MAGNA acdc1028. A compact, in-ground, triple LED marker light & wallwash luminaire delivering 350lm. IP68

Transcription

1 acdc1028 compact, in-ground, triple LED marker light & wallwash luminaire delivering 350lm. SPG307 May 2015

2 CONTENTS Product overview 05 pplication images 07 Detailed product performance 09 Product drawings and images 10 Specification codes 11 Driver information 13 Installation instructions 15 Specification sheet 19 Contact details

3 OVERVIEW compact, in-ground, triple LED marker light & wallwash luminaire delivering 350lm. vailable flush or bezel mounted, with or without visible screw holes Specified with a 7 tilt as standard, with a 0 tilt option available on request vailable with clear or frosted glass for minimal glare luminium CNC machined to aerospace tolerances. Suitable for installation in the most challenging of exterior environments High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70 This product is dual binned within a 2 step Macdam ellipse to ensure colour consistency range of optics is available to suit every application: 12, 18, 30, 50 Choice of bezel colour finishes available: stainless steel brushed. Extremely durable anodised aluminium silver, anodised aluminium black. For especially demanding environments use hard anodised silver, hard anodised black, chlorine anodised silver, chlorine anodised black Suitable for use in ambient temperatures ranging from -20ºC to 50ºC 5 6

4 Q House, Dublin, Ireland. Lighting Design: Pritchard Themis. acdc LED product: MGN (acdc1028) 7 8

5 PRODUCT PERFORMNCE MGN LED Type Cree LED Quantity 3 Drive Current 700m Power Consumption. Including 85% Efficient Driver 7.1W PFC Driver dependent (Typical 0.9) Colour Temp 2700ºK 3000ºK 4200ºK 6000ºK Initial Colour ccuracy 2 Step Macdam Ellipse Colour Stability Over Life. Measured at 6000hrs 2 Step Macdam Ellipse CRI Initial Lamp Lumen Output Initial Lamp Lumens per Circuit Watt Lamp Lumen Output including Thermal & Optical Losses c Lamp Lumens (Including Thermal & Optical Losses) per Circuit Watt Luminaire Lumen Output M Luminaire Lumens per Circuit Watt Lifetime L70. ased on TM-21 >50,000 hours Lumen Depreciation LIF Cat/Codes for % depreciation at 10,000hrs Cat1/Code9 ased Lamp on 3 12 D and K clear glass MGN - Flush Mounted MGN - Flush Mounted with Sleeve 30mm 66m 54mm 78mm Magna Flush Mouted with Sleeve Min depth 125mm 66mm MGN - ezel Mounted 90m Magna ezel Mouted ased on 3000 K and 12 66mm MGN - ezel Mounted with Sleeve UX TSI ll acdc products are independently tested in line with LM80 standards, 50,000 hours lifetime with lumen maintenance at L70 to guarantee product performance. Min depth 125mm 90mm Magna ezel Mounted With Sleeve Output data figures stated are typical values. To download photometric files please visit

6 SPECIFICTION CODES nodised luminium Silver nodised luminium lack Stainless Steel rushed Hard nodised Silver Hard nodised lack Finishes Chlorine nodised Silver Chlorine nodised lack LED Colour Order code MGN, nodised luminium Silver, 6000 K, 30, 7 Tilt, Flush Mounted with CSK Holes in ezel, Frosted Finishes nodised luminium Silver nodised luminium lack Stainless Steel rushed Hard nodised Silver* Hard nodised lack* Chlorine nodised Silver* Chlorine nodised lack* S SS HS H CS C acdc1028 / S /60/30R /7DEG /FMS/DGF RED 2700 K 3000 K 4200 K 6000 K GREEN LUE MER RG Optics LED Colour 2700ºK ºK ºK ºK 60 Red R Green G lue mber RG Colour Change RG 12º 18º 30º 50º Tilt Optics 12 12R 18 18R 30 30R 50 50R Flush Flush with Sleeve 0º ezel 7º Mounting ezel with Sleeve Diffuser Tilt 0 0DEG 7 7DEG Mounting Type Flush Mounted** Flush Mounted with CSK Holes in ezel*** ezel Mounted ezel Mounted with CSK Holes in ezel Diffuser Clear Frosted FMF FMS MF MS DGC DGF Clear Frosted dditional Option Installation Sleeve Option acdc1703 Emergency Pack For an emergency conversion pack please specify acdc1957 *Upon request, minimum order quantities apply **Not for use with sleeve ***For use with installation sleeve only 11 12

