Bench Type Sand Rammers
|
|
|
- Prudence Parsons
- 7 years ago
- Views:
Transcription
1 Bench Type s Michigan Pneumatic Model MP00GNN Lightweight, streamlined design for better control and reduced operator fatigue. Hard, rapid hitting performance ideal for refractory sand work. Additional rubber butts available in 1 or diameter. Bore...11/16" Stroke...2" Taper... S Blows Per Minute Length Weight lbs. Butt Diameter...1 Rubber Michigan Pneumatic Model MP0B Lightweight, rugged construction delivers fast hitting performance. Lower operator fatigue. Additional rubber butts available in 1 to diameter. Stroke...2" Blows Per Minute Length /2" Weight lbs. Air Inlet Thread...1/ Butt Diameter... Rubber Nippon Pneumatic Model B00A Improved sand rammer delivers fast, powerful blows with minimal shock. New throttle lever design provides greater ease of handling for ramming small and medium flasks on jobs molded on the bench. Ideal for the core room. Also used for light backfill tamping. Additional rubber butts available in 1 to diameter. 15/8" Rubber Butt Bore... Stroke... 23/8" Taper... S Blows Per Minute Length...1 Weight lbs. Butt Diameter...15/8" Rubber Nippon Pneumatic Model B0A Improved sand rammer delivers fast, powerful blows for ramming small, medium and large flasks on the bench or floor. New throttle lever design provides greater ease of handling with reduced operator fatigue. Additional rubber butts available in to diameters. F41010D700 2" Rubber Butt Bore...7/8" Stroke... 2 Taper... M Blows Per Minute Length /16" Weight...7 lbs. Butt Diameter...2" Rubber Nippon Pneumatic Model B1A Fast, hard hitting design to deliver maximum power for smooth, efficient work. Lightweight, improved construction provides ease of operation and control. Great for heavy tamping, ramming fire clay and ideal for furnace work. Additional rubber butts available in to diameters. 124 F42010D700 Rubber Butt Stroke... 41/2" Taper... ML Blows Per Minute Length /8" Weight lbs. Butt Diameter... Rubber
2 Bench Type s Michigan Pneumatic Model MPBD2BA Most popular bench rammer manufactured. Powertoweight ratio exceeds all others in its class. Identical to the original Master Power and Black & Decker tools. Additional rubber butts available in or diameter. Stroke... Blows Per Minute Length / Weight lbs. Butt Diameter... Rubber Michigan Pneumatic Model MPBD1BA Ideal for use where more compacting force and reliability are a must. Manufactured using the highest quality steel and materials to ensure long life with minimal repairs. Additional rubber butts available in or diameter. Model MPBD1BAFR with flat rod piston available. Stroke... Blows Per Minute Michigan Pneumatic Model MP130 Length / Weight...10 lbs. Butt Diameter... Rubber Lightweight for compacting sand molds in foundries. Unique doubleaction seal protects the tool from dirt and other contaminants for longer tool life. Model MP130FR with flat rod piston available. Additional rubber butts available in 1 or. Stroke... Taper Blows Per Minute Length /2" Weight lbs. Air Inlet Thread...1/ Butt Diameter... Rubber Michigan Pneumatic Model MP140 Unique doubleaction seal protects the tool from dirt and other contaminants for longer tool life. Model MP150 floor type tamper also available. Additional rubber butts available in or. Bore... 11/8" Stroke... Taper Blows Per Minute Length...20" Weight lbs. Air Inlet Thread...1/ Butt Diameter... Rubber 81/8" Michigan Pneumatic Model MPB401MR Corner Rammer Strong and lightweight with a single reciprocating piston and grip ring throttle. Delivers a rapid compacting action which effectively rams refractory material and sand in hard to reach areas SP Rubber Butt Stroke...9/16" Blows Per Minute Length / Weight lbs. Butt Diameter... Rubber 125
3 Floor Type Tampers Michigan Pneumatic Model MPBD2BALR /Tamper Popular rammer with powertoweight ratio exceeding all others in its class. Identical to the original Master Power and Black & Decker tools. Additional rubber butts available in or diameter. Stroke... Taper Blows Per Minute Length...425/16" Weight lbs. Butt Diameter Rubber Michigan Pneumatic Model MPBD1BALR /Tamper Ideal for use where more compacting force and reliability are a must. Manufactured using the highest quality steel and materials to ensure long life with minimal repairs. Additional rubber butts available in or diameter. Model MPBD1BAFRLR with flat rod piston available. Stroke... Taper Blows Per Minute Length...413/8" Weight lbs. Butt Diameter Rubber Michigan Pneumatic Model MP241A1M /Tamper Easy to hold from a standing position. Perfect for compacting large molds. MP241A1MFR with flat rod piston available. Michigan Pneumatic Model MP341A1M /Tamper Favorite among municipal utility crews. Proven tool for backfilling around foundations. Optional 31/2" steel butts available. Model MP441 also available. Bore... 15/16" Stroke... Taper Blows Per Minute Length...5 Weight lbs. Butt Diameter Rubber 126 Bore...15/8" Stroke... Blows Per Minute Length...52 Weight lbs.
