Aerospace Structures and Materials
|
|
- Herbert Williams
- 7 years ago
- Views:
Transcription
1 Aerospace Structures and Materials MSc Programme Dr. Ir. Otto Bergsma Delft University of Technology Challenge the future
2 Contents Our master track objectives The educational programme Our research programmes Facilities Themes for thesis projects Employers for our graduates Face book of staff members Points of contact No. 2/27
3 Aerospace Engineering tracks and profiles Aerospace Structures and Materials Flight Performance and Propulsion Aerodynamics and Wind Energy Control and Operations Space Flight Design and Production of Composite Structures Novel Aerospace Materials Structural Integrity Aerospace Structures and Computational Mechanics No. 3/27
4 Aerospace Structures & Materials Development, Design, Analysis and Verification of Lightweight Structures performance Sustainable: low weight is governing Economics: low weight is successful materials manufacturing design No. 4/27
5 The educational program No. 5/27
6 1 st year Aerospace Structures & Materials Core courses (common, 5 EC) Research Methodologies (plan your thesis work) Ethics for aerospace engineering Core courses (track specific, 14 EC) Composites: materials, structures and production processes Fatigue of structures and materials Designing materials with AE specific properties Advanced design and optimization of composite structures I Profile core courses (profile specific, EC) Electives (with profile coordinator) Literature Study (12 EC) or Master Orientation Project (6 EC) No. 6/27
7 2 nd year Aerospace Structures & Materials Internship (18 EC) Master Thesis Project (42 EC) During the second year, you will be engaged in hands-on research that is related to ongoing programmes in our department No. 7/27
8 Profiles in Aerospace Structures & Materials Novel Aerospace Materials Design and Production of Composite structures Structural Integrity Aerospace Structures and Computational Mechanics The profiles are a cooperative effort of the 4 research groups i.e. Design and Production of Composite Structures (profile 1) Novel Aerospace Materials (profile 2) Structural Integrity (profile 3) Aerospace Structures and Computational Mechanics (profile 4) No. 8/27
9 Profiles in Aerospace Structures & Materials Novel Aerospace Materials Design and Production of Composite structures Structural Integrity Aerospace Structures and Computational Mechanics Building knowledge and skills to become an innovator. Understanding structures Understanding materials Skilled in applying state-of-the-art design- & analysis tools Development of new concepts in materials and structures Objective: Realization of innovative light weight applications. No. 9/27
10 Keywords for our specialisations Safety Innovation Damage tolerance Multidisciplinary analysis Self healing materials performance design Verification & Validation Optimisation Advanced composites Fibre architecture manufacturing Prototyping Durability No. 10/27
11 Aerospace Structures & Materials research (1) Combination of functions Analysis of behaviour Optimisation performance materials design manufacturing No. 11/27
12 Aerospace Structures & Materials research (2) Variable stiffness via tow placement No. 12/27
13 Aerospace Structures & Materials research (3) Actuation Topology Design Create internal unstructured mesh Apply Simple Isotropic Material with Penalisation (SIMP) approach Combined skin stiffness/actuation topology optimisation possible No. 13/27
14 Aerospace Structures & Materials research (4) Reactive processing of thermoplastics CAPRO LACTAM ACTIVATOR C20 INITIATOR C1 No. 14/27
15 Aerospace Structures & Materials research (5) Care free structures Reduce maintenance burden No. 15/27
16 Aerospace Structures & Materials research (6) Damage Tolerance of Composite Structures No. 16/27
17 Facilities Structures and materials laboratory Wind tunnel facilities Compute cluster No. 17/27
18 Typical MSc thesis projects (1) Profile 1: Design and Production of Composite Structures Development of composite pressure vessels in general and composite fuselages in particular Development of composite related low cost manufacturing, joining techniques and composite materials alike. Development and optimization of advanced sport car bodies at a structure and system level. Development and optimization of novel, smart wind turbine blades and super yacht structures. Research of fatigue, failure mechanisms and impact behavior of polymeric composites. No. 18/27
