MODULAR JACKS. Now You`re Connected!
|
|
- Hilary Johnson
- 7 years ago
- Views:
Transcription
1 A m p h e n o l C o m m e r c i a l P r o d u c t s A m e r i c a s MODULAR JACKS P R O D U C T C A T A L O G U E Now You`re Connected!
2 Amphenol The Company Amphenol Commercial Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities are dedicated to the design, development, and manufacturing of interconnect products intended for use in the data communications and telecommunications markets. Our expertise in understanding and supporting our customers interconnect needs has earned Amphenol Canada a reputation of quality and excellence among the world s leading users of electronic components. About the Catalogue This modular jack catalogue represents some of our more popular products within this product category. Other product categories include, but is not limited to: D-Sub, Micro-Ribbon, USB, Headers and Sockets, CoolPower connectors, VHDCI, Capacitively Decoupled BNC, filtered connectors (D-Subs and micro-ribbon), and rugged connectors (RJ, USB, D-Subs, and bulkhead adapters). All of our modular jacks are RoHS compliant. All drawings in this document are measured in inches [mm], unless otherwise indicated. 1 Notice: Specifications are subject to change without notice. Contact your nearest Amphenol sales office for the latest specifications. All statements, information, and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed, or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement, and are not recommended to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Amphenol and RJ vista are registered trademarks.
3 Contents Right Angle (Side Entry) THROUGH- HOLE RJHSE: Tab Up, Multiport RJE37: Tab Up, Single Port, Low Profile RJESE: Tab Up, RJ45 & RJ11, Standard Profile RJE01: Tab Up, RJ11 (Six Position) RJSBE: Tab Down, 1, 2 and 4 Port FRJAE: Tab Down, Filtered and Shielded RJE02: Tab Down, Single Port, High Profile RJE03: Tab Down, Single Port, Low Profile RJE05: Tab Down, Ultra Low Profile RJE09: Tab Down, Standard Profile RJULE: Tab Down, Recessed, Low Profile RJE73: Tab Down, Single Port, Low Profile SURFACE MOUNT RJSSE: Tab Up, with Light Pipes RJCSE: Tab Up, Standard Profile RJLSE: Tab Down, Ultra Low Profile RJE07: Tab Down, Single Port RJE15: Tab Down, Single Port, Low Profile PRESS FIT RJE56: Tab Down, RJ45 Stacked RJSAE: 2, 4 & 8 Ports with Shield Options RJSNE: 4 over 4 Ports with Shield Options Vertical (Top Entry) RJHSE: RJE06: RJE08: RJE23: RJE74: RJE88: RJE1J: Single Port, Standard Profile Single Port, Slim Profile Single Port, Standard Profile Single Port, Surface Mount Single Port, Standard Profile Single Port, Low Profile Single Port, Narrow Profile Category 5e RJE48: Right Angled, Low Profile RJE58: Right Angled, Standard Profile RJE72: Right Angled, Recessed, Low Profile Category 6 RJE45: Single Port, Low Profile RJE59: Right Angled, Standard Profile RJE71: Right Angled, Recessed, Low Profile Category 6A RJE60: Right Angled, Standard Profile Accessories RJE17: RJ45 Coupler LED Options 82 FRJ-2411: FRJ-2611: RJ45 Dust Cover* RJ11 Dust Cover* Note: Denotes LEDs are available for connectors in the series *For more information on our dust covers, please visit our website or us at sales@amphenolcanada.com 2
4 THROUGH-HOLE RJHSE T U, M, LED TAB UP, MULTIPORT, WITH LEDS A series of EMI Quiet Modular Jack connectors with built-in LEDs. This product is ideal for LAN applications such as adapter cards and routers. Shielded and non-shielded versions are available, with a variety of LED colors and ports. SPECIFICATIONS Material Insulator: Contacts: Shield: LED: Mechanical Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 260 C for 5 secs max. Operating Temperature: -55 C to + 85 C UL File #: E CSA File #: LR *Note: Connectors without LEDs are suitable for IR Reflow ORDERING INFORMATION High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on soldering tail Stainless steel with tin dipped tails Tin plating on LED tails Electrical Contact resistance: Insulation resistance: Current Rating: Voltage Rating: DWV: Standard LEDs: Forward Voltage: Reverse Voltage: Luminous Intensity: Low Current LEDs: Forward Voltage: Reverse Voltage: Luminous Intensity: 20 mω max. 500 MΩ min. at 500V DC for 2 mins max. 1.5 Amps per contact 125 Volts AC 1000 VAC, 60 Hz. 1 min. For 5.0 V Systems 2.1 Volts typical 6 Volts min. 0.5 mcd min. at 2mA For 3.3 V Systems 2 Volts typical 6 Volts min. 1 mcd min. at 2mA RJHSE - X X X X - XX Version 3 - Vertical mount, 8 positions, 30µ gold plating 5 - Right angle, 8 positions, 50µ gold plating 7 - Right angle, 6 positions, 50µ gold plating L - Right angle, low profile, 8 positions, 50µ gold plating N - Vertical mount, 8 positions, 50µ gold plating Shield Options 0 - No shield 3 - Shield with top and side tabs (single port has top tabs only) 4 - For single port only: Shield with top and side tabs F - Shield without top, side or bottom tabs P - Shield with top & bottom tabs, for vertical mount connector Number of Ports Blank - 1 Port 02-2 Ports 04-4 Ports 06-6 Ports 08-8 Ports LED Options Click to view page 82 for options Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts 3 Click to Return to Table of Contents Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need.
5 THROUGH-HOLE RJHSE T U, M, LED Single Port Non-Shielded RJHSE-508X*.620 [15.75].590 [14.99].035±.002 [ 0.89±0.05] HOLES 8 REQ'D.170 [4.32].520 [13.21] Amphenol.128±.002 [ 3.25±0.05].095 [2.41].200 [5.08].110 [2.79].040 [1.02] TYP..080 [2.03] TYP..280 [7.11].500 [12.70] Shielded - With Top & Side Ground Tabs.530±.015 [13.46±0.38].650±.015 [16.51±0.38] LED 2 LED 1 Amphenol.145±.015 [3.68±0.38].215±.015 [5.46±0.38].105±.015 [2.67±0.38].620±.015 [15.75±0.38].100±.015 [2.54±0.38] CONTACT TAILS.125±.015 [3.18±0.38] LED TAILS TIN DIPPED ZONE.540 [13.72].130 [3.30].090 [2.29] TYP..020 [0.51].062±.015 [ 1.57±0.38].128±.015 [ 3.25±0.38].110 [2.79].040 [1.02] TYP..080 [2.03] TYP..070 [1.78].500 [12.70].640 [16.26] RJHSE-548X.035±.015 [ 0.89±0.05] HOLES 12 REQ'D (BASED ON 2 LEDS).190 [4.83].360 [9.14].170 [4.32].135 [3.43] Vertical Mount RJHSE-338X LED [13.59].650 [16.51] Amphenol LED [15.88].150 [3.81].130 [3.30] CONTACT TAILS.125 [3.17] LED TAILS TIN DIPPED ZONE.090 [2.29] TYP..062±.002 [ 1.57±0.05].080 [2.03] TYP..040 [1.02] TYP..110 [2.79].180 [4.57].500 [12.70].640 [16.26].540 [13.72].130 [3.30].035±.002 [ 0.89±0.05] HOLES 12 REQ'D (BASED ON 2 LEDS).230 [5.84].167 [4.24].135 [3.43].035 [0.89].128±.002 [ 3.25±0.05].280 [7.11] 4
