miute Ca be templated for: 100 : A = 6 (152 mm) B = 12 3/8 (314 mm) Notes: Hold-ope poits up to maximum opeig or 140, whichever is less, for hold-ope or fusible lik arm For hold-ope beyod 140, use 4110 closer 140 : A = 4 (102 mm) B = 10 3/8 (264 mm) 180 : A = 2 (51 mm) B = 8 3/8 (213 mm) 14 LCN Door Cotrol Catalog
15 4020 Accessories Cyliders Covers 4021(6)-3071 Cast Iro Cylider Assembly Left Had Show Plastic Cover Right Had Show MC Metal Cover Haded Haded Haded Stadard Stadard Required for plated fiishes ad custom powder coat fiishes Optioal Arms Regular Arm L Log Arm Hold-Ope FL Fusible Lik No-haded No-haded Haded Haded Icludes LR for deep reveals.(see page 14 for allowable reveals) Optioal Provides hold-ope fuctio, adjustable at elbow 5-3/4 (146 mm) maximum reveal, 140 hold ope Releases hold-ope fuctio, adjustable at shoe, whe exposed to temperatures above 165 F 3-7/8 (98 mm) maximum reveal Optioal Optioal NOTE: Check local codes before specifig FL arms. NOT A life safety product! Istallatio Accessories Plate G Plate Required where head frame is less tha 3-7/16 (87 mm) Requires miimum 1-3/4 (44 mm) miimum head frame ad 2 (51 mm) top rail For flush ceilig coditio Rrequires miimum 1-3/4 (44 mm) miimum head frame ad 2-3/4 (70 mm) top rail 3-7/8 (98 mm) maximum reveal LCN Door Cotrol Catalog 15
16 4020 Orderig Iformatio How-to-order 4020 closers 1. Select cylider size 4021 (adjustable from size 1 to 5) 4026 (DEL ot available) 2. Specify had RH LH 3. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer will be shipped with: - Stadard cylider - Stadard cover - Regular arm - Self-reamig ad tappig screws uless optios listed below are selected. Closer optios Cylider Delayed Actio (DEL) Cover Metal (MC) Arm Hold-Ope (H) Fusible Lik, 165 F (FL) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Table of sizes Screw Pack TB* & SRT Screw (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4 Istallatio Accessories Plate, Plate, G Special Template ST- Select closer based o width of door The sprig power of o-sized 4021 cylider is adjustable from size 1 through size 5 ad is shipped set to size 3 Sized 4020 cyliders available i size 6 Delayed actio ot available with 4026 cylider Exterior (ad Vestibule) door width Iterior door width mm mm mm mm mm mm mm mm mm mm mm *4021 size 3 size 4 size 5 size 6 *4021 size 2 size 3 size 4 size 5 size Miimum door width Miimum door width Idicates recommeded rage of door width for closer size. * Adjustable Size 1 thru 5. Reduced opeig force 4020 closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to AUTOMATIC OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH * lbs * lbs * Maximum opeig force. 16 LCN Door Cotrol Catalog
17 4020T Features The 4020T is LCN s best performig heavy duty track closer desiged specifically for iterior doors i istitutioal ad other high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/2 Diameter Pisto 11/16 Diameter Double Heat Treated Piio Joural All Weather Fluid Haded Templatig Peel--Stick templates - 2-1/2 x 6 Moutig Hole Patter Size Sized 1, 3 or 4 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Top Jamb (Pull Side) Stadard arm, track with roller Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. AVAILABLE NOT AVAILABLE HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING FINISH COVER CYLINDER *ARM FUNCTION PARALLEL ARM STOP FACE POWDER COAT PLATED PLASTIC METAL NON-HANDED NON-SIZED ACCESSIBILITY Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. ** Advaced Variable Backcheck. DELAYED ACTION AVB** REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS LCN Door Cotrol Catalog 17
18 4020T Moutig details Top Jamb (Pull Side) Moutig 5-5/16" 151 mm 12-1/4" 311 mm 3-1/2" 89 mm 2-1/4" 57 mm 1-1/4" 32 mm 4-1/16" 103 mm 1-1/16" 27 mm 4020T /8" 41 mm 22-3/4" 578 mm Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 180 Note: Optioal track bumper assembly assists backcheck i cushioig the opeig swig of the door. It is ot iteded to replace a auxiliary stop Reveal Should ot exceed 1/8 (3 mm) Head Frame Less tha 3-7/8 (98 mm), requires PLATE, 4020T-18 Plate requires 1-3/4 (44 mm) miimum Clearace Maximum Opeig 1-1/2 (38 mm) behid door required for 90 or 180 istallatio Templatig allows 180 with stadard track arm, limited to 100 with optioal bumper istalled Cosult factory if door will be held ope at 180 Variable hold-ope agles with ifiite optios Notes: May track style door closers are capable of allowig 180 of door swig The majority of track style closers are at their weakest closig force i the rage Cosult factory for applicatios where door must swig LCN Door Cotrol Catalog
19 4020T Accessories Cyliders Covers Right Had Show Left Had Show 4021T(3)(4)-3071 Cast Iro Cylider Assembly 4020T-72 Plastic Cover 4020T-72MC Metal Cover Haded Haded Haded Stadard Stadard Required for plated fiishes ad custom powder coat fiishes Optioal Arms 4020T-3077T Stadard Arm Haded Roller ot icluded with arm Tracks 4020T-3038 Stadard Track 4020T-3038B Stadard Track with Bumper 4020T-3038H Hold-Ope Track 4020T-3038HB Hold-Ope Track with Bumper No-haded No-haded No-haded No-haded No hold-ope Will accept hold-ope clip ad/or bumper assembly Stadard No hold-ope With bumper assembly istalled Will accept hold-ope clip Optioal With hold-ope clip istalled Will accept bumper assembly Optioal With hold-ope clip ad bumper assembly istalled Optioal LCN Door Cotrol Catalog 19
20 4020T Accessories Istallatio Accessories 4020T-18 Plate 4020T-169 Track Bumper 4020T-3054 Hold-Ope Clip 4020T-3034 Track Roller Required where head frame is less tha 3-7/8 (98 mm) Requires miimum 1-3/4 (44 mm) frame face Mouts i track to assist backcheck, does ot replace auxiliary stop Limits maximum opeig Mouts i track to provide hold-ope fuctio Hold-ope poit cotrolled by clip locatio Quiet, low frictio roller assembly Shoulder dimesio X = 1/16 (2mm) Cosists of bumper, bumper post, ad moutig screw Cosists of clip ad moutig screws Requires 4020T-3034H Track Roller 4020T-3034H Track Roller Quiet, low frictio roller assembly Shoulder dimesio X = 1/16 (2mm) Sprig-loaded hold-ope mechaism 20 LCN Door Cotrol Catalog
