SURGELOGIC Surge Protective Device Transient Voltage Surge Suppressor (TVSS) XGA, XT, XF, and XP Series
|
|
|
- Esmond Hodges
- 7 years ago
- Views:
Transcription
1 SURGELOGI Surge Protective Device Transient Voltage Surge Suppressor () XG, XT, XF, and XP Series lass 1310 OTETS Schneider Electric rands Description Page Product Descriptions pplication Information Selection and Specifications Wiring Diagrams Dimensions and Weights
2 Product Description XG Series DESRIPTIO XG SERIES The SURGELOGI XG series surge protective device is a modular parallel transient voltage surge suppressor (). The XG device is a multi-stage suppression circuit consisting of field-proven, fast-acting 40 mm metal oxide varistors (MOVs). surge suppression path is provided for each mode, line-to-neutral (L ), line-to-line (L L), line-to-ground (L G), and neutral-to-ground ( G). Each surge suppression mode is individually fused and uses circuitry with thermal cutouts to isolate the and ensure shutdown in the event of MOV damage during severe overvoltages, even when operated on high-fault current power systems. The suppression elements are encapsulated in a UL Listed thermosetting epoxy material, another performance element that provides additional protection. filter network provides wave shape smoothing and a high level of EMI/RFI noise attenuation. On-line diagnostics continuously monitor the device status, and LEDs signal a reduction in surge capacity or loss of a suppression circuit. n audible alarm with test and silence features is included in the standard diagnostic package. Design Features External mounting next to panelboards, switchboards, switchgear, or motor control centers (Ms) Individually fused suppression modes Thermal cutout opper bus bar construction Solid state bi-directional Front panel alarm with test/silence switch LED indicators indicate loss of protection, or fully operational circuit High-energy parallel design for category,, and 3 applications tracking filter with EMI/RFI filtering up to -50 d from 100 khz to 100 MHz Performance Features Surge apacity L L G G 120 k / phase 60 k 60 k 120 k 160 k / phase 80 k 80 k 120 k 240 k / phase 120 k 120 k 1 20 k XG Series Voltage Specifications UL Suppression Voltage Rating (SVR) atalog umber Service Voltage L L G G L L MOV TVS1XG /240 V, 1-phase 400 V 400 V 400 V 800 V 150 V TVS2XG Y/120 V, 3-phase, 4-wire 400 V 400 V 400 V 800 V 150 V TVS3XG /120 V, 3-phase, high-leg delta 800/400 V 400 V 400 V 1500/800 V 275/150 V TVS4XG Y/277 V, 3-phase, 4-wire 800 V 800 V 800 V 1600 V 320 V TVS8XG Y/347 V, 3-phase, 4-wire 1200 V 1200 V 1200 V 2000 V 420 V MOV = Maximum ontinuous Operating Voltage Schneider Electric ll Rights Reserved 07/02
3 Product Description XT Series DESRIPTIO XT SERIES The SURGELOGI XT series surge protective device is a modular parallel transient voltage surge suppressor. The XT device is a multi-stage suppression circuit consisting of field-proven, fast-acting 40 mm metal oxide varistors (MOVs). surge suppression path is provided for each mode, line-to-neutral (L ), line-to-line (L L), line-to-ground (L G), and neutral-to-ground ( G). Each surge suppression mode is individually fused and uses circuitry with thermal cutouts to isolate the and ensure shutdown in the event of MOV damage during severe overvoltages, even when operated on high-fault current power systems. The suppression elements are encapsulated in a UL Listed thermosetting epoxy material, another performance element that provides additional protection. filter network provides wave shape smoothing and a high level of EMI/RFI noise attenuation. On-line diagnostics continuously monitor the device status, and LEDs signal a reduction in surge capacity or loss of a suppression circuit. n audible alarm with test and silence features is included in the standard diagnostic package. Design Features External mounting next to panelboards, switchboards, switchgear, or motor control centers (Ms) Individually fused suppression modes Thermal cutout Solid state bi-directional Front panel alarm with test/silence switch LED indicators indicate loss of protection or fully operational circuit High-energy parallel design for category,, and 3 applications tracking filter with EMI/RFI filtering up to -50 d from 100 khz to 100 MHz Performance Features Surge apacity L L G G 120 k / phase 80 k 40 k 120 k 160 k / phase 80 k 80 k 120 k 240 k / phase 120 k 120 k 120 k XT Series Voltage Specifications UL Suppression Voltage Rating (SVR) atalog umber Service Voltage L L G G L L MOV TVS1XT /240 V, 1-phase 400 V 400 V 400 V 800 V 150 V TVS2XT... TVS3XT... TVS4XT... TVS8XT Y/120 V, 3-phase, 4-wire 240/120 V, 3-phase, high-leg delta 480Y/277 V, 3-phase, 4-wire 600Y/347 V, 3-phase, 4-wire MOV = Maximum ontinuous Operating Voltage 400 V 400 V 400 V 800 V 150 V 800/400 V 400 V 400 V 1500/800 V 275/150 V 800 V 800 V 800 V 1600 V 320 V 1200 V 1200 V 1200 V 2000 V 420 V 07/ Schneider Electric ll Rights Reserved 3