19 Typical MSc thesis projects (2) Profile 2: Novel Aerospace Materials Developing new light sensitive polymeric actuators for morphing wing concepts Making and testing aluminium shape memory alloy composites for space applications Developing aramid fibres with cross-linkable units to improve compressive strength Developing self healing polymers and composites. Using ultra high pressures to make not-yet existing steel grades. Developing anticorrosive coatings based on self healing concepts No. 19/27
20 Typical MSc thesis projects (3) Profile 3: Structural Integrity Design and realise innovative solutions for the next aircraft programmes (in close cooperation with industry) Design, optimise and implement manufacturing processes (in close cooperation with industry) Develop methods and tools needed for research and design projects Design and realise innovative solutions for the next space vehicles (launchers, re-entry, sample and return, etc..) Design and realise innovative solutions for aircraft engines No. 20/27
21 Typical MSc thesis projects (4) Profile 4: Aerospace Structures and Computational Mechanics Design and Analysis of a CFRP End Cap for the A5ME Structural Feasibility of Winglets on the Hercules C130 Transport Aircraft Fibre Angle Orientation Optimisation for Variable Stiffness Laminates Stiffener Termination: Analysis of Composite Plates Under Localized Bending Moments - A theoretical study for the development of an analytical model Stability Analysis of Axially Loaded Imperfect Conical Shells with Cutouts No. 21/27
22 Aerospace Structures & Materials Where do our former students work? airbus, boeing, lockheed-martin, fokker stork rolls-royce, EADS, corus, shell, TNO, NLR, DLR ten cate, DSM, DOW, airborn, DTC, Dassault Typical in engineering and development but also ING, ABN-Amro consultant agencies No. 22/27
23 Students; a major and premium resource for innovations performance materials design manufacturing No. 23/27
24 Aerospace Structures & Materials Spin off (valorisation) Ten Cate Advanced Composites (W. van Dreumel) KvE (W. Kok en H. van Engelen) DTC (D. Manten) ALE (JJ. Koppert) Airborne (M. Brinkman & A. van Mourik) ActiFlow / Protension / Taniq No. 24/27
25 Aerospace Structures & Materials 3: Structural Integrity ± 150 Scientists PhD & Researchers 1: Design and Production of Composite Structures R. Benedictus Z. Gurdal Aerospace Structures & Materials A. Beukers S. van der Zwaag 4: Aerospace Structures & Computational Mechanics Coordinator Otto Bergsma 2: Novel Aerospace Materials No. 25/27
26 Points of contact Master Track Coordinator Otto Bergsma Profile Advisors Profile 1 Design and Production of Composites Structures : Otto Bergsma Profile 2 Novel Aerospace Materials : Santiago Garcia Espallargas Profile 3 Structural Integrity : Jos Sinke Profile 4 Aerospace Structures and Computational Mechanics : Jan Hol Websites: No. 26/27
27 Conclusion Our track is the place to be if you are aiming at becoming a master in the science of engineering. If you want to make things happen join this track! No. 27/27
Faculty of Aerospace Engineering
Delft University of Technology Dr. ir. Roeland De Breuker and Dr. Arvind Rao 20-3-2013 Delft University of Technology Challenge the future Delft University of Technology General Information Founded in
More informationMECHANICAL ENGINEERING
MECHANICAL ENGINEERING Prof.dr.ir. André de Boer Program director Mechanical Engineering Dr. Genie Stoffels Program coordinator Mechanical Engineering 19/11/2015 1 CONTENT MASTER MECHANICAL ENGINEERING
More informationThe company Premium AEROTEC
The company Premium AEROTEC was founded as an independent company on 1 January 2009 and is a wholly owned subsidiary of EADS N.V. EADS Augsburg plant and Airbus Nordenham and Varel plants have been integrated
More informationIMPLEMENTATION REGULATIONS MASTER S DEGREE PROGRAMME AEROSPACE ENGINEERING DELFT UNIVERSITY OF TECHNOLOGY
IMPLEMENTATION REGULATIONS MASTER S DEGREE PROGRAMME AEROSPACE ENGINEERING DELFT UNIVERSITY OF TECHNOLOGY 2015-2016 TABLE OF CONTENTS Section 1 Master s degree programme... 1 Article 1 The study load...
