INSULATIONS PL A ASTERS PAINT ASTERS P S ADHESIVES AINT CERAMICS

Transcription

1 INSULATIONS PLASTERS PAINTS ADHESIVES CERAMICS

2 TILE ADHESIVES Bolix B Base Tile Adhesive Semi-flexible Adhesive BOLIX PE Grey Tile Adhesive Bolix P White Tile Adhesive Bolix P GROUTS AND SILICONES Bolix Aquastop Grout Bolix Procolor Grout Bolix Procolor Silicone for Sanitary Installations WATERPROOF MEMBRANES Bolix Hydro Waterproofing Membrane BOLIX HYDRO DUO Sealant BOLIX HYDRO T Sealing Tape Bolix Hydro T-W Sealing Tape PRIMERS Bolix N Deep Penetrating Sealer Bolix T Primer SCREEDS AND LEVELLERS NATURAL STONE RANGE OTHER AGENTS Bolix E Adhesive Bolix ES Adhesive Bolix SE Adhesive Bolix SE-R Adhesive Bolix PC Cement Screed Bolix PC-B Rapid Hardening Cement Screed Bolix PC-S Fast-Setting Thin-Coat Cementitious Screed Bolix EK Bonding Agent Bolix KL Clinker and Stone Bedding Mortar and Grout Bolix BIK Silicone Sealer Bolix BK Stone Grout Bolix BW Residue and Efflorescence Remover Bolix CLN Sanitary Façade Cleaner Bolix OM Acrylic Sealer Bolix SD Polyethylene Backer Rod Bolix SN20 Self Levelling Compound TOOLS WALL SECTIONS

3 WALL SECTIONS C D R 1 2 F T E S cementitious dispersion based on reactive resins normal adhesion improved adhesion fast setting slip resistant extended open time enhanced flexibility BOLIX B BASE TILE ADHESIVE For fixing wall and floor ceramic tiles. For interior and exterior applications. Can be uses in intermittently damp locations. C1 T Coverage: approx kg/m2 per 1 mm coat thickness Slump: < 0,50 mm Optimum coat thickness: 3 5 mm Grouting: after 48 h Application temperature: from +5 C to +25 C Mixing ratio: l of water for 25 kg of adhesive Workability: approx. 1 h Adhesion: > 0.5 MPa Container: 25 kg SEMI-FLEXIBLE ADHESIVE BOLIX PE For fixing large and heavy porcelain and quarry tiles. For interior and exterior applications. Can be used in intermittently damp locations. Due to its high performance the adhesive is recommended for heavy load areas (garages, workshops). Frost and water resistant. C2 T Coverage: approx kg/m2 per 1 mm coat thickness Slump: < 0,50 mm Optimum coat thickness: 3 5 mm Grouting: after 48 h Application temperature: from +5 C to +25 C Mixing ratio: l of water for 25 kg of adhesive Workability: approx. 4 h Adhesion: > 1.2 MPa Container: 25kg GREY TILE ADHESIVE BOLIX P For fixing ceramic and stone tiles to walls and floors. For interior and exterior applications. Can be used in intermittently damp locations. Highly recommended for fixing large and heavy porcelain, quarry or stone tiles (except for marble). Due to its high performance, the adhesive is recommended for heavy load areas (garages, workshops). C2 T Coverage: approx kg/m2 per 1 mm coat thickness Slump: < 0,50 mm Optimum coat thickness: 3 5 mm Grouting: after 48 h Application temperature: from +5 C to +25 C Mixing ratio: l of water for 25 kg of adhesive Workability: approx. 1.5 h Adhesion: > 1.0 MPa Container: 25kg