21 4020T How-to-order 4020T closers 1. Select cylider size 4021T (ADA) 4023T 4024T 2. Specify had RH LH 3. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer will be shipped with: -Stadard cylider - Stadard cover - Stadard arm - Track roller - Stadard track - Self-reamig ad tappig screws uless optios listed below are selected. Orderig Iformatio Closer optios Cover Metal (MC) Track Stadard with Bumper (BUMPER) Hold-Ope (HO) Hold-Ope with Bumper (HBUMPER) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Screw Pack TB* & SRT Screw (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4 Istallatio Accessories Plate, 4010T-18 Special Template ST- Table of sizes Select closer based o width of door 4020T cyliders available i size 1, 3 or 4 Closig power of all 4020T closers may be icreased 15% Specify ext higher size closer where strog drafts exist Iterior door width mm mm mm mm 4021T * 4023T 4024T size 1 size 3 size 4 Miimum door width Idicates recommeded rage of door width for closer size. LCN Door Cotrol Catalog 21
22 Notes 22 LCN Door Cotrol Catalog
23 4030 Features The 4030 is a cast iro, uiversal closer desiged specifically for doors i moderate traffic coditios. This versatile closer complimets the rest of the heavy duty 4000 ad offers the choice of three moutigs ad multiple arm optios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/8 Diameter Pisto 1/2 Diameter Sigle Heat Treated Piio Joural All Weather Fluid No-Haded Templatig Peel--Stick templates /32 x 6-17/16 Moutig Hole Patter Size Adjustable Sprig Size 1-4 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Metal, Stadard Self Reamig ad Tappig Screws (SRT) Hige (Pull Side), Top Jamb (Push Side), Parallel Arm (Push Side) Regular arm Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. See idividual closer series for degrees of opeig per istallatio. ** Advaced Variable Backcheck LCN Door Cotrol Catalog 23
24 4030 Moutig details Hige (Pull) Side Moutig 4-1/2" 114 mm 1-3/4" 44 mm 11-3/8" 289 mm 9-1/4" 235 mm 2-11/16" 69 mm 1-3/8" 35 mm 3/4" 19 mm 10-3/8" 264 mm 2-7/8" 73 mm Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 180 Reveal Top Rail Should ot exceed 3/16 (5 mm) for regular arm or 3/16 (5 mm) for hold-ope arm Requires 2-7/8 (73 mm) miimum Clearace 1-3/4 (44 mm), behid door required for istallatio Maximum Opeig Ca be templated for 180 Hold-ope poits up to maximum opeig with hold-ope arm 24 LCN Door Cotrol Catalog
25 4030 Moutig details Top Jamb (Push Side) Moutig 1-3/4" 44 mm 11-3/8" 289 mm 10-3/8" 264 mm 3-5/8" 92 mm 2-7/8" 73 mm 7-5/8" 194 mm 3/4" 2-11/16" 19 mm 69 mm 1-1/2" 38 mm TJ Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where the door caot swig 180 Reveal up to 3-1/2 (89 mm) allows 180 opeig up to 7-1/2 (191 mm) with log arm allows for 140 opeig Top Rail Head Frame Requires 1-1/2 (38 mm) miimum from stop Less tha 2-1/4 (57 mm) requires PLATE, TJ Plate requires 1-1/2 (38 mm) miimum Maximum Opeig Ca be templated for 180 Hold-ope poits up to maximum opeig with hold-ope arm LCN Door Cotrol Catalog 25
26 4030 Parallel arm mout 6-1/4" 160 mm 4" 102 mm 18" 457 mm Moutig details Parallel arm (Push Side) ad EDA moutig 1-3/4" 44 mm 4" 102 mm 3" 76 mm 10-3/8" 264 mm 5" 127 mm PA EDA mout 4" 102 mm 8-1/4" 210 mm 1-3/4" 44 mm 18" 457 mm 5-1/2" 140 mm 2-1/8" 54 mm 2-3/4" 70 mm 5" 127 mm PA Butt Higes Auxiliary Stop Clearace Top Rail Should ot exceed 5 (127 mm) i width Recommeded at hold-ope poit or where a door caot swig maximum opeig For PA shoe is 4 (102 mm) from door face EDA arm is 5-1/2 (140 mm) from door face Less tha 5 (127 mm) measured from the stop requires PLATE, PA Plate requires 1-3/4 (44 mm) miimum Stop Width Miimum 1 (25 mm) Head Frame Flush or sigle rabetted requires PA SHOE ADAPTER, Blade Stop Clearace, requires 1/2 (13 mm) BLADE STOP SPACER, Auxiliary Shoe A allows istallatio of regular arm with overhead holder/stop Special templatig required EDA Arm Requires SHOE SUPPORT, for fifth screw achorage where reveal is less tha 3-1/16 (78 mm) Maximum Opeig REGULAR or HOLD-OPEN arms ca be templated for 180 EDA template allows 110 maximum opeig Hold-ope poits up to maximum opeig with hold-ope arm Notes: 4030 closers ordered with EDA arms iclude FIFTH HOLE SPACER to support the shoe REGULAR or HOLD-OPEN arm moutig requires PA SHOE, PA for regular or HOLD-OPEN arms. Add prefix P to closer descriptio (eg. P4031.) P4031 closer icludes FIFTH HOLE SPACER to support PA SHOE 26 LCN Door Cotrol Catalog
27 CUSH mout B4" 102 mm /4" 44 mm 18" 457 mm 5-1/2" 140 mm A 10-3/8" 264 mm 2-3/4" 70 mm 5" 127 mm Moutig details CUSH ad Sprig CUSH Moutig PA Sprig CUSH mout Sprig Cush dead stop poits are approximately 5 greater tha templated stop poit. B4" 102 mm 5" 127 mm 1-3/4" 44 mm 18" 457 mm 5-1/2" 140 mm A 10-3/8" 264 mm 2-3/4" 70 mm PA Clearace For CUSH or SPRING CUSH shoe is 5-1/2 (140 mm) from door face Head Frame Flush or rabetted requires CUSH FLUSH PANEL ADAPTER, CUSH or Sprig CUSH ARM Maximum opeig *100 moutig will ot work with swig clear higes. Requires SHOE SUPPORT, for fifth screw achorage where reveal is less tha 3-1/16 (78 mm) CUSH ad SPRING CUSH arms ca be templated for maximum opeig/hold-ope poit at: 85 : A = 3-5/8 (92 mm) B = 9-3/4 (248 mm) 90 : A = 3 (76 mm) B = 9-1/8 (232 mm) Note: 4031 closers ordered with CUSH or SPRING CUSH arms iclude FIFTH HOLE SPACER to support the shoe 100 *: A = 1-7/8 (48 mm) B = 8 (203 mm) LCN Door Cotrol Catalog 27
28 4030 Accessories Cyliders Covers Cast Iro Cylider Assembly No-haded Stadard MC Metal Cover No-haded Stadard Istallatio Accessories TJ Plate PA Plate CUSH Shoe Support Blade Stop Spacer Required for top jamb moutig where head frame is less tha 2-1/4 (57 mm) or flush ceilig coditio exists Required for parallel arm moutig where top rail is less tha 5 (127 mm), measured from the stop Provide achorage for fifth screw used with CUSH arms where reveal is less tha 3-1/16 (78 mm) Lowers parallel arm shoe to clear 1/2 (13 mm) blade stop Requires 1-1/2 (38 mm) miimum Rrequires 1-3/4 (44 mm) miimum A Auxiliary Shoe PA Flush Pael Adapter PA PA Shoe Requires a top rail of 7 (178 mm) Replaces -62PA for parallel arm moutig of regular arm with some overhead holder/stop Provides horizotal moutig surface for PA or CUSH shoe o sigle rabetted or flush frame Required for parallel arm moutig Optioal 28 LCN Door Cotrol Catalog