More informationCARBON/DYNEEMA INTRALAMINAR HYBRIDS: NEW STRATEGY TO INCREASE IMPACT RESISTANCE OR DECREASE MASS OF CARBON FIBER COMPOSITES
26 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES CARBON/DYNEEMA INTRALAMINAR HYBRIDS: NEW STRATEGY TO INCREASE IMPACT RESISTANCE OR DECREASE MASS OF CARBON FIBER COMPOSITES J. G. H. Bouwmeester*,
More informationControl & Operations. MSc Structure. Track. MSc Programme. Aerospace Engineering
Track Control & Operations MSc Programme Aerospace Engineering Faculty of Aerospace Engineering TU Delft is home to one of the leading academic programmes in aerospace engineering and technology in all
More informationAPPLICATION OF TOPOLOGY, SIZING AND SHAPE OPTIMIZATION METHODS TO OPTIMAL DESIGN OF AIRCRAFT COMPONENTS
APPLICATION OF TOPOLOGY, SIZING AND SHAPE OPTIMIZATION METHODS TO OPTIMAL DESIGN OF AIRCRAFT COMPONENTS Lars Krog, Alastair Tucker and Gerrit Rollema Airbus UK Ltd Advanced Numerical Simulations Department
More informationAerospace Research at Brno University of Technology - Czech Rep. and Cooperation with European Universities and Institutions
Aerospace Research at Brno University of Technology - Czech Rep. and Cooperation with European Universities and Institutions Prof. Ing. Antonín n PíšP íštěk, Ph.D. Head of Institute Institute of Aerospace
More informationAutomated Strength Analysis Processes for Aircraft Structures
Automated Strength Analysis Processes for Aircraft Structures Automatisierte Festigkeitsanalyseprozesse für Flugzeugstrukturen Univ.-Prof. Dr. Martin Schagerl Overview Structure Build-Up Structure Design
More informationProgramme Discussions Wissenschaftstag Braunschweig 2015 Laminarität für zukünftige Verkehrsflugzeuge
Programme Discussions Wissenschaftstag Braunschweig 2015 Kevin Nicholls, EIVW Prepared by Heinz Hansen TOP-LDA Leader, ETEA Presented by Bernhard Schlipf, ESCRWG Laminarität für zukünftige Verkehrsflugzeuge
More informationTHE COMPOSITE DISC - A NEW JOINT FOR HIGH POWER DRIVESHAFTS
THE COMPOSITE DISC - A NEW JOINT FOR HIGH POWER DRIVESHAFTS Dr Andrew Pollard Principal Engineer GKN Technology UK INTRODUCTION There is a wide choice of flexible couplings for power transmission applications,
More informationCLIQUEZ POUR MODIFIER LE STYLE DU TITRE
Thermoplastic and stabilized dry fiber with automated fiber placement Davy Leboucher, Ing. Dipl 1/28 I. Company Profile SUMMARY II. Current robotic fiber placement III. Thermosets and Aerospace Applications
More informationTAPAS. Arnt Offringa Director R&D Fokker Aerostructures Ypenburg, 12 juni 2013
TAPAS Arnt Offringa Director R&D Fokker Aerostructures Ypenburg, 12 juni 2013 Wat hebben zij gemeen? 2 Product of the Netherlands 3 focus op technologieën met groeipotentieel 4 Low weight producten door
More informationTesting of a new morphing trailing edge flap system on a novel outdoor rotating test rig
Downloaded from orbit.dtu.dk on: Jan 05, 2016 Testing of a new morphing trailing edge flap system on a novel outdoor rotating test rig Aagaard Madsen, Helge; Barlas, Athanasios; Løgstrup Andersen, Tom
More information3TU MSc in Sustainable Energy Technology. Creating the sustainable energy specialists of the future
3TU MSc in Sustainable Energy Technology Creating the sustainable energy specialists of the future The challenge of Sustainable Energy Technology The world is becoming acutely aware of the urgency of resolving
More informationComposite Design Fundamentals. David Richardson
Composite Design Fundamentals David Richardson Contents A review of the fundamental characteristics of composites Stiffness and Strength Anisotropic Role of fibre, matrix and interface Composite failure
More informationEXPERIMENTAL/NUMERICAL TECHNIQUES FOR AIRCRAFT FUSELAGE STRUCTURES CONTAINING DAMAGE
EXPERIMENTAL/NUMERICAL TECHNIQUES FOR AIRCRAFT FUSELAGE STRUCTURES CONTAINING DAMAGE Abstract Padraic E. O Donoghue, Jinsan Ju Dept. Civil Engineering National University of Ireland Galway, Ireland padraic.odonoghue@nuigalway.ie,
More informationAerospace Engineering
West Virginia University 1 Aerospace Engineering Aerospace Engineering Aerospace travel, space exploration, and flight of manned or unmanned vehicles continue to gain significance. Aerospace engineering
More informationAdvanced Systems & Equipment
Advanced Systems & Equipment Flotation Systems Utilising extensive experience gained from over 70 years of innovation, GKN Aerospace - Portsmouth is a leading supplier of inflatable recovery systems and
More informationNordiske Kompositdage 2008. Aalborg University 26-27. August 2008
Nordiske Kompositdage 2008 Aalborg University 26-27. August 2008 Department of Mechanical Engineering Aalborg University (www.me.aau.dk) Ole Thybo Thomsen Head of Department, Professor, Ph.D. ott@ime.aau.dk
More informationUniversity of Dayton Graduate School Aerospace Engineering
University of Dayton Graduate School The University of Dayton offers more than 50 disciplinary and cross-disciplinary advanced degree programs, making it easy for you to find a program to meet your needs.