6 THROUGH-HOLE RJHSE T U, M, LED Single Port RJHSE-L38X Shielded - Low Profile.620 [15.75].590 [14.99].035±.002 [ 0.89±0.05] HOLES 8 REQ'D.170 [4.32].520 [13.21] Amphenol.128±.002 [ 3.25±0.05].110 [2.79].040 [1.02] TYP..080 [2.03] TYP..095 [2.41].280 [7.11].200 [5.08].500 [12.70] Multi Port Non-Shielded RJHSE-508X [62.99] LED 2 LED [14.99] Amphenol Amphenol Amphenol Amphenol.520 [13.21].095 [2.41].125 [3.17].200 [5.08].620 [15.75] TYP..540 [13.72] TYP..090 [2.29] TYP..020 [0.51].035±.002 [ 0.89±0.05] HOLES 48 REQ'D (BASED ON 2 LEDS PER PORT).170 [4.32].360 [9.14].110 [2.79].040 [1.02] TYP..080 [2.03] TYP..280 [7.11] TYP..620 [15.75] TYP [59.94].128±.002 [ 3.25±0.05] USE 3.25mm DRILL BIT TO DRILL HOLE DIAMETER. DO NOT USE 3.18mm or 3.20mm DRILL BIT 5
7 THROUGH-HOLE RJHSE T U, M, LED Multi Port Shielded RJHSE-538X [63.75].780 [19.80].530 [13.46] Amphenol Amphenol Amphenol Amphenol.126 [3.19] CONTACT TAILS.157 [3.99] LED TAILS TIN DIPPED ZONE.132 [3.35].270 [6.86] PURE TIN DIPPED ZONE.620 [15.75] TYP..540 [13.72] TYP..090 [2.29] TYP..020 [0.51].062±.002 [ 1.57±0.05] HOLES 4 REQ'D.128±.002 [ 3.25±0.05].110 [2.79].040 [1.02] TYP..080 [2.03] TYP..280 [7.11] TYP..620 [15.75] TYP..870 [22.10].070 [1.78].620 [15.75] [59.94] [63.50].035±.002 [ 0.89±0.05] HOLES 48 REQ'D (BASED ON 2 LEDS PER PORT).135 [3.43].170 [4.32].360 [9.14].400 [10.16] Notes 6
8 THROUGH-HOLE RJE37 T U, S P, L P, LED TAB UP, SINGLE PORT, LOW PROFILE, WITH LEDS Single port through-hole (THT) series with multiple shield and LED options. Similar to our single port RJHSE series, but with a slightly lower profile and longer body. Inverted latch orientation for easy mating with industry standard plugs. SPECIFICATIONS Material Insulator: Contacts: Shield: LED: Mechanical High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on soldering tail Stainless steel with tin dipped tails Tin plating on LED tails Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 260 C for 5 secs max. Operating Temperature: -55 C to + 85 C *Note: Connectors without LEDs are suitable for IR Reflow Electrical Contact resistance: 20 mω max. Insulation resistance: 500 MΩ min. at 500V DC for 2 mins max. Current Rating: 1.5 Amps per contact Voltage Rating: 125 Volts AC DWV: 1000 VAC, 60 Hz. 1 min. LED Forward DC Current: 20mA typical LED Forward Voltage: 2.6 Volts max. at 2mA LED Reverse Voltage: 5 Volts min. LED Light Intensity: 7 to 11 mcd min. at 20mA (for single colours) 6 mcd min. at 20mA (for bicolours) LED Wave Length: Yellow: 585 ± 7 nm measured at 20mA Green: 568 ± 6 nm measured at 20mA Red: 640 ± 5 nm measured at 20mA ORDERING INFORMATION RJE37-1 X8 8 - X X X 0 Number of Ports 1-1 Port Number of Positions 8-8 Positions Number of Contacts 8-8 Contacts Shield Options 0 - No shield 2 - Shield with full tabs 3 - Shield with top tabs only Modifier 0 - Standard product LED Options Click to view page 82 for options Contact Plating 1-6µ gold plating 2-15µ gold plating 3-30µ gold plating 4-50µ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 7 Click to Return to Table of Contents
9 THROUGH-HOLE RJE37 T U, S P, L P, LED Single Port Non-Shielded.622 [15.80] LED 2 Amphenol 8 1 LED [12.25].125 [3.18].740 [18.80].202 [5.13].125±0.01 [3.18±0.2500] FOR ALL LED AND CONTACT TAILS.470 [11.94] TYP. TYP..035 [ 0.89] HOLES 8 REQ'D.060 [1.53].050 [1.27] TYP..470 [11.94] RJE XX0.038 [ 0.97] HOLES 4 REQ'D BASED ON 2 LEDS.288 [7.32].348 [8.84].128 [ 3.25] HOLES 8 REQ'D.025 [0.63].508 [12.90] Shielded - With Full Tabs LED [16.31] Amphenol 8 1 LED [12.50].125 [3.18].760 [19.30].212 [5.38].125±0.01 [3.18±0.25] FOR ALL LED AND CONTACT TAILS TIN DIPPED ZONE.470 [11.94] TYP. TYP..035 [ 0.89] HOLES 8 REQ'D.062 [ 1.57].060 [1.53].082 [2.08].050 [1.27] TYP..470 [11.94].634 [16.10] RJE XX0.038 [ 0.97] HOLES 4 REQ'D BASED ON 2 LEDS.142 [3.61].288 [7.32].128 [ 3.25] HOLES 8 REQ'D.025 [0.63].348 [8.84].508 [12.90] Shielded - With Top Tabs Only LED [16.31] 8 1 LED [12.50].125 [3.18].760 [19.30].212 [5.38].125±0.01 [3.18±0.25] FOR ALL LED AND CONTACT TAILS TIN DIPPED ZONE.470 [11.94] TYP. TYP..035 [ 0.89] HOLES 8 REQ'D.062 [ 1.57].060 [1.53].082 [2.08].050 [1.27] TYP..470 [11.94].634 [16.10] RJE XX0.038 [ 0.97] HOLES 4 REQ'D BASED ON 2 LEDS.142 [3.61].288 [7.32].128 [ 3.25] HOLES 8 REQ'D.025 [0.63].348 [8.84] [12.90]
10 THROUGH-HOLE RJESE T U, RJ45 RJ11, S P TAB UP, RJ45 & RJ11, STANDARD PROFILE This family of EMI quiet modular jack connectors with integrated LEDs features the same data transfer capabilities as our existing series of LED-integrated modular jacks. This product is an economical solution ideal for LAN applications and is intended for use with low temperature soldering processes. Shielded and non-shielded versions are available with a variety of LED options. Also offered in both single and multi port configurations. SPECIFICATIONS Material Insulator: Contacts: Shield: LED: Mechanical High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on soldering tail Stainless steel with tin dipped tails Tin plating on LED tails Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 260 C for 5 secs max. Operating Temperature: -55 C to + 85 C *Note: Connectors without LEDs are suitable for IR Reflow Electrical Contact resistance: 20 mω max. Insulation resistance: 500 MΩ min. at 500V DC for 2 mins max. Current Rating: 1.5 Amps per contact Voltage Rating: 125 Volts AC DWV: 1000 VAC, 60 Hz. 1 min. LED Forward DC Current: 20mA typical LED Forward Voltage: 1.9 Volts max. at 2mA (for single colours) 2.6 Volts max. at 2mA (for bicolours) LED Reverse Voltage: 5 Volts min. LED Light Intensity: 0.4 to 1.5 mcd min. at 2mA (for single colours) 0.5 mcd min. at 2mA (for bicolours) LED Wave Length: Yellow: 587 ± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA ORDERING INFORMATION RJESE - X X X X - X X XX Version 3 - Vertical mount, 8 positions, with panel stops 7 - Right angled, 6 positions 8 - Right angled, 8 positions Shield Options 0 - No shield 3 - Standard shield, 1 to 8 port (single port without side tabs) 4 - Single port shield, top and side tabs Special Identifier Blank - Standard black housing 02 - Yellow housing colour 03 - Red housing colour Number of Ports 1-1 Port 2-2 Ports 4-4 Ports 9 Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts LED Options Click to view page 82 for options Click to Return to Table of Contents Contact Plating 0-6µ gold plating 1-15µ gold plating 2-30µ gold plating 3-50µ gold plating F - 1~3µ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need.