29 Arms Regular Arm LD Light Duty Arm L Log Arm Accessories No-haded No-haded No-haded Mouts hige side or top jamb P4031 closer icludes PA SHOE, PA is required for parallel arm moutig Mouts hige side, top jamb or parallel arm (62PA required) Optioal Icludes LONG ROD AND SHOE, LR for top jamb mout with deep reveals Optioal Hold-Ope Arm L Log Hold-Ope Arm EDA Extra Duty Arm EDA Hold-Ope EDA Arm No-haded No-haded No-haded Haded Mouts hige side, top jamb or parallel arm (62PA required) Hold-ope adjustable at shoe Optioal Icludes LONG HEAD AND TUBE, L for top jamb mout with deep reveals Optioal Extra duty arm features solid forged steel mai ad forearm for potetially abusive istallatios Optioal Arm, provides hold-ope fuctio adjustable at shoe Optioal CNS Cush--Stop Arm CNS Hold-Ope CUSH Arm SCNS Sprig CUSH Arm SCNS Sprig HCUSH Arm No-haded No-haded No-haded No-haded Solid forged steel mai arm ad forearm with stop i soffit shoe Optioal Provides hold-ope fuctio with templated stop/hold-ope poits Hadle cotrols hold-ope fuctio For abusive applicatios Features solid forged steel mai arm ad forearm with sprig loaded stop i the soffit shoe For abusive applicatios Features solid forged steel mai arm ad forearm with sprig loaded stop i the soffit shoe Optioal Optioal Hadle cotrols hold-ope fuctio Optioal LCN Door Cotrol Catalog 29
30 4030 Orderig Iformatio How-to-order 4030 closers 1. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer optios Fiish Custom Powder Coat (RAL) Plated Fiish, US SRI primer (use with powder coat fiishes oly) Arm Regular w/62pa (Rw/PA) Regular w/62a (R/62A) Log (LONG) Hold-Ope (H) Hold-Ope w/62pa (Hw/PA) Log Hold-Ope (HLONG) Light Duty (LD) Light Duty w/62a (LD/62A) Light Duty w/62pa (LD/PA) Light Duty Log (LDL) EDA HEDA (specify right or left had) Cush-N-Stop (CUSH) HCush-N-Stop (HCUSH) Sprig Cush (SCUSH) Sprig HCush (SHCUSH) Table of sizes Optioal Screw Packs TB*, Wood & Machie Screw (TBWMS) * Specify door thickess if other tha 1-3/4. Istallatio Accessories Plate, TJ Plate, PA CUSH Shoe Support, Blade Stop Spacer, Auxiliary Shoe, A PA Flush Pael Adapter, Special Template ST- Closer will be shipped with: - Stadard cylider - Stadard metal cover - Regular arm - Wood ad self-tappig machie screw pack uless optios listed below are selected. No-sized 4031 cylider is adjustable from sizes 1 to 4 ad is shipped set to size 3. Exterior (ad Vestibule) door width Iterior door width mm mm mm mm mm mm mm 4031 size 3 size size 2 size 3 size 4 Miimum door width Miimum door width Idicates recommeded rage of door width for closer size. Reduced opeig force 4030 closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to AUTOMATIC OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH * lbs * lbs * Maximum opeig force. 30 LCN Door Cotrol Catalog
31 4030T Features The 4031T is a sigle lever (track) arm, surface mouted closer desiged for iterior use o arrow head frames ad top rails. The choice of three moutigs ad ease of istallatio offer a versatile solutio to door cotrol i moderate traffic applicatios. The 4030T complimets the heavy duty Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/8 Diameter Pisto 1/2 Diameter Sigle Heat Treated Piio Joural All Weather Fluid No-Haded Size Adjustable Sprig Size 1-3 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Metal, Stadard Self Reamig ad Tappig Screws (SRT) Pull side o door, pull side o frame ad push side o door Stadard arm ad track Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. See idividual closer series for degrees of opeig per istallatio. LCN Door Cotrol Catalog 31
32 4030T Moutig details Hige (Pull Side) Moutig 7-5/8" 194 mm 1-3/4" 44 mm 1-5/16" 33 mm 3/4" 19 mm 24-1/2" 622 mm 7/32" 6 mm MAX. C L 2-7/8" 73 mm 1-3/8" 35 mm 1-3/8" 35 mm MIN. 10-3/8" 264 mm Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 180 Reveal Top Rail Should ot exceed 7/32 (6 mm) Requires 2-7/8 (73 mm) miimum Clearace 1-3/4 (44 mm), behid door required for istallatio Maximum Opeig Ca be templated for 180 Cosult factory if door will be held ope at 180 Hold-ope poits up to maximum opeig poit with hold-ope optio Notes: May track style door closers are capable of allowig 180 of door swig. The majority of track style closers are at their weakest closig force i the rage. Cosult factory for applicatios where door must swig LCN Door Cotrol Catalog
33 4030T Moutig details Top Jamb (Push Side) Moutig 4" 100 mm 1-3/4" 44 mm 1-5/16" 32 mm 10-3/8" 264 mm 3/4" 19 mm 3-1/4" 81 mm C L 24-1/2" 622 mm 1" 25 mm 1/8" 3 mm MAX. 1" 25 mm MIN. Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where the door caot swig 180 Reveal Top Rail Should ot exceed 1/8 (3 mm) Requires 1 (25 mm) miimum Head Frame Requires 2-7/8 (73 mm) miimum Maximum Opeig Ca be templated for 180 Cosult factory if door will be held ope at 180 Hold-ope poits up to Maximum opeig poit with hold-ope optio Notes: May track style door closers are capable of allowig 180 of door swig. The majority of track style closers are at their weakest closig force i the rage. Cosult factory for applicatios where door must swig 180. LCN Door Cotrol Catalog 33
34 4030T Moutig details Stop Face (Push) Side Moutig 1-1/2" 38 mm 24-1/2" 622 mm 1-3/4" 44 mm 1-5/16" 33 mm C L 1" 25 mm 1-1/4" 32 mm MIN. 1-1/4" 32 mm 4-1/8" 105 mm C L 11-5/8" 295 mm Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 110 Reveal Top Rail Should ot exceed 1-3/4 (44 mm) Requires 4-1/8 (105 mm) miimum measured from the stop Head Frame Miimum 1-1/4 (32 mm) Maximum opeig Ca be templated for 110 Hold-ope poits up to maximum opeig with hold-ope optio Notes: May track style door closers are capable of allowig 180 of door swig. The majority of track style closers are at their weakest closig force i the rage. Cosult factory for applicatios where door must swig LCN Door Cotrol Catalog