More informationTsAGI EU Scientific Cooperation National Contact Point Aeronautics
CENTRAL AEROHUYDRODYNAMIC INSTITUTE NAMED AFTER PROF. N.E. ZHUKOVSKY TsAGI EU Scientific Cooperation National Contact Point Aeronautics Central Aerohydrodynamic Institute (TsAGI) named after prof. N.E.
More informationAdvanced aerospace materials: past, present and future
03 AVIATION AND THE With the Intergovernmental Panel on Climate Change (IPCC) reporting that up to 15 per cent of total greenhouse gas emissions could be caused by aviation by 2050, it is important to
More informationMEng Aeronautical Engineering (H401)
Programme Specification (Undergraduate) MEng Aeronautical Engineering (H401) This document provides a definitive record of the main features of the programme and the learning outcomes that a typical student
More informationHigh-Speed Demonstration of Natural Laminar Flow Wing & Load Control for Future Regional Aircraft through innovative Wind Tunnel Model
High-Speed Demonstration of Natural Laminar Flow Wing & Load Control for Future Regional Aircraft through innovative Wind Tunnel Model Project organization The project tackles the CfP JTI-CS-2012-1-GRA-02-019
More informationMaster of Science in Materials Engineering
Master of Science in Materials Engineering Faculty of Engineering Science KU Leuven. Inspiring the outstanding. Department of Materials Engineering The Department of Materials Engineering (MTM) leverages
More informationHerausforderungen an CFK-Primärstrukturen für Verkehrsflugzeuge der nächsten Generation Wie lohnt sich der Einsatz von CFK?
www.dlr.de Folie 1 Herausforderungen an CFK-Primärstrukturen für Verkehrsflugzeuge der nächsten Generation Wie lohnt sich der Einsatz von CFK? www.dlr.de Chart 2 First Generation Composite Airframe An
More informationAcrosoma 3D panels for road and wind
Acrosoma 3D panels for road and wind ir ir Jan Jan Verhaeghe, CEO CEO Composittrailer Composittrailer Nordic Nordic Composite Days Days 1 Aalborg, August 25th 2008 Aalborg, August 25th 2008 Structural
More informationBroad Base. Best Solutions. SIGRAPREG Prepregs Made from Carbon, Glass, and Aramid Fibers
Broad Base. Best Solutions. COMPOSITEs Fibers and MATERIALS SIGRAPREG Prepregs Made from Carbon, Glass, and Aramid Fibers 2 Carbon fibers and composites made by SGL Group. Q Comprehensive product range
More informationApplications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT)
I Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT) Table of Content 1 Introduction...1 2 Improved Properties...1 3 Potential Applications...1 3.1 Current / short-term applications...3
More informationSolid and Fluid Mechanics 26 maart 2013
Solid and Fluid Mechanics 26 maart 2013 René Delfos - Coordinator Solids & Fluids r.delfos@tudelft.nl (015-27)-82963 + Short Introduction + Engineering Mechanics (ED & SOCM) (Hans Goossen) + Fluid Mechanics
More informationCarbon Fibre in Mass Automotive Applications Challenges and Drivers for composites
Carbon Fibre in Mass Automotive Applications Challenges and Drivers for composites Robert Crow CEng MIMM Materials Innovation Manager Franco-British Symposium on Composite Materials 28 th April Agenda
More informationSmart Fixed Wing Aircraft Integrated Technology Demonstrator (SFWA-ITD): New Wing Concepts
Aerodays 2011 conference CleanSky Scenarios for 2020: Conceptual Aircraft Smart Fixed Wing Aircraft Integrated Technology Demonstrator (SFWA-ITD): New Wing Concepts Madrid, 30. March 01. April 2010 J.