4 Floor Type Tampers Nippon Pneumatic Model F1 /Tamper Developed to bridge the gap between bench rammers and floor rammers. Ideal for compacting sand in molds that cannot be accessed with a bench style rammer. Additional rubber butts available in to diameters. Stroke...45/16" Taper...ML Blows Per Minute Length...433/16" Weight lbs. Butt Diameter Rubber Nippon Pneumatic Model F2 /Tamper Designed with a new automatic valve which eliminates unnecessary maintenance normally encountered with sand and dirt abrasion. Piston is plated for long life. Ideal for backfill tamping between foundations and other job site obstructions. Additional rubber butts available in to diameters. Bore...11/ Stroke...423/32" Taper...L Blows Per Minute Length... 4 Weight lbs. Butt Diameter 2 Rubber Nippon Pneumatic Model F4 /Tamper Delivers rapid, powerful blows for heavyduty tamping. Designed to compact soil around foundations and backfill in trenches. Chrome plated piston rod resists wear caused by dirt and sand abrasion. Piston rod packing and adjustments can be performed on the job without the need of special tools. Additional rubber butts available in to diameters. Bore...19/16" Stroke...423/32" Blows Per Minute Length... 4 Weight lbs. Michigan Pneumatic Model MP6T /Tamper Designed for operator comfort, maximum work output and minimum maintenance. Delivers rapid, powerful blows for compacting soil around foundations and backfilling trenches. Pole butt and 31/2" steel butt available. Bore...11/2" Stroke...51/2" Blows Per Minute Length... 49" Weight lbs. 127
5 Bench Rammer Accessories Rubber Rammer Butts Made of the finest neoprene to ensure uniformity of bonding. Highly resistant to oil and wear. Please specify tool model number and size of butt when ordering. Solid aluminum, steel and rectangular butts available. Throttle s Fits: MP1F, MPF4 & MP114 Model 033 #201 #202 #203 #204 #205 F54000D700 1/2" Tool MP00GNN MP20BA B00A MP130 MP140 MP150 MP0B MPBD2BA MPBD2BALR MPBD1BA MPBD1BALR MP241A1M Butt 201S 202S 203S Size 11/2" 1 1 Tool MP10BA B0A F0 MP14 B1A F1 MP114 MP1F F2 MPF4 MP6T F4 MP341A1M Butt 201M 202M 203M 204M 202ML 203ML 204ML 202L 203L 204L 205L 203T F54000D T 205T Size 1 37/16" Fits: MP1F, MPF4 & MP114 Model 24SRA160 1/2" Steel Rammer Butts Fits: IR341, IR441, APT131, Thor & CP RG F53A00D210 RG01420 RG03420 F54A00D210 Model 241SRA160E Large Volume 34SRST M78 Tool Butt Size Bolt Part No. MP00G, MP20BA & B00A MP10BA, B0A & F0 MP14, B1A & F1 RG01420 RG03420 RG04420 MP1F & F2 RG06420 F53A00D210 2 MPBD2BA, MPBD2BALR, MPBD1BA & MPBD1BALR TX00202 w/bolt hole TX00203 MP6T & MP341A1M MPF4 & F4 6" Steel Butts Fits: Thor 6T & 66T, IR 34 & 341, Jet 06 & APT131 Backfill Tampers Model " Steel Butt 34SR SRST M78 RG07420 RG07420SP F54A00D210 Bolt 6" w/bolt hole 33/8" 51/ UShape 6" 6" w/bolt hole 311/32" Fits: MPF4, MPB66 and most backfill tampers (does not accommodate butt locking screw) Model RG " Steel Butt 34SR85 34SR85 Fits: IR341, IR441, APT131, Thor & CP Model 241SRA160STEEL Large Volume
TAMPERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
TAMPERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1064 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Check the tamping butt lock screw, it must be tightened
RIVET BUSTERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1038 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill and attach an in-line oiler to the air tool. Use air
Straight & Needle Scalers
Straight & s Michigan Pneumatic Model MP1BL Scaling Hammer Lever Throttle New, improved design features smooth action throttling characteristics. Easy to handle, powerful tool widely used as a general
CHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
Innovative Products For Unique Applications. A Tradition of Excellence. Creative Engineering for Fluid Systems. Earthquake Proof Valves