11 THROUGH-HOLE RJESE T U, RJ45 RJ11, S P Single Port Non-Shielded RJESE-808X-X1.540 [13.72].090 [2.29] TYP..020 [0.51] LED [15.75] LED [14.99].035 [0.89] ø.035±.002 [ø0.89±0.05] HOLES 12 REQ'D (BASED ON 2 LEDS).170 [4.32].360 [9.14].520 [13.21].122 [3.10] ø.128±.002 [ø3.25±0.05].095 [2.41].200 [5.08].100 [2.54].110 [2.79].040 [1.02] TYP..080 [2.03] TYP..280 [7.11].500 [12.70] Shielded RJESE-848X-X1 LED [13.46].500 [12.70].650 [16.51] LED [2.67].215 [5.46].620 [15.75].125 [3.18].100 [2.54].090 [2.29] TYP..130 [3.30] ø.035±.002 [ø0.89±0.05] HOLES 12 REQ'D (BASED ON 2 LEDS) ø.128±.002 [ø3.25±0.05].540 [13.72] ø.062±.002 [ø1.57±0.05].360 [9.14].170 [4.32].135 [3.43].080 [2.03] TYP..040 [1.02] TYP..110 [2.79].280 [7.11].180 [4.57].500 [12.70].640 [16.26] 10
12 THROUGH-HOLE RJESE T U, RJ45 RJ11, S P Multi Port Non-Shielded RJESE-808X-X [62.99] LED 2 LED [14.99].520 [13.21] CONTACT TAIL.125 [3.17] LED TAIL.090 [2.29].200 [5.08].620 [15.75] TYP..540 [13.72] TYP..090 [2.29] TYP..020 [0.51].128±.002 [ 3.25±0.05].035±.002 [ 0.89±0.05] HOLES 48 REQ'D (BASED ON 2 LEDS PER PORT).170 [4.32].360 [9.14].110 [2.79].040 [1.02] TYP..080 [2.03] TYP..280 [7.11] TYP..620 [15.75] TYP [59.94] Shielded RJESE-838X-X [63.75].620 [15.75] LED 2 LED [13.46].125 [3.18].105 [2.67].215 [5.46] PURE-TIN DIPPED ZONE.620 [15.75] TYP..540 [13.72] TYP..090 [2.29] TYP..020 [0.51].062±.002 [ 1.57±0.05] HOLES 4 REQ'D.620 [15.75].035±.002 [ 0.89±0.05] HOLES 48 REQ'D (BASED ON 2 LEDS PER PORT).170 [4.32].360 [9.14].400 [10.16].110 [2.79].040 [1.02] TYP..080 [2.03] TYP..280 [7.11] TYP..620 [15.75] TYP..870 [22.10].070 [1.78] [59.94] [63.50].135 [3.43].128±.002 [ 3.25±0.05] 11
13 THROUGH-HOLE RJE01 T U, RJ11 (S P ) TAB UP, RJ11 (SIX POSITION) The RJE01 series of 6-position jacks are designed for superior EMI performance. The inverted connector provides shorter leads, eliminating the EMI antenna effect of the standard connector footprint. Typical performance improvement over their standard connector counterparts is 5-10 db over the frequency range. SPECIFICATIONS Material Insulator: Contacts: Shield: Electrical Contact resistance: Insulation resistance: Current Rating: Voltage Rating: DWV: High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on soldering tail Stainless steel with tin dipped tails 20 mω max. 500 MΩ min. at 500V DC for 2 mins max. 1.5 Amps per contact 125 Volts AC 1000 VAC, 60 Hz. 1 min. Mechanical Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 260 C for 5 secs max. Operating Temperature: -55 C to + 85 C UL File #: E CSA File #: LR ORDERING INFORMATION RJE01 - X X X - XX Contact Plating 1-6µ gold plating 6-50µ gold plating G - 15µ gold plating J - 30µ gold plating Number of Contacts 2-2 Contacts 4-4 Contacts 6-6 Contacts Number of Ports 01-1 Port 02-2 Ports Shield Options 0 - No Shield 1 - Front/rear tab options for single port 2 - Shield with side & PCB tails 4 - Shield without tabs & PCB tails 5 - Shield without tabs, with shielded PCB tails Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. Click to Return to Table of Contents 12
14 THROUGH-HOLE RJE01 T U, RJ11 (S P ) Single Port Non-Shielded.475 [12.07].650 [16.51].035±.002 [ 0.89±0.05] HOLES 6 REQ'D.136±.002 [ 3.45±0.05] RJE01-X [3.05].200 [5.08].507 [12.88].300 [7.62].110 [2.80].040 [1.02].080 [2.03].200 [5.08].375 [9.52].087 [2.22] Shielded.517 [13.13] AT FRONT.676 [17.17].062±.002 [ 1.57±0.05].035±.002 [ 0.89±0.05] HOLES 12 REQ'D RJE01-X [3.05].160 [4.06].515 [13.08].313 [7.95].110 [2.80] TIN DIPPED ZONE.136±.002 [ 3.45±0.05] HOLES 12 REQ'D.040 [1.02] TYP..080 [2.03] TYP..200 [5.08].375 [9.52].495 [12.57].200 [5.08].060 [1.52].087 [2.22] Multi Port Non-Shielded.502 [12.75].950 [24.14].650 [16.51].475 [12.07].080 [2.03] TYP..040 [1.02] TYP..088 [2.22] RJE01-X ±.002 [ 0.89±0.05] HOLES REQ'D BASED ON # OF CONTACTS.120 [3.05].136±.002 [ 3.45±0.05].200 [5.08].300 [7.62].110 [2.80].850 [21.59] Shielded.515 [13.08] [24.79] AT FRONT.313 [7.95].676 [17.17].110 [2.80] TIN DIPPED ZONE.035±.002 [ 0.89±0.05] HOLES 12 REQ'D.136±.002 [ 3.45±0.05].040 [1.02] TYP..080 [2.03] TYP..200 [5.08].475 [12.07].062±.002 [ 1.57±0.05].850 [21.59].970 [24.64] RJE01-X [3.05].160 [4.06].200 [5.08].060 [1.52].088 [2.22]
15 THROUGH-HOLE RJSBE T D, 1, 2 4 P LED TAB DOWN, 1, 2 AND 4 PORT WITH LEDS The RJSBE series of modular jacks supports Ethernet Protocols. Shielding is available with or without a Ferrite Filter filter for increased EMI performance and LEDs for link activity and network speed verification. SPECIFICATIONS Material Insulator: Contacts: Shield: LED: Mechanical High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on soldering tail Copper alloy; nickel plated with tin dipped tails Tin plating on LED tails Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 260 C for 5 secs max. Operating Temperature: -55 C to + 85 C UL File #: E CSA File #: LR *Note: Connectors without LEDs are suitable for IR Reflow Electrical Contact resistance: 20 mω max. Insulation resistance: 500 MΩ min. at 500V DC for 2 mins max. Current Rating: 1.5 Amps per contact Voltage Rating: 125 Volts AC DWV: 1000 VAC, 60 Hz. 1 min. LED Forward DC Current: 20mA typical LED Forward Voltage: 1.9 Volts max. at 2mA (for single colours) 2.6 Volts max. at 2mA (for bicolours) LED Reverse Voltage: 5 Volts min. LED Light Intensity: 0.4 to 1.5 mcd min. at 2mA (for single colours) 0.5 mcd min. at 2mA (for bicolours) LED Wave Length: Yellow: 587 ± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA ORDERING INFORMATION RJSBE - X X X X - C X Version 5-8 Positions, 50µ gold plating 7-6 Positions, 50µ gold plating D - 8 Positions, 6µ gold plating G - 8 Positions, 15µ gold plating J - 8 Positions, 30µ gold plating Shield Options 0 - No shield 2 - Shield with top and side tabs, filtered 3 - Shield with top and side tabs, no filter F - Shield with no tabs, no filter Number of Ports Blank - 1 Port 02-2 Ports 04-4 Ports LED Options Click to view page 82 for options Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. Click to Return to Table of Contents 14
16 THROUGH-HOLE RJSBE T D, 1, 2 4 P LED Single Port RJSBE-508X-C1 Non-Shielded CONTACT POS. #1.620 [15.75] CONTACT POS. #8.670 [17.02] Amphenol.493 [12.52] CONTACT TAILS.125 [3.18] LED TAILS LED 2 LED [5.21] TYP..050 [1.27] TYP..075 [1.91].035±.002 [ 0.89±0.05] HOLES 12 REQ'D (BASED ON 2 LEDS PER PORT).325 [8.25].128±.002 [ 3.25±0.05].020 [0.51] TYP..500 [12.70].540 [13.72] Shielded RJSBE-538X-C1.774 [19.66].695 [17.66].650 [16.51] LED 2 Amphenol LED [14.27].125 [3.17].500 [12.69].163 [4.14].018 [0.47].069 [1.75].047 [1.19] TIN DIPPED ZONE.035±.002 [ 0.89±0.05] HOLES 12 REQ'D BASED ON 2 LEDS.062±.002 [ 1.57±0.05].540 [13.72].350 [8.89].215 [5.46].050 [1.27] TYP..075 [1.91].070 [1.78].325 [8.25].165 [4.19].128±.002 [ 3.25±0.05].280 [7.11].500 [12.70].640 [16.26].020 [0.51] TYP. 15