35 4030T Accessories Cyliders Covers Arms 4031T-3071 Cast Iro Cylider Assembly No-haded Stadard 4030T-72MC Metal Cover No-haded 4030T-3077T Stadard Arm No-haded Sigle lever mouts hige side, top jamb or stop face Track roller icluded Tracks 4030T-3038 Stadard Track No-haded No hold-ope track mouts o either side of the door Will accept hold-ope clip Stadard 4030T-3038H Hold-Ope Track No-haded Hold-ope track mouts o either side of the door Comes with 4030T-3054 Hold-ope clip Optioal Istallatio Accessories 4030T-3054 Hold-Ope Clip Mouts i track to provide holdope fuctio Hold-ope poit cotrolled by clip locatio Requires 4030T-3034H LCN Door Cotrol Catalog 35
36 4030T Orderig Iformatio How-to-order 4030T closers 1. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer optios Fiish Custom Powder Coat (RAL) Plated Fiish, US SRI primer (use with powder coat fiishes oly) Track Hold-ope (H) Closer will be shipped with: - Stadard cylider - Stadard metal cover - Stadard track - Stadard arm - Track roller - Wood ad self-tappig machie screw pack uless optios listed below are selected. Optioal Screw Packs TB*, Wood & Machie Screw (TBWMS) Table of sizes No-sized 4031T cylider is adjustable from sizes 1 to 3 ad is shipped set to size 3. Iterior door width mm mm mm 4031T size 2 size 3 Miimum door width Idicates recommeded rage of door width for closer size. Reduced opeig force 4030T closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to AUTOMATIC OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH * lbs. N/A N/A N/A 5.0* lbs. 4031T 4031T 4031T * Maximum opeig force. 36 LCN Door Cotrol Catalog
37 4040XP Features The 4040XP is LCN s most durable ad flexible heavy duty closer desiged for istitutioal ad other demadig high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearigs 1-1/2 Diameter Pisto 3/4 Diameter Double Heat Treated Piio Joural All Weather Liquid X Fluid No-Haded Templatig Peel--Stick templates - 2-1/4 x 5 Moutig Hole Patter Size Warraty Adjustable Sprig Size 1-6, icludes Pateted Gree Dial 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Hige (Pull Side), Top Jamb (Push Side), Parallel Arm (Push Side) Regular Arm Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING PARALLEL ARM STOP FACE POWDER COAT PLATED FINISH PLASTIC METAL COVER NON-HANDED NON-SIZED ACCESSIBILITY CYLINDER DELAYED ACTION*** AVB** REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK *ARM FUNCTION EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. ** Advaced Variable Backcheck. *** Delay feature icorporates stadard 4040 cylider (ot XP). LCN Door Cotrol Catalog 37
38 4040XP Moutig details Hige (Pull Side) Moutig 10-7/16" 625 mm 2-11/16" 68 mm 3/4" 19 mm 1-1/16" 27 mm 2-1/4" 57 mm 11" 279 mm 5/8" 16 mm 12-1/4" 311 mm 3-1/2" 89 mm 3-3/4" 95 mm 4040XP-18 Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig beyod 120 Reveal Top Rail Should ot exceed 3/4 (19 mm) for regular arm or hold-ope arm Less tha 3-3/4 (95 mm) requires PLATE, 4040XP-18. Plate requires 2 (51 mm) miimum Clearace Delayed Actio 2-3/8 (60 mm) behid door required for 90 istallatio Icorporates stadard 4041 cylider, without XP cylider Delays closig from 120 to 70 Delay time adjustable up to approximately 1 miute Maximum Opeig Templatig allows up to 120. Hold-ope poits 90 up to 120 with hold-ope arm. 38 LCN Door Cotrol Catalog
39 4040XP Moutig details Top Jamb (Push Side) Moutig 11/16" 17 mm 3-1/2" 89 mm 3-3/4" 95 mm 2-1/4" 57 mm 12-1/4" 311 mm 11" 279 mm 10-3/8" 264 mm 2-11/16" 68 mm 3/4" 19 mm 1-3/16" 30 mm 4040XP-18TJ 4040XP-18G Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig beyod 120 Reveal Arm Type Reveal Max Opeig Top Rail Regular Arm 2-9/16 Up to 120 Log 4-13/16 Up to 120 Hold-Ope 2-9/16 Up to 120 Log Hold-Ope Arm 8 Up to 120 Requires 1-1/4 (32 mm) miimum 2-1/4 (57 mm) miimum with closer o PLATE, 4040XP-18TJ 3 (76 mm) miimum with closer o PLATE, 4040XP-18G Head Frame Less tha 3-1/2 (89 mm) requires PLATE, 4040XP-18TJ With flush ceilig, use PLATE, 4040XP-18G. Either plate requires 1-3/4 (44 mm) miimum Maximum Opeig Templatig allows up to 120. Hold-ope poits 85 up to 120 with hold-ope arm. Delayed Actio Icorporates stadard 4041 cylider, without XP cylider Delays closig from 120 to 70 Delay time adjustable up to approximately 1 miute LCN Door Cotrol Catalog 39
40 4040XP Moutig details Parallel Arm (Push Side) Moutig 4" 102 mm 2-1/4" 57 mm 5-7/8" 149 mm 14-1/2" 368 mm 4" 102 mm 3-1/2" 89 mm 4-15/16" 125 mm 12-1/4" 311 mm 5-3/8" 137 mm 5-3/8" 137 mm 4040XP-18PA Butt Higes Auxiliary Stop Reveal Top Rail Head Frame Stop Width Blade Stop Clearace Delayed Actio Maximum Opeig Should ot exceed 5 (127 mm) i width Recommeded at hold-ope poit, where the door caot swig 180, or where CUSH-N-STOP arm is ot used Should ot exceed 7/32 (6 mm) Less tha 5-3/8 (137 mm) measured from the stop requires PLATE, 4040XP-18PA. Plate requires 2 (51 mm) miimum from the stop Flush or rabetted requires PA SHOE ADAPTER, 4040XP-419 Miimum 1 (25 mm). CUSH arm requires miimum 1-1/2 (38 mm) Clearace requires 1/2 (13mm) BLADE STOP SPACER, 4040XP XP-62PA shoe is 4 (102 mm) from door face. EDA shoe projects 5-1/2 (140 mm) from door face. CUSH shoe projects 6 (152 mm) from door face Icorporates stadard 4041 cylider, without XP cylider Delays closig from 120 to 70. Delay time adjustable up to approximately 1 miute. 180 opeig/hold-ope poits with all except CUSH arms 110 opeig/hold-ope with CUSH arms Notes: Optioal moutig requires PA SHOE, 4040XP-62PA for regular or HOLD-OPEN arms Add prefix P to closer descriptio (eg. P4040XP) P4040XP closer icludes 4040XP-201 FIFTH HOLE SPACER to support PA SHOE 40 LCN Door Cotrol Catalog