4 WALL SECTIONS WHITE TILE ADHESIVE BOLIX P Suitable to install ceramic, marble and natural stone cladding and a glass block wall. White cement mortar. For interior and exterior applications. Eliminates the risk of staining of marble and natural stone. Very good adhesion to the substrate. After mixing with water, its consistency prevents movement of mortar along circumferential ribs of the glass blocks. C2 T Coverage: approx kg/m2 per 1 mm coat thickness Optimum coat thickness is between 3 5 mm. 3 5 mm Optimum coat thickness when mm Grouting: after 48 h Application temperature: range from +5 C to +25 C Mixing ratio: l of water for 25 kg of adhesive Workability: approx. 1.5 h Adhesion: > 1.0 MPa Container: 25kg Colour: white BOLIX E ADHESIVE Flexible adhesive for fixing ceramic, porcelain, fully vitrified, mosaics and stone tiles to walls and floors. For interior and exterior applications. Can be used in intermittently damp locations. For underfloor heating and large format tiles installations. Water and frost resistant C2 TE Coverage: approx kg/m2 per 1 mm coat thickness Slump: < 0,50 mm Optimum coat thickness: 3 5 mm Grouting: after 48 h Application temperature: range from +5 C to +25 C Mixing ratio: l of water for 25 kg of adhesive Workability: approx. 1.5 h Adhesion: > 1.2 MPa Container: 25kg KLEBER BOLIX ES Fast setting tile adhesive. Frost and water resistant. For interior and exterior applications. Foot traffic after only 3 h! Grouting after only 6 h! Over underfloor heating. Over waterproof membranes. C2 FTE Slump: 0,50 mm Optimum coat thickness: 3 5 mm Grouting: after 6 h Application temperature: range from +5 C to +25 C Mixing ratio: l of water for 25 kg of adhesive Workability: approx. 1 h Initial adhesion: > 1,0MPa Container: 25kg Tile size 10 cm 10 cm 15 cm 15 cm 25 cm 25 cm 30 cm 30 cm 30 cm 30 cm Coverage: Notch size 4 mm 6 mm 8 mm 10 mm 12 mm Nominal coverage [kg/m2] 1,8 2,4 3,0 3,6 4,1 KLEBER BOLIX SE Super flexible and deformable adhesive for large format ceramic tiles and natural stones. For interior and exterior applications. Resistant to transverse deformations. Extended open time (approx. 30 min.). Minimised slip. Very good adhesion to vitrified low-porosity tiles and difficult substrates. Over floor heating C2TE S1 Coverage: approx kg/m2 per 1 mm coat thickness Slump: 0.50 mm Optimum coat thickness: 3 10 mm Grouting: after 48 h Application temperature: range from +5 C to +25 C Mixing ratio: l of water for 25 kg of adhesive Workability: approx. 4 h Initial adhesion: 1,0MPa Container: 25kg BOLIX SE-R ADHESIVE Flowable adhesive for large format tiles. Possible tile on tile installation. Excellent adhesion to vitrified low-porosity tiles and difficult substrates. Suitable for tiling over underfloor heating. Specially formulated to enable the use of water in various ratio depending on its application. Frost and water resistant. Slump: 0.50 mm Optimum coat thickness: 3 10 mm Grouting: after 48 h Application temperature: range from +5 C to +25 C Mixing ratio: l of water for 25 kg of adhesive Workability: approx. 3 h Initial adhesion: 1,0MPa Container: 25kg Tile size (30 x30 cm) (30 x30 cm) (30 x 30 cm) Coverage: Notch size 10 mm 12 mm U-notched trowel Nominal coverage [kg/m2] 3,8 4,5 6,0 C2E S1-04 -