17 THROUGH-HOLE RJSBE T D, 1, 2 4 P LED Multi Port Non-Shielded CONTACT POS. # [62.99] CONTACT POS. #8.478 [12.14].670 [17.02] RJSBE-508X-C4 Amphenol Amphenol Amphenol Amphenol.493 [12.52] LED 2 LED [5.21].620 [15.75] TYP. TYP..050 [1.27] TYP..075 [1.91].035±.002 [ 0.89±0.05] HOLES 48 REQ'D (BASED ON 2 LEDS PER PORT).128±.002 [ 3.25±0.05].325 [8.25].425 [10.79].020 [0.51] TYP..540 [13.72] TYP..620 [15.75] TYP [59.94].165 [4.19] Multi Port Shielded CONTACT POS. #1 CONTACT POS. # [63.76].695 [17.66] RJSBE-538X-C4 Amphenol Amphenol Amphenol Amphenol.500 [12.69] CONTACT TAILS LED 2 LED [15.75] TYP. TYP..050 [1.27] TYP..075 [1.91].035±.002 [ 0.89±0.05] HOLES 48 REQ'D (BASED ON 2 LEDS PER PORT).125 [3.18] LED TAILS.215 [5.46].062±.002 [ 1.57±0.05] TIN DIPPED ZONE.280 [7.11] TYP [8.25] [10.79].128±.002 [ 3.25±0.05].020 [0.51] TYP..540 [13.72] TYP..620 [15.75] TYP [59.94].070 [1.78] TYP..165 [4.19] 16
18 THROUGH-HOLE FRJAE T D, F S TAB DOWN, FILTERED AND SHIELDED The FRJAE series of shielded and filtered modular jacks offer low cost and effective EMC control within standard RJ11 & RJ45 connector footprints. EMC control is offered by a completely shielded connector and/or with the use of a high resistivity, high impedance Ferrite Block. No board layout changes are required for its use. Simply replace the standard non-filtered connector for superior EMC performance. SPECIFICATIONS Material Insulator: Contacts: Shield: Filter: Impedance Characteristics High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on soldering tail Copper alloy; nickel plated with tin dipped tail High impedance, high resistivity Ferrite Block Mechanical Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 260 C for 5 secs max. Operating Temperature: -55 C to + 85 C UL File #: E CSA File #: LR68598 *Note: Suitable for IR Reflow IMPEDANCE (ohms) FREQUENCY (MHz) Electrical Contact resistance: Insulation resistance: Current Rating: Voltage Rating: DWV: 20 mω max. 500 MΩ min. at 500V DC for 2 mins max. 1.5 Amps per contact 125 Volts AC 1000 VAC, 60 Hz. 1 min. ORDERING INFORMATION FRJAE - X X X - XX Version 4-8 Positions 6-6 Positions Shield Options 0 - Non-filtered without shield 1 - Filtered with front tab shield 3 - Non-filtered with front tab shield 4 - Filtered without shield 6 - Filtered with rear tab shield 7 - Filtered without PCB tails shield 8 - Non-filtered with rear tab shield Number of Ports Blank - 1 Port 02-2 Ports 04-4 Ports 06-6 Ports 08-8 Ports Number of Contacts 2-2 Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 17 Click to Return to Table of Contents
19 THROUGH-HOLE FRJAE T D, F S Single Port Non-Shielded.550 [13.97].710 [18.03].450 [11.43].350 [8.89] TYP..050 [1.27] TYP..050 [1.27] FRJAE-A [ 0.89] HOLES REQ'D BASED ON # OF CONTACTS.120 [3.05].500 [12.70].250 [6.35].100 [2.79].310 [7.87].125 [3.18].070 [1.78].590 [14.99].136 [ 3.45] Shielded.575 [14.60].735 [18.67].450 [11.43].350 [8.89] TYP..050 [1.27] TYP..050 [1.27] FRJAE [ 0.89] HOLES REQ'D BASED ON # OF CONTACTS.120 [3.05].510 [12.95].062 [ 1.57] HOLES FOR SHIELD REAR TABS (2 REQ'D).250 [6.35].110 [2.79].320 [8.13].125 [3.18] PURE-TIN DIPPED ZONE.070 [1.78].590 [14.99].136 [ 3.45] Multi Port Non-Shielded.710 [18.03] FRJAE-4X8-0X FERRITE (OPTIONAL).500 [12.70].550 [13.97] TYP..350 [8.89] TYP. TYP..050 [1.27] TYP..050 [1.27].136±.002 [ 3.45±0.05].062±.002 [ 1.57±0.05] HOLES FOR SHIELD FRONT TABS (2 REQ'D).110 [2.79].136±.002 [ 3.45±0.05] HOLE FOR 8 PORT ONLY CENTRAL PEG (FOR 8 PORT ONLY).035±.002 [ 0.89±0.05] (CENTRAL 4, 6 OR ALL 8 REQ'D PER PORT).062±.002 [ 1.57±0.05] (ONLY FOR 4, 6, 8 PORT).120 [3.05].410 [10.41].180 [4.57].250 [6.35].530 [13.46].310 [7.87].125 [3.17].062±.002 [ 1.57±0.05] HOLES FOR SHIELD REAR TABS (2 REQ'D) Number of ports [30.48] [25.40] [58.42] [53.34] [86.36] [81.28] [114.30] [109.22] A C 18
20 THROUGH-HOLE FRJAE T D, F S Multi Port Shielded FRJAE-418-0X.735 [18.67] TYP. FERRITE (OPTIONAL).510 [12.95] TYP..110 [2.79] CENTRAL PEG PURE-TIN DIPPED ZONE (FOR 8 PORT ONLY).320 [8.13] BACK TAB ONLY FOR 4, 6, 8 PORT.125 [3.17].550 [13.97] TYP..350 [8.89] TYP. TYP..050 [1.27] TYP..050 [1.27].136±.002 [ 3.45±0.05].062±.002 [ 1.57±0.05] HOLES FOR SHIELD FRONT TABS (2 REQ'D).110 [2.79].136±.002 [ 3.45±0.05] HOLE FOR 8 PORT ONLY.035±.002 [ 0.89±0.05] (CENTRAL 4, 6 OR ALL 8 REQ'D PER PORT).062±.002 [ 1.57±0.05] (ONLY FOR 4, 6, 8 PORT).120 [3.05].410 [10.41].180 [4.57].250 [6.35].530 [13.46] Number of ports.062±.002 [ 1.57±0.05] HOLES FOR SHIELD REAR TABS (2 REQ'D) B [31.24] [25.40] [59.18] [53.34] [87.12] [81.28] [115.06] [109.22] C Notes 19
21 THROUGH-HOLE RJE02 T D, S P, H P TAB DOWN, SINGLE PORT, HIGH PROFILE RJE02 series is a group of products within a family of standard modular jacks designed to meet requirements for a variety of applications options within the RJE02 family include options with and without a panel stops, and RJ11 & RJ45 configurations. SPECIFICATIONS Material Insulator: Contacts: Shield: Electrical Contact resistance: Insulation resistance: Current Rating: Voltage Rating: DWV: High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on soldering tail Copper alloy; nickel plated with tin dipped tail 20 mω max. 500 MΩ min. at 500V DC for 2 mins max. 1.5 Amps per contact 125 Volts AC 1500 VAC, 60 Hz. 1 min. Mechanical Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 260 C for 5 secs max. Operating Temperature: -40 C to + 85 C *Note: Connectors with high temp. material are suitable for IR Reflow ORDERING INFORMATION RJE02-1 X X - 0 X X 0 Number of Ports 1-1 Port Number of Positions 4-4 Positions 6-6 Positions 8-8 Positions Number of Contacts 2-2 Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Modifier 0 - Standard product Panel Stop Options 1 - Without panel stop 2 - With panel stop Contact Plating 1-6µ gold plating 2-15µ gold plating 3-30µ gold plating 4-50µ gold plating Shield Options 0 - No shield Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. Click to Return to Table of Contents 20
22 THROUGH-HOLE RJE02 T D, S P, H P Single Port Non-Shielded RJE02-1XX-0X20 SHARP FOR 6 & 8 POS'N RADIUS FOR 4 POS'N SEE DETAIL 'B' FOR 4 POS'N BOARDLOCK.236 [6.00].810 [20.57] TYP..050 [1.27] TYP..350 [8.89] DETAIL 'B' FRONT.145 [3.68] DETAIL 'B' SIDE.143 [3.63].050 [1.27].416 [10.57].128 [3.25] Part # RJE X20 RJE X20 RJE X20 RJE X20 RJE X20 RJE X20 No. of Positions No. of Contacts A.540 [13.72].540 [13.72].620 [15.75].620 [15.75].620 [15.75].700 [17.78] B.440 [11.18].440 [11.18].520 [13.21].520 [13.21].520 [13.21].600 [15.24] Dimensions C.309 [7.85].309 [7.85].389 [9.88].389 [9.88].389 [9.88].469 [11.91] D.300 [7.62].300 [7.62].400 [10.16].400 [10.16].400 [10.16].450 [11.43] E.050 [1.27].150 [3.81].050 [1.27].150 [3.81].150 [3.81].350 [8.89] Quantity Quanity per tray per carton Notes 21
23 THROUGH-HOLE RJE03 T D, S P, L P TAB DOWN, SINGLE PORT, LOW PROFILE RE03 series is a group of products within a family of standard modular jacks designed to meet requirements for a variety of applications. Options within the RJE03 family include shielded and non-shielded, and RJ11 & RJ45 configurations. SPECIFICATIONS Material Insulator: Contacts: Shield: Electrical Contact resistance: Insulation resistance: Current Rating: Voltage Rating: DWV: High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on soldering tail Copper alloy; nickel plated with tin dipped tail 20 mω max. 500 MΩ min. at 500V DC for 2 mins max. 1.5 Amps per contact 125 Volts AC 1000 VAC, 60 Hz. 1 min. Mechanical Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 260 C for 5 secs max. Operating Temperature: -40 C to + 85 C *Note: Connectors with high temp. material are suitable for IR reflow ORDERING INFORMATION RJE03-1 X X - X X X 0 Number of Ports 1-1 Port Number of Positions 6-6 Positions 8-8 Positions Number of Contacts 2-2 Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Modifier 0 - Standard product Panel Stop Options 1 - Without panel stop 2 - With panel stop Contact Plating 1-6µ gold plating 2-15µ gold plating 3-30µ gold plating 4-50µ gold plating Shield Options 0 - No shield 2 - Partial shield (must have panel stop) Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. Click to Return to Table of Contents 22
24 THROUGH-HOLE RJE03 T D, S P, L P Single Port RJE X10 Non-Shielded.600±.015 [15.24±0.38].710±.015 [18.03±0.38] TYP..050 [1.27] TYP..035±.002 [ 0.89±0.05] HOLES 8 REQ'D.050 [1.27].495±.015 [12.57±0.38].150±.012 [3.81±0.30].128±.002 [ 3.25±0.05].350 [8.89].310±.010 [7.87±0.25].450 [11.43] Shielded with Panel Stop RJE X [17.78].624 [15.86].105 [2.67] TYP..722 [18.34].350 [8.89] TYP..050 [1.27] TYP..050 [1.27].035 [ 0.90].519 [13.19].491 [12.48].020 [0.50].138±0.16 [3.50±0.40].128 [ 3.25].350 [8.89].142 [3.61].063 [ 1.60].120 [3.05].021 [0.53].183 [4.65].048 [1.22].120 [3.05].320 [8.12].350 [8.89].085 [2.16].450 [11.43].620 [15.75] Notes 23
25 THROUGH-HOLE RJE05 T D, U L P TAB DOWN, ULTRA LOW PROFILE RJE05 series is a group of products within a family of standard modular jacks designed to meet requirements for a variety of applications. Options within the RJE05 family include shielded or non-shielded, and RJ11 & RJ45 configurations. SPECIFICATIONS Material Insulator: Contacts: Shield: Electrical Contact resistance: Insulation resistance: Current Rating: Voltage Rating: DWV: High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on soldering tail Copper alloy; nickel plated with tin dipped tail 20 mω max. 500 MΩ min. at 500V DC for 2 mins max. 1.5 Amps per contact 125 Volts AC 1000 VAC, 60 Hz. 1 min. Mechanical Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 260 C for 5 secs max. Operating Temperature: -40 C to + 85 C UL File #: E *Note: Connectors with high temp. material are suitable for IR Reflow ORDERING INFORMATION RJE05-1 X X - X X 1 0 Number of Ports 1-1 Port Number of Positions 4-4 Positions 6-6 Positions 8-8 Positions A - 10 Positions Number of Contacts 2-2 Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts A - 10 Contacts Modifier 0 - Standard product Panel Stop Options 1 - No panel stop Contact Plating 1-6µ gold plating 2-15µ gold plating 3-30µ gold plating 4-50µ gold plating Shield Options 0 - No shield 1 - Standard, front PBC tabs 5 - Shield with top and side tabs 8 - Standard, back PBC tabs Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. Click to Return to Table of Contents 24
26 THROUGH-HOLE RJE05 T D, U L P Single Port RJE X10 Non-Shielded.590 [15.00].713 [18.10].350 [8.89] TYP..050 [1.27] TYP..035 [ 0.89] HOLES 8 REQ'D.050 [1.27].579 [14.70].453 [11.50].126 [3.20].128±.002 [ 3.25±0.05].250 [6.35].350 [8.89].450 [11.43].310 [7.88].350 [8.89].450 [11.43] Shielded RJE X [8.89].620 [15.76].734 [18.63] TYP..050 [1.27] TYP..050 [1.27].035 [ 0.89] HOLES 8 REQ'D.463 [11.75].128 [ 3.25].063 [ 1.60].250 [6.35].350 [8.89].117 [2.97].320 [8.12].135 [3.43].081 [2.06].450 [11.43].612 [15.54] Notes 25
27 THROUGH-HOLE RJE09 T D, S P TAB DOWN, STANDARD PROFILE RJE09 series is a group of products within a family of standard modular jacks designed to meet requirements for a variety of applications. Options with the RJE09 family include shielded & non-shielded, and RJ11 & RJ45. SPECIFICATIONS Material Insulator: Contacts: Shield: Electrical Contact resistance: Insulation resistance: Current Rating: Voltage Rating: DWV: High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin or gold flash plating on tail area Copper alloy; nickel plating overall 25 mω max. 500 MΩ min. at 500V DC for 2 mins max. 1.5 Amps per contact 125 Volts AC 1000 VAC, 60 Hz. 1 min. Mechanical Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 260 C for 5 to 8 secs max. Operating Temperature: -40 C to + 70 C UL File #: E ORDERING INFORMATION RJE09 - X X X - X X X 0 Number of Ports 1-1 Port 2-2 Ports 4-4 Ports 6-6 Ports 8-8 Ports Number of Positions 6-6 Positions 8-8 Positions A - 10 Positions Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts A - 10 Contacts Modifier 0 - Standard product Panel Stop Options 1 - Without panel stop 2 - With panel stop Contact Plating 1-6µ gold plating 2-15µ gold plating 3-30µ gold plating 4-50µ gold plating Shield Options 0 - No shield 1 - Standard shield, no tabs 5 - Shield with top and side tabs Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. Click to Return to Table of Contents 26