41 EDA mout 4" 102 mm 4040XP 2-1/4" 57 mm 3-1/2" 89 mm 5-1/4" 133 mm Moutig details B 14-1/16" 357 mm A 12-1/4" 311 mm EDA ad CUSH Moutig 5-1/4" 133 mm 4040XP-18PA CUSH mout 4" 102 mm 2-1/4" 57 mm 3-1/2" 89 mm 5-1/4" 133 mm B 14-1/16" 357 mm 6" 152 mm A 12-1/4" 311 mm 5-1/2" 140 mm 4040XP-18PA Clearace Head Frame CUSH ARM Delayed Actio Maximum Opeig 4040XP-62EDA is 5-1/2 (140 mm) from door face. 6 (152 mm) for CUSH Flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4040XP-419 Requires SHOE SUPPORT, 4040XP-30 for fifth screw achorage for arrow frames Icorporates stadard 4041 cylider, without XP cylider. Delays closig from maximum opeig to ; 115 with 180 template, 95 with 110 template, 85 with 100 template, 75 with 90 template. Delay time adjustable up to approximately 1 miute. EDA arm ca be templated for poits at: 110 : A = 6-3/8 (162 mm) B = 7-3/4 (197 mm) or 180 : A = 2-7/8 (73 mm) B = 4-1/4 (108 mm) Hold-ope poits up to maximum opeig with HEDA arm Notes: 4040XP closers ordered with EDA or CUSH arms iclude 4040XP-201 FIFTH HOLE SPACER to support the shoe Sprig Cush stop poits are approximately 5 more tha templated stop poit Hold ope at templated stop poits CUSH arms ca be templated for opeig/hold-ope poit at: 85 : A = 7-15/16 (202 mm) B = 9-1/8 (232 mm) 90 : A = 7-3/16 (183 mm) B = 8-1/2 (216 mm) 100 : A = 6-1/16 (154 mm) B = 7-1/4 (184 mm) or 110 : A = 5-1/16 (129 mm) B = 6-3/8 (162 mm) LCN Door Cotrol Catalog 41
1250 & 1450 SERIES SURFACE MOUNTED CLOSERS
1250 & 1450 SERIES SURFACE MOUNTED OSERS PRODUCT SELECTION GUIDE Surface mounted 1250 & 1450 Series LCN closers feature a modern slim line design for easy installation on narrow head frames and top rails.
More informationFIRE/LIFE SAFETY CLOSERS/HOLDERS SERIES
FIRE/LIFE SAFETY CLOSERS/HOLDERS SERIES PRODUCT SELECTION GUIDE SENTRONIC Series LCN closer/holders combine heavy duty closers with electrically controlled hold-open functions to control fire and smoke
More informationAUTOMATIC OPERATORS SURFACE MOUNTED PULL SIDE
AUTOMATIC OPERATORS PRODUCT SELECTION GUIDE LCN automatic operators are the proven standard in schools and health care facilities for over 20 years. They are easily retrofitted into existing doors and
More information9300BC SERIES Light Commercial Door Closer
Light Commercial Door Closer general information The 9300BC is a durable, economically priced door closer designed for commercial exterior and interior doors such as storefront and industrial applications.
More informationSTANLEY DOOR CLOSERS D-4550/D-4551 D-4550 / D-4551 SERIES OOR CLOSERS
STANLEY DOOR CLOSERS D-4550/D-4551 D-4550 / D-4551 SERIES OOR CLOSERS 1 GENERAL INFORMATION TABLE OF CONTENTS Page General Information... 2 4 How To Order...4 Standard (Pull) Application...5 Parallel Arm
More informationCircular valves. Circular valves are being used for air flow closing or as a throttling element to adjustment of necessary resistances in pipelines.
Circular valves Circular valves are beig used for air flow closig or as a throttlig elemet to adjustmet of ecessary resistaces i pipelies. Descriptio The circular valve is produced from S235 material ad
More information5300 Series. Description: Grade 1 Heavy Duty Surface Door Closer Ideal for schools, hospitals, and other high-use environments
5300 Series Description: Grade 1 Heavy Duty Surface Door Closer Ideal for schools, hospitals, and other high-use environments Certifications - BHMA Certified ANSI A156.4, adjustable sizes Arms & Brackets
More informationTS93 EMR T/PT/TDE. Surface applied door closer
TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double
More informationHolder/Release Devices with Integral Door Closers DORMA EMF/ EMR
Holder/Release Devices with Integral Door Closers DORMA EMF/ EMR DORMA EMR Holder/Release Device with Integral Detector The DORMA EMR Series holder/release device incorporates a photoelectric detector
More informationEMF/EMR. Holder/Release Devices with Integral Door Closers
EMF/EMR Holder/Release Devices with Integral Door Closers EMR TECHNICAL DETAILS DORMA EMR SERIESHOLDER/RELEASE DEVICE The DORMA EMR Series holder/ release device incorporates a photoelectric detector and
More information6000 SERIES Low Energy Power Operator
Low Energy Power Operator introduction The 6000 Series, the newest addition to the PowerMatic Family of Operators combines intelligence, reliability and superior control in one package. Designed with the
More informationDC8000 Series. Door Closers
Series Door Closers Introduction Applications High-quality products and innovative designs are the foundation for the long history and reputation of Corbin Russwin Architectural Hardware. That tradition
More informationDoor Closers. DC3000 Series
Door Closers DC3000 Series Applications DC3000 Series Applications The mid-priced, cost-effective choice for high-traffic situations. The DC3000 Series Door Closers fulfill security and life safety requirements
More informationFloor-Concealed Door Closers DORMA BTS80
Floor-Concealed Door Closers DORMA BTS80 Floor-Concealed Door Closers Dependable and Versatile Floor-Concealed Closer The BTS80 Series of floor-concealed door closers offer adaptability to almost any installation.
More informationChoosing The Right Faucet For Janitorial And Maintenance Sinks Is Important. Chicago Faucets Offers Two Spouts To Help Reduce The Risk Of Backflow
U.S. G EN BU I CO UNCIL ING M RE LD Choosig The Right Faucet For Jaitorial Ad Maiteace Siks Is Importat E M B E R Choosig the right faucet for your jaitorial or maiteace sik ca help reduce the risk of
More informationTake the guesswork out of furnishing your office. We can help you take care of your entire workspace in 3 simple steps:
Deskig Solutios from BUSH For ay space, ay taste. Now that s smart! Itroducig Deskig Solutios from Bush Combiig quality, value ad coveiece, these furiture solutios are already grouped together for hassle-free
More informationK700 series. Door Closer. Door Closer. Samhwa Precision Co., Ltd./Korea ASSA ABLOY Group Company. The global leader in door opening solutions
series Samhwa Precision Co., Ltd./Korea series Overview Features Aluminum Alloy Body Standard, separate and independent, latch, sweep and back-check intensity valve Non-handed Adjustable power : size 2~5
More informationCasting Designs, Inc.