5 GROUTS AND SILICONES: BOLIX AQUASTOP GROUT Water beading effect. For interior and exterior applications. Increased flexibility. Excellent water tightness Average coverage: approx kg/m2 - coverage will vary depending on joint width and depth as well as tile size. Colour range: 20 colours Consistency: dry powder Joint width: 2 7 mm Adhesion: > 0.5 MPa Walkable: after 24 h Available containers: 2kg, 5kg CG2WA BOLIX PROCOLOR GROUT Antibacterial protection due to the use of silver particles - Prosilver. Recommended for underfloor heating. Reduces water absorption. High resistance to scrubbing. Water and frost resistant. Easy to apply. Excellent adhesion to the substrate. Durable colours. Resistant to stain. Enhanced resistance to microbial growth. Colour range: 20 colours Consistency: dry powder Joint width: 1 7 mm Adhesion: > 0.5 MPa Walkable: after 24 h Available containers: 2.2 kg CG2WA RASPBERRY OLIVE BLUE SINOPIA GREY LIGHT PINK TURQUOISE DARK BEIGE VENETIAN PINK COCOA WALNUT BLACKA MILKY SEPIA DARK PINK CINNAMON BROWN SILVER CREAM GOLDEN STEEL Tile size [cm] Tile thickness [mm] Joint Width [mm] 2x2 5x5 10x10 7,5x15 10x20 15x15 20x20 10x Coverage: Coverage will vary depending on joint width and depth as well as tile size. Coverage [kg/m2] 1,4 0,5 0,6 0,6 0,5 0,4 0,4 0,9 Tile size [cm] Tile thickness [mm] Joint Width [mm] 20x20 25x33 30x30 12x24 40x40 30x60 45x45 50x50 60x Coverage [kg/m2] 0,7 0,5 0,5 1,3 0,4 0,6 0,5 0,2 0,1 BOLIX PROCOLOR SILICONE FOR SANITARY INSTALLATIONS Super flexible and water repellent. Increased resistance to fungi and mould. Colours from the Bolix Procolor colour chart. Improved resistance to adverse weather conditions and cleaning agents. Coverage: One 300 ml cartridge provides 18 linear metres of joint size 4x4 mm Colour range: 20 colours from the Bolix Procolor grout chart plus a transparent grout Consistency: highly viscous paste Available containers: 300ml cartridge

6 WATERPROOF MEMBRANES (UNDERTILE WATERPROOFING) BOLIX HYDRO WATERPROOFING MEMBRANE Single component, ready to use. Provides waterproofing membranes in interior and exterior applications. Excellent flexibility. Average coverage for two-coat application of the membrane on properly prepared substrate is between 1.3 and 2.0 kg/m2. Consistency: fluid Available containers: 4kg, 7kg, 14kg BOLIX HYDRO DUO SEALANT Two component. For internal and external applications. No priming necessary. Excellent adhesion to mineral substrates. Maximum coating thickness: 3 mm Available containers: Component A - 25 kg bags, Component B l container, COVERAGE: barriers damp proof waterproof maximum thickness required thickness 2,0 mm 2,5 mm 3,0 mm coverage [kg/m²] approx. 2,6 approx. 3,0 approx. 3,8 BOLIX HYDRO T SEALING TAPE Excellent flexibility High tensile strength Seals critical areas 120 mm in width Available containers: 10 m, 50 m BOLIX HYDRO T-W SEALING TAPE For interior and exterior applications Seals critical areas (expansion joints, drain or pipe outlets etc.) 120 mm in width Available containers: 10 m, 50 m BOLIX SD POLYETHYLENE BACKER ROD For filling expansion/construction joints Backing for sealant to limit its consumption Easy to apply Flexible, non-absorbent PRIMERS Available containers: plastic bag with 10 or 50 linear metre of the cord BOLIX N DEEP PENETRATING SEALER Widespread application. Seals off the substrate and improves adhesion. Reduces and evens out surface porosity, suppresses dust formation. Protects the primed surface against adverse effect of moisture penetration. Evens out the setting and drying process of the installed underlayment or screed. Coverage: approx kg/m2 for one coat application Colour: colourless Consistency: liquid Available containers: 1kg, 5kg, 10kg BOLIX T PRIMER For interior and exterior applications. Seals off the substrate and improves adhesion. Reduces and evens out surface porosity, suppresses dust formation. Protects the primed surface against adverse effect of moisture penetration. Evens out the setting and drying process of the installed underlayment or screed. Coverage: approx for one coat application Colour: colourless Consistency: liquid Available containers: 1kg, 5kg, 20kg