More informationdi Milano the PhD Bovisa
PhD School of the Politecnico di Milano Regulations of the PhD Programme in Aerospace Engineeringg Cycle XX XX Location: Milano Bovisa 1 Proposal of a PhD Programme (PhD) administered at the Politecnico
More informationMatrix system with enhanced mechanical performance: new infusion system for wind energy applications enables lighter, longer, lower cost rotor blades
White Paper Matrix system with enhanced mechanical performance: new infusion system for wind energy applications enables lighter, longer, lower cost rotor blades Malte Wichmann Momentive Specialty Chemicals
More informationAutomated Tape Layer Processing for Composite Components
Automated Tape Layer Processing for Composite Components Presented by: Carroll Grant Aerospace Composites Consulting Sandy, Utah 5 th 5 th Annual SPE Automotive Composites Conference Troy, Michigan 12
More informationINTRODUCTION OF SZÉCHENYI ISTVÁN UNIVERSITY
International Week on Practice Oriented Higher Education (IW-PROHE) 2-5 February 2015 INTRODUCTION OF SZÉCHENYI ISTVÁN UNIVERSITY Barna Hanula Dean of AUDI Hungaria Faculty of Automotive Engineering Topics
More informationI M HEALING SKIN WITH LIGHT
GRADUATE SCHOOL 2015-2016 I M HEALING SKIN WITH LIGHT Graduate program LIFE SCIENCES AND ENGINEERING * This major is formally part of the Computer Science & Engineering Bachelor program Graduate program
More informationResearch and Education in the Field of Wind Energy at the Technical University of Denmark
Research and Education in the Field of Wind Energy at the Technical University of Denmark Jens Nørkær Sørensen Head of Section of Fluid Mechanics DTU Wind Energy DTU Wind Energy The department, which was
More informationAdditive manufacturing met metaal Trends & ontwikkelingen en de kansen voor de maakindustrie
Additive manufacturing met metaal Trends & ontwikkelingen en de kansen voor de maakindustrie Bert Thuis bert.thuis@nlr.nl Nationaal Lucht- en Ruimtevaartlaboratorium National Aerospace Laboratory NLR Overview
More informationComposite Materials Overview for Engineers
Composite Materials Overview for Engineers An Open, Online Course Co-Developed by Academia and Industry ASEE CIEC 2014, Savannah GA Meet the Team The Boeing Company Barry McPherson Education Programs Leader
More informationFunction-integrated Lightweight Design Structures for Next Generation Ground Vehicles 09-10.10.2014, IEA Workshop
Function-integrated Lightweight Design Structures for Next Generation Ground Vehicles 09-10.10.2014, IEA Workshop Dipl.-Ing. Gundolf Kopp Dipl.-Ing. Andreas Höfer Dipl.-Ing. Diego Schierle Prof. Dr. -Ing.
More information3TU Master of Science in Systems and Control. An essential engineering qualification for future decades
3TU Master of Science in Systems and Control An essential engineering qualification for future decades The challenge of Systems and Control As the complexity and importance of our many industrial structures
More informationROHACELL Triple F. Complex shaped PMI Foam Cores for highly efficient FRP Composite
Complex shaped PMI Foam Cores for highly efficient FRP Composite ROHACELL Triple F Sandwich Fabrication for low to - A Novel Particle Foam high volume applications SAMPE tesdr. Kay Brazil Conference 2015
More informationMASTER OF ENGINEERING Mechanical Engineering Program
MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.
More informationDesign rules for bridges in Eurocode 3
Design rules for bridges in Eurocode 3 Gerhard Sedlacek Christian üller Survey of the Eurocodes EN 1991 EN 1990 Eurocode: Basis of Design EN 1992 to EN 1996 Eurocode 1: Actions on Structures Eurocode 2:
More informationL I S A - Lightweight Structural Applications Based on Metallic and Organic foams
L I S A - Lightweight Structural Applications Based on Metallic and Organic foams Project duration 2/2002-1/2005 European Commission, Fifth Framework Program GROWTH ; G5RD-CT-2001-00484 9 partners 1 LISA
More informationMaster of Science Aerospace Engineering
NTU Full Logo printing on uncoated stock: CMYK 0C 100M 90Y 0K 100C 68M 7Y 28K Master of Science Aerospace Engineering AIRBUS 2006 / Photo by S. RAMADIER At A Glance JOINT DEGREE BY Technische Universität
More informationDevelopments and Challenges for Aluminum A Boeing Perspective