7 SPECIFICTION CODES Switched Live Neutral 1-10v Live Neutral Phase Live Neutral DLI Live Neutral DMX Live Neutral Ground DMX in - DMX in + DMX in shield Dimmer 1-10v Dimmer Dali us Isolated Dali Interface 3 LED Groups 3 Control Channels Switched MGN Driver Code acdc1900//700/swt/none acdc1900//700/swt/none Dimensions 110 x 52 x 23.5 mm 180 x 32 x 32 mm Weight 100g 120g Input Voltage Vac Vrms Current 700m 700m Power Consumption 230V 33W Dimming Range None None Channels 1 1 Number of products driven per driver v MGN Driver Code acdc1900//700/1-10/solo acdc1900//700/swt/none Dimensions 110 x 52 x 23.5 mm 180 x 32 x 32 mm Weight 100g 120g Input Voltage Vac Vrms Current 700m 700m Power Consumption 230V 33W Dimming Range 0%-100% None Channels 1 1 Number of products driven per driver Phase MGN Driver Code acdc1900//700/pha/none acdc1900//700/swt/none Dimensions 99mm x 39mm x 23.5mm 180 x 32 x 32 mm Weight 70g 120g Input Voltage V C Vrms Current 700m 700m Power Consumption 10.5W max 33W Dimming Range Min 20% None Channels 1 1 Number of products driven per driver DLI MGN Driver Code acdc1900//700/dali/solo acdc1900/c/700/dli/solo Dimensions 210 x 40.4 x 33.5mm 180 x 32 x 32 mm Weight 225g 120g Input Voltage C V / DC V Vrms Current 700m 700m Power Consumption 30w 30W Dimming Range 0%-100% Off, 10%-100% Channels 1 1 Number of products driven per driver DMX MGN Driver Code acdc1900/e/700/dmx/multi Dimensions 388 x 42 x 30 mm Weight 705 g Input Voltage VC Current 700 Power Consumption 100W max Dimming Range 0.1%-100% Channels 3 Number of products driven per driver 4 per Ch x 3ch 13 ll images shown above are for illustrative purposes only. 14 Please refer to installation instructions for complete details

8 INSTLLTION INSTRUCTIONS 8000mm MGN- Sleeveless 1 T 6000mm 4000mm ø66mm 30mm 7º 2000mm 2 Ch1 Ch2 Ch Magna 2000mm 0.5mm2 rown lack RG 0.22mm 2 Red lack Green Yellow lue White 3 90mm ø54mm 50mm 100mm 150mm 200mm 300mm Only to be installed by a qualified electrician Installation must be carried out in accordance with local regulations Turn off mains power to the driver during installation and any subsequent dis-connecting or re-connecting at the fitting Use correct polarity when wiring. If in any doubt contact the installation helpline +44 (0) Do not cover the luminaires or drivers with thermal insulation or vapour barrier (see air space guidance) acdc luminaires are designed for lighting applications and must not be used for any other purpose

9 INSTLLTION INSTRUCTIONS MGN flush with Sleeve 1 MGN bezel with Sleeve 1 T ø58mm ø58mm 125mm 25mm Ch1 Ch2 Ch Magna 2000mm 0.5mm2 rown lack RG 0.22mm 2 Red lack Green Yellow lue White Ch1 Ch2 Ch Magna 2000mm 0.5mm2 rown lack RG 0.22mm 2 Red lack Green Yellow lue White P