28 THROUGH-HOLE RJE09 T D, S P Single Port Non-Shielded.600 [15.25].810 [20.57].035±.002 [ 0.89±0.05] HOLES 10 REQ'D RJE09-1AA-0X10 TYP..050 [1.27] TYP..250 [6.35].524 [13.30].415 [10.55].135 [3.44].128±.002 [ 3.25±0.05].450 [11.43] Shielded RJE X [16.00].031 [0.80].089 [2.25].104 [2.65] SEE DETAIL 'X' DETAIL X.122 [ 3.10].020 [0.50].148 [3.75].051 [1.30].130 [3.30].543 [13.80].146 [3.70].839 [21.30].120±.010 [ 3.25±0.05] CONTACT TAILS.063±.002 [ 1.60±0.05].050 [1.27].35 [8.89].612 [15.55].350 [8.89].035±.002 [ 0.90±0.05].120 [3.05].45 [11.43].120±.010 [3.05±0.25].425 [10.80].114 [2.90].047 [1.20].100±.008 [2.54±0.20].350±.008 [8.89±0.20].126±.002 [ 3.20±0.05].450 [11.43] Shielded RJE X [15.88].837 [21.27].050 [1.27].050 [1.27].035±.002 [ 0.89±0.05].535 [13.60].126 [3.20] [6.35] [8.89].120 [3.05].450 [11.43].429 [10.89] TIN DIPPED ZONE.062±.002 [ 1.57±0.05].450 [11.43].610 [15.49].128±.002 [ 3.25±0.05] 27
29 THROUGH-HOLE RJE09 T D, S P Multi Port RJE X10 Non-Shielded [30.48].550 [13.97].810 [20.57].535 [13.59].415 [10.54].135 [3.44].050 [1.27] TYP..050 [1.27] TYP..035±.002 [ 0.89±0.05] HOLES 16 REQ'D.350 [8.89].350 [8.89] TYP..550 [13.97] [25.40].128±.002 [ 3.25±0.05] Shielded RJE X [114.94].837 [21.27].543 [13.80] [109.22].429 [10.89].126 [3.20] [54.61].350 [8.89] TYP. TYP..050 [1.27] TYP..050 [1.27].063±.002 [ 1.60±0.05] HOLES 3 REQ'D.035±.002 [ 0.90±0.05] HOLES 64 REQ'D.050 [1.27].250 [6.35].145 [3.68].108 [2.73].550 [13.97] TYP [109.22] [114.67].128±.002 [ 3.25±0.05] HOLES 3 REQ'D 28
30 THROUGH-HOLE RJULE T D, R, L P TAB DOWN, RECESSED, LOW PROFILE RJULE is a series of single port RJ45 modular jacks designed for slim profile applications. With a profile height of less than 10 millimeters, this connector is perfect where vertical space is limited. Standard and rear mount shield options for superior EMI performance makes this part ideal for LAN and router applications. SPECIFICATIONS Material Housing: High temp. thermoplastic; Flammability rating UL 94V-0; RoHS compliant Contacts: Phosphor bronze Plating: Gold plated on mating surfaces over 50µ (1.27 microns) min. nickel under plate; 100µ (2.54 microns) min. matte tin on contact tails Shield: Copper alloy; nickel plated Electrical Contact resistance: Insulation resistance: Current Rating: Voltage Rating: DWV: 20 mω max. 500 MΩ min. at 500V DC for 2 mins max. 1.5 Amps per contact 125 Volts AC 1000 VAC, 60 Hz. 1 min. Mechanical Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 260 C for 5 secs max. Operating Temperature: -55 C to + 85 C UL File: E *Note: Suitable for IR Reflow ORDERING INFORMATION RJULE - 4 X X X X - 01 X Number of Positions 4-8 Positions Contact Plating 0-1~3µ" gold plating 1-15µ" gold plating 2-30µ" gold plating 3-50µ" gold plating Housing Options 1 - Black 2 - Yellow 3 - Red Packaging Blank - Tray T - Tape & Reel Number of Ports 01-1 Port Shield Options 0 - No shield 1 - Standard shield 2 - Shield with side ground tabs designed to touch with mounting 3 - Shield with ground tab Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 29 Click to Return to Table of Contents
31 THROUGH-HOLE RJULE T D, R, L P Single Port RJULE-4X Non-Shielded.573 [14.54].695 [17.65].284 [7.20].175 [4.445].050 [1.27] Amphenol.427 [10.85].473 [12.00].035 [ 0.89] 8 PLACES R.046 [R1.18] R.064 [R1.63] 2 PLACES.450 [11.43].309 [7.85].137 [3.48].250 [6.35].087 [2.20].355 [9.00].450 [11.43].601 [15.25] Shielded with Side Ground Tabs RJULE-4X [3.058].586 [14.88].745 [18.91] MAX.705 [17.91] MIN.017 [0.42].715 [18.15].284 [7.20].175 [4.445].050 [1.27].035 [ 0.89] 8 PLACES Amphenol.447 [11.35].377 [9.58].137 [3.48].473 [12.00] R.046 [R1.18].062 [ 1.58] 2 PLACES R.064 [R1.63] 2 PLACES.593 [15.04].319 [8.10].120 [3.05] TIN DIPPED AREA.250 [6.35].087 [2.20].355 [9.00].450 [11.43].250 [6.35].601 [15.25] Standard Shield RJULE-4X [0.42] [15.04].715 [18.15].175 [4.445].050 [1.27].386 [9.80].586 [14.88].035±0.002 [ 0.89±0.05] 0.003[0.08] W R.046 [R1.18] Amphenol [12.65] [11.35].377 [9.58].137 [3.48].062±0.002 [ 1.58±0.05].120 [3.05].124 [3.14] R.064±0.002 [R1.63±0.05].128 [3.26].319 [8.10].197 [5.00].355 [9.00].070 [1.77].120 [3.05].250 [6.35].250 [6.35].450 [11.43] -W- 30
32 THROUGH-HOLE RJE73 T D, S P, L P TAB DOWN, SINGLE PORT, LOW PROFILE The RJE73 modular jack is a low profile RJ45 with LEDs and superior EMI shielding with a small footprint for space sensitive designs. This connector features built-in LEDs that provide link activity and network verification. This product is ideal for LAN applications such as adapter cards and routers. SPECIFICATIONS Material Insulator: Contacts: Shield: LED: Mechanical High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold plating options over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on solder tails Stainless steel with tin dipped tails Tin plating on LED tails Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Wave soldering peaked at 245 C for 8 to 10 secs max. Operating Temperature: -55 C to + 85 C UL File: E Electrical Contact resistance: 20 mω max. Insulation resistance: 500 MΩ min. at 500V DC for 2 mins max. Current Rating: 1.0 Amps per contact Voltage Rating: 125 Volts AC DWV: 1000 VAC, 60 Hz. 1 min. LED Forward DC Current: 20mA typical LED Forward Voltage: 1.9 Volts max. at 2mA (for single colours) 2.6 Volts max. at 2mA (for bicolours) LED Reverse Voltage: 5 Volts min. LED Light Intensity: 0.4 to 1.5 mcd min. at 2mA (for single colours) 0.5 mcd min. at 2mA (for bicolours) LED Wave Length: Yellow: 587 ± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA ORDERING INFORMATION RJE73-1 X X X X Number of Ports 1-1 Port Number of Positions 8-8 Positions Number of Contacts 8-8 Contacts Shield Options 0 - Shield without tabs 1 - Shield with side and top tabs LED Options Click to view page 82 for options Contact Plating 1-6µ gold plating 2-15µ gold plating 3-30µ gold plating 4-50µ gold plating Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 31 Click to Return to Table of Contents
33 THROUGH-HOLE RJE73 T D, S P, L P Single Port Shielded - Option 0 RJE XX0.552 [14.02].352 [8.94] ø.035±0.002 [ø0.9±0.05] HOLES 8 REQ'D.635 [16.14].594 [15.1].040 [1.02].281 [7.14].070 [1.78] ø.035±0.002 [ø1.1±0.05] HOLES 4 REQ'D.057 [1.45].142 [3.6] [13.5] [11.25].453 [11.5].171 [4.35] LED 2 LED [4.5] TIN DIP AREA.079 [2.0] ø.071±0.002 [ø1.8±0.05].452 [11.48].630 [16].079 [2].031 [0.8].236 [6] Shielded - Option 1 RJE XX1.552 [14.02].352 [8.94] ø.035±0.002 [ø0.9±0.05] HOLES 8 REQ'D.635 [16.14].594 [15.1].040 [1.02].281 [7.14].070 [1.78] ø.035±0.002 [ø1.1±0.05] HOLES 4 REQ'D.057 [1.45].142 [3.6] [13.5] [11.25].453 [11.5].171 [4.35] LED 2 LED [4.5] TIN DIP AREA.079 [2.0] ø.071±0.002 [ø1.8±0.05].452 [11.48].630 [16].079 [2].031 [0.8].236 [6] 32
34 SURFACE MOUNT RJSSE T U, L P TAB UP, WITH LIGHT PIPES The RJSSE series represents an expansion of Amphenol Canada s current RJHSE series connector. The RJSSE offers all the benefits of the RJHSE series in SMT with light pipes. Shielded and non-shielded versions are available with or without light pipes. SPECIFICATIONS Material Insulator: High temp. thermoplastic; Complies with UL 94V-0; Black Contacts: Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on soldering tail Shield: Copper alloy; nickel or matte tin plating Light Pipe: Optical polycarbonate; UL 94V-0 Mechanical Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: IR Reflow peaked at 260 C for 5 to 8 secs Operating Temperature: -55 C to + 85 C UL File #: E *Note: Light Pipes to be installed after soldering Electrical Contact resistance: Insulation resistance: Current Rating: Voltage Rating: DWV: 20 mω max. 500 MΩ min. at 500V DC for 2 mins max. 1.5 Amps per contact 125 Volts AC 1500 VAC, 60 Hz. 1 min. ORDERING INFORMATION RJSSE - X X X X - XX - X Version 5-8 Positions, 20µ gold plating 7-6 Positions, 20µ gold plating Shield Options 0 - No shield with hold-down bracket 3 - Shield with top tabs 5 - Shield with flattened bottom tab F - Shield without tabs and boardlock N - No shield, no hold-down bracket S - Shield with straight PCB Number of Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Packaging Blank - Tray T - Tape & Reel Number of Ports Blank - 1 Port 02-2 Ports 04-4 Ports Light Pipe Options 0 - Blocked 1 - With light pipe 2 - Without light pipe, not blocked Note: The light pipes are available to be purchased on their own. Part number: RJSSE Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. 33 Click to Return to Table of Contents
35 SURFACE MOUNT RJSSE T U, L P Single Port Non-Shielded.050 [1.27] TYP..022 [0.56] (8 PLCS) RJSSE-5080 SOLDER PADS.634±.010 [16.10±0.25].598±.010 [15.19±0.25].064 [1.63] CONNECTOR OUTLINE.130 [3.30] TYP. Amphenol.495±.010 [12.57±0.25].515±.010 [13.08±0.25].070±.010 [1.78±0.25].162±.010 [4.11±0.25].181±.010 [4.60±0.25] TERMINAL TAILS SEE NOTE [1.58] REF..100±.010 [2.54±0.25] TERMINAL TAILS SEE NOTE [2.95].075 [1.92].245 [6.22] TYP..330 [8.39].500 [12.70].564 [14.31].106±.002 [ 2.69±0.05] Standard Shield - With Top & Side Ground Tabs RJSSE [22.68].650 [16.51].803 [20.40].620 [15.75] INSERT LIGHT PIPE AFTER SOLDER REFLOW.065 [1.65] Amphenol.525 [13.34].055 [1.41] PCB.070 [1.78].170 [4.32].120 [3.05].181 [4.60].100[2.54].088 [2.24] MAX..027 [0.70] FOR REFERENCE.429 [10.90].050 [1.27] TYP..022 [0.56] (8 PLCS).064 [1.63].035 [0.90] CONNECTOR OUTLINE.125 [3.18] TYP..118 [3.00].075 [1.92].245 [6.22] TYP..330 [8.39].500 [12.70] SEE DETAIL 'A'.090 X.090 [2.29 X 2.29] LIGHT ENTRANCE AREAS OF LIGHT PIPES.564 [14.31].678 [17.22].106±.002 [ 2.69±0.05].047 [1.19] TYP..035 [0.89].047 [1.19] TYP. DETAIL 'A' (ENLARGED) SMT LED SOLDER PAG (SMT LED TO BE PROVIDED BY THE CUSTOMER) 34
36 SURFACE MOUNT RJSSE T U, L P Multi Port Non-Shielded [31.85].600 [15.24].881 [22.38].791 [20.09] THIS LIGHT PIPE IS INTENDED FOR POST REFLOW INSERTION INTO THE CONNECTOR ASSEMBLY. RJSSE Amphenol Amphenol.514 [13.06].055 [1.39].098 [2.50] TYP..070 [1.79].158 [4.01] TERMINAL TAILS.100 [2.55].620 [15.75] TYP..050 [1.27] TYP..022 [0.56] (32 PLCS).090 X.090 [2.29 X 2.29] LIGHT ENTRANCE AREAS OF LIGHT PIPES.064 [1.63].125 [3.18] TYP..118 [3.00].075 [1.92].245 [6.22] TYP..035 [0.90] CONNECTOR OUTLINE.950 [24.14] [28.45].429 [10.90] TYP..191 [4.85] SEE DETAIL 'A' (ON PREVIOUS PAGE).564 [14.31].678 [17.22].106±.002 [ 2.69±0.05] Multi Port Shielded [32.26].620 [15.75].893 [22.68] THIS LIGHT PIPE IS INTENDED FOR POST REFLOW INSERTION INTO THE CONNECTOR ASSEMBLY RJSSE [1.65] Amphenol Amphenol.525 [13.34].055 [1.40] TERMINAL TAILS.060 [1.51].088 [2.24] MAX..027 [0.70] FOR REFERENCE.620 [15.75] TYP..050 [1.27] TYP..022 [0.56] (32 PLCS).090 X.090 [2.29 X 2.29] LIGHT ENTRANCE AREAS OF LIGHT PIPES.429 [10.90] TYP..191 [4.85] [1.63].125 [3.18] TYP..118 [3.00].075 [1.92].245 [6.22] TYP..035 [0.90] CONNECTOR OUTLINE.950 [24.14] [28.45].564 [14.31].678 [17.22].106±.002 [ 2.69±0.05]
37 SURFACE MOUNT RJCSE T U, S P, LED TAB UP, STANDARD PROFILE, WITH LEDS The RJCSE is a right angle surface mount connector. Shielding is available for increased EMI performance as well as built-in LEDs for link activity and network verification. This product is ideal for LAN applications such as adapter cards and routers. SPECIFICATIONS Material Insulator: Contacts: Shield: LED: Mechanical High temp. thermoplastic; Complies with UL 94V-0; Black Phosphor bronze hard temper with gold thickness options (6µ, 15µ, 30µ, 50µ ) over 50µ min. nickel on contact mating area; 100µ min. matte tin plating on soldering tail Stainless steel with matte-tin plating Epoxy lens with tin plating on LED tails Insertion Force: 5 lbs max. Pull Retention Force: 20 lbs min. Durability: 750 mating & unmating cycles Redcommended Soldering Temperature: Suitable for IR reflow at 245 C for 10 secs max. Operating Temperature: -55 C to + 85 C UL File #: E CSA File #: LR Electrical Contact resistance: 20 mω max. Insulation resistance: 500 MΩ min. at 500V DC for 2 mins max. Current Rating: 1.5 Amps per contact Voltage Rating: 125 Volts AC DWV: 1000 VAC, 60 Hz. 1 min. LED Forward DC Current: 20mA typical LED Forward Voltage: 1.9 Volts max. at 2mA (for single colours) 2.6 Volts max. at 2mA (for bicolours) LED Reverse Voltage: 5 Volts min. LED Light Intensity: 0.4 to 1.5 mcd min. at 2mA (for single colours) 0.5 mcd min. at 2mA (for bicolours) LED Wave Length: Yellow: 587 ± 7 nm measured at 20mA Green: 565 ± 6 nm measured at 20mA Red: 625 ± 5 nm measured at 20mA ORDERING INFORMATION RJCSE - X X X X - 01 Version 3-8 Positions, 15µ gold plating 4-8 Positions, 30µ gold plating 5-8 Positions, 50µ gold plating Shield Options 0 - No shield 3 - Standard shield with panel tabs Number of Ports 01-1 Port LED Options Click to view page 82 for options Number of Contacts 2-2 Contacts 4-4 Contacts 6-6 Contacts 8-8 Contacts Didn t find what you were looking for? Please contact sales@amphenolcanada.com and let us know what you need. Click to Return to Table of Contents 36
SFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
More information3M Serial Attached SCSI (SAS) Connector Boardmount Compliant Pin and Surface Mount, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak allows blind mating or hot swap applications Capable
More informationCCM05 SD, MMC & minisd
For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.
More informationAmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
More information08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
More informationINNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
More informationSealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
More informationUSB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
More informationDirectory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
More informationPCI EXPRESS CARD EDGE G630E Series
GENERAL INTRODUCTION The PCI Express is a new serial I/O technology that is compatible with the current PCI software environment. It provides low-cost, scalable performance for the next generation of computing
More informationSMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
More informationJack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
More informationStandard Buccaneer - Ethernet
IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
NEW mm Pitch Double Rows Low Profile Board-to-Cable Connectors DF series Cable.4 Socket DF- **DS-C.8 DFF(G)- **DP-V Pin Header DF- **DS-C Socket Cable 6. PCB DFF **DP-H. Pin Header PCB Features. Contact
More information6000 Series Buccaneer
Robust, instant connections for harsh environments 6000 Series Buccaneer - circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available
More informationPRODUCT SPECIFICATION
ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,
More information6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
More information3M Pin Strip Header Single and Dual Row.100,.235 /.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header Single and Dual Row.100,.25 /.18 Mating Length, &, Solder Tails 929 Series Stackable Gold, Matte Sn, or -Lead plating options High Temperature (PCT) plastic for Wave or IR soldering
More informationSlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version
Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These
More informationSMS - Qikmate. Performance characteristics
- Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective
More informationIEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationHSD High Speed Data interconnection
HSD High Speed Data interconnection Fast, safe and robust Very high data bit rate up to 5 Gbit/s SSR smart strain relief enables unstressed solder joints Excellent resistance against cross-talk and RF-EMC
More information400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More informationSURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
More informationApplication Specification Dual In- Line Memory Module 114-13087 (DIMM) Sockets- DDR2 Solder Tail 05 APR 11 Rev D
Application Specification Dual In- Line Memory Module 114-13087 (DIMM) Sockets- DDR2 Solder Tail 05 APR 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
More informationMTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors
MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board
More informationGas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
More informationMICRO SFP+ CONNECTOR & CABLE ASSEMBLY
MICRO SFP+ CONNECTOR & CABLE ASSEMBLY micro SFP+ Connector and Cable Assembly TE Connectivity s (TE) micro SFP+ connector and cable assembly empower you to dream big when designing your communication system.
More informationQuick Reference Guide Euro Style Terminal Blocks
Quick Reference Guide Euro Style terminal block connectors feature various wire termination methods including rising cage clamp, wire protector, spring, IDC and crimp snap. The design of terminal block
More informationData Sheet. HLMP-Yxxx T-1 (3 mm) AlInGaP LED Lamps. Description. Features. Applications. Package Dimension
HLMP-Yxxx T-1 (3 mm) AlInGaP LED Lamps Data Sheet Description This family of T-1 lamps is widely used in general purpose indicator and back lighting applications. The optical design is balanced to yield
More informationAC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
More informationMicro-USB connectors meeting requirements of USB 2.0 Standard
NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high
More information3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
More informationAC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
More information400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
More informationFASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
More informationPC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
More informationMicro-USB connectors meeting requirements of USB 2.0 Standard
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSunridge MCB Series Miniature Coaxial Interconnect, 2.5mm or 2.0mm Mated Height
Sunridge MCB series coaxial product fulfills the rigorous requirements of high frequency data transmission in digital world. Constructed in supreme Teflon coax cable and advanced mechanical design, MCB
More informationTwo Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts
Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according
More informationSwitches SWITCHES SWITCHES
Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
More informationSTANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More informationAmphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
More information3M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series Stackable Tin Lead or gold plating available Solder stand-offs facilitate production wave soldering Board pin
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationFCI Connectors for Fine Pitch Mezzanine Solutions
FCI Connectors for Fine Pitch Mezzanine Solutions www.ttieurope.com CONAN 1.0 mm Connectors BERGSTAK 0.8 mm Connectors MEZZOSTAK 0.5 mm Connectors TTI, Inc. - Never Short on Solutions FCI FINE PITCH MEZZANINE
More informationStandard Buccaneer - USB
IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated
More informationDOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-SLD DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
More informationAMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
More informationAMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
More informationpicomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
More informationUSB 3.0 INTERNAL CONNECTOR AND CABLE SPECIFICATION
USB 3.0 INTERNAL CONNECTOR AND CABLE SPECIFICATION Revision 1.0 August 20, 2010 2007-2010 Intel Corporation All rights reserved. Legal Disclaimers THIS SPECIFICATION IS PROVIDED AS IS WITH NO WARRANTIES
More informationISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
More informationTechnical. Specifications. fischer Rugged Flash Drive. New. Rugged Solution for Safe Data Storage in Harsh Environment
fischer Rugged Flash Drive New Rugged Solution for Safe Data Storage in Harsh Environment Headquarters Fischer Connectors SA Ch. du Glapin 20 1162 Saint-Prex Switzerland Phone +41 21 800 95 95 mail@fischerconnectors.ch
More informationXG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
More informationSESD Series Ultra Low Capacitance Discrete TVS
SESD Series Ultra Low apacitance Discrete TVS RoHS Pb GREEN ELV Description The SESD Series Ultra Low apacitance Discrete TVS provides unidirectional and bidirectional ESD protection for the world s most
More informationSOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
More informationHLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-368, HLMP-3681 T 1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
More information01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
More informationKSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
More informationCategory 6 Solutions. 4. Category 6 Solutions. 09/08 400836IN TrueNet Structured Cabling. Introduction... 4.2. Cable... 4.3. Patch Panels... 4.
Category 6 Solutions Introduction... 4.2 Cable... 4.3 Patch Panels... 4.4 Modules... 4.6 Patch Cords... 4.12 Outlets... 4.16 Faceplates...4.18 4. 1 Search Category 6 Solutions Introduction ADC KRONE s
More informationNA Series. 2 POLES - 1 to 2 A (For Signal Switching) MINIATURE RELAY FTR-K1 SERIES
FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2 A (For Signal Switching) NA Series FEATURES Slim type relay for high density mounting Conforms to Telcordia specification and FCC Part 68 - Dielectric strength
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
More informationSMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
More informationI-PEX MHF4 Micro Coaxial Connector
PRODUCT SPECIFICATION I-PEX MHF4 Micro Coaxial Connector Plug P/N 20448-001R-81 Receptacle P/N 20449-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
More informationAZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
More informationReed V23100-V4 Relay. AXICOM Telecom-, Signal and RF Relays. AXICOM Telecom-, Signal and RF Relays. Reed V23100-V4 Relay
AXICOM AXICOM 108-98011 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationConnector System for Universal Serial Bus (USB)
Product Facts Plug and Play capability Hot pluggable, permits attaching or detaching peripherals without power down or reboot Single 4-position connector, polarized for proper orientation Complete family
More information.093 [2.36] Commercial Pin and Socket Connectors
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
More informationFigure 1 (end) Application Specification 114 13088 provides application requirements for MICTOR Right Angle Connectors for SMT PC Board Applications
This specification covers requirements for application of MICTOR Vertical Board to Board Plugs and Receptacles designed for pc boards. The connectors have an in row contact spacing on 0.64 [.025] centerlines.
More informationSILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
More informationCIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
More informationSELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
More information0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors
0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small
More informationDISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
More informationSurface Mount Schottky Barrier
FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive
More information1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and
More informationAnderson Power Products
Anderson Power Products Anderson Power Products APP s philosophy is to provide products and services within the trading markets of our customers. We currently serve our world-wide customer base from customer
More informationCOAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
More informationJNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410
The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a
More informationData Sheet. HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps. Description.
HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps Data Sheet Description These tinted diffused LED lamps are designed and optimized specifically
More informationUTS discrete wire sealing
Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105
More informationOutdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
More informationSC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
More informationCatalog C-004 Rev. F
Catalog C-004 Rev. F Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG. Introduction of new and unique connector
More informationSUPERSEDED REVISION. Gas Discharge Tubes GTCX28-XXXM-R20 Series. Features: Benefits: Applications
GTCX28-XXXM-R20 Series Raychem Circuit Protection 8mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and
More informationAgilent T-1 3 / 4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
Agilent T-1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-36, HLMP-361
More informationProduct Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760
More information33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
More information0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts
More information1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001
.5mm Height 222 Package Top View Full Color Chip LEDs Technical Data Sheet Part No.: LL-R55RGBC- Spec No.: R55 Rev No.: V.2 Date: Mar./6/26 Page: OF 2 Features: P-LCC-6 package. White package. Optical
More informationOperating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
More informationE Series. E Series. Category 6 and 5e. Features
E Series Category 6 and 5e CommScope, world leader in copper and fiber connectivity, offers the E Series product line as the ideal solution to all your infrastructure needs for safe and reliable data transmission.
More information