MATERIALS FORUM VOLUME 28 - Published 2004 Edited by J.F. Nie, A.J. Morton and B.C. Muddle Institute of Materials Engineering Australasia Ltd 24 Developments and Challenges for Aluminum A Boeing Perspective
More informationIntroduction BAM and Van Oord GBF - Concrete Centre Conference, December 2012
Introduction BAM and Van Oord have teamed up to Design, Manufacture and install reinforced concrete gravity base foundations (GBFs) for the offshore wind industry. The concept for the GBF has been developed
More informationPhD Program in Aerospace Engineering
PhD Program in Aerospace Engineering INTEGRATED PROJECT IN AEROSPACE VEHICLES AND SYSTEMS 1. Summary of the motivation for the Project Aerospace Engineering is a synthesis of advanced technologies: aerodynamics,
More informationQUALIFICATION OF MATERIALS AND BLADES FOR WIND TURBINES. Jakob Wedel-Heinen and Josef Kryger Tadich
Proceedings of the 27 th Risø International Symposium on Materials Science: Polymer Composite Materials for Wind Power Turbines Editors: H. Lilholt, B. Madsen, T.L. Andersen, L.P. Mikkelsen, A. Thygesen
More informationTechnology and Innovation for the Future of Composites Manufacturing
Technology and Innovation for the Future of Composites Manufacturing Ben Davies Sophie Wendes 15 th July 2014 Overview of Presentation Introduction to Sophie Wendes and Ben Davies GKN Overview Overview
More informationAUTOMOTIVE ENGINEERING UNIVERSITY OF LIEGE
AUTOMOTIVE ENGINEERING UNIVERSITY OF LIEGE Pierre DUYSINX University of Liège Automotive Engineering OUTLINE INTRODUCTION University of Liège Aerospace & Mechanics Department SIMULATION & OPTIMIZATION
More informationdiverse inspiring renowned nnovative excellence Faculty of Engineering Aerospace Engineering
diverse inspiring renowned nnovative excellence Faculty of Engineering Introduction Explore Socialise Why study? If you enjoy problem solving, excel in maths and physics and have a strong interest in aircraft,
More informationNumerical simulation of maneuvering combat aircraft
Numerical simulation of maneuvering combat aircraft Andreas Schütte DLR - German Aerospace Center Institute of Aerodynamics and Flow Technology Oct. 14 th 2005, Stuttgart Folie 1 > HLRS 2005 > A. Schütte
More informationCollaborative engineering environments Two examples of process improvement
Collaborative engineering environments Two examples of process improvement J.B.R.M. Spee, D.J.A. Bijwaard and D.J. Laan* DWLRQDDO /XFKW HQ 5XLPWHYDDUWODERUDWRULXP DWLRQDO $HURVSDFH /DERUDWRU\ /5 /573 &ROODERUDWLYHHQJLQHHULQJHQYLURQPHQWV
More informationBalancing Manufacturability and Optimal Structural Performance for Laminate Composites through a Genetic Algorithm
Balancing Manufacturability and Optimal Structural Performance for Laminate Composites through a Genetic Algorithm Mike Stephens Senior Composites Stress Engineer, Airbus UK Composite Research, Golf Course
More informationThe Fundamental Principles of Composite Material Stiffness Predictions. David Richardson
The Fundamental Principles of Composite Material Stiffness Predictions David Richardson Contents Description of example material for analysis Prediction of Stiffness using Rule of Mixtures (ROM) ROM with
More informationNew Perspectives in Aeronautics Research for the UK The Aerospace Technology Institute. Dr Simon Weeks CTO, ATI
New Perspectives in Aeronautics Research for the UK The Aerospace Technology Institute Dr Simon Weeks CTO, ATI The Aerospace Technology Institute Overview An independent institute established as a collaboration
More informationTHE DANIEL GUGGENHEIM SCHOOL OF AEROSPACE ENGINEERING
THE DANIEL GUGGENHEIM SCHOOL OF AEROSPACE ENGINEERING COLLEGE OF ENGINEERING AEROSPACE ENGI- ING Scott Horowitz, MS AE 1979, PhD AE 1982, enjoyed a successful career as a NASA astronaut, flying in four
More informationUndergraduate Aerospace Engineering
Undergraduate Aerospace Engineering Faculty of Engineering When I started my job, I was mostly involved in testing our Formula One car. A few months later, after a lot of learning, I started contributing
More informationCurrent Challenges in the Aerospace Industry. Martin Wright, CEO, NWAA
Current Challenges in the Aerospace Industry Martin Wright, CEO, NWAA Northwest Aerospace Alliance Founded 1992 as a not for profit company Full time staff, 28 Associates, 5 Part time OEM programme support
More informationAerospace Systems. Industry Spotlight
4 Aerospace Systems Engineering simulation is an integral part of the development process for critical components and major subsystems on today s aircraft from nose to tail. By Simon Pereira Senior Application
More informationMSc AND PhD TWENTE GRADUATE SCHOOL SCIENCE BASED ENGINEERING GRADUATE SCHOOL
MSc AND PhD TWENTE GRADUATE SCHOOL SCIENCE BASED ENGINEERING GRADUATE SCHOOL DISCLAIMER Although this brochure was compiled with the utmost care, no rights can be derived from its contents. TWENTE GRADUATE
More informationMechanical Engineering Technologies
Technologies 1 Technologies Graduates of the Technology program are prepared to design mechanical systems, operate CAD systems, manage design projects, and perform product testing. Examples of graduate
More informationAn application of neural network for Structural Health Monitoring of an adaptive wing with an
Home Search Collections Journals About Contact us My IOPscience An application of neural network for Structural Health Monitoring of an adaptive wing with an array of FBG sensors This content has been
More informationAerospace Manufacturing Technology Challenges
Aerospace Manufacturing Technology Challenges Mark SUMMERS, Head of Technology; Manufacturing, Materials & Structures Advanced Engineering UK 2015, 5-Nov-15, NEC, Birmingham UK Our mission through 2.1bn
More informationACMC/SAMPE Conference on Marine Composites Plymouth, 11-12 September 2003 (ISBN 1-870918-02-9) USE OF COMPOSITES IN THE VISBY CLASS STEALTH CORVETTE
USE OF COMPOSITES IN THE VISBY CLASS STEALTH CORVETTE Fredrik Lindblom FMV / Swedish Defence Materiel Administration Centre of Expertise, Naval Vessels Technology, SE-115 88 Stockholm Sweden ABSTRACT The
More informationDesign and Sizing of Structure for Safe Service Life under Fatigue Loading. Fatigue from a structural mechanics point of view
Design and Sizing of Structure for Safe Service Life under Fatigue Loading Fatigue from a structural mechanics point of view TMMI09 Vibrations and Fatigue, December 15, 2015 Life Design Principles Static
More informationSYSTEMS, CONTROL AND MECHATRONICS
2015 Master s programme SYSTEMS, CONTROL AND MECHATRONICS INTRODUCTION Technical, be they small consumer or medical devices or large production processes, increasingly employ electronics and computers
More informationSimulation Analysis Optimisation. Computer Aided Engineering
Simulation Analysis Optimisation Computer Aided Engineering Computer Aided Engineering Simulation Analysis Optimisation Simulation Analysis Optimisation Increasing demands on new products in terms of functionality,
More informationHolland High Tech. High Tech Solutions for Global Challenges. High Tech Systems & Materials sector in the Netherlands. Name: Date:
Holland High Tech High Tech Solutions for Global Challenges High Tech Systems & Materials sector in the Netherlands Name: Date: A Vibrant and Competitive Ecosystem That invented Bluetooth, WiFi, the CD
More informationProvided by TryEngineering - www.tryengineering.org
Provided by TryEngineering - Lesson Focus Lesson focuses on wind tunnel tests that engineers in many industries use to when developing products such as airplanes, cars, and even buildings. Teams of students
More informationKidričeva cesta 55a 4000 Kranj, Slovenia
Kidričeva cesta 55a 4000 Kranj, Slovenia UNIVERSITY OF MARIBOR FACULTY OF ORGANIZATIONAL SCIENCES Kidričeva cesta 55 a, 4000 Kranj Phone: 04 23 74 200, fax: 04 23 74 299 Contact: Romana Lesjak (master's
More informationPhD School of the Politecnico di Milano
PhD School of the Politecnico di Milano Regulations of the PhD Programme in Aerospace Engineering Cycle XXXI Location: Milano Bovisa 1 1. General Information PhD School of the Politecnico di Milano PhD
More informationThe Masters in Applied & Environmental Geoscience AEG
Faculty of Science Department of Geosciences The Masters in Applied & Environmental Geoscience AEG What is Applied & Environmental Geoscience? Applied & Environmental Geoscience (AEG) is a research oriented
More informationUniversity of Dayton Graduate School Mechanical Engineering
University of Dayton Graduate School The University of Dayton offers more than 50 disciplinary and cross-disciplinary advanced degree programs, making it easy for you to find a program to meet your needs.