4 Product Description XF Series DESRIPTIO XF SERIES The SURGELOGI XF series surge protective device is a modular parallel transient voltage surge suppressor. The XF device is a multi-stage suppression circuit consisting of field-proven, fast-acting 40 mm metal oxide varistors (MOVs). surge suppression path is provided for each mode, line-to-neutral (L ), line-to-line (L L), line-to-ground (L G), and neutral-to-ground ( G). Each surge suppression mode is individually fused and uses circuitry with thermal cutouts to isolate the and ensure shutdown in the event of MOV damage during severe overvoltages, even when operated on high-fault current power systems. The suppression elements are encapsulated in a UL Listed thermosetting epoxy material, another performance element that provides additional protection. filter network provides wave shape smoothing and a high level of EMI/RFI noise attenuation. On-line diagnostics continuously monitor the device status, and LEDs signal a reduction in surge capacity or loss of a suppression circuit. Optional diagnostic packages include an audible alarm and dry contacts. Design Features External mounting next to panelboards Individually fused suppression modes Thermal cutout Solid state bi-directional LED indicators indicate loss of protection or fully operational circuit High-energy parallel design for category,, and 3 applications tracking filter with EMI/RFI filtering up to -50 d from 100 khz to 100 MHz Performance Features Surge apacity L L G G 80 k / phase 40 k 40 k 30 k XF Series Voltage Specifications UL Suppression Voltage Rating (SVR) atalog umber Service Voltage L L G G L L MOV TVS1XF /240 V, 1-phase 400 V 400 V 400 V 800 V 150 V TVS2XF Y/120 V, 3-phase, 4-wire 400 V 400 V 400 V 800 V 150 V TVS3XF /120 V, 3-phase, high-leg delta 800/400 V 400 V 400 V 1500/800 V 275/150 V TVS4XF Y/277 V, 3-phase, 4-wire 800 V 800 V 800 V 1600 V 320 V TVS8XF Y/347 V, 3-phase, 4-wire 1200 V 1200 V 1200 V 2000 V 420 V MOV = Maximum ontinuous Operating Voltage Schneider Electric ll Rights Reserved 07/02
5 Product Description XP Series DESRIPTIO XP SERIES The SURGELOGI XP series surge protective device is a modular parallel transient voltage surge suppressor. The XP device is a multi-stage suppression circuit consisting of field-proven, fast-acting 40 mm metal oxide varistors (MOVs). surge suppression path is provided for each mode, line-to-neutral (L ), line-to-line (L L), line-to-ground (L G), and neutral-to-ground ( G). Each surge suppression mode is individually fused and uses circuitry with thermal cutouts to isolate the and ensure shutdown in the event of MOV damage during severe overvoltages, even when operated on high-fault current power systems. The suppression elements are encapsulated in a UL Listed thermosetting epoxy material, another performance element that provides additional protection. filter network provides wave shape smoothing and a high level of EMI/RFI noise attenuation. On-line diagnostics continuously monitor the device status, and LEDs signal a reduction in surge capacity or loss of a suppression circuit. Optional diagnostic packages include an audible alarm and dry contacts. Design Features External mounting next to panelboards Individually fused suppression modes Thermal cutout Solid state bi-directional LED indicators indicate loss of protection or fully operational circuit High-energy parallel design for category,, and 3 applications tracking filter with EMI/RFI filtering up to -50 d from 100 khz to 100 MHz Performance Features Surge apacity L L G G 50 k / phase 25 k 25 k 19.5 k XP Series Voltage Specifications UL Suppression Voltage Rating (SVR) atalog umber Service Voltage L L G G L L MOV TVS1XP /240 V, 1-phase 400 V 400 V 400 V 800 V 150 V TVS2XP Y/120 V, 3-phase, 4-wire 400 V 400 V 400 V 800 V 150 V TVS3XP /120 V, 3-phase, high-leg delta 800/400 V 400 V 400 V 1500/800 V 275/150 V MOV = Maximum ontinuous Operating Voltage 07/ Schneider Electric ll Rights Reserved 5
6 pplication Information XG, XT, XF, and XP Series PPLITIO IFORMTIO The effects of lightning and the damage caused by lightning-generated transients are well known. The failure of sensitive electronic equipment in a facility located in a high lightning area can easily be attributed directly to lightning-generated transients. Transient protection can be installed on the power distribution system to protect this equipment from these externally generated transients. Lower magnitude transients generated within a facility and their effect on microprocessor-based equipment are less obvious than the transients induced by lightning. Transient voltages generated from inductive motors, pumps, electric welders, etc., may not be large enough to cause immediate damage, but they can cause sensitive equipment to malfunction. damaging transient voltage can enter a facility from several locations. The highest level of protection should be provided at the service entrance. second level of protection should be provided at distribution points serving critical areas, for example, computer rooms, accounting areas, and laboratories. Other facility entry points that should be protected include panels serving outdoor lights or outdoor equipment, such as motors. Protection should also be provided for critical areas with sensitive equipment essential to the company. products offered by Square D provide protection at every level of the electrical distribution system. Typical applications include: anking Transportation Retail Education Wastewater/Sanitation Utility Government Medical Insurance Petrochemical Financial Data Processing Military Telecommunications Publishing utomated Manufacturing OTE: Refer to the product-specific catalog for information about internally mounted devices Schneider Electric ll Rights Reserved 07/02