Castig Desigs, Ic. Fort Worth, Texas 09290/CDI BuyLie 5892 Glass Fiber Reiforced Gypsum ad Cocrete Colum Covers Pilasters Domes Vaults Mouldigs Light & Reflector Coves Corice From our maufacturig plat
More informationRTS88. Overhead Concealed Door Closer
RTS88 Overhead Concealed Door Closer RTS88 OVERHEAD CONCEALED CLOSER DORMA RTS88 OVERHEAD CONCEALED DOOR CLOSER Invisible door control Dependable and easy to install Architects are often challenged to
More informationFloor-Concealed Door Closers with Electromagnetic Hydraulic Hold Open DORMA BTS80 EMB
Floor-Concealed Door Closers with Electromagnetic Hydraulic Hold Open DORMA BTS80 EMB Floor-Concealed Door Closers with Electromagnetic Hydraulic Hold Open Aesthetically Pleasing Floor Closer for Fire/Life
More information8000 SERIES Architectural Door Closer
Architectural Door Closer overview The 8000 eries Door Closers offer the ideal combination of appearance, reliability and durability in today's market. With features such as staked valves, precise valve
More informationFVS SERIES. Vertical Laboratory Autoclaves. Simplest solution for routine laboratory sterilization
FVS SERIES Vertical Laboratory Autoclaves Simplest solutio for routie laboratory sterilizatio The FVS is compact, portable, vertical Laboratory Autoclave, with very small overall dimesios for easy hadlig
More informationWood Sound Retardant Door Hardware Information Bulletin
overly overly 574 West Otterman Street Greensburg, PA 15601 Toll Free: (800) 979-7300 Local: (724) 834-7300 Fax: (724) 830-2871 Email: overly@overly.com DOOR COMPANY Wood Sound Retardant Door Hardware
More informationResidential METAL ROOFING
Residetial METAL ROOFING America Buildig Compoets is oe of the coutry s most trusted maufacturers of metal roofig systems ad wall paels for residetial applicatios. With beefits ragig from low maiteace
More informationHollandia 700-II Comfort
Holladia 700-II Comfort Full Feature Deluxe Ibuilt Suroof Product Features: Large itegrated tiltig ad slidig suroof Highly protective automotive glass pael keeps out UV rays ad heat Iterior color-matched
More informationWHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
More informationTS83. Easy action door closer
Easy action door closer THE MULTI-FUNCTION, MULTI-PURPOSE DOOR CLOSER Outstanding versatility. Quality assured. Tested to EN 1154. Decades of experience have gone into the development of the DORMA TS 83.
More informationHMMA 830 HARDWARE SELECTION FOR HOLLOW METAL DOORS AND FRAMES HOLLOW METAL MANUAL -02 NAAMM STANDARD METAL DOORS & FRAMES NAAMM 01 NAAMM 01
HOLLOW METAL MANUAL NAAMM STANDARD HMMA 830-02 METAL S & FRAMES 8d NAAMM 01 02 HARDWARE SELECTION FOR HOLLOW METAL S AND FRAMES NAAMM 01 02 8d METAL S & FRAMES A Division of HOLLOW METAL MANUFACTURERS
More informationSECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
More informationInstallation Instructions K900 series Door Closer
Installation Instructions series Non-Hold Open Models Adjustable size : 1(BF) thru 6 Optional Feature : Delayed Action An Incorrectly installed or improperly adjusted door closer can cause property damage
More information7200 series Electromechanical Closer/Holder
7200 series Electromechanical Closer/Holder introduction The 7200 Series Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. The
More informationFabrication Illustration Part No. Description Door Frame. P092 Mortised Butt Hinge P092D P092F (includes P2092 $ 48 $ 21 frame/door reinforcing)
Custom Blank Entrances - Applied Hardware & Preps - Tubelite Standard Hardware Butt Hinges Pivots C2 Page 1 P092 Mortised Butt Hinge P092D P092F (includes P2092 $ 48 $ 21 frame/door reinforcing) P795S
More informationHARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
More information>>Scheduled Maintenance Guide 2008 smart fortwo coupe and smart fortwo cabriolet
Scheduled Maiteace Guide 2008 smart fortwo coupe ad smart fortwo cabriolet SMG2008 www.smartusa.com smart - a Daimler Brad Vehicle Idetificatio Model: Sellig Dealership: Sellig Dealership Phoe Number:
More informationE-Plex Enterprise Access Control System
Eterprise Access Cotrol System Egieered for Flexibility Modular Solutio The Eterprise Access Cotrol System is a modular solutio for maagig access poits. Employig a variety of hardware optios, system maagemet
More informationDoor Hardware Lock Specifications
Door Hardware Lock Specifications Directory Lock Type Page Exterior Mortise Lock Specifications... 2 2.5 Backset Mortise Locks Specification... 3 2.5 Backset Mortise Lock Functions (6301, 6310, 6315, 6318,
More informationCluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
More information7500 SERIES. Institutional Door Closer
Institutional Door Closer overview The 7500 Series Door Closer offers customers the ideal combination of superior performance, strength and quality. Ideal for interior or exterior doors in facilities that
More informationiprox sensors iprox inductive sensors iprox programming tools ProxView programming software iprox the world s most versatile proximity sensor
iprox sesors iprox iductive sesors iprox programmig tools ProxView programmig software iprox the world s most versatile proximity sesor The world s most versatile proximity sesor Eato s iproxe is syoymous
More informationT R A N S F O R M E R A C C E S S O R I E S SAM REMOTE CONTROL SYSTEM
REMOTE CONTROL SYSTEM REMOTE CONTROL SYSTEM TYPE MRCS T R A N S F O R M E R A C C E S S O R I E S PLN.03.08 CODE NO: 720 (20A.) CODE NO: 72400 / 800 (400/800A.) CODE NO: 73000 (000A.). GENERAL This system
More informationSpecialty Closers. High-End Residential High-End Security Gate Solutions
Specialty Closers High-End Residential High-End Security Gate Solutions TABLE OF CONTENTS General Information... 3 How to Select Product... 4 Options... 5 Certifications... 6 Limited Warranty... 6 Specifications...
More informationAn ASSA ABLOY Group brand. 4800LN Series. Interconnected Locks
An ASSA ABLOY Group brand 4800LN Series Interconnected Locks performance meets style introduction The Yale 4800LN series interconnected locksets combine our key-in-lever locksets with the added safety
More informationConversion Instructions:
Coversio Istructios: QMS magicolor 2 DeskLaser to QMS magicolor 2 CX 1800502-001A Trademarks QMS, the QMS logo, ad magicolor are registered trademarks of QMS, Ic., registered i the Uited States Patet ad
More informationBaan Service Master Data Management
Baa Service Master Data Maagemet Module Procedure UP069A US Documetiformatio Documet Documet code : UP069A US Documet group : User Documetatio Documet title : Master Data Maagemet Applicatio/Package :
More informationCall for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
More informationCable Cleats. Trefoil Cable Cleat with LSF Pad. 55mm CFX-2
CFX-1 Trefoil Cable Cleat with LSF Pad 1. Recommeded for istallatios where the highest levels of short circuit withstad are required. 2. Short circuit curret tested i accordace with BS EN 50368:2003 stadard.