A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry Pratt Company became a trusted name in the flow control industry, setting the
MORE CARE. BUILT IN. VOLVO EXCAVATOR. hydraulic hammers
MORE CARE. BUILT IN. VOLVO EXCAVATOR hydraulic hammers For extra-tough conditions, Volvo hammers deliver high impact Stubborn rock. Concrete debris. Frost-locked earth. These are the kinds of conditions
OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST
HUSKIE TOOLS, INC. OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST GENERAL INFORMATION GUIDE FOR S-240 CUTTER The following steps are guidelines for safe operation of the Huskie
Mueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION
Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless
758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
Experience In Motion. Valtek Spring Cylinder Linear Actuators
Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators
Precision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
HYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
ANYTHING ELSE IS A COMPROMISE
ANYTHING ELSE IS A COMPROMISE THE REVOLUTION BEGAN IN 1993. That s when Iron Grip transformed the fitness industry with an unwavering commitment to groundbreaking design and state-of-the-art production
RAMMER HITS FIRST CONTENT COMPACT RANGE 108... 4-7 211... 4-7 315... 4-7 522... 4-7
HAMMERS 1 CONTENT COMPACT RANGE 108... 4-7 211... 4-7 315... 4-7 522... 4-7 RAMMER HITS FIRST The world s best-known and most-respected brand of hydraulic hammers offers a comprehensive range of powerful,
FX TYPHOON 12. Table of Contents
Owner s Manual FX TYPHOON 12 Table of Contents Table of Contents Warranty Specifications General Instructions Operating Instructions Loading the Magazine Trigger Adjustments Care & Maintenance Recommended
Norbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
SQUARE TRUSS: 2' long square truss SUPPORT BARS:
play Technolo SQUARE TRUSS: DP-T12 DP-T10 DP-T08 DP-T06 DP-T05 DP-T04 DP-T03 DP-T02 12' long square truss 10' long square truss 8' long square truss 6' long square truss 5' long square truss 4' long square
Operating Instruction Manual For S-40B Hydraulic Cutters With Parts List
HUSKIE TOOLS, INC. Operating Instruction Manual For S-40B Hydraulic Cutters With Parts List GENERAL INFORMATION GUIDE FOR S-40B CUTTER The following steps are guidelines for safe operation of the Huskie
*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...
Mueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
Service Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
ITT Industrial Products
ITT Industrial Products Providing custom industrial solutions to meet customers application needs globally. ITT Control Technologies GmbH under the ITT Enidine brand provides quality energy absorption
Cat. Sizes to fit Cat Skid Steer Loaders, Wheel Loaders, Telehandlers, Backhoe Loaders, and most other manufacturers models.
Cat tires enhance productivity with design innovations and with the valuable option of purchasing your tires complete as mounted assemblies. Cat dealers and Cat tire retailers stock wheel types, sizes,
THE SIMPLEX HAND PUMP
INTRODUTION HND PUMPS THE SIMPLEX HND PUMP Pivoting linkage reduces wear for longer pump life. djustable pivot for the absolute lowest handle effort. Large bronze piston for more speed and durability.
CHICAGO PNEUMATIC SPRING 2013. Gyldig til 30062013. Alle priser i NOK, nto. eks. mva. Maintenance. People. Passion. Performance.
CHICAGO PNEUMATIC SPRING 2013 Gyldig til 30062013 Alle priser i NOK, nto. eks. mva. Maintenance People. Passion. Performance. CP7729 CP7748 2172,- ³ ₈, 563 Nm, 1,26 kg Art nr 894 107 7290 2333,- ½, 1250
For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.