10 Specification sheet MGN acdc1028 compact, in-ground, triple LED marker light & wallwash luminaire delivering 350lm. Flush mounted Flush with sleeve ezel mounted ezel with sleeve 66m 78mm 90m 90mm Min depth 125mm Min depth 125mm 30mm 54mm 66mm 66mm Luminaire Material: luminium CNC machined to aerospace tolerances Finish: ezel colour options: stainless steel brushed. Extremely durable anodised aluminium silver, anodised aluminium black. For especially demanding environments use hard anodised silver*, hard anodised black*, chlorine anodised silver*, chlorine anodised black* Format: vailable flush or bezel mounted, with or without visible screw holes. eam angles: 12, 18, 30, 50. ccessories: Installation sleeve - acdc1703 Installation: Suitable for installation in the most challenging of exterior environments. djustability: Specified with a 7 tilt as standard, with 0 tilt option. Temperature range: From -20 C to 50 C Cut out: See drawing above *Upon request. Minimum order quantity applies. Specification Codes Performance Lumen Maintenance: High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70. Initial lamp Lumen output*: 438lm Lamp lumens inc thermal and optical losses*: 372lm Luminaire Lumens output*: 331lm Power consumption (inc 85% efficient driver): 7.1W Efficacy (Lm/W)*: 47 CRI: 80 inning: Dual binned for optimum colour consistency across a project - 2 step Macdam ellipse. LED Colour: 2700ºK, 3000ºK, 4200ºK, 6000ºK, R, G,,, RG Driver: Switched, 1-10v, Phase, Dali, DMX Listings: CE, ETL us/c IP rating: Warranty: 5 years Weight: Stainless steel bezel 550g, luminium flush 430g *based on 3000ºK with 12º optics Product acdc1028 ezel Finishes nodised luminium Silver nodised luminium lack Stainless Steel rushed Hard nodised Silver Hard nodised lack Chlorine nodised Silver Choline nodised lack S SS HS H CS C LED Colour 2700ºK ºK ºK ºK 60 R R G G RG RG Optics 12º 12R 18º 18R 30º 30R 50º 50R Tilt 0º 0DEG 7º 7DEG Mounting Type Flush Mounted Flush mounted with CSK Holes in ezel ezel Mounted ezel Mounted with CSK Holes in ezel FMF FMS MF MS Diffuser Clear Glass DGC Frosted Glass DGF acdc1028 dditional option: Installation sleeve acdc1703 Driver options Driver acdc1900 No. of Luminaires if known Current 700m Dimming Type SWT 1-10 Phase DLI DMX acdc m Specification subject to change without notice. Refer to our website for the most recent product documentation. acdclighting.com sales@acdclighting.com UK: +44 (0) US: +1 (410) Dubai: +971 (0) SPG307 May 2015

11 CONTCT Head Office Wordsworth House Vantage Court, Riverside Way arrowford Lancashire UK 9 6P Tel: +44 (0) Fax: +44 (0) sales@acdclighting.co.uk Manufacturing Innovation Works Gisburn Road arrowford Lancashire UK 9 8N Tel: +44 (0) London Studio Ground Floor Central lock Green Mews evenden Street London N1 6S Sales Tel: +44 (0) Deliveries Tel: +44 (0) london@acdclighting.co.uk Dubai Office Office 405, Goldcrest Executive Tower Cluster C - Jumeirah Lakes Towers (JLT) P.O. ox Dubai United rab Emirates US Office acdc corp, 841 E Fort ve, #276 altimore, MD US Tel: +971 (0) export@acdclighting.co.uk Tel: +1 (410) sales@acdclighting.us Global Distribution Network We have an established and growing global network of over 60 distributors and consider them a vital extension to our ritish, Dubai and North merican based export teams. This ensures that all customers receive the same outstanding level of world-class service and knowledge regardless of the location of your project. For contact details of our distribution partners, please visit acdclighting.com/contact/distribution-network/ or contact export@acdclighting.co.uk Specification subject to change without notice. Refer to our website for the most recent product documentation