7 SELETIO D SPEIFITIOS XG Series Selection and Specifications XG, XT, XF, and XP Series Service Voltage 120/240 V, 1-phase, 3-wire 208Y/120 V, 3-phase, 4-wire 240/120 V, 3-phase, 4-wire (high-leg delta) 480Y/277 V, 3-phase, 4-wire 600Y/347 V, 3-phase, 4-wire * = enclosure option, _ = any other options Peak Surge urrent Rating Per Phase atalog umber 120 k TVS1XG12*_ 160 k TVS1XG16*_ 240 k TVS1XG24*_ 120 k TVS2XG12*_ 160 k TVS2XG16*_ 240 k TVS2XG24*_ 120 k TVS3XG12*_ 160 k TVS3XG16*_ 240 k TVS3XG24*_ 120 k TVS4XG12*_ 160 k TVS4XG16*_ 240 k TVS4XG24*_ 120 k TVS8XG12*_ 160 k TVS8XG16*_ 240 k TVS8XG24*_ XT Series Service Voltage 120/240 V, 1-phase, 3-wire 208Y/120 V, 3-phase, 4-wire 240/120 V, 3-phase, 4-wire (high-leg delta) 480Y/277 V, 3-phase, 4-wire 600Y/347 V, 3-phase, 4-wire * = enclosure option, _ = any other options Peak Surge urrent Rating Per Phase atalog umber 120 k TVS1XT12*_ 160 k TVS1XT16*_ 240 k TVS1XT24*_ 120 k TVS2XT12*_ 160 k TVS2XT16*_ 240 k TVS2XT24*_ 120 k TVS3XT12*_ 160 k TVS3XT16*_ 240 k TVS3XT24*_ 120 k TVS4XT12*_ 160 k TVS4XT16*_ 240 k TVS4XT24*_ 120 k TVS8XT12*_ 160 k TVS8XT16*_ 240 k TVS8XT24*_ XF Series Service Voltage Peak Surge urrent Rating Per Phase atalog umber 120/240 V, 1-phase, 3-wire 80 k TVS1XF80*_ 208Y/120 V, 3-phase, 4-wire 80 k TVS2XF80*_ 240/120 V, 3-phase, 4-wire (high-leg delta) 80 k TVS3XF80*_ 480Y/277 V, 3-phase, 4-wire 80 k TVS4XF80*_ 600Y/347 V, 3-phase, 4-wire 80 k TVS8XF80*_ * = enclosure option, _ = any other options 07/ Schneider Electric ll Rights Reserved 7
8 Selection and Specifications XG, XT, XF, and XP Series XP Series Service Voltage Peak Surge urrent Rating Per Phase atalog umber 120/240 V, 1-phase, 3-wire 50 k TVS1XP50*_ 208Y/120 V, 3-phase, 4-wire 50 k TVS2XP50*_ 240/120 V, 3-phase, 4-wire (high-leg delta) 50 k TVS3XP50*_ * = enclosure option, _ = any other options Specifications Relative Humidity Operating Frequency Storage Temperature Operating Temperature Standards Fusing 0 to 95% non-condensing Hz -20 to +65 (-4 to +149 F) 0 to +50 (+32 to +122 F) SI/IEEE and UL, UL 1449 Second Edition UL ategory Section 37.3 (25 k test) Individually fused suppression modes Enclosure Options Enclosure Type Environment Provides Protection gainst vailable on Series atalog Option umber EM 1 Indoor ontact with the enclosed equipment. ll, F EM 12 Indoor irculating dust, falling dirt, dripping liquids. ll R EM 3R Outdoor Falling rain, sleet. Undamaged by ice. ll R EM 4 Indoor/Outdoor Windblown dust and rain, splashing water, hose-directed water. EM 4X EM 4X Stainless Indoor/Outdoor Indoor/Outdoor = surface mount; F = flush mount Windblown dust and rain, splashing water, hose-directed water. Resists corrosion. Windblown dust and rain, splashing water, hose-directed water. Resists corrosion. XG 4 XT, XF, XP R XG only XG only X S Other Options Option Description vailable on Series atalog Option umber Remote Monitor and Dry ontacts Displays the alarm status of the surge protective device up to 1,000 ft (305 m) away from the unit. This option comes with and uses the dry contacts option. ll M Internal ircuit Isolator Provides a mechanical means to electrically isolate the entire surge suppressor after opening the enclosure door to facilitate the servicing of the unit s components. XG I udible larm The audible alarm provides sound if an inoperative condition occurs. XG, XT XF, XP one (standard) Dry ontacts Provides an available 9-pin D-Sub style connector to monitor power O/OFF and alarm status. ll D Surge ounter Displays the combined total number of transient voltage surges detected from L G, L L, L, and G since the counter was last reset. XG, XT Schneider Electric ll Rights Reserved 07/02
9 Selection and Specifications XG, XT, XF, and XP Series M Module Replacements atalog umber System Voltage Peak Surge urrent Rating Phase Phase Phase 120 k M1XG12 empty M1XG12 120/240 V, 1-phase, 3-wire 160 k M1XG16 empty M1XG k M1XG24 empty M1XG k M1XG12 M1XG12 M1XG12 208Y/120 V, 3-phase, 4-wire 160 k M1XG16 M1XG16 M1XG k M1XG24 M1XG24 M1XG k M1XG12 M3XG12 M1XG12 120/240 V, 3-phase, 4-wire, high-leg delta 160 k M1XG16 M3XG16 M1XG k M1XG24 M3XG24 M1XG k M4XG12 M4XG12 M4XG12 480Y/277 V, 3-phase, 4-wire 160 k M4XG16 M4XG16 M4XG k M4XG24 M4XG24 M4XG k M8XG12 M8XG12 M8XG12 600Y/347 V, 3-phase, 4-wire 160 k M8XG16 M8XG16 M8XG k M8XG24 M8XG24 M8XG24 With all system voltages, devices must be grounded in accordance with all applicable standards. Phase modules are different than Phase and Phase modules. 07/ Schneider Electric ll Rights Reserved 9
10 Wiring Diagrams XG Series PHSE EU EUTRL PHSE PHSE "" PHSE EUTRL EUTRL PHSE "" ustomer onnections 1-Phase, 3-Wire, Grounded Installation PHSE PHSE EU EUTRL PHSE EUTRL PHSE PHSE "" PHSE "" EUTRL PHSE "" ustomer onnections 3-Phase, 4-Wire, Grounded Wye Installation PHSE (HIGH-LEG) EU PHSE PHSE EUTRL PHSE EUTRL ote: The high-leg of the power system must connect to phase of the. PHSE "" PHSE "" EUTRL PHSE "" ustomer onnections 3-Phase, 4-Wire, High-Leg Delta Installation Schneider Electric ll Rights Reserved 07/02
11 EU Wiring Diagrams XG Series PHSE EU EUTRL PHSE "" PHSE EUTRL EUTRL PHSE "" PHSE ustomer onnections 1-Phase, 3-Wire, Grounded Installation with ircuit Isolator PHSE PHSE EUTRL PHSE EUTRL PHSE "" PHSE "" EUTRL PHSE "" PHSE ustomer onnections 3-Phase, 4-Wire, Grounded Wye Installation with ircuit Isolator PHSE (HIGH-LEG) EU PHSE PHSE EUTRL PHSE "" PHSE PHSE "" EUTRL EUTRL PHSE "" ote: The high-leg of the power system must connect to phase of the. ustomer onnections 3-Phase, 4-Wire, High-Leg Delta Installation with ircuit Isolator 07/ Schneider Electric ll Rights Reserved 11
12 Wiring Diagrams XT Series Dry contact cable PHSE G EUTRL PHSE J1 J2 J3 1-Phase, 3-Wire, Grounded Installation Dry contact cable PHSE G PHSE EUTRL PHSE J1 J2 J3 3-Phase, 4-Wire, Grounded Wye Installation Dry contact cable High-leg PHSE (HIGH-LEG) G PHSE PHSE EUTRL ote: The high-leg of the power system must connect to phase of the. J1 J2 J3 3-Phase, 4-Wire, High-Leg Delta Installation Schneider Electric ll Rights Reserved 07/02
13 Wiring Diagrams XF/XP Series PHSE φ φ φ EUTRL PHSE 1-Phase, 3-Wire, Grounded Installation PHSE PHSE φ φ φ EUTRL PHSE 3-Phase, 4-Wire, Grounded Wye Installation PHSE (HIGH-LEG) φ φ φ PHSE High-Leg PHSE EUTRL ote: The high-leg of the power system must connect to phase of the. 3-Phase, 4-Wire, High-Leg Delta Installation 07/ Schneider Electric ll Rights Reserved 13
14 Dimensions and Weights XG Series (314) (254) (324) (344) Front View Inside View EM 1 and EM 4 Enclosures EM 4X Stainless Steel Enclosure (365) (305) (425) (451) Front View Inside View EM 1 and EM 4 Enclosures with ircuit Isolator EM 4X Stainless Steel Enclosure with ircuit Isolator Schneider Electric ll Rights Reserved 07/02
15 Dimensions and Weights XG Series (356) (305) (279) (355) 9.00 (229) (305) Front View Inside View EM 1 Flush Mount Enclosure (356) (302) (279) (508) (381) (457) Front View Inside View EM 1 Flush Mount Enclosure with ircuit Isolator Dimensions Weight Depth Inches (millimeters) 35 lb (16 kg) maximum The maximum depth of the outer face of the door to the mounting plane is 6.25 in. (159 mm). 07/ Schneider Electric ll Rights Reserved 15
16 Dimensions and Weights XG Series (318) 3.00 (76) (330) (356) Front View Inside View EM 12/3R Enclosure (419) (330) (559) (533) Front View Inside View EM 12/3R Enclosure with ircuit Isolator Dimensions Weight Depth Inches (millimeters) 35 lb (16 kg) maximum The maximum depth of the outer face of the door to the mounting plane is 6.5 in. (165 mm) Schneider Electric ll Rights Reserved 07/02
17 Dimensions and Weights XG Series (369) (311) (451) (420) Front View, lear over Removed EM 4 Enclosure without ircuit Isolator EM 4X Enclosure with ircuit Isolator Dimensions Weight Depth Inches (millimeters) 35 lb (16 kg) maximum The maximum depth of the outer face of the door to the mounting plane is 8 in. (203 mm). 07/ Schneider Electric ll Rights Reserved 17
18 Dimensions and Weights XT Series 8.30 (211) 6.00 (152) 8.00 (203) 9.55 (243) 8.75 (222) 8.30 (211) 8.00 (203) over Removed EM 1, EM 12/3R, and EM 4 over onfiguration with Window and Tamper Proof Option Dimensions Weight Depth Inches (millimeters) 17 lb (8 kg) maximum The maximum depth of the outer face of the door to the mounting plane for the EM 1 enclosure is 6.0 in. (152 mm). For the EM 12/3R and EM 4 enclosures it is 5.5 in. (140 mm) (241) 9.50 (241) EM 1 over onfiguration for Flush Mount Dimensions Weight Depth Inches (millimeters) 17 lb (8 kg) maximum The maximum depth of the outer face of the door to the mounting plane is 5.7 in. (145 mm) Schneider Electric ll Rights Reserved 07/02
19 Dimensions and Weights XF/XP Series 7.55 (192) 6.00 (152) 6.80 (173) 5.36 (136) 6.00 (152) φ φ φ EM 1, EM 12/3R, and EM 4 Enclosures Dimensions Weight Depth Inches (millimeters) 6 lb (3 kg) maximum The maximum depth of the outer face of the door to the mounting plane is 4.0 in. (100 mm). 07/ Schneider Electric ll Rights Reserved 19
20 Square D ompany 8001 Highway 64 East Knightdale, Square D ( ) Schneider anada Inc. 19 Waterman venue, M4 1 Y2 Toronto, Ontario (416) atalog o. 1310T9901R10/01 July Schneider Electric ll Rights Reserved Replaces 1310T9901 dated 11/99.
Surgelogic Surge Protective Device (SPD)
Surgelogic Surge Protective Device () EB, EM, and HW Series atalog 1310T0202R05/09 2009 lass 1310 OTETS Description............................................. Page Product Description...........................................2
Surgelogic Surge Protection Device EMA, EBA, and HWA Series
Surgelogic Surge Protection Device EM, EB, and HW Series atalog 1310T0202R5/07 2007 lass 1310 OTETS Description..............................................Page Product Descriptions..........................................
Applications. Remote Display Mounting Kits
June 200 Sheet 105 Surge Protection Products TVSS General Description Clipper Power System Visor Series.1-5 Clipper Power System Visor Series General Description Eaton s Cutler-Hammer leading-edge surge
CPS 100 480Y S K CPS 100 480Y S C
Ref. No. 1299 Visor Series Ordering Guidelines Table.1-4. Retrofit Surge Protection Products TVSS General Description Clipper Power System Visor Series CPS 100 480Y S K.1-9 Surge Ratings 100 = /phase 120
SURGE PROTECTIVE DEVICES (SPDs) LOW VOLTAGE AC EXTERNAL SIDEMOUNT SURGE PROTECTION FOR ELECTRICAL DISTRIBUTION SYSTEMS SECTION 16671B SECTION 16671B
SURGE PROTECTIVE DEVICES (SPDs) EXTERNAL SIDEMOUNT UNITS LOW VOLTAGE AC SURGE PROTECTION FOR ELECTRICAL DISTRIBUTION PART 1 GENERAL 01 02 03 SCOPE The Contractor shall furnish and install the Surge Protective
SURGE PROTECTIVE DEVICES (SPDs) LOW VOLTAGE AC INTEGRATED SURGE PROTECTION FOR ELECTRICAL DISTRIBUTION SYSTEMS SECTION 16671A SECTION 16671A
SURGE PROTECTIVE DEVICES (SPDs) INTEGRATED UNITS LOW VOLTAGE AC SURGE PROTECTION FOR ELECTRICAL DISTRIBUTION SYSTEMS PART 1 GENERAL 01 02 03 SCOPE The Contractor shall furnish and install the Surge Protective
Project Name: Nortrax Section 26 41 00 Project No: 13-013 SURGE PROTECTION DEVICES Page 1
Page 1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. General: Drawings and general provisions of the Contract, including General and Supplementary Conditions and Divisions 1 Specification sections apply to
Power surges can also be generated by equipment in your facility such as:
Power Quality Surge Suppressors What is Surge Protection A surge suppressor can be the first and best defense against the instant or gradual destruction of electrical equipment. Compared to the replacement
APC Matrix-UPS 5kVA 208V/240V In 120/208/240V Out
APC Matrix-UPS 5kVA 208V/240V In 120/208/240V Out APC Matrix-UPS, 3750 Watts / 5000 VA,Input 208V / Output 120V, 208V, Interface Port DB-9 RS-232, SmartSlot, Extended runtime model Includes: CD with software,
APC. DIN Rail Control Panel Mounting Uninterruptible Power Supply. Catalog
APC DIN Rail Control Panel Mounting Uninterruptible Power Supply Catalog 2014 Contents Introduction, description... 4 Specifications...5 References....6 Dimensions...7 Wiring diagrams....8 Product reference
SURGELOGIC TVSS Surge Protective Devices Enhance System Protection and Reduce Equipment Damage
TVSS Surge Protective Devices Enhance System Protection and Reduce Equipment Damage Internal and External Mounted TVSS Retrofit or New Construction Low Let-through Levels High Surge Capacities Internal
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a
Uninterruptible Power Supply
96-01101 / rev. 2e / 2-2-12 Uninterruptible Power Supply EXCEPTIONAL SUPPORT & PROTECTION Uninterruptible Power Supply with Energy Saver design that is optimized to address the needs of A/V systems Features
Type 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
Industrial-Grade UPS System Heavy-duty power protection for harsh industrial environments
Industrial-Grade UPS System Heavy-duty power protection for harsh industrial environments Model #: SM2000RMX Heavy-duty, industrial-grade metal housings Shock and vibration rated to MIL-STD-810D 19 inch
Learning Module 13: Panelboards and Switchboards. 101 Basic Series
Learning Module 13: Panelboards and Switchboards 101 Basic Series What You Will Learn We ll step through each of these topics in detail: Introduction 4 Definitions 4 Similarities Between Panelboards and
surge protection solutions
Surge protection devices Innovative Technology Innovative and reliable surge protection solutions Eaton Innovative Technology SPD products Innovative Technology products are a part of Eaton s electrical
I STAR COMPUTER CO., LTD
I STAR COMPUTER CO., LTD Mini Redundant Power Supply 300W+300W for IPC-Computer Model No. TC-300R8 Table of content 1. Introduction...1 2. Specification 2.1 Input Voltage...1 2.2 DC Output...1 2.3 PS-ON
Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
Solid State Timers Type F
Solid State Timers Type F Class 9050 CATALOG CONTENTS Description.....................................................Page Product Descriptions............................................. 3 Application
Lightning Arresters P30027 18 KVA P30038 10 KVA. Description & Installation
Lightning Arresters P30027 18 KVA P30038 10 KVA Description & Installation Printed in USA 09/11 TO330 Rev. B Table of Contents Page 1.0 SCOPE 2 2.0 PRODUCT OVERVIEW 2 2.1 Intended Uses 2 2.2 Lightning
Distribution Dry Type Transformers
8 TRASFORMERS Distribution Dry Type Transformers Table (Contact Sales office for List Price) (commonly used) 1a. 115 C Rise F 1b. 80 C Rise B 4. Wall Brackets1 W 6. Low noise XdB below std. LX Type bg
6 Buck Boost Transformers
6 uck oost Transformers uck-oost transformers are small, single phase, dry type distribution transformers designed and shipped as insulating/isolating transformers. They have a dual voltage primary and
Power Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
QuickSpecs. Overview. HP Power Distribution Rack. HP Power Distribution Rack. DA - 12859 North America Version 5 August 22, 2008 Page 1
Overview It's getting harder to manage a data center efficiently, with rising utility bills and ever-increasing demands due to processor power and server density increases. Growing user requests mean heavier
GRX-PWM Pulse Width Modulation Interface
Pulse Width Modulation Interface pwm1 05.30.06 COOPERSBURG, PA 18036 U.S.A. Coopersburg, G 8 BR PA 18036 U.S.A. 144317 GRXTVI 19 P10 CB 0791275 Ratings Load T ype Switched Lowvoltage Load Type Switched
Bulletin 150 SMC Flex Smart Motor Controller Specifications
Specifications Specifications Standard Features Optional Features Installation Setup Communications Power Wiring Control Wiring Keypad Software Starting and Stopping Modes Protection and Diagnostics Metering
Centro-Matic Automatic Lubrication Systems System Controls
Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several different models may be chosen to control power-operated pumps, depending on the
Three-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
Three Phase Transformers
Three Phase Transformers ontents Three Phase - General Purpose... 26 Three Phase - General Purpose Scott ed... 30 Three Phase - dditional ombinations vailable... 31 Three Phase - ion Diagrams... 32 Series
1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting
Series - Relay interface modules 8-10 - 16 A Features.01.02 1 & 2 pole relay interface modules, screw terminal socket, mm wide. Ideal interface for PL and electronic systems.01-1 Pole 16 A.02-2 Pole 8
Features. Display. Measurements. Intelligent. Accuracy. Models. Installation DEIF A/S. Multi-instrument 4921210109D
7000/7000C/7020 Multi-instrument 4921210109D Features Measurements All 3-phase AC measurements True RMS Replaces analogue meters Demand on each phase current Accuracy U, I and F class 0.5 Other values
Audio/Video AVR Series UPS - Intelligent Automatic Voltage Regulated Power Management System
Audio/Video AVR Series UPS - Intelligent Automatic Voltage Regulated Power Management System MODEL NUMBER: HTR05-1U Description Tripp Lite's HTR05-1U AVR Series intelligent, Automatic Voltage Regulated
Power Management Module 2. Installation
Power Management Module 2 30 300 kva Installation Table of Contents Safety... 1 Safety Instructions... 1 Certification Standards Three Phase... 1 Product Safety... 2 Special Precautions... 2 System Description...
Mains. Assembly SCCRs. Voltage ratings. Bus amperages. Branch circuits. Panels. Through-lugs & loadside disconnect. Neutrals. Grounds.
Quik-Spec oordination Panelboard Specifications 11 PELORDS QuikShip ll SQSP configurations of the standard EM 1 enclosure can be specified for shipment within 10 business days of order when specified.
Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility
Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility Catalog 2800CT1001R02/13 2013 Class 2800 CONTENTS Description............................................ Page 2 Indoor Charging
CONTROL PANEL INSTALLATION INSTRUCTIONS. Single Phase Simplex Page 2-7. 3-Phase Simplex Page 8-13
CONTROL PANEL INSTALLATION INSTRUCTIONS Single Phase Simplex Page 2-7 3-Phase Simplex Page 8-13 Single Phase Simplex SXL21=3, SXL24=3, SXH21=3, and SXH24=3 Manufactured by SJE-Rhombus Installation Instructions
RC NETWORKS SALES GUIDE
SALES GUIDE INTRODUCTION TO Recent developments in electronic equipment have shown the following trends: Increasing demands for numerical control machines, robotics and technically advanced appliances
NEHB Panelboards Main Lugs and Main Circuit Breaker Replacement Parts
NEH Panelboards Main Lugs and Main ircuit reaker Replacement Parts lass 1660 ONTENTS Schneider Electric rands Page Main Lugs and Main ircuit reaker225 Max............................ 2 Main Lugs600 Max.,
OmniVS Series 1500VA Line-Interactive Tower 120V UPS with USB port
OmniVS Series 1500VA Line-Interactive Tower 120V UPS with USB port MODEL NUMBER: OMNIVS1500 Highlights 1500VA / 1.5kVA tower 120V line-interactive UPS Corrects brownouts and overvoltages from 75 to 147V
Magnum Mobile Generator MMG55 Specifications
Empowering Real People Magnum Mobile Generator MMG55 Specifications ENGINE John Deere PE5030TF270 - turbocharged, diesel engine o Prime - 72 hp @ 1800 rpm o Standby - 80 hp @ 1800 rpm o 4 cylinder o 3.0
MEDIUM VOLTAGE CE-BF SWITCHBOARDS. UP TO 40.5 kv. CE - BF - C - en - REV.00 2012.4
CE - BF - C - en - REV.00 2012.4 APPLICATION CE-BF Switchbords up to 40.5 kv are designed for use in public and industrial distribution system up to 40,5KV for the operation and protection of lines, transformers,
ASCO SERIES 185 Power Transfer Switches
ASCO SERIES 185 Power Transfer Switches 4-hour protection no matter when trouble strikes ASCO Series 185 Power Transfer Switches An Automatic Transfer Switch helps prevent... Your business or home from
PSDC 08128. PSDC 12V/8A/8x1A Power supply for up to 8 analog cameras PTC/TOPIC.
PSDC 08128 v.1.2 PSDC 12V/8A/8x1A Power supply for up to 8 analog cameras PTC/TOPIC. EN** Edition: 9 from 25.05.2015 Supersedes the edition: 8 from 12.12.2014 the 8x 1A/12V DC power output for powering
DDX 7000 & 8003. Digital Partial Discharge Detectors FEATURES APPLICATIONS
DDX 7000 & 8003 Digital Partial Discharge Detectors The HAEFELY HIPOTRONICS DDX Digital Partial Discharge Detector offers the high accuracy and flexibility of digital technology, plus the real-time display
DCS Input/Output Relay Card Series
Input/Output Relay Card Series I/O RELAY CARD (with loopback test function) 8N The 8N series I/O Relay Cards easily and quickly standardize and facilitate installation of the relay board. Loopback test
CalMod Design-Build Electrification Services
SECTION 28 16 00 INTRUSION DETECTION SYSTEM PART 1 - GENERAL 1.1 DESCRIPTION A. This section describes the detailed technical requirements for the Intrusion Detection System (IDS), where the Contractor
Continuous Power... Continuous Protection
Series 165 We Keep Your Power On Continuous Power... Continuous Protection An Automatic Transfer Switch helps prevent... Your business or home from losing power during bad weather or utility power equipment
Mini Power-Zone Unit Substation Product Description. Product Description. Features. Typical Applications
Product Description Product Description The Mini Power-Zone Unit Substation from Schneider Electric is a miniaturized version of our Power-Zone Unit Substation. Included are: Circuit Breaker Sealed Step-Down
Section 21. Telecommunication Hardware. www.geindustrial.com BuyLog Catalog 21-1
Introduction...21-1 Fiber Closure Hardware...21-2 Cable Location Surge Protectors...21-4 Introduction GE has been manufacturing Telecommunication Hardware products for over 20 years and has become a leader
A series of technology briefs spanning Tyco Electronics product portfolio
A series of technology briefs spanning Tyco Electronics product portfolio Coordinated Circuit Protection Schemes Help Prevent Overvoltage and Overcurrent Damage Through advances in materials science and
Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 50 bar (5000 psi) and 7 L/min (60 USgpm) n Eaton rand ETON Screw-In Cartridge Valves E-VLSC-MC00-E November 009 -.
Series 427. 1/16 DIN Multi-Mode Bar Graph Display Timer TIMERS PRODUCT HIGHLIGHTS
Series 427 1/16 DIN Multi-Mode Bar Graph Display Timer PRODUCT HIGHLIGHTS Digital Setting with 0.1% Accuracy Unique LED Bargraph Indicates Time Cycle in 20% Increments 8 Field Selectable Modes of Operation
Video Camera Installation Guide
Video Camera Installation Guide The intent of this guide is to provide the information needed to complete or modify a video camera installation to avoid lightning and induced power surge damage. This guide
330505 Low Frequency Velocity Sensor
330505 Low Frequency Velocity Sensor Bently Nevada* Asset Condition Monitoring Description The Bently Nevada Low Frequency Velocity Sensor is designed to measure absolute (relative to free space) bearing
ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.
1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
FFI. Advances in Medium and Low Voltage Power Distribution ESS Metron Expo and Technical Seminars. Presented By: Greg Pelster & Robert Schmid
Advances in Medium and Low Voltage Power Distribution ESS Metron Expo and Technical Seminars Presented By: Greg Pelster & Robert Schmid FFI Ferrie, Franzmann Industries LOW VOLTAGE SWITCHGEAR & LOW VOLTAGE
MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
8146/5 Series Breaker Panelboards
8146/5 Series Breaker Panelboards DISTRIBUTION BREAKER PANELBOARDS FOR HAZARDOUS & CORROSIVE ENVIRONMENTS Breaker Panels Features: Wide variety of Flameproof branch circuit breakers for Zone 1 & Division
TSn SERIES Surge Protective Device
Page: 1 of 8 TSn SERIES Surge Protective Installation & Operation Manual 3621 Saunders Avenue www.systems.us Ph 804.355.1100 Richmond, VA 23227 4354 Sales@Systems.us Fax 804.355.8900 Page: 2 of 8 Quick
RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
Bulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller
Overview/Modes of Operation Bulletin 150 Smart Motor Controller The SMC-3 is a compact, simple to use, solid-state motor controller designed to operate 3-phase motors. It features a built-in overload relay
Technical Specification. Generating Set with Waukesha engine burning natural gas
Technical Specification Generating Set with Waukesha engine burning natural gas The following presents the Gas Engine Generating Set (GEGS) APG1000 type, based on Waukesha gas engine 16V150LTD. Using the
EVlink Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility
EVlink Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility Catalog 2800CT1001 2014 Class 2800 CONTENTS Description............................................ Page 2 Outdoor
Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
Always On UPS Systems Inc., #100-150 Campion Road, Kelowna, BC Canada V1X 7S8
Door Mount UPS (Patent Pending) Shelf Mount UPS (Patent Pending) DESCRIPTION: The Always On NDM (door mount) and NSM (shelf mount) Series UPS s are dual conversion online UPS systems provided in slim,
Rack mounted telephone- and leased line modem for industrial applications
Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as
Photovoltaic Solar Energy Unit EESFB
Technical Teaching Equipment Photovoltaic Solar Energy Unit EESFB Products Products range Units 5.-Energy Electronic console PROCESS DIAGRAM AND UNIT ELEMENTS ALLOCATION Worlddidac Member ISO 9000: Quality
Whale 3. User Manual and Installation Guide. DC Servo drive. Contents. 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty.
Whale 3 DC Servo drive User Manual and Installation Guide Contents 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty. 2. Electric specifications. 2.1.Operation ranges. 3. Connections
SELECTION GUIDE INPUT CHARACTERISTICS. Voltage set point accuracy. Overall voltage error. Temperature coefficient of output voltage (slope)
OBSOLETE NMPD0 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Efficiency (Min.) Power (Max.) V V % W NMPD003C 3. 9.50 NMPD005C 5. 9.5 NMPD0C. 0 0.00 NMPD05C 5. 9 0.00 FEATURES RoHS
CPCI-3U-AC-300W-R. Rugged 300W AC Input 3U CompactPCI Power Supply. Electrical Specification for: Telkoor Part Number: 900-4602-0000
Electrical Specification for: CPCI-3U-AC-300W-R Rugged 300W AC Input 3U CompactPCI Power Supply Telkoor Part Number: 900-4602-0000 GENERAL SCALE RELEASE DATE 12/9/06 SHEET 1 OF 6 REVISION HISTORY Rev Level
Climasys Thermal Management System. Schneider Electric Universal Enclosures 2009
Climasys Thermal Management System Schneider Electric Universal Enclosures 2009 Schneider Electric Universal Enclosures The specialist in sealed equipment What is the mission of Schneider Electric Universal
MTE SERIES RLW. World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930. 2009 MTE Corporation
MTE SERIES RLW World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930 2009 MTE Corporation IMPORTANT USER INFORMATION NOTICE MTE Series RLW reactors are components designed to improve the reliability
Thermistor motor protection
Thermistor motor protection CM-E Range Thermistor motor protection Thermistor motor protection relays Benefits and advantages Selection table Operating principle and fields of application for thermistor
Installation and Operation Manual Back-UPS BX800CI-AS/BX1100CI-AS
+ Installation and Operation Manual Back-UPS BX800CI-AS/BX1100CI-AS Inventory Safety and General Information bu001c This unit is intended for indoor use only. Do not operate this unit in direct sunlight,
Life Insurance for Switches & Circuit Breakers
Life Insurance for Switches & Circuit Breakers Surviving Harsh Environments Author: John Arnold Director Sales & Marketing APM HEXSEAL Unsealed electromechanical switches and circuit breakers offer limited
General Purpose Relays Types K, R, N, and C
General Purpose Relays s K, R, N, and C Catalog 0CT00R/0 00 Class 0 CONTENTS Description............................................. Page R Miniature Plug-in Relays.............................. K Plug-in
Safety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
UNIVERSITY OF WASHINGTON Facilities Services Design Guide. Electrical. Metering and Monitoring. Basis of Design
Basis of Design This section applies to the design, installation and integration of metering and monitoring equipment, including: hardware installed in the electrical service and distribution equipment,
Stand Alone POTS Fiber Optic System. P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit. Description & Installation
Stand Alone POTS Fiber Optic System P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit Description & Installation Printed in USA 09/11 TO466 Rev. A Table of Contents Page 1.0 SCOPE 2 2.0 PRODUCT
PSU-U-24V/AC-6A/10/FTA-TR-MC PSAC 0624
PSU-U-24V/AC-6A/10/FTA-TR-MC PSAC 0624 v.1.0 AC/AC power supply unit Edition: 1 from 24 th October 2008 Supercedes edition: ---------- 10062009 CONTENTS: 1. Technical description. 1.1. General description
Contents. Clean Control Center Harmonic Correction Unit. Selection Dimensions Specifications. Description
lean ontrol enter Harmonic orrection Unit Technical Data Selection Dimensions Specifications ontents Description Page lean ontrol enter Specifications Harmonic orrection Unit...... 2 Sizing and Selection...........................................
PLAN REVIEW GUIDE FOR FIRE ALARM
PLAN REVIEW GUIDE FOR FIRE ALARM PROJECT NAME: PERMIT # PROJECT ADDRESS: CONTACT PERSON: PHONE Fire alarm system installation information shall be provided on the appropriate architectural and electrical
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/40/21560048.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
Pin and Socket onnectors MP Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin
Bourns Resistive Products
Bourns Resistive Products Diverse Requirements Drive Innovations to Pulse Resistors Introduction Countless circuits depend on the protection provided by one of the most fundamental types of passive components:
LUXEON LEDs. Circuit Design and Layout Practices to Minimize Electrical Stress. Introduction. Scope LED PORTFOLIO
LED PORTFOLIO LUXEON LEDs Circuit Design and Layout Practices to Minimize Electrical Stress Introduction LED circuits operating in the real world can be subjected to various abnormal electrical overstress
Advanced Power Supply Topics
Advanced Power Supply Topics 2006 Microchip Technology Incorporated. All Rights Reserved. Advanced Power Supply Topics Slide 1 Welcome to the Advanced Power Supply Topics Web seminar. Page 1 Session Agenda
Scepter PVC Molded Junction Boxes
Scepter PVC Molded Junction Boxes TM ELECTRICAL SYSTEMS PVC MOLDED JUNCTION BOXES 4" to 12" Fully Certified: NEMA, UL & CSA We build tough products for tough environments Standing Still is Not an Option.
Single Phase Soft Starter
Single Phase Soft Starter Installation & Operating Manual 6/02 Table of Contents Section 1 General Information................................................... 1 1 General Description................................................
Telephone- and leased line modem for industrial applications TD-36
Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased
Analog signal converters CC-E I/I Current / current isolators
ata sheet Analog signal converters CC-E I/I Current / current isolators The CC-E I/I is an isolator for the electrical isolation of current signals without auxiliary supply. It allows the isolation between
with Electronic Assistant
TECHNICAL DATASHEET #TDAX100200 BLDC Motor Drive Drives a 12V, 24V or 48V BLDC motor Bidirectional, up to 25A Smooth speed control using Hall Sensors CAN (SAE J1939) with Electronic Assistant Features:
Coaxial Cable Entry Panels, Coax and Grounding Connectors. Technical Note
Coaxial Cable Entry Panels, Coax and Grounding Connectors Technical Note Coaxial Cable Entry Panels, Coax and Grounding Connectors Surge Protection Solutions for PTC 2 Coaxial Cable Entry Panels, Coax
Quick Connect. quick - simple - efficient. www.g-mw.de
Quick Connect quick - simple - efficient www.g-mw.de Phone: +49 9103 7129-0 Fax: +49 9103 7129-207 Innovative connection technology to plug three single-phase current transformers to multifunctional power
GTEC transfer switch open transition
GTEC transfer switch open transition 40-1250 Amp Description The GTEC automatic transfer switch combines reliability and flexibility in a small, economical package for transferring loads between a utility
IN-OUT Thermometer with Cable Free Sensor and Clock
IN-OUT Thermometer with Cable Free Sensor and Clock MODEL: RAR232 USER'S MANUAL INTRODUCTION Congratulations on your purchase of the RAR232 In-Out Thermometer with 433MHz cable free sensor and calendar
ATC-300 Automatic Transfer Switch Controller
ATC-300 Technical Data New Information Technical Data Page 2 Effective: May 2004 ATC-300 Introduction The Cutler-Hammer ATC-300 from Eaton s Electrical business is a comprehensive, multi-function, microprocessor-based
POINT OBSTRUCTION LIGHTS POL EX LED v5 HAZARDOUS LOCATION
Compliances: Class I, Division 2, Groups A B C D, T5 at -40 deg C to +55 deg C* Class I, Zone 2, Groups IIA IIB+H2 IIC, T5 at -40 deg C to +55 deg C* Certified FAA L-810 by Intertek Testing Service (ETL)
TAA-Compliant SmartPro 120V 1kVA.8kW Line-Interactive Sine Wave UPS, SNMP, Webcard, 1U Rack, USB, DB9 Serial
TAA-Compliant SmartPro 120V 1kVA.8kW Line-Interactive Sine Wave UPS, SNMP, Webcard, 1U Rack, USB, DB9 Serial MODEL NUMBER: SM1000RM1UTAA Description Tripp Lite SM1000RM1UTAA 1000VA / 1kVA / 800 watt line