For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. 2 0 0 5 D U K E A I R X C / S L / R A C E S E R V I C E G U I D E Information
Tube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
Angle & General Line Drills
Angle & General Line Drills Michigan Pneumatic MP31DRST 1/4" Air Drill Reversible Features a forward/reverse switch and a twospeed trigger. Durable composite motor housing and planetary gear system with
The work of this Section includes furnishing and installing Reinforced Concrete Pressure Pipe as shown on the Drawings and as specified.
Section 33 0200- Page 1 of 4 PART 1 - GENERAL 1.1 DESCRIPTION OF WORK The work of this Section includes furnishing and installing Reinforced Concrete Pressure Pipe as shown on the Drawings and as specified.
YUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
HYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
QTA Series. Torque Reaction Arms
QTA Series Torque Reaction Arms See and feel the difference of Bench-mounted torque arms There s a lot riding on the quality of your assemblies, regardless of your manufacturing process. People are counting
Wall braces with a swivel head are included to accommodate all roof pitches.
ULTRA JACK MODEL # 2000 Wall braces with a swivel head are included to accommodate all roof pitches. Product Specifications Model # 2000 Description: Ultra Jack Unit Pack: Weight per Pack: 1 / Carton 32
HAMMER, BREAK, DESTROY, SMASH, CRACK, OBLITERATE, POUND, FLATTEN,
HAMMER, BREAK, DESTROY, SMASH, CRACK, OBLITERATE, POUND, FLATTEN, YOUR WAY THROUGH THE DAY. MOUNTED BREAKERS, VIBRATORY COMPACTORS, AND DROP HAMMERS CATEGORY MOUNTED YEAR 14-15 FORMAT PRODUCT CATALOG Hydraulic
Premium Conventional. General Tire Information. High quality; low operating cost. Pneumatic ride in extreme conditions.
Tire and Overview Premium Conventional 185-9932 254 mm (10 419 mm (16.5 185-9933 304 mm (12 419 mm (16.5 High quality; low operating cost. Skid Steer Loader Tires 5436 XD 222-3962 254 mm (10 419 mm (16.5
THE RANGE... supplied by S P O R T
THE RANGE... supplied by S P O R T Underlever Spring Powered Air Rifles HW97K Weihrauch s legendary spring powered Field Target rifle. Underlever action. A scope only Karbine air rifle. Fixed barrel precision,
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Bolt shut-off with integrated 2-way actuator pneumatically
Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY.
Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY. Air Pressure 586.1 min 689.5 kpa max [85 min 100 psi max] Air Displacement 721,000 mm 3 [44 in. 3 ] Figure 1 Weight
PUSH-PULL CABLES CONTROL SYSTEMS
ISO 9001 CERTIFIED PUSH-PULL CABLES CONTROL SYSTEMS WESCON PRODUCTS COMPANY A subsidiary of LATSHAW ENTERPRISES, INC. WESCON'S PUSH-PULL CONTROL SYSTEMS Push-Pull Cable Ends Wescon Push-Pull Cable Assemblies
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
OP300S / OP350 2:1 RATIO TRANSFER PUMP
OP300S / OP350 2:1 RATIO TRANSFER PUMP OPERATING MANUAL WITH PARTS IDENTIFICATION Copyright 2013 International Pump Manufacturing, Inc. This manual contains IMPORTANT WARNINGS and INSTRUCTIONS. Read and
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Adjustments for the Active Pneumatic Vibration Isolation Table during Final Installation (File version 6)
Adjustments for the Active Pneumatic Vibration Isolation Table during Final Installation (File version 6) Loosening the valves on the steel base plates of the valve assemblies during the installation procedure
Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT)
Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Price (excl VAT) Michelin Inner Tube, 3.00/3.25 x 17" 11.00 9.17 Michelin Inner Tube, 3.25/3.50/4.10 x 18" 13.00 10.83 Michelin Inner
NORMAN FILTER COMPANY PRODUCT OVERVIEW
NORMAN FILTER COMPANY PRODUCT OVERVIEW LEADING THE WAY IN QUALITY FILTRATION WWW.NORMANFILTERS.COM FILTER ELEMENT INTERCHANGE Tee-Type Filter 4500, 14500, 34500, and 54500 Series Mini Tee-Type Filter 4100
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS 3 TIMKEN BALL BEARING HOUSED UNITS DESIGNED FOR OPTIMIZED PERFORMANCE For more than 110 years, Timken innovations continue to keep the world in motion, including
The Assembly Automation Industry