7 SCREEDS AND LEVELLERS BOLIX PC CEMENT SCREED Cement mortar to produce cement screeds. For interior and exterior applications. Frost resistant. High compressive strength. Average coverage: approx. 2.2 kg/m2 per 1 mm coat thickness Maximum coat thickness: up to 50 mm Compressive strength: > 25 Mpa Consistency: dry powder Available containers: 25kg BOLIX PC-B RAPID HARDENING CEMENT SCREED Rapid hardening, walkable after only 3 h. Tiling over after only 24 hours. Easy to apply. Forming slopes and ramps on balconies and terraces. For interior and exterior applications Average coverage: approx. 2 kg/m2 per 1 mm coat thickness Maximum coating thickness: mm Compressive strength C40 Consistency: dry powder Available containers: 25kg BOLIX PC-S FAST-SETTING THIN-COAT CEMENTITIOUS SCREED Fast setting, walkable after 5 h. Frost resistant. Forming slopes and ramps on balconies and terraces. Fibre reinforced. Shrinkage-compensated. Average coverage: approx. 2 kg/m2 per 1 mm coat thickness Optimum coat thickness: 5-30 mm Compressive strength: 30 MPa Consistency: dry powder Available containers: 25kg BOLIX EK BONDING AGENT Dispersion/Emulsion based on synthetic resins. Suitable to provide a bonding layer on mineral substrates for cement screeds PC-B and PC-S. Increases adhesion. Easy to work and apply. Resistant to high ph. Average coverage: approx kg/m2 mix ratio Bolix EK/water 1:2 for Bolix PC-B approx kg/m2 mix ratio Bolix EK/water 1:1 for Bolix PC-S Coat adhesion: approx. 1.5 MPa Density: approx. 1.0 kg/dm3 Available containers: 1kg, 5kg, 10kg BOLIX SN20 SELF LEVELLING COMPOUND High compressive strength. Foot traffic after only 6 h. For interior and exterior applications. Under underfloor heating. Average coverage: approx kg/m2 per 1 mm coat thickness Optimum coat thickness: from 2 to 20 mm Compressive strength: 20.0 MPa Consistency: dry powder Available containers: 25kg

8 NATURAL STONE RANGE / OTHER AGENTS BOLIX KL CLINKER AND STONE BEDDING MORTAR AND GROUT Bedding and joint grouting in one operation. Suitable for interior and exterior applications. Frost and water resistant after curing. Easy-to-mix, work and trowel. AVERAGE COVERAGE: Colour range: 9 colours: sand, grey, dark grey, brown, pewter, sand-yellow, white, dark brown, anthracite Optimum coat thickness: mm Compressive strength 0.15 MPa Consistency: dry powder Available containers: 25kg Joint width 10 mm 12 mm 15 mm Coverage approx. 37 kg/m2 of wall approx. 45 kg/m2 of wall approx. 55 kg/m2 of wall BOLIX BIK SILICONE SEALER Ideal to protect locations susceptible to intermittent damp conditions e.g. rainfall. Protects the sealed surface against adverse effect of moisture penetration. Does not change the colour of the surface. Suitable to minimise efflorescence and stain, grime or efflorescence development. Average consumption: for one coat application is approx kg/m2 Consistency: liquid Colour: milk BOLIX BK STONE GROUT For grouting exterior stone cladding. For interior and exterior applications. Average coverage: Coverage will vary with the surface texture. To determine precise coverage perform a test patch on the substrate. Consistency: dry powder, white, sand BOLIX BW RESIDUE AND EFFLORESCENCE REMOVER For cleaning quarry, ceramic and stone tiles and bathroom facilities etc. Excellent to remove efflorescence, hard cement deposits, organic grime and rust stains. Average coverage: Coverage will vary with the surface texture. To determine precise coverage perform a test patch on the substrate. Consistency: liquid Colour: colourless BOLIX CLN SANITARY FAÇADE CLEANER Strong cleaning effect Dissolved and removes dirt and stains i.e. grease, soot, dust etc. For interiors and exteriors Average coverage: approx litre/m2 Consistency: liquid Colour: light yellow - transparent BOLIX OM ACRYLIC SEALER Protects the sealed surface against adverse effect of moisture penetration Recommended for sealing mosaic textured plaster Bolix TM Suitable to minimise efflorescence and stain, grime or efflorescence development Average coverage: approx litre/m2 Consistency: liquid Colour: milk

9 TOOLS code pcs per package [units] Plastic bucket 12l BN045 1 Plastic bucket 16l BN046 1 Plastic bucket 20l BN047 1 Plastic mortar box 65l BN048 1 Plastic mortar box 90l BN049 1 Plastic mortar box 45l BN050 1 Grout bucket 16L code BN051 pcs per package [units] 11 Thin 4*5 construction foil IN09 50 Medium Eimer aus 4*5 Kunststoff, construction 13l foil IN02 IN Thick construction foil - blue IN11 20 Super strong Eimer 4x5 aus construction Kunststoff, 20l foil (red) BN051 IN Construction foil 0.5 kg original IN *5 Eimer construction aus Kunststoff, foil 1kg 13l IN02 IN

10 TOOLS Universal tape 50/10 IN15 12 Universal tape 50/25 IN16 60 Universal tape 50/50 IN17 54 Seaming tape 20m IN18 24 Seaming tape 45m IN19 24 Seaming tape 90m IN20 24 Seaming tape 150m IN21 24 Paper masking tape 19mm (48) IN22 24 Paper Eimer masking aus Kunststoff, tape 25mm 13l (36) IN02 IN Paper masking tape 30mm (40) IN24 48 Paper Eimer masking aus Kunststoff, tape 38mm 20l (24) BN051 IN Paper masking tape 48mm (24) IN

11 TOOLS Masking tape 25mm/50m IN27 24 Masking tape 30mm/50m IN28 24 Masking tape 38mm/50m IN29 36 Masking tape 50mm/50m IN30 32 PCV tape 30mm/25m IN31 24 PCV tape 38mm/25m IN32 24 PCV tape 50mm/25m IN33 24 Blue tape 25mm x 33m IN34 24 Eimer Blue tape aus Kunststoff, 30mm x 33m 13l IN02 IN Blue tape 38mm x 33m IN36 24 Blue tape 48mm x 33m BN051 IN

12 TOOLS Plastering tape 38mm x 33m orange IN38 24 Plastering tape 48mm x 33m orange IN39 24 Stainless 130x270 mm trowel, notched 4x4 mm, two material handle G-11 BN Stainless 130x270 mm trowel, notched 6x6 mm, two material handle G-11 BN Stainless 130x270 mm trowel, notched 8x8 mm, two material handle G-11 BN Stainless 130x270 mm trowel, notched 10x10 mm, two material handle G-11 BN Stainless 130x270 mm trowel, notched 12x12 mm, two material handle G-11 BN White rubber oat 140x280 mm BN

13 TOOLS Stainless putty knife 100mm BN Stainless putty knife 40mm BN Stainless putty knife 60mm BN Stainless putty knife 80mm BN Universal combination tool BN Stainless triangular brick trowel 200x190mm, wooden handle BN

14 TOOLS Stainless bucket trowel 115x160x90, wooden handle BN Stainless bucket trowel 120x180x80, wooden handle BN Stainless bucket trowel 120x180x90, wooden handle BN Stainless internal angled trowel 75x110 mm, wooden handle BN Stainless internal angled trowel 97x120 mm, wooden handle BN Mortar mixing paddle 70x430mm, hexagonall shank BN Mortar mixing paddle 100x430mm BN Mortar mixing paddle 130x6050mm, thread M-14 BN

15 TOOLS Rolls for bucket BN Spiked aeration roller 110x150 mm BN053 2 Spiked aeration roller 110x700 mm BN

16 WALL SECTIONS EXAMPLES OF THE BOLIX PRODUCTS APPLICATIONS FLOOR BOLIX PE BOLIX PROCOLOR BOLIX SILICONE BOLIX SD POLYETHYLENE BACKER ROD HYDRONIC FLOOR HEATING BOLIX PC-B BOLIX N BOLIX HYDRO BOLIX HYDRO-T BOLIX E 6 7 BOLIX SILICONE 8 BOLIX SD POLYETHYLENE BACKER ROD ELECTRIC FLOOR HEATING BOLIX N BOLIX HYDRO 4 BOLIX HYDRO T 5 6 BOLIX SILICONE BOLIX SD POLYETHYLENE BACKER ROD

17 WALL SECTIONS EXAMPLES OF THE BOLIX PRODUCTS APPLICATIONS SHOWER CABIN BOLIX SN 20 BOLIX W BOLIX N BOLIX HYDRO-T BOLIX SE BOLIX SILICONE INSIDE SEALING CORNER TILING OVER TILES SEALING COLLAR BOLIX SD POLYETHYLENE BACKER ROD BOLIX BETOGRUNT BOLIX SE BOLIX PROCOLOR BOLIX SILICONE INSTALLATION TO DRYWALL BOLIX N BOLIX PROCOLOR BOLIX SE BOLIX SILICONE

18

19