More informationExperimental validation of the 3D numerical model for an adaptive laminar wing with flexible extrados
18 th International Conference of Adaptive Structures and Technologies October 3 rd, 4 th, 5 th, 2007 Ottawa, Ontario, Canada Experimental validation of the 3D numerical model for an adaptive laminar wing
More informationComposite Materials. Capability Statement
Composite Materials Capability Statement 2 Arup is an independent consultancy employing over 11,000 professional staff in more than 35 countries around the world. Introduction Arup is an independent firm
More informationComputational Fluid Dynamics
Aerodynamics Computational Fluid Dynamics Industrial Use of High Fidelity Numerical Simulation of Flow about Aircraft Presented by Dr. Klaus Becker / Aerodynamic Strategies Contents Aerodynamic Vision
More informationEngineering & Technology High School. Course Description
& Technology High School The Following Courses will be offered for the High School program under & Technology for the year 2013 & 14 year. These courses are the First Phase for the development of new Pathways,
More informationJourney of a Lifetime
3rd of March 2015 Journey of a Lifetime the cycle of aircraft development VISION introduction Journey of a Lifetime The cycle of aircraft development Every year 3 billion people travel around the globe
More informationAdvanced Master s Programme in Welding Engineering
Advanced Master s Programme in Welding Engineering Sint-Katelijne-Waver Faculty of Engineering Technology KU Leuven. Inspiring the outstanding. Advanced Master s Programme in Welding Engineering The Advanced
More informationPROGRAMME SPECIFICATION POSTGRADUATE PROGRAMME
PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMME KEY FACTS Programme name Advanced Computer Science Award MSc School Mathematics, Computer Science and Engineering Department or equivalent Department of Computing
More informationEnhanced Project Management Tool for Complex Systems
Enhanced Project Management Tool for Complex Systems This invention is a system for managing a project that includes multiple tasks and workers, with monthly task schedule, and budget reports. Practical
More information8 EXTRA LIGHT GRC SANDWICH ELEMENTS FOR ROOFING IN INDUSTRIAL BUILDINGS
8 EXTRA LIGHT GRC SANDWICH ELEMENTS FOR ROOFING IN INDUSTRIAL BUILDINGS MARICA DELLA BELLA and DIEGO CIAN Precompressi Centro Nord S.p.A., Italy SUMMARY: Secondary roofing elements, complementary to the
More informationwe do. Aerospace Engineering Master Engineering fhwn University of Applied Sciences Wiener Neustadt www.fhwn.ac.at
Aerospace Engineering Master fhwn we do. Engineering www.fhwn.ac.at University of Applied Sciences Wiener Neustadt Business. Engineering. Health. Security. Sport Aerospace Engineering beyond limits. Short
More informationIn-flight Evaluation of Avionic Systems
In-flight Evaluation of Avionic Systems Henk Jentink National Aerospace Laboratory NLR, Flight Test Seminar, 6 April 2011, Hamburg Nationaal Lucht- en Ruimtevaartlaboratorium National Aerospace Laboratory
More informationDesign Optimization Case Study: Car Structures. Mark Carruth
Design Optimization Case Study: Car Structures Mark Carruth 1. INTRODUCTION Crash structures are used in transport vehicles such as cars and trains to protect the occupants and reduce the risk of serious
More informationCollaborative Design at DLR in Distributed and Co-Located Environments
www.dlr.de Slide 1 > Collaborative Design at DLR in Distributed and Co-Located Environments > A. Bachmann > 24.06.2013 Collaborative Design at DLR in Distributed and Co-Located Environments Arne Bachmann,
More informationIMPLEMENTATION REGULATIONS BACHELOR S DEGREE PROGRAMME AEROSPACE ENGINEERING DELFT UNIVERSITY OF TECHNOLOGY
IMPLEMENTATION REGULATIONS BACHELOR S DEGREE PROGRAMME AEROSPACE ENGINEERING DELFT UNIVERSITY OF TECHNOLOGY 2014-2015 TABLE OF CONTENTS Section 1 Bachelor s degree programme... 1 Article 1 The study load...
More informationstudy in IRELAND Bachelor of Technology in Aircraft Maintenance and Operations www.ul.ie Partial scholarships available!
study in IRELAND Bachelor of Technology in Aircraft Maintenance and Operations www.ul.ie Partial scholarships available! Shannon Aerospace is a Lufthansa Technik AG Company A Unique Partnership This programme
More informationFaculty of Applied Sciences. Bachelor s degree programme. Nanobiology. Integrating Physics with Biomedicine
Faculty of Applied Sciences Bachelor s degree programme Nanobiology Integrating Physics with Biomedicine We have just begun to explore life on this level Nanobiology uses the language of maths in the context
More informationHow To Become A Sustainable Energy Engineer
Sustainable Energy Technology Theo van der Meer Master Sustainable Energy Technology TU Eindhoven officially started in June 2005 with an approved master program. In April 2006 upgraded to a national master
More informationSCHOOL OF ENGINEERING BACHELOR S DEGREE IN AEROSPACE ENGINEERING
SCHOOL OF ENGINEERING BACHELOR S DEGREE IN WELCOME TO UNIVERSIDAD EUROPEA DE MADRID Welcome to Universidad Europea de Madrid, a young, dynamic institution, fully prepared to meet the challenges of today
More informationMaster of Science in Engineering: Mechanical Engineering
Master of Science in Engineering: Mechanical Engineering Faculty of Engineering Science KU Leuven. Inspiring the outstanding. Master of Science in Engineering: Mechanical Engineering Mechanical engineering
More informationPLASTIC/METAL HYBRID TECHNOLOGY. Innovative Design Solutions for Structural Performance with Weight and Cost Reduction
PLASTIC/METAL HYBRID TECHNOLOGY Innovative Design Solutions for Structural Performance with Weight and Cost Reduction LANXESS Corporation Unites Plastic and Metal to Help Manufacturers Create Products
More information