System Solutions For The Assembly Automation Industry Your Resource For Motion Control Components, Systems and Solutions Assembly Automation Industry: A Focus Parker means components, systems and partnerships
MODEL T200-F18 MODEL T125-F18 Finish Nailers
P MODEL T200-F18 MODEL T125-F18 Finish Nailers IMPORTANT! DO NOT DESTROY It is the customer s responsibility to have all operators and service personnel read and understand this manual. OPERATING MANUAL
Manual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
FJ2. 2 Ton Trolley Floor Jack Assembly & Operating Instructions
FJ2 2 Ton Trolley Floor Jack Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
DeZURIK 3" (75MM) & LARGER ECCENTRIC PLUG VALVES
BULLETIN 12.00-1C SUPERSEDES 12.00-1C & 12.60-1A JUNE 2014 DeZURIK 3" (75MM) & LARGER ECCENTRIC PLUG VALVES www.dezurik.com The DeZURIK Eccentric Plug Valve In thousands of installations worldwide, DeZURIK
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
Ceriani Replica GP35R forks. Technical description
Ceriani Replica GP35R forks Technical description This is an advanced racing replica of the GP35 forks. The legs are made from 6061 aluminium, mounted with CNC machined fittings, the stanchions are from
Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
REPAIR INSTRUCTIONS UNDER BODY CYLINDER (UM, UL)
Table of contents 1. Introduction... 3 1.1. Scope of use... 3 1.2. General remarks... 3 1.3. Contact Hyva... 3 1.4. Precautions... 4 1.5. Spare parts... 4 1.5.1. Prior to use... 4 1.6. Recycling and Reuse
M A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
SUNNDA CORPORATION. Mud Pump Parts & Expendables. Boost Your Bottom Line! Sunnda Corporation
SUNNDA CORPORATION Boost Your Bottom Line! Mud Pump Parts & Expendables Sunnda Corporation 4543 Brittmoore Road, Houston, TX 77041 USA Phone: +1-713-849-5678 Fax: +1-713-849-5687 E-mail: sales@sunnda.com
The Axial Flow Valve. Class 300/600. sales@elster-instromet.co.uk www.elster-instromet.com SERIES
The Axial Flow Valve SERIES Class 300/600 sales@elster-instromet.co.uk www.elster-instromet.com THE AXIAL FLOW VALVE - SERIES 300/600 A UNIQUE REGULATOR What is the Axial Flow Valve? The Axial Flow Valve
Hydraulic & Mechanical Power. SC106 Product Catalog. A Century of Product Integrity
SC106 Product Catalog A Century of Product Integrity Hydraulic & Mechanical Power cylinders hand pumps mechanical accessories power pumps lifting jacks hydraulic tools bolting presses TABLE OF CONTENTS
ELECTRICAL CONNECTORS
ELECTRICAL CONNECTORS 07-09 00-09 04-09 99-09 116 ELECTRICAL CONNECTORS LIGHT POWER MODULES WORKS WITH STANDARD & LED BULBS! WORKS WITH STANDARD & LED BULBS! CALL US TODAY FOR YOUR MODULITE VEHICLE APPLICATION
LINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing
AIR POWER GLOSSARY. Air Outlet/Hose Connection An air outlet/hose connection is a 1-1/4 NPT thread fitting where the air hose attaches.
Absolute Pressure the gauge pressure plus the atmospheric pressure. At sea level, the gauge pressure in pounds per square inch (PSI) plus 14.7 gives the absolute pressure in pounds per square inch (PSIA).
ROUGHNECK II Pumpless Drain
SERVICE BULLETIN SB4027 Rev. I 1/11 For Used Oil Only ROUGHNECK II Pumpless Drain Model #4110-022 FOR USED OIL ONLY (Black) For Antifreeze Only Model #4110-023 FOR USED ANTIFREEZE ONLY (Green) Patent #
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
ELECTRIC PERISTALTIC MORTAR POINTING PUMP
ELECTRIC PERISTALTIC MORTAR POINTING PUMP pointing gun & control valve ACF405 PERISTALTIC PuMP hopper feed roller & tube pump for refurbishment & repair trades heritage & conservation bridge & underground
glass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
Pneumatic Tires. Specialist Tires for Maximum Efficiency
Pneumatic Tires Specialist Tires for Maximum Efficiency Radial Pneumatic Tires from Continental Continental Industrial Pneumatic Tires provide comfort on all surfaces and therefore offer the protection
product manual 08.09 H-4210A PORTABLE STATIC CONE PENETROMETER
08.09 product manual H-4210A PORTABLE STATIC CONE PENETROMETER PORTABLE STATIC CONE PENETROMETER GENERAL INFORMATION The H-4210A Static Cone Penetrometer is an unparalleled device for measuring soil consistency.