More informationAutomatic Door Selection Guide
Automatic Door Selection Guide AAADM 1300 Sumner Avenue Cleveland, OH 44115 P: 216-241-7333 F: 216-241-0105 aaadm@aaadm.com Automatic Door Selection Guide General: The members of AAADM manufacture an assortment
More informationHow To Fit A T.V Door Closer
TS 3 V Door Closer TS 3 V Door Closer Easy to fit, economical and with adjustable closing force Simple, easy installation, and guaranteed quality. Tested to EN 54 Specially designed for internal doors,
More informationD-4990 PRECISION HARDWARE
D-4990 PRECISION HARDWARE INTRODUCTION TABLE OF CONTENTS Page Introduction...2 ADA Blue-Paint Access...2 Features/Benefits...3 Electrical Data Specifications...4 How To Order...4 INTRODUCTION Page Standard
More informationNEWSTAR BROCHURE. December 2007
NEWSTAR BROCHURE December 2007 Surface Overhead Door Closers Door Closing 5003 Silver Slide Cover SE Door Widths from 850mm to 1100mm. Door Weights 40kg to 80kg. Suitable for use in temperatures from -15
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
More informationDomain 1: Configuring Domain Name System (DNS) for Active Directory
Maual Widows Domai 1: Cofigurig Domai Name System (DNS) for Active Directory Cofigure zoes I Domai Name System (DNS), a DNS amespace ca be divided ito zoes. The zoes store ame iformatio about oe or more
More informationINSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
More informationCommercial METAL ROOFING
Commercial METAL ROOFING Improvig Busiesses Sice 1908 The future of the commercial buildig idustry is beig built ow at America Buildig Compoets. More tha just a product provider, ABC adds value ad depedability
More informationFIRE PROTECTION SYSTEM INSPECTION, TESTING AND MAINTENANCE PROGRAMS
STRATEGIC OUTCOMES PRACTICE TECHNICAL ADVISORY BULLETIN February 2011 FIRE PROTECTION SYSTEM INSPECTION, TESTING AND MAINTENANCE PROGRAMS www.willis.com Natioal Fire Protectio Associatio (NFPA) #25 a mai
More informationSCHOOL LINE. Technical Information
Techical Iformatio The rage of taps Drop Lever has bee plaed by compay FAR i order to meet the requiremets of school sector cocerig gas taps. Through this ew lie, compay FAR has made a product with several
More informationIndustrial & Energy Producing Facilities
Idustrial & Eergy Producig Facilities The applicatio of the Tyfo FIBRWRAP System i idustrial & eergy producig facilities (buildigs, silos, chimeys, plats, uclear facilities ad more) FIBRWRAP CONSTRUCTION
More informationModified Line Search Method for Global Optimization
Modified Lie Search Method for Global Optimizatio Cria Grosa ad Ajith Abraham Ceter of Excellece for Quatifiable Quality of Service Norwegia Uiversity of Sciece ad Techology Trodheim, Norway {cria, ajith}@q2s.tu.o
More informationCONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
More informationDOREL ASIA 3-PC COUNTER HEIGHT BAR SET. Model No: DA3729 UPC CODE: 0-65857-16286-8 NOTE: / /
DOREL ASIA PC COUTER HEIGHT BAR SET Model o: DA9 UPC CODE: 058588 OTE: THIS ISTRUCTIO BOOKLET COTAIS IMPORTAT SAFETY IFORMATIO. PLEASE READ AD KEEP FOR FUTURE REFERECE. Lot number: (TAKE FROM CARTO) Date
More informationK17.12 Door closers K17. Doors 01.09.2013
K17 Doors K17.12 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. OPTIC door closer TS40(V) with scissor
More informationDIVISION 08 70 00 HARDWARE FORMAT 1. Technical specifications content and numbering system shall be based on 2004 CSI MasterFormat.
FORMAT 1. Technical specifications content and numbering system shall be based on 2004 CSI MasterFormat. BASIS OF DESIGN 1. APSU design standards shall not replace fully developed, project and market specific
More informationMADE BY VOLVO. IN INDIA.
MADE BY VOLVO. IN INDIA. The quality of Volvo trucks ad our maufacturig systems is well exhibited amog the scores of Volvo trucks i operatio i Idia, amog the toughest of coditios & applicatios. The Volvo
More informationStainless Steel Continuous Hinges
Stainless Steel Continuous Hinges Hager heavy duty continuous hinges offer proven reliability that can stand up to the daily rigors of high-traffic, high-impact areas. They re designed and engineered to
More informationComfort for Life CAPT CAPF CHPF CAUF CSCF
Comfort for Life CAPT CAPF CHPF CAUF CSCF Evaporator Coils www.daikicomfort.com "I'm a Daiki Comfort Pro" Those five simple words ca offer you comfort like you ve ever experieced. The words mea that the
More informationRose Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au
Rose Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Robert Watson Series 20 Symphony Series 1420 Symphony Series 1360 Series Door
More informationn Three 4 x 4 butt hinges per door - prevents wracking and assures smooth positive operation n Heavy duty 16 gauge steel frame
Weather Fin and bulb help keep bad weather outside and good air inside Windows: n Many light kits are available 1-LU 4 X 48 1-LE 16 X 16 1-LA 20 X 24 1-LI 20 X 24 1-B 22 X 36 1-LW 16 X 16 W/GRID 9-LB 22
More informationFluid Cooling P-Bar Series Mobile MA
luid oolig P-Bar Series Mobile IR OOLD brazed alumium ostructio eatures ow available with fully reversible Brushless D a Motors bar ad Plate Brazed lumium ore rugged, lightweight, ad compact provides the
More informationsummary of cover CONTRACT WORKS INSURANCE
1 SUMMARY OF COVER CONTRACT WORKS summary of cover CONTRACT WORKS INSURANCE This documet details the cover we ca provide for our commercial or church policyholders whe udertakig buildig or reovatio works.
More informationBasic Technical Fundamentals of Builders Hardware
Basic Technical Fundamentals of Builders Hardware Mortise Locks Bored Locks Auxiliary Locks Inside Cover (blank) Table of Contents SARGENT History...4 Basic Name of Products...5, 6 Doors (A Brief Review)...7
More informationFRAME PROFILE MASONRY METAL DOOR FRAME FLUSH MASONRY KD MITER CORNER JOINT. #8 Screw (MS002485) Required on all fire rated KD frames. Bend Tabs.
FRAME PROFILE MASONRY FLUSH MASONRY KD MITER CORNER JOINT Bend Tabs Head #8 Screw (MS002485) Required on all fire rated KD frames Corner Assembly 2" (50.8) Head Jamb Head Break Away Corner Clip Spot Welds
More informationDomain 1: Designing a SQL Server Instance and a Database Solution
Maual SQL Server 2008 Desig, Optimize ad Maitai (70-450) 1-800-418-6789 Domai 1: Desigig a SQL Server Istace ad a Database Solutio Desigig for CPU, Memory ad Storage Capacity Requiremets Whe desigig a
More informationAutomatic Door Openers and ADA Devices Rev. 0 Bid # 48240056. Scope of Work
Scope of Work I. Scope of Solicitation II. Instructions to Offerors III. Scope of Work / Specifications IV. Terms and Conditions - Special I. SCOPE OF SOLICITATION Clemson is seeking to initiate a turnkey
More informationBasic Technical Fundamentals of Builders Hardware Mortise, Bored and Auxiliary Locks
Mortise, Bored and Auxiliary Locks Copyright 2002, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Page SARGENT History...................................................
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationConfidence Intervals for One Mean
Chapter 420 Cofidece Itervals for Oe Mea Itroductio This routie calculates the sample size ecessary to achieve a specified distace from the mea to the cofidece limit(s) at a stated cofidece level for a
More informationPRODUCT INTRODUCTION PRECISION HARDWARE
PRODUCT INTRODUCTION PRECISION HARDWARE INTRODUCTION INTRODUCTION Originally located in southeastern Michigan, Precision Hardware has been manufacturing panic and fire exit hardware for over a half century.
More informationINVESTMENT PERFORMANCE COUNCIL (IPC)
INVESTMENT PEFOMANCE COUNCIL (IPC) INVITATION TO COMMENT: Global Ivestmet Performace Stadards (GIPS ) Guidace Statemet o Calculatio Methodology The Associatio for Ivestmet Maagemet ad esearch (AIM) seeks
More informationCI/SfB. (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems
Uniclass L4181 EPIC D181 CI/SfB (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems Interior Sliding Door Gears FOR CUPBOARDS, WARDROBES, INTERIOR SLIDING AND FOLDING DOORS A comprehensive range of
More informationBio-Plex Manager Software
Multiplex Suspesio Array Bio-Plex Maager Software Extract Kowledge Faster Move Your Research Forward Bio-Rad cotiues to iovate where it matters most. With Bio-Plex Maager 5.0 software, we offer valuable
More informationDC6000 Series. Door Closers
eries Door Closers Introduction Applications Corbin Russwin s history combines high-quality product and innovative design. That tradition continues with the Grade 1 eries door closer, designed and engineered
More informationDORMA ED 800 SERIES Service Manual
DORMA ED 800 SERIES Service Manual ED 800J ED 800T software level 3.27M www.dorma-usa.com 1-800-523-8483 INSPK NO. 08280020 Rev.08/07 08280021 08/07 TABLE OF CONTENTS Page Status Light...3 Status Light
More informationCLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
More informationThe most reliable electronic faucets you can buy.
Electroic Faucets The most reliable electroic faucets you ca buy. 100 people. 6 times a day. 18 years. Just oe faucet. Ad we have the umbers to prove it. The HyTroic ad E-Troic 40 Over seve years ago,
More informationODBC. Getting Started With Sage Timberline Office ODBC
ODBC Gettig Started With Sage Timberlie Office ODBC NOTICE This documet ad the Sage Timberlie Office software may be used oly i accordace with the accompayig Sage Timberlie Office Ed User Licese Agreemet.
More informationConfiguring Additional Active Directory Server Roles
Maual Upgradig your MCSE o Server 2003 to Server 2008 (70-649) 1-800-418-6789 Cofigurig Additioal Active Directory Server Roles Active Directory Lightweight Directory Services Backgroud ad Cofiguratio
More informationArchitectural Hardware Design Guide High-performance hardware for the most demanding architectural applications
08710/STA BuyLine Architectural Hardware Design Guide High-performance hardware for the most demanding architectural applications Architectural Hardware Design Guide The full range of Stanley hinges provides
More informationsecurity solutions for your home
security solutions for your home www.prowlerproof.com.au Copyright 2004 Gershwin Pty Ltd ABN 220 641 02816 PRODUCT APPLICATIONS PRODUCT RANGE Prowler Proof manufactures a full range of products to suit
More informationRoxul ComfortBatt. Thermal Batt Insulation for Residential & Commercial Construction
Thermal Batt Isulatio for Residetial & Commercial Costructio Thermal batt isulatio Superior Buildig Evelope Performace Roxul Comfortbatt is a semi-rigid batt isulatio desiged specifically for wood ad steel
More information1000 Series Knob Pushbutton Locks
1000 Series Knob Pushbutton Locks This series is ideal for limiting access in high-traffic areas. Two access control functions are available in addition to standard combination access control: Key Override:
More informationReachout Lock Replacement for Andersen 2-Panel and 4-Panel 400 Series Frenchwood Gliding, 200 Series Narroline, and Perma-Shield Gliding Patio Doors
for Andersen 2-Panel and 4-Panel 400 Series Frenchwood Gliding, 200 Series Narroline, and Perma-Shield Gliding Patio Doors Thank you for choosing Andersen. For questions call 1-888-888-7020. For more information
More informationDomain 1: Identifying Cause of and Resolving Desktop Application Issues Identifying and Resolving New Software Installation Issues
Maual Widows 7 Eterprise Desktop Support Techicia (70-685) 1-800-418-6789 Domai 1: Idetifyig Cause of ad Resolvig Desktop Applicatio Issues Idetifyig ad Resolvig New Software Istallatio Issues This sectio
More informationRefrigerant Distributors. February 2011 / BULLETIN 20-10
Refrigerat Distributors February 2011 / BULLETIN 20-10 WARNING USER RESPONSIBILITY Failure or improper selectio or improper use of the products described herei or related items ca cause death, persoal
More informationBasic Fire Door Requirements
TECHNICAL DATA SERIES S D I 118-01 Basic Fire Door Requirements 2001 Steel Door Institute STEEL DOOR INSTITUTE 30200 DETROIT ROAD - CLEVELAND, OHIO 44145 Technical Data Series SDI 118-2001 Basic Fire Door
More informationDecorative Lever Designs
Decorative Lever Designs 3 & C 4 & K 12 14 & D 15 & A 16 & B 17 50 51 52 53 54 55 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 2 www.stanleysecuritysolutions.com
More informationBASIC FIRE DOOR REQUIREMENTS TECHNICAL DATA SHEET NO. 401
BASIC FIRE DOOR REQUIREMENTS SHEET NO. 401 Fire door openings are classified by their locations in the building. The location determines the length of exposure protection required, based on the potential
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More information239S SUPER LUBE SUPREME SAE 10, 30 AND 50
239S SUPER LUBE SUPREME SAE 10, 30 AND 50 Super Lube Supreme is a premium high performace para-sythetic fluid that is specially formulated to meet the demadig requiremets of moder trasmissio, fial drive,
More informationAuxiliary hardware & general information. Exit devices
Auxiliary hardware & general information Exit devices Introduction Since pioneering the first exit device in 1908, Von Duprin life safety products have provided unparalleled quality, performance and flexibility
More informationDIVISION 08 70 00 HARDWARE FORMAT 1. Technical specifications content and numbering system shall be based on 2004 CSI MasterFormat.
FORMAT 1. Technical specifications content and numbering system shall be based on 2004 CSI MasterFormat. BASIS OF DESIGN 1. BGSU Design Standards shall not replace fully developed, project and market specific
More information