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator
Pneumatic Actuators. Crafted without compromise, to make your life easier. The Leader in Actuator Technology
Pneumatic Actuators Crafted without compromise, to make your life easier The Leader in Actuator Technology Early in his career, the founder of QTRCO, Ed Holtgraver, was responsible for field service of
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
HARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
WELDING & CUTTING MAIN EQUIPMENT
GASES DIVISION GAS WELDING & CUTTING EQUIPMENT WELDING & CUTTING MAIN EQUIPMENT GAS WELDING & CUTTING KIT The MARIGASES GAS WELDING AND CUTTING KIT is a high quality set containing all the tools and components
Merkel Seals and Sealing Systems for the Metal Processing Industry. Product Information Metal Processing Industry
Merkel Seals and Sealing Systems for the Metal Processing Industry Product Information Metal Processing Industry Simrit, Your Global Technology Specialist for Seals and Vibration Control Simrit, Your Global
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
Close Coupled & Back To Wall WC Saintaryware. Fitting Instructions
Close Coupled & Back To Wall WC Saintaryware Fitting Instructions Before starting any installation project please consider the following: Prior to drilling into walls, check there are no hidden electrical
NEGRP TEST SUMMARY. Joseph A. Lanzoni, November 2005
NEGRP TEST SUMMARY Joseph A. Lanzoni, November 2005 The National Electrical Grounding Research Project (NEGRP) was a project managed and sponsored by the National Fire Protection Association (NFPA) Research
Introduction. Angle/Flared/Sequence/Changeover Service Valves. Valves D-193. www.usa.siemens.com/hvac
Introduction Angle/Flared/Sequence/Changeover Service D-193 In this section, you will find flared, angled, sequence and changeover valves for use in service applications. D-194 Need additional assistance?
Maxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
GS-General Service Control Valves
GS-General Service Control Valves GS-General Service Valves The GS-General Service Valves continue Copes-Vulcan s tradition of designing and manufacturing control valves that provide both exceptional service
Fabricated Drainage Products
Fabricated Drainage Products Complete Drainage System Inline Drains are used At the beginning of a drain line Add a new water inlet to an existing drain line using a riser pipe and tee HARCO Surface Drainage
www.huskietools.com 71
www.huskietools.com 71 S-Series Hydraulic Handheld Cutters P. 75 Ratchet Cable Cutters P. 73 Low Pressure Cable Cutter P. 79 SP-Series Hydraulic Handheld Cutter Heads P. 77 Cable and Insulation Strippers
*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
Mueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source.
Mueller Pipe Repair Products Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. SERVICE SADDLES Mueller service saddles, available in bronze,
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
Check Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
Flygt Ball Check Valves
4/13 Supersedes: 6/96 The basic purpose of a check valve is to permit flow in one direction, prevent flow in the opposite direction and perform this function automatically and with minimum maintenance.
Mercedes 722.3 722.4
96 Mercedes 7. 7. 5 6 7 8 - Clutch K - Brake Band B - Disc Brake B - Wide Planet Pinion 5 - One-Way Clutch F 6 - Clutch K 7 - Brake Band B 8 - Narrow Planet Pinion Int. Band Fwd. Band Rev. Clutch Direct
HYDROSTATIC TEST PUMPS
HYDROSTATIC TEST PUMPS MANUAL HYDROSTATIC TEST PUMPS Ideal for testing residential water lines. Also for pressure testing small pressure tanks, sprinkler, boiler and solar systems. Lightweight and easy
TOOL SCHEMATIC AND PARTS MODEL 3150/38 W16R STAPLER
P MODEL 3150/38 W16R STAPLER IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #403606 for detailed information on this tool. It is the customer's responsibility to have all operators
TABLE 1. Rugged cast aluminum alloy casing,celcon waterways with nichrome parts White (unless stainless steel housing)
CHRONOMITE INSTANT-FLOW MICRO WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No.